firmware/export/config/sansaclipv2.h

   1 /*
   2  * This config file is for the Sandisk Sansa Clip v2
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 66
   8 #define MODEL_NAME   "Sandisk Sansa Clipv2"
   9 #define FIRMWARE_OFFSET_FILE_DATA 8
  10 #define FIRMWARE_OFFSET_FILE_CRC 0
  11
  12 #if 0 /* disabled since there is no driver (yet) */
  13
  14 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  20 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  21 #define REC_SAMPR_DEFAULT   SAMPR_22
  22
  23 #endif
  24
  25 /* Define bitmask of input sources - recordable bitmask can be defined
  26    explicitly if different */
  27 #define INPUT_SRC_CAPS (SRC_CAP_MIC /*| SRC_CAP_FMRADIO*/)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a light associated with the buttons */
  33 #define HAVE_BUTTON_LIGHT
  34
  35 /* define this if you have access to the quickscreen */
  36 #define HAVE_QUICKSCREEN
  37
  38 /* define this if you have access to the pitchscreen */
  39 #define HAVE_PITCHSCREEN
  40
  41 /* define this if you would like tagcache to build on this target */
  42 #define HAVE_TAGCACHE
  43
  44 /* LCD dimensions */
  45 #define LCD_WIDTH  128
  46 #define LCD_HEIGHT 64
  47 #define LCD_DEPTH  1
  48
  49 #define LCD_PIXELFORMAT VERTICAL_PACKING
  50 #define HAVE_NEGATIVE_LCD /* bright on dark */
  51 #define HAVE_LCD_SPLIT    /* split display */
  52
  53 /* Display colours, for screenshots and sim (0xRRGGBB) */
  54 #define LCD_DARKCOLOR        0x000000
  55 #define LCD_BRIGHTCOLOR      0x000000
  56 #define LCD_BL_DARKCOLOR     0x000000
  57 #define LCD_BL_BRIGHTCOLOR   0x0de2e5
  58
  59 #define LCD_DARKCOLOR_2       0x000000
  60 #define LCD_BRIGHTCOLOR_2     0x000000
  61 #define LCD_BL_DARKCOLOR_2    0x000000
  62 #define LCD_BL_BRIGHTCOLOR_2  0xffe60f
  63
  64 #define LCD_SPLIT_POS    16
  65 #define LCD_SPLIT_LINES  2
  66
  67 /* define this if you have LCD enable function */
  68 #define HAVE_LCD_ENABLE
  69
  70 #ifndef BOOTLOADER
  71 /* Define this if your LCD can be put to sleep.
  72  * HAVE_LCD_ENABLE should be defined as well. */
  73 //#define HAVE_LCD_SLEEP
  74 //#define HAVE_LCD_SLEEP_SETTING
  75 #endif
  76
  77 /* define this if you can flip your LCD */
  78 #define HAVE_LCD_FLIP
  79
  80 /* define this if you can invert the pixels */
  81 #define HAVE_LCD_INVERT
  82
  83 /* Define this if your LCD can set contrast */
  84 #define HAVE_LCD_CONTRAST
  85
  86 #define MIN_CONTRAST_SETTING        0
  87 #define MAX_CONTRAST_SETTING        50
  88 #define DEFAULT_CONTRAST_SETTING    30
  89
  90 #define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
  91
  92 #define CONFIG_KEYPAD SANSA_CLIP_PAD
  93
  94 /* define this if the target has volume keys which can be used in the lists */
  95 #define HAVE_VOLUME_IN_LIST
  96
  97 /* Define this if you do software codec */
  98 #define CONFIG_CODEC SWCODEC
  99 /* There is no hardware tone control */
 100 #define HAVE_SW_TONE_CONTROLS
 101
 102 /* We're working on the assumption that the AS3525 has something
 103    similar to the AS3514 for audio codec etc */
 104 #define HAVE_AS3514
 105
 106 /* define this if you have a real-time clock */
 107 #ifndef BOOTLOADER
 108 #define CONFIG_RTC RTC_AS3514
 109 #endif
 110
 111 /* Define this if you have a software controlled poweroff */
 112 #define HAVE_SW_POWEROFF
 113
 114 #define HAVE_FAT16SUPPORT
 115
 116 /* The number of bytes reserved for loadable codecs */
 117 #define CODEC_SIZE 0x100000
 118
 119 /* The number of bytes reserved for loadable plugins */
 120 #define PLUGIN_BUFFER_SIZE 0x80000
 121
 122 #define AB_REPEAT_ENABLE 1
 123
 124 /* FM Tuner */
 125 //#define CONFIG_TUNER SI4700 /* in fact SI4702 */
 126 //#define HAVE_TUNER_PWR_CTRL
 127
 128 /* Define this for LCD backlight available */
 129 #define HAVE_BACKLIGHT
 130
 131 /* define this if you have a flash memory storage */
 132 #define HAVE_FLASH_STORAGE
 133
 134 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 135 #define CONFIG_STORAGE STORAGE_SD
 136
 137 #define BATTERY_CAPACITY_DEFAULT 380    /* default battery capacity */
 138 #define BATTERY_CAPACITY_MIN 380        /* min. capacity selectable */
 139 #define BATTERY_CAPACITY_MAX 380        /* max. capacity selectable */
 140 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 141 #define BATTERY_TYPES_COUNT  1          /* only one type */
 142
 143 /* Charging implemented in a target-specific algorithm */
 144 #define CONFIG_CHARGING CHARGING_TARGET
 145
 146 /* define this if the unit can be powered or charged via USB */
 147 #define HAVE_USB_POWER
 148
 149 /** Non-simulator section **/
 150 #ifndef SIMULATOR
 151
 152 /* Define this if you have a AMS AS3525v2 SoC */
 153 #define CONFIG_CPU AS3525v2
 154
 155 /* Define this if you want to use the AS3525 i2c interface */
 156 #define CONFIG_I2C I2C_AS3525   /* FIXME : looks similar to AS353x interface */
 157
 158 /* define this if the hardware can be powered off while charging */
 159 /* Sansa can't be powered off while charging */
 160 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 161
 162 /* The start address index for ROM builds */
 163 #define ROM_START 0x00000000
 164
 165 /* Define this to the CPU frequency */
 166 #define CPU_FREQ      250000000
 167
 168 /* Type of LCD */
 169 #define CONFIG_LCD LCD_SSD1303
 170
 171 #ifndef BOOTLOADER
 172
 173 #define USB_HANDLED_BY_OF
 174
 175 #if 0 /* disabled since there is no USB driver */
 176
 177 /* USB On-the-go */
 178 #define CONFIG_USBOTG USBOTG_ARC
 179
 180 /* enable these for the experimental usb stack */
 181 #define HAVE_USBSTACK
 182 #define USB_VENDOR_ID 0x0781
 183 #define USB_PRODUCT_ID 0x7433
 184 #endif /* BOOTLOADER */
 185
 186 #endif
 187
 188
 189 /* Virtual LED (icon) */
 190 #define CONFIG_LED LED_VIRTUAL
 191
 192 /* Define this if you have adjustable CPU frequency */
 193 #define HAVE_ADJUSTABLE_CPU_FREQ
 194
 195 #define BOOTFILE_EXT    "sansa"
 196 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 197 #define BOOTDIR "/.rockbox"
 198
 199 #define ICODE_ATTR_TREMOR_NOT_MDCT
 200
 201 #define INCLUDE_TIMEOUT_API
 202
 203 #endif /* SIMULATOR */
 204
 205 /** Port-specific settings **/
 206
 207 /* Main LCD backlight brightness range and defaults */
 208 #define MIN_BRIGHTNESS_SETTING      1
 209 #define MAX_BRIGHTNESS_SETTING     12
 210 #define DEFAULT_BRIGHTNESS_SETTING  6
 211
 212 /* Default recording levels */
 213 #define DEFAULT_REC_MIC_GAIN    23
 214 #define DEFAULT_REC_LEFT_GAIN   23
 215 #define DEFAULT_REC_RIGHT_GAIN  23