firmware/export/config/samsungyps3.h

   1 /*
   2  * This config file is for Samsung YP-S3
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 53
   9
  10 #define MODEL_NAME   "Samsumg YP-S3"
  11
  12 /* define this if you have recording possibility */
  13 //#define HAVE_RECORDING
  14
  15 /* Define bitmask of input sources - recordable bitmask can be defined
  16    explicitly if different */
  17 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  18
  19 /* define the bitmask of hardware sample rates */
  20 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  21
  22 /* define the bitmask of recording sample rates */
  23 #define REC_SAMPR_CAPS  (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  24
  25 /* define this if you have a bitmap LCD display */
  26 #define HAVE_LCD_BITMAP
  27
  28 /* define this if you can flip your LCD */
  29 //#define HAVE_LCD_FLIP
  30
  31 /* define this if you have a colour LCD */
  32 #define HAVE_LCD_COLOR
  33
  34 /* define this if you want album art for this target */
  35 #define HAVE_ALBUMART
  36
  37 /* define this to enable bitmap scaling */
  38 #define HAVE_BMP_SCALING
  39
  40 /* define this to enable JPEG decoding */
  41 #define HAVE_JPEG
  42
  43 /* define this if you can invert the colours on your LCD */
  44 //#define HAVE_LCD_INVERT
  45
  46 /* define this if you have access to the quickscreen */
  47 #define HAVE_QUICKSCREEN
  48
  49 /* define this if you have access to the pitchscreen */
  50 #define HAVE_PITCHSCREEN
  51
  52 /* define this if you would like tagcache to build on this target */
  53 #define HAVE_TAGCACHE
  54
  55 /* define this if you have a flash memory storage */
  56 #define HAVE_FLASH_STORAGE
  57
  58 #define CONFIG_STORAGE STORAGE_NAND
  59
  60 #define CONFIG_NAND NAND_SAMSUNG
  61
  62 /* LCD dimensions */
  63 #define LCD_WIDTH  176
  64 #define LCD_HEIGHT 220
  65 #define LCD_DEPTH  16   /* pseudo 262.144 colors */
  66 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  67
  68 /* Define this if your LCD can be enabled/disabled */
  69 //#define HAVE_LCD_ENABLE
  70
  71 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  72    should be defined as well. */
  73 //#define HAVE_LCD_SLEEP
  74
  75 /* We have button lights */
  76 #define HAVE_BUTTON_LIGHT
  77
  78 #define CONFIG_KEYPAD MEIZU_M3_PAD
  79
  80 /* We have headphone detection */
  81 #define HAVE_HEADPHONE_DETECTION
  82
  83 //#define AB_REPEAT_ENABLE 1
  84 //#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  85
  86 /* Define this if you do software codec */
  87 #define CONFIG_CODEC SWCODEC
  88
  89 /* define this if you have a real-time clock */
  90 #define CONFIG_RTC RTC_S35390A
  91
  92 /* Define the type of audio codec */
  93 //#define HAVE_WM....
  94
  95 /* Define this for LCD backlight available */
  96 #define HAVE_BACKLIGHT
  97 #define HAVE_BACKLIGHT_BRIGHTNESS
  98
  99 /* Define this if you have a software controlled poweroff */
 100 #define HAVE_SW_POWEROFF
 101
 102 /* The number of bytes reserved for loadable codecs */
 103 #define CODEC_SIZE 0x100000
 104
 105 /* The number of bytes reserved for loadable plugins */
 106 #define PLUGIN_BUFFER_SIZE 0x80000
 107
 108 /* FM Tuner */
 109 #define CONFIG_TUNER       SI4700
 110 #define CONFIG_TUNER_XTAL  32768
 111
 112 /* assume no tone controls, so we use the software ones */
 113 #define HAVE_SW_TONE_CONTROLS
 114
 115 #define BATTERY_CAPACITY_DEFAULT 580 /* default battery capacity */
 116 #define BATTERY_CAPACITY_MIN     580   /* min. capacity selectable */
 117 #define BATTERY_CAPACITY_MAX     580  /* max. capacity selectable */
 118 #define BATTERY_CAPACITY_INC     0    /* capacity increment */
 119 #define BATTERY_TYPES_COUNT      1     /* only one type */
 120
 121 /* Hardware controlled charging, software can monitor plug and charge state */
 122 #define CONFIG_CHARGING CHARGING_MONITOR
 123
 124 /* Define this if your LCD can set contrast */
 125 //#define HAVE_LCD_CONTRAST
 126
 127 /* We have a Samsung S5L8700 */
 128 #define CONFIG_CPU S5L8700
 129
 130 /* We use the S5L8700 i2c interface */
 131 #define CONFIG_I2C I2C_S5L8700
 132
 133 /* define this if the hardware can be powered off while charging */
 134 //#define HAVE_POWEROFF_WHILE_CHARGING
 135
 136 /* The size of the flash ROM */
 137 #define FLASH_SIZE 0x400000
 138
 139 /* Define this to the CPU frequency */
 140 #define CPU_FREQ      200000000
 141
 142 /* Define this if you have ATA power-off control */
 143 //#define HAVE_ATA_POWER_OFF
 144
 145 /* Offset ( in the firmware file's header ) to the file CRC */
 146 #define FIRMWARE_OFFSET_FILE_CRC 0
 147
 148 /* Offset ( in the firmware file's header ) to the real data */
 149 #define FIRMWARE_OFFSET_FILE_DATA 8
 150
 151 /* USB */
 152 //#define HAVE_USBSTACK
 153 #define USE_ROCKBOX_USB
 154 #define USB_VENDOR_ID 0x04E8
 155 #define USB_PRODUCT_ID 0x5090
 156
 157 /* Define this if you have adjustable CPU frequency */
 158 #define HAVE_ADJUSTABLE_CPU_FREQ
 159
 160 #define BOOTFILE_EXT "yps3"
 161 #define BOOTFILE "rockbox." BOOTFILE_EXT
 162 #define BOOTDIR "/.rockbox"
 163
 164 //#define BOOTLOADER_ENTRYPOINT  0x001F0000
 165 //#define FLASH_ENTRYPOINT       0x00001000
 166 //#define FLASH_MAGIC            0xfbfbfbf1
 167
 168 /* Define this for FM radio input available */
 169 #define HAVE_FMRADIO_IN
 170
 171 /** Port-specific settings **/
 172
 173 /* Main LCD contrast range and defaults */
 174 #define MIN_CONTRAST_SETTING        1
 175 #define MAX_CONTRAST_SETTING        30
 176 #define DEFAULT_CONTRAST_SETTING    19 /* Match boot contrast */
 177
 178 /* Main LCD backlight brightness range and defaults */
 179 #define MIN_BRIGHTNESS_SETTING      0
 180 #define MAX_BRIGHTNESS_SETTING      15
 181 #define DEFAULT_BRIGHTNESS_SETTING  10
 182
 183 /* Define this if a programmable hotkey is mapped */
 184 #define HAVE_HOTKEY