manual/getting_started/cowond2_install.tex

   1 \begin{enumerate}
   2 \item Get a copy of the original \playerman{} \playertype{} firmware from
   3   \url{http://www.cowonglobal.com/zeroboard/zboard.php?id=C08&bmenu=support}.
   4   It has to be of the same version that is currently installed on your \dap{}.
   5
   6 \item Build the mktccboot tool or download a binary for your operating system.
   7
   8 \item Build the bootloader (\fname{bootloader-cowond2.bin}). Pre-built binary
   9   is available at \download{bootloader/cowon/d2/bootloader-cowond2.bin}.
  10
  11 \item Patch the bootloader into the \playerman{} firmware using mktccboot:
  12   \begin{code}
  13     mktccboot D2N.bin bootloader-cowond2.bin D2N-patched.bin
  14   \end{code}
  15   \note{The filename depends on the firmware version and hardware revision as
  16     shown in the table below (for the \playertype{} use the file found in folder
  17     ``\fname{1}'', not ``\fname{0}'')
  18     \begin{table}
  19       \begin{rbtabular}{0.6\textwidth}{XXX}%
  20         { \textbf{FW / HW} & \textbf{\playertype{}} & \textbf{\playertype{}+}}{}{}
  21         \textbf{1.xx, 3.xx} & \fname{D2.bin} & \fname{D2\_P.bin} \\
  22         \textbf{2.xx, 4.xx} & \fname{D2N.bin} & \fname{D2N\_P.bin} \\
  23       \end{rbtabular}
  24     \end{table}}
  25
  26 \item Copy the output file (``\fname{D2N-patched.bin}'' in our example) to the
  27   root of the \daps{} internal memory and rename it according to the above table.
  28 \end{enumerate}