firmware/export/config/lyreproto1.h

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  *
   9  *
  10  * Copyright (C) 2009 by Jorge Pinto
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21
  22 /*
  23  * This config file is for the Lyre prototype 1.
  24  */
  25 #define TARGET_TREE /* this target is using the target tree system */
  26
  27 #define CONFIG_SDRAM_START 0x20000000
  28
  29 /* For Rolo and boot loader */
  30 #define MODEL_NUMBER 130
  31
  32 /* define this if the flash memory uses the
  33  * SecureDigital Memory Card protocol */
  34 #define CONFIG_STORAGE STORAGE_SD
  35 #define HAVE_FLASH_STORAGE
  36
  37 /* define this if you have a bitmap LCD display */
  38 #define HAVE_LCD_BITMAP
  39
  40 /* define this if you have a colour LCD */
  41 #define HAVE_LCD_COLOR
  42
  43 #define CONFIG_LCD LCD_LYRE_PROTO1
  44
  45 /* LCD dimensions */
  46 #define LCD_WIDTH  128
  47 #define LCD_HEIGHT 128
  48 /* The LCD used is just rgb444, 64 colours. We do a bit conversion on LCD
  49  * drivers. */
  50 #define LCD_DEPTH  16   /* 65536 colours */
  51 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  52
  53 #define HAVE_ALBUMART
  54
  55 /* define this to enable bitmap scaling */
  56 #define HAVE_BMP_SCALING
  57
  58 /* define this to enable JPEG decoding */
  59 #define HAVE_JPEG
  60
  61 #define CONFIG_KEYPAD LYRE_PROTO1_PAD
  62
  63 /* Define this if you do software codec */
  64 #define CONFIG_CODEC SWCODEC
  65
  66 /* The number of bytes reserved for loadable codecs */
  67 #define CODEC_SIZE 0x100000
  68
  69 /* The number of bytes reserved for loadable plugins */
  70 #define PLUGIN_BUFFER_SIZE 0x100000
  71
  72 /* Lyre prototype 1 do not use I2C, just SPI */
  73 #define CONFIG_I2C I2C_NONE
  74
  75 /* Define this if you have the TLV320 audio codec -> controlled by the DSP */
  76 #define HAVE_TLV320
  77
  78 /* TLV320 has no tone controls, so we use the software ones */
  79 #define HAVE_SW_TONE_CONTROLS
  80
  81 #define BATTERY_CAPACITY_DEFAULT 1100 /* default battery capacity */
  82 #define BATTERY_CAPACITY_MIN 500        /* min. capacity selectable */
  83 #define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
  84 #define BATTERY_CAPACITY_INC 100         /* capacity increment */
  85 #define BATTERY_TYPES_COUNT  1          /* only one type */
  86
  87 #define CONFIG_CPU AT91SAM9260
  88
  89 /* Define this to the CPU frequency */
  90 #define CPU_FREQ 198656000
  91 #define MCK_FREQ 99328000
  92 #define SLOW_CLOCK 32768
  93
  94 /* Offset ( in the firmware file's header ) to the file CRC */
  95 #define FIRMWARE_OFFSET_FILE_CRC 0
  96
  97 /* Offset ( in the firmware file's header ) to the real data */
  98 #define FIRMWARE_OFFSET_FILE_DATA 8
  99
 100 #define BOOTFILE_EXT "lyre_proto1"
 101 #define BOOTFILE "rockbox." BOOTFILE_EXT
 102 #define BOOTDIR "/.rockbox"
 103
 104 /* Define this if a programmable hotkey is mapped */
 105 //#define HAVE_HOTKEY