firmware/export/config/archosplayer.h

   1 /* define this if you use an ATA controller */
   2 #define CONFIG_STORAGE STORAGE_ATA
   3
   4 #define MODEL_NAME   "Archos Player/Studio"
   5
   6 /* define this if you have a charcell LCD display */
   7 #define HAVE_LCD_CHARCELLS
   8
   9 /* define this if you would like tagcache to build on this target */
  10 #define HAVE_TAGCACHE
  11
  12 #define LCD_WIDTH  11
  13 #define LCD_HEIGHT  2
  14 #define LCD_DEPTH   1
  15 #define SIM_LCD_WIDTH  132 /* pixels */
  16 #define SIM_LCD_HEIGHT  64 /* pixels */
  17
  18 /* Display colours, for screenshots and sim (0xRRGGBB) */
  19 #define LCD_DARKCOLOR       0x000000
  20 #define LCD_BRIGHTCOLOR     0x5a915a
  21 #define LCD_BL_DARKCOLOR    0x000000
  22 #define LCD_BL_BRIGHTCOLOR  0x7ee57e
  23
  24 /* define this if you have the Player's keyboard */
  25 #define CONFIG_KEYPAD PLAYER_PAD
  26
  27 #define AB_REPEAT_ENABLE 1
  28 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  29
  30 /* The number of bytes reserved for loadable plugins */
  31 #define PLUGIN_BUFFER_SIZE 0x8000
  32
  33 /* Define this if you have a MAS3507D */
  34 #define CONFIG_CODEC MAS3507D
  35
  36 /* Define this if you have a DAC3550A */
  37 #define HAVE_DAC3550A
  38
  39 /* define this if you have a disk storage, i.e. something
  40    that needs spinups and can cause skips when shaked */
  41 #define HAVE_DISK_STORAGE
  42
  43 /* Define this for LCD backlight available */
  44 #define HAVE_BACKLIGHT
  45
  46 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
  47 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
  48 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
  49 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  50 #define BATTERY_TYPES_COUNT  1    /* only one type */
  51
  52 #define CURRENT_NORMAL    145  /* usual current in mA */
  53 #define CURRENT_USB       500 /* usual current in mA in USB mode */
  54
  55 /* define this if the unit should not shut down on low battery. */
  56 #define NO_LOW_BATTERY_SHUTDOWN
  57
  58 /* Hardware controlled charging */
  59 #define CONFIG_CHARGING CHARGING_SIMPLE
  60
  61 /* Define this if you have a SH7034 */
  62 #define CONFIG_CPU SH7034
  63
  64 /* Define this if you control ata power player style
  65    (with PB4, new player only) */
  66 #define ATA_POWER_PLAYERSTYLE
  67
  68 /* Define this to the CPU frequency */
  69 #define CPU_FREQ 12000000 /* cycle time ~83.3ns */
  70
  71 /* Define this if you must discharge the data line by driving it low
  72    and then set it to input to see if it stays low or goes high */
  73 #define HAVE_I2C_LOW_FIRST
  74
  75 #define CONFIG_I2C I2C_PLAYREC
  76
  77 /* Offset ( in the firmware file's header ) to the file length */
  78 #define FIRMWARE_OFFSET_FILE_LENGTH 0
  79
  80 /* Offset ( in the firmware file's header ) to the file CRC */
  81 #define FIRMWARE_OFFSET_FILE_CRC 4
  82
  83 /* Offset ( in the firmware file's header ) to the real data */
  84 #define FIRMWARE_OFFSET_FILE_DATA 6
  85
  86 /* The start address index for ROM builds */
  87 #define ROM_START 0x7010 /* for behind BootBox */
  88
  89 /* Software controlled LED */
  90 #define CONFIG_LED LED_REAL
  91
  92 #define CONFIG_LCD LCD_SSD1801
  93
  94 #define BOOTFILE_EXT "mod"
  95 #define BOOTFILE "archos." BOOTFILE_EXT
  96 #define BOOTDIR "/"
  97
  98 #define HAVE_LCD_CONTRAST
  99
 100 #define MIN_CONTRAST_SETTING        5
 101 #define MAX_CONTRAST_SETTING        31
 102 #define DEFAULT_CONTRAST_SETTING    30
 103
 104 #define HAVE_SERIAL
 105
 106 /* Define this if a programmable hotkey is mapped */
 107 #define HAVE_HOTKEY