firmware/export/config-ipodnano.h

   1 /*
   2  * This config file is for the Apple iPod Nano
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Nano 1g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 4
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  25
  26 /* define the bitmask of recording sample rates */
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this to enable bitmap scaling */
  39 #define HAVE_BMP_SCALING
  40
  41 /* define this to enable JPEG decoding */
  42 #define HAVE_JPEG
  43
  44 /* define this if you have access to the quickscreen */
  45 #define HAVE_QUICKSCREEN
  46 /* define this if you have access to the pitchscreen */
  47 #define HAVE_PITCHSCREEN
  48
  49 /* define this if you would like tagcache to build on this target */
  50 #define HAVE_TAGCACHE
  51
  52 /* LCD dimensions */
  53 #define LCD_WIDTH  176
  54 #define LCD_HEIGHT 132
  55 #define LCD_DEPTH  16   /* 65536 colours */
  56 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  57
  58 /* LCD stays visible without backlight - simulator hint */
  59 #define HAVE_TRANSFLECTIVE_LCD
  60
  61 #define CONFIG_KEYPAD IPOD_4G_PAD
  62
  63 /* Define this if you do software codec */
  64 #define CONFIG_CODEC SWCODEC
  65
  66 /* define this if you have a real-time clock */
  67 #define CONFIG_RTC RTC_PCF50605
  68
  69 /* Define if the device can wake from an RTC alarm */
  70 #define HAVE_RTC_ALARM
  71
  72 /* Define this if you can switch on/off the accessory power supply */
  73 #define HAVE_ACCESSORY_SUPPLY
  74
  75 /* Define this if you have a software controlled poweroff */
  76 #define HAVE_SW_POWEROFF
  77
  78 /* The number of bytes reserved for loadable codecs */
  79 #define CODEC_SIZE 0x100000
  80
  81 /* The number of bytes reserved for loadable plugins */
  82 #define PLUGIN_BUFFER_SIZE 0x80000
  83
  84 /* Define this if you have the WM8975 audio codec */
  85 #define HAVE_WM8975
  86
  87 #define AB_REPEAT_ENABLE 1
  88 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  89
  90 /* Define this for LCD backlight available */
  91 #define HAVE_BACKLIGHT
  92 #define HAVE_BACKLIGHT_BRIGHTNESS
  93 /* We can fade the backlight by using PWM */
  94 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  95
  96 /* Main LCD backlight brightness range and defaults */
  97 #define MIN_BRIGHTNESS_SETTING      1
  98 #define MAX_BRIGHTNESS_SETTING      32
  99 #define DEFAULT_BRIGHTNESS_SETTING  16
 100
 101 /* define this if the unit uses a scrollwheel for navigation */
 102 #define HAVE_SCROLLWHEEL
 103 /* define to activate advanced wheel acceleration code */
 104 #define HAVE_WHEEL_ACCELERATION
 105 /* define from which rotation speed [degree/sec] on the acceleration starts */
 106 #define WHEEL_ACCEL_START 270
 107 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 108 #define WHEEL_ACCELERATION 3
 109
 110 /* Define this if you can detect headphones */
 111 #define HAVE_HEADPHONE_DETECTION
 112
 113 /* define this if you have a flash memory storage */
 114 #define HAVE_FLASH_STORAGE
 115
 116 #define BATTERY_CAPACITY_DEFAULT 300   /* default battery capacity */
 117 #define BATTERY_CAPACITY_MIN     200   /* min. capacity selectable */
 118 #define BATTERY_CAPACITY_MAX     600   /* max. capacity selectable */
 119 #define BATTERY_CAPACITY_INC      20    /* capacity increment */
 120 #define BATTERY_TYPES_COUNT        1   /* only one type */
 121
 122 /* Hardware controlled charging? FIXME */
 123 //#define CONFIG_CHARGING CHARGING_SIMPLE
 124
 125 /* define this if the unit can be powered or charged via USB */
 126 #define HAVE_USB_POWER
 127
 128 #define CURRENT_NORMAL     32  /* MP3: ~9h playback out of 300mAh battery */
 129 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 130 #if defined(HAVE_RECORDING)
 131 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 132 #endif
 133
 134 #ifndef SIMULATOR
 135
 136 /* Define this if you have a PortalPlayer PP5022 */
 137 #define CONFIG_CPU PP5022
 138
 139 /* Define this if you want to use the PP5020 i2c interface */
 140 #define CONFIG_I2C I2C_PP5020
 141
 142 /* define this if the hardware can be powered off while charging */
 143 //#define HAVE_POWEROFF_WHILE_CHARGING
 144
 145 /* The start address index for ROM builds */
 146 #define ROM_START 0x00000000
 147
 148 /* The size of the flash ROM */
 149 #define FLASH_SIZE 0x100000
 150
 151 /* Define this to the CPU frequency */
 152 #define CPU_FREQ      24000000
 153
 154 #define CONFIG_LCD LCD_IPODNANO
 155
 156 /* Offset ( in the firmware file's header ) to the file length */
 157 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 158
 159 /* Offset ( in the firmware file's header ) to the file CRC */
 160 #define FIRMWARE_OFFSET_FILE_CRC 0
 161
 162 /* Offset ( in the firmware file's header ) to the real data */
 163 #define FIRMWARE_OFFSET_FILE_DATA 8
 164
 165 /* USB On-the-go */
 166 #define CONFIG_USBOTG USBOTG_ARC
 167
 168 /* enable these for the experimental usb stack */
 169 #define HAVE_USBSTACK
 170 #define USE_ROCKBOX_USB
 171 #define USB_VENDOR_ID 0x05ac
 172 #define USB_PRODUCT_ID 0x120a
 173
 174 /* Virtual LED (icon) */
 175 #define CONFIG_LED LED_VIRTUAL
 176
 177 /* Define this if you have adjustable CPU frequency */
 178 #define HAVE_ADJUSTABLE_CPU_FREQ
 179
 180 /* Define this if you can read an absolute wheel position */
 181 #define HAVE_WHEEL_POSITION
 182
 183 #define BOOTFILE_EXT "ipod"
 184 #define BOOTFILE "rockbox." BOOTFILE_EXT
 185 #define BOOTDIR "/.rockbox"
 186
 187 #define ICODE_ATTR_TREMOR_NOT_MDCT
 188
 189 #define IPOD_ACCESSORY_PROTOCOL
 190 #define HAVE_SERIAL
 191
 192 #endif