firmware/export/config-ipod4g.h

   1 /*
   2  * This config file is for the Apple iPod 4g Grayscale
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod 4g Grayscale"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 8
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  25
  26 /* define the bitmask of recording sample rates */
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you want album art for this target */
  33 #define HAVE_ALBUMART
  34
  35 /* define this to enable bitmap scaling */
  36 #define HAVE_BMP_SCALING
  37
  38 /* define this to enable JPEG decoding */
  39 #define HAVE_JPEG
  40
  41 /* define this if you can invert the colours on your LCD */
  42 #define HAVE_LCD_INVERT
  43
  44 /* define this if the LCD needs to be shutdown */
  45 #define HAVE_LCD_SHUTDOWN
  46
  47 /* define this if you have access to the quickscreen */
  48 #define HAVE_QUICKSCREEN
  49 /* define this if you have access to the pitchscreen */
  50 #define HAVE_PITCHSCREEN
  51
  52 /* define this if you would like tagcache to build on this target */
  53 #define HAVE_TAGCACHE
  54
  55 /* LCD dimensions */
  56 #define LCD_WIDTH  160
  57 #define LCD_HEIGHT 128
  58 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  59 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  60
  61 /* Display colours, for screenshots and sim (0xRRGGBB) */
  62 #define LCD_DARKCOLOR       0x000000
  63 #define LCD_BRIGHTCOLOR     0x5a915a
  64 #define LCD_BL_DARKCOLOR    0x000000
  65 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  66
  67 #define HAVE_LCD_CONTRAST
  68
  69 /* LCD contrast */
  70 #define MIN_CONTRAST_SETTING        5
  71 #define MAX_CONTRAST_SETTING        63
  72 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  73
  74 /* define this if you can flip your LCD */
  75 #define HAVE_LCD_FLIP
  76
  77 #define CONFIG_KEYPAD IPOD_4G_PAD
  78
  79 /* Define this if you do software codec */
  80 #define CONFIG_CODEC SWCODEC
  81
  82 /* define this if you have a real-time clock */
  83 #define CONFIG_RTC RTC_PCF50605
  84
  85 /* Define if the device can wake from an RTC alarm */
  86 #define HAVE_RTC_ALARM
  87
  88 /* Define this if you can switch on/off the accessory power supply */
  89 #define HAVE_ACCESSORY_SUPPLY
  90
  91 /* Define this if you have a software controlled poweroff */
  92 #define HAVE_SW_POWEROFF
  93
  94 /* The number of bytes reserved for loadable codecs */
  95 #define CODEC_SIZE 0x100000
  96
  97 /* The number of bytes reserved for loadable plugins */
  98 #define PLUGIN_BUFFER_SIZE 0x80000
  99
 100 /* Define this if you have the WM8975 audio codec */
 101 #define HAVE_WM8975
 102
 103 #define AB_REPEAT_ENABLE 1
 104 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 105
 106 /* define this if you have a disk storage, i.e. something
 107    that needs spinups and can cause skips when shaked */
 108 #define HAVE_DISK_STORAGE
 109
 110 /* Define this for LCD backlight available */
 111 #define HAVE_BACKLIGHT
 112
 113 /* define this if the unit uses a scrollwheel for navigation */
 114 #define HAVE_SCROLLWHEEL
 115 /* define to activate advanced wheel acceleration code */
 116 #define HAVE_WHEEL_ACCELERATION
 117 /* define from which rotation speed [degree/sec] on the acceleration starts */
 118 #define WHEEL_ACCEL_START 270
 119 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 120 #define WHEEL_ACCELERATION 3
 121
 122 /* Define this if you can detect headphones */
 123 #define HAVE_HEADPHONE_DETECTION
 124
 125 #define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
 126 #define BATTERY_CAPACITY_MIN 630  /* min. capacity selectable */
 127 #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
 128 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
 129 #define BATTERY_TYPES_COUNT  1    /* only one type */
 130
 131 /* Hardware controlled charging? */
 132 #define CONFIG_CHARGING CHARGING_MONITOR
 133
 134 /* define this if the unit can be powered or charged via USB */
 135 #define HAVE_USB_POWER
 136
 137 /* define current usage levels */
 138 #define CURRENT_NORMAL     100  /* MP3: ~10.5h out of 1100mAh battery  */
 139 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 140 #if defined(HAVE_RECORDING)
 141 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 142 #endif
 143
 144 #ifndef SIMULATOR
 145
 146 /* Define this if you have a PortalPlayer PP5020 */
 147 #define CONFIG_CPU PP5020
 148
 149 /* Define this if you want to use the PP5020 i2c interface */
 150 #define CONFIG_I2C I2C_PP5020
 151
 152 /* We're able to shut off power to the HDD */
 153 #define HAVE_ATA_POWER_OFF
 154
 155 /* define this if the hardware can be powered off while charging */
 156 //#define HAVE_POWEROFF_WHILE_CHARGING
 157
 158 /* The start address index for ROM builds */
 159 #define ROM_START 0x00000000
 160
 161 /* The size of the flash ROM */
 162 #define FLASH_SIZE 0x100000
 163
 164 /* Define this to the CPU frequency */
 165 #define CPU_FREQ      11289600
 166
 167 #define CONFIG_LCD LCD_IPOD2BPP
 168
 169 /* Offset ( in the firmware file's header ) to the file length */
 170 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 171
 172 /* Offset ( in the firmware file's header ) to the file CRC */
 173 #define FIRMWARE_OFFSET_FILE_CRC 0
 174
 175 /* Offset ( in the firmware file's header ) to the real data */
 176 #define FIRMWARE_OFFSET_FILE_DATA 8
 177
 178 /* USB On-the-go */
 179 #define CONFIG_USBOTG USBOTG_ARC
 180
 181 /* enable these for the experimental usb stack */
 182 #define HAVE_USBSTACK
 183 #define USE_ROCKBOX_USB
 184 #define USB_VENDOR_ID 0x05ac
 185 #define USB_PRODUCT_ID 0x1203
 186
 187 /* Virtual LED (icon) */
 188 #define CONFIG_LED LED_VIRTUAL
 189
 190 /* Define this if you have adjustable CPU frequency */
 191 #define HAVE_ADJUSTABLE_CPU_FREQ
 192
 193 /* Define this if you can read an absolute wheel position */
 194 #define HAVE_WHEEL_POSITION
 195
 196 #define BOOTFILE_EXT "ipod"
 197 #define BOOTFILE "rockbox." BOOTFILE_EXT
 198 #define BOOTDIR "/.rockbox"
 199
 200 #define ICODE_ATTR_TREMOR_NOT_MDCT
 201
 202 #define IPOD_ACCESSORY_PROTOCOL
 203 #define HAVE_SERIAL
 204
 205 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 206
 207 #endif