2 * This config file is for the Tatung Elio TPJ-1022
5 #define TARGET_TREE /* this target is using the target tree system */
7 #define MODEL_NAME "Tatung Elio TPJ-1022"
9 /* For Rolo and boot loader */
10 #define MODEL_NUMBER 15
12 /* define this if you use an ATA controller */
13 #define CONFIG_STORAGE STORAGE_ATA
15 /* define this if you have recording possibility */
16 /*#define HAVE_RECORDING*/ /* TODO: add support for this */
18 /* define the bitmask of hardware sample rates */
19 #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
20 SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
22 /* define the bitmask of recording sample rates
23 #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
24 SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
26 /* define this if you have a bitmap LCD display */
27 #define HAVE_LCD_BITMAP
29 /* define this if you have a colour LCD */
30 #define HAVE_LCD_COLOR
32 /* define this if you have access to the quickscreen */
33 #define HAVE_QUICKSCREEN
35 /* define this if you have access to the pitchscreen */
36 #define HAVE_PITCHSCREEN
40 #define LCD_HEIGHT 176
41 #define LCD_DEPTH 16 /* 65536 colours */
42 #define LCD_PIXELFORMAT RGB565
44 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
46 #define CONFIG_KEYPAD TATUNG_TPJ1022_PAD
48 /* Define this if you do software codec */
49 #define CONFIG_CODEC SWCODEC
51 /* define this if you have a real-time clock */
53 //#define CONFIG_RTC RTC_E8564
56 /* Define this if you have a software controlled poweroff */
57 #define HAVE_SW_POWEROFF
59 /* The number of bytes reserved for loadable codecs */
60 #define CODEC_SIZE 0x100000
62 /* The number of bytes reserved for loadable plugins */
63 #define PLUGIN_BUFFER_SIZE 0x80000
65 /* Define this if you have the WM8731 audio codec */
68 #define AB_REPEAT_ENABLE 1
70 /* define this if you have a disk storage, i.e. something
71 that needs spinups and can cause skips when shaked */
72 #define HAVE_DISK_STORAGE
74 /* Define this for LCD backlight available */
75 #define HAVE_BACKLIGHT
77 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
78 TODO: check this, probably different
79 for different models too */
80 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
81 #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
82 #define BATTERY_CAPACITY_INC 10 /* capacity increment */
83 #define BATTERY_TYPES_COUNT 1 /* only one type */
85 /* Hardware controlled charging? FIXME */
86 #define CONFIG_CHARGING CHARGING_SIMPLE
88 /* define this if the unit can be powered or charged via USB */
89 /*#define HAVE_USB_POWER*/
91 /* Define this if you have a PortalPlayer PP5020 */
92 #define CONFIG_CPU PP5020
94 /* Define this if you want to use the PP5020 i2c interface */
95 #define CONFIG_I2C I2C_PP5020
97 /* define this if the hardware can be powered off while charging */
98 /* TODO: should this be set for the H10? */
99 //#define HAVE_POWEROFF_WHILE_CHARGING
101 /* The start address index for ROM builds */
102 #define ROM_START 0x00000000
104 /* Define this to the CPU frequency */
105 /* TODO: this is probably wrong */
106 #define CPU_FREQ 11289600
109 #define CONFIG_LCD LCD_TPJ1022
111 #define DEFAULT_CONTRAST_SETTING 19
113 /* Offset ( in the firmware file's header ) to the file length */
114 #define FIRMWARE_OFFSET_FILE_LENGTH 0
116 /* Offset ( in the firmware file's header ) to the file CRC */
117 #define FIRMWARE_OFFSET_FILE_CRC 0
119 /* Offset ( in the firmware file's header ) to the real data */
120 #define FIRMWARE_OFFSET_FILE_DATA 8
123 #define CONFIG_USBOTG USBOTG_ARC
125 /* define this if the unit can be powered or charged via USB */
126 #define HAVE_USB_POWER
128 /* enable these for the experimental usb stack ROOLKU */
129 #define HAVE_USBSTACK
130 #define USB_VENDOR_ID 0x07B4
131 #define USB_PRODUCT_ID 0x0280
133 /* Define this if you have adjustable CPU frequency */
134 #define HAVE_ADJUSTABLE_CPU_FREQ
136 #define BOOTFILE_EXT "elio"
137 #define BOOTFILE "rockbox." BOOTFILE_EXT
138 #define BOOTDIR "/.rockbox"
141 /* DMA is used only for reading on PP502x because although reads are ~8x faster
142 * writes appear to be ~25% slower.