2 * This config file is for the Olympus m:robe MR-100
7 /* For Rolo and boot loader */
8 #define MODEL_NUMBER 23
9 #define MODEL_NAME "Olympus m:robe MR-100"
11 /* define this if you use an ATA controller */
12 #define CONFIG_STORAGE STORAGE_ATA
14 /* define this if you have a bitmap LCD display */
15 #define HAVE_LCD_BITMAP
17 /* define this if you have access to the quickscreen */
18 #define HAVE_QUICKSCREEN
20 /* define this if you have access to the pitchscreen */
21 #define HAVE_PITCHSCREEN
23 /* define this if you would like tagcache to build on this target */
28 #define LCD_HEIGHT 128
31 #define LCD_PIXELFORMAT VERTICAL_PACKING
32 #define HAVE_NEGATIVE_LCD /* bright on dark */
34 /* Display colours, for screenshots and sim (0xRRGGBB) */
35 #define LCD_DARKCOLOR 0x000000
36 #define LCD_BRIGHTCOLOR 0x323232
37 #define LCD_BL_DARKCOLOR 0x5e0202
38 #define LCD_BL_BRIGHTCOLOR 0xf10603
40 /* define this if you can flip your LCD */
43 /* define this if you can invert the colours on your LCD */
44 #define HAVE_LCD_INVERT
46 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
49 /* Define this if you have an remote lcd */
50 #define HAVE_REMOTE_LCD
52 #define LCD_REMOTE_WIDTH 79
53 #define LCD_REMOTE_HEIGHT 16
54 #define LCD_REMOTE_DEPTH 1
55 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
57 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
58 #define LCD_REMOTE_DARKCOLOR 0x000000
59 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
60 #define LCD_REMOTE_BL_DARKCOLOR 0x000000
61 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
62 #endif /* BOOTLOADER */
64 #define CONFIG_KEYPAD MROBE100_PAD
65 #define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
67 /* Define this to enable morse code input */
68 #define HAVE_MORSE_INPUT
70 /* Define this if you do software codec */
71 #define CONFIG_CODEC SWCODEC
73 /* define this if you have a real-time clock */
75 #define CONFIG_RTC RTC_MR100
78 /* Define this if you have a software controlled poweroff */
79 #define HAVE_SW_POWEROFF
81 /* The number of bytes reserved for loadable codecs */
82 #define CODEC_SIZE 0x100000
84 /* The number of bytes reserved for loadable plugins */
85 #define PLUGIN_BUFFER_SIZE 0x80000
87 /* Wolfsom audio codec */
89 #define CODEC_SRCTRL_44100HZ (0x40|(0x11 << 1)|1)
91 #define AB_REPEAT_ENABLE 1
93 /* define this if you have a disk storage, i.e. something
94 that needs spinups and can cause skips when shaked */
95 #define HAVE_DISK_STORAGE
97 /* Define this for LCD backlight available */
98 #define HAVE_BACKLIGHT
100 /* We can fade the backlight by using PWM */
101 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
103 /* Main LCD backlight brightness range and defaults */
104 #define MIN_BRIGHTNESS_SETTING 1
105 #define MAX_BRIGHTNESS_SETTING 12
106 #define DEFAULT_BRIGHTNESS_SETTING 6
108 /* define this if you have a light associated with the buttons */
109 #define HAVE_BUTTON_LIGHT
111 #define HAVE_BUTTONLIGHT_BRIGHTNESS
113 /* Remote LCD contrast range and defaults */
114 #define MIN_REMOTE_CONTRAST_SETTING 0
115 #define MAX_REMOTE_CONTRAST_SETTING 15
116 #define DEFAULT_REMOTE_CONTRAST_SETTING 8
118 /* Define this if your LCD can be enabled/disabled */
119 /* TODO: #define HAVE_LCD_ENABLE */
121 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
122 * should be defined as well.
123 * We can currently put the lcd to sleep but it won't wake up properly */
124 /*TODO: #define HAVE_LCD_SLEEP*/
125 /*TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
127 #define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
129 /* Define this if you have a PortalPlayer PP5020 */
130 #define CONFIG_CPU PP5020
132 /* Define this if you want to use the PP5020 i2c interface */
133 #define CONFIG_I2C I2C_PP5020
135 /* Type of mobile power */
136 #define CONFIG_BATTERY BATT_LIION750
137 #define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
138 #define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
139 #define BATTERY_CAPACITY_INC 0 /* capacity increment */
140 #define BATTERY_TYPES_COUNT 1 /* only one type */
142 /* Hardware controlled charging */
143 #define CONFIG_CHARGING CHARGING_SIMPLE
145 /* define this if the hardware can be powered off while charging */
146 #define HAVE_POWEROFF_WHILE_CHARGING
148 /* The start address index for ROM builds */
149 #define ROM_START 0x00000000
151 /* The size of the flash ROM */
152 #define FLASH_SIZE 0x100000
154 /* Define this to the CPU frequency */
155 #define CPU_FREQ 75000000
158 #define CONFIG_LCD LCD_MROBE100
160 /* Define this if your LCD can set contrast */
161 #define HAVE_LCD_CONTRAST
163 #define MIN_CONTRAST_SETTING 0
164 #define MAX_CONTRAST_SETTING 40
165 #define DEFAULT_CONTRAST_SETTING 20
168 /* We're able to shut off power to the HDD */
169 #define HAVE_ATA_POWER_OFF
172 #define CONFIG_USBOTG USBOTG_ARC
174 /* define this if the unit can be powered or charged via USB */
175 #define HAVE_USB_POWER
177 /* enable these for the experimental usb stack */
178 #define HAVE_USBSTACK
179 #define USE_ROCKBOX_USB
180 #define USB_VENDOR_ID 0x07B4
181 #define USB_PRODUCT_ID 0x0280
182 #define HAVE_USB_HID_MOUSE
184 /* Define this if you have adjustable CPU frequency */
185 #define HAVE_ADJUSTABLE_CPU_FREQ
187 /* Define this if you can detect headphones */
188 #define HAVE_HEADPHONE_DETECTION
191 #define BOOTFILE_EXT "mi4"
192 #define BOOTFILE "rockbox." BOOTFILE_EXT
193 #define BOOTDIR "/.rockbox"
195 /* Offset ( in the firmware file's header ) to the file CRC and data.
196 Not used for the mrobe 100, since it boots an mi4 file, but needed
197 for compatibility. */
198 #define FIRMWARE_OFFSET_FILE_CRC 0x0
199 #define FIRMWARE_OFFSET_FILE_DATA 0x0
201 #define ICODE_ATTR_TREMOR_NOT_MDCT
204 /* DMA is used only for reading on PP502x because although reads are ~8x faster
205 * writes appear to be ~25% slower.