firmware/export/config-c200v2.h

   1 /*
   2  * This config file is for the Sandisk Sansa c200v2
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 44
   8 #define MODEL_NAME   "Sandisk Sansa c200v2 series"
   9 #define FIRMWARE_OFFSET_FILE_DATA 8
  10 #define FIRMWARE_OFFSET_FILE_CRC 0
  11
  12 #if 0
  13
  14 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  20 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  21 #define REC_SAMPR_DEFAULT   SAMPR_22
  22
  23 #endif
  24
  25 /* Define bitmask of input sources - recordable bitmask can be defined
  26    explicitly if different */
  27 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this to enable bitmap scaling */
  39 #define HAVE_BMP_SCALING
  40
  41 /* define this to enable JPEG decoding */
  42 #define HAVE_JPEG
  43
  44 /* define this if you have a light associated with the buttons */
  45 #define HAVE_BUTTON_LIGHT
  46
  47 /* define this if you have access to the quickscreen */
  48 #define HAVE_QUICKSCREEN
  49
  50 /* define this if you have access to the pitchscreen */
  51 #define HAVE_PITCHSCREEN
  52
  53 /* define this if you would like tagcache to build on this target */
  54 #define HAVE_TAGCACHE
  55
  56 /* LCD dimensions */
  57 #define LCD_WIDTH  132
  58 #define LCD_HEIGHT 80
  59 #define LCD_DEPTH  16   /* 65536 colours */
  60 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  61
  62 /* define this if you have LCD enable function */
  63 #define HAVE_LCD_ENABLE
  64
  65 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  66    should be defined as well. */
  67 /* TODO: #define HAVE_LCD_SLEEP */
  68 /* TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
  69
  70 /* define this if you can flip your LCD */
  71 #define HAVE_LCD_FLIP
  72
  73 /* define this if you can invert the colours on your LCD */
  74 /* TODO: #define HAVE_LCD_INVERT */
  75
  76 /* Define this if your LCD can set contrast */
  77 #define HAVE_LCD_CONTRAST
  78
  79 #define MIN_CONTRAST_SETTING        0
  80 #define MAX_CONTRAST_SETTING        255
  81 #define DEFAULT_CONTRAST_SETTING    85
  82
  83 #if 0   /* not enough room for a 16 bits framebuffer */
  84 #define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
  85 #endif
  86
  87 #define CONFIG_KEYPAD SANSA_C200_PAD
  88
  89 /* define this if the target has volume keys which can be used in the lists */
  90 #define HAVE_VOLUME_IN_LIST
  91
  92 /* Define this if you do software codec */
  93 #define CONFIG_CODEC SWCODEC
  94
  95 /* There is no hardware tone control */
  96 #define HAVE_SW_TONE_CONTROLS
  97
  98 /* The AS3525 has a built-in AS3514 (or a newer version) */
  99 #define HAVE_AS3514
 100
 101 /* define this if you have a real-time clock */
 102 #ifndef BOOTLOADER
 103 #define CONFIG_RTC RTC_AS3514
 104 #endif
 105
 106 /* Define this if you have a software controlled poweroff */
 107 #define HAVE_SW_POWEROFF
 108
 109 /* Some Sansa E200s seem to be FAT16 formatted */
 110 #define HAVE_FAT16SUPPORT
 111
 112 /* The number of bytes reserved for loadable codecs */
 113 #define CODEC_SIZE 0x48000
 114
 115 /* The number of bytes reserved for loadable plugins */
 116 #define PLUGIN_BUFFER_SIZE 0x80000
 117
 118 #define AB_REPEAT_ENABLE 1
 119
 120 /* FM Tuner - suspected to be the SI4702 */
 121 #define CONFIG_TUNER SI4700
 122 /* #define HAVE_TUNER_PWR_CTRL */
 123
 124 /* Define this for LCD backlight available */
 125 #define HAVE_BACKLIGHT
 126 #define HAVE_BACKLIGHT_BRIGHTNESS
 127
 128 /* define this if you have a flash memory storage */
 129 #define HAVE_FLASH_STORAGE
 130
 131 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 132 #define CONFIG_STORAGE STORAGE_SD
 133
 134 #define BATTERY_CAPACITY_DEFAULT 530    /* default battery capacity */
 135 #define BATTERY_CAPACITY_MIN 530        /* min. capacity selectable */
 136 #define BATTERY_CAPACITY_MAX 530        /* max. capacity selectable */
 137 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 138 #define BATTERY_TYPES_COUNT  1          /* only one type */
 139
 140 /* Hardware controlled charging? FIXME */
 141 #define CONFIG_CHARGING CHARGING_SIMPLE
 142
 143 /* define this if the unit can be powered or charged via USB */
 144 #define HAVE_USB_POWER
 145
 146 /** Non-simulator section **/
 147 #ifndef SIMULATOR
 148
 149 /* Define this if you have a PortalPlayer PP5024 */
 150 #define CONFIG_CPU AS3525
 151
 152 /* Define how much SD sectors are reserved for OF */
 153 #define AMS_OF_SIZE 0x5000
 154
 155 /* Define this if you want to use the PP5024 i2c interface */
 156 #define CONFIG_I2C I2C_AS3525
 157
 158 /* define this if the hardware can be powered off while charging */
 159 /* Sansa can't be powered off while charging */
 160 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 161
 162 /* The start address index for ROM builds */
 163 #define ROM_START 0x00000000
 164
 165 /* Define this to the CPU frequency */
 166 #define CPU_FREQ      250000000
 167
 168 /* Type of LCD : Samsung S6B33B2 */
 169 #define CONFIG_LCD LCD_C200
 170
 171 #ifndef BOOTLOADER
 172 #define HAVE_MULTIVOLUME
 173 #define HAVE_HOTSWAP
 174
 175 #define USB_HANDLED_BY_OF
 176
 177 #define CONFIG_USBOTG USBOTG_AS3525
 178
 179 /* enable these for the experimental usb stack */
 180 #define HAVE_USBSTACK
 181 #define USB_VENDOR_ID 0x0781
 182 #define USB_PRODUCT_ID 0x7452
 183
 184 #endif /* BOOTLOADER */
 185
 186 /* Virtual LED (icon) */
 187 #define CONFIG_LED LED_VIRTUAL
 188
 189 /* Define this if you have adjustable CPU frequency */
 190 #define HAVE_ADJUSTABLE_CPU_FREQ
 191
 192 #define BOOTFILE_EXT    "sansa"
 193 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 194 #define BOOTDIR "/.rockbox"
 195
 196 #define ICODE_ATTR_TREMOR_NOT_MDCT
 197
 198 #define INCLUDE_TIMEOUT_API
 199
 200 #endif /* SIMULATOR */
 201
 202 /** Port-specific settings **/
 203
 204 /* Main LCD backlight brightness range and defaults */
 205 #define MIN_BRIGHTNESS_SETTING      1
 206 #define MAX_BRIGHTNESS_SETTING     12
 207 #define DEFAULT_BRIGHTNESS_SETTING  6
 208
 209 /* Default recording levels */
 210 #define DEFAULT_REC_MIC_GAIN    23
 211 #define DEFAULT_REC_LEFT_GAIN   23
 212 #define DEFAULT_REC_RIGHT_GAIN  23