firmware/export/config-hdd1630.h

   1 /*
   2  * This config file is for the Philips GoGear HDD16x0/HDD63x0
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 31
   9 #define MODEL_NAME   "Philips GoGear HDD16x0"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have recording possibility */
  15 #define HAVE_RECORDING
  16
  17 /* Define bitmask of input sources - recordable bitmask can be defined
  18    explicitly if different */
  19 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  20
  21 /* define the bitmask of hardware sample rates */
  22 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  23                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  24
  25 /* define the bitmask of recording sample rates */
  26 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  27                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this if you have access to the quickscreen */
  39 #define HAVE_QUICKSCREEN
  40
  41 /* define this if you have access to the pitchscreen */
  42 #define HAVE_PITCHSCREEN
  43
  44 /* define this if you would like tagcache to build on this target */
  45 #define HAVE_TAGCACHE
  46
  47 /* LCD dimensions */
  48 #define LCD_WIDTH  128
  49 #define LCD_HEIGHT 128
  50 #define LCD_DEPTH  16   /* 65536 colours */
  51 #define LCD_PIXELFORMAT RGB565  /* rgb565 byte-swapped */
  52
  53 #ifndef BOOTLOADER
  54 /* Define this if your LCD can be enabled/disabled */
  55 /* #define HAVE_LCD_ENABLE */
  56
  57 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  58  * should be defined as well.
  59  * We can currently put the lcd to sleep but it won't wake up properly */
  60 /* #define HAVE_LCD_SLEEP */
  61 /* #define HAVE_LCD_SLEEP_SETTING */
  62 #endif
  63
  64 /* define this if you can flip your LCD */
  65 #define HAVE_LCD_FLIP
  66
  67 /* define this if you can invert the colours on your LCD */
  68 #define HAVE_LCD_INVERT
  69
  70 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  71
  72 #define CONFIG_KEYPAD PHILIPS_HDD1630_PAD
  73
  74 /* define this if the target has volume keys which can be used in the lists */
  75 #define HAVE_VOLUME_IN_LIST
  76
  77 /* Define this if you do software codec */
  78 #define CONFIG_CODEC SWCODEC
  79
  80 /* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC,
  81    but it's register compatible with the E8564. */
  82 #ifndef BOOTLOADER
  83 #define CONFIG_RTC RTC_E8564
  84 #define HAVE_RTC_ALARM
  85 #endif
  86
  87 /* Define this if you have a software controlled poweroff */
  88 #define HAVE_SW_POWEROFF
  89
  90 /* The number of bytes reserved for loadable codecs */
  91 #define CODEC_SIZE 0x100000
  92
  93 /* The number of bytes reserved for loadable plugins */
  94 #define PLUGIN_BUFFER_SIZE 0x80000
  95
  96 /* Define this if you have the WM8731 audio codec */
  97 #define HAVE_WM8731
  98
  99 /* WM8731 has no tone controls, so we use the software ones */
 100 #define HAVE_SW_TONE_CONTROLS
 101
 102 /* TODO: #define AB_REPEAT_ENABLE 1 */
 103
 104 /* FM Tuner */
 105 #define CONFIG_TUNER      TEA5767
 106 #define CONFIG_TUNER_XTAL 32768
 107
 108 /* define this if you have a disk storage, i.e. something
 109    that needs spinups and can cause skips when shaked */
 110 #define HAVE_DISK_STORAGE
 111
 112 /* Define this for LCD backlight available */
 113 #define HAVE_BACKLIGHT
 114 #define HAVE_BACKLIGHT_BRIGHTNESS
 115 /* #define CONFIG_BACKLIGHT_FADING     BACKLIGHT_FADING_SW_SETTING */
 116
 117 /* Main LCD backlight brightness range and defaults */
 118 #define MIN_BRIGHTNESS_SETTING      1
 119 #define MAX_BRIGHTNESS_SETTING     16
 120 #define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */
 121
 122 /* define this if you have a light associated with the buttons */
 123 #define HAVE_BUTTON_LIGHT
 124 #define HAVE_BUTTONLIGHT_BRIGHTNESS
 125
 126 #define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
 127 #define BATTERY_CAPACITY_MIN     630 /* min. capacity selectable */
 128 #define BATTERY_CAPACITY_MAX     630 /* max. capacity selectable */
 129 #define BATTERY_CAPACITY_INC       0 /* capacity increment */
 130 #define BATTERY_TYPES_COUNT        1 /* only one type */
 131
 132 /* Hardware controlled charging */
 133 #define CONFIG_CHARGING CHARGING_SIMPLE
 134
 135 /* define this if the unit can be powered or charged via USB */
 136 #define HAVE_USB_POWER
 137
 138 #ifndef SIMULATOR
 139
 140 /* Define this if you have a PortalPlayer PP5020 */
 141 #define CONFIG_CPU PP5022
 142
 143 /* Define this if you want to use the PP5020 i2c interface */
 144 #define CONFIG_I2C I2C_PP5020
 145
 146 /* define this if the hardware can be powered off while charging */
 147 #define HAVE_POWEROFF_WHILE_CHARGING
 148
 149 /* The start address index for ROM builds */
 150 #define ROM_START 0x00000000
 151
 152 /* The size of the flash ROM */
 153 #define FLASH_SIZE 0x100000
 154
 155 /* Define this to the CPU frequency */
 156 #define CPU_FREQ      75000000
 157
 158 /* Type of LCD */
 159 #define CONFIG_LCD LCD_HDD1630
 160
 161 /* Define this if your LCD can set contrast */
 162 #define HAVE_LCD_CONTRAST
 163
 164 #define MIN_CONTRAST_SETTING        0
 165 #define MAX_CONTRAST_SETTING        127
 166 #define DEFAULT_CONTRAST_SETTING    63 /* Match boot contrast */
 167
 168 /* We're able to shut off power to the HDD */
 169 #define HAVE_ATA_POWER_OFF
 170
 171 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 172    only used when loading the old format rockbox.e200 file */
 173 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 174 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 175
 176 /* USB On-the-go */
 177 #define CONFIG_USBOTG USBOTG_ARC
 178
 179 /* enable these for the experimental usb stack */
 180 #define HAVE_USBSTACK
 181 #define USE_ROCKBOX_USB
 182 #define USB_VENDOR_ID 0x0471
 183 #define USB_PRODUCT_ID 0x014C
 184
 185 /* Virtual LED (icon) */
 186 #define CONFIG_LED LED_VIRTUAL
 187
 188 /* Define this if you have adjustable CPU frequency */
 189 #define HAVE_ADJUSTABLE_CPU_FREQ
 190
 191 #define MI4_FORMAT
 192 #define BOOTFILE_EXT    "mi4"
 193 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 194 #define BOOTDIR "/.rockbox"
 195
 196 #define ICODE_ATTR_TREMOR_NOT_MDCT
 197
 198 #endif