firmware/export/config-cowond2.h

   1 /*
   2  * This config file is for the Cowon D2
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 24
   8
   9 #define MODEL_NAME   "Cowon D2"
  10
  11 #if 0
  12 #define HAVE_USBSTACK
  13 #define USE_ROCKBOX_USB
  14 #define USB_VENDOR_ID 0x0e21
  15 #define USB_PRODUCT_ID 0x0800
  16 #endif
  17
  18
  19 /* Produce a dual-boot bootloader.bin for mktccboot */
  20 #define TCCBOOT
  21
  22 /* define this if you have recording possibility */
  23 //#define HAVE_RECORDING
  24
  25 /* Define bitmask of input sources - recordable bitmask can be defined
  26    explicitly if different */
  27 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you can flip your LCD */
  36 /* #define HAVE_LCD_FLIP */
  37
  38 /* define this if you can invert the colours on your LCD */
  39 /* #define HAVE_LCD_INVERT */
  40
  41 /* define this if you want album art for this target */
  42 #define HAVE_ALBUMART
  43
  44 /* define this to enable bitmap scaling */
  45 #define HAVE_BMP_SCALING
  46
  47 /* define this to enable JPEG decoding */
  48 #define HAVE_JPEG
  49
  50 /* define this if you have access to the quickscreen */
  51 #define HAVE_QUICKSCREEN
  52 /* define this if you have access to the pitchscreen */
  53 #define HAVE_PITCHSCREEN
  54
  55 /* define this if you would like tagcache to build on this target */
  56 #define HAVE_TAGCACHE
  57
  58 /* FM Tuner */
  59 #define CONFIG_TUNER LV24020LP
  60 #define HAVE_TUNER_PWR_CTRL
  61
  62 /* define this if you have a flash memory storage */
  63 #define HAVE_FLASH_STORAGE
  64
  65 #ifndef SIMULATOR
  66 #define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
  67 #define HAVE_MULTIDRIVE
  68 #define HAVE_HOTSWAP
  69 #define NUM_DRIVES 2
  70 #else
  71 #define CONFIG_STORAGE STORAGE_NAND
  72 #endif
  73
  74 #define CONFIG_NAND NAND_TCC
  75
  76 /* Some (2Gb?) D2s seem to be FAT16 formatted */
  77 #define HAVE_FAT16SUPPORT
  78
  79 /* LCD dimensions */
  80 #define LCD_WIDTH  320
  81 #define LCD_HEIGHT 240
  82 #define LCD_DEPTH  16
  83 #define LCD_PIXELFORMAT 565
  84
  85 /* define this if you have LCD enable function */
  86 #define HAVE_LCD_ENABLE
  87
  88 /* define this to indicate your device's keypad */
  89 #define CONFIG_KEYPAD COWOND2_PAD
  90 #define HAVE_TOUCHSCREEN
  91 #define HAVE_BUTTON_DATA
  92
  93 /* The D2 has either a PCF50606 or PCF50635, RTC_D2 handles both */
  94 #define CONFIG_RTC RTC_D2
  95
  96 /* define this if you have RTC RAM available for settings */
  97 //#define HAVE_RTC_RAM
  98
  99 /* Define this if you have a software controlled poweroff */
 100 #define HAVE_SW_POWEROFF
 101
 102 /* Reduce Tremor's ICODE usage */
 103 #define ICODE_ATTR_TREMOR_NOT_MDCT
 104
 105 /* The number of bytes reserved for loadable codecs */
 106 #define CODEC_SIZE 0x100000
 107
 108 /* The number of bytes reserved for loadable plugins */
 109 #define PLUGIN_BUFFER_SIZE 0x80000
 110
 111 #define AB_REPEAT_ENABLE 1
 112
 113 /* Define this if you do software codec */
 114 #define CONFIG_CODEC SWCODEC
 115
 116 /* The D2 uses a WM8985 codec */
 117 #define HAVE_WM8985
 118
 119 /* Use WM8985 EQ1 & EQ5 as hardware tone controls */
 120 /* #define HAVE_SW_TONE_CONTROLS */
 121
 122 /* Define this for LCD backlight available */
 123 #define HAVE_BACKLIGHT
 124 /* Enable LCD brightness control */
 125 #define HAVE_BACKLIGHT_BRIGHTNESS
 126 /* Which backlight fading type? */
 127 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
 128
 129 /* Main LCD backlight brightness range and defaults */
 130 #define MIN_BRIGHTNESS_SETTING      1
 131 #define MAX_BRIGHTNESS_SETTING      14
 132 #define DEFAULT_BRIGHTNESS_SETTING  8
 133
 134 #define CONFIG_I2C I2C_TCC780X
 135
 136 #define BATTERY_CAPACITY_DEFAULT 1600 /* default battery capacity */
 137 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
 138 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 139 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 140 #define BATTERY_TYPES_COUNT  1    /* only one type */
 141
 142 /* Hardware controlled charging */
 143 #define CONFIG_CHARGING CHARGING_SIMPLE
 144
 145 /* Define this if the unit can be powered or charged via USB */
 146 #define HAVE_USB_POWER
 147
 148 /* Define current usage levels. */
 149 #define CURRENT_NORMAL     88 /* 18 hours from a 1600 mAh battery */
 150 #define CURRENT_BACKLIGHT  30 /* TBD */
 151 #define CURRENT_RECORD     0  /* no recording yet */
 152
 153 #ifndef SIMULATOR
 154 /* Define this if you have a TCC7801 */
 155 #define CONFIG_CPU TCC7801
 156
 157 /* Define this to the CPU frequency */
 158 #define CPU_FREQ 48000000
 159
 160 /* Define this if you have adjustable CPU frequency */
 161 #define HAVE_ADJUSTABLE_CPU_FREQ
 162
 163 #define INCLUDE_TIMEOUT_API
 164
 165 /* Offset ( in the firmware file's header ) to the file CRC */
 166 #define FIRMWARE_OFFSET_FILE_CRC 0
 167
 168 /* Offset ( in the firmware file's header ) to the real data */
 169 #define FIRMWARE_OFFSET_FILE_DATA 8
 170
 171 #define CONFIG_LCD LCD_COWOND2
 172
 173 #define BOOTFILE_EXT "d2"
 174 #define BOOTFILE "rockbox." BOOTFILE_EXT
 175 #define BOOTDIR "/.rockbox"
 176
 177
 178 #endif /* SIMULATOR */