bootloader/iriver_h1x0.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2005 by Linus Nielsen Feltzing
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21 #include "config.h"
  22
  23 #include <stdlib.h>
  24 #include <stdio.h>
  25 #include "inttypes.h"
  26 #include "string.h"
  27 #include "cpu.h"
  28 #include "system.h"
  29 #include "lcd.h"
  30 #include "lcd-remote.h"
  31 #include "scroll_engine.h"
  32 #include "kernel.h"
  33 #include "thread.h"
  34 #include "storage.h"
  35 #include "usb.h"
  36 #include "disk.h"
  37 #include "font.h"
  38 #include "adc.h"
  39 #include "backlight.h"
  40 #include "backlight-target.h"
  41 #include "button.h"
  42 #include "panic.h"
  43 #include "power.h"
  44 #include "powermgmt.h"
  45 #include "file.h"
  46 #include "eeprom_settings.h"
  47 #include "rbunicode.h"
  48 #include "common.h"
  49 #include "version.h"
  50
  51 #include <stdarg.h>
  52
  53 /* Maximum allowed firmware image size. 10MB is more than enough */
  54 #define MAX_LOADSIZE (10*1024*1024)
  55
  56 #define DRAM_START 0x31000000
  57
  58 #ifdef HAVE_EEPROM_SETTINGS
  59 static bool recovery_mode = false;
  60 #endif
  61
  62 /* Reset the cookie for the crt0 crash check */
  63 inline void __reset_cookie(void)
  64 {
  65     asm(" move.l #0,%d0");
  66     asm(" move.l %d0,0x10017ffc");
  67 }
  68
  69 void start_iriver_fw(void)
  70 {
  71     asm(" move.w #0x2700,%sr");
  72     __reset_cookie();
  73     asm(" movec.l %d0,%vbr");
  74     asm(" move.l 0,%sp");
  75     asm(" lea.l 8,%a0");
  76     asm(" jmp (%a0)");
  77 }
  78
  79 void start_firmware(void)
  80 {
  81     asm(" move.w #0x2700,%sr");
  82     __reset_cookie();
  83     asm(" move.l %0,%%d0" :: "i"(DRAM_START));
  84     asm(" movec.l %d0,%vbr");
  85     asm(" move.l %0,%%sp" :: "m"(*(int *)DRAM_START));
  86     asm(" move.l %0,%%a0" :: "m"(*(int *)(DRAM_START+4)));
  87     asm(" jmp (%a0)");
  88 }
  89
  90 #ifdef IRIVER_H100_SERIES
  91 void start_flashed_romimage(void)
  92 {
  93     uint8_t *src = (uint8_t *)FLASH_ROMIMAGE_ENTRY;
  94     int *reset_vector;
  95
  96     if (!detect_flashed_romimage())
  97         return ;
  98
  99     reset_vector = (int *)(&src[sizeof(struct flash_header)+4]);
 100
 101     asm(" move.w #0x2700,%sr");
 102     __reset_cookie();
 103
 104     asm(" move.l %0,%%d0" :: "i"(DRAM_START));
 105     asm(" movec.l %d0,%vbr");
 106     asm(" move.l %0,%%sp" :: "m"(reset_vector[0]));
 107     asm(" move.l %0,%%a0" :: "m"(reset_vector[1]));
 108     asm(" jmp (%a0)");
 109
 110     /* Failure */
 111     power_off();
 112 }
 113
 114 void start_flashed_ramimage(void)
 115 {
 116     struct flash_header hdr;
 117     unsigned char *buf = (unsigned char *)DRAM_START;
 118     uint8_t *src = (uint8_t *)FLASH_RAMIMAGE_ENTRY;
 119
 120     if (!detect_flashed_ramimage())
 121          return;
 122
 123     /* Load firmware from flash */
 124     cpu_boost(true);
 125     memcpy(&hdr, src, sizeof(struct flash_header));
 126     src += sizeof(struct flash_header);
 127     memcpy(buf, src, hdr.length);
 128     cpu_boost(false);
 129
 130     start_firmware();
 131
 132     /* Failure */
 133     power_off();
 134 }
 135 #endif /* IRIVER_H100_SERIES */
 136
 137 void shutdown(void)
 138 {
 139     printf("Shutting down...");
 140 #ifdef HAVE_EEPROM_SETTINGS
 141     /* Reset the rockbox crash check. */
 142     firmware_settings.bl_version = 0;
 143     eeprom_settings_store();
 144 #endif
 145
 146     /* We need to gracefully spin down the disk to prevent clicks. */
 147     if (ide_powered())
 148     {
 149         /* Make sure ATA has been initialized. */
 150         storage_init();
 151
 152         /* And put the disk into sleep immediately. */
 153         storage_sleepnow();
 154     }
 155
 156     sleep(HZ*2);
 157
 158     /* Backlight OFF */
 159     _backlight_off();
 160 #ifdef HAVE_REMOTE_LCD
 161     _remote_backlight_off();
 162 #endif
 163
 164     __reset_cookie();
 165     power_off();
 166 }
 167
 168 /* Print the battery voltage (and a warning message). */
 169 void check_battery(void)
 170 {
 171     int battery_voltage, batt_int, batt_frac;
 172
 173     battery_voltage = battery_adc_voltage();
 174     batt_int = battery_voltage / 1000;
 175     batt_frac = (battery_voltage % 1000) / 10;
 176
 177     printf("Batt: %d.%02dV", batt_int, batt_frac);
 178
 179     if (battery_voltage <= 310)
 180     {
 181         printf("WARNING! BATTERY LOW!!");
 182         sleep(HZ*2);
 183     }
 184 }
 185
 186 #ifdef HAVE_EEPROM_SETTINGS
 187 void initialize_eeprom(void)
 188 {
 189     if (detect_original_firmware())
 190         return ;
 191
 192     if (!eeprom_settings_init())
 193     {
 194         recovery_mode = true;
 195         return ;
 196     }
 197
 198     /* If bootloader version has not been reset, disk might
 199      * not be intact. */
 200     if (firmware_settings.bl_version || !firmware_settings.disk_clean)
 201     {
 202         firmware_settings.disk_clean = false;
 203         recovery_mode = true;
 204     }
 205
 206     firmware_settings.bl_version = EEPROM_SETTINGS_BL_MINVER;
 207     eeprom_settings_store();
 208 }
 209
 210 void try_flashboot(void)
 211 {
 212     if (!firmware_settings.initialized)
 213         return ;
 214
 215    switch (firmware_settings.bootmethod)
 216     {
 217         case BOOT_DISK:
 218             return;
 219
 220         case BOOT_ROM:
 221             start_flashed_romimage();
 222             recovery_mode = true;
 223             break;
 224
 225         case BOOT_RAM:
 226             start_flashed_ramimage();
 227             recovery_mode = true;
 228             break;
 229
 230         default:
 231             recovery_mode = true;
 232             return;
 233     }
 234 }
 235
 236 static const char *options[] = {
 237     "Boot from disk",
 238     "Boot RAM image",
 239     "Boot ROM image",
 240     "Shutdown"
 241 };
 242
 243 #define FAILSAFE_OPTIONS 4
 244 #define TIMEOUT (15*HZ)
 245 void failsafe_menu(void)
 246 {
 247     long start_tick = current_tick;
 248     int option = 3;
 249     int button;
 250     int defopt = -1;
 251     char buf[32];
 252     int i;
 253     extern int line;
 254
 255     reset_screen();
 256     printf("Bootloader " RBVERSION);
 257     check_battery();
 258     printf("=========================");
 259     line += FAILSAFE_OPTIONS;
 260     printf("");
 261     printf("  [NAVI] to confirm.");
 262     printf("  [REC] to set as default.");
 263     printf("");
 264
 265     if (firmware_settings.initialized)
 266     {
 267         defopt = firmware_settings.bootmethod;
 268         if (defopt < 0 || defopt >= FAILSAFE_OPTIONS)
 269             defopt = option;
 270     }
 271
 272     while (current_tick - start_tick < TIMEOUT)
 273     {
 274         /* Draw the menu. */
 275         line = 3;
 276         for (i = 0; i < FAILSAFE_OPTIONS; i++)
 277         {
 278             char *def = "[DEF]";
 279             char *arrow = "->";
 280
 281             if (i != defopt)
 282                 def = "";
 283             if (i != option)
 284                 arrow = "  ";
 285
 286             printf("%s %s %s", arrow, options[i], def);
 287         }
 288
 289         snprintf(buf, sizeof(buf), "Time left: %lds",
 290                  (TIMEOUT - (current_tick - start_tick)) / HZ);
 291         lcd_puts(0, 10, buf);
 292         lcd_update();
 293         button = button_get_w_tmo(HZ);
 294
 295         if (button == BUTTON_NONE || button & SYS_EVENT)
 296             continue ;
 297
 298         start_tick = current_tick;
 299
 300         /* Ignore the ON/PLAY -button because it can cause trouble
 301            with the RTC alarm mod. */
 302         switch (button & ~(BUTTON_ON))
 303         {
 304             case BUTTON_UP:
 305             case BUTTON_RC_REW:
 306                 if (option > 0)
 307                     option--;
 308                 break ;
 309
 310             case BUTTON_DOWN:
 311             case BUTTON_RC_FF:
 312                 if (option < FAILSAFE_OPTIONS-1)
 313                     option++;
 314                 break ;
 315
 316             case BUTTON_SELECT:
 317             case BUTTON_RC_ON:
 318                 goto execute;
 319
 320             case BUTTON_REC:
 321             case BUTTON_RC_REC:
 322                 if (firmware_settings.initialized)
 323                 {
 324                     firmware_settings.bootmethod = option;
 325                     eeprom_settings_store();
 326                     defopt = option;
 327                 }
 328                 break ;
 329         }
 330     }
 331
 332     execute:
 333
 334     lcd_puts(0, 10, "Executing command...");
 335     lcd_update();
 336     sleep(HZ);
 337     reset_screen();
 338
 339     switch (option)
 340     {
 341         case BOOT_DISK:
 342             return ;
 343
 344         case BOOT_RAM:
 345             start_flashed_ramimage();
 346             printf("Image not found");
 347             break;
 348
 349         case BOOT_ROM:
 350             start_flashed_romimage();
 351             printf("Image not found");
 352             break;
 353     }
 354
 355     shutdown();
 356 }
 357 #endif
 358
 359 /* get rid of a nasty humming sound during boot
 360  -> RESET signal */
 361 inline static void __uda1380_reset_hi(void)
 362 {
 363 #ifdef HAVE_UDA1380
 364     or_l(1<<29, &GPIO_OUT);
 365     or_l(1<<29, &GPIO_ENABLE);
 366     or_l(1<<29, &GPIO_FUNCTION);
 367 #endif
 368 }
 369
 370 inline static void __uda1380_reset_lo(void)
 371 {
 372 #ifdef HAVE_UDA1380
 373     and_l(~(1<<29), &GPIO_OUT);
 374 #endif
 375 }
 376
 377 void main(void)
 378 {
 379     int i;
 380     int rc;
 381     bool rc_on_button = false;
 382     bool on_button = false;
 383     bool rec_button = false;
 384     bool hold_status = false;
 385     int data;
 386     extern int line;        /* From common.c */
 387     extern int remote_line; /* From common.c */
 388
 389     /* We want to read the buttons as early as possible, before the user
 390        releases the ON button */
 391
 392     /* Set GPIO33, GPIO37, GPIO38  and GPIO52 as general purpose inputs
 393        (The ON and Hold buttons on the main unit and the remote) */
 394     or_l(0x00100062, &GPIO1_FUNCTION);
 395     and_l(~0x00100062, &GPIO1_ENABLE);
 396
 397     data = GPIO1_READ;
 398     if ((data & 0x20) == 0)
 399         on_button = true;
 400
 401     if ((data & 0x40) == 0)
 402         rc_on_button = true;
 403
 404     /* Set the default state of the hard drive power to OFF */
 405     ide_power_enable(false);
 406
 407     power_init();
 408
 409     /* Turn off if neither ON button is pressed */
 410     if (!(on_button || rc_on_button))
 411     {
 412         __reset_cookie();
 413         power_off();
 414     }
 415
 416     __uda1380_reset_hi();
 417
 418     /* Start with the main backlight OFF. */
 419     _backlight_init();
 420     _backlight_off();
 421
 422     /* Remote backlight ON */
 423 #ifdef HAVE_REMOTE_LCD
 424     _remote_backlight_on();
 425 #endif
 426
 427     system_init();
 428     kernel_init();
 429
 430     __uda1380_reset_lo();
 431
 432 #ifdef HAVE_ADJUSTABLE_CPU_FREQ
 433     /* Set up waitstates for the peripherals */
 434     set_cpu_frequency(0); /* PLL off */
 435 #ifdef CPU_COLDFIRE
 436     coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
 437 #endif
 438 #endif
 439     enable_irq();
 440
 441 #ifdef HAVE_EEPROM_SETTINGS
 442     initialize_eeprom();
 443 #endif
 444
 445     usb_init();
 446     /* A small delay after usb_init is necessary to read the I/O port correctly
 447        (if ports are read _immediately_ after the init). */
 448     /* sleep(1); */
 449
 450     adc_init();
 451     button_init();
 452
 453     /* Only check remote hold status if remote power button was actually used. */
 454     if (rc_on_button)
 455     {
 456         lcd_remote_init();
 457
 458         /* Allow the button driver to check the buttons */
 459         sleep(HZ/50);
 460
 461         if (remote_button_hold())
 462             hold_status = true;
 463     }
 464
 465     /* Check main hold switch status too. */
 466     if (on_button && button_hold())
 467     {
 468         hold_status = true;
 469     }
 470
 471     /* Power on the hard drive early, to speed up the loading. */
 472     if (!hold_status
 473 # ifdef HAVE_EEPROM_SETTINGS
 474         && !recovery_mode
 475 # endif
 476         )
 477     {
 478         ide_power_enable(true);
 479     }
 480
 481 # ifdef HAVE_EEPROM_SETTINGS
 482     if (!hold_status && (usb_detect() != USB_INSERTED) && !recovery_mode)
 483         try_flashboot();
 484 # endif
 485
 486     backlight_init();
 487
 488
 489     lcd_init();
 490
 491     if (!rc_on_button)
 492         lcd_remote_init();
 493
 494     /* Bootloader uses simplified backlight thread, so we need to enable
 495        remote display here. */
 496     if (remote_detect())
 497         lcd_remote_on();
 498
 499     font_init();
 500
 501     lcd_setfont(FONT_SYSFIXED);
 502
 503     printf("Rockbox boot loader");
 504     printf("Version " RBVERSION);
 505
 506     /* No need to wait here more because lcd_init and others already do that. */
 507     // sleep(HZ/50); /* Allow the button driver to check the buttons */
 508     rec_button = ((button_status() & BUTTON_REC) == BUTTON_REC)
 509         || ((button_status() & BUTTON_RC_REC) == BUTTON_RC_REC);
 510
 511     check_battery();
 512
 513     /* Don't start if the Hold button is active on the device you
 514        are starting with */
 515     if ((usb_detect() != USB_INSERTED) && (hold_status
 516 #ifdef HAVE_EEPROM_SETTINGS
 517                           || recovery_mode
 518 #endif
 519                           ))
 520     {
 521         if (detect_original_firmware())
 522         {
 523             printf("Hold switch on");
 524             shutdown();
 525         }
 526
 527 #ifdef HAVE_EEPROM_SETTINGS
 528         failsafe_menu();
 529 #endif
 530     }
 531
 532     /* Holding REC while starting runs the original firmware */
 533     if (detect_original_firmware() && rec_button)
 534     {
 535         printf("Starting original firmware...");
 536         start_iriver_fw();
 537     }
 538
 539     /* A hack to enter USB mode without using the USB thread */
 540     if(usb_detect() == USB_INSERTED)
 541     {
 542         const char msg[] = "Bootloader USB mode";
 543         int w, h;
 544         font_getstringsize(msg, &w, &h, FONT_SYSFIXED);
 545         reset_screen();
 546         lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
 547         lcd_update();
 548
 549 #ifdef HAVE_REMOTE_LCD
 550         lcd_remote_puts(0, 3, msg);
 551         lcd_remote_update();
 552 #endif
 553
 554 #ifdef HAVE_EEPROM_SETTINGS
 555         if (firmware_settings.initialized)
 556         {
 557             firmware_settings.disk_clean = false;
 558             eeprom_settings_store();
 559         }
 560 #endif
 561         ide_power_enable(true);
 562         storage_enable(false);
 563         sleep(HZ/20);
 564         usb_enable(true);
 565         cpu_idle_mode(true);
 566         while (usb_detect() == USB_INSERTED)
 567         {
 568             /* Print the battery status. */
 569             line = 0;
 570             remote_line = 0;
 571             check_battery();
 572
 573             storage_spin(); /* Prevent the drive from spinning down */
 574             sleep(HZ);
 575
 576             /* Backlight OFF */
 577             _backlight_off();
 578         }
 579
 580         cpu_idle_mode(false);
 581         usb_enable(false);
 582
 583         reset_screen();
 584         lcd_update();
 585     }
 586
 587     rc = storage_init();
 588     if(rc)
 589     {
 590         reset_screen();
 591         printf("ATA error: %d", rc);
 592         printf("Insert USB cable and press");
 593         printf("a button");
 594         while(!(button_get(true) & BUTTON_REL));
 595     }
 596
 597
 598     disk_init();
 599
 600     rc = disk_mount_all();
 601     if (rc<=0)
 602     {
 603         reset_screen();
 604         printf("No partition found");
 605         while(button_get(true) != SYS_USB_CONNECTED) {};
 606     }
 607
 608     printf("Loading firmware");
 609     i = load_firmware((unsigned char *)DRAM_START, BOOTFILE, MAX_LOADSIZE);
 610     if(i < 0)
 611         printf("Error: %s", strerror(i));
 612
 613     if (i == EOK)
 614         start_firmware();
 615
 616     if (!detect_original_firmware())
 617     {
 618         printf("No firmware found on disk");
 619         sleep(HZ*2);
 620         shutdown();
 621     }
 622     else {
 623         sleep(HZ*2);
 624         start_iriver_fw();
 625     }
 626 }
 627
 628 /* These functions are present in the firmware library, but we reimplement
 629    them here because the originals do a lot more than we want */
 630 void screen_dump(void)
 631 {
 632 }
 633
 634 int usb_screen(void)
 635 {
 636    return 0;
 637 }
 638
 639 unsigned short *bidi_l2v(const unsigned char *str, int orientation)
 640 {
 641     static unsigned short utf16_buf[SCROLL_LINE_SIZE];
 642     unsigned short *target;
 643     (void)orientation;
 644
 645     target = utf16_buf;
 646
 647     while (*str)
 648         str = utf8decode(str, target++);
 649     *target = 0;
 650     return utf16_buf;
 651 }