2 * This config file is for the Sandisk Sansa e200
4 #define TARGET_TREE /* this target is using the target tree system */
6 /* For Rolo and boot loader */
7 #define MODEL_NUMBER 16
8 #define MODEL_NAME "Sandisk Sansa e200 series"
10 #define HW_SAMPR_CAPS (SAMPR_CAP_44)
12 /* define this if you have recording possibility */
13 #define HAVE_RECORDING
15 #define REC_SAMPR_CAPS (SAMPR_CAP_22)
16 #define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
17 #define REC_SAMPR_DEFAULT SAMPR_22
19 /* Define bitmask of input sources - recordable bitmask can be defined
20 explicitly if different */
21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
23 /* define this if you have a bitmap LCD display */
24 #define HAVE_LCD_BITMAP
26 /* define this if you have a colour LCD */
27 #define HAVE_LCD_COLOR
29 /* define this if you want album art for this target */
32 /* define this to enable bitmap scaling */
33 #define HAVE_BMP_SCALING
35 /* define this to enable JPEG decoding */
38 /* define this if you have a light associated with the buttons */
39 #define HAVE_BUTTON_LIGHT
41 /* define this if you have access to the quickscreen */
42 #define HAVE_QUICKSCREEN
44 /* define this if you have access to the pitchscreen */
45 #define HAVE_PITCHSCREEN
47 /* define this if you would like tagcache to build on this target */
52 #define LCD_HEIGHT 220
53 #define LCD_DEPTH 16 /* 65536 colours */
54 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
57 /* define this if you have LCD enable function */
58 #define HAVE_LCD_ENABLE
60 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
61 should be defined as well. */
62 #define HAVE_LCD_SLEEP
63 #define HAVE_LCD_SLEEP_SETTING
66 /* define this if you can flip your LCD */
69 /* define this if you can invert the colours on your LCD */
70 #define HAVE_LCD_INVERT
72 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
74 #define CONFIG_KEYPAD SANSA_E200_PAD
76 /* Define this to enable morse code input */
77 #define HAVE_MORSE_INPUT
79 /* Define this if you do software codec */
80 #define CONFIG_CODEC SWCODEC
81 /* There is no hardware tone control */
82 #define HAVE_SW_TONE_CONTROLS
83 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
86 /* define this if you have a real-time clock */
88 #define CONFIG_RTC RTC_AS3514
91 /* Define this if you have a software controlled poweroff */
92 #define HAVE_SW_POWEROFF
94 /* Some Sansa E200s seem to be FAT16 formatted */
95 #define HAVE_FAT16SUPPORT
97 /* The number of bytes reserved for loadable codecs */
98 #define CODEC_SIZE 0x100000
100 /* The number of bytes reserved for loadable plugins */
101 #define PLUGIN_BUFFER_SIZE 0x80000
103 #define AB_REPEAT_ENABLE 1
106 #define CONFIG_TUNER LV24020LP
107 #define HAVE_TUNER_PWR_CTRL
109 /* Define this for LCD backlight available */
110 #define HAVE_BACKLIGHT
111 #define HAVE_BACKLIGHT_BRIGHTNESS
113 /* Which backlight fading type? */
114 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
116 /* define this if the unit uses a scrollwheel for navigation */
117 #define HAVE_SCROLLWHEEL
118 /* define to activate advanced wheel acceleration code */
119 #define HAVE_WHEEL_ACCELERATION
120 /* define from which rotation speed [degree/sec] on the acceleration starts */
121 #define WHEEL_ACCEL_START 540
122 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
123 #define WHEEL_ACCELERATION 1
125 /* define this if you have a flash memory storage */
126 #define HAVE_FLASH_STORAGE
128 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
129 #define CONFIG_STORAGE STORAGE_SD
131 #define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
132 #define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
133 #define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
134 #define BATTERY_CAPACITY_INC 0 /* capacity increment */
135 #define BATTERY_TYPES_COUNT 1 /* only one type */
137 /* Charging implemented in a target-specific algorithm */
138 #define CONFIG_CHARGING CHARGING_TARGET
139 #define HAVE_POWEROFF_WHILE_CHARGING
141 /* define current usage levels */
142 #define CURRENT_NORMAL 30 /* Toni's measurements in Nov 2008 */
143 #define CURRENT_BACKLIGHT 40 /* Screen is about 20, blue LEDs are another 20, so 40 if both */
144 #define CURRENT_RECORD 30 /* flash player, so this is just unboosted current*/
146 /* define this if the unit can be powered or charged via USB */
147 #define HAVE_USB_POWER
149 /* Define this if you have a PortalPlayer PP5024 */
150 #define CONFIG_CPU PP5024
152 /* Define this if you want to use the PP5024 i2c interface */
153 #define CONFIG_I2C I2C_PP5024
155 /* define this if the hardware can be powered off while charging */
156 /* Sansa can't be powered off while charging */
157 /* #define HAVE_POWEROFF_WHILE_CHARGING */
159 /* The start address index for ROM builds */
160 #define ROM_START 0x00000000
162 /* Define this to the CPU frequency */
163 #define CPU_FREQ 75000000
165 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
166 #define CONFIG_LCD LCD_X5
168 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
169 only used when loading the old format rockbox.e200 file */
170 #define FIRMWARE_OFFSET_FILE_CRC 0x0
171 #define FIRMWARE_OFFSET_FILE_DATA 0x8
174 #define HAVE_MULTIDRIVE
180 #define CONFIG_USBOTG USBOTG_ARC
182 /* enable these for the experimental usb stack */
183 #define HAVE_USBSTACK
184 #define USE_ROCKBOX_USB
185 #define USB_VENDOR_ID 0x0781
186 #define USB_PRODUCT_ID 0x7421
187 #define HAVE_USB_HID_MOUSE
189 /* Define this if you have adjustable CPU frequency */
190 #define HAVE_ADJUSTABLE_CPU_FREQ
193 #define BOOTFILE_EXT "mi4"
194 #define BOOTFILE "rockbox." BOOTFILE_EXT
195 #define BOOTDIR "/.rockbox"
197 #define ICODE_ATTR_TREMOR_NOT_MDCT
199 #define INCLUDE_TIMEOUT_API
201 /** Port-specific settings **/
203 /* Main LCD backlight brightness range and defaults */
204 #define MIN_BRIGHTNESS_SETTING 1
205 #define MAX_BRIGHTNESS_SETTING 12
206 #define DEFAULT_BRIGHTNESS_SETTING 6
208 /* Default recording levels */
209 #define DEFAULT_REC_MIC_GAIN 23
210 #define DEFAULT_REC_LEFT_GAIN 23
211 #define DEFAULT_REC_RIGHT_GAIN 23
213 #ifdef E200R_INSTALLER
214 #define IRAMORIG 0x40004000
217 /* Define this if a programmable hotkey is mapped */