firmware/export/config-ipodvideo.h

   1 /*
   2  * This config file is for the Apple iPod Video
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Video"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 5
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  25                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  26                          SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
  27
  28 /* define the bitmask of recording sample rates */
  29 #define REC_SAMPR_CAPS  HW_SAMPR_CAPS
  30
  31 /* define this if you have a bitmap LCD display */
  32 #define HAVE_LCD_BITMAP
  33
  34 /* define this if you have a colour LCD */
  35 #define HAVE_LCD_COLOR
  36
  37 /* define this if you want album art for this target */
  38 #define HAVE_ALBUMART
  39
  40 /* define this to enable bitmap scaling */
  41 #define HAVE_BMP_SCALING
  42
  43 /* define this to enable JPEG decoding */
  44 #define HAVE_JPEG
  45
  46 /* define this if you have access to the quickscreen */
  47 #define HAVE_QUICKSCREEN
  48 /* define this if you have access to the pitchscreen */
  49 #define HAVE_PITCHSCREEN
  50
  51 /* define this if you would like tagcache to build on this target */
  52 #define HAVE_TAGCACHE
  53
  54 /* LCD dimensions */
  55 #define LCD_WIDTH  320
  56 #define LCD_HEIGHT 240
  57 #define LCD_DEPTH  16   /* 65536 colours */
  58 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  59
  60 /* LCD stays visible without backlight - simulator hint */
  61 #define HAVE_TRANSFLECTIVE_LCD
  62
  63 #define CONFIG_KEYPAD IPOD_4G_PAD
  64
  65 /* Define this if you do software codec */
  66 #define CONFIG_CODEC SWCODEC
  67
  68 /* define this if you have a real-time clock */
  69 #define CONFIG_RTC RTC_PCF50605
  70
  71 /* Define if the device can wake from an RTC alarm */
  72 #define HAVE_RTC_ALARM
  73
  74 /* Define this if you can switch on/off the accessory power supply */
  75 #define HAVE_ACCESSORY_SUPPLY
  76
  77 /* Define this if you have a software controlled poweroff */
  78 #define HAVE_SW_POWEROFF
  79
  80 /* The number of bytes reserved for loadable codecs */
  81 #define CODEC_SIZE 0x100000
  82
  83 /* The number of bytes reserved for loadable plugins */
  84 #define PLUGIN_BUFFER_SIZE 0x80000
  85
  86 /* Define this if you have the WM8758 audio codec */
  87 #define HAVE_WM8758
  88
  89 #define AB_REPEAT_ENABLE 1
  90 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  91
  92 /* define this if you have a disk storage, i.e. something
  93    that needs spinups and can cause skips when shaked */
  94 #define HAVE_DISK_STORAGE
  95
  96 /* Define this for LCD backlight available */
  97 #define HAVE_BACKLIGHT
  98 #define HAVE_BACKLIGHT_BRIGHTNESS
  99
 100 #ifndef BOOTLOADER
 101 /* Support for LCD sleep/BCM shutdown */
 102 #define HAVE_LCD_SLEEP
 103 #define HAVE_LCD_SLEEP_SETTING
 104 /* The same code may also be used when shutting down the iPod */
 105 #define HAVE_LCD_SHUTDOWN
 106 #endif
 107
 108 /* We can fade the backlight by using PWM */
 109 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 110
 111 /* Main LCD backlight brightness range and defaults */
 112 #define MIN_BRIGHTNESS_SETTING      1
 113 #define MAX_BRIGHTNESS_SETTING      32
 114 #define DEFAULT_BRIGHTNESS_SETTING  16
 115
 116
 117 /* define this if the unit uses a scrollwheel for navigation */
 118 #define HAVE_SCROLLWHEEL
 119 /* define to activate advanced wheel acceleration code */
 120 #define HAVE_WHEEL_ACCELERATION
 121 /* define from which rotation speed [degree/sec] on the acceleration starts */
 122 #define WHEEL_ACCEL_START 270
 123 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 124 #define WHEEL_ACCELERATION 3
 125
 126 /* Define this if you can detect headphones */
 127 #define HAVE_HEADPHONE_DETECTION
 128
 129 /* Type of mobile power */
 130 #if (MEM==32)  /* this is the 30GB-model */
 131 # define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity for the 30GB model */
 132 # define BATTERY_CAPACITY_MIN     300 /* min. capacity selectable */
 133 # define BATTERY_CAPACITY_MAX     800 /* max. capacity selectable */
 134 #else          /* these are the 60/80GB-models */
 135 # define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity for the 60/80GB model */
 136 # define BATTERY_CAPACITY_MIN     500 /* min. capacity selectable */
 137 # define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 138 #endif
 139 #define BATTERY_CAPACITY_INC       50 /* capacity increment */
 140 #define BATTERY_TYPES_COUNT         1 /* only one type */
 141
 142 /* Hardware controlled charging with monitoring */
 143 #define CONFIG_CHARGING CHARGING_MONITOR
 144
 145 /* define this if the unit can be powered or charged via USB */
 146 #define HAVE_USB_POWER
 147
 148 /* define current usage levels */
 149 #define CURRENT_NORMAL     35  /* MP3: ~11h out of 400mAh battery (30GB) or ~17h out of 600mAh (60GB) */
 150 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 151 #if defined(HAVE_RECORDING)
 152 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 153 #endif
 154
 155 #ifndef SIMULATOR
 156
 157 /* Define this if you have a PortalPlayer PP5022 */
 158 #define CONFIG_CPU PP5022
 159
 160 /* Define this if you want to use the PP5020 i2c interface */
 161 #define CONFIG_I2C I2C_PP5020
 162
 163 /* We're able to shut off power to the HDD */
 164 #define HAVE_ATA_POWER_OFF
 165
 166 /* define this if the hardware can be powered off while charging */
 167 //#define HAVE_POWEROFF_WHILE_CHARGING
 168
 169 /* The start address index for ROM builds */
 170 #define ROM_START 0x00000000
 171
 172 /* The size of the flash ROM */
 173 #define FLASH_SIZE 0x100000
 174
 175 /* Define this to the CPU frequency */
 176 #define CPU_FREQ      11289600
 177
 178 #define CONFIG_LCD LCD_IPODVIDEO
 179
 180 /* Offset ( in the firmware file's header ) to the file length */
 181 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 182
 183 /* Offset ( in the firmware file's header ) to the file CRC */
 184 #define FIRMWARE_OFFSET_FILE_CRC 0
 185
 186 /* Offset ( in the firmware file's header ) to the real data */
 187 #define FIRMWARE_OFFSET_FILE_DATA 8
 188
 189 /* USB On-the-go */
 190 #define CONFIG_USBOTG USBOTG_ARC
 191
 192 /* enable these for the experimental usb stack */
 193 #define HAVE_USBSTACK
 194 #define USE_ROCKBOX_USB
 195 #define USB_VENDOR_ID 0x05ac
 196 #define USB_PRODUCT_ID 0x1209
 197
 198 /* Virtual LED (icon) */
 199 #define CONFIG_LED LED_VIRTUAL
 200
 201 /* Define this if you have adjustable CPU frequency */
 202 #define HAVE_ADJUSTABLE_CPU_FREQ
 203
 204 /* Define this if you can read an absolute wheel position */
 205 #define HAVE_WHEEL_POSITION
 206
 207 /* define this if the device has larger sectors when accessed via USB */
 208 /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
 209 #define MAX_LOG_SECTOR_SIZE 2048
 210
 211 /* define this if the hard drive uses large physical sectors (ATA-7 feature) */
 212 /* and doesn't handle them in the drive firmware */
 213 #define MAX_PHYS_SECTOR_SIZE 1024
 214
 215 #define BOOTFILE_EXT "ipod"
 216 #define BOOTFILE "rockbox." BOOTFILE_EXT
 217 #define BOOTDIR "/.rockbox"
 218
 219 #define ICODE_ATTR_TREMOR_NOT_MDCT
 220
 221 #define IPOD_ACCESSORY_PROTOCOL
 222 #define HAVE_SERIAL
 223
 224 #endif