firmware/export/config-h100.h

   1 #if defined(MEM) && (MEM > 16)
   2 #error "re-run configure this just so wrong"
   3 #endif
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /*
   8  * This config file is for iriver iHP-100, iHP-110, iHP-115
   9  */
  10 #define IRIVER_H100_SERIES 1
  11
  12 #define MODEL_NAME "iriver iHP-100 series"
  13
  14 /* For Rolo and boot loader */
  15 #define MODEL_NUMBER 1
  16
  17 /* define this if you use an ATA controller */
  18 #define CONFIG_STORAGE STORAGE_ATA
  19
  20 /* define this if you have a bitmap LCD display */
  21 #define HAVE_LCD_BITMAP
  22
  23 /* define this if you want album art for this target */
  24 #define HAVE_ALBUMART
  25
  26 /* define this to enable bitmap scaling */
  27 #define HAVE_BMP_SCALING
  28
  29 /* define this to enable JPEG decoding */
  30 #define HAVE_JPEG
  31
  32 /* define this if you can flip your LCD */
  33 #define HAVE_LCD_FLIP
  34
  35 /* define this if you can invert the colours on your LCD */
  36 #define HAVE_LCD_INVERT
  37
  38 /* define this if you have access to the quickscreen */
  39 #define HAVE_QUICKSCREEN
  40 /* define this if you have access to the pitchscreen */
  41 #define HAVE_PITCHSCREEN
  42
  43 /* define this if you would like tagcache to build on this target */
  44 #define HAVE_TAGCACHE
  45
  46 /* LCD dimensions */
  47 #define LCD_WIDTH  160
  48 #define LCD_HEIGHT 128
  49 #define LCD_DEPTH  2
  50
  51 #define LCD_PIXELFORMAT VERTICAL_PACKING
  52
  53 /* Display colours, for screenshots and sim (0xRRGGBB) */
  54 #define LCD_DARKCOLOR       0x000000
  55 #define LCD_BRIGHTCOLOR     0x5a915a
  56 #define LCD_BL_DARKCOLOR    0x000000
  57 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  58
  59 /* remote LCD */
  60 #define LCD_REMOTE_WIDTH  128
  61 #define LCD_REMOTE_HEIGHT 64
  62 #define LCD_REMOTE_DEPTH  1
  63
  64 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  65
  66 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  67 #define LCD_REMOTE_DARKCOLOR       0x000000
  68 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  69 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  70 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  71
  72 #define CONFIG_KEYPAD IRIVER_H100_PAD
  73
  74 #define CONFIG_REMOTE_KEYPAD H100_REMOTE
  75
  76 /* Define this if you do software codec */
  77 #define CONFIG_CODEC SWCODEC
  78
  79 /* Define this if you have an remote lcd */
  80 #define HAVE_REMOTE_LCD
  81
  82 /* Define if we have a hardware defect that causes ticking on the audio line */
  83 #define HAVE_REMOTE_LCD_TICKING
  84
  85 #define CONFIG_LCD LCD_S1D15E06
  86
  87 /* define this if you have a disk storage, i.e. something
  88    that needs spinups and can cause skips when shaked */
  89 #define HAVE_DISK_STORAGE
  90
  91 /* Define this for LCD backlight available */
  92 #define HAVE_BACKLIGHT
  93
  94 /* We can fade the backlight by using PWM */
  95 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  96
  97 /* Define this if you have a software controlled poweroff */
  98 #define HAVE_SW_POWEROFF
  99
 100 /* The number of bytes reserved for loadable codecs */
 101 #define CODEC_SIZE 0x100000
 102
 103 /* The number of bytes reserved for loadable plugins */
 104 #define PLUGIN_BUFFER_SIZE 0x80000
 105
 106 #define AB_REPEAT_ENABLE 1
 107
 108 #define CONFIG_TUNER TEA5767
 109 #define CONFIG_TUNER_XTAL 32768
 110
 111 #define HAVE_UDA1380
 112
 113 /* define this if you have recording possibility */
 114 #define HAVE_RECORDING
 115
 116 /* define hardware samples rate caps mask */
 117 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 118
 119 /* define the bitmask of recording sample rates */
 120 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 121
 122 #define HAVE_AGC
 123
 124 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 125 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 126 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 127 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 128 #define BATTERY_TYPES_COUNT  1    /* only one type */
 129
 130 /* Hardware controlled charging */
 131 #define CONFIG_CHARGING CHARGING_SIMPLE
 132
 133 /* define current usage levels */
 134 #define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery */
 135 #define CURRENT_BACKLIGHT  23  /* from IriverBattery twiki page */
 136 #define CURRENT_SPDIF_OUT  10  /* optical SPDIF output on */
 137 #define CURRENT_RECORD    105  /* additional current while recording */
 138 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 139
 140 #ifndef SIMULATOR
 141
 142 /* Define this if you have a Motorola SCF5249 */
 143 #define CONFIG_CPU MCF5249
 144
 145 /* Define this if you want to use coldfire's i2c interface */
 146 #define CONFIG_I2C I2C_COLDFIRE
 147
 148 /* Define this if you can run rockbox from flash memory */
 149 /* In theory we can, but somebody needs to verify there are no issues. */
 150 #define HAVE_FLASHED_ROCKBOX
 151
 152 /* define this if the hardware can be powered off while charging */
 153 #define HAVE_POWEROFF_WHILE_CHARGING
 154
 155 /* The size of the flash ROM */
 156 #define FLASH_SIZE 0x200000
 157
 158 /* Define this to the CPU frequency */
 159 #define CPU_FREQ      11289600
 160
 161 /* Define this if you have ATA power-off control */
 162 #define HAVE_ATA_POWER_OFF
 163
 164 /* Offset ( in the firmware file's header ) to the file CRC */
 165 #define FIRMWARE_OFFSET_FILE_CRC 0
 166
 167 /* Offset ( in the firmware file's header ) to the real data */
 168 #define FIRMWARE_OFFSET_FILE_DATA 8
 169
 170 #define HAVE_ATA_LED_CTRL
 171
 172 /* Define this if you have adjustable CPU frequency */
 173 #define HAVE_ADJUSTABLE_CPU_FREQ
 174
 175 #define BOOTFILE_EXT "iriver"
 176 #define BOOTFILE "rockbox." BOOTFILE_EXT
 177 #define BOOTDIR "/.rockbox"
 178
 179 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 180 #define FLASH_RAMIMAGE_ENTRY   0x00001000
 181 #define FLASH_ROMIMAGE_ENTRY   0x00100000
 182 #define FLASH_MAGIC            0xfbfbfbf2
 183
 184 /* Define this if there is an EEPROM chip */
 185 #define HAVE_EEPROM
 186
 187 /* Define this if the EEPROM chip is used */
 188 #define HAVE_EEPROM_SETTINGS
 189
 190 #endif /* !SIMULATOR */
 191
 192 /* Define bitmask of input sources - recordable bitmask can be defined
 193    explicitly if different */
 194 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
 195                         SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
 196
 197 /* Define this for S/PDIF output available */
 198 #define HAVE_SPDIF_OUT
 199
 200 /* Define this if you can control the S/PDIF power */
 201 #define HAVE_SPDIF_POWER
 202 #define SPDIF_POWER_INVERTED
 203
 204 /* Define this for FM radio input available */
 205 #define HAVE_FMRADIO_IN
 206
 207 /** Port-specific settings **/
 208
 209 #define HAVE_LCD_CONTRAST
 210
 211 /* Main LCD backlight brightness range and defaults */
 212 #define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
 213 #define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
 214 #define DEFAULT_CONTRAST_SETTING    27
 215
 216 /* Remote LCD contrast range and defaults */
 217 #define MIN_REMOTE_CONTRAST_SETTING     5
 218 #define MAX_REMOTE_CONTRAST_SETTING     63
 219 #define DEFAULT_REMOTE_CONTRAST_SETTING 42