firmware/export/config-gigabeat.h

   1 /*
   2  * This config file is for toshiba Gigabeat F
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define TOSHIBA_GIGABEAT_F 1
   7
   8 #define MODEL_NAME "Toshiba Gigabeat F"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 18
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have a bitmap LCD display */
  17 #define HAVE_LCD_BITMAP
  18
  19 /* define this if you have a colour LCD */
  20 #define HAVE_LCD_COLOR
  21
  22 /* define this if you want album art for this target */
  23 #define HAVE_ALBUMART
  24
  25 /* define this to enable bitmap scaling */
  26 #define HAVE_BMP_SCALING
  27
  28 /* define this to enable JPEG decoding */
  29 #define HAVE_JPEG
  30
  31 /* define this if you have access to the quickscreen */
  32 #define HAVE_QUICKSCREEN
  33
  34 /* define this if you have access to the pitchscreen */
  35 #define HAVE_PITCHSCREEN
  36
  37 /* define this if you would like tagcache to build on this target */
  38 #define HAVE_TAGCACHE
  39
  40 /* define this if the target has volume keys which can be used in the lists */
  41 #define HAVE_VOLUME_IN_LIST
  42
  43 /* LCD dimensions */
  44 #define LCD_WIDTH  240
  45 #define LCD_HEIGHT 320
  46 #define LCD_DEPTH  16   /* 65k colours */
  47 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  48
  49 #ifndef BOOTLOADER
  50 /* Define this if your LCD can be enabled/disabled */
  51 #define HAVE_LCD_ENABLE
  52
  53 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  54    should be defined as well. */
  55 #define HAVE_LCD_SLEEP
  56 /* We don't use a setting but a fixed delay after the backlight has
  57  * turned off */
  58 #define LCD_SLEEP_TIMEOUT (5*HZ)
  59
  60 #define HAVE_TOUCHPAD_SENSITIVITY_SETTING
  61
  62 #ifndef SIMULATOR
  63 #define HAVE_HARDWARE_BEEP
  64 #endif
  65
  66 #endif /* BOOTLOADER */
  67
  68 #define CONFIG_KEYPAD GIGABEAT_PAD
  69
  70 /* Define this if you do software codec */
  71 #define CONFIG_CODEC SWCODEC
  72
  73 /* define this if you have a real-time clock */
  74 #define CONFIG_RTC RTC_S3C2440
  75
  76 /* define this if you have a disk storage, i.e. something
  77    that needs spinups and can cause skips when shaked */
  78 #define HAVE_DISK_STORAGE
  79
  80 /* Define this for LCD backlight available */
  81 #define HAVE_BACKLIGHT
  82
  83 #define HAVE_BUTTON_LIGHT
  84
  85 #define HAVE_BACKLIGHT_BRIGHTNESS
  86
  87 #define HAVE_BUTTONLIGHT_BRIGHTNESS
  88
  89 /* Main LCD backlight brightness range and defaults */
  90 #define MIN_BRIGHTNESS_SETTING          1   /* 0.5 mA */
  91 #define MAX_BRIGHTNESS_SETTING          12  /* 32 mA */
  92 #define DEFAULT_BRIGHTNESS_SETTING      10  /* 16 mA */
  93
  94 /* Define this if you have a software controlled poweroff */
  95 #define HAVE_SW_POWEROFF
  96
  97 /* The number of bytes reserved for loadable codecs */
  98 #define CODEC_SIZE 0x100000
  99
 100 /* The number of bytes reserved for loadable plugins */
 101 #define PLUGIN_BUFFER_SIZE 0x80000
 102
 103 #define AB_REPEAT_ENABLE 1
 104
 105 /* Define this if you have the WM8975 audio codec */
 106 #define HAVE_WM8751
 107
 108 /* Define this if you want to use the adaptive bass capibility of the 8751 */
 109 /* #define USE_ADAPTIVE_BASS */
 110
 111 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
 112                        SAMPR_CAP_11)
 113
 114 /* All exact rates for 16.9344MHz clock */
 115 #define CODEC_SRCTRL_11025HZ     (0x19 << 1)
 116 #define CODEC_SRCTRL_22050HZ     (0x1b << 1)
 117 #define CODEC_SRCTRL_44100HZ     (0x11 << 1)
 118 #define CODEC_SRCTRL_88200HZ     (0x1f << 1)
 119
 120 #define HAVE_HEADPHONE_DETECTION
 121
 122 #define BATTERY_CAPACITY_DEFAULT 830 /* default battery capacity */
 123 #define BATTERY_CAPACITY_MIN 830        /* min. capacity selectable */
 124 #define BATTERY_CAPACITY_MAX 830        /* max. capacity selectable */
 125 #define BATTERY_CAPACITY_INC 25         /* capacity increment */
 126 #define BATTERY_TYPES_COUNT  1          /* only one type */
 127
 128 /* Hardware controlled charging with monitoring */
 129 #define CONFIG_CHARGING CHARGING_MONITOR
 130
 131 /* define current usage levels */
 132 #define CURRENT_NORMAL     46 /* 18 hours from an 830 mah battery*/
 133 #define CURRENT_BACKLIGHT  30 /* seems reasonable */
 134 #define CURRENT_RECORD     0  /* no recording on the gigabeat F/X */
 135
 136 /* define this if the unit can be powered or charged via USB */
 137 #define HAVE_USB_POWER
 138
 139 /* define this if the unit has a battery switch or battery can be removed
 140  * when running */
 141 #define HAVE_BATTERY_SWITCH
 142
 143 #ifndef SIMULATOR
 144
 145 /* The LCD on a Gigabeat is 240x320 - it is portrait */
 146 #define HAVE_PORTRAIT_LCD
 147
 148 #define HAVE_LCD_FLIP
 149
 150 /* Define this if your LCD can set contrast */
 151 #define HAVE_LCD_CONTRAST
 152
 153 #define MIN_CONTRAST_SETTING        0
 154 #define MAX_CONTRAST_SETTING        63
 155 #define DEFAULT_CONTRAST_SETTING    47 /* Match boot contrast */
 156
 157 /* LCD invert - does not currently work */
 158 /* #define HAVE_LCD_INVERT */
 159
 160 /* Define this if you have a Motorola SCF5249 */
 161 #define CONFIG_CPU S3C2440
 162
 163 /* Define this if you want to use coldfire's i2c interface */
 164 #define CONFIG_I2C I2C_S3C2440
 165
 166 /* define this if the hardware can be powered off while charging */
 167 #define HAVE_POWEROFF_WHILE_CHARGING
 168
 169 /* The size of the flash ROM */
 170 #define FLASH_SIZE 0x400000
 171
 172 /* Define this to the CPU frequency */
 173 #define CPU_FREQ 16934400
 174
 175 /* Define this if you have ATA power-off control */
 176 #define HAVE_ATA_POWER_OFF
 177
 178 #define CONFIG_LCD LCD_GIGABEAT
 179
 180 /* Offset ( in the firmware file's header ) to the file CRC */
 181 #define FIRMWARE_OFFSET_FILE_CRC 0
 182
 183 /* Offset ( in the firmware file's header ) to the real data */
 184 #define FIRMWARE_OFFSET_FILE_DATA 8
 185
 186 /* Define this if you have adjustable CPU frequency */
 187 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 188
 189 #define BOOTFILE_EXT "gigabeat"
 190 #define BOOTFILE "rockbox." BOOTFILE_EXT
 191 #define BOOTDIR "/.rockbox"
 192
 193 #endif