5042 stop using deprecated atomic functions
[illumos-gate.git] / usr / src / uts / i86pc / vm / hat_pte.h
blob756df7020a7f2fd8ad4c6112edd6005448a3a171
1 /*
2 * CDDL HEADER START
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
19 * CDDL HEADER END
22 * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
26 #ifndef _VM_HAT_PTE_H
27 #define _VM_HAT_PTE_H
29 #ifdef __cplusplus
30 extern "C" {
31 #endif
33 #include <sys/types.h>
34 #include <sys/mach_mmu.h>
37 * macros to get/set/clear the PTE fields
39 #define PTE_SET(p, f) ((p) |= (f))
40 #define PTE_CLR(p, f) ((p) &= ~(x86pte_t)(f))
41 #define PTE_GET(p, f) ((p) & (f))
44 * Handy macro to check if a pagetable entry or pointer is valid
46 #define PTE_ISVALID(p) PTE_GET(p, PT_VALID)
49 * Does a PTE map a large page.
51 #define PTE_IS_LGPG(p, l) ((l) > 0 && PTE_GET((p), PT_PAGESIZE))
54 * does this PTE represent a page (not a pointer to another page table)?
56 #define PTE_ISPAGE(p, l) \
57 (PTE_ISVALID(p) && ((l) == 0 || PTE_GET(p, PT_PAGESIZE)))
60 * Handy macro to check if 2 PTE's are the same - ignores REF/MOD bits.
61 * On the 64 bit hypervisor we also have to ignore the high order
62 * software bits and the global/user bit which are set/cleared
63 * capriciously (by the hypervisor!)
65 #if defined(__amd64) && defined(__xpv)
66 #define PT_IGNORE ((0x7fful << 52) | PT_GLOBAL | PT_USER)
67 #else
68 #define PT_IGNORE (0)
69 #endif
70 #define PTE_EQUIV(a, b) (((a) | (PT_IGNORE | PT_REF | PT_MOD)) == \
71 ((b) | (PT_IGNORE | PT_REF | PT_MOD)))
74 * Shorthand for converting a PTE to it's pfn.
76 #define PTE2MFN(p, l) \
77 mmu_btop(PTE_GET((p), PTE_IS_LGPG((p), (l)) ? PT_PADDR_LGPG : PT_PADDR))
78 #ifdef __xpv
79 #define PTE2PFN(p, l) pte2pfn(p, l)
80 #else
81 #define PTE2PFN(p, l) PTE2MFN(p, l)
82 #endif
84 #define PT_NX (0x8000000000000000ull)
85 #define PT_PADDR (0x000ffffffffff000ull)
86 #define PT_PADDR_LGPG (0x000fffffffffe000ull) /* phys addr for large pages */
89 * Macros to create a PTP or PTE from the pfn and level
91 #ifdef __xpv
94 * we use the highest order bit in physical address pfns to mark foreign mfns
96 #ifdef _LP64
97 #define PFN_IS_FOREIGN_MFN (1ul << 51)
98 #else
99 #define PFN_IS_FOREIGN_MFN (1ul << 31)
100 #endif
102 #define MAKEPTP(pfn, l) \
103 (pa_to_ma(pfn_to_pa(pfn)) | mmu.ptp_bits[(l) + 1])
104 #define MAKEPTE(pfn, l) \
105 ((pfn & PFN_IS_FOREIGN_MFN) ? \
106 ((pfn_to_pa(pfn & ~PFN_IS_FOREIGN_MFN) | mmu.pte_bits[l]) | \
107 PT_FOREIGN | PT_REF | PT_MOD) : \
108 (pa_to_ma(pfn_to_pa(pfn)) | mmu.pte_bits[l]))
109 #else
110 #define MAKEPTP(pfn, l) \
111 (pfn_to_pa(pfn) | mmu.ptp_bits[(l) + 1])
112 #define MAKEPTE(pfn, l) \
113 (pfn_to_pa(pfn) | mmu.pte_bits[l])
114 #endif
117 * The idea of "level" refers to the level where the page table is used in the
118 * the hardware address translation steps. The level values correspond to the
119 * following names of tables used in AMD/Intel architecture documents:
121 * AMD/INTEL name Level #
122 * ---------------------- -------
123 * Page Map Level 4 3
124 * Page Directory Pointer 2
125 * Page Directory 1
126 * Page Table 0
128 * The numbering scheme is such that the values of 0 and 1 can correspond to
129 * the pagesize codes used for MPSS support. For now the Maximum level at
130 * which you can have a large page is a constant, that may change in
131 * future processors.
133 * The type of "level_t" is signed so that it can be used like:
134 * level_t l;
135 * ...
136 * while (--l >= 0)
137 * ...
139 #define MAX_NUM_LEVEL 4
140 #define MAX_PAGE_LEVEL 2
141 typedef int8_t level_t;
142 #define LEVEL_SHIFT(l) (mmu.level_shift[l])
143 #define LEVEL_SIZE(l) (mmu.level_size[l])
144 #define LEVEL_OFFSET(l) (mmu.level_offset[l])
145 #define LEVEL_MASK(l) (mmu.level_mask[l])
148 * Macros to:
149 * Check for a PFN above 4Gig and 64Gig for 32 bit PAE support
151 #define PFN_4G (4ull * (1024 * 1024 * 1024 / MMU_PAGESIZE))
152 #define PFN_64G (64ull * (1024 * 1024 * 1024 / MMU_PAGESIZE))
153 #define PFN_ABOVE4G(pfn) ((pfn) >= PFN_4G)
154 #define PFN_ABOVE64G(pfn) ((pfn) >= PFN_64G)
157 * The CR3 register holds the physical address of the top level page table.
159 #define MAKECR3(pfn) mmu_ptob(pfn)
162 * HAT/MMU parameters that depend on kernel mode and/or processor type
164 struct htable;
165 struct hat_mmu_info {
166 x86pte_t pt_nx; /* either 0 or PT_NX */
167 x86pte_t pt_global; /* either 0 or PT_GLOBAL */
169 pfn_t highest_pfn;
171 uint_t num_level; /* number of page table levels in use */
172 uint_t max_level; /* just num_level - 1 */
173 uint_t max_page_level; /* maximum level at which we can map a page */
174 uint_t umax_page_level; /* max user page map level */
175 uint_t ptes_per_table; /* # of entries in lower level page tables */
176 uint_t top_level_count; /* # of entries in top most level page table */
178 uint_t hash_cnt; /* cnt of entries in htable_hash_cache */
179 uint_t vlp_hash_cnt; /* cnt of entries in vlp htable_hash_cache */
181 uint_t pae_hat; /* either 0 or 1 */
183 uintptr_t hole_start; /* start of VA hole (or -1 if none) */
184 uintptr_t hole_end; /* end of VA hole (or 0 if none) */
186 struct htable **kmap_htables; /* htables for segmap + 32 bit heap */
187 x86pte_t *kmap_ptes; /* mapping of pagetables that map kmap */
188 uintptr_t kmap_addr; /* start addr of kmap */
189 uintptr_t kmap_eaddr; /* end addr of kmap */
191 uint_t pte_size; /* either 4 or 8 */
192 uint_t pte_size_shift; /* either 2 or 3 */
193 x86pte_t ptp_bits[MAX_NUM_LEVEL]; /* bits set for interior PTP */
194 x86pte_t pte_bits[MAX_NUM_LEVEL]; /* bits set for leaf PTE */
197 * A range of VA used to window pages in the i86pc/vm code.
198 * See PWIN_XXX macros.
200 caddr_t pwin_base;
201 caddr_t pwin_pte_va;
202 paddr_t pwin_pte_pa;
205 * The following tables are equivalent to PAGEXXXXX at different levels
206 * in the page table hierarchy.
208 uint_t level_shift[MAX_NUM_LEVEL]; /* PAGESHIFT for given level */
209 uintptr_t level_size[MAX_NUM_LEVEL]; /* PAGESIZE for given level */
210 uintptr_t level_offset[MAX_NUM_LEVEL]; /* PAGEOFFSET for given level */
211 uintptr_t level_mask[MAX_NUM_LEVEL]; /* PAGEMASK for given level */
215 #if defined(_KERNEL)
218 * Macros to access the HAT's private page windows. They're used for
219 * accessing pagetables, ppcopy() and page_zero().
220 * The 1st two macros are used to get an index for the particular use.
221 * The next three give you:
222 * - the virtual address of the window
223 * - the virtual address of the pte that maps the window
224 * - the physical address of the pte that map the window
226 #define PWIN_TABLE(cpuid) ((cpuid) * 2)
227 #define PWIN_SRC(cpuid) ((cpuid) * 2 + 1) /* for x86pte_copy() */
228 #define PWIN_VA(x) (mmu.pwin_base + ((x) << MMU_PAGESHIFT))
229 #define PWIN_PTE_VA(x) (mmu.pwin_pte_va + ((x) << mmu.pte_size_shift))
230 #define PWIN_PTE_PA(x) (mmu.pwin_pte_pa + ((x) << mmu.pte_size_shift))
233 * The concept of a VA hole exists in AMD64. This might need to be made
234 * model specific eventually.
236 * In the 64 bit kernel PTE loads are atomic, but need atomic_cas_64 on 32
237 * bit kernel.
239 #if defined(__amd64)
241 #ifdef lint
242 #define IN_VA_HOLE(va) (__lintzero)
243 #else
244 #define IN_VA_HOLE(va) (mmu.hole_start <= (va) && (va) < mmu.hole_end)
245 #endif
247 #define FMT_PTE "0x%lx"
248 #define GET_PTE(ptr) (*(x86pte_t *)(ptr))
249 #define SET_PTE(ptr, pte) (*(x86pte_t *)(ptr) = pte)
250 #define CAS_PTE(ptr, x, y) atomic_cas_64(ptr, x, y)
252 #elif defined(__i386)
254 #define IN_VA_HOLE(va) (__lintzero)
256 #define FMT_PTE "0x%llx"
258 /* on 32 bit kernels, 64 bit loads aren't atomic, use get_pte64() */
259 extern x86pte_t get_pte64(x86pte_t *ptr);
260 #define GET_PTE(ptr) (mmu.pae_hat ? get_pte64(ptr) : *(x86pte32_t *)(ptr))
261 #define SET_PTE(ptr, pte) \
262 ((mmu.pae_hat ? ((x86pte32_t *)(ptr))[1] = (pte >> 32) : 0), \
263 *(x86pte32_t *)(ptr) = pte)
264 #define CAS_PTE(ptr, x, y) \
265 (mmu.pae_hat ? atomic_cas_64(ptr, x, y) : \
266 atomic_cas_32((uint32_t *)(ptr), (uint32_t)(x), (uint32_t)(y)))
268 #endif /* __i386 */
271 * Return a pointer to the pte entry at the given index within a page table.
273 #define PT_INDEX_PTR(p, x) \
274 ((x86pte_t *)((uintptr_t)(p) + ((x) << mmu.pte_size_shift)))
277 * Return the physical address of the pte entry at the given index within a
278 * page table.
280 #define PT_INDEX_PHYSADDR(p, x) \
281 ((paddr_t)(p) + ((x) << mmu.pte_size_shift))
284 * From pfn to bytes, careful not to lose bits on PAE.
286 #define pfn_to_pa(pfn) (mmu_ptob((paddr_t)(pfn)))
288 #ifdef __xpv
289 extern pfn_t pte2pfn(x86pte_t, level_t);
290 #endif
292 extern struct hat_mmu_info mmu;
294 #endif /* _KERNEL */
297 #ifdef __cplusplus
299 #endif
301 #endif /* _VM_HAT_PTE_H */