vma-iter: Add support for Android.
[gnulib.git] / lib / memcmp.c
blob6f9c416b56acc81dc724be6b36f0d3176685f630
1 /* Copyright (C) 1991, 1993, 1995, 1997-1998, 2003, 2006, 2009-2019 Free
2 Software Foundation, Inc.
4 Contributed by Torbjorn Granlund (tege@sics.se).
6 NOTE: The canonical source of this file is maintained with the GNU C Library.
7 Bugs can be reported to bug-glibc@prep.ai.mit.edu.
9 This program is free software: you can redistribute it and/or modify it
10 under the terms of the GNU General Public License as published by the
11 Free Software Foundation; either version 3 of the License, or any
12 later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <https://www.gnu.org/licenses/>. */
22 #ifndef _LIBC
23 # include <config.h>
24 #endif
26 #include <string.h>
28 #include <stdint.h>
30 #ifdef _LIBC
32 # undef memcmp
34 # include <memcopy.h>
35 # include <endian.h>
37 # if __BYTE_ORDER == __BIG_ENDIAN
38 # define WORDS_BIGENDIAN
39 # endif
41 #else /* Not in the GNU C library. */
43 # include <sys/types.h>
45 /* Type to use for aligned memory operations.
46 This should normally be the biggest type supported by a single load
47 and store. Must be an unsigned type. */
48 # define op_t unsigned long int
49 # define OPSIZ (sizeof(op_t))
51 /* Threshold value for when to enter the unrolled loops. */
52 # define OP_T_THRES 16
54 /* Type to use for unaligned operations. */
55 typedef unsigned char byte;
57 # ifndef WORDS_BIGENDIAN
58 # define MERGE(w0, sh_1, w1, sh_2) (((w0) >> (sh_1)) | ((w1) << (sh_2)))
59 # else
60 # define MERGE(w0, sh_1, w1, sh_2) (((w0) << (sh_1)) | ((w1) >> (sh_2)))
61 # endif
63 #endif /* In the GNU C library. */
65 #ifdef WORDS_BIGENDIAN
66 # define CMP_LT_OR_GT(a, b) ((a) > (b) ? 1 : -1)
67 #else
68 # define CMP_LT_OR_GT(a, b) memcmp_bytes (a, b)
69 #endif
71 /* BE VERY CAREFUL IF YOU CHANGE THIS CODE! */
73 /* The strategy of this memcmp is:
75 1. Compare bytes until one of the block pointers is aligned.
77 2. Compare using memcmp_common_alignment or
78 memcmp_not_common_alignment, regarding the alignment of the other
79 block after the initial byte operations. The maximum number of
80 full words (of type op_t) are compared in this way.
82 3. Compare the few remaining bytes. */
84 #ifndef WORDS_BIGENDIAN
85 /* memcmp_bytes -- Compare A and B bytewise in the byte order of the machine.
86 A and B are known to be different.
87 This is needed only on little-endian machines. */
89 # ifdef __GNUC__
90 __inline
91 # endif
92 static int
93 memcmp_bytes (op_t a, op_t b)
95 const byte *srcp1 = (const byte *) &a;
96 const byte *srcp2 = (const byte *) &b;
97 op_t a0, b0;
101 a0 = srcp1[0];
102 b0 = srcp2[0];
103 srcp1 += 1;
104 srcp2 += 1;
106 while (a0 == b0);
107 return a0 - b0;
109 #endif
111 /* memcmp_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN 'op_t'
112 objects (not LEN bytes!). Both SRCP1 and SRCP2 should be aligned for
113 memory operations on 'op_t's. */
114 #ifdef __GNUC__
115 __inline
116 #endif
117 static int
118 memcmp_common_alignment (uintptr_t srcp1, uintptr_t srcp2, size_t len)
120 op_t a0, a1;
121 op_t b0, b1;
123 switch (len % 4)
125 default: /* Avoid warning about uninitialized local variables. */
126 case 2:
127 a0 = ((op_t *) srcp1)[0];
128 b0 = ((op_t *) srcp2)[0];
129 srcp1 -= 2 * OPSIZ;
130 srcp2 -= 2 * OPSIZ;
131 len += 2;
132 goto do1;
133 case 3:
134 a1 = ((op_t *) srcp1)[0];
135 b1 = ((op_t *) srcp2)[0];
136 srcp1 -= OPSIZ;
137 srcp2 -= OPSIZ;
138 len += 1;
139 goto do2;
140 case 0:
141 if (OP_T_THRES <= 3 * OPSIZ && len == 0)
142 return 0;
143 a0 = ((op_t *) srcp1)[0];
144 b0 = ((op_t *) srcp2)[0];
145 goto do3;
146 case 1:
147 a1 = ((op_t *) srcp1)[0];
148 b1 = ((op_t *) srcp2)[0];
149 srcp1 += OPSIZ;
150 srcp2 += OPSIZ;
151 len -= 1;
152 if (OP_T_THRES <= 3 * OPSIZ && len == 0)
153 goto do0;
154 /* Fall through. */
159 a0 = ((op_t *) srcp1)[0];
160 b0 = ((op_t *) srcp2)[0];
161 if (a1 != b1)
162 return CMP_LT_OR_GT (a1, b1);
164 do3:
165 a1 = ((op_t *) srcp1)[1];
166 b1 = ((op_t *) srcp2)[1];
167 if (a0 != b0)
168 return CMP_LT_OR_GT (a0, b0);
170 do2:
171 a0 = ((op_t *) srcp1)[2];
172 b0 = ((op_t *) srcp2)[2];
173 if (a1 != b1)
174 return CMP_LT_OR_GT (a1, b1);
176 do1:
177 a1 = ((op_t *) srcp1)[3];
178 b1 = ((op_t *) srcp2)[3];
179 if (a0 != b0)
180 return CMP_LT_OR_GT (a0, b0);
182 srcp1 += 4 * OPSIZ;
183 srcp2 += 4 * OPSIZ;
184 len -= 4;
186 while (len != 0);
188 /* This is the right position for do0. Please don't move
189 it into the loop. */
190 do0:
191 if (a1 != b1)
192 return CMP_LT_OR_GT (a1, b1);
193 return 0;
196 /* memcmp_not_common_alignment -- Compare blocks at SRCP1 and SRCP2 with LEN
197 'op_t' objects (not LEN bytes!). SRCP2 should be aligned for memory
198 operations on 'op_t', but SRCP1 *should be unaligned*. */
199 #ifdef __GNUC__
200 __inline
201 #endif
202 static int
203 memcmp_not_common_alignment (uintptr_t srcp1, uintptr_t srcp2, size_t len)
205 op_t a0, a1, a2, a3;
206 op_t b0, b1, b2, b3;
207 op_t x;
208 int shl, shr;
210 /* Calculate how to shift a word read at the memory operation
211 aligned srcp1 to make it aligned for comparison. */
213 shl = 8 * (srcp1 % OPSIZ);
214 shr = 8 * OPSIZ - shl;
216 /* Make SRCP1 aligned by rounding it down to the beginning of the 'op_t'
217 it points in the middle of. */
218 srcp1 &= -OPSIZ;
220 switch (len % 4)
222 default: /* Avoid warning about uninitialized local variables. */
223 case 2:
224 a1 = ((op_t *) srcp1)[0];
225 a2 = ((op_t *) srcp1)[1];
226 b2 = ((op_t *) srcp2)[0];
227 srcp1 -= 1 * OPSIZ;
228 srcp2 -= 2 * OPSIZ;
229 len += 2;
230 goto do1;
231 case 3:
232 a0 = ((op_t *) srcp1)[0];
233 a1 = ((op_t *) srcp1)[1];
234 b1 = ((op_t *) srcp2)[0];
235 srcp2 -= 1 * OPSIZ;
236 len += 1;
237 goto do2;
238 case 0:
239 if (OP_T_THRES <= 3 * OPSIZ && len == 0)
240 return 0;
241 a3 = ((op_t *) srcp1)[0];
242 a0 = ((op_t *) srcp1)[1];
243 b0 = ((op_t *) srcp2)[0];
244 srcp1 += 1 * OPSIZ;
245 goto do3;
246 case 1:
247 a2 = ((op_t *) srcp1)[0];
248 a3 = ((op_t *) srcp1)[1];
249 b3 = ((op_t *) srcp2)[0];
250 srcp1 += 2 * OPSIZ;
251 srcp2 += 1 * OPSIZ;
252 len -= 1;
253 if (OP_T_THRES <= 3 * OPSIZ && len == 0)
254 goto do0;
255 /* Fall through. */
260 a0 = ((op_t *) srcp1)[0];
261 b0 = ((op_t *) srcp2)[0];
262 x = MERGE (a2, shl, a3, shr);
263 if (x != b3)
264 return CMP_LT_OR_GT (x, b3);
266 do3:
267 a1 = ((op_t *) srcp1)[1];
268 b1 = ((op_t *) srcp2)[1];
269 x = MERGE (a3, shl, a0, shr);
270 if (x != b0)
271 return CMP_LT_OR_GT (x, b0);
273 do2:
274 a2 = ((op_t *) srcp1)[2];
275 b2 = ((op_t *) srcp2)[2];
276 x = MERGE (a0, shl, a1, shr);
277 if (x != b1)
278 return CMP_LT_OR_GT (x, b1);
280 do1:
281 a3 = ((op_t *) srcp1)[3];
282 b3 = ((op_t *) srcp2)[3];
283 x = MERGE (a1, shl, a2, shr);
284 if (x != b2)
285 return CMP_LT_OR_GT (x, b2);
287 srcp1 += 4 * OPSIZ;
288 srcp2 += 4 * OPSIZ;
289 len -= 4;
291 while (len != 0);
293 /* This is the right position for do0. Please don't move
294 it into the loop. */
295 do0:
296 x = MERGE (a2, shl, a3, shr);
297 if (x != b3)
298 return CMP_LT_OR_GT (x, b3);
299 return 0;
303 rpl_memcmp (const void *s1, const void *s2, size_t len)
305 op_t a0;
306 op_t b0;
307 uintptr_t srcp1 = (uintptr_t) s1;
308 uintptr_t srcp2 = (uintptr_t) s2;
309 op_t res;
311 if (len >= OP_T_THRES)
313 /* There are at least some bytes to compare. No need to test
314 for LEN == 0 in this alignment loop. */
315 while (srcp2 % OPSIZ != 0)
317 a0 = ((byte *) srcp1)[0];
318 b0 = ((byte *) srcp2)[0];
319 srcp1 += 1;
320 srcp2 += 1;
321 res = a0 - b0;
322 if (res != 0)
323 return res;
324 len -= 1;
327 /* SRCP2 is now aligned for memory operations on 'op_t'.
328 SRCP1 alignment determines if we can do a simple,
329 aligned compare or need to shuffle bits. */
331 if (srcp1 % OPSIZ == 0)
332 res = memcmp_common_alignment (srcp1, srcp2, len / OPSIZ);
333 else
334 res = memcmp_not_common_alignment (srcp1, srcp2, len / OPSIZ);
335 if (res != 0)
336 return res;
338 /* Number of bytes remaining in the interval [0..OPSIZ-1]. */
339 srcp1 += len & -OPSIZ;
340 srcp2 += len & -OPSIZ;
341 len %= OPSIZ;
344 /* There are just a few bytes to compare. Use byte memory operations. */
345 while (len != 0)
347 a0 = ((byte *) srcp1)[0];
348 b0 = ((byte *) srcp2)[0];
349 srcp1 += 1;
350 srcp2 += 1;
351 res = a0 - b0;
352 if (res != 0)
353 return res;
354 len -= 1;
357 return 0;
360 #ifdef weak_alias
361 # undef bcmp
362 weak_alias (memcmp, bcmp)
363 #endif