distcheck
[findutils.git] / NEWS
blobcef9c6f4e124ffdb2e9946156dea1b8a73e5ee5c
1 GNU findutils NEWS - User visible changes.      -*- outline -*- (allout)
2 * Major changes in release 4.2.9
3 **  Functionality Changes
4 *** xargs no longer treats a line containing only an underscore as a logical end-of-file.   To obtain the behaviour that was previously the default, use "-E_". 
5 *** xargs now supports the POSIX options -E, -I and -L.   These are synonyms 
6     for the existing options -e, -i and -l, but the latter three are
7     now deprecated.
8 **  Bug Fixes
9 *** xargs -n NUM now invokes a command as soon as it has NUM arguments.  
10     Previously, it waited until NUM items had been read, and then
11     invoked the command with NUM arguments, saving the remaining one
12     for next time. 
13 *** If "find -L" discovers a symbolic link loop, an error message is issued.
14 *** If you specify a directory on the find command line, but -prune 
15     is applied to it, find will no longer chdir() into it anyway.
16 **  Documentation improvements
17 *** The precise interpretation of the arguments to the -atime, -ctime 
18     and similar tests in find has been documented more clearly.
20 * Major changes in release 4.2.8
21 *** Bugfix to the findutils 4.2.7 automount handling on Solaris.  This 
22     worked to some extent in findutils-4.2.7, but is much improved in
23     findutils-4.2.8.
25 * Major changes in release 4.2.7
26 **  Functionality Changes
27 *** xargs can now read a list of arguments from a named file, allowing 
28     the invoked program to use the same stdin as xargs started with
29     (for example ``xargs --arg-file=todo emacs'').
30 **  Documentation improvements
31 *** The Texinfo manual now has an extra chapter, "Error Messages".  Most 
32     error messages are self-explanatory, but some of the ones which
33     are not are explained in this chapter.
34 **  Bug Fixes
35 *** Avoid trying to link against -lsun on UNICOS, which doesn't need it or 
36     have it.
37 *** Bugfix to the findutils 4.2.6 automount handling (which hadn't been enabled
38     on Solaris).
39 *** Reenabled internationalisation support (which had been accidentally 
40     disabled in findutils-4.2.5).
42 * Major changes in release 4.2.6
43 **  Bug Fixes
44 *** find now copes rather better when a directory appears to change just as
45     it is about to start examining it, which happens with automount.
46     This is because automount mounts filesystems as you change
47     directory into them.  This should resolve Savannah bugs #3998,
48     #9043.
50 * Major changes in release 4.2.5
51 **  Functionality Changes
52 *** The POSIX options -H and -L are supported.  These control whether or not
53     find will follow symbolic links.
54 *** The BSD option -P is also now supported (though in any case 
55     it is the default).
56 **  Documentation improvements
57 ***  Better documentation for "xargs -i".
58 **  Bug Fixes
59 *** "make install" now respects DESTDIR when generating localstatedir.
60     (this is only relevant if you are installing to some location
61     other than the one that you indictaed when you ran "configure").
62 *** Compatible with automake versions 1.8 and 1.9.
63 *** Build problems on UNICOS now fixed, though the linker will still generate 
64     warnings because we try to link with the nonexistent library
65     "-lsun".  Edit $(LIBS) to work around this problem.
67 * Major changes in release 4.2.4
68 **  Functionality Changes
69 *** If your system sort command has a working "-z" option, updatedb will
70     now correctly handle newline characters in filenames (as will
71     locate).
72 *** xargs now uses 128Kb of command line by default (less if the system 
73     doesn't support that much).
74 *** If you specify a 'find' option after non-option, a warning message 
75     is now issued.  Options should be specified immediately after the 
76     list of paths to search.  These warnings are enabled if you
77     specify the -warn option, or if stdin is a tty.  They are diabled
78     by the use of the -nowarn option.  
79 *** Like find, the locate program now supports an option --null (short form -0)
80     which changes the result separator from newline to NULL.
81 *** Locate supports the option -c (long form --count) which suppresses normal
82     output but prints on stdout the number of results produced (like
83     grep -c).
84 *** Locate supports the option -l (long form --limit) which limits the 
85     number of results.  This is useful if you only want to find out if
86     there are copies of a certain file on the system, but don't want
87     to wait for the entire locate database to be searched.
88 *** Locate now has an option --basename which forces the specified pattern to 
89     be matched against the basename of the entries in the locate
90     database, rather than the whole name.  The default behaviour
91     (matching against the whole name of the file including all the
92     parent directory names) corresponds to the option --wholename.
93 *** updatedb has a new option, --findoptions, that can be used to 
94     pass extra options through to the find command that it uses.
95 **  Bug Fixes
96 *** "find -printf '%H\n'" now works (rather than segfaulting) on
97     systems that have non-writable string constants.
98 *** Better POSIX compliance for the -s option to xargs (out of range 
99     values should just result in bounding to the correct range, not an
100     error, so now we just print a warning message and adjust the
101     value).
102 *** Corrected section numbers of manual page cross-references
104 * Major changes in release 4.2.3
105 **  Functionality Changes
106 *** Added new action -delete which deletes things that find matches.
107 *** Added new action -quit which causes find to exit immediately.
108 *** A new format directive '%D' for "find -printf" prints the device number.
109 *** The -ls predicate no longer truncates user or group names.
110 *** Added new option "-d" which is a synonym for "-depth" for compatibility
111     with Mac OS, OpenBSD and FreeBSD.  This option is already
112     deprecated since the POSIX standard specifies "-depth".   
113 *** Added two new format specifiers to the -printf action; these are 
114     %y and %Y.  They indicate the type of the file as a single letter;
115     these are the same latters as are used by the "-type" test.
116 *** If a parent directory changes during the execution of find, 
117     the error message we issue identifies the nature of the change
118     (for example the previous and current inode numbers of the 
119     directory we've just returned out of).
120 ** Other Changes
121 *** Non-functional code changes to silence compiler warnings.
123 * Major changes in release 4.2.2
124 **  Documentation improvements
125 *** "find ... -exec {}+" is not yet supported.
126 ** Bug Fixes
127 *** Fixed compilation problems on Solaris, RedHat EL AS 2.1, Irix, AIX
128 *** Work around possible compiler bug on HP-UX 11.23 for ia64
129 *** The built-in internationalisation support now works again.
130 ** Other Changes
131 *** We now import the gnulib source in the way it is intended to be used,
132     which means among other things that we only have one config.h file
133     now.
134 *** Functions which findutils requires but which are not present in 
135     gnulib are now defined in "libfind.a".  This is in the lib
136     directory, while gnulib is in the gnulib subdirectory.
137 *** Fixed a typo in the address of the FSF in many of the file headers.
139 * Major changes in release 4.2.1
140 ** Bug Fixes
141 *** 'find -name \*bar now matches .foobar, because the POSIX standard 
142      requires it, as explained at
143      http://standards.ieee.org/reading/ieee/interp/1003-2-92_int/pasc-1003.2-126.html
145 * Major changes in release 4.2.1
146 ** Bug Fixes
147 *** find -iname now works correctly on systems that have an fnmatch() function 
148     that does not support FNM_CASEFOLD
149 *** updatedb now uses signal names for "trap" instead of numbers, 
150     as per bug #9465 (see http://www.opengroup.org/onlinepubs/009695399/utilities/trap.html)
151 *** Better support for systems lacking intmax_t
152 ** Other Changes
153 **** findutils now uses a newer version of gnulib (dated 2004-10-17).
155 * Major changes in release 4.2.0
156 ** Functionality Changes
157 *** xargs now works better when the environment variables are very extensive.
158     The xargs command used to run into difficulties if the environment 
159     data contained more than 20480 bytes.
160 *** New options -wholename and -iwholename 
161     As per the GNU Projecvt coding standard, These are preferred over 
162     the -path and -ipath options.  Using -ipath now generates a warning,
163     though -path does not (since HPUX also offers -path).   
164 *** The environment variable FIND_BLOCK_SIZE is now ignored.
165 *** New option "-ignore_readdir_race"
166     silences an error messages which would otherwise occur if a file is removed
167     after find has read it from the directory using readdir(), but before 
168     find stats the file.  There is also an option
169     -noignore_readdir_race which has the opposite effect.   
170 **  Documentation improvements
171 *** The -size option of find is now documented in more detail
172 *** POSIX compliance and GNU extensions
173     The find manual page also now includes a section 
174     which describes the relationship between the features of GNU 
175     find and the POSIX standard.  Some other small improvements 
176     to the find and xargs manual pages have been made.
177 *** The argument to the -fprintf directive is now better documented.
178     The escape code '\0' for the `-printf' predicate of find is now
179     documented, and the documentation for the %k and %b specifiers
180     has been improved.  
181 *** xargs -i is now more clearly documented.
182 ** Bug Fixes
183 *** locate 'pa*d' will now find /etc/passwd (if it exists, of course)
184 *** xargs standard input is not inherited by child processes
185     If the command invoked by xargs reads from its standard input, 
186     it now gets nothing, as opposed to stealing data from the 
187     list of files that xargs is trying to read.
188 *** Better support for 64-bit systems.
189 *** The command "xargs -i -n1" now works as one might expect, 
190     I think this is a strange thing to want to do.  
191 *** Arguments to find -mtime that are too large are now diagnosed 
192     Previously, this just used to cause find just to do the wrong thing.
193 *** updatedb is now somewhat more robust
194     The updatedb shell script now does not generate an empty 
195     database if it fails.  
196 *** Sanity-check on some data read from locatedb
197     Locate now detects some types of file corruption in the 
198     locate database.
199 *** The %k format specifier for -fprintf now works
200     This was broken in 4.1.20.
202 * Major changes in release 4.1.20:
203 ** New maintainer, James Youngman <jay@gnu.org>
204 ** As far as I know, this is the first release after 4.1.7, but I've left 
205    a gap just in case. 
206 ** We now use an "imported" version of gnulib, rather than including 
207    a copy of the gnulib code in our CVS repository.   There are no
208    differences in the build instructions, though (unless you are 
209    building directly from CVS, in which case please read the file
210    README-CVS).
211 ** There are no (deliberate) functional changes in version 4.1.20.
213 * Major changes in release 4.1.7:
214 fix problem so that default "-print" is added when "-prune" is used.
215 security fixes related to directories changing while find is executing.
217 * Major changes in release 4.1.6:
218 correct bug in prune.
219 added --ignore-case option for locate
221 * Major changes in release 4.1.5:
222 Add support for large files
224 * Major changes in release 4.1.4:
225 bug fixes, more up-to-date languages.
227 * Major changes in release 4.1.3:
228 added internationalization and localization.
230 * Major changes in release 4.1.1:
231 attempt at successful compilation on many platforms after years of neglect
232  "--existing" option added to locate "--prunefs" option added to updatedb
234 * Major changes in release 4.1:
236 ** Distribution renamed to findutils.
237 ** updatedb is now a user command, installed in $exec_prefix/bin
238   instead of $exec_prefix/libexec.
239 ** A few problems in Makefiles and testsuite corrected.
241 * Major changes in release 4.0:
243 ** Documentation:
244 *** Texinfo manual.
245 *** Man page for updatedb.
246 *** Man page for the locate database formats.
248 ** find:
249 *** Takes less CPU time on long paths, because it uses chdir to descend
250    trees, so it does fewer inode lookups.
251 *** Does not get trapped in symbolic link loops when -follow is given.
252 *** Supports "-fstype afs" if you have /afs and /usr/afsws/include
253    and you configure using the --with-afs option.
254 *** New action -fls FILE; like -ls but writes to FILE.
256 ** locate:
257 *** Supports a new database format, which is 8-bit clean and
258    allows machines with different byte orderings and integer sizes to
259    share the databases.  The new locate can also detect and read the
260    old database format automatically.  The new databases are typically
261    30% or more larger than the old ones (due to allowing all 8 bits in
262    file names).  Search times are approximately the same, or faster on
263    some systems.
264 *** Warns if a file name database is more than 8 days old.
266 ** updatedb:
267 *** Takes command-line options.
269 ** xargs:
270 *** Performance improved 10-20%.
271 *** The EOF string is not used when -0 is given.
272 *** Now has a test suite.  Some minor bugs fixed as a result.
274 * Major changes in release 3.8:
276 ** case insensitive versions of -lname, -name, -path, -regex:
277   -ilname, -iname, -ipath, -iregex
278 ** %F directive for -printf, -fprintf to print file system type
280 * Major changes in release 3.7:
282 ** locate can search multiple databases
283 ** locate has an option to specify the database path
284 ** updatedb no longer goes into an infinite loop with some versions of tail
286                         --//--
287 This is used by Emacs' spell checker ispell.el:
289 LocalWords: ansi knr strftime xargs updatedb sh fnmatch hin strcpy
290 LocalWords: lib getstr getline frcode bigram texi depcomp automake
291 LocalWords: strncasecmp strcasecmp LIBOBJS FUNC prunefs allout libexec
292 LocalWords: testsuite Texinfo chdir inode fstype afs fls ls EOF lname
293 LocalWords: regex ilname iname ipath iregex printf fprintf