1 GNU findutils NEWS - User visible changes. -*- outline -*- (allout)
2 * Major changes in release 4.2.26
4 ** Public Service Announcements
6 I'd like to point out a second time that the interpretation of '-perm
7 +mode' has changed to be more POSIX-compliant. If you want the old
8 behaviour of the GNU extension you should use '-perm /mode'. See the
9 NEWS entry for findutils version 4.2.21 for details.
13 The xargs command now supports a new option (--delimiter) which allows
14 input items to be separated by characters other than null and
15 whitespace. This resolves Savannah support request sr #102914.
17 Sometimes find needs to read the /etc/mtab file (or perform the
18 equivalent operation on systems not using /etc/mtab). If this
19 information is needed butnot available, find now exits with an error
20 message non-zero status. If the information is not needed, find will
23 A new xargs option --delimiter allows the input delimiter to be
24 changed (previously \0 was the only choice unless you use the -L
25 option, which changes other semantics too).
29 If the environment size is too large to allow xargs to operate
30 normally, 'xargs --help' still works (now).
32 If the input to xargs is a large number of very short options (for
33 example, one character each), earlier versions of xargs would fail
34 with 'Argument list too long'. However, since this is precisely the
35 problem that xargs was invented to solve, this is a bug. Hence on
36 those systems we now correctly use a shorter command line. This
37 problem particularly affected 64-bit Linux systems because of the
38 larger size of pointers, although 32-bit Linux systems were also
39 affected (albeit for longer command lines). In theory the same
40 problem could affect 'find -exec {} +', but that's much less likely
41 (even so, the bug is fixed there too).
44 ** Documentation Changes
46 The EXAMPLES section of the find manual page now correctly describes
47 the symbolic and octal modes for the -perm test.
49 The documentation and "--help" usage information for the -L, -l, -I
50 and -i options have been clarified (but the behaviour has not changed).
52 The documentation now explains more clearly what happens when you use
55 * Major changes in release 4.2.25
59 find -perm /440 (which should succeed if a file is readable by its
60 owner or group) now works. Previously there was a bug which caused
61 this to be treated as "find -perm 440".
63 Some files in the xargs test suite have been renamed to avoid problems
64 on operating systems whoch cannot distinguish filenames on the basis
65 of upper/lower case distinctions.
67 The software now builds on Cygwin, including the generated file
70 Findutils should now build once again on systems supporting AFS, but
71 this support has not recently been fully tested. Findutils should
72 also (once again) build on Cygwin.
76 The test suite for find is now much more extensive.
78 * Major changes in release 4.2.24
80 ** Documentation Changes
82 The manual now includes a "Worked Examples" section which talks about
83 the various ways in which findutils can be used to perform common
84 tasks, and why some of these alternatives are better than others.
86 The -I option of xargs (which is required by the POSIX standard) is
89 We now document the fact that find ensures that commands run by -ok
90 and -okdir don't steal find's input. Find does this by redirecting
91 the command's standard input from stdin.
93 Many documentation readability enhancements and proofreading fixes
94 were contributed by Aaron Hawley.
98 *** Functional changes in locate
100 The "--regex" option of locate now assumes the regular expression to
101 be in the same syntax as is used in GNU Emacs, though this can be
102 changed with the new option --regextype. This is a change from the
103 existing behaviour (which was to use POSIX Basic Regular Expressions).
104 Since this feature is releatively new anyway, I though it was more
105 useful to have compatibility between regular expression handling in
106 find and locate than to maintain the short-lived previous behaviour of
109 The locate program now also supports a "--regextype" long option which
110 controls which regular expression syntax is understood by locate.
111 This is a long option and has no single-letter 'short option'
114 *** Functional changes in find
116 The regular expression syntax understood by "find" can be changed with
117 the -regextype option; this option is positional, meaning that you can
118 have several tests, each using a distinct syntax (this is not
119 recommended practice however).
121 The default regular expression syntax is substantially the same as
122 that recognised by GNU Emacs, except for the fact that "." will match
125 The leaf optimisation can be disabled with the configure option
126 "--disable-leaf-optimisation", which is equivalent to specifying
127 "-noleaf" on all find command lines. This is useful for systems
128 having filesystems which do not provide traditional Unix behaviour for
129 the link count on directories (for example Cygwin and the Solaris 9
130 HSFS implementation).
134 *** Bug Fixes for find
136 The -iregex test now works once again on systems that lack
137 re_search() (that is, systems on which findutils needs to use the
138 gnulib version of this function).
140 find -regex now once again uses GNU Emacs-compatible regular
143 If invoked with stderr closed, the -fprint and -fprintf actions now no
144 longer cause error messages to be sent into the output file.
146 If the link count of a directory is less that two, the leaf
147 optimisation is now disabled for that directory. This should allow
148 searching of non-Unix filesystems to be more reliable on systems that
149 don't take the trouble to make their filesystems look like traditional
150 Unix filesystems. Some filesystems don't even take the trouble to
151 have a link count of less than two and for these, -noleaf is still
152 required unless --disable-leaf-optimisation was used at configure time.
154 The "%Y" directive for the -printf action now no longer changes find's
155 idea of the mode of the file, so this means among other things that
156 "-printf %Y %y" now works properly. This is Savannah bug #13973.
158 * Major changes in release 4.2.23
160 ** Documentation Changes
162 The -L and -I options of xargs are currently incompatible (but should
165 Improved the documentation for -execdir and -okdir.
167 ** Functional Changes to updatedb
169 File names ending in "/" which are specified as an argument to
170 --prunepaths (or in $PRUNEPATHS) don't work, so we now issue an error
171 message if the user tries to do that. The obvious exception of course
172 is "/" which does work and is not rejected.
175 * Major changes in release 4.2.22
179 If a directory entry searched with "find -L" is a symbolic link to
180 ".", we no longer loop indefinitely. This problem affected find
181 versions 4.2.19, 4.2.20 and 4.2.21. This problem allows users to make
182 "find" loop indefinitely. This is in effect a denial of service and
183 could be used to prevent updates to the locate database or to defeat
184 file security checks based on find. However, it should be noted that
185 you should not use "find -L" in security-sensitive scenarios.
189 None in this release.
191 ** Functional Changes to locate
193 A locate database can now be supplied on stdin, using '-' as a element
194 of the database-path. If more than one database-path element is '-',
195 later instances are ignored.
197 A new option to locate, '--all' ('-A') causes matches to be limited to
198 entries which match all given patterns, not entries which match
199 one or more patterns.
201 ** Documentation Changes
203 Some typos in the manual pages have been fixed. Various parts of the
204 manual now point out that it is good practice to quote the argument of
205 "-name". The manpage now has a "NON-BUGS" section which explains some
206 symptoms that look like bugs but aren't. The explanations of the "%k"
207 and "%b" directives to "find -printf" have been imrpoved.
210 * Major changes in release 4.2.21
211 ** Functional Changes to find
213 The GNU extension "find ... -perm +MODE" has been withdrawn because it
214 is incompatible with POSIX in obscure cases like "find ... -perm ++r".
215 Use the new syntax "find ... -perm /MODE" instead. Old usages will
216 still continue to work, so long as they don't conflict with POSIX.
218 If the output is going to a terminal, the -print, -fprint, -printf and
219 -fprintf actions now quote "unusual" characters to prevent unwanted
220 effects on the terminal. See "Unusual Characters in File Names" for
221 further details. There is no change to the behaviour when the output
222 is not going to a terminal. The locate program does the same thing,
223 unless the -0 option is in effect (in which case the filenames are
226 ** Functional Changes to locate
228 The locate command will now read each locate database at most once.
229 This means that if you are using multiple databases and are searching
230 for more than one name, the results will now be printed in a different
231 order (and if you specified a small limit with --limit, you may get a
232 different set of results).
234 A new option '--print' for locate causes it to print the matching
235 results even if the '--count' or '--statistics' option is in effect.
238 find /blah/blah/blah -depth -empty now works once again.
240 The -regex and -iregex tests of find now correctly accept POSIX Basic
241 Regular Expressions. (Savannah bug #12999)
243 The updatedb program now works on systems where "su" does not support
244 the "-s" option, for example Solaris.
246 * Major changes in release 4.2.20
247 ** Internationalization and Localization
248 Updated Vietnamese and Dutch translations.
251 Minor bugfix affecting only those who compile from the CVS repository,
252 as opposed to those who compile from the source releases.
254 * Major changes in release 4.2.19
257 find should now no longer hang on systems which lack the O_NOFOLLOW
258 flag to open(2) and which are clients of an unresponsive NFS server
259 (Savannah bug #12044).
261 We now avoid inappropriately failing for "find -L foo" or "find -H
262 foo" if foo is a symbolic link (Savannah bug #12181). Previously we
263 used to fail with the error message "Too many levels of symbolic
266 "find . -false -exec foo {} +" no longer runs an extra instance of foo
267 when find exits (Savannah bug #12230).
269 If the chdir() safety check fails but we can no longer get back to
270 where we started, exit with an explanatory (fatal) error message.
271 This does not happen on GNU/Linux and FreeBSD because the safety check
272 is not needed (the security problem the safety check protects against
273 is prevented in a cleaner way on those systems).
275 "make distclean" no longer deletes regex.c (which "make all" needs).
277 ** Functionality Changes
278 "find -printf "%h\n" will now print "." for files in the current directory.
279 Previously it printed nothing (but there was a bug in the %h
280 implementation anyway). This fixes Savannah bug #12085.
282 Should now build (again) on non-C99-compliant systems.
284 ** Documentation enhancements
285 Fixed some typos and clarified wording in "Working with automounters".
287 ** Internationalization and Localization
288 New Vietnamese message translation.
290 * Major changes in release 4.2.18
292 *** "find -depth" was missing out non-leaf directories when they contain
293 non-directories. This affected findutils releases 4.2.15,
294 4.2.16 and 4.2.17, but the bug is now fixed.
295 *** Find no longer hangs on systems which are clients of unresponsive
297 ** Documentation improvements
298 *** Improvements and corrections to the find.1 manpage, including corrections to the descriptions of -H and -L.
300 * Major changes in release 4.2.17
302 *** bug #11861 undefined symbol "basename" on IRIX 5.3
303 *** bug #11865 xargs -i regression (as compared to findutils-4.2.12)
304 *** bug #11866 Typo in pred_okdir renders it useless (affecting 4.2.16 only)
305 *** patch #3723 fix recent process_top_path change (for -execdir on /)
306 *** Fixing bug #11866 and applying patch #3723 made -execdir work much better.
307 *** find bar/baz/ugh now works again if baz is a symbolic link (broken
310 * Major changes in release 4.2.16
311 ** Functionality Changes
312 *** Updated the message catalogues for the translated messages.
313 *** The subfs filesystem is now treated the same as the autofs
315 *** New translations: Belarusian, Catalan, Greek, Esperanto,
316 Finnish, Irish, Croatian, Hungarian, Japanese, Luganda,
317 Malay, Romanian, Slovenian, Serbian, Chinese (simplified).
320 *** The -execdir action now works correctly for files named on the
323 * Major changes in release 4.2.15
324 ** Functionality Changes
325 *** locate now supports matching regular expression (--regex).
326 *** --enable-d_type-optimization (introduced in findutils 4.2.13) is now turned on by default.
328 * Major changes in release 4.2.14
329 ** Functionality Changes
330 *** New options -L, -P, -H for locate. The work in the same was as the same options for find.
332 *** Don't include the "findutils/find/testsuite/find.gnu" subdirectory in the
333 distributed tar file more than once.
334 *** Should now build on Solaris once again.
335 *** -xtype and -printf %Y now work correctly for symbolic links once again
336 ** Documentation improvements
337 *** All options for "locate" are now documented
339 * Major changes in release 4.2.13
340 ** Performance Enhancements
341 *** On Linux and some other systems, a large performance improvement,
342 because we can eliminate many of the calls to lstat() (in extreme
343 cases, 99% of them). Limited testing shows a 2x speedup on NFS
344 filesystems. Other systems which can make use of this enhancement
345 include Mac OS X and *BSD.
347 * Major changes in release 4.2.12
348 ** Functionality Changes
349 *** find is now POSIX-compliant, as far as I know.
350 *** -exec ... {} + now works.
351 *** New actions -execdir and -okdir which are like -exec and -ok but more secure.
352 *** "locate -w" is now a synonym for "locate --wholepath".
353 *** An empty path entry in the locate database path (for example "::" in
354 $LOCATE_PATH or in the argument to "locate -d") is taken to mean
355 the default database, whose name is hard-coded in locate.
357 *** If find or xargs cannot write to stdout, for example because
358 output is redirected to a file and the disk is full, the
359 relevant program will return a non-zero exit status.
361 * Major changes in release 4.2.11
363 *** Compilation fix for systems without EOVERFLOW.
364 *** More helpful error message if you make a mistake with (, ), -o or -a.
365 ** Functionality Changes
366 *** If you have unclosed parentheses on the find command line,
367 or any of a number of similar problems, find will now produce
368 a more helpful error message.
369 *** locate -b is now a synonym for locate --basename
370 *** locate now supports a --statistics (or -S) option, which prints some
371 statistics about the locate databases.
372 *** Implemented the -samefile option.
373 ** Documentation improvements
374 *** New chapter in the manual, "Security Considerations".
375 *** Better documentation for -prune (Mainly thanks to Stepan Kasal)
377 *** locate's options -i and -w now work with the -e option (previously a bug
380 * Major changes in release 4.2.10
382 *** Portability fix for fstype.c: should now compile on UNICOS, and possibly
383 also produce useful results on BeOS and Dolphin, perhaps other
386 * Major changes in release 4.2.9
387 ** Functionality Changes
388 *** xargs no longer treats a line containing only an underscore as a logical end-of-file. To obtain the behaviour that was previously the default, use "-E_".
389 *** xargs now supports the POSIX options -E, -I and -L. These are synonyms
390 for the existing options -e, -i and -l, but the latter three are
393 *** xargs -n NUM now invokes a command as soon as it has NUM arguments.
394 Previously, it waited until NUM+1 items had been read, and then
395 invoked the command with NUM arguments, saving the remaining one
397 *** If "find -L" discovers a symbolic link loop, an error message is issued.
398 *** If you specify a directory on the find command line, but -prune
399 is applied to it, find will no longer chdir() into it anyway.
400 ** Documentation improvements
401 *** The precise interpretation of the arguments to the -atime, -ctime
402 and similar tests in find has been documented more clearly.
404 * Major changes in release 4.2.8
405 *** Bugfix to the findutils 4.2.7 automount handling on Solaris. This
406 worked to some extent in findutils-4.2.7, but is much improved in
409 * Major changes in release 4.2.7
410 ** Functionality Changes
411 *** xargs can now read a list of arguments from a named file, allowing
412 the invoked program to use the same stdin as xargs started with
413 (for example ``xargs --arg-file=todo emacs'').
414 ** Documentation improvements
415 *** The Texinfo manual now has an extra chapter, "Error Messages". Most
416 error messages are self-explanatory, but some of the ones which
417 are not are explained in this chapter.
419 *** Avoid trying to link against -lsun on UNICOS, which doesn't need it or
421 *** Bugfix to the findutils 4.2.6 automount handling (which hadn't been enabled
423 *** Reenabled internationalisation support (which had been accidentally
424 disabled in findutils-4.2.5).
426 * Major changes in release 4.2.6
428 *** find now copes rather better when a directory appears to change just as
429 it is about to start examining it, which happens with automount.
430 This is because automount mounts filesystems as you change
431 directory into them. This should resolve Savannah bugs #3998,
434 * Major changes in release 4.2.5
435 ** Functionality Changes
436 *** The POSIX options -H and -L are supported. These control whether or not
437 find will follow symbolic links.
438 *** The BSD option -P is also now supported (though in any case
440 ** Documentation improvements
441 *** Better documentation for "xargs -i".
443 *** "make install" now respects DESTDIR when generating localstatedir.
444 (this is only relevant if you are installing to some location
445 other than the one that you indictaed when you ran "configure").
446 *** Compatible with automake versions 1.8 and 1.9.
447 *** Build problems on UNICOS now fixed, though the linker will still generate
448 warnings because we try to link with the nonexistent library
449 "-lsun". Edit $(LIBS) to work around this problem.
451 * Major changes in release 4.2.4
452 ** Functionality Changes
453 *** If your system sort command has a working "-z" option, updatedb will
454 now correctly handle newline characters in filenames (as will
456 *** xargs now uses 128Kb of command line by default (less if the system
457 doesn't support that much).
458 *** If you specify a 'find' option after non-option, a warning message
459 is now issued. Options should be specified immediately after the
460 list of paths to search. These warnings are enabled if you
461 specify the -warn option, or if stdin is a tty. They are diabled
462 by the use of the -nowarn option.
463 *** Like find, the locate program now supports an option --null (short form -0)
464 which changes the result separator from newline to NULL.
465 *** Locate supports the option -c (long form --count) which suppresses normal
466 output but prints on stdout the number of results produced (like
468 *** Locate supports the option -l (long form --limit) which limits the
469 number of results. This is useful if you only want to find out if
470 there are copies of a certain file on the system, but don't want
471 to wait for the entire locate database to be searched.
472 *** Locate now has an option --basename which forces the specified pattern to
473 be matched against the basename of the entries in the locate
474 database, rather than the whole name. The default behaviour
475 (matching against the whole name of the file including all the
476 parent directory names) corresponds to the option --wholename.
477 *** updatedb has a new option, --findoptions, that can be used to
478 pass extra options through to the find command that it uses.
480 *** "find -printf '%H\n'" now works (rather than segfaulting) on
481 systems that have non-writable string constants.
482 *** Better POSIX compliance for the -s option to xargs (out of range
483 values should just result in bounding to the correct range, not an
484 error, so now we just print a warning message and adjust the
486 *** Corrected section numbers of manual page cross-references
488 * Major changes in release 4.2.3
489 ** Functionality Changes
490 *** Added new action -delete which deletes things that find matches.
491 *** Added new action -quit which causes find to exit immediately.
492 *** A new format directive '%D' for "find -printf" prints the device number.
493 *** The -ls predicate no longer truncates user or group names.
494 *** Added new option "-d" which is a synonym for "-depth" for compatibility
495 with Mac OS, OpenBSD and FreeBSD. This option is already
496 deprecated since the POSIX standard specifies "-depth".
497 *** Added two new format specifiers to the -printf action; these are
498 %y and %Y. They indicate the type of the file as a single letter;
499 these are the same latters as are used by the "-type" test.
500 *** If a parent directory changes during the execution of find,
501 the error message we issue identifies the nature of the change
502 (for example the previous and current inode numbers of the
503 directory we've just returned out of).
505 *** Non-functional code changes to silence compiler warnings.
507 * Major changes in release 4.2.2
508 ** Documentation improvements
509 *** "find ... -exec {}+" is not yet supported.
511 *** Fixed compilation problems on Solaris, RedHat EL AS 2.1, Irix, AIX
512 *** Work around possible compiler bug on HP-UX 11.23 for ia64
513 *** The built-in internationalisation support now works again.
515 *** We now import the gnulib source in the way it is intended to be used,
516 which means among other things that we only have one config.h file
518 *** Functions which findutils requires but which are not present in
519 gnulib are now defined in "libfind.a". This is in the lib
520 directory, while gnulib is in the gnulib subdirectory.
521 *** Fixed a typo in the address of the FSF in many of the file headers.
523 * Major changes in release 4.2.1
525 *** 'find -name \*bar now matches .foobar, because the POSIX standard
526 requires it, as explained at
527 http://standards.ieee.org/reading/ieee/interp/1003-2-92_int/pasc-1003.2-126.html
529 * Major changes in release 4.2.1
531 *** find -iname now works correctly on systems that have an fnmatch() function
532 that does not support FNM_CASEFOLD
533 *** updatedb now uses signal names for "trap" instead of numbers,
534 as per bug #9465 (see http://www.opengroup.org/onlinepubs/009695399/utilities/trap.html)
535 *** Better support for systems lacking intmax_t
537 **** findutils now uses a newer version of gnulib (dated 2004-10-17).
539 * Major changes in release 4.2.0
540 ** Functionality Changes
541 *** xargs now works better when the environment variables are very extensive.
542 The xargs command used to run into difficulties if the environment
543 data contained more than 20480 bytes.
544 *** New options -wholename and -iwholename
545 As per the GNU Projecvt coding standard, These are preferred over
546 the -path and -ipath options. Using -ipath now generates a warning,
547 though -path does not (since HPUX also offers -path).
548 *** The environment variable FIND_BLOCK_SIZE is now ignored.
549 *** New option "-ignore_readdir_race"
550 silences an error messages which would otherwise occur if a file is removed
551 after find has read it from the directory using readdir(), but before
552 find stats the file. There is also an option
553 -noignore_readdir_race which has the opposite effect.
554 ** Documentation improvements
555 *** The -size option of find is now documented in more detail
556 *** POSIX compliance and GNU extensions
557 The find manual page also now includes a section
558 which describes the relationship between the features of GNU
559 find and the POSIX standard. Some other small improvements
560 to the find and xargs manual pages have been made.
561 *** The argument to the -fprintf directive is now better documented.
562 The escape code '\0' for the `-printf' predicate of find is now
563 documented, and the documentation for the %k and %b specifiers
565 *** xargs -i is now more clearly documented.
567 *** locate 'pa*d' will now find /etc/passwd (if it exists, of course)
568 *** xargs standard input is not inherited by child processes
569 If the command invoked by xargs reads from its standard input,
570 it now gets nothing, as opposed to stealing data from the
571 list of files that xargs is trying to read.
572 *** Better support for 64-bit systems.
573 *** The command "xargs -i -n1" now works as one might expect,
574 I think this is a strange thing to want to do.
575 *** Arguments to find -mtime that are too large are now diagnosed
576 Previously, this just used to cause find just to do the wrong thing.
577 *** updatedb is now somewhat more robust
578 The updatedb shell script now does not generate an empty
579 database if it fails.
580 *** Sanity-check on some data read from locatedb
581 Locate now detects some types of file corruption in the
583 *** The %k format specifier for -fprintf now works
584 This was broken in 4.1.20.
586 * Major changes in release 4.1.20:
587 ** New maintainer, James Youngman <jay@gnu.org>
588 ** As far as I know, this is the first release after 4.1.7, but I've left
590 ** We now use an "imported" version of gnulib, rather than including
591 a copy of the gnulib code in our CVS repository. There are no
592 differences in the build instructions, though (unless you are
593 building directly from CVS, in which case please read the file
595 ** There are no (deliberate) functional changes in version 4.1.20.
597 * Major changes in release 4.1.7:
598 fix problem so that default "-print" is added when "-prune" is used.
599 security fixes related to directories changing while find is executing.
601 * Major changes in release 4.1.6:
602 correct bug in prune.
603 added --ignore-case option for locate
605 * Major changes in release 4.1.5:
606 Add support for large files
608 * Major changes in release 4.1.4:
609 bug fixes, more up-to-date languages.
611 * Major changes in release 4.1.3:
612 added internationalization and localization.
614 * Major changes in release 4.1.1:
615 attempt at successful compilation on many platforms after years of neglect
616 "--existing" option added to locate "--prunefs" option added to updatedb
618 * Major changes in release 4.1:
620 ** Distribution renamed to findutils.
621 ** updatedb is now a user command, installed in $exec_prefix/bin
622 instead of $exec_prefix/libexec.
623 ** A few problems in Makefiles and testsuite corrected.
625 * Major changes in release 4.0:
629 *** Man page for updatedb.
630 *** Man page for the locate database formats.
633 *** Takes less CPU time on long paths, because it uses chdir to descend
634 trees, so it does fewer inode lookups.
635 *** Does not get trapped in symbolic link loops when -follow is given.
636 *** Supports "-fstype afs" if you have /afs and /usr/afsws/include
637 and you configure using the --with-afs option.
638 *** New action -fls FILE; like -ls but writes to FILE.
641 *** Supports a new database format, which is 8-bit clean and
642 allows machines with different byte orderings and integer sizes to
643 share the databases. The new locate can also detect and read the
644 old database format automatically. The new databases are typically
645 30% or more larger than the old ones (due to allowing all 8 bits in
646 file names). Search times are approximately the same, or faster on
648 *** Warns if a file name database is more than 8 days old.
651 *** Takes command-line options.
654 *** Performance improved 10-20%.
655 *** The EOF string is not used when -0 is given.
656 *** Now has a test suite. Some minor bugs fixed as a result.
658 * Major changes in release 3.8:
660 ** case insensitive versions of -lname, -name, -path, -regex:
661 -ilname, -iname, -ipath, -iregex
662 ** %F directive for -printf, -fprintf to print file system type
664 * Major changes in release 3.7:
666 ** locate can search multiple databases
667 ** locate has an option to specify the database path
668 ** updatedb no longer goes into an infinite loop with some versions of tail
671 This is used by Emacs' spell checker ispell.el:
673 LocalWords: ansi knr strftime xargs updatedb sh fnmatch hin strcpy
674 LocalWords: lib getstr getline frcode bigram texi depcomp automake
675 LocalWords: strncasecmp strcasecmp LIBOBJS FUNC prunefs allout libexec
676 LocalWords: testsuite Texinfo chdir inode fstype afs fls ls EOF lname
677 LocalWords: regex ilname iname ipath iregex printf fprintf