1 /* $FreeBSD: src/sys/netinet6/ip6_output.c,v 1.13.2.18 2003/01/24 05:11:35 sam Exp $ */
2 /* $KAME: ip6_output.c,v 1.279 2002/01/26 06:12:30 jinmei Exp $ */
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * Copyright (c) 1982, 1986, 1988, 1990, 1993
35 * The Regents of the University of California. All rights reserved.
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 4. Neither the name of the University nor the names of its contributors
46 * may be used to endorse or promote products derived from this software
47 * without specific prior written permission.
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
61 * @(#)ip_output.c 8.3 (Berkeley) 1/21/94
64 #include "opt_ip6fw.h"
66 #include "opt_inet6.h"
67 #include "opt_ipsec.h"
69 #include <sys/param.h>
70 #include <sys/malloc.h>
72 #include <sys/errno.h>
73 #include <sys/protosw.h>
74 #include <sys/socket.h>
75 #include <sys/socketvar.h>
76 #include <sys/systm.h>
77 #include <sys/kernel.h>
81 #include <sys/thread2.h>
82 #include <sys/msgport2.h>
85 #include <net/route.h>
88 #include <netinet/in.h>
89 #include <netinet/in_var.h>
90 #include <netinet6/in6_var.h>
91 #include <netinet/ip6.h>
92 #include <netinet/icmp6.h>
93 #include <netinet6/ip6_var.h>
94 #include <netinet/in_pcb.h>
95 #include <netinet6/nd6.h>
96 #include <netinet6/ip6protosw.h>
99 #include <netinet6/ipsec.h>
101 #include <netinet6/ipsec6.h>
103 #include <netproto/key/key.h>
107 #include <netproto/ipsec/ipsec.h>
108 #include <netproto/ipsec/ipsec6.h>
109 #include <netproto/ipsec/key.h>
112 #include <net/ip6fw/ip6_fw.h>
114 #include <net/net_osdep.h>
116 static MALLOC_DEFINE(M_IPMOPTS
, "ip6_moptions", "internet multicast options");
119 struct mbuf
*ip6e_ip6
;
120 struct mbuf
*ip6e_hbh
;
121 struct mbuf
*ip6e_dest1
;
122 struct mbuf
*ip6e_rthdr
;
123 struct mbuf
*ip6e_dest2
;
126 static int ip6_pcbopt (int, u_char
*, int, struct ip6_pktopts
**, int);
127 static int ip6_setpktoption (int, u_char
*, int, struct ip6_pktopts
*,
129 static int ip6_pcbopts (struct ip6_pktopts
**, struct mbuf
*,
130 struct socket
*, struct sockopt
*);
131 static int ip6_getpcbopt(struct ip6_pktopts
*, int, struct sockopt
*);
132 static int ip6_setmoptions (int, struct ip6_moptions
**, struct mbuf
*);
133 static int ip6_getmoptions (int, struct ip6_moptions
*, struct mbuf
**);
134 static int ip6_getpmtu(struct route_in6
*, struct route_in6
*,
135 struct ifnet
*, struct in6_addr
*, u_long
*, int *);
136 static int copyexthdr (void *, struct mbuf
**);
137 static int ip6_insertfraghdr (struct mbuf
*, struct mbuf
*, int,
139 static int ip6_insert_jumboopt (struct ip6_exthdrs
*, u_int32_t
);
140 static struct mbuf
*ip6_splithdr (struct mbuf
*);
141 static int copypktopts(struct ip6_pktopts
*, struct ip6_pktopts
*, int);
144 * IP6 output. The packet in mbuf chain m contains a skeletal IP6
145 * header (with pri, len, nxt, hlim, src, dst).
146 * This function may modify ver and hlim only.
147 * The mbuf chain containing the packet will be freed.
148 * The mbuf opt, if present, will not be freed.
150 * type of "mtu": rt_rmx.rmx_mtu is u_long, ifnet.ifr_mtu is int, and
151 * nd_ifinfo.linkmtu is u_int32_t. so we use u_long to hold largest one,
152 * which is rt_rmx.rmx_mtu.
155 ip6_output(struct mbuf
*m0
, struct ip6_pktopts
*opt
, struct route_in6
*ro
,
156 int flags
, struct ip6_moptions
*im6o
,
157 struct ifnet
**ifpp
, /* XXX: just for statistics */
160 struct ip6_hdr
*ip6
, *mhip6
;
161 struct ifnet
*ifp
, *origifp
;
165 int hlen
, tlen
, len
, off
;
166 struct route_in6 ip6route
;
167 struct sockaddr_in6
*dst
;
169 struct in6_ifaddr
*ia
= NULL
;
171 int alwaysfrag
, dontfrag
;
172 u_int32_t optlen
, plen
= 0, unfragpartlen
;
173 struct ip6_exthdrs exthdrs
;
174 struct in6_addr finaldst
;
175 struct route_in6
*ro_pmtu
= NULL
;
176 boolean_t hdrsplit
= FALSE
;
177 boolean_t needipsec
= FALSE
;
179 boolean_t needipsectun
= FALSE
;
180 struct secpolicy
*sp
= NULL
;
181 struct socket
*so
= inp
? inp
->inp_socket
: NULL
;
183 ip6
= mtod(m
, struct ip6_hdr
*);
186 boolean_t needipsectun
= FALSE
;
187 struct secpolicy
*sp
= NULL
;
189 ip6
= mtod(m
, struct ip6_hdr
*);
192 bzero(&exthdrs
, sizeof exthdrs
);
195 if ((error
= copyexthdr(opt
->ip6po_hbh
, &exthdrs
.ip6e_hbh
)))
197 if ((error
= copyexthdr(opt
->ip6po_dest1
, &exthdrs
.ip6e_dest1
)))
199 if ((error
= copyexthdr(opt
->ip6po_rthdr
, &exthdrs
.ip6e_rthdr
)))
201 if ((error
= copyexthdr(opt
->ip6po_dest2
, &exthdrs
.ip6e_dest2
)))
206 /* get a security policy for this packet */
208 sp
= ipsec6_getpolicybyaddr(m
, IPSEC_DIR_OUTBOUND
, 0, &error
);
210 sp
= ipsec6_getpolicybysock(m
, IPSEC_DIR_OUTBOUND
, so
, &error
);
213 ipsec6stat
.out_inval
++;
220 switch (sp
->policy
) {
221 case IPSEC_POLICY_DISCARD
:
223 * This packet is just discarded.
225 ipsec6stat
.out_polvio
++;
228 case IPSEC_POLICY_BYPASS
:
229 case IPSEC_POLICY_NONE
:
230 /* no need to do IPsec. */
234 case IPSEC_POLICY_IPSEC
:
235 if (sp
->req
== NULL
) {
236 error
= key_spdacquire(sp
); /* acquire a policy */
242 case IPSEC_POLICY_ENTRUST
:
244 kprintf("ip6_output: Invalid policy found. %d\n", sp
->policy
);
248 /* get a security policy for this packet */
250 sp
= ipsec_getpolicybyaddr(m
, IPSEC_DIR_OUTBOUND
, 0, &error
);
252 sp
= ipsec_getpolicybysock(m
, IPSEC_DIR_OUTBOUND
, inp
, &error
);
255 newipsecstat
.ips_out_inval
++;
262 switch (sp
->policy
) {
263 case IPSEC_POLICY_DISCARD
:
265 * This packet is just discarded.
267 newipsecstat
.ips_out_polvio
++;
270 case IPSEC_POLICY_BYPASS
:
271 case IPSEC_POLICY_NONE
:
272 /* no need to do IPsec. */
276 case IPSEC_POLICY_IPSEC
:
277 if (sp
->req
== NULL
) {
278 error
= key_spdacquire(sp
); /* acquire a policy */
284 case IPSEC_POLICY_ENTRUST
:
286 kprintf("ip6_output: Invalid policy found. %d\n", sp
->policy
);
288 #endif /* FAST_IPSEC */
291 * Calculate the total length of the extension header chain.
292 * Keep the length of the unfragmentable part for fragmentation.
294 optlen
= m_lengthm(exthdrs
.ip6e_hbh
, NULL
) +
295 m_lengthm(exthdrs
.ip6e_dest1
, NULL
) +
296 m_lengthm(exthdrs
.ip6e_rthdr
, NULL
);
298 unfragpartlen
= optlen
+ sizeof(struct ip6_hdr
);
300 /* NOTE: we don't add AH/ESP length here. do that later. */
301 optlen
+= m_lengthm(exthdrs
.ip6e_dest2
, NULL
);
304 * If we need IPsec, or there is at least one extension header,
305 * separate IP6 header from the payload.
307 if ((needipsec
|| optlen
) && !hdrsplit
) {
308 exthdrs
.ip6e_ip6
= ip6_splithdr(m
);
309 if (exthdrs
.ip6e_ip6
== NULL
) {
313 m
= exthdrs
.ip6e_ip6
;
318 ip6
= mtod(m
, struct ip6_hdr
*);
320 /* adjust mbuf packet header length */
321 m
->m_pkthdr
.len
+= optlen
;
322 plen
= m
->m_pkthdr
.len
- sizeof(*ip6
);
324 /* If this is a jumbo payload, insert a jumbo payload option. */
325 if (plen
> IPV6_MAXPACKET
) {
327 exthdrs
.ip6e_ip6
= ip6_splithdr(m
);
328 if (exthdrs
.ip6e_ip6
== NULL
) {
332 m
= exthdrs
.ip6e_ip6
;
336 ip6
= mtod(m
, struct ip6_hdr
*);
337 if ((error
= ip6_insert_jumboopt(&exthdrs
, plen
)) != 0)
341 ip6
->ip6_plen
= htons(plen
);
344 * Concatenate headers and fill in next header fields.
345 * Here we have, on "m"
347 * and we insert headers accordingly. Finally, we should be getting:
348 * IPv6 hbh dest1 rthdr ah* [esp* dest2 payload]
350 * during the header composing process, "m" points to IPv6 header.
351 * "mprev" points to an extension header prior to esp.
354 nexthdrp
= &ip6
->ip6_nxt
;
358 * we treat dest2 specially. this makes IPsec processing
359 * much easier. the goal here is to make mprev point the
360 * mbuf prior to dest2.
362 * result: IPv6 dest2 payload
363 * m and mprev will point to IPv6 header.
365 if (exthdrs
.ip6e_dest2
) {
367 panic("assumption failed: hdr not split");
368 exthdrs
.ip6e_dest2
->m_next
= m
->m_next
;
369 m
->m_next
= exthdrs
.ip6e_dest2
;
370 *mtod(exthdrs
.ip6e_dest2
, u_char
*) = ip6
->ip6_nxt
;
371 ip6
->ip6_nxt
= IPPROTO_DSTOPTS
;
375 * Place m1 after mprev.
377 #define MAKE_CHAIN(m1, mprev, nexthdrp, i)\
381 panic("assumption failed: hdr not split");\
382 *mtod(m1, u_char *) = *nexthdrp;\
384 nexthdrp = mtod(m1, u_char *);\
385 m1->m_next = mprev->m_next;\
392 * result: IPv6 hbh dest1 rthdr dest2 payload
393 * m will point to IPv6 header. mprev will point to the
394 * extension header prior to dest2 (rthdr in the above case).
396 MAKE_CHAIN(exthdrs
.ip6e_hbh
, mprev
, nexthdrp
, IPPROTO_HOPOPTS
);
397 MAKE_CHAIN(exthdrs
.ip6e_dest1
, mprev
, nexthdrp
, IPPROTO_DSTOPTS
);
398 MAKE_CHAIN(exthdrs
.ip6e_rthdr
, mprev
, nexthdrp
, IPPROTO_ROUTING
);
400 #if defined(IPSEC) || defined(FAST_IPSEC)
402 struct ipsec_output_state state
;
404 struct ip6_rthdr
*rh
= NULL
;
407 * pointers after IPsec headers are not valid any more.
408 * other pointers need a great care too.
409 * (IPsec routines should not mangle mbufs prior to AH/ESP)
411 exthdrs
.ip6e_dest2
= NULL
;
413 if (exthdrs
.ip6e_rthdr
) {
414 rh
= mtod(exthdrs
.ip6e_rthdr
, struct ip6_rthdr
*);
415 segleft_org
= rh
->ip6r_segleft
;
416 rh
->ip6r_segleft
= 0;
419 bzero(&state
, sizeof state
);
421 error
= ipsec6_output_trans(&state
, nexthdrp
, mprev
, sp
, flags
,
425 /* mbuf is already reclaimed in ipsec6_output_trans. */
435 kprintf("ip6_output (ipsec): error code %d\n",
439 /* don't show these error codes to the user */
445 if (exthdrs
.ip6e_rthdr
) {
446 /* ah6_output doesn't modify mbuf chain */
447 rh
->ip6r_segleft
= segleft_org
;
453 * If there is a routing header, replace destination address field
454 * with the first hop of the routing header.
456 if (exthdrs
.ip6e_rthdr
) {
457 struct ip6_rthdr
*rh
;
459 finaldst
= ip6
->ip6_dst
;
460 rh
= mtod(exthdrs
.ip6e_rthdr
, struct ip6_rthdr
*);
461 switch (rh
->ip6r_type
) {
462 default: /* is it possible? */
468 /* Source address validation */
469 if (IN6_IS_ADDR_UNSPECIFIED(&ip6
->ip6_src
) &&
470 !(flags
& IPV6_DADOUTPUT
)) {
472 ip6stat
.ip6s_badscope
++;
475 if (IN6_IS_ADDR_MULTICAST(&ip6
->ip6_src
)) {
477 ip6stat
.ip6s_badscope
++;
481 ip6stat
.ip6s_localout
++;
488 bzero(ro
, sizeof(*ro
));
491 if (opt
&& opt
->ip6po_rthdr
)
492 ro
= &opt
->ip6po_route
;
493 dst
= (struct sockaddr_in6
*)&ro
->ro_dst
;
495 * If there is a cached route,
496 * check that it is to the same destination
497 * and is still up. If not, free it and try again.
499 if (ro
->ro_rt
!= NULL
&&
500 (!(ro
->ro_rt
->rt_flags
& RTF_UP
) || dst
->sin6_family
!= AF_INET6
||
501 !IN6_ARE_ADDR_EQUAL(&dst
->sin6_addr
, &ip6
->ip6_dst
))) {
505 if (ro
->ro_rt
== NULL
) {
506 bzero(dst
, sizeof(*dst
));
507 dst
->sin6_family
= AF_INET6
;
508 dst
->sin6_len
= sizeof(struct sockaddr_in6
);
509 dst
->sin6_addr
= ip6
->ip6_dst
;
511 #if defined(IPSEC) || defined(FAST_IPSEC)
512 if (needipsec
&& needipsectun
) {
513 struct ipsec_output_state state
;
516 * All the extension headers will become inaccessible
517 * (since they can be encrypted).
518 * Don't panic, we need no more updates to extension headers
519 * on inner IPv6 packet (since they are now encapsulated).
521 * IPv6 [ESP|AH] IPv6 [extension headers] payload
523 bzero(&exthdrs
, sizeof(exthdrs
));
524 exthdrs
.ip6e_ip6
= m
;
526 bzero(&state
, sizeof(state
));
528 state
.ro
= (struct route
*)ro
;
529 state
.dst
= (struct sockaddr
*)dst
;
531 error
= ipsec6_output_tunnel(&state
, sp
, flags
);
534 ro
= (struct route_in6
*)state
.ro
;
535 dst
= (struct sockaddr_in6
*)state
.dst
;
537 /* mbuf is already reclaimed in ipsec6_output_tunnel. */
548 kprintf("ip6_output (ipsec): error code %d\n", error
);
551 /* don't show these error codes to the user */
558 exthdrs
.ip6e_ip6
= m
;
562 if (!IN6_IS_ADDR_MULTICAST(&ip6
->ip6_dst
)) {
565 #define ifatoia6(ifa) ((struct in6_ifaddr *)(ifa))
566 #define sin6tosa(sin6) ((struct sockaddr *)(sin6))
568 * interface selection comes here
569 * if an interface is specified from an upper layer,
572 if (ro
->ro_rt
== NULL
) {
574 * non-bsdi always clone routes, if parent is
577 rtalloc((struct route
*)ro
);
579 if (ro
->ro_rt
== NULL
) {
580 ip6stat
.ip6s_noroute
++;
581 error
= EHOSTUNREACH
;
582 /* XXX in6_ifstat_inc(ifp, ifs6_out_discard); */
585 ia
= ifatoia6(ro
->ro_rt
->rt_ifa
);
586 ifp
= ro
->ro_rt
->rt_ifp
;
588 if (ro
->ro_rt
->rt_flags
& RTF_GATEWAY
)
589 dst
= (struct sockaddr_in6
*)ro
->ro_rt
->rt_gateway
;
590 m
->m_flags
&= ~(M_BCAST
| M_MCAST
); /* just in case */
592 in6_ifstat_inc(ifp
, ifs6_out_request
);
595 * Check if the outgoing interface conflicts with
596 * the interface specified by ifi6_ifindex (if specified).
597 * Note that loopback interface is always okay.
598 * (this may happen when we are sending a packet to one of
599 * our own addresses.)
601 if (opt
&& opt
->ip6po_pktinfo
602 && opt
->ip6po_pktinfo
->ipi6_ifindex
) {
603 if (!(ifp
->if_flags
& IFF_LOOPBACK
)
604 && ifp
->if_index
!= opt
->ip6po_pktinfo
->ipi6_ifindex
) {
605 ip6stat
.ip6s_noroute
++;
606 in6_ifstat_inc(ifp
, ifs6_out_discard
);
607 error
= EHOSTUNREACH
;
612 if (opt
&& opt
->ip6po_hlim
!= -1)
613 ip6
->ip6_hlim
= opt
->ip6po_hlim
& 0xff;
616 struct in6_multi
*in6m
;
618 m
->m_flags
= (m
->m_flags
& ~M_BCAST
) | M_MCAST
;
621 * See if the caller provided any multicast options
625 ip6
->ip6_hlim
= im6o
->im6o_multicast_hlim
;
626 if (im6o
->im6o_multicast_ifp
!= NULL
)
627 ifp
= im6o
->im6o_multicast_ifp
;
629 ip6
->ip6_hlim
= ip6_defmcasthlim
;
632 * See if the caller provided the outgoing interface
633 * as an ancillary data.
634 * Boundary check for ifindex is assumed to be already done.
636 if (opt
&& opt
->ip6po_pktinfo
&& opt
->ip6po_pktinfo
->ipi6_ifindex
)
637 ifp
= ifindex2ifnet
[opt
->ip6po_pktinfo
->ipi6_ifindex
];
640 * If the destination is a node-local scope multicast,
641 * the packet should be loop-backed only.
643 if (IN6_IS_ADDR_MC_NODELOCAL(&ip6
->ip6_dst
)) {
645 * If the outgoing interface is already specified,
646 * it should be a loopback interface.
648 if (ifp
&& !(ifp
->if_flags
& IFF_LOOPBACK
)) {
649 ip6stat
.ip6s_badscope
++;
650 error
= ENETUNREACH
; /* XXX: better error? */
651 /* XXX correct ifp? */
652 in6_ifstat_inc(ifp
, ifs6_out_discard
);
659 if (opt
&& opt
->ip6po_hlim
!= -1)
660 ip6
->ip6_hlim
= opt
->ip6po_hlim
& 0xff;
663 * If caller did not provide an interface lookup a
664 * default in the routing table. This is either a
665 * default for the speicfied group (i.e. a host
666 * route), or a multicast default (a route for the
670 if (ro
->ro_rt
== NULL
) {
672 rtpurelookup((struct sockaddr
*)&ro
->ro_dst
);
674 if (ro
->ro_rt
== NULL
) {
675 ip6stat
.ip6s_noroute
++;
676 error
= EHOSTUNREACH
;
677 /* XXX in6_ifstat_inc(ifp, ifs6_out_discard) */
680 ia
= ifatoia6(ro
->ro_rt
->rt_ifa
);
681 ifp
= ro
->ro_rt
->rt_ifp
;
685 if (!(flags
& IPV6_FORWARDING
))
686 in6_ifstat_inc(ifp
, ifs6_out_request
);
687 in6_ifstat_inc(ifp
, ifs6_out_mcast
);
690 * Confirm that the outgoing interface supports multicast.
692 if (!(ifp
->if_flags
& IFF_MULTICAST
)) {
693 ip6stat
.ip6s_noroute
++;
694 in6_ifstat_inc(ifp
, ifs6_out_discard
);
698 IN6_LOOKUP_MULTI(ip6
->ip6_dst
, ifp
, in6m
);
700 (im6o
== NULL
|| im6o
->im6o_multicast_loop
)) {
702 * If we belong to the destination multicast group
703 * on the outgoing interface, and the caller did not
704 * forbid loopback, loop back a copy.
706 ip6_mloopback(ifp
, m
, dst
);
709 * If we are acting as a multicast router, perform
710 * multicast forwarding as if the packet had just
711 * arrived on the interface to which we are about
712 * to send. The multicast forwarding function
713 * recursively calls this function, using the
714 * IPV6_FORWARDING flag to prevent infinite recursion.
716 * Multicasts that are looped back by ip6_mloopback(),
717 * above, will be forwarded by the ip6_input() routine,
720 if (ip6_mrouter
&& !(flags
& IPV6_FORWARDING
)) {
721 if (ip6_mforward(ip6
, ifp
, m
) != 0) {
728 * Multicasts with a hoplimit of zero may be looped back,
729 * above, but must not be transmitted on a network.
730 * Also, multicasts addressed to the loopback interface
731 * are not sent -- the above call to ip6_mloopback() will
732 * loop back a copy if this host actually belongs to the
733 * destination group on the loopback interface.
735 if (ip6
->ip6_hlim
== 0 || (ifp
->if_flags
& IFF_LOOPBACK
)) {
742 * Fill the outgoing inteface to tell the upper layer
743 * to increment per-interface statistics.
748 /* Determine path MTU. */
749 if ((error
= ip6_getpmtu(ro_pmtu
, ro
, ifp
, &finaldst
, &mtu
,
754 * The caller of this function may specify to use the minimum MTU
756 * An advanced API option (IPV6_USE_MIN_MTU) can also override MTU
757 * setting. The logic is a bit complicated; by default, unicast
758 * packets will follow path MTU while multicast packets will be sent at
759 * the minimum MTU. If IP6PO_MINMTU_ALL is specified, all packets
760 * including unicast ones will be sent at the minimum MTU. Multicast
761 * packets will always be sent at the minimum MTU unless
762 * IP6PO_MINMTU_DISABLE is explicitly specified.
763 * See RFC 3542 for more details.
765 if (mtu
> IPV6_MMTU
) {
766 if ((flags
& IPV6_MINMTU
))
768 else if (opt
&& opt
->ip6po_minmtu
== IP6PO_MINMTU_ALL
)
770 else if (IN6_IS_ADDR_MULTICAST(&ip6
->ip6_dst
) &&
772 opt
->ip6po_minmtu
!= IP6PO_MINMTU_DISABLE
)) {
777 /* Fake scoped addresses */
778 if ((ifp
->if_flags
& IFF_LOOPBACK
) != 0) {
780 * If source or destination address is a scoped address, and
781 * the packet is going to be sent to a loopback interface,
782 * we should keep the original interface.
786 * XXX: this is a very experimental and temporary solution.
787 * We eventually have sockaddr_in6 and use the sin6_scope_id
788 * field of the structure here.
789 * We rely on the consistency between two scope zone ids
790 * of source and destination, which should already be assured.
791 * Larger scopes than link will be supported in the future.
794 if (IN6_IS_SCOPE_LINKLOCAL(&ip6
->ip6_src
))
795 origifp
= ifindex2ifnet
[ntohs(ip6
->ip6_src
.s6_addr16
[1])];
796 else if (IN6_IS_SCOPE_LINKLOCAL(&ip6
->ip6_dst
))
797 origifp
= ifindex2ifnet
[ntohs(ip6
->ip6_dst
.s6_addr16
[1])];
799 * XXX: origifp can be NULL even in those two cases above.
800 * For example, if we remove the (only) link-local address
801 * from the loopback interface, and try to send a link-local
802 * address without link-id information. Then the source
803 * address is ::1, and the destination address is the
804 * link-local address with its s6_addr16[1] being zero.
805 * What is worse, if the packet goes to the loopback interface
806 * by a default rejected route, the null pointer would be
807 * passed to looutput, and the kernel would hang.
808 * The following last resort would prevent such disaster.
816 * clear embedded scope identifiers if necessary.
817 * in6_clearscope will touch the addresses only when necessary.
819 in6_clearscope(&ip6
->ip6_src
);
820 in6_clearscope(&ip6
->ip6_dst
);
823 * Check with the firewall...
825 if (ip6_fw_enable
&& ip6_fw_chk_ptr
) {
828 m
->m_pkthdr
.rcvif
= NULL
; /* XXX */
829 /* If ipfw says divert, we have to just drop packet */
830 if ((*ip6_fw_chk_ptr
)(&ip6
, ifp
, &port
, &m
)) {
841 * If the outgoing packet contains a hop-by-hop options header,
842 * it must be examined and processed even by the source node.
843 * (RFC 2460, section 4.)
845 if (exthdrs
.ip6e_hbh
) {
846 struct ip6_hbh
*hbh
= mtod(exthdrs
.ip6e_hbh
, struct ip6_hbh
*);
847 u_int32_t dummy1
; /* XXX unused */
848 u_int32_t dummy2
; /* XXX unused */
851 if ((hbh
->ip6h_len
+ 1) << 3 > exthdrs
.ip6e_hbh
->m_len
)
852 panic("ip6e_hbh is not continuous");
855 * XXX: if we have to send an ICMPv6 error to the sender,
856 * we need the M_LOOP flag since icmp6_error() expects
857 * the IPv6 and the hop-by-hop options header are
858 * continuous unless the flag is set.
860 m
->m_flags
|= M_LOOP
;
861 m
->m_pkthdr
.rcvif
= ifp
;
862 if (ip6_process_hopopts(m
,
863 (u_int8_t
*)(hbh
+ 1),
864 ((hbh
->ip6h_len
+ 1) << 3) -
865 sizeof(struct ip6_hbh
),
866 &dummy1
, &dummy2
) < 0) {
867 /* m was already freed at this point */
868 error
= EINVAL
;/* better error? */
871 m
->m_flags
&= ~M_LOOP
; /* XXX */
872 m
->m_pkthdr
.rcvif
= NULL
;
876 * Run through list of hooks for output packets.
878 if (pfil_has_hooks(&inet6_pfil_hook
)) {
879 error
= pfil_run_hooks(&inet6_pfil_hook
, &m
, ifp
, PFIL_OUT
);
880 if (error
!= 0 || m
== NULL
)
882 ip6
= mtod(m
, struct ip6_hdr
*);
886 * Send the packet to the outgoing interface.
887 * If necessary, do IPv6 fragmentation before sending.
889 * the logic here is rather complex:
890 * 1: normal case (dontfrag == 0, alwaysfrag == 0)
891 * 1-a: send as is if tlen <= path mtu
892 * 1-b: fragment if tlen > path mtu
894 * 2: if user asks us not to fragment (dontfrag == 1)
895 * 2-a: send as is if tlen <= interface mtu
896 * 2-b: error if tlen > interface mtu
898 * 3: if we always need to attach fragment header (alwaysfrag == 1)
901 * 4: if dontfrag == 1 && alwaysfrag == 1
902 * error, as we cannot handle this conflicting request
904 tlen
= m
->m_pkthdr
.len
;
906 if (opt
&& (opt
->ip6po_flags
& IP6PO_DONTFRAG
))
910 if (dontfrag
&& alwaysfrag
) { /* case 4 */
911 /* conflicting request - can't transmit */
915 if (dontfrag
&& tlen
> IN6_LINKMTU(ifp
)) { /* case 2-b */
917 * Even if the DONTFRAG option is specified, we cannot send the
918 * packet when the data length is larger than the MTU of the
919 * outgoing interface.
920 * Notify the error by sending IPV6_PATHMTU ancillary data as
921 * well as returning an error code (the latter is not described
925 struct ip6ctlparam ip6cp
;
927 mtu32
= (u_int32_t
)mtu
;
928 bzero(&ip6cp
, sizeof(ip6cp
));
929 ip6cp
.ip6c_cmdarg
= (void *)&mtu32
;
930 kpfctlinput2(PRC_MSGSIZE
, (struct sockaddr
*)&ro_pmtu
->ro_dst
,
938 * transmit packet without fragmentation
940 if (dontfrag
|| (!alwaysfrag
&& tlen
<= mtu
)) { /* case 1-a and 2-a */
941 struct in6_ifaddr
*ia6
;
943 ip6
= mtod(m
, struct ip6_hdr
*);
944 ia6
= in6_ifawithifp(ifp
, &ip6
->ip6_src
);
946 /* Record statistics for this interface address. */
947 IFA_STAT_INC(&ia6
->ia_ifa
, opackets
, 1);
948 IFA_STAT_INC(&ia6
->ia_ifa
, obytes
, m
->m_pkthdr
.len
);
951 /* clean ipsec history once it goes out of the node */
954 error
= nd6_output(ifp
, origifp
, m
, dst
, ro
->ro_rt
);
959 * try to fragment the packet. case 1-b and 3
961 if (mtu
< IPV6_MMTU
) {
963 * note that path MTU is never less than IPV6_MMTU
967 in6_ifstat_inc(ifp
, ifs6_out_fragfail
);
969 } else if (ip6
->ip6_plen
== 0) { /* jumbo payload cannot be fragmented */
971 in6_ifstat_inc(ifp
, ifs6_out_fragfail
);
974 struct mbuf
**mnext
, *m_frgpart
;
975 struct ip6_frag
*ip6f
;
976 u_int32_t id
= htonl(ip6_id
++);
980 * Too large for the destination or interface;
981 * fragment if possible.
982 * Must be able to put at least 8 bytes per fragment.
984 hlen
= unfragpartlen
;
985 if (mtu
> IPV6_MAXPACKET
)
986 mtu
= IPV6_MAXPACKET
;
988 len
= (mtu
- hlen
- sizeof(struct ip6_frag
)) & ~7;
991 in6_ifstat_inc(ifp
, ifs6_out_fragfail
);
995 mnext
= &m
->m_nextpkt
;
998 * Change the next header field of the last header in the
999 * unfragmentable part.
1001 if (exthdrs
.ip6e_rthdr
) {
1002 nextproto
= *mtod(exthdrs
.ip6e_rthdr
, u_char
*);
1003 *mtod(exthdrs
.ip6e_rthdr
, u_char
*) = IPPROTO_FRAGMENT
;
1004 } else if (exthdrs
.ip6e_dest1
) {
1005 nextproto
= *mtod(exthdrs
.ip6e_dest1
, u_char
*);
1006 *mtod(exthdrs
.ip6e_dest1
, u_char
*) = IPPROTO_FRAGMENT
;
1007 } else if (exthdrs
.ip6e_hbh
) {
1008 nextproto
= *mtod(exthdrs
.ip6e_hbh
, u_char
*);
1009 *mtod(exthdrs
.ip6e_hbh
, u_char
*) = IPPROTO_FRAGMENT
;
1011 nextproto
= ip6
->ip6_nxt
;
1012 ip6
->ip6_nxt
= IPPROTO_FRAGMENT
;
1016 * Loop through length of segment after first fragment,
1017 * make new header and copy data of each part and link onto
1021 for (off
= hlen
; off
< tlen
; off
+= len
) {
1022 MGETHDR(m
, MB_DONTWAIT
, MT_HEADER
);
1025 ip6stat
.ip6s_odropped
++;
1028 m
->m_pkthdr
.rcvif
= NULL
;
1029 m
->m_flags
= m0
->m_flags
& M_COPYFLAGS
;
1031 mnext
= &m
->m_nextpkt
;
1032 m
->m_data
+= max_linkhdr
;
1033 mhip6
= mtod(m
, struct ip6_hdr
*);
1035 m
->m_len
= sizeof(*mhip6
);
1036 error
= ip6_insertfraghdr(m0
, m
, hlen
, &ip6f
);
1038 ip6stat
.ip6s_odropped
++;
1041 ip6f
->ip6f_offlg
= htons((u_short
)((off
- hlen
) & ~7));
1042 if (off
+ len
>= tlen
)
1045 ip6f
->ip6f_offlg
|= IP6F_MORE_FRAG
;
1046 mhip6
->ip6_plen
= htons((u_short
)(len
+ hlen
+
1048 sizeof(struct ip6_hdr
)));
1049 if ((m_frgpart
= m_copy(m0
, off
, len
)) == NULL
) {
1051 ip6stat
.ip6s_odropped
++;
1054 m_cat(m
, m_frgpart
);
1055 m
->m_pkthdr
.len
= len
+ hlen
+ sizeof(*ip6f
);
1056 m
->m_pkthdr
.rcvif
= NULL
;
1057 ip6f
->ip6f_reserved
= 0;
1058 ip6f
->ip6f_ident
= id
;
1059 ip6f
->ip6f_nxt
= nextproto
;
1060 ip6stat
.ip6s_ofragments
++;
1061 in6_ifstat_inc(ifp
, ifs6_out_fragcreat
);
1064 in6_ifstat_inc(ifp
, ifs6_out_fragok
);
1068 * Remove leading garbages.
1072 m0
->m_nextpkt
= NULL
;
1074 for (m0
= m
; m
; m
= m0
) {
1076 m
->m_nextpkt
= NULL
;
1078 /* Record statistics for this interface address. */
1080 IFA_STAT_INC(&ia
->ia_ifa
, opackets
, 1);
1081 IFA_STAT_INC(&ia
->ia_ifa
, obytes
,
1085 /* clean ipsec history once it goes out of the node */
1088 error
= nd6_output(ifp
, origifp
, m
, dst
, ro
->ro_rt
);
1094 ip6stat
.ip6s_fragmented
++;
1097 if (ro
== &ip6route
&& ro
->ro_rt
) { /* brace necessary for RTFREE */
1099 } else if (ro_pmtu
== &ip6route
&& ro_pmtu
->ro_rt
) {
1100 RTFREE(ro_pmtu
->ro_rt
);
1115 m_freem(exthdrs
.ip6e_hbh
); /* m_freem will check if mbuf is 0 */
1116 m_freem(exthdrs
.ip6e_dest1
);
1117 m_freem(exthdrs
.ip6e_rthdr
);
1118 m_freem(exthdrs
.ip6e_dest2
);
1126 copyexthdr(void *h
, struct mbuf
**mp
)
1128 struct ip6_ext
*hdr
= h
;
1135 hlen
= (hdr
->ip6e_len
+ 1) * 8;
1136 if (hlen
> MCLBYTES
)
1137 return ENOBUFS
; /* XXX */
1139 m
= m_getb(hlen
, MB_DONTWAIT
, MT_DATA
, 0);
1144 bcopy(hdr
, mtod(m
, caddr_t
), hlen
);
1151 * Insert jumbo payload option.
1154 ip6_insert_jumboopt(struct ip6_exthdrs
*exthdrs
, u_int32_t plen
)
1160 #define JUMBOOPTLEN 8 /* length of jumbo payload option and padding */
1163 * If there is no hop-by-hop options header, allocate new one.
1164 * If there is one but it doesn't have enough space to store the
1165 * jumbo payload option, allocate a cluster to store the whole options.
1166 * Otherwise, use it to store the options.
1168 if (exthdrs
->ip6e_hbh
== NULL
) {
1169 MGET(mopt
, MB_DONTWAIT
, MT_DATA
);
1172 mopt
->m_len
= JUMBOOPTLEN
;
1173 optbuf
= mtod(mopt
, u_char
*);
1174 optbuf
[1] = 0; /* = ((JUMBOOPTLEN) >> 3) - 1 */
1175 exthdrs
->ip6e_hbh
= mopt
;
1177 struct ip6_hbh
*hbh
;
1179 mopt
= exthdrs
->ip6e_hbh
;
1180 if (M_TRAILINGSPACE(mopt
) < JUMBOOPTLEN
) {
1183 * - exthdrs->ip6e_hbh is not referenced from places
1184 * other than exthdrs.
1185 * - exthdrs->ip6e_hbh is not an mbuf chain.
1187 int oldoptlen
= mopt
->m_len
;
1191 * XXX: give up if the whole (new) hbh header does
1192 * not fit even in an mbuf cluster.
1194 if (oldoptlen
+ JUMBOOPTLEN
> MCLBYTES
)
1198 * As a consequence, we must always prepare a cluster
1201 n
= m_getcl(MB_DONTWAIT
, MT_DATA
, 0);
1204 n
->m_len
= oldoptlen
+ JUMBOOPTLEN
;
1205 bcopy(mtod(mopt
, caddr_t
), mtod(n
, caddr_t
), oldoptlen
);
1206 optbuf
= mtod(n
, caddr_t
) + oldoptlen
;
1208 mopt
= exthdrs
->ip6e_hbh
= n
;
1210 optbuf
= mtod(mopt
, u_char
*) + mopt
->m_len
;
1211 mopt
->m_len
+= JUMBOOPTLEN
;
1213 optbuf
[0] = IP6OPT_PADN
;
1217 * Adjust the header length according to the pad and
1218 * the jumbo payload option.
1220 hbh
= mtod(mopt
, struct ip6_hbh
*);
1221 hbh
->ip6h_len
+= (JUMBOOPTLEN
>> 3);
1224 /* fill in the option. */
1225 optbuf
[2] = IP6OPT_JUMBO
;
1227 v
= (u_int32_t
)htonl(plen
+ JUMBOOPTLEN
);
1228 bcopy(&v
, &optbuf
[4], sizeof(u_int32_t
));
1230 /* finally, adjust the packet header length */
1231 exthdrs
->ip6e_ip6
->m_pkthdr
.len
+= JUMBOOPTLEN
;
1238 * Insert fragment header and copy unfragmentable header portions.
1241 ip6_insertfraghdr(struct mbuf
*m0
, struct mbuf
*m
, int hlen
,
1242 struct ip6_frag
**frghdrp
)
1244 struct mbuf
*n
, *mlast
;
1246 if (hlen
> sizeof(struct ip6_hdr
)) {
1247 n
= m_copym(m0
, sizeof(struct ip6_hdr
),
1248 hlen
- sizeof(struct ip6_hdr
), MB_DONTWAIT
);
1255 /* Search for the last mbuf of unfragmentable part. */
1256 for (mlast
= n
; mlast
->m_next
; mlast
= mlast
->m_next
)
1259 if (!(mlast
->m_flags
& M_EXT
) &&
1260 M_TRAILINGSPACE(mlast
) >= sizeof(struct ip6_frag
)) {
1261 /* use the trailing space of the last mbuf for the fragment hdr */
1263 (struct ip6_frag
*)(mtod(mlast
, caddr_t
) + mlast
->m_len
);
1264 mlast
->m_len
+= sizeof(struct ip6_frag
);
1265 m
->m_pkthdr
.len
+= sizeof(struct ip6_frag
);
1267 /* allocate a new mbuf for the fragment header */
1270 MGET(mfrg
, MB_DONTWAIT
, MT_DATA
);
1273 mfrg
->m_len
= sizeof(struct ip6_frag
);
1274 *frghdrp
= mtod(mfrg
, struct ip6_frag
*);
1275 mlast
->m_next
= mfrg
;
1282 ip6_getpmtu(struct route_in6
*ro_pmtu
, struct route_in6
*ro
,
1283 struct ifnet
*ifp
, struct in6_addr
*dst
, u_long
*mtup
,
1290 if (ro_pmtu
!= ro
) {
1291 /* The first hop and the final destination may differ. */
1292 struct sockaddr_in6
*sa6_dst
=
1293 (struct sockaddr_in6
*)&ro_pmtu
->ro_dst
;
1294 if (ro_pmtu
->ro_rt
&&
1295 ((ro_pmtu
->ro_rt
->rt_flags
& RTF_UP
) == 0 ||
1296 !IN6_ARE_ADDR_EQUAL(&sa6_dst
->sin6_addr
, dst
))) {
1297 RTFREE(ro_pmtu
->ro_rt
);
1298 ro_pmtu
->ro_rt
= NULL
;
1300 if (ro_pmtu
->ro_rt
== NULL
) {
1301 bzero(sa6_dst
, sizeof(*sa6_dst
));
1302 sa6_dst
->sin6_family
= AF_INET6
;
1303 sa6_dst
->sin6_len
= sizeof(struct sockaddr_in6
);
1304 sa6_dst
->sin6_addr
= *dst
;
1306 rtalloc((struct route
*)ro_pmtu
);
1309 if (ro_pmtu
->ro_rt
) {
1311 struct in_conninfo inc
;
1313 bzero(&inc
, sizeof(inc
));
1314 inc
.inc_flags
= 1; /* IPv6 */
1315 inc
.inc6_faddr
= *dst
;
1318 ifp
= ro_pmtu
->ro_rt
->rt_ifp
;
1319 ifmtu
= IN6_LINKMTU(ifp
);
1320 mtu
= ro_pmtu
->ro_rt
->rt_rmx
.rmx_mtu
;
1323 else if (mtu
< IPV6_MMTU
) {
1325 * RFC2460 section 5, last paragraph:
1326 * if we record ICMPv6 too big message with
1327 * mtu < IPV6_MMTU, transmit packets sized IPV6_MMTU
1328 * or smaller, with framgent header attached.
1329 * (fragment header is needed regardless from the
1330 * packet size, for translators to identify packets)
1334 } else if (mtu
> ifmtu
) {
1336 * The MTU on the route is larger than the MTU on
1337 * the interface! This shouldn't happen, unless the
1338 * MTU of the interface has been changed after the
1339 * interface was brought up. Change the MTU in the
1340 * route to match the interface MTU (as long as the
1341 * field isn't locked).
1344 ro_pmtu
->ro_rt
->rt_rmx
.rmx_mtu
= mtu
;
1347 mtu
= IN6_LINKMTU(ifp
);
1349 error
= EHOSTUNREACH
; /* XXX */
1353 *alwaysfragp
= alwaysfrag
;
1358 * IP6 socket option processing.
1361 ip6_ctloutput_dispatch(netmsg_t msg
)
1365 error
= ip6_ctloutput(msg
->ctloutput
.base
.nm_so
,
1366 msg
->ctloutput
.nm_sopt
);
1367 lwkt_replymsg(&msg
->ctloutput
.base
.lmsg
, error
);
1371 ip6_ctloutput(struct socket
*so
, struct sockopt
*sopt
)
1373 int optdatalen
,uproto
;
1375 struct inpcb
*in6p
= so
->so_pcb
;
1378 int level
, op
, optname
;
1383 level
= sopt
->sopt_level
;
1384 op
= sopt
->sopt_dir
;
1385 optname
= sopt
->sopt_name
;
1386 optlen
= sopt
->sopt_valsize
;
1389 panic("ip6_ctloutput: arg soopt is NULL");
1395 uproto
= (int)so
->so_proto
->pr_protocol
;
1396 privileged
= (td
== NULL
|| priv_check(td
, PRIV_ROOT
)) ? 0 : 1;
1398 if (level
== IPPROTO_IPV6
) {
1403 case IPV6_2292PKTOPTIONS
:
1404 #ifdef IPV6_PKTOPTIONS
1405 case IPV6_PKTOPTIONS
:
1410 error
= soopt_getm(sopt
, &m
); /* XXX */
1413 soopt_to_mbuf(sopt
, m
); /* XXX */
1414 error
= ip6_pcbopts(&in6p
->in6p_outputopts
,
1416 m_freem(m
); /* XXX */
1421 * Use of some Hop-by-Hop options or some
1422 * Destination options, might require special
1423 * privilege. That is, normal applications
1424 * (without special privilege) might be forbidden
1425 * from setting certain options in outgoing packets,
1426 * and might never see certain options in received
1427 * packets. [RFC 2292 Section 6]
1428 * KAME specific note:
1429 * KAME prevents non-privileged users from sending or
1430 * receiving ANY hbh/dst options in order to avoid
1431 * overhead of parsing options in the kernel.
1433 case IPV6_RECVHOPOPTS
:
1434 case IPV6_RECVDSTOPTS
:
1435 case IPV6_RECVRTHDRDSTOPTS
:
1438 case IPV6_RECVPKTINFO
:
1439 case IPV6_RECVHOPLIMIT
:
1440 case IPV6_RECVRTHDR
:
1441 case IPV6_RECVPATHMTU
:
1442 case IPV6_RECVTCLASS
:
1443 case IPV6_AUTOFLOWLABEL
:
1446 case IPV6_UNICAST_HOPS
:
1450 if (optlen
!= sizeof(int)) {
1454 error
= soopt_to_kbuf(sopt
, &optval
,
1455 sizeof optval
, sizeof optval
);
1460 case IPV6_UNICAST_HOPS
:
1461 if (optval
< -1 || optval
>= 256)
1464 /* -1 = kernel default */
1465 in6p
->in6p_hops
= optval
;
1467 if ((in6p
->in6p_vflag
&
1469 in6p
->inp_ip_ttl
= optval
;
1472 #define OPTSET(bit) \
1475 in6p->in6p_flags |= (bit); \
1477 in6p->in6p_flags &= ~(bit); \
1479 #define OPTBIT(bit) (in6p->in6p_flags & (bit) ? 1 : 0)
1481 * Although changed to RFC3542, It's better to also support RFC2292 API
1483 #define OPTSET2292(bit) \
1485 in6p->in6p_flags |= IN6P_RFC2292; \
1487 in6p->in6p_flags |= (bit); \
1489 in6p->in6p_flags &= ~(bit); \
1490 } while (/*CONSTCOND*/ 0)
1492 case IPV6_RECVPKTINFO
:
1493 /* cannot mix with RFC2292 */
1494 if (OPTBIT(IN6P_RFC2292
)) {
1498 OPTSET(IN6P_PKTINFO
);
1503 struct ip6_pktopts
**optp
;
1505 /* cannot mix with RFC2292 */
1506 if (OPTBIT(IN6P_RFC2292
)) {
1510 optp
= &in6p
->in6p_outputopts
;
1511 error
= ip6_pcbopt(IPV6_HOPLIMIT
,
1512 (u_char
*)&optval
, sizeof(optval
),
1517 case IPV6_RECVHOPLIMIT
:
1518 /* cannot mix with RFC2292 */
1519 if (OPTBIT(IN6P_RFC2292
)) {
1523 OPTSET(IN6P_HOPLIMIT
);
1526 case IPV6_RECVHOPOPTS
:
1527 /* cannot mix with RFC2292 */
1528 if (OPTBIT(IN6P_RFC2292
)) {
1532 OPTSET(IN6P_HOPOPTS
);
1535 case IPV6_RECVDSTOPTS
:
1536 /* cannot mix with RFC2292 */
1537 if (OPTBIT(IN6P_RFC2292
)) {
1541 OPTSET(IN6P_DSTOPTS
);
1544 case IPV6_RECVRTHDRDSTOPTS
:
1545 /* cannot mix with RFC2292 */
1546 if (OPTBIT(IN6P_RFC2292
)) {
1550 OPTSET(IN6P_RTHDRDSTOPTS
);
1553 case IPV6_RECVRTHDR
:
1554 /* cannot mix with RFC2292 */
1555 if (OPTBIT(IN6P_RFC2292
)) {
1562 case IPV6_RECVPATHMTU
:
1564 * We ignore this option for TCP
1566 * (RFC3542 leaves this case
1569 if (uproto
!= IPPROTO_TCP
)
1573 case IPV6_RECVTCLASS
:
1574 /* cannot mix with RFC2292 XXX */
1575 if (OPTBIT(IN6P_RFC2292
)) {
1579 OPTSET(IN6P_TCLASS
);
1582 case IPV6_AUTOFLOWLABEL
:
1583 OPTSET(IN6P_AUTOFLOWLABEL
);
1592 * make setsockopt(IPV6_V6ONLY)
1593 * available only prior to bind(2).
1595 if (in6p
->in6p_lport
||
1596 !IN6_IS_ADDR_UNSPECIFIED(&in6p
->in6p_laddr
))
1601 OPTSET(IN6P_IPV6_V6ONLY
);
1603 in6p
->in6p_vflag
&= ~INP_IPV4
;
1605 in6p
->in6p_vflag
|= INP_IPV4
;
1612 case IPV6_USE_MIN_MTU
:
1613 case IPV6_PREFER_TEMPADDR
:
1614 if (optlen
!= sizeof(optval
)) {
1618 error
= soopt_to_kbuf(sopt
, &optval
,
1619 sizeof optval
, sizeof optval
);
1623 struct ip6_pktopts
**optp
;
1624 optp
= &in6p
->in6p_outputopts
;
1625 error
= ip6_pcbopt(optname
,
1626 (u_char
*)&optval
, sizeof(optval
),
1631 case IPV6_2292PKTINFO
:
1632 case IPV6_2292HOPLIMIT
:
1633 case IPV6_2292HOPOPTS
:
1634 case IPV6_2292DSTOPTS
:
1635 case IPV6_2292RTHDR
:
1637 if (optlen
!= sizeof(int)) {
1641 error
= soopt_to_kbuf(sopt
, &optval
,
1642 sizeof optval
, sizeof optval
);
1646 case IPV6_2292PKTINFO
:
1647 OPTSET2292(IN6P_PKTINFO
);
1649 case IPV6_2292HOPLIMIT
:
1650 OPTSET2292(IN6P_HOPLIMIT
);
1652 case IPV6_2292HOPOPTS
:
1654 * Check super-user privilege.
1655 * See comments for IPV6_RECVHOPOPTS.
1659 OPTSET2292(IN6P_HOPOPTS
);
1661 case IPV6_2292DSTOPTS
:
1664 OPTSET2292(IN6P_DSTOPTS
|IN6P_RTHDRDSTOPTS
); /* XXX */
1666 case IPV6_2292RTHDR
:
1667 OPTSET2292(IN6P_RTHDR
);
1676 case IPV6_RTHDRDSTOPTS
:
1680 * New advanced API (RFC3542)
1683 u_char optbuf_storage
[MCLBYTES
];
1685 struct ip6_pktopts
**optp
;
1687 /* cannot mix with RFC2292 */
1688 if (OPTBIT(IN6P_RFC2292
)) {
1694 * We only ensure valsize is not too large
1695 * here. Further validation will be done
1698 error
= soopt_to_kbuf(sopt
, optbuf_storage
,
1699 sizeof(optbuf_storage
), 0);
1702 optlen
= sopt
->sopt_valsize
;
1703 optbuf
= optbuf_storage
;
1704 optp
= &in6p
->in6p_outputopts
;
1705 error
= ip6_pcbopt(optname
, optbuf
, optlen
,
1711 case IPV6_MULTICAST_IF
:
1712 case IPV6_MULTICAST_HOPS
:
1713 case IPV6_MULTICAST_LOOP
:
1714 case IPV6_JOIN_GROUP
:
1715 case IPV6_LEAVE_GROUP
:
1718 if (sopt
->sopt_valsize
> MLEN
) {
1723 MGET(m
, sopt
->sopt_td
? MB_WAIT
: MB_DONTWAIT
, MT_HEADER
);
1728 m
->m_len
= sopt
->sopt_valsize
;
1729 error
= soopt_to_kbuf(sopt
, mtod(m
, char *),
1730 m
->m_len
, m
->m_len
);
1731 error
= ip6_setmoptions(sopt
->sopt_name
,
1732 &in6p
->in6p_moptions
,
1738 case IPV6_PORTRANGE
:
1739 error
= soopt_to_kbuf(sopt
, &optval
,
1740 sizeof optval
, sizeof optval
);
1745 case IPV6_PORTRANGE_DEFAULT
:
1746 in6p
->in6p_flags
&= ~(IN6P_LOWPORT
);
1747 in6p
->in6p_flags
&= ~(IN6P_HIGHPORT
);
1750 case IPV6_PORTRANGE_HIGH
:
1751 in6p
->in6p_flags
&= ~(IN6P_LOWPORT
);
1752 in6p
->in6p_flags
|= IN6P_HIGHPORT
;
1755 case IPV6_PORTRANGE_LOW
:
1756 in6p
->in6p_flags
&= ~(IN6P_HIGHPORT
);
1757 in6p
->in6p_flags
|= IN6P_LOWPORT
;
1766 #if defined(IPSEC) || defined(FAST_IPSEC)
1767 case IPV6_IPSEC_POLICY
:
1773 if ((error
= soopt_getm(sopt
, &m
)) != 0) /* XXX */
1775 soopt_to_mbuf(sopt
, m
); /* XXX */
1777 req
= mtod(m
, caddr_t
);
1780 error
= ipsec6_set_policy(in6p
, optname
, req
,
1785 #endif /* KAME IPSEC */
1793 struct mbuf
**mp
= &m
;
1795 if (ip6_fw_ctl_ptr
== NULL
)
1798 if ((error
= soopt_getm(sopt
, &m
)) != 0)
1801 soopt_to_mbuf(sopt
, m
);
1802 error
= (*ip6_fw_ctl_ptr
)(optname
, mp
);
1808 error
= ENOPROTOOPT
;
1815 case IPV6_2292PKTOPTIONS
:
1816 #ifdef IPV6_PKTOPTIONS
1817 case IPV6_PKTOPTIONS
:
1820 * RFC3542 (effectively) deprecated the
1821 * semantics of the 2292-style pktoptions.
1822 * Since it was not reliable in nature (i.e.,
1823 * applications had to expect the lack of some
1824 * information after all), it would make sense
1825 * to simplify this part by always returning
1828 if (in6p
->in6p_options
) {
1830 m
= m_copym(in6p
->in6p_options
,
1831 0, M_COPYALL
, MB_WAIT
);
1832 error
= soopt_from_mbuf(sopt
, m
);
1836 sopt
->sopt_valsize
= 0;
1839 case IPV6_RECVHOPOPTS
:
1840 case IPV6_RECVDSTOPTS
:
1841 case IPV6_RECVRTHDRDSTOPTS
:
1842 case IPV6_UNICAST_HOPS
:
1843 case IPV6_RECVPKTINFO
:
1844 case IPV6_RECVHOPLIMIT
:
1845 case IPV6_RECVRTHDR
:
1846 case IPV6_RECVPATHMTU
:
1847 case IPV6_RECVTCLASS
:
1848 case IPV6_AUTOFLOWLABEL
:
1851 case IPV6_PORTRANGE
:
1854 case IPV6_RECVHOPOPTS
:
1855 optval
= OPTBIT(IN6P_HOPOPTS
);
1858 case IPV6_RECVDSTOPTS
:
1859 optval
= OPTBIT(IN6P_DSTOPTS
);
1862 case IPV6_RECVRTHDRDSTOPTS
:
1863 optval
= OPTBIT(IN6P_RTHDRDSTOPTS
);
1866 case IPV6_RECVPKTINFO
:
1867 optval
= OPTBIT(IN6P_PKTINFO
);
1870 case IPV6_RECVHOPLIMIT
:
1871 optval
= OPTBIT(IN6P_HOPLIMIT
);
1874 case IPV6_RECVRTHDR
:
1875 optval
= OPTBIT(IN6P_RTHDR
);
1878 case IPV6_RECVPATHMTU
:
1879 optval
= OPTBIT(IN6P_MTU
);
1882 case IPV6_RECVTCLASS
:
1883 optval
= OPTBIT(IN6P_TCLASS
);
1886 case IPV6_AUTOFLOWLABEL
:
1887 optval
= OPTBIT(IN6P_AUTOFLOWLABEL
);
1891 case IPV6_UNICAST_HOPS
:
1892 optval
= in6p
->in6p_hops
;
1896 optval
= OPTBIT(IN6P_FAITH
);
1900 optval
= OPTBIT(IN6P_IPV6_V6ONLY
);
1903 case IPV6_PORTRANGE
:
1906 flags
= in6p
->in6p_flags
;
1907 if (flags
& IN6P_HIGHPORT
)
1908 optval
= IPV6_PORTRANGE_HIGH
;
1909 else if (flags
& IN6P_LOWPORT
)
1910 optval
= IPV6_PORTRANGE_LOW
;
1916 soopt_from_kbuf(sopt
, &optval
,
1923 struct ip6_mtuinfo mtuinfo
;
1924 struct route_in6 sro
;
1926 bzero(&sro
, sizeof(sro
));
1928 if (!(so
->so_state
& SS_ISCONNECTED
))
1931 * XXX: we dot not consider the case of source
1932 * routing, or optional information to specify
1933 * the outgoing interface.
1935 error
= ip6_getpmtu(&sro
, NULL
, NULL
,
1936 &in6p
->in6p_faddr
, &pmtu
, NULL
);
1941 if (pmtu
> IPV6_MAXPACKET
)
1942 pmtu
= IPV6_MAXPACKET
;
1944 bzero(&mtuinfo
, sizeof(mtuinfo
));
1945 mtuinfo
.ip6m_mtu
= (u_int32_t
)pmtu
;
1946 optdata
= (void *)&mtuinfo
;
1947 optdatalen
= sizeof(mtuinfo
);
1948 soopt_from_kbuf(sopt
, optdata
,
1953 case IPV6_2292PKTINFO
:
1954 case IPV6_2292HOPLIMIT
:
1955 case IPV6_2292HOPOPTS
:
1956 case IPV6_2292RTHDR
:
1957 case IPV6_2292DSTOPTS
:
1958 if (optname
== IPV6_2292HOPOPTS
||
1959 optname
== IPV6_2292DSTOPTS
||
1963 case IPV6_2292PKTINFO
:
1964 optval
= OPTBIT(IN6P_PKTINFO
);
1966 case IPV6_2292HOPLIMIT
:
1967 optval
= OPTBIT(IN6P_HOPLIMIT
);
1969 case IPV6_2292HOPOPTS
:
1972 optval
= OPTBIT(IN6P_HOPOPTS
);
1974 case IPV6_2292RTHDR
:
1975 optval
= OPTBIT(IN6P_RTHDR
);
1977 case IPV6_2292DSTOPTS
:
1980 optval
= OPTBIT(IN6P_DSTOPTS
|IN6P_RTHDRDSTOPTS
);
1983 soopt_from_kbuf(sopt
, &optval
,
1991 case IPV6_RTHDRDSTOPTS
:
1995 case IPV6_USE_MIN_MTU
:
1996 case IPV6_PREFER_TEMPADDR
:
1997 error
= ip6_getpcbopt(in6p
->in6p_outputopts
,
2001 case IPV6_MULTICAST_IF
:
2002 case IPV6_MULTICAST_HOPS
:
2003 case IPV6_MULTICAST_LOOP
:
2004 case IPV6_JOIN_GROUP
:
2005 case IPV6_LEAVE_GROUP
:
2008 error
= ip6_getmoptions(sopt
->sopt_name
,
2009 in6p
->in6p_moptions
, &m
);
2011 soopt_from_kbuf(sopt
,
2012 mtod(m
, char *), m
->m_len
);
2017 #if defined(IPSEC) || defined(FAST_IPSEC)
2018 case IPV6_IPSEC_POLICY
:
2022 struct mbuf
*m
= NULL
;
2023 struct mbuf
**mp
= &m
;
2025 error
= soopt_getm(sopt
, &m
); /* XXX */
2028 soopt_to_mbuf(sopt
, m
); /* XXX */
2030 req
= mtod(m
, caddr_t
);
2033 error
= ipsec6_get_policy(in6p
, req
, len
, mp
);
2035 error
= soopt_from_mbuf(sopt
, m
); /*XXX*/
2036 if (error
== 0 && m
!= NULL
)
2040 #endif /* KAME IPSEC */
2045 struct mbuf
**mp
= &m
;
2047 if (ip6_fw_ctl_ptr
== NULL
)
2051 error
= (*ip6_fw_ctl_ptr
)(optname
, mp
);
2053 error
= soopt_from_mbuf(sopt
, m
); /* XXX */
2054 if (error
== 0 && m
!= NULL
)
2060 error
= ENOPROTOOPT
;
2072 ip6_raw_ctloutput(struct socket
*so
, struct sockopt
*sopt
)
2074 int error
= 0, optval
, optlen
;
2075 const int icmp6off
= offsetof(struct icmp6_hdr
, icmp6_cksum
);
2076 struct in6pcb
*in6p
= sotoin6pcb(so
);
2077 int level
, op
, optname
;
2080 level
= sopt
->sopt_level
;
2081 op
= sopt
->sopt_dir
;
2082 optname
= sopt
->sopt_name
;
2083 optlen
= sopt
->sopt_valsize
;
2085 panic("ip6_raw_ctloutput: arg soopt is NULL");
2087 if (level
!= IPPROTO_IPV6
) {
2094 * For ICMPv6 sockets, no modification allowed for checksum
2095 * offset, permit "no change" values to help existing apps.
2097 * RFC3542 says: "An attempt to set IPV6_CHECKSUM
2098 * for an ICMPv6 socket will fail."
2099 * The current behavior does not meet RFC3542.
2103 if (optlen
!= sizeof(int)) {
2107 error
= soopt_to_kbuf(sopt
, &optval
,
2108 sizeof optval
, sizeof optval
);
2111 if ((optval
% 2) != 0) {
2112 /* the API assumes even offset values */
2114 } else if (so
->so_proto
->pr_protocol
==
2116 if (optval
!= icmp6off
)
2119 in6p
->in6p_cksum
= optval
;
2123 if (so
->so_proto
->pr_protocol
== IPPROTO_ICMPV6
)
2126 optval
= in6p
->in6p_cksum
;
2128 soopt_from_kbuf(sopt
, &optval
, sizeof(optval
));
2138 error
= ENOPROTOOPT
;
2146 * Set up IP6 options in pcb for insertion in output packets or
2147 * specifying behavior of outgoing packets.
2150 ip6_pcbopts(struct ip6_pktopts
**pktopt
, struct mbuf
*m
,
2151 struct socket
*so
, struct sockopt
*sopt
)
2154 struct ip6_pktopts
*opt
= *pktopt
;
2157 /* turn off any old options. */
2160 if (opt
->ip6po_pktinfo
|| opt
->ip6po_nexthop
||
2161 opt
->ip6po_hbh
|| opt
->ip6po_dest1
|| opt
->ip6po_dest2
||
2162 opt
->ip6po_rhinfo
.ip6po_rhi_rthdr
)
2163 kprintf("ip6_pcbopts: all specified options are cleared.\n");
2165 ip6_clearpktopts(opt
, -1);
2167 opt
= kmalloc(sizeof(*opt
), M_IP6OPT
, M_WAITOK
);
2170 if (!m
|| m
->m_len
== 0) {
2172 * Only turning off any previous options, regardless of
2173 * whether the opt is just created or given.
2175 kfree(opt
, M_IP6OPT
);
2179 /* set options specified by user. */
2180 if ((error
= ip6_setpktoptions(m
, opt
, NULL
, so
->so_proto
->pr_protocol
, priv
)) != 0) {
2181 ip6_clearpktopts(opt
, -1); /* XXX: discard all options */
2182 kfree(opt
, M_IP6OPT
);
2191 * Below three functions are introduced by merge to RFC3542
2195 ip6_getpcbopt(struct ip6_pktopts
*pktopt
, int optname
, struct sockopt
*sopt
)
2197 void *optdata
= NULL
;
2199 struct ip6_ext
*ip6e
;
2201 struct in6_pktinfo null_pktinfo
;
2202 int deftclass
= 0, on
;
2203 int defminmtu
= IP6PO_MINMTU_MCASTONLY
;
2204 int defpreftemp
= IP6PO_TEMPADDR_SYSTEM
;
2208 if (pktopt
&& pktopt
->ip6po_pktinfo
)
2209 optdata
= (void *)pktopt
->ip6po_pktinfo
;
2211 /* XXX: we don't have to do this every time... */
2212 bzero(&null_pktinfo
, sizeof(null_pktinfo
));
2213 optdata
= (void *)&null_pktinfo
;
2215 optdatalen
= sizeof(struct in6_pktinfo
);
2218 if (pktopt
&& pktopt
->ip6po_tclass
>= 0)
2219 optdata
= (void *)&pktopt
->ip6po_tclass
;
2221 optdata
= (void *)&deftclass
;
2222 optdatalen
= sizeof(int);
2225 if (pktopt
&& pktopt
->ip6po_hbh
) {
2226 optdata
= (void *)pktopt
->ip6po_hbh
;
2227 ip6e
= (struct ip6_ext
*)pktopt
->ip6po_hbh
;
2228 optdatalen
= (ip6e
->ip6e_len
+ 1) << 3;
2232 if (pktopt
&& pktopt
->ip6po_rthdr
) {
2233 optdata
= (void *)pktopt
->ip6po_rthdr
;
2234 ip6e
= (struct ip6_ext
*)pktopt
->ip6po_rthdr
;
2235 optdatalen
= (ip6e
->ip6e_len
+ 1) << 3;
2238 case IPV6_RTHDRDSTOPTS
:
2239 if (pktopt
&& pktopt
->ip6po_dest1
) {
2240 optdata
= (void *)pktopt
->ip6po_dest1
;
2241 ip6e
= (struct ip6_ext
*)pktopt
->ip6po_dest1
;
2242 optdatalen
= (ip6e
->ip6e_len
+ 1) << 3;
2246 if (pktopt
&& pktopt
->ip6po_dest2
) {
2247 optdata
= (void *)pktopt
->ip6po_dest2
;
2248 ip6e
= (struct ip6_ext
*)pktopt
->ip6po_dest2
;
2249 optdatalen
= (ip6e
->ip6e_len
+ 1) << 3;
2253 if (pktopt
&& pktopt
->ip6po_nexthop
) {
2254 optdata
= (void *)pktopt
->ip6po_nexthop
;
2255 optdatalen
= pktopt
->ip6po_nexthop
->sa_len
;
2258 case IPV6_USE_MIN_MTU
:
2260 optdata
= (void *)&pktopt
->ip6po_minmtu
;
2262 optdata
= (void *)&defminmtu
;
2263 optdatalen
= sizeof(int);
2266 if (pktopt
&& ((pktopt
->ip6po_flags
) & IP6PO_DONTFRAG
))
2270 optdata
= (void *)&on
;
2271 optdatalen
= sizeof(on
);
2273 case IPV6_PREFER_TEMPADDR
:
2275 optdata
= (void *)&pktopt
->ip6po_prefer_tempaddr
;
2277 optdata
= (void *)&defpreftemp
;
2278 optdatalen
= sizeof(int);
2280 default: /* should not happen */
2282 panic("ip6_getpcbopt: unexpected option");
2284 return (ENOPROTOOPT
);
2287 soopt_from_kbuf(sopt
, optdata
, optdatalen
);
2293 * initialize ip6_pktopts. beware that there are non-zero default values in
2298 ip6_pcbopt(int optname
, u_char
*buf
, int len
, struct ip6_pktopts
**pktopt
, int uproto
)
2300 struct ip6_pktopts
*opt
;
2302 if (*pktopt
== NULL
) {
2303 *pktopt
= kmalloc(sizeof(*opt
), M_IP6OPT
, M_WAITOK
);
2304 init_ip6pktopts(*pktopt
);
2308 return (ip6_setpktoption(optname
, buf
, len
, opt
, 1, 0, uproto
, priv
));
2312 * initialize ip6_pktopts. beware that there are non-zero default values in
2316 init_ip6pktopts(struct ip6_pktopts
*opt
)
2319 bzero(opt
, sizeof(*opt
));
2320 opt
->ip6po_hlim
= -1; /* -1 means default hop limit */
2321 opt
->ip6po_tclass
= -1; /* -1 means default traffic class */
2322 opt
->ip6po_minmtu
= IP6PO_MINMTU_MCASTONLY
;
2323 opt
->ip6po_prefer_tempaddr
= IP6PO_TEMPADDR_SYSTEM
;
2327 ip6_clearpktopts(struct ip6_pktopts
*pktopt
, int optname
)
2332 if (optname
== -1 || optname
== IPV6_PKTINFO
) {
2333 if (pktopt
->ip6po_pktinfo
)
2334 kfree(pktopt
->ip6po_pktinfo
, M_IP6OPT
);
2335 pktopt
->ip6po_pktinfo
= NULL
;
2337 if (optname
== -1 || optname
== IPV6_HOPLIMIT
)
2338 pktopt
->ip6po_hlim
= -1;
2339 if (optname
== -1 || optname
== IPV6_TCLASS
)
2340 pktopt
->ip6po_tclass
= -1;
2341 if (optname
== -1 || optname
== IPV6_NEXTHOP
) {
2342 if (pktopt
->ip6po_nextroute
.ro_rt
) {
2343 RTFREE(pktopt
->ip6po_nextroute
.ro_rt
);
2344 pktopt
->ip6po_nextroute
.ro_rt
= NULL
;
2346 if (pktopt
->ip6po_nexthop
)
2347 kfree(pktopt
->ip6po_nexthop
, M_IP6OPT
);
2348 pktopt
->ip6po_nexthop
= NULL
;
2350 if (optname
== -1 || optname
== IPV6_HOPOPTS
) {
2351 if (pktopt
->ip6po_hbh
)
2352 kfree(pktopt
->ip6po_hbh
, M_IP6OPT
);
2353 pktopt
->ip6po_hbh
= NULL
;
2355 if (optname
== -1 || optname
== IPV6_RTHDRDSTOPTS
) {
2356 if (pktopt
->ip6po_dest1
)
2357 kfree(pktopt
->ip6po_dest1
, M_IP6OPT
);
2358 pktopt
->ip6po_dest1
= NULL
;
2360 if (optname
== -1 || optname
== IPV6_RTHDR
) {
2361 if (pktopt
->ip6po_rhinfo
.ip6po_rhi_rthdr
)
2362 kfree(pktopt
->ip6po_rhinfo
.ip6po_rhi_rthdr
, M_IP6OPT
);
2363 pktopt
->ip6po_rhinfo
.ip6po_rhi_rthdr
= NULL
;
2364 if (pktopt
->ip6po_route
.ro_rt
) {
2365 RTFREE(pktopt
->ip6po_route
.ro_rt
);
2366 pktopt
->ip6po_route
.ro_rt
= NULL
;
2369 if (optname
== -1 || optname
== IPV6_DSTOPTS
) {
2370 if (pktopt
->ip6po_dest2
)
2371 kfree(pktopt
->ip6po_dest2
, M_IP6OPT
);
2372 pktopt
->ip6po_dest2
= NULL
;
2376 #define PKTOPT_EXTHDRCPY(type) \
2380 (((struct ip6_ext *)src->type)->ip6e_len + 1) << 3;\
2381 dst->type = kmalloc(hlen, M_IP6OPT, canwait);\
2382 if (dst->type == NULL)\
2384 bcopy(src->type, dst->type, hlen);\
2388 struct ip6_pktopts
*
2389 ip6_copypktopts(struct ip6_pktopts
*src
, int canwait
)
2391 struct ip6_pktopts
*dst
;
2394 kprintf("ip6_clearpktopts: invalid argument\n");
2398 dst
= kmalloc(sizeof(*dst
), M_IP6OPT
, canwait
| M_ZERO
);
2402 dst
->ip6po_hlim
= src
->ip6po_hlim
;
2403 if (src
->ip6po_pktinfo
) {
2404 dst
->ip6po_pktinfo
= kmalloc(sizeof(*dst
->ip6po_pktinfo
),
2406 if (dst
->ip6po_pktinfo
== NULL
)
2408 *dst
->ip6po_pktinfo
= *src
->ip6po_pktinfo
;
2410 if (src
->ip6po_nexthop
) {
2411 dst
->ip6po_nexthop
= kmalloc(src
->ip6po_nexthop
->sa_len
,
2413 if (dst
->ip6po_nexthop
== NULL
)
2415 bcopy(src
->ip6po_nexthop
, dst
->ip6po_nexthop
,
2416 src
->ip6po_nexthop
->sa_len
);
2418 PKTOPT_EXTHDRCPY(ip6po_hbh
);
2419 PKTOPT_EXTHDRCPY(ip6po_dest1
);
2420 PKTOPT_EXTHDRCPY(ip6po_dest2
);
2421 PKTOPT_EXTHDRCPY(ip6po_rthdr
); /* not copy the cached route */
2425 if (dst
->ip6po_pktinfo
) kfree(dst
->ip6po_pktinfo
, M_IP6OPT
);
2426 if (dst
->ip6po_nexthop
) kfree(dst
->ip6po_nexthop
, M_IP6OPT
);
2427 if (dst
->ip6po_hbh
) kfree(dst
->ip6po_hbh
, M_IP6OPT
);
2428 if (dst
->ip6po_dest1
) kfree(dst
->ip6po_dest1
, M_IP6OPT
);
2429 if (dst
->ip6po_dest2
) kfree(dst
->ip6po_dest2
, M_IP6OPT
);
2430 if (dst
->ip6po_rthdr
) kfree(dst
->ip6po_rthdr
, M_IP6OPT
);
2431 kfree(dst
, M_IP6OPT
);
2436 copypktopts(struct ip6_pktopts
*dst
, struct ip6_pktopts
*src
, int canwait
)
2438 if (dst
== NULL
|| src
== NULL
) {
2440 kprintf("ip6_clearpktopts: invalid argument\n");
2445 dst
->ip6po_hlim
= src
->ip6po_hlim
;
2446 dst
->ip6po_tclass
= src
->ip6po_tclass
;
2447 dst
->ip6po_flags
= src
->ip6po_flags
;
2448 if (src
->ip6po_pktinfo
) {
2449 dst
->ip6po_pktinfo
= kmalloc(sizeof(*dst
->ip6po_pktinfo
),
2451 if (dst
->ip6po_pktinfo
== NULL
)
2453 *dst
->ip6po_pktinfo
= *src
->ip6po_pktinfo
;
2455 if (src
->ip6po_nexthop
) {
2456 dst
->ip6po_nexthop
= kmalloc(src
->ip6po_nexthop
->sa_len
,
2458 if (dst
->ip6po_nexthop
== NULL
)
2460 bcopy(src
->ip6po_nexthop
, dst
->ip6po_nexthop
,
2461 src
->ip6po_nexthop
->sa_len
);
2463 PKTOPT_EXTHDRCPY(ip6po_hbh
);
2464 PKTOPT_EXTHDRCPY(ip6po_dest1
);
2465 PKTOPT_EXTHDRCPY(ip6po_dest2
);
2466 PKTOPT_EXTHDRCPY(ip6po_rthdr
); /* not copy the cached route */
2470 ip6_clearpktopts(dst
, -1);
2473 #undef PKTOPT_EXTHDRCPY
2476 ip6_freepcbopts(struct ip6_pktopts
*pktopt
)
2481 ip6_clearpktopts(pktopt
, -1);
2483 kfree(pktopt
, M_IP6OPT
);
2487 * Set the IP6 multicast options in response to user setsockopt().
2490 ip6_setmoptions(int optname
, struct ip6_moptions
**im6op
, struct mbuf
*m
)
2493 u_int loop
, ifindex
;
2494 struct ipv6_mreq
*mreq
;
2496 struct ip6_moptions
*im6o
= *im6op
;
2497 struct route_in6 ro
;
2498 struct sockaddr_in6
*dst
;
2499 struct in6_multi_mship
*imm
;
2500 struct thread
*td
= curthread
; /* XXX */
2504 * No multicast option buffer attached to the pcb;
2505 * allocate one and initialize to default values.
2507 im6o
= (struct ip6_moptions
*)
2508 kmalloc(sizeof(*im6o
), M_IPMOPTS
, M_WAITOK
);
2511 im6o
->im6o_multicast_ifp
= NULL
;
2512 im6o
->im6o_multicast_hlim
= ip6_defmcasthlim
;
2513 im6o
->im6o_multicast_loop
= IPV6_DEFAULT_MULTICAST_LOOP
;
2514 LIST_INIT(&im6o
->im6o_memberships
);
2519 case IPV6_MULTICAST_IF
:
2521 * Select the interface for outgoing multicast packets.
2523 if (m
== NULL
|| m
->m_len
!= sizeof(u_int
)) {
2527 bcopy(mtod(m
, u_int
*), &ifindex
, sizeof(ifindex
));
2528 if (ifindex
< 0 || if_index
< ifindex
) {
2529 error
= ENXIO
; /* XXX EINVAL? */
2532 ifp
= ifindex2ifnet
[ifindex
];
2533 if (ifp
== NULL
|| !(ifp
->if_flags
& IFF_MULTICAST
)) {
2534 error
= EADDRNOTAVAIL
;
2537 im6o
->im6o_multicast_ifp
= ifp
;
2540 case IPV6_MULTICAST_HOPS
:
2543 * Set the IP6 hoplimit for outgoing multicast packets.
2546 if (m
== NULL
|| m
->m_len
!= sizeof(int)) {
2550 bcopy(mtod(m
, u_int
*), &optval
, sizeof(optval
));
2551 if (optval
< -1 || optval
>= 256)
2553 else if (optval
== -1)
2554 im6o
->im6o_multicast_hlim
= ip6_defmcasthlim
;
2556 im6o
->im6o_multicast_hlim
= optval
;
2560 case IPV6_MULTICAST_LOOP
:
2562 * Set the loopback flag for outgoing multicast packets.
2563 * Must be zero or one.
2565 if (m
== NULL
|| m
->m_len
!= sizeof(u_int
)) {
2569 bcopy(mtod(m
, u_int
*), &loop
, sizeof(loop
));
2574 im6o
->im6o_multicast_loop
= loop
;
2577 case IPV6_JOIN_GROUP
:
2579 * Add a multicast group membership.
2580 * Group must be a valid IP6 multicast address.
2582 if (m
== NULL
|| m
->m_len
!= sizeof(struct ipv6_mreq
)) {
2586 mreq
= mtod(m
, struct ipv6_mreq
*);
2587 if (IN6_IS_ADDR_UNSPECIFIED(&mreq
->ipv6mr_multiaddr
)) {
2589 * We use the unspecified address to specify to accept
2590 * all multicast addresses. Only super user is allowed
2593 if (priv_check(td
, PRIV_ROOT
))
2598 } else if (!IN6_IS_ADDR_MULTICAST(&mreq
->ipv6mr_multiaddr
)) {
2604 * If the interface is specified, validate it.
2606 if (mreq
->ipv6mr_interface
< 0
2607 || if_index
< mreq
->ipv6mr_interface
) {
2608 error
= ENXIO
; /* XXX EINVAL? */
2612 * If no interface was explicitly specified, choose an
2613 * appropriate one according to the given multicast address.
2615 if (mreq
->ipv6mr_interface
== 0) {
2617 * If the multicast address is in node-local scope,
2618 * the interface should be a loopback interface.
2619 * Otherwise, look up the routing table for the
2620 * address, and choose the outgoing interface.
2621 * XXX: is it a good approach?
2623 if (IN6_IS_ADDR_MC_NODELOCAL(&mreq
->ipv6mr_multiaddr
)) {
2627 dst
= (struct sockaddr_in6
*)&ro
.ro_dst
;
2628 bzero(dst
, sizeof(*dst
));
2629 dst
->sin6_len
= sizeof(struct sockaddr_in6
);
2630 dst
->sin6_family
= AF_INET6
;
2631 dst
->sin6_addr
= mreq
->ipv6mr_multiaddr
;
2632 rtalloc((struct route
*)&ro
);
2633 if (ro
.ro_rt
== NULL
) {
2634 error
= EADDRNOTAVAIL
;
2637 ifp
= ro
.ro_rt
->rt_ifp
;
2641 ifp
= ifindex2ifnet
[mreq
->ipv6mr_interface
];
2644 * See if we found an interface, and confirm that it
2645 * supports multicast
2647 if (ifp
== NULL
|| !(ifp
->if_flags
& IFF_MULTICAST
)) {
2648 error
= EADDRNOTAVAIL
;
2652 * Put interface index into the multicast address,
2653 * if the address has link-local scope.
2655 if (IN6_IS_ADDR_MC_LINKLOCAL(&mreq
->ipv6mr_multiaddr
)) {
2656 mreq
->ipv6mr_multiaddr
.s6_addr16
[1]
2657 = htons(mreq
->ipv6mr_interface
);
2660 * See if the membership already exists.
2662 for (imm
= im6o
->im6o_memberships
.lh_first
;
2663 imm
!= NULL
; imm
= imm
->i6mm_chain
.le_next
)
2664 if (imm
->i6mm_maddr
->in6m_ifp
== ifp
&&
2665 IN6_ARE_ADDR_EQUAL(&imm
->i6mm_maddr
->in6m_addr
,
2666 &mreq
->ipv6mr_multiaddr
))
2673 * Everything looks good; add a new record to the multicast
2674 * address list for the given interface.
2676 imm
= kmalloc(sizeof(*imm
), M_IPMADDR
, M_WAITOK
);
2677 if ((imm
->i6mm_maddr
=
2678 in6_addmulti(&mreq
->ipv6mr_multiaddr
, ifp
, &error
)) == NULL
) {
2679 kfree(imm
, M_IPMADDR
);
2682 LIST_INSERT_HEAD(&im6o
->im6o_memberships
, imm
, i6mm_chain
);
2685 case IPV6_LEAVE_GROUP
:
2687 * Drop a multicast group membership.
2688 * Group must be a valid IP6 multicast address.
2690 if (m
== NULL
|| m
->m_len
!= sizeof(struct ipv6_mreq
)) {
2694 mreq
= mtod(m
, struct ipv6_mreq
*);
2695 if (IN6_IS_ADDR_UNSPECIFIED(&mreq
->ipv6mr_multiaddr
)) {
2696 if (priv_check(td
, PRIV_ROOT
)) {
2700 } else if (!IN6_IS_ADDR_MULTICAST(&mreq
->ipv6mr_multiaddr
)) {
2705 * If an interface address was specified, get a pointer
2706 * to its ifnet structure.
2708 if (mreq
->ipv6mr_interface
< 0
2709 || if_index
< mreq
->ipv6mr_interface
) {
2710 error
= ENXIO
; /* XXX EINVAL? */
2713 ifp
= ifindex2ifnet
[mreq
->ipv6mr_interface
];
2715 * Put interface index into the multicast address,
2716 * if the address has link-local scope.
2718 if (IN6_IS_ADDR_MC_LINKLOCAL(&mreq
->ipv6mr_multiaddr
)) {
2719 mreq
->ipv6mr_multiaddr
.s6_addr16
[1]
2720 = htons(mreq
->ipv6mr_interface
);
2723 * Find the membership in the membership list.
2725 for (imm
= im6o
->im6o_memberships
.lh_first
;
2726 imm
!= NULL
; imm
= imm
->i6mm_chain
.le_next
) {
2728 imm
->i6mm_maddr
->in6m_ifp
== ifp
) &&
2729 IN6_ARE_ADDR_EQUAL(&imm
->i6mm_maddr
->in6m_addr
,
2730 &mreq
->ipv6mr_multiaddr
))
2734 /* Unable to resolve interface */
2735 error
= EADDRNOTAVAIL
;
2739 * Give up the multicast address record to which the
2740 * membership points.
2742 LIST_REMOVE(imm
, i6mm_chain
);
2743 in6_delmulti(imm
->i6mm_maddr
);
2744 kfree(imm
, M_IPMADDR
);
2753 * If all options have default values, no need to keep the mbuf.
2755 if (im6o
->im6o_multicast_ifp
== NULL
&&
2756 im6o
->im6o_multicast_hlim
== ip6_defmcasthlim
&&
2757 im6o
->im6o_multicast_loop
== IPV6_DEFAULT_MULTICAST_LOOP
&&
2758 im6o
->im6o_memberships
.lh_first
== NULL
) {
2759 kfree(*im6op
, M_IPMOPTS
);
2767 * Return the IP6 multicast options in response to user getsockopt().
2770 ip6_getmoptions(int optname
, struct ip6_moptions
*im6o
, struct mbuf
**mp
)
2772 u_int
*hlim
, *loop
, *ifindex
;
2774 *mp
= m_get(MB_WAIT
, MT_HEADER
); /* XXX */
2778 case IPV6_MULTICAST_IF
:
2779 ifindex
= mtod(*mp
, u_int
*);
2780 (*mp
)->m_len
= sizeof(u_int
);
2781 if (im6o
== NULL
|| im6o
->im6o_multicast_ifp
== NULL
)
2784 *ifindex
= im6o
->im6o_multicast_ifp
->if_index
;
2787 case IPV6_MULTICAST_HOPS
:
2788 hlim
= mtod(*mp
, u_int
*);
2789 (*mp
)->m_len
= sizeof(u_int
);
2791 *hlim
= ip6_defmcasthlim
;
2793 *hlim
= im6o
->im6o_multicast_hlim
;
2796 case IPV6_MULTICAST_LOOP
:
2797 loop
= mtod(*mp
, u_int
*);
2798 (*mp
)->m_len
= sizeof(u_int
);
2800 *loop
= ip6_defmcasthlim
;
2802 *loop
= im6o
->im6o_multicast_loop
;
2806 return (EOPNOTSUPP
);
2811 * Discard the IP6 multicast options.
2814 ip6_freemoptions(struct ip6_moptions
*im6o
)
2816 struct in6_multi_mship
*imm
;
2821 while ((imm
= im6o
->im6o_memberships
.lh_first
) != NULL
) {
2822 LIST_REMOVE(imm
, i6mm_chain
);
2823 if (imm
->i6mm_maddr
)
2824 in6_delmulti(imm
->i6mm_maddr
);
2825 kfree(imm
, M_IPMADDR
);
2827 kfree(im6o
, M_IPMOPTS
);
2831 * Set a particular packet option, as a sticky option or an ancillary data
2832 * item. "len" can be 0 only when it's a sticky option.
2833 * We have 4 cases of combination of "sticky" and "cmsg":
2834 * "sticky=0, cmsg=0": impossible
2835 * "sticky=0, cmsg=1": RFC2292 or RFC3542 ancillary data
2836 * "sticky=1, cmsg=0": RFC3542 socket option
2837 * "sticky=1, cmsg=1": RFC2292 socket option
2840 ip6_setpktoption(int optname
, u_char
*buf
, int len
, struct ip6_pktopts
*opt
,
2841 int sticky
, int cmsg
, int uproto
, int priv
)
2843 int minmtupolicy
, preftemp
;
2846 if (!sticky
&& !cmsg
) {
2847 kprintf("ip6_setpktoption: impossible case\n");
2852 * IPV6_2292xxx is for backward compatibility to RFC2292, and should
2853 * not be specified in the context of RFC3542. Conversely,
2854 * RFC3542 types should not be specified in the context of RFC2292.
2858 case IPV6_2292PKTINFO
:
2859 case IPV6_2292HOPLIMIT
:
2860 case IPV6_2292NEXTHOP
:
2861 case IPV6_2292HOPOPTS
:
2862 case IPV6_2292DSTOPTS
:
2863 case IPV6_2292RTHDR
:
2864 case IPV6_2292PKTOPTIONS
:
2865 return (ENOPROTOOPT
);
2868 if (sticky
&& cmsg
) {
2875 case IPV6_RTHDRDSTOPTS
:
2877 case IPV6_USE_MIN_MTU
:
2880 case IPV6_PREFER_TEMPADDR
: /* XXX: not an RFC3542 option */
2881 return (ENOPROTOOPT
);
2886 case IPV6_2292PKTINFO
:
2889 struct in6_pktinfo
*pktinfo
;
2890 if (len
!= sizeof(struct in6_pktinfo
))
2892 pktinfo
= (struct in6_pktinfo
*)buf
;
2895 * An application can clear any sticky IPV6_PKTINFO option by
2896 * doing a "regular" setsockopt with ipi6_addr being
2897 * in6addr_any and ipi6_ifindex being zero.
2898 * [RFC 3542, Section 6]
2900 if (optname
== IPV6_PKTINFO
&& opt
->ip6po_pktinfo
&&
2901 pktinfo
->ipi6_ifindex
== 0 &&
2902 IN6_IS_ADDR_UNSPECIFIED(&pktinfo
->ipi6_addr
)) {
2903 ip6_clearpktopts(opt
, optname
);
2907 if (uproto
== IPPROTO_TCP
&& optname
== IPV6_PKTINFO
&&
2908 sticky
&& !IN6_IS_ADDR_UNSPECIFIED(&pktinfo
->ipi6_addr
)) {
2912 /* validate the interface index if specified. */
2913 if (pktinfo
->ipi6_ifindex
> if_index
||
2914 pktinfo
->ipi6_ifindex
< 0) {
2918 * Check if the requested source address is indeed a
2919 * unicast address assigned to the node, and can be
2920 * used as the packet's source address.
2922 if (opt
->ip6po_pktinfo
!= NULL
&&
2923 !IN6_IS_ADDR_UNSPECIFIED(&opt
->ip6po_pktinfo
->ipi6_addr
)) {
2924 struct in6_ifaddr
*ia6
;
2925 struct sockaddr_in6 sin6
;
2927 bzero(&sin6
, sizeof(sin6
));
2928 sin6
.sin6_len
= sizeof(sin6
);
2929 sin6
.sin6_family
= AF_INET6
;
2931 opt
->ip6po_pktinfo
->ipi6_addr
;
2932 ia6
= (struct in6_ifaddr
*)ifa_ifwithaddr(sin6tosa(&sin6
));
2934 (ia6
->ia6_flags
& (IN6_IFF_ANYCAST
|
2935 IN6_IFF_NOTREADY
)) != 0)
2936 return (EADDRNOTAVAIL
);
2940 * We store the address anyway, and let in6_selectsrc()
2941 * validate the specified address. This is because ipi6_addr
2942 * may not have enough information about its scope zone, and
2943 * we may need additional information (such as outgoing
2944 * interface or the scope zone of a destination address) to
2945 * disambiguate the scope.
2946 * XXX: the delay of the validation may confuse the
2947 * application when it is used as a sticky option.
2949 if (opt
->ip6po_pktinfo
== NULL
) {
2950 opt
->ip6po_pktinfo
= kmalloc(sizeof(*pktinfo
),
2951 M_IP6OPT
, M_NOWAIT
);
2952 if (opt
->ip6po_pktinfo
== NULL
)
2955 bcopy(pktinfo
, opt
->ip6po_pktinfo
, sizeof(*pktinfo
));
2959 case IPV6_2292HOPLIMIT
:
2965 * RFC 3542 deprecated the usage of sticky IPV6_HOPLIMIT
2966 * to simplify the ordering among hoplimit options.
2968 if (optname
== IPV6_HOPLIMIT
&& sticky
)
2969 return (ENOPROTOOPT
);
2971 if (len
!= sizeof(int))
2974 if (*hlimp
< -1 || *hlimp
> 255)
2977 opt
->ip6po_hlim
= *hlimp
;
2985 if (len
!= sizeof(int))
2987 tclass
= *(int *)buf
;
2988 if (tclass
< -1 || tclass
> 255)
2991 opt
->ip6po_tclass
= tclass
;
2995 case IPV6_2292NEXTHOP
:
3000 if (len
== 0) { /* just remove the option */
3001 ip6_clearpktopts(opt
, IPV6_NEXTHOP
);
3005 /* check if cmsg_len is large enough for sa_len */
3006 if (len
< sizeof(struct sockaddr
) || len
< *buf
)
3009 switch (((struct sockaddr
*)buf
)->sa_family
) {
3012 struct sockaddr_in6
*sa6
= (struct sockaddr_in6
*)buf
;
3015 if (sa6
->sin6_len
!= sizeof(struct sockaddr_in6
))
3018 if (IN6_IS_ADDR_UNSPECIFIED(&sa6
->sin6_addr
) ||
3019 IN6_IS_ADDR_MULTICAST(&sa6
->sin6_addr
)) {
3024 case AF_LINK
: /* should eventually be supported */
3026 return (EAFNOSUPPORT
);
3029 /* turn off the previous option, then set the new option. */
3030 ip6_clearpktopts(opt
, IPV6_NEXTHOP
);
3031 opt
->ip6po_nexthop
= kmalloc(*buf
, M_IP6OPT
, M_NOWAIT
);
3032 if (opt
->ip6po_nexthop
== NULL
)
3034 bcopy(buf
, opt
->ip6po_nexthop
, *buf
);
3037 case IPV6_2292HOPOPTS
:
3040 struct ip6_hbh
*hbh
;
3044 * XXX: We don't allow a non-privileged user to set ANY HbH
3045 * options, since per-option restriction has too much
3051 ip6_clearpktopts(opt
, IPV6_HOPOPTS
);
3052 break; /* just remove the option */
3055 /* message length validation */
3056 if (len
< sizeof(struct ip6_hbh
))
3058 hbh
= (struct ip6_hbh
*)buf
;
3059 hbhlen
= (hbh
->ip6h_len
+ 1) << 3;
3063 /* turn off the previous option, then set the new option. */
3064 ip6_clearpktopts(opt
, IPV6_HOPOPTS
);
3065 opt
->ip6po_hbh
= kmalloc(hbhlen
, M_IP6OPT
, M_NOWAIT
);
3066 if (opt
->ip6po_hbh
== NULL
)
3068 bcopy(hbh
, opt
->ip6po_hbh
, hbhlen
);
3073 case IPV6_2292DSTOPTS
:
3075 case IPV6_RTHDRDSTOPTS
:
3077 struct ip6_dest
*dest
, **newdest
= NULL
;
3083 ip6_clearpktopts(opt
, optname
);
3084 break; /* just remove the option */
3087 /* message length validation */
3088 if (len
< sizeof(struct ip6_dest
))
3090 dest
= (struct ip6_dest
*)buf
;
3091 destlen
= (dest
->ip6d_len
+ 1) << 3;
3096 * Determine the position that the destination options header
3097 * should be inserted; before or after the routing header.
3100 case IPV6_2292DSTOPTS
:
3102 * The old advacned API is ambiguous on this point.
3103 * Our approach is to determine the position based
3104 * according to the existence of a routing header.
3105 * Note, however, that this depends on the order of the
3106 * extension headers in the ancillary data; the 1st
3107 * part of the destination options header must appear
3108 * before the routing header in the ancillary data,
3110 * RFC3542 solved the ambiguity by introducing
3111 * separate ancillary data or option types.
3113 if (opt
->ip6po_rthdr
== NULL
)
3114 newdest
= &opt
->ip6po_dest1
;
3116 newdest
= &opt
->ip6po_dest2
;
3118 case IPV6_RTHDRDSTOPTS
:
3119 newdest
= &opt
->ip6po_dest1
;
3122 newdest
= &opt
->ip6po_dest2
;
3126 /* turn off the previous option, then set the new option. */
3127 ip6_clearpktopts(opt
, optname
);
3128 *newdest
= kmalloc(destlen
, M_IP6OPT
, M_NOWAIT
);
3129 if (*newdest
== NULL
)
3131 bcopy(dest
, *newdest
, destlen
);
3136 case IPV6_2292RTHDR
:
3139 struct ip6_rthdr
*rth
;
3143 ip6_clearpktopts(opt
, IPV6_RTHDR
);
3144 break; /* just remove the option */
3147 /* message length validation */
3148 if (len
< sizeof(struct ip6_rthdr
))
3150 rth
= (struct ip6_rthdr
*)buf
;
3151 rthlen
= (rth
->ip6r_len
+ 1) << 3;
3155 switch (rth
->ip6r_type
) {
3157 return (EINVAL
); /* not supported */
3160 /* turn off the previous option */
3161 ip6_clearpktopts(opt
, IPV6_RTHDR
);
3162 opt
->ip6po_rthdr
= kmalloc(rthlen
, M_IP6OPT
, M_NOWAIT
);
3163 if (opt
->ip6po_rthdr
== NULL
)
3165 bcopy(rth
, opt
->ip6po_rthdr
, rthlen
);
3170 case IPV6_USE_MIN_MTU
:
3171 if (len
!= sizeof(int))
3173 minmtupolicy
= *(int *)buf
;
3174 if (minmtupolicy
!= IP6PO_MINMTU_MCASTONLY
&&
3175 minmtupolicy
!= IP6PO_MINMTU_DISABLE
&&
3176 minmtupolicy
!= IP6PO_MINMTU_ALL
) {
3179 opt
->ip6po_minmtu
= minmtupolicy
;
3183 if (len
!= sizeof(int))
3186 if (uproto
== IPPROTO_TCP
|| *(int *)buf
== 0) {
3188 * we ignore this option for TCP sockets.
3189 * (RFC3542 leaves this case unspecified.)
3191 opt
->ip6po_flags
&= ~IP6PO_DONTFRAG
;
3193 opt
->ip6po_flags
|= IP6PO_DONTFRAG
;
3196 case IPV6_PREFER_TEMPADDR
:
3197 if (len
!= sizeof(int))
3199 preftemp
= *(int *)buf
;
3200 if (preftemp
!= IP6PO_TEMPADDR_SYSTEM
&&
3201 preftemp
!= IP6PO_TEMPADDR_NOTPREFER
&&
3202 preftemp
!= IP6PO_TEMPADDR_PREFER
) {
3205 opt
->ip6po_prefer_tempaddr
= preftemp
;
3209 return (ENOPROTOOPT
);
3210 } /* end of switch */
3217 * Set IPv6 outgoing packet options based on advanced API.
3220 ip6_setpktoptions(struct mbuf
*control
, struct ip6_pktopts
*opt
,
3221 struct ip6_pktopts
*stickyopt
, int uproto
, int priv
)
3223 struct cmsghdr
*cm
= NULL
;
3225 if (control
== NULL
|| opt
== NULL
)
3228 init_ip6pktopts(opt
);
3231 * XXX: Currently, we assume all the optional information is stored
3238 * If stickyopt is provided, make a local copy of the options
3239 * for this particular packet, then override them by ancillary
3241 * XXX: copypktopts() does not copy the cached route to a next
3242 * hop (if any). This is not very good in terms of efficiency,
3243 * but we can allow this since this option should be rarely
3246 if ((error
= copypktopts(opt
, stickyopt
, M_NOWAIT
)) != 0)
3251 * XXX: Currently, we assume all the optional information is stored
3254 if (control
->m_next
)
3257 for (; control
->m_len
; control
->m_data
+= CMSG_ALIGN(cm
->cmsg_len
),
3258 control
->m_len
-= CMSG_ALIGN(cm
->cmsg_len
)) {
3261 if (control
->m_len
< CMSG_LEN(0))
3264 cm
= mtod(control
, struct cmsghdr
*);
3265 if (cm
->cmsg_len
== 0 || cm
->cmsg_len
> control
->m_len
)
3267 if (cm
->cmsg_level
!= IPPROTO_IPV6
)
3270 error
= ip6_setpktoption(cm
->cmsg_type
, CMSG_DATA(cm
),
3271 cm
->cmsg_len
- CMSG_LEN(0), opt
, 0, 1, uproto
, priv
);
3280 * Routine called from ip6_output() to loop back a copy of an IP6 multicast
3281 * packet to the input queue of a specified interface. Note that this
3282 * calls the output routine of the loopback "driver", but with an interface
3283 * pointer that might NOT be &loif -- easier than replicating that code here.
3286 ip6_mloopback(struct ifnet
*ifp
, struct mbuf
*m
, struct sockaddr_in6
*dst
)
3289 struct ip6_hdr
*ip6
;
3291 copym
= m_copy(m
, 0, M_COPYALL
);
3296 * Make sure to deep-copy IPv6 header portion in case the data
3297 * is in an mbuf cluster, so that we can safely override the IPv6
3298 * header portion later.
3300 if ((copym
->m_flags
& M_EXT
) != 0 ||
3301 copym
->m_len
< sizeof(struct ip6_hdr
)) {
3302 copym
= m_pullup(copym
, sizeof(struct ip6_hdr
));
3308 if (copym
->m_len
< sizeof(*ip6
)) {
3314 ip6
= mtod(copym
, struct ip6_hdr
*);
3316 * clear embedded scope identifiers if necessary.
3317 * in6_clearscope will touch the addresses only when necessary.
3319 in6_clearscope(&ip6
->ip6_src
);
3320 in6_clearscope(&ip6
->ip6_dst
);
3322 if_simloop(ifp
, copym
, dst
->sin6_family
, 0);
3326 * Separate the IPv6 header from the payload into its own mbuf.
3328 * Returns the new mbuf chain or the original mbuf if no payload.
3329 * Returns NULL if can't allocate new mbuf for header.
3331 static struct mbuf
*
3332 ip6_splithdr(struct mbuf
*m
)
3336 if (m
->m_len
<= sizeof(struct ip6_hdr
)) /* no payload */
3339 MGETHDR(mh
, MB_DONTWAIT
, MT_HEADER
);
3342 mh
->m_len
= sizeof(struct ip6_hdr
);
3343 M_MOVE_PKTHDR(mh
, m
);
3344 MH_ALIGN(mh
, sizeof(struct ip6_hdr
));
3345 bcopy(mtod(m
, caddr_t
), mtod(mh
, caddr_t
), sizeof(struct ip6_hdr
));
3346 m
->m_data
+= sizeof(struct ip6_hdr
);
3347 m
->m_len
-= sizeof(struct ip6_hdr
);
3353 * Compute IPv6 extension header length.
3356 ip6_optlen(struct in6pcb
*in6p
)
3360 if (!in6p
->in6p_outputopts
)
3365 (((struct ip6_ext *)(x)) ? (((struct ip6_ext *)(x))->ip6e_len + 1) << 3 : 0)
3367 len
+= elen(in6p
->in6p_outputopts
->ip6po_hbh
);
3368 if (in6p
->in6p_outputopts
->ip6po_rthdr
)
3369 /* dest1 is valid with rthdr only */
3370 len
+= elen(in6p
->in6p_outputopts
->ip6po_dest1
);
3371 len
+= elen(in6p
->in6p_outputopts
->ip6po_rthdr
);
3372 len
+= elen(in6p
->in6p_outputopts
->ip6po_dest2
);