2 ## This file is part of the coreboot project.
4 ## Copyright (C) 2011 secunet Security Networks AG
6 ## This program is free software; you can redistribute it and/or modify
7 ## it under the terms of the GNU General Public License as published by
8 ## the Free Software Foundation; version 2 of the License.
10 ## This program is distributed in the hope that it will be useful,
11 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
12 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 ## GNU General Public License for more details.
16 GIT:=$(shell [ -e "$(top)/.git" ] && command -v git)
18 #######################################################################
19 # normalize Kconfig variables in a central place
20 CONFIG_CBFS_PREFIX:=$(call strip_quotes,$(CONFIG_CBFS_PREFIX))
21 CONFIG_FMDFILE:=$(call strip_quotes,$(CONFIG_FMDFILE))
23 #######################################################################
24 # misleadingly named, this is the coreboot version
25 ifeq ($(KERNELVERSION),)
26 ifeq ($(BUILD_TIMELESS),1)
27 export KERNELVERSION := TIMELESS
29 export KERNELVERSION := $(strip $(if $(GIT),\
30 $(shell git describe --dirty --always || git describe),\
31 $(if $(wildcard $(top)/.coreboot-version),\
32 $(shell cat $(top)/.coreboot-version),\
33 coreboot-unknown$(KERNELREVISION))))
37 #######################################################################
38 # Basic component discovery
39 MAINBOARDDIR=$(call strip_quotes,$(CONFIG_MAINBOARD_DIR))
42 ## Final build results, which CBFSTOOL uses to create the final
43 ## rom image file, are placed under $(objcbfs).
44 ## These typically have suffixes .debug .elf .bin and .map
45 export objcbfs := $(obj)/cbfs/$(CONFIG_CBFS_PREFIX)
47 ## Based on the active configuration, Makefile conditionally collects
48 ## the required assembly includes and saves them in a file.
49 ## Such files that do not have a clear one-to-one relation to a source
50 ## file under src/ are placed and built under $(objgenerated)
51 export objgenerated := $(obj)/generated
53 #######################################################################
54 # root rule to resolve if in build mode (ie. configuration exists)
55 real-target: $(obj)/config.h coreboot files_added
56 coreboot: build-dirs $(obj)/coreboot.rom $(obj)/cbfstool $(obj)/rmodtool $(obj)/ifwitool
58 # This target can be used in site local to run scripts or additional
59 # targets after the build completes by creating a Makefile.inc in the
60 # site-local directory with a target named 'build_complete::'
61 build_complete:: coreboot
62 printf "\nBuilt %s (%s)\n" $(CONFIG_MAINBOARD_DIR) \
63 $(CONFIG_MAINBOARD_PART_NUMBER)
65 # This target can be used to run rules after all files were added to CBFS,
66 # for example to process FMAP regions or the entire image.
67 files_added:: build_complete
69 #######################################################################
71 PHONY+= clean-abuild coreboot lint lint-stable build-dirs build_complete
73 #######################################################################
74 # root source directories of coreboot
75 subdirs-y := src/lib src/commonlib/ src/console src/device src/acpi
76 subdirs-y += src/ec/acpi $(wildcard src/ec/*/*) $(wildcard src/southbridge/*/*)
77 subdirs-y += $(wildcard src/soc/*/*) $(wildcard src/northbridge/*/*)
78 subdirs-y += src/superio
79 subdirs-y += $(wildcard src/drivers/*) $(wildcard src/drivers/*/*)
80 subdirs-y += src/cpu src/vendorcode
81 subdirs-y += util/cbfstool util/sconfig util/nvramtool util/broadcom
82 subdirs-y += util/futility util/marvell
83 subdirs-y += $(wildcard src/arch/*)
84 subdirs-y += src/mainboard/$(MAINBOARDDIR)
85 subdirs-y += payloads payloads/external
87 subdirs-y += site-local
89 #######################################################################
90 # Add source classes and their build options
91 classes-y := ramstage romstage bootblock postcar smm smmstub cpu_microcode libverstage verstage
93 # Add dynamic classes for rmodules
94 $(foreach supported_arch,$(ARCH_SUPPORTED), \
95 $(eval $(call define_class,rmodules_$(supported_arch),$(supported_arch))))
96 # Provide a macro to determine environment for free standing rmodules.
97 $(foreach supported_arch,$(ARCH_SUPPORTED), \
98 $(eval rmodules_$(supported_arch)-generic-ccopts += -D__RMODULE__))
100 #######################################################################
101 # Helper functions for math, strings, and various file placement matters.
102 # macros work on all formats understood by printf(1)
103 # values are space separated if using more than one value
105 # int-add: adds an arbitrary length list of integers
106 # int-subtract: subtracts the the second of two integers from the first
107 # int-multiply: multiplies an arbitrary length list of integers
108 # int-divide: divides the first integer by the second
109 # int-remainder: arithmetic remainder of the first number divided by the second
110 # int-lt: 1 if the first value is less than the second. 0 otherwise
111 # int-gt: 1 if the first values is greater than the second. 0 otherwise
112 # int-eq: 1 if the two values are equal. 0 otherwise
113 # int-align: align $1 to $2 units
114 # file-size: returns the filesize of the given file
115 # tolower: returns the value in all lowercase
116 # toupper: returns the value in all uppercase
117 # ws_to_under: returns the value with any whitespace changed to underscores
118 _toint=$(shell printf "%d" $1)
119 _int-add2=$(shell expr $(call _toint,$1) + $(call _toint,$2))
120 int-add=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-add,$(call _int-add2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
121 int-subtract=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) - $(call _toint,$(word 2,$1))))
122 _int-multiply2=$(shell expr $(call _toint,$1) \* $(call _toint,$2))
123 int-multiply=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-multiply,$(call _int-multiply2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
124 int-divide=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) / $(call _toint,$(word 2,$1))))
125 int-remainder=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) % $(call _toint,$(word 2,$1))))
126 int-lt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \< $(call _toint,$(word 2,$1))))
127 int-gt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \> $(call _toint,$(word 2,$1))))
128 int-eq=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) = $(call _toint,$(word 2,$1))))
129 int-align=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A + \( \( $$B - \( $$A % $$B \) \) % $$B \) )
130 file-size=$(shell cat $1 | wc -c)
131 tolower=$(shell echo '$1' | tr '[:upper:]' '[:lower:]')
132 toupper=$(shell echo '$1' | tr '[:lower:]' '[:upper:]')
133 ws_to_under=$(shell echo '$1' | tr ' \t' '_')
135 #######################################################################
136 # Helper functions for ramstage postprocess
143 # files-in-dir-recursive,dir,files
144 files-in-dir-recursive=$(filter $(1)%,$(2))
147 parent-dir=$(dir $(if $(patsubst /%,,$(1)),,/)$(subst $( ),/,$(strip $(subst /, ,$(1)))))
149 # filters out exactly the directory specified
150 # filter-out-dir,dir_to_keep,dirs
151 filter-out-dir=$(filter-out $(1),$(2))
153 # filters out dir_to_keep and all its parents
154 # filter-out-dirs,dir_to_keep,dirs
155 filter-out-dirs=$(if $(filter-out ./ /,$(1)),$(call filter-out-dirs,$(call parent-dir,$(1)),$(call filter-out-dir,$(1),$(2))),$(call filter-out-dir,$(1),$(2)))
158 dir-wildcards=$(addsuffix %,$(1))
160 # files-in-dir,dir,files
161 files-in-dir=$(filter-out $(call dir-wildcards,$(call filter-out-dirs,$(1),$(sort $(dir $(2))))),$(call files-in-dir-recursive,$(1),$(2)))
163 #######################################################################
164 # reduce command line length by linking the objects of each
165 # directory into an intermediate file
166 ramstage-postprocess=$$(eval DEPENDENCIES+=$$(addsuffix .d,$$(basename $(1)))) \
167 $(foreach d,$(sort $(dir $(filter-out %.ld,$(1)))), \
168 $(eval $(d)ramstage.a: $(call files-in-dir,$(d),$(filter-out %.ld,$(1))); rm -f $$@ && $(AR_ramstage) rcsT $$@ $$^ ) \
169 $(eval ramstage-objs:=$(d)ramstage.a $(filter-out $(filter-out %.ld, $(call files-in-dir,$(d),$(1))),$(ramstage-objs))))
171 bootblock-generic-ccopts += -D__PRE_RAM__ -D__BOOTBLOCK__
172 romstage-generic-ccopts += -D__PRE_RAM__ -D__ROMSTAGE__
173 ramstage-generic-ccopts += -D__RAMSTAGE__
174 ifeq ($(CONFIG_TRACE),y)
175 ramstage-c-ccopts += -finstrument-functions
177 ifeq ($(CONFIG_COVERAGE),y)
178 ramstage-c-ccopts += -fprofile-arcs -ftest-coverage
181 ifneq ($(UPDATED_SUBMODULES),1)
182 # try to fetch non-optional submodules if the source is under git
183 forgetthis:=$(if $(GIT),$(shell git submodule update --init))
184 ifeq ($(CONFIG_USE_BLOBS),y)
185 # this is necessary because 3rdparty/blobs is update=none, and so is ignored
186 # unless explicitly requested and enabled through --checkout
187 forgetthis:=$(if $(GIT),$(shell git submodule update --init --checkout 3rdparty/blobs))
189 export UPDATED_SUBMODULES:=1
192 ramstage-c-deps:=$$(OPTION_TABLE_H)
193 romstage-c-deps:=$$(OPTION_TABLE_H)
194 libverstage-c-deps:=$$(OPTION_TABLE_H)
195 verstage-c-deps:=$$(OPTION_TABLE_H)
196 bootblock-c-deps:=$$(OPTION_TABLE_H)
198 # Add handler to copy linker scripts
199 define generic-objs_ld_template_gen
200 de$(EMPTY)fine $(1)-objs_ld_template
201 $$(call src-to-obj,$1,$$(1).ld): $$(1).ld $(obj)/config.h
202 @printf " CP $$$$(subst $$$$(obj)/,,$$$$(@))\n"
203 $$(CC_$(1)) -MMD $$(CPPFLAGS_$(1)) $$($(1)-ld-ccopts) $(PREPROCESS_ONLY) -include $(obj)/config.h -MT $$$$@ -o $$$$@ $$$$<
207 # Add handler to deal with archives
208 define generic-objs_a_template_gen
209 de$(EMPTY)fine $(1)-objs_a_template
210 $$(call src-to-obj,$1,$$(1).a): $$(1).a
211 @printf " AR $$$$(subst $$$$(obj)/,,$$$$(@))\n"
212 $$$$(AR_$(1)) rcsT $$$$@.tmp $$$$<
217 # Add handler to add no rules for manual files
218 define generic-objs_manual_template_gen
222 #######################################################################
223 # Add handler to compile ACPI's ASL
224 # arg1: base file name
225 # arg2: y or n for including in cbfs. defaults to y
227 $(CONFIG_CBFS_PREFIX)/$(1).aml-file = $(obj)/$(1).aml
228 $(CONFIG_CBFS_PREFIX)/$(1).aml-type = raw
229 $(CONFIG_CBFS_PREFIX)/$(1).aml-compression = none
230 cbfs-files-$(if $(2),$(2),y) += $(CONFIG_CBFS_PREFIX)/$(1).aml
231 -include $(obj)/$(1).d
232 $(obj)/$(1).aml: $(src)/mainboard/$(MAINBOARDDIR)/$(1).asl $(obj)/config.h
233 @printf " IASL $$(subst $(top)/,,$$(@))\n"
234 $(CC_ramstage) -x assembler-with-cpp -E -MMD -MT $$(@) $$(CPPFLAGS_ramstage) -D__ACPI__ -P -include $(src)/include/kconfig.h -I$(obj) -I$(src) -I$(src)/include -I$(src)/arch/$(ARCHDIR-$(ARCH-ramstage-y))/include -I$(src)/mainboard/$(MAINBOARDDIR) $$< -o $$@
235 ifeq ($(CONFIG_IASL_WARNINGS_ARE_ERRORS),y)
236 cd $$(dir $$@); $(IASL) -we -p $$(notdir $$@) $$(notdir $$@)
238 cd $$(dir $$@); $(IASL) -p $$(notdir $$@) $$(notdir $$@)
240 if [ -z "$$$$($(IASL) -d $$@ 2>&1 | grep 'ACPI Warning')" ]; then echo " IASL $$@ disassembled correctly."; true; else echo "Error: Could not correctly disassemble $$@"; $(IASL) -d $$@; false; fi
243 #######################################################################
244 # Parse plaintext cmos defaults into binary format
246 # arg2: binary file name
247 cbfs-files-processor-nvramtool= \
248 $(eval $(2): $(1) $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout | $(objutil)/nvramtool/nvramtool ; \
249 printf " CREATE $(2) (from $(1))\n"; \
250 $(objutil)/nvramtool/nvramtool -y $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout -D $(2).tmp -p $(1) && \
253 #######################################################################
254 # Link VSA binary to ELF-ish stage
256 # arg2: binary file name
257 cbfs-files-processor-vsa= \
258 $(eval $(2): $(1) ; \
259 printf " CREATE $(2) (from $(1))\n"; \
260 $(OBJCOPY_ramstage) --set-start 0x20 --adjust-vma 0x60000 -I binary -O elf32-i386 -B i386 $(1) $(2).tmp && \
261 $(LD_ramstage) -m elf_i386 -e 0x60020 --section-start .data=0x60000 $(2).tmp -o $(2))
263 #######################################################################
264 # Reduce a .config file to its minimal representation
267 cbfs-files-processor-defconfig= \
268 $(eval $(2): $(1) $(obj)/build.h; \
269 printf " CREATE $(2) (from $(1))\n"; \
270 printf "\# This image was built using coreboot " > $(2).tmp && \
271 grep "\<COREBOOT_VERSION\>" $(obj)/build.h |cut -d\" -f2 >> $(2).tmp && \
272 $(MAKE) DOTCONFIG=$(1) DEFCONFIG=$(2).tmp2 savedefconfig && \
273 cat $(2).tmp2 >> $(2).tmp && \
275 \mv -f $(2).tmp $(2))
277 #######################################################################
278 # Add handler for arbitrary files in CBFS
279 $(call add-special-class,cbfs-files)
280 cbfs-files-handler= \
281 $(eval tmp-cbfs-method:=$(word 2, $(subst :, ,$($(2)-file)))) \
282 $(eval $(2)-file:=$(call strip_quotes,$(word 1, $(subst :, ,$($(2)-file))))) \
283 $(eval tmp-cbfs-file:= ) \
285 $(if $(wildcard $(1)$($(2)-file)), \
286 $(eval tmp-cbfs-file:= $(wildcard $(1)$($(2)-file))), \
287 $(eval tmp-cbfs-file:= $($(2)-file)))) \
288 $(if $(strip $($(2)-required)), \
289 $(if $(wildcard $(tmp-cbfs-file)),, \
290 $(info This build configuration requires $($(2)-required)) \
291 $(eval FAILBUILD:=1) \
293 $(if $(strip $($(2)-align)), \
294 $(if $(strip $($(2)-position)), \
295 $(info ERROR: It is not allowed to specify both alignment and position for $($(2)-file)) \
296 $(eval FAILBUILD:=1) \
298 $(eval _cbfs-bucket:=regular ) \
299 $(if $(strip $($(2)-position)), \
300 $(eval _cbfs-bucket:=fixed)) \
301 $(if $(strip $($(2)-align)), \
302 $(eval _cbfs-bucket:=aligned)) \
303 $(if $(tmp-cbfs-method), \
304 $(eval tmp-old-cbfs-file:=$(tmp-cbfs-file)) \
305 $(eval tmp-cbfs-file:=$(shell mkdir -p $(obj)/mainboard/$(MAINBOARDDIR); mktemp $(obj)/mainboard/$(MAINBOARDDIR)/cbfs-file.XXXXXX).out) \
306 $(call cbfs-files-processor-$(tmp-cbfs-method),$(tmp-old-cbfs-file),$(tmp-cbfs-file))) \
307 $(if $(tmp-cbfs-file), \
308 $(eval cbfs-files-$(_cbfs-bucket) += $(subst $(spc),*,$(tmp-cbfs-file)|$(2)|$($(2)-type)|$($(2)-compression)|$(strip $($(2)-position))|$($(2)-align)|$($(2)-options)))) \
309 $(eval $(2)-name:=) \
310 $(eval $(2)-type:=) \
311 $(eval $(2)-compression:=) \
312 $(eval $(2)-position:=) \
313 $(eval $(2)-required:=) \
314 $(eval $(2)-options:=) \
317 #######################################################################
318 # a variety of flags for our build
319 CBFS_COMPRESS_FLAG:=none
320 ifeq ($(CONFIG_COMPRESS_RAMSTAGE),y)
321 CBFS_COMPRESS_FLAG:=LZMA
324 CBFS_PAYLOAD_COMPRESS_FLAG:=none
325 ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y)
326 CBFS_PAYLOAD_COMPRESS_FLAG:=LZMA
329 CBFS_PRERAM_COMPRESS_FLAG:=none
330 ifeq ($(CONFIG_COMPRESS_PRERAM_STAGES),y)
331 CBFS_PRERAM_COMPRESS_FLAG:=LZ4
334 ifneq ($(CONFIG_LOCALVERSION),"")
335 export COREBOOT_EXTRA_VERSION := -$(call strip_quotes,$(CONFIG_LOCALVERSION))
338 CPPFLAGS_common := -Isrc -Isrc/include -Isrc/commonlib/include -I$(obj)
339 CPPFLAGS_common += -Isrc/device/oprom/include
340 VB_SOURCE ?= 3rdparty/vboot
341 CPPFLAGS_common += -I$(VB_SOURCE)/firmware/include
342 CPPFLAGS_common += -include $(src)/include/kconfig.h
343 CPPFLAGS_common += -I3rdparty
345 CFLAGS_common += -pipe -g -nostdinc
346 CFLAGS_common += -nostdlib -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes
347 CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs
348 CFLAGS_common += -Wstrict-aliasing -Wshadow -Wdate-time
349 CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer
350 CFLAGS_common += -ffunction-sections -fdata-sections
352 LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs
354 ifeq ($(CONFIG_COMPILER_GCC),y)
355 # cf. commit f69a99db (coreboot: x86: enable gc-sections)
356 CFLAGS_common += -Wno-unused-but-set-variable
359 ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y)
360 CFLAGS_common += -Werror
362 ifneq ($(GDB_DEBUG),)
368 additional-dirs := $(objutil)/cbfstool $(objutil)/romcc $(objutil)/ifdtool \
369 $(objutil)/ifdfake $(objutil)/options $(objutil)/amdfwtool \
370 $(objutil)/cbootimage $(objutil)/bimgtool
372 #######################################################################
373 # generate build support files
374 $(obj)/build.h: .xcompile
375 @printf " GEN build.h\n"
377 util/genbuild_h/genbuild_h.sh > $(obj)/build.ht
378 mv $(obj)/build.ht $(obj)/build.h
381 mkdir -p $(objcbfs) $(objgenerated)
383 #######################################################################
385 CBFSTOOL:=$(objutil)/cbfstool/cbfstool
386 FMAPTOOL:=$(objutil)/cbfstool/fmaptool
387 RMODTOOL:=$(objutil)/cbfstool/rmodtool
388 IFWITOOL:=$(objutil)/cbfstool/ifwitool
390 $(obj)/cbfstool: $(CBFSTOOL)
393 $(obj)/fmaptool: $(FMAPTOOL)
396 $(obj)/rmodtool: $(RMODTOOL)
399 $(obj)/ifwitool: $(IFWITOOL)
402 _WINCHECK=$(shell uname -o 2> /dev/null)
404 ifeq ($(_WINCHECK),Msys)
405 STACK=-Wl,--stack,16384000
407 ifeq ($(_WINCHECK),Cygwin)
408 STACK=-Wl,--stack,16384000
411 # this allows ccache to prepend itself
412 # (ccache handling happens first)
413 ROMCC_BIN= $(objutil)/romcc/romcc
415 $(ROMCC_BIN): $(top)/util/romcc/romcc.c
416 @printf " HOSTCC $(subst $(obj)/,,$(@)) (this may take a while)\n"
417 @# Note: Adding -O2 here might cause problems. For details see:
418 @# http://www.coreboot.org/pipermail/coreboot/2010-February/055825.html
419 $(HOSTCC) -g $(STACK) -Wall -o $@ $<
421 IFDTOOL:=$(objutil)/ifdtool/ifdtool
422 $(IFDTOOL): $(top)/util/ifdtool/ifdtool.c
423 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
424 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
426 IFDFAKE:=$(objutil)/ifdfake/ifdfake
427 $(IFDFAKE): $(top)/util/ifdfake/ifdfake.c
428 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
429 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
431 AMDFWTOOL:=$(objutil)/amdfwtool/amdfwtool
432 $(AMDFWTOOL): $(top)/util/amdfwtool/amdfwtool.c
433 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
434 $(HOSTCC) $(HOSTCFLAGS) -DCONFIG_ROM_SIZE=$(CONFIG_ROM_SIZE) -o $@ $<
436 CBOOTIMAGE:=$(objutil)/cbootimage/cbootimage
438 FUTILITY?=$(objutil)/futility/futility
440 subdirs-y += util/nvidia
442 BIMGTOOL:=$(objutil)/bimgtool/bimgtool
443 $(BIMGTOOL): $(top)/util/bimgtool/bimgtool.c
444 @printf " HOSTCC $(subst $(obj)/,,$(@))\n"
445 $(HOSTCC) $(HOSTCFLAGS) -o $@ $<
447 $(obj)/config.h: $(objutil)/kconfig/conf
449 #######################################################################
450 # needed objects that every mainboard uses
451 # Creation of these is architecture and mainboard independent
452 $(obj)/mainboard/$(MAINBOARDDIR)/static.c: $(src)/mainboard/$(MAINBOARDDIR)/devicetree.cb $(objutil)/sconfig/sconfig
453 @printf " SCONFIG $(subst $(src)/,,$(<))\n"
454 mkdir -p $(obj)/mainboard/$(MAINBOARDDIR)
455 $(objutil)/sconfig/sconfig $(MAINBOARDDIR) $(obj)/mainboard/$(MAINBOARDDIR)
457 ramstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
458 romstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
459 verstage-y+=$(obj)/mainboard/$(MAINBOARDDIR)/static.c
461 $(objgenerated)/libverstage.a: $$(libverstage-objs)
463 $(AR_libverstage) rcsT $@ $^
465 #######################################################################
468 rm -rf coreboot-builds
470 clean-for-update-target: clean-payloads
471 rm -f $(obj)/ramstage?* $(obj)/coreboot.romstage $(obj)/coreboot.pre* $(obj)/coreboot.bootblock $(obj)/coreboot.a
472 rm -rf $(obj)/bootblock?* $(obj)/romstage?* $(obj)/location.*
473 rm -f $(obj)/option_table.* $(obj)/crt0.S $(obj)/ldscript
474 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/static.c $(obj)/mainboard/$(MAINBOARDDIR)/config.py $(obj)/mainboard/$(MAINBOARDDIR)/static.dot
475 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/crt0.s $(obj)/mainboard/$(MAINBOARDDIR)/crt0.disasm
476 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc
477 rm -f $(obj)/mainboard/$(MAINBOARDDIR)/bootblock.* $(obj)/dsdt.*
478 rm -f $(obj)/cpu/x86/smm/smm_bin.c $(obj)/cpu/x86/smm/smm.* $(obj)/cpu/x86/smm/smm
481 rm -f $(obj)/coreboot*
483 #######################################################################
484 # Development utilities
487 @echo ldscripts=$(ldscripts)
490 dongle.py -c /dev/term/1 $(obj)/coreboot.rom EOF
498 for hook in commit-msg pre-commit ; do \
499 if [ util/gitconfig/$$hook -nt .git/hooks/$$hook -o \
500 ! -x .git/hooks/$$hook ]; then \
501 sed -e "s,%MAKE%,$(MAKE),g" util/gitconfig/$$hook > .git/hooks/$$hook; \
502 chmod +x .git/hooks/$$hook; \
505 # Now set up thehooks for 3rdparty/blobs
506 if [ -d .git/modules/3rdparty/hooks -a \
507 \( util/gitconfig/commit-msg -nt .git/modules/3rdparty/hooks/commit-msg -o \
508 ! -x .git/modules/3rdparty/hooks/commit-msg \) ]; then \
509 sed -e "s,%MAKE%,$(MAKE),g" util/gitconfig/commit-msg > .git/modules/3rdparty/hooks/commit-msg; \
510 chmod +x .git/modules/3rdparty/hooks/commit-msg; \
512 [ -d 3rdparty/blobs ] && cd 3rdparty/blobs && git config remote.origin.push HEAD:refs/for/master
513 git config remote.origin.push HEAD:refs/for/master
514 (git config --global user.name >/dev/null && git config --global user.email >/dev/null) || (printf 'Please configure your name and email in git:\n\n git config --global user.name "Your Name Comes Here"\n git config --global user.email your.email@example.com\n'; exit 1)
516 include util/crossgcc/Makefile.inc
519 tools: $(objutil)/kconfig/conf $(CBFSTOOL) $(FMAPTOOL) $(RMODTOOL) $(IFWITOOL) $(objutil)/nvramtool/nvramtool $(ROMCC_BIN) $(objutil)/sconfig/sconfig $(IFDTOOL) $(IFDFAKE) $(CBOOTIMAGE) $(AMDFWTOOL) $(FUTILITY)
521 ###########################################################################
522 # Common recipes for all stages
523 ###########################################################################
525 # loadaddr can determine the load address of a stage, which may be needed for
526 # platform-specific image headers (only works *after* the stage has been built)
527 loadaddr = $(shell $(OBJDUMP_$(1)) -p $(objcbfs)/$(1).debug | \
528 sed -ne '/LOAD/s/^.*vaddr 0x\([0-9a-fA-F]\{8\}\).*$$/0x\1/p')
530 # find-substr is required for stages like romstage_null and romstage_xip to
531 # eliminate the _* part of the string
532 find-substr = $(word 1,$(subst _, ,$(1)))
534 # find-class is used to identify the class from the name of the stage
535 # The input to this macro can be something like romstage.x or romstage.x.y
536 # find-class recursively strips off the suffixes to extract the exact class name
537 # e.g.: if romstage.x is provided to find-class, it will remove .x and return romstage
538 # if romstage.x.y is provided, it will first remove .y, call find-class with romstage.x
539 # and remove .x the next time and finally return romstage
540 find-class = $(if $(filter $(1),$(basename $(1))),$(if $(CC_$(1)), $(1), $(call find-substr,$(1))),$(call find-class,$(basename $(1))))
542 # Bootblocks are not CBFS stages. coreboot is currently expecting the bss to
543 # be cleared by the loader of the stage. For ARM SoCs that means one needs to
544 # include the bss section in the binary so the BootROM clears the bss on
545 # loading of the bootblock stage. Achieve this by marking the bss section
546 # loadable,allocatable, and data. Do the same for the .data section in case
547 # it's marked as NOBITS.
548 $(objcbfs)/bootblock.raw.bin: $(objcbfs)/bootblock.elf
549 @printf " OBJCOPY $(notdir $(@))\n"
550 $(OBJCOPY_bootblock) --set-section-flags .bss=load,alloc,data --set-section-flags .data=load,alloc,data $< $<.tmp
551 $(OBJCOPY_bootblock) -O binary $<.tmp $@
553 $(objcbfs)/%.bin: $(objcbfs)/%.raw.bin
556 $(objcbfs)/%.elf: $(objcbfs)/%.debug
557 $(eval class := $(call find-class,$(@F)))
558 @printf " OBJCOPY $(subst $(obj)/,,$(@))\n"
560 $(NM_$(class)) -n $@.tmp | sort > $(basename $@).map
561 $(OBJCOPY_$(class)) --strip-debug $@.tmp
562 $(OBJCOPY_$(class)) --add-gnu-debuglink=$< $@.tmp
565 ###########################################################################
566 # Build the final rom image
567 ###########################################################################
569 # extract_nth - Return a subsection of the $file string
571 # the input string looks like this:
572 # ./build/cbfs/fallback/romstage.elf|fallback/romstage|stage|none||64|--xip*-S*.car.data*-P*0x10000
575 # 1 - Path and name of file [FILENAME: Added to cbfs-files-y list variable]
576 # 2 - Name of file in cbfs [$(FILENAME)-file]
577 # 3 - File type: [$(FILENAME)-type]
578 # bootblock, cbfs header, stage, payload, optionrom, bootsplash, raw, vsa,
579 # mbi, microcode, fsp, mrc, cmos_default, cmos_layout, spd, mrc_cache,
580 # mma, efi, deleted, null
581 # 4 - Compression type [$(FILENAME)-compression]
583 # 5 - Base address [$(FILANAME)-position]
584 # 6 - Alignment [$(FILENAME)-align]
585 # 7 - cbfstool flags [$(FILENAME)-options]
588 # $(1) = Section to extract
589 # $(2) = Input string
592 # 1) replace all '|' characters with the sequence '- -' within the full string, prepended and appended with the character '-'
593 # 2) extract the specified section from the string - this gets us the section surrounded by '-' characters
594 # 3) remove the leading and trailing '-' characters
595 # 4) replace all '*' characters with spaces
596 extract_nth=$(subst *,$(spc),$(patsubst -%-,%,$(word $(1), $(subst |,- -,-$(2)-))))
598 # regions-for-file - Returns a cbfstool regions parameter
599 # $(call regions-for-file,$(filename))
600 # returns "REGION1,REGION2,..."
602 # This is the default implementation. When using a boot strategy employing
603 # multiple CBFSes in fmap regions, override it.
604 regions-for-file ?= COREBOOT
607 # $(call options-for-region,$(filename),$(region),$(options))
609 # Returns potentially modified options, depending on file and region.
610 # Default is to return it unmodified
611 options-for-region ?= $(3)
613 ifeq ($(CONFIG_CBFS_AUTOGEN_ATTRIBUTES),y)
614 cbfs-autogen-attributes=-g
617 # cbfs-add-cmd-for-region
618 # $(call cbfs-add-cmd-for-region,file in extract_nth format,region name)
619 define cbfs-add-cmd-for-region
621 add$(if $(filter stage,$(call extract_nth,3,$(1))),-stage)$(if \
622 $(filter payload,$(call extract_nth,3,$(1))),-payload)$(if \
623 $(filter flat-binary,$(call extract_nth,3,$(1))),-flat-binary) \
624 -f $(call extract_nth,1,$(1)) \
625 -n $(call extract_nth,2,$(1)) \
626 $(if $(filter-out flat-binary,$(filter-out stage,$(call \
627 extract_nth,3,$(1)))),-t $(call extract_nth,3,$(1))) \
628 $(if $(call extract_nth,4,$(1)),-c $(call extract_nth,4,$(1))) \
629 $(cbfs-autogen-attributes) \
631 $(call options-for-region,$(call extract_nth,2,$(1)),$(2), \
632 $(if $(call extract_nth,6,$(1)),-a $(call extract_nth,6,$(file)), \
633 $(if $(call extract_nth,5,$(file)),-b $(call extract_nth,5,$(file)))) \
634 $(call extract_nth,7,$(1)))
637 # Empty line before endef is necessary so cbfs-add-cmd-for-region ends in a
641 # $(call cbfs-add-cmd,file in extract_nth format,non-empty if file removal requested)
643 printf " CBFS $(call extract_nth,2,$(1))\n"
644 $(if $(2),-$(CBFSTOOL) $@.tmp remove -n $(call extract_nth,2,$(file)) 2>/dev/null)
645 $(eval _tmp-cbfs-add-cmd-regions=$(call regions-for-file,$(call extract_nth,2,$(1)))) \
646 $(foreach region,$(subst $(comma),$(spc),$(_tmp-cbfs-add-cmd-regions)), \
647 $(call cbfs-add-cmd-for-region,$(1),$(region)))
650 cbfs-files=$(cbfs-files-fixed) $(cbfs-files-aligned) $(cbfs-files-regular)
651 prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file)))
652 prebuild-files = $(foreach file,$(cbfs-files), $(call cbfs-add-cmd,$(file),$(CONFIG_UPDATE_IMAGE)))
654 ifeq ($(CONFIG_FMDFILE),)
655 # For a description of the flash layout described by these variables, check
656 # the $(DEFAULT_FLASHMAP) .fmd files.
657 ifeq ($(CONFIG_ARCH_X86),y)
658 DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default-x86.fmd
660 FMAP_ROM_ADDR := $(call int-subtract, 0x100000000 $(CONFIG_ROM_SIZE))
661 FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
662 # entire "BIOS" region (everything directly of concern to the host system)
663 # relative to ROM_BASE
664 FMAP_BIOS_BASE := $(call int-subtract, $(CONFIG_ROM_SIZE) $(CONFIG_CBFS_SIZE))
665 FMAP_BIOS_SIZE := $(shell echo $(CONFIG_CBFS_SIZE) | tr A-F a-f)
666 # position and size of flashmap, relative to BIOS_BASE
668 FMAP_FMAP_SIZE := 0x100
669 # position and size of CBFS, relative to BIOS_BASE
670 FMAP_CBFS_BASE := $(FMAP_FMAP_SIZE)
671 FMAP_CBFS_SIZE := $(call int-subtract, $(FMAP_BIOS_SIZE) $(FMAP_FMAP_SIZE))
672 else # ifeq ($(CONFIG_ARCH_X86),y)
673 DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default.fmd
676 FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
677 # entire "BIOS" region (everything directly of concern to the host system)
678 # relative to ROM_BASE
680 FMAP_BIOS_SIZE := $(CONFIG_CBFS_SIZE)
681 # position and size of flashmap, relative to BIOS_BASE
682 FMAP_FMAP_BASE := 0x20000
683 FMAP_FMAP_SIZE := 0x100
684 # position and size of CBFS, relative to BIOS_BASE
685 FMAP_CBFS_BASE := $(call int-add,$(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE))
686 FMAP_CBFS_SIZE := $(call int-subtract,$(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE))
687 endif # ifeq ($(CONFIG_ARCH_X86),y)
689 $(obj)/fmap.fmd: $(top)/Makefile.inc $(DEFAULT_FLASHMAP) $(obj)/config.h
690 sed -e "s,##ROM_BASE##,$(FMAP_ROM_ADDR)," \
691 -e "s,##ROM_SIZE##,$(FMAP_ROM_SIZE)," \
692 -e "s,##BIOS_BASE##,$(FMAP_BIOS_BASE)," \
693 -e "s,##BIOS_SIZE##,$(FMAP_BIOS_SIZE)," \
694 -e "s,##FMAP_BASE##,$(FMAP_FMAP_BASE)," \
695 -e "s,##FMAP_SIZE##,$(FMAP_FMAP_SIZE)," \
696 -e "s,##CBFS_BASE##,$(FMAP_CBFS_BASE)," \
697 -e "s,##CBFS_SIZE##,$(FMAP_CBFS_SIZE)," \
698 $(DEFAULT_FLASHMAP) > $@.tmp
700 else # ifeq ($(CONFIG_FMDFILE),)
701 $(obj)/fmap.fmd: $(CONFIG_FMDFILE) $(obj)/config.h
703 endif # ifeq ($(CONFIG_FMDFILE),)
705 # generated at the same time as fmap.fmap
706 $(obj)/fmap_config.h: $(obj)/fmap.fmap
707 $(obj)/fmap.desc: $(obj)/fmap.fmap
709 $(obj)/fmap.fmap: $(obj)/fmap.fmd $(FMAPTOOL)
710 echo " FMAP $(FMAPTOOL) -h $(obj)/fmap_config.h $< $@"
711 $(FMAPTOOL) -h $(obj)/fmap_config.h -R $(obj)/fmap.desc $< $@
713 ifneq ($(CONFIG_UPDATE_IMAGE),y)
714 $(obj)/coreboot.pre: $(objcbfs)/bootblock.bin $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file) $(obj)/fmap.fmap $(obj)/fmap.desc
715 $(CBFSTOOL) $@.tmp create -M $(obj)/fmap.fmap -r $(shell cat $(obj)/fmap.desc)
716 ifeq ($(CONFIG_ARCH_X86),y)
717 $(CBFSTOOL) $@.tmp add \
718 -f $(objcbfs)/bootblock.bin \
721 -b -$(call file-size,$(objcbfs)/bootblock.bin) $(cbfs-autogen-attributes)
722 else # ifeq ($(CONFIG_ARCH_X86),y)
723 # don't add bootblock to cbfs yet, it's just a waste of space
724 true $(CBFSTOOL) $@.tmp add \
725 -f $(objcbfs)/bootblock.bin \
729 $(CBFSTOOL) $@.tmp write -u \
731 -f $(objcbfs)/bootblock.bin
732 # make space for the CBFS master header pointer. "ptr_" is just
733 # arbitrary 4 bytes that will be overwritten by add-master-header.
734 printf "ptr_" > $@.tmp.2
735 $(CBFSTOOL) $@.tmp add \
737 -n "header pointer" \
741 endif # ifeq ($(CONFIG_ARCH_X86),y)
742 $(CBFSTOOL) $@.tmp add-master-header
743 $(prebuild-files) true
745 else # ifneq ($(CONFIG_UPDATE_IMAGE),y)
746 .PHONY: $(obj)/coreboot.pre
747 $(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL)
748 mv $(obj)/coreboot.rom $@.tmp || \
749 (echo "Error: You have UPDATE_IMAGE set in Kconfig, but have no existing image to update." && \
752 $(prebuild-files) true
754 endif # ifneq ($(CONFIG_UPDATE_IMAGE),y)
756 ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y)
757 REFCODE_BLOB=$(obj)/refcode.rmod
758 $(REFCODE_BLOB): $(RMODTOOL)
759 $(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@
762 $(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $$(INTERMEDIATE)
763 @printf " CBFS $(subst $(obj)/,,$(@))\n"
764 # The full ROM may be larger than the CBFS part, so create an empty
765 # file (filled with \377 = 0xff) and copy the CBFS image over it.
766 dd if=/dev/zero bs=$(call _toint,$(CONFIG_ROM_SIZE)) count=1 2> /dev/null | tr '\000' '\377' > $@.tmp
767 dd if=$(obj)/coreboot.pre of=$@.tmp bs=8192 conv=notrunc 2> /dev/null
768 ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
769 ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
770 @printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
771 $(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
774 ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y)
775 ifeq ($(CONFIG_CPU_MICROCODE_CBFS_GENERATE),y)
776 @printf " UPDATE-FIT \n"
777 $(CBFSTOOL) $@.tmp update-fit -n cpu_microcode_blob.bin -x $(CONFIG_CPU_INTEL_NUM_FIT_ENTRIES)
781 @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n"
783 ifeq ($(CONFIG_IASL_WARNINGS_ARE_ERRORS),)
784 @printf "\n***** WARNING: IASL warnings as errors is disabled! *****\n"
785 @printf "***** Please fix the ASL for this platform. *****\n\n"
788 cbfs-files-y += $(CONFIG_CBFS_PREFIX)/romstage
789 $(CONFIG_CBFS_PREFIX)/romstage-file := $(objcbfs)/romstage.elf
790 $(CONFIG_CBFS_PREFIX)/romstage-type := stage
791 $(CONFIG_CBFS_PREFIX)/romstage-compression := $(CBFS_PRERAM_COMPRESS_FLAG)
792 ifeq ($(CONFIG_ARCH_ROMSTAGE_ARM),y)
793 $(CONFIG_CBFS_PREFIX)/romstage-options := -b 0
795 ifeq ($(CONFIG_ARCH_ROMSTAGE_X86_32)$(CONFIG_ARCH_ROMSTAGE_X86_64),y)
796 # Use a 64 byte alignment to provide a minimum alignment
797 # requirement for the overall romstage. While the first object within
798 # romstage could have a 4 byte minimum alignment that doesn't mean the linker
799 # won't decide the entire section should be aligned to a larger value. In the
800 # future cbfstool should add XIP files proper and honor the alignment
801 # requirements of the program segment.
803 # Make sure that segment for .car.data is ignored while adding romstage.
804 $(CONFIG_CBFS_PREFIX)/romstage-align := 64
805 $(CONFIG_CBFS_PREFIX)/romstage-options := -S ".car.data"
807 # If CAR does not support execution of code, romstage on x86 is expected to be
809 ifneq ($(CONFIG_NO_XIP_EARLY_STAGES),y)
810 $(CONFIG_CBFS_PREFIX)/romstage-options += --xip
812 # If XIP_ROM_SIZE isn't being used don't overly constrain romstage by passing
813 # -P with a default value.
814 ifneq ($(CONFIG_NO_FIXED_XIP_ROM_SIZE),y)
815 $(CONFIG_CBFS_PREFIX)/romstage-options += -P $(CONFIG_XIP_ROM_SIZE)
816 endif # CONFIG_NO_FIXED_XIP_ROM_SIZE
818 endif # CONFIG_NO_XIP_EARLY_STAGES
819 endif # CONFIG_ARCH_ROMSTAGE_X86_32 / CONFIG_ARCH_ROMSTAGE_X86_64
821 cbfs-files-y += $(CONFIG_CBFS_PREFIX)/ramstage
822 $(CONFIG_CBFS_PREFIX)/ramstage-file := $(objcbfs)/ramstage.elf
823 $(CONFIG_CBFS_PREFIX)/ramstage-type := stage
824 $(CONFIG_CBFS_PREFIX)/ramstage-compression := $(CBFS_COMPRESS_FLAG)
826 cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode
827 $(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB)
828 $(CONFIG_CBFS_PREFIX)/refcode-type := stage
829 $(CONFIG_CBFS_PREFIX)/refcode-compression := $(CBFS_COMPRESS_FLAG)
831 cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin
832 vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE)
833 vgaroms/seavgabios.bin-type := raw
835 cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config
836 config-file := $(DOTCONFIG):defconfig
839 cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision
840 revision-file := $(obj)/build.h
843 BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)))
844 cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX)
845 bootsplash$(BOOTSPLASH_SUFFIX)-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))
846 bootsplash$(BOOTSPLASH_SUFFIX)-type := bootsplash
848 cbfs-files-$(CONFIG_BOARD_ID_MANUAL) += board_id
849 board_id-file := $(obj)/board_id
853 printf $(CONFIG_BOARD_ID_STRING) > $@
855 # Ensure that no payload segment overlaps with memory regions used by ramstage
856 # (not for x86 since it can relocate itself in that case)
857 ifneq ($(CONFIG_ARCH_X86),y)
858 check-ramstage-overlap-regions := ramstage
859 check-ramstage-overlap-files :=
860 ifneq ($(CONFIG_PAYLOAD_NONE),y)
861 check-ramstage-overlap-files += $(CONFIG_CBFS_PREFIX)/payload
864 # will output one or more lines of "<load address in hex> <memlen in decimal>"
865 cbfs-get-segments-cmd = $(CBFSTOOL) $(obj)/coreboot.pre print -v | sed -n \
866 '\%$(1)%,\%^[^ ]\{4\}%s% .*load: \(0x[0-9a-fA-F]*\),.*length: [0-9]*/\([0-9]*\).*%\1 \2%p'
868 ramstage-symbol-addr-cmd = $(OBJDUMP_ramstage) -t $(objcbfs)/ramstage.elf | \
869 sed -n '/ $(1)$$/s/^\([0-9a-fA-F]*\) .*/0x\1/p'
871 check-ramstage-overlaps: $(obj)/coreboot.pre
872 programs=$$($(foreach file,$(check-ramstage-overlap-files), \
873 $(call cbfs-get-segments-cmd,$(file)) ; )) ; \
874 regions=$$($(foreach region,$(check-ramstage-overlap-regions), \
876 $(call ramstage-symbol-addr-cmd,_$(region)) ; \
877 $(call ramstage-symbol-addr-cmd,_e$(region)) ; )) ; \
879 for x in $$programs; do \
880 if [ -z $$pstart ]; then pstart=$$(($$x)) ; continue ; fi ; \
881 pend=$$(($$pstart + $$x)) ; \
882 rname= ; rstart= ; rend= ; \
883 for y in $$regions ; do \
884 if [ -z $$rname ]; then rname=$$y ; continue ; fi ; \
885 if [ -z $$rstart ]; then rstart=$$(($$y)) ; continue ; fi ; \
887 if [ $$pstart -lt $$rend -a $$rstart -lt $$pend ]; then \
888 echo "ERROR: Ramstage region _$$rname overlapped by:" \
889 $(check-ramstage-overlap-files) ; \
892 rname= ; rstart= ; rend= ; \
897 INTERMEDIATE+=check-ramstage-overlaps
898 PHONY+=check-ramstage-overlaps
902 echo "Building $(UTIL)"
903 echo '<?xml version="1.0" encoding="utf-8"?><testsuite>' > $@.tmp
904 echo "<testcase classname='$(UTIL)' name='$(UTIL)'>" >> $@.tmp
905 -$(MAKE) -j $(CPUS) -C "util/$(UTIL)" clean distclean > $@.tmp.2 2>&1
906 $(MAKE) -j $(CPUS) -C "util/$(UTIL)" $(MAKETARGET) >> $@.tmp.2 2>&1 && type="system-out" || type="failure"; \
908 if [ "$$type" = "failure" ]; then \
909 echo "<failure type='buildFailed'>" >> $@.tmp; \
910 echo "Building $(UTIL) Failed"; \
912 echo "<$$type>" >> $@.tmp; \
913 echo "Building $(UTIL) Succeeded"; \
915 echo '<![CDATA[' >> $@.tmp; \
916 cat $@.tmp.2 >> $@.tmp; \
917 echo "]]></$$type>" >>$@.tmp
919 echo "</testcase>" >> $@.tmp
920 echo "</testsuite>" >> $@.tmp
921 mv $@.tmp "util/$(UTIL)/$@"
933 JENKINS_PAYLOAD?=none
936 util/lint/lint lint-stable --junit
937 util/abuild/abuild -B -J $(if $(JENKINS_NOCCACHE),,-y) -c $(CPUS) -z -p $(JENKINS_PAYLOAD) -x -X $(top)/abuild-chromeos.xml
938 util/abuild/abuild -B -J $(if $(JENKINS_NOCCACHE),,-y) -c $(CPUS) -z -p $(JENKINS_PAYLOAD)
939 (cd payloads/libpayload; unset COREBOOT_BUILD_DIR; $(MAKE) $(if $(JENKINS_NOCCACHE),,CONFIG_LP_CCACHE=y) V=$(V) Q=$(Q) junit.xml)
940 $(foreach tool, $(TOOLLIST), $(MAKE) CPUS=$(CPUS) V=$(V) Q=$(Q) UTIL="$(tool)" MFLAGS= MAKEFLAGS= MAKETARGET= junit.xml; )
941 $(MAKE) CPUS=$(CPUS) V=$(V) Q=$(Q) UTIL="romcc" MFLAGS= MAKEFLAGS= MAKETARGET=test junit.xml