auto_patcher

   1 #!/bin/bash
   2
   3 # version: beta v2.4.7, patches 2012.011.02.
   4
   5 # PDroid created by svyat. Official PDroid thread is
   6 # http://forum.xda-developers.com/showthread.php?t=1357056
   7
   8 # The Auto-Patcher created by pastime1971 and mateorod
   9 # Thread and support for the Auto-Patcher can be found at
  10 # http://forum.xda-developers.com/showthread.php?p=27589651#post27589651
  11
  12 # ChangeLog
  13 # 2012.05.00. (v0.1)
  14 # ...........
  15 # 2012.05.12. (v0.2)   allows user to specify a different version of patches
  16 # 2012.05.13. (v0.3.0) force "patch -N", remove temp upon failure, generate log output
  17 # 2012.05.13. (v0.3.1) revised the generation of updater-script (SGS2)
  18 # 2012.05.15.          added AOSP patches
  19 # 2012.05.15.          added crespo-aosp patches; device-specific patching if patch exists
  20 # 2012.05.15.          remove restore.zip upon failure
  21 # 2012.05.15. (v0.4.1) added CM7 (GB) patches
  22 # 2012.05.18. (v0.4.2) added checking for tool commands
  23 # 2012.05.21. (v0.4.3) apply device-specific patches only when it is specified
  24 # 2012.05.26.           added task title to log
  25 # 2012.05.31. (v0.4.4) CM9 patches updated, crespo-aosp added
  26 # 2012.06.04. (v0.4.5) added checking tools and rom, added aroma installer support
  27 #                       add patch outputs reroute
  28 # 2012.06.15.          CM9 patches updated
  29 # 2012.06.16. (v0.4.6) AOKP patches updated, patch versions restructured
  30 # 2012.06.17. (v0.5.0) patcher script reorganized, removed build.prop
  31 # 2012.06.17. (v0.6.0) auto patcher script for pdroid and v6 patches
  32 # 2012.06.19. (v0.6.1) add patches for CM7.2 Final
  33 # 2012.06.20. (v0.6.2) updated CM 7.2 patches
  34 # 2012.06.23. (v0.6.3) fix symlinks
  35 # 2012.06.26. (v0.6.4) added 0618 patches for cm7 nightlies; removed 0619 cm7.2 final
  36 # 2012.06.27. (v0.6.5) added new CM9 patches (20120626)
  37 # 2012.06.27. (v0.6.6) added CM7 nightly patches (20120625) (finally!)
  38 # 2012.07.02. (v0.7.0) Redid AOSP/AOKP; add Windows support (using Cygwin). Thanks kobik77!
  39 # 2012.07.06. (v0.7.1) updated CM9 patches (20120706)
  40 # 2012.07.08. (v0.7.2) updated AOKP (20120707) and CM9 (20120708) pdroid patches
  41 # 2012.07.11. (v1.0.0) reworked script works on Linux, Mac OSX, and Windows (on Cygwin);
  42 #                       added new ICS/JellyBean support for the new V6-Supercharger
  43 # 2012.07.18. (v1.0.1) new CM7/CM9 Pdroid patches (20120718)
  44 # 2012.07.23. (v1.0.2) updated CM9 patches (20120723)
  45 # 2012.07.23. (v1.0.3) updated CM9 patches (20120724)
  46 # 2012.08.06. (v1.5.0) updated smali/baksmali binaries to 1.33
  47 # 2012.08.06.          Added Pdroid/V6supercharger support for CM10 Jellybean!
  48 # 2012.08.06.          Improved PDroid stability and efficiency (Thanks CollegeDev)
  49 # 2012.08.06. (v1.6.0) added aokp-jb patches for pdroid/v6supercharger, script update
  50 # 2012.08.17. (v1.9.5) Added support for pdroid_addon, by CollegeDev.
  51 #                       Added insecure boot.img mod
  52 #                       Added support for aosp-jb (This needs testing, and may not be
  53 #                             a wide patch due to large variation between AOSP roms.
  54 #                                         -Please report all experiences!
  55 #                       Updated all v6supercharger patches w/new edits to ProcessList
  56 #                       Major script overhaul in preparation for additional mods!
  57 # 2012.08.20. (v1.9.6) Conditional support for Official cm10 and aokp-jb builds
  58 # 2012.08.23. (v1.9.7) Final/confirmed pdroid support for Official CM10 and AOKP-JB
  59 # 2012.09.04  (v1.9.8) Bundled cygwin-compatible tools (original was corrupt).
  60 #                      For Cygwin, replaced h2b function with simple bash math
  61 #                         conversion (req'd for compat w/ Cygwin tools).
  62 # 2012.08.26. (v2.0.0) Added .apk patching
  63 #                      Added 3G Dongle support for Nexus 7
  64 #                      TabletUI support for Nexus 7 (maybe more)
  65 #                      Google Voice support for Nexus 7
  66 #                               mods are 3gdongle, tabletUI, voice, or nexus7suite (for all)
  67 #                       Added provisional file copy menu to widen patching base
  68 # 2012.09.11. (v2.0.1) Cygwin support fixes
  69 # 2012.09.11. (v2.0.2) Bugfix for 3gdongle (all)
  70 # 2012.09.16. (v2.1.0) Significant restructuring of core operations; added edit text file
  71 #                       fix for "method-cap" errors in pdroid.
  72 # 2012.09.20. (v2.1.1) Fix for Phone FC's; OSX support finalized; ContentResolver resolved
  73 # 2012.09.28. (v2.1.2) Hotfix for failed pdroid patching. Logging improvements.
  74 # 2012.10.07. (v2.1.5) Final pdroid support for CM7.2 Official Releases
  75 #                       Added aosp-mod patches for pdroid patching of AOSP kangs
  76 #                       Switched to Chainfire's (f)aapt for speed/space reasons
  77 # 2012.10.13. (v2.1.6) New PDroid patches for aokp-jb and cm10 4.1.2
  78 #                       Revert (f)aapt- temporary due to reported issues
  79 # 2012.10.15. (v2.17) New (again) CM10 pdroid patches.
  80 #                     Move files to be copied into $p/$R/$B
  81 #                       -This required a bunch of file moving-report broken symlinks.
  82 #                     Some error check on the old RIL delete functions (thanks bundrik)
  83 # 2012.10.16. (v2.1.7.5) Fix FC on phone with CM10 pdroid patches
  84 # 2012.10.19. (v2.1.9) Testing CM10 support for PDroid Extension by CollegeDev.
  85 # 2012.10.22. (v2.2.0) aosp/aokp and cm10 support for pdroid extension by CollegeDev
  86 #                       MAJOR reworking of patches and improved query. only 4 mod types:
  87 #                       cm, aokp, aosp, and pa. See our OP for details.
  88 # 2012.10.26. (v2.3.0) Final (LTS) version. Stable for now until upstream breaks any patches
  89 #                      Thanks to KicknGuitar for the OSX testing!
  90 # 2012.11.01. (v2.3.1) Fix for pdroid RIL deletion for older roms
  91 #                       Better Build query logic and help messages
  92 # 2012.11.02. (v2.3.5) Add Evervolv support for all mods- Thanks to new maintainer poncik!
  93 #                       Fix method cap for pdroid/pd2.0 for AOKP and kangs
  94 # 2012.11.06. (v2.4.0) Update pd2.0 patches to latest pd2.0 release- all except Evervolv
  95 #                       add GsmService to smali.txt; improve rom probe
  96 # 2012.11.08. (v2.4.2) Add Evervolv support for pd2.0; Device-specific scripts
  97 #                       Will display error if using a mod on an inapplicable rom
  98 # 2012.11.09. (v2.4.5) Error catch for random method issues, fix pd2.0 Evervolv and aosp-jb
  99 # 2012.11.17. (v2.4.6) Fix pdroid for CM7. FINALLY!.
 100 # 2012.11.17. (v2.4.7) Internal debugging improvements
 101
 102 # SHELL PROGRAMMING NOTES:
 103 # [ -s FILE ]
 104 # [[ -n STRING ]] or [[ -z STRING ]]
 105
 106 VERSION="v2.4.7"
 107 CURRENT_ANDROID="4.2.1"
 108
 109 # pass variables to children
 110 set -a
 111
 112 printusage_help () {
 113      usage_help
 114      exit
 115 }
 116
 117 usage_help () {
 118      # This could REALLY use some better formatting. Even I find it intimidating looking.
 119      echo "      The Auto-Patcher $VERSION"
 120      echo ""
 121      echo "usage: $0 [ROMNAME].zip [MODS] [ROMTYPE] [PATCHDATE]"
 122      echo ""
 123      echo "* [MODS] can be pdroid, pd2.0, v6supercharger, tabletUI, etc..."
 124      echo "MODS can be combined by separating them with a comma and NO SPACES!!!"
 125      echo ""
 126      echo "* [ROMTYPE] can be cm, aokp, aosp or pa                      [recommended]"
 127      echo "* [PATCHDATE] will select older patch versions, e.g 20121030    [optional]"
 128      echo ""
 129      echo " try \"$0 ROM.ZIP -h\" to see what is available"
 130      echo ""
 131 }
 132
 133 usage_more_help () {
 134      usage_help
 135      echo ""
 136      echo "press 'q' to see a list of available patches or CTRL-c to quit the help menu"
 137 }
 138
 139 display_help () {
 140      cd patches
 141      echo ""
 142      echo "AVAILABLE PATCHES"
 143      echo ""
 144      echo "Note: There are ONLY 4 ROMTYPES: [pa, cm, aokp, and aosp]."
 145      echo "The Auto-Patcher will automatically slot if you need aosp-jb or aosp-mod"
 146      echo ""
 147      echo "*******************************************************************"
 148      echo ""
 149      echo "Please keep in mind the Android version covers a range {2.3+, 4.0+,...etc.}"
 150      echo " is there only for your information and is not needed on the command line"
 151      echo ""
 152      find -H * -name 2012* | more -d -10
 153      echo ""
 154      echo "*****************************************************************"
 155      echo ""
 156      echo "All listed mods are currently supported. So if you only see older patches,"
 157      echo "that simply means those early patches are still working for current roms."
 158      echo ""
 159      cleanup
 160      printusage_help
 161 }
 162
 163 debug_help () {
 164      # From print_error. For problems decompiling or patching mostly.
 165      echo "! please refer to $LOG for any debugging"
 166      echo ""
 167      echo "! patching failed."
 168      echo "! it may be possible to patch $ROM using other patch version"
 169      echo ""
 170      cleanup
 171      printusage_help
 172 }
 173
 174 romtype_help () {
 175      # From rom_error (bad romtype) and date_error (patch date w/o specifying romtype)
 176      echo ""
 177      echo "!!!There are only four supported ROMTYPES: 1) cm  2) aokp  3) aosp  4) pa"
 178      echo ""
 179      echo "Find out which of the above ROMTYPES your rom is based on and try again!"
 180      echo "**********************************************"
 181      echo ""
 182      cleanup
 183      printusage_help
 184 }
 185
 186 cleanup () {
 187      [ -d "$TEMP" ] && \rm -rf "$TEMP"
 188 }
 189
 190 garbage () {
 191         unset GARBAGE
 192         GARBAGE=($(find $@ -name "*.orig")) && rm -rf ${GARBAGE[@]} && echo "GARBAGE= ${GARBAGE[@]}" >> "$LOG"
 193         GARBAGE=($(find $@ -name "*.rej"))  && rm -rf ${GARBAGE[@]} && echo "GARBAGE= ${GARBAGE[@]}" >> "$LOG"
 194 }
 195
 196
 197 print_error () {
 198      # General purpose error. Used for errors in main, as opposed to probe or set-up.
 199      echo ""
 200      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 201      printtask "!!! error: $@"
 202      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 203      echo ""
 204      debug_help
 205 }
 206
 207 smali_error () {
 208      # Smali binary error. Problem often goes away on second run.
 209      echo ""
 210      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 211      printtask "!!! error: $@"
 212      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 213      echo ""
 214      if [[ `grep 'method index is too large' "$LOG"` != "" ]]; then
 215           printtask "!!! Problem with method cap !!!"
 216           printtask "... attempting fix ..."
 217           . patches/common/framework.jar.sh 2>&1 > ${JAR}.log
 218           printtask "... rebuild framework.jar ..."
 219           java -Xmx512M -jar smali.jar -a $API tmp/${FILE}.out/smali -o tmp/${FILE}.out/classes.dex >> "$LOG" 2>> "$LOG"
 220           [ -f tmp/${FILE}.out/classes.dex ] || print_error "Could not resolve method cap issue- please submit log"
 221      else
 222           printtask "!!! This error is generally due to an unknown bug in the smali binary!"
 223           echo "In our experience, it goes away if you run the patcher a second time."
 224           echo " Please run the Auto-Patcher with the same command once again."
 225           echo ""
 226           echo "If after the third attempt the same thing happens,"
 227           echo " please upload your logfile to our support thread!"
 228           echo ""
 229           cleanup
 230           exit
 231      fi
 232 }
 233
 234 mismatch_error () {
 235      # Function that exposes attempts to apply a mod to an upsupported Android version
 236      echo ""
 237      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 238      printtask "!!! error: $@"
 239      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 240      echo ""
 241      cleanup
 242      printusage_help
 243 }
 244
 245 date_error () {
 246      # Remind users to include a romtype if they are going to specify a patch date
 247      echo ""
 248      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 249      printtask "!!! error: $@"
 250      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 251      echo ""
 252      echo "Please put a ROMTYPE before the patch date and run again!!"
 253      romtype_help
 254 }
 255
 256 rom_error () {
 257      # For when an unsupported romtype is manually entered on the command-line
 258      echo ""
 259      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 260      printtask "!!! error: $@"
 261      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 262      romtype_help
 263 }
 264
 265 conflict_error () {
 266      # For conflicting packages
 267      echo ""
 268      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 269      printtask "!!! error: $@"
 270      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 271      cleanup
 272      PID=mods
 273      mods_info
 274 }
 275
 276 misspatch_error () {
 277      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 278      printtask "!! error: $@ "
 279      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 280      echo ""
 281      printtask "!! The Auto-Patcher could not find its patches and/or tools!"
 282      echo ""
 283      echo "* Did you run ./batch.sh first?"
 284      echo ""
 285      echo "The patch_patches.tgz and patch_tools.tgz need to be in this directory,"
 286      echo "  one way or another..."
 287      echo ""
 288      cleanup
 289      printusage_help
 290 }
 291
 292 misstools_error () {
 293      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 294      printtask "!! error: $@ "
 295      printtask "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
 296      printtask "Your set-up is missing a dependency."
 297      echo "We require JDK, patch and cpio."
 298      echo ""
 299      echo ""
 300      echo "Each distro is different"
 301      echo "but you must ensure you have them all installed and try again."
 302      echo ""
 303      cleanup
 304      printusage_help
 305 }
 306
 307 printtask () {
 308         echo "" >> "$LOG"
 309         echo $@ | tee -a "$LOG"
 310 }
 311
 312 copyfailed () {
 313         echo ""
 314         printtask "File for which patching failed:"
 315         printtask "---------------------------------------------"
 316         echo ""
 317         printtask "${FAIL##*/}"
 318         echo ""
 319         echo "---------------------------------------------"
 320         echo ""
 321         echo "We can try to add a premade copy of those files."
 322         echo "This sometimes works."
 323         echo ""
 324         echo "But IT MAY NOT WORK!!!"
 325         echo ""
 326         echo ""
 327         askconsent && return 0 || return 1
 328 }
 329
 330 askconsent () {
 331      sleep 1
 332      echo -n "Do you want to proceed ? (YES/no) "
 333      read PROCEED
 334      echo "askconsent final = ${PROCEED}: for $FAIL" >> "$LOG"
 335      case $PROCEED in
 336           [Yy] | [Yy][Ee][Ss])
 337                return 0;       # successful:
 338                echo "*** You (or ApG) have elected to use a prepatched copy of $FAIL ***" >> "$LOG"
 339                ;;
 340           *)
 341                return 1;        # error
 342                echo "*** You have declined to insert $FAIL by not answering 'yes' at the prompt. ***" >> "$LOG"
 343                ;;
 344      esac
 345 }
 346
 347 replace_updater () {
 348
 349 # Function for devices that use SDcard installs. Also to be tested for CM7
 350 #  since CM7 seems to use an updater-script that wipes EMMC. Testing
 351
 352      UPDIR=META-INF/com/google/android
 353      \rm $UPDIR/updater-script
 354      \cp patches/common/$UPDIR/updater-script $UPDIR
 355      echo "run_program(\"/sbin/busybox\", \"umount\", \"/system\");" >> UPDATE.txt
 356      cat UPDATE.txt >> $UPDIR/updater-script
 357      echo ""
 358      echo "New updater-script being used:" >> "$LOG"
 359      echo "-----------------------------" >> "$LOG"
 360      cat $UPDIR/updater-script >> "$LOG"
 361 }
 362
 363 abspath () {
 364      case `uname -s` in
 365      CYGWIN*)
 366           echo $(cygpath -ua "$1")
 367           ;;
 368      Darwin)
 369           #[[ $(echo $1 | awk '/^\//') == $1 ]] && echo "$1" || echo "$PWD/$1"
 370           [[ ${1:0:1} == "/" ]] && echo "$1" || echo "$PWD/$1"
 371           ;;
 372      Linux)
 373           echo $(readlink -f "$1")
 374           ;;
 375      *)
 376           if [[ ${1:0:1} == "/" ]]; then
 377                echo "$1"
 378           elif [[ ${1:0:2} == "./" ]]; then
 379                echo "$PWD/${1:2}"
 380           else
 381                echo "$PWD/$1"
 382           fi
 383           ;;
 384      esac
 385 }
 386
 387 mods_info () {
 388      CEILING=$CURRENT_ANDROID # Default is that everything works...we'll see.
 389      case $PID in
 390         mods)
 391              echo ""
 392              echo "The Auto-Patcher $VERSION"
 393              echo "*******************************"
 394              echo ""
 395              echo "The available mods are"
 396              echo "****************************************************"
 397              echo "*  pdroid   openpdroid  voice   v6supercharger     *"
 398              echo "*  voice    insecure    secure  external_internal  *"
 399              echo "*  tabletUI 3gdongle    pd2.0                      *"
 400              echo "****************************************************"
 401              echo ""
 402              echo "To find out more about any mod, simply enter:"
 403              echo "     ./auto_patcher -h <MODNAME>"
 404              echo ""
 405              echo " For usage info: ./auto_patcher -h"
 406              echo ""
 407              cleanup
 408              exit
 409              ;;
 410         auto*)
 411              echo ""
 412              echo "**************************************"
 413              echo "The Auto-Patcher ate a kitten once..."
 414              echo "**************************************"
 415              printusage_help
 416              ;;
 417         voice)
 418              FLOOR=4.0.0
 419              DESC="Use on wifi-only tablets to have the software register as 'voice-enabled'. Allows VOIP like Google Voice to function."
 420              ;;
 421         v6supercharger)
 422              FLOOR=4.0.0
 423              CEILING=4.2.1
 424              DESC="A memory-management tool. It requires smali edits for Android roms 4.0+."
 425              DESC1="The Auto-Patcher applies all 56 edits recommended by the dev."
 426              DEV="Zeppelinrox"
 427              DEPENDENCY="The V6 Supercharger Script. Get it at http://forum.xda-developers.com/showthread.php?t=991276/"
 428                ;;
 429         pdroid)
 430              FLOOR=2.3.7
 431              CEILING=4.1.2
 432              DESC="Security Software that safely manages permissions w/o causing FC's. No longer under development. Try the open-source expansion of this program, PDroid Manager."
 433              DESC1="(It's the 'openpdroid' mod within the Auto-Patcher)."
 434              DEV="Svyat"
 435              DEPENDENCY="The Pdroid app. You can get it at http://forum.xda-developers.com/showthread.php?t=1923576"
 436              ;;
 437         pd2.0)
 438              FLOOR=4.1.2
 439              CEILING=4.1.2
 440              DESC="An expansion of the PDroid application/framework."
 441              DEV="CollegeDev"
 442              DEPENDENCY="The free PDroid2.0 app available at http://forum.xda-developers.com/showthread.php?t=1923576"
 443              ;;
 444         openpdroid)
 445              FLOOR=4.1.2
 446              CEILING=4.2.1
 447              DESC="A fork of the open-source PDroid and Pdroid2.0 framework."
 448              DEV="FFU5y/wbedard/mateorod/Community"
 449              DEPENDENCY="The PDroidManager app freely available from Google Play or http://forum.xda-developers.com/showthread.php?t=1994860"
 450              ;;
 451         opendroid)
 452              echo ""
 453              echo "No mod named 'opendroid'. You probably mean 'openpdroid'. Try again."
 454              PID="mods"
 455              mods_info
 456              ;;
 457         external_internal)
 458              FLOOR=2.3.3
 459              DESC="Swap internal and external storage."
 460              ;;
 461         insecure)
 462              FLOOR=2.3.3
 463              DESC="Make any boot.img insecure and allow remount as well as adb push/pull of system files. True root."
 464              ;;
 465         secure)
 466              FLOOR=2.3.3
 467              DESC="Make any boot.img secure."
 468              ;;
 469         3gdongle)
 470              FLOOR=4.1.0
 471              CEILING=4.2.1
 472              DESC="Allows 3gdongles to work on wifi tablets w/o 3rd party applications."
 473              DEV="trevd"
 474              DEPENDENCY="None, but read the troubleshooting guide at http://forum.xda-developers.com/showthread.php?t=1798631"
 475              ;;
 476         tabletUI)
 477              FLOOR=4.1.0
 478              CEILING=4.1.2
 479              DESC="Changes the user interface of Phones and Phablets to the popular Tablet UI."
 480              DEV="barmullio"
 481              ;;
 482         esac
 483      # strip decimals from android version (i.e. 2.3.7 becomes 237) so we can do math
 484      NVID=${VID//[.]/}
 485      COMPATF=${FLOOR//[.]/}
 486      COMPATC=${CEILING//[.]/}
 487 }
 488
 489 apk_check () {
 490      if [ -f patches/$P/$A/$R/$B/$FILE ]; then
 491           echo "... Patching $APK failed, but we will copy over a prepatched file ..."
 492           \cp -av patches/$P/$A/$R/$B/$FILE $FILE >> "$LOG"
 493      else
 494           print_error "failed patching $APK!!!"
 495      fi
 496 }
 497 compat_check () {
 498      for P in ${PID[@]}; do
 499           mods_info
 500           if [[ "$NVID" -lt "$COMPAT" ]]; then
 501                mismatch_error "Your Android $VID rom is too old! The minimum for $P is Android $FLOOR!"
 502           fi
 503           if [[ "$NVID" -gt "$COMPATC" ]]; then
 504                mismatch_error "Sorry, $P has not been made available for Android $VID yet!"
 505           fi
 506      done
 507 }
 508 extpath () {
 509      case `uname -s` in
 510      CYGWIN*)
 511           echo $(cygpath -da "$1")
 512           ;;
 513      *)
 514           echo $(abspath "$1")
 515           ;;
 516      esac
 517 }
 518
 519 #contains () { for e in "${@:2}"; do [[ "$e" = "$1" ]] && return 0; done; return 1; }
 520
 521 parse () { echo "${1%%_*}"; }
 522
 523 getbuildprop () {
 524      if [ -f system/build.prop ]; then
 525           result=(`grep $1 system/build.prop | tr -d '\r' | tr '=' ' '`)
 526           echo "${result[1]}"
 527      else
 528           echo ""
 529      fi
 530 }
 531
 532
 533 aosp_mod_check() {
 534      jar -xvf "$ROMX" system/framework/framework2.jar >> $LOG
 535      if [ -s system/framework/framework2.jar ]; then
 536           ever_check
 537      else
 538           AOSP=aosp-jb
 539      fi
 540 }
 541
 542 ever_check() {
 543      MID=$(getbuildprop ro.build.romversion)
 544      if [[ "$MID" == "Evervolv"* ]]; then
 545           AOSP=aosp-ever
 546      else
 547           MID=$(getbuildprop ro.build.display.id)
 548           if [[ "$MID" == "ev"* ]]; then
 549                AOSP=aosp-ever
 550           else
 551                AOSP=aosp-mod
 552           fi
 553      fi
 554 }
 555
 556 pa_check() {
 557      CMID=$(getbuildprop ro.modversion)
 558      PAID=$(getbuildprop ro.pa.version)
 559      MID=$(getbuildprop ro.build.display.id)
 560      [[ "$MID" == "" ]] && MID=$(parse $(getbuildprop ro.build.display.id))
 561      DID=$(getbuildprop ro.product.device)
 562      [[ "$DID" == "" ]] && DID=$(getbuildprop ro.build.product)
 563           if [[ -n $PAID ]]; then
 564               RID=pa
 565           else
 566                case $CMID in
 567                     [Pp][Aa]*)
 568                           RID=pa;
 569                           ;;
 570                      *)
 571                           RID=cm;
 572                           ;;
 573                esac
 574           fi
 575 }
 576
 577 proberom () {
 578      VID=$(getbuildprop ro.build.version.release)
 579      ANDR="${VID%.*}" # Cut flavor to 1 significant digit to cover specific range or release.
 580      if [ "$ANDR" == "2.3" ]; then
 581           FLAVR=gingerbread
 582           API=10
 583           RID=cm;
 584      elif [ "$ANDR" == "4.0" ]; then
 585           FLAVR=ics
 586           API=15
 587           MID=$(getbuildprop ro.rommanager.developerid)
 588           [[ "$MID" == "" ]] && MID=$(parse $(getbuildprop ro.modversion))
 589           DID=$(getbuildprop ro.product.device)
 590           [[ "$DID" == "" ]] && DID=$(getbuildprop ro.build.product)
 591
 592           case "$MID" in
 593                pa|cm9|cm|cyanogenmod*)
 594                     RID=cm;
 595                          ;;
 596                     aokp|teamkang)
 597                          RID=aokp;
 598                          ;;
 599                     aosp*)
 600                          RID=aosp;
 601                          ;;
 602                     *)
 603                          echo "!!! $MID is not supported yet, trying generic latest !!!"
 604                          ;;
 605           esac
 606      elif [ "$ANDR" == "4.1" ]; then
 607           FLAVR=jellybean
 608           API=16
 609           CMID=$(getbuildprop ro.cm.version)
 610                if [[ -n $CMID ]]; then
 611                     pa_check
 612                else
 613                           MID=$(getbuildprop ro.build.display.id)
 614                           [[ "$MID" == "" ]] && MID=$(parse $(getbuildprop ro.build.display.id))
 615                           DID=$(getbuildprop ro.product.device)
 616                           [[ "$DID" == "" ]] && DID=$(getbuildprop ro.build.product)
 617                           case "$MID" in
 618                               cm10|cm*|cyanogenmod*)
 619                                       RID=cm;
 620                                       ;;
 621                               aokp*|teamkang)
 622                                       RID=aokp;
 623                                       ;;
 624                         pa*)
 625                              RID=pa;
 626                              ;;
 627                         ev*)
 628                              RID=aosp-ever;
 629                              ;;
 630                         *)
 631                                       RID=`aosp_mod_check`;
 632                                       ;;
 633                           esac
 634                fi
 635      elif [ "$ANDR" == "4.2" ]; then
 636           FLAVR=jellybean
 637           API=17
 638           CMID=$(getbuildprop ro.cm.version)
 639           MID=$(getbuildprop ro.build.display.id)
 640           [[ "$MID" == "" ]] && MID=$(parse $(getbuildprop ro.build.display.id))
 641           DID=$(getbuildprop ro.product.device)
 642           [[ "$DID" == "" ]] && DID=$(getbuildprop ro.build.product)
 643
 644                case "$MID" in
 645                     cm10|cm*|cyanogenmod*)
 646                          RID=cm;
 647                          ;;
 648                     aokp*|teamkang)
 649                          RID=aokp;
 650                          ;;
 651                     pa*) # Defaults to cm for now, since there is a chance we can patch forks
 652                          RID=cm;
 653                          ;;
 654                     *)
 655                             RID=aosp;
 656                                   ;;
 657                esac
 658      else
 659           print_error "unknown ROM version $VID"
 660      fi
 661      echo "... result of ROM check: version= $VID rom= $RID ..."
 662 }
 663
 664 # Advanced build date query
 665 # This should set the patch date automatically.
 666
 667 buildquery() {
 668 UTC=$(getbuildprop ro.build.date.utc)
 669
 670 # Difference in how OS X and Linux/Cygwin handles 'date' utility
 671 case `uname -s` in
 672         [Dd]arwin)
 673              BDID=`date -r $UTC +%Y%m%d`
 674              echo "#### Darwin Build Query used ####" >> "$LOG"
 675              ;;
 676         *)
 677              BDID=`date -d "1970-01-01 UTC $UTC seconds" +"%Y%m%d"`
 678              echo "#### Standard Build Query ####" >> "$LOG"
 679              ;;
 680 esac
 681
 682 # If patch date is specified on CLI, use that patch date
 683 if [ $# -gt 3 ]; then
 684         BID=${4//,/ };
 685 else
 686      case $ANDR in
 687           gingerbread)
 688                # CM7 roms do not have UTC time stamp- so no build query.
 689                BID=latest;
 690                echo "*** CM7 roms default to latest patches. If using an older rom ***"
 691                echo "*** specify patch date on command line. Use -h to see available patches ***"
 692                ;;
 693           *)
 694                for P in ${PID[@]}; do
 695                     [ -d patches/$P/$ANDR ] && A=$ANDR || A=all
 696                     [ -d patches/$P/$A/$RID ] && R=$RID || R=generic
 697                     [ -d patches/$P/$A/$R/$BID ] && B=$BID || B=latest
 698                     PAR=patches/$P/$A/$R
 699                     PARB=patches/$P/$A/$R/$B
 700                     DATES=`ls patches/$P/$A/$R/ | grep '201*'`
 701              # Intialize variable - High so as to determine lowest in first loop.
 702                     BID=20201231
 703                          # find earliest available patch date
 704                          for i in $DATES; do
 705                               if [[ $i -lt $BID ]]; then
 706                                    BID=$i
 707                               fi
 708                          done
 709        # Check if earliest patches are from before build date. Else use earliest
 710
 711                         # If older than earliest patch set, then find best match
 712                          if [[ $(($BID-$BDID)) -lt 0 ]]; then
 713                               for g in $DATES; do
 714                                    # use any patch that matches $UTC
 715                                    if [[ $(($BDID-$g)) -eq 0 ]]; then
 716                                         BID=$g
 717                                         break
 718                                    # Set highest $BID w/o going over $UTC
 719                                    elif [[ $(($BDID-$g)) -gt 0 ]] && [[ $g -gt $BID ]]; then
 720                                         BID=$g
 721                                    fi
 722                               done
 723                          fi
 724                          echo "... $PID patch date has been set to: $BID..."
 725                          B=$BID
 726                          break
 727                done
 728                ;;
 729      esac
 730 fi
 731 }
 732
 733 proberil () {
 734         RIL=$(getbuildprop ro.telephony.ril_class)
 735         [[ -n $RIL ]] && printtask "... result of ROM check: RIL= $RIL"
 736 }
 737
 738 rominfo () {
 739 echo "# VER= $VERSION" >> "$LOG"
 740 echo "# OS=  $OSTYPE ${BIT}bit" >> "$LOG"
 741 echo "# VID= $VID" >> "$LOG"
 742 echo "# PID= ${PID[@]}" >> "$LOG"
 743 echo "# MID= $MID" >> "$LOG"
 744 echo "# RID= $RID" >> "$LOG"
 745 echo "# ANDR= $ANDR" >> "$LOG"
 746 echo "# BDID= $BDID" >> "$LOG"
 747 echo "# DID= $DID" >> "$LOG"
 748 echo "# BID= $BID" >> "$LOG"
 749
 750 }
 751
 752 if [[ $1 == -h ]]; then
 753      if [ $# -gt 1 ]; then
 754           PID=$2
 755           mods_info
 756           echo ""
 757           echo "The Auto-Patcher $VERSION by Mateorod and Pastime1971"
 758           echo "*************************************************"
 759           echo ""
 760           echo "Mod Name:    $PID"
 761           echo ""
 762           echo "    $DESC"
 763           echo "$DESC1"
 764           echo ""
 765           echo "Developer: $DEV"
 766           echo "Dependancies: $DEPENDENCY"
 767           echo ""
 768           echo "Works on Android ROMs from $FLOOR to $CEILING"
 769           echo
 770           exit
 771      fi
 772 fi
 773
 774 [[ $# -lt 1 || -z $1 ]] && PID="mods" && mods_info
 775 [[ $1 == "-h" ]] && usage_more_help | less && display_help
 776
 777 echo ""
 778 echo "The Auto-Patcher $VERSION"
 779 echo ""
 780 # by pastime1971 and mateorod
 781
 782 ROOT=$(abspath `dirname "$0"`)
 783 TOOL="$ROOT/patch_tools.tgz"
 784 PTCH="$ROOT/patch_patches.tgz"
 785 ROM=$(abspath "$1")
 786 ROMX=$(extpath "$1")
 787
 788 if [[ $OSTYPE == "cygwin" ]]; then
 789         EXE=".exe"
 790         PGFORM="0x"
 791 fi
 792
 793 DATE=`date +%Y%m%d%H%M%S`
 794 TEMP=$(abspath ./tmp$DATE)
 795 LOG=$(abspath ./log$DATE.txt)
 796 #echo $ROOT $TOOL $ROM $TEMP "$LOG"
 797 echo "ROOT= $ROOT" >> "$LOG"
 798 echo "TOOL= $TOOL" >> "$LOG"
 799 echo "ROM=  $ROM" >> "$LOG"
 800 echo "ROMX= $ROMX" >> "$LOG"
 801
 802 \rm -f restore.zip update.zip
 803
 804 CHK=$(getconf LONG_BIT)
 805 if [[ $CHK = "64" ]]; then
 806         BIT=64
 807 else [[ $BIT = "32" ]];
 808         BIT=32
 809 fi
 810
 811
 812 printtask "### verify tools ###"
 813 which patch >> "$LOG" || misstools_error "Missing \"patch diff command\""
 814 which tar >> "$LOG" || misstools_error "Missing \"tar archive command\""
 815 which jar >> "$LOG" || misstools_error "Missing \"jar (JDK)\""
 816 which java >> "$LOG" || misstools_error "Missing \"java (JRE)\""
 817 which cpio >> "$LOG" || misstools_error "Missing \"cpio archive command\""
 818 [ -f "$TOOL" ] || misspatch_error "patch tool is missing"
 819 [ -f "$PTCH" ] || misspatch_error "patch patches are missing"
 820 printtask "### verify ROM ###"
 821 [ -f "$ROM" ] || print_error "Cannot find $ROM"
 822 echo "### running $0 $@" >> "$LOG"
 823 mkdir "$TEMP"
 824 cd "$TEMP"
 825
 826 PATH="$TEMP:$PATH"
 827 export PATH
 828 echo "PATH= $PATH" >> "$LOG"
 829
 830 printtask "### unzip patch tools ###"
 831 tar xzf "$TOOL" > /dev/null || print_error "failed extracting tools !!!"
 832
 833 # Get OS specific tools
 834      case `uname -s` in
 835            CYGWIN*)
 836                \mv cygwin/aapt.exe .
 837                \mv cygwin/*.exe boot/
 838                \rm -rf cygwin # why? If you want to we can keep/add it to mac/linux, though.
 839                ;;
 840           [Dd]arwin)
 841                \mv mac/aapt .
 842                ;;
 843           [Ll]inux)
 844                \mv linux/aapt .
 845                ;;
 846           *)
 847                \mv linux/aapt .
 848                ;;
 849      esac
 850 # Ensure aapt permissions - possibly to one day be expanded to all tools in a function.
 851 chmod a+x aapt$EXE
 852
 853 printtask "### unzip patch patches ###"
 854 tar xzf "$PTCH" > /dev/null || print_error "failed extracting patches !!!"
 855
 856 # we need build.prop for both RIL probing and ROM probing
 857 jar -xvf "$ROMX" system/build.prop 2>> "$LOG" || print_error "failed extracting build.prop from $ROMX !!!"
 858
 859 # rom + ril type
 860 proberil
 861 printtask "### probe rom type ###"
 862 proberom
 863
 864 # rom type
 865 if [ $# -gt 1 ]; then
 866         PIT=$2
 867         if [[ "$PIT" = "-h" ]]; then
 868               display_help
 869         fi
 870 fi
 871 if [ $# -gt 2 ]; then
 872         RID=$3
 873      case "$RID" in
 874                 cm10|cm*|cyanogenmod*)
 875                         ;;
 876                 aokp*|teamkang)
 877                         RID=aokp;
 878                         ;;
 879           pa*)
 880                RID=pa;
 881                ;;
 882           aosp-ever)
 883                RID=aosp-ever;
 884                ;;
 885           aosp*)
 886                   case "ANDR" in
 887                     4.1)
 888                          RID=`aosp_mod_check`;
 889                          ;;
 890                     *)
 891                          RID=aosp
 892                          ;;
 893                esac
 894                ;;
 895           201*)
 896                date_error "You must specify ROMTYPE if designating a patch date!!"
 897                ;;
 898           *)
 899                rom_error "$RID is not a valid ROMTYPE!!"
 900                ;;
 901         esac
 902         echo "... Using $RID patches ..."
 903 else
 904         echo "... Using results of ROM check ..."
 905 fi
 906
 907 # patch type
 908 if [ $# -gt 1 ]; then
 909         PIL=${2//,/ } # If more than one mod, make string separated by spaces
 910 else
 911         PIL="pdroid v6supercharger"
 912      echo "No mods selected. Defaulting to the v6 and Pdroid, just because we can."
 913 fi
 914
 915 PID=(${PIL// / }) # turn string into array
 916 COPYPID=("${PID[@]}") # working copy to iterate over
 917 MODS_NUMBER=${#COPYPID[@]} # number of elements (mods)
 918
 919 if [[ $MODS_NUMBER > 1 ]]; then
 920 INDEX=0
 921      for p in ${COPYPID[@]}; do
 922           if [ "$p" = "pdroid" ] || [ "$p" = "pd2.0" ] ||[ "$p" = "openpdroid" ]; then
 923                SPID[0]=$p
 924                unset COPYPID["$INDEX"]
 925                break
 926           else
 927                INDEX=$((INDEX + 1))
 928           fi
 929      done
 930      for p in ${COPYPID[@]}; do
 931           if [ "$p" = "pdroid" ] || [ $p = "pd2.0" ] ||[ $p = "openpdroid" ]; then
 932                conflict_error "Those mods conflict! Only one pdroid mod at a time!"
 933           else
 934                i=${#SPID[@]}
 935                SPID[i]=$p
 936                i+=1
 937           fi
 938      done
 939 else
 940      SPID=${COPYPID[@]}
 941      echo "only one mod found, mod is ${SPID[@]}"
 942 fi
 943 for P in ${PIL[@]}; do
 944         [[ ${PID[@]} =~ $P ]] || PID=(${PID[@]} $P)
 945 done
 946
 947 # Check to make sure selected roms are available for the Android version of patched ROM
 948 compat_check
 949
 950 # Build date
 951 if [ $# -gt 3 ]; then
 952         BID=$4
 953         # even here, we should try and create a function that matches as close to the above
 954         # BID as possible. Now, a bad match (user error) defaults to latest
 955         echo "... $PID patch date set manually to $BID ..."
 956 else
 957         buildquery
 958 fi
 959
 960 # echo ROM info
 961 rominfo
 962
 963 # I think I finally may have rendered this VERY long if statement obsolete...CHECK!
 964 if [[ ( "$PID" == "-h" || "$RID" == "-h" || "$BID" == "-h" ) ]]; then
 965         display_help
 966 else
 967
 968 #Begin cycle
 969
 970      for P in ${PID[@]}; do
 971           [ -d patches/$P ] || print_error "$P is not available"
 972           [ -d patches/$P/$ANDR ] && A=$ANDR || A=all
 973           [ -d patches/$P/$A/$RID ] && R=$RID || R=generic
 974           [ -d patches/$P/$A/$R/$BID ] && B=$BID || B=latest
 975
 976           unset FILES
 977           [ -f patches/$P/files.txt ] && FILES=$(cat patches/$P/files.txt)
 978           [ -f patches/$P/$A/files.txt ] && FILES=$(cat patches/$P/$A/files.txt)
 979           [ -f patches/$P/$A/$R/files.txt ] && FILES=$(cat patches/$P/$A/$R/files.txt)
 980           [ -f patches/$P/$A/$R/$B/files.txt ] && FILES=$(cat patches/$P/$A/$R/$B/files.txt)
 981           for FILE in ${FILES[@]}; do
 982                case "$FILE" in
 983                +system/*)
 984                     [[ ${CID[@]} =~ ${FILE:1} ]] && print_error "${FILE:1} is already being copied" || CID=(${CID[@]} ${FILE:1})
 985                     ;;
 986                -system/*)
 987                     [[ ${EID[@]} =~ ${FILE:1} ]] || EID=(${EID[@]} ${FILE:1})
 988                     ;;
 989                system/*.jar)
 990                     [[ ${JID[@]} =~ $FILE ]] || JID=(${JID[@]} $FILE)
 991                     echo "set_perm(0, 0, 0644, \"/$FILE\");" >> UPDATE.txt
 992                     ;;
 993                system/*.apk)
 994                     [[ ${AID[@]} =~ $FILE ]] || AID=(${AID[@]} $FILE)
 995                     echo "set_perm(0, 0, 0644, \"/$FILE\");" >> UPDATE.txt
 996                     ;;
 997                *.img)
 998                     [[ ${IID[@]} =~ $FILE ]] || IID=(${IID[@]} $FILE)
 999                     ;;
1000                system/*)
1001                     [[ ${TID[@]} =~ $FILE ]] || TID=(${TID[@]} $FILE)
1002                     ;;
1003                esac
1004           done
1005      done
1006      echo "### DELETE FILES= ${EID[@]}" >> "$LOG"
1007      echo "### COPY FILES= ${CID[@]}" >> "$LOG"
1008      echo "### JAR FILES= ${JID[@]}" >> "$LOG"
1009      echo "### APK FILES= ${AID[@]}" >> "$LOG"
1010      echo "### IMG FILES= ${IID[@]}" >> "$LOG"
1011      echo "### TXT FILES= ${TID[@]}" >> "$LOG"
1012
1013      printtask "### unzip rom ###"
1014      # extract system files
1015      jar -xvf "$ROMX" ${JID[@]} ${AID[@]} ${IID[@]} ${TID[@]} 2>> "$LOG" || print_error "failed extracting ${JID[@]} ${AID[@]} ${IID[@]} from $ROMX !!!"
1016
1017      printtask "### create updater script ###"
1018      jar -xvf "$ROMX" META-INF/com/google/android/updater-script META-INF/com/google/android/update-binary
1019      jar -xvf "$ROMX" META-INF/com/google/android/update-binary-installer 1> /dev/null 2> /dev/null
1020      if [ -f META-INF/com/google/android/update-binary-installer ]; then
1021           printtask "... using Aroma installer ..."
1022           \mv META-INF/com/google/android/update-binary-installer META-INF/com/google/android/update-binary
1023      else
1024           printtask "... using Clockworkmod installer ..."
1025      fi
1026      if [ -f META-INF/com/google/android/update-binary ]; then
1027           cat META-INF/com/google/android/updater-script | grep ^mount | grep "/system" | head -n 1 > updater-script
1028           [ -s updater-script ] || echo "run_program(\"/sbin/busybox\", \"mount\", \"/system\");" > updater-script
1029           for FILE in ${EID[@]}; do
1030                # restore the original
1031                jar -xvf "$ROMX" $FILE 2> /dev/null || printtask "!!! warning $FILE cannot be restored !!!"
1032           done
1033           for FILE in ${CID[@]}; do
1034                # replace with the original or delete it
1035                jar -xvf "$ROMX" $FILE 2> /dev/null || echo "delete(\"/$FILE\");" >> updater-script
1036           done
1037           echo "package_extract_dir(\"system\", \"/system\");" >> updater-script
1038           # add permission management
1039           cat META-INF/com/google/android/updater-script | grep set_perm | grep "/system" >> updater-script
1040           # TODO: remove if we don't need it any more
1041           for P in ${PID[@]}; do
1042                if [ -s patches/$P/$A/set_perm.txt ]; then
1043                     echo "...setting permissions..."
1044                     cat patches/$P/$A/set_perm.txt >> updater-script
1045                fi
1046           done
1047           cat META-INF/com/google/android/updater-script | grep ^unmount | grep "/system" | head -n 1 >> updater-script
1048           [[ ${IID[@]} =~ boot.img ]] && cat META-INF/com/google/android/updater-script | grep "boot.img" >> updater-script
1049           cat updater-script > META-INF/com/google/android/updater-script
1050           echo "# generated updater-script" >> "$LOG"
1051           cat updater-script >> "$LOG"
1052      else
1053           # this is not enough any more
1054           jar -xvf update-template.zip META-INF/com/google/android/update-binary META-INF/com/google/android/updater-script
1055      fi
1056
1057      printtask "### create restore.zip ###"
1058      jar -cvf tmp.zip ${JID[@]} ${AID[@]} ${IID[@]} META-INF > /dev/null 2>> "$LOG"
1059      java -jar signapk.jar updatecert.pem updatekey.pk8 tmp.zip signed.zip 2>> "$LOG"
1060      \mv signed.zip restore.zip
1061      \rm -f tmp.zip
1062
1063      printtask "### decompile system files ###"
1064
1065      # decompile system files
1066      for FILE in ${JID[@]}; do
1067           JAR=${FILE##*/}
1068           printtask "... decompile $JAR ..."
1069           java -jar baksmali.jar -b -a $API -o tmp/${FILE}.out/smali ${FILE} >> "$LOG" 2>> "$LOG"
1070           if [ $FILE == "system/framework/framework.jar" ]; then
1071                printtask "... extract preloaded-classes ..."
1072                jar -xvf ${FILE} preloaded-classes >> "$LOG" 2>> "$LOG"
1073                \mv preloaded-classes tmp/${FILE}.out/
1074           fi
1075      done
1076
1077         # Pull framework-files for APK...
1078           if [ ${#AID[@]} -gt 0 ]; then
1079                jar -xvf "$ROMX" system/framework/framework-res.apk >> "$LOG"
1080                printtask "... installing framework files ..."
1081                      java -jar apktool.jar if system/framework/framework-res.apk
1082         # Decompile APKs
1083                   for FILE in ${AID[@]}; do
1084                           APK=${FILE##*/}
1085                     if [ -f $FILE ]; then
1086                                printtask "... decompile $APK ..."
1087                                java -jar apktool.jar d -f $FILE tmp/$FILE.out
1088                     fi
1089                done
1090           fi
1091
1092      # Unpack image files {boot.img only so far...}
1093      for FILE in ${IID[@]}; do
1094           printtask "### unpacking $FILE ###"
1095           case "$FILE" in
1096                boot.img)
1097                     if [ -f boot.img ]; then
1098                          cd boot
1099                          ./unpackbootimg$EXE -i ../boot.img >> "$LOG" 2>> "$LOG"
1100                          mkdir ramdisk
1101                          cd ramdisk
1102                          gzip -dc ../boot.img-ramdisk.gz | cpio -i >> "$LOG" 2>> "$LOG"
1103                          cd ../../
1104                     else
1105                          print_error "A mod needs to patch boot.img! This rom does not contains boot.img."
1106                     fi
1107                     ;;
1108                *)
1109                     print_error "cannot process $FILE"
1110                     ;;
1111           esac
1112      done
1113
1114         # apply system modification
1115
1116      for P in ${PID[@]}; do
1117           [ -d patches/$P/$ANDR ] && A=$ANDR || A=all
1118           [ -d patches/$P/$A/$RID ] && R=$RID || R=generic
1119           [ -d patches/$P/$A/$R/$BID ] && B=$BID || B=latest
1120           PAR=patches/$P/$A/$R
1121           PARB=patches/$P/$A/$R/$B
1122
1123           unset FILES COPY DELS JARS APKS IMGS TXTS
1124           [ -f patches/$P/files.txt ] && FILES=$(cat patches/$P/files.txt)
1125           [ -f patches/$P/$A/files.txt ] && FILES=$(cat patches/$P/$A/files.txt)
1126           [ -f patches/$P/$A/$R/files.txt ] && FILES=$(cat patches/$P/$A/$R/files.txt)
1127           [ -f patches/$P/$A/$R/$B/files.txt ] && FILES=$(cat patches/$P/$A/$R/$B/files.txt)
1128           for FILE in ${FILES[@]}; do
1129                case $FILE in
1130                     +system/*)
1131                          COPY=(${COPY[@]} ${FILE:1})
1132                          ;;
1133                     -system/*)
1134                          DELS=(${DELS[@]} ${FILE:1})
1135                          ;;
1136                     system/*.jar)
1137                          JARS=(${JARS[@]} $FILE)
1138                          ;;
1139                     system/*.apk)
1140                          APKS=(${APKS[@]} $FILE)
1141                          ;;
1142                     *.img)
1143                          IMGS=(${IMGS[@]} $FILE)
1144                          ;;
1145                     system/*)
1146                          TXTS=(${TXTS[@]} $FILE)
1147                          ;;
1148                esac
1149           done
1150
1151           [[ -n ${COPY[@]} ]] && printtask "### copy patch $P/$A/$R/$B ###"
1152           for FILE in ${COPY[@]}; do
1153                printtask "... copying $FILE ..."
1154                DEST=${FILE%/*}
1155                mkdir -p ./$DEST
1156                if [ -e patches/$P/$A/$R/$B/$FILE ]; then
1157                     [ -e $FILE ] && printtask "... overwriting $FILE from $P ..."
1158                     \cp -av patches/$P/$A/$R/$B/$FILE ./$DEST >> "$LOG"
1159                else
1160                     print_error "$FILE is missing in the patch. Please upload your logfile to the support thread!"
1161                fi
1162           done
1163
1164           # unconditional smali copying
1165           [ -f patches/$P/smali.txt ] && SMALI=$(cat patches/$P/smali.txt)
1166           [ -f patches/$P/$A/smali.txt ] && SMALI=$(cat patches/$P/$A/smali.txt)
1167           [ -f patches/$P/$A/$R/smali.txt ] && SMALI=$(cat patches/$P/$A/$R/smali.txt)
1168           [ -f patches/$P/$A/$R/$B/smali.txt ] && SMALI=$(cat patches/$P/$A/$R/$B/smali.txt)
1169           MOVE=${SMALI##*/}
1170           for SMALI in ${SMALI[@]}; do
1171                 if [ -f patches/$P/$A/$R/provisionals/$SMALI ]; then
1172                      printtask "... overwriting $MOVE ..."
1173                      \cp -a patches/$P/$ANDR/$R/provisionals/$SMALI tmp/$SMALI >> "$LOG"
1174                 elif [ -f patches/$P/$A/provisionals/$SMALI ]; then
1175                      printtask "... overwriting $MOVE ..."
1176                      \cp -a patches/$P/$ANDR/provisionals/$SMALI tmp/$SMALI >> "$LOG"
1177                 fi
1178           done
1179
1180           [[ -n ${DELS[@]} ]] && printtask "### delete patch $P/$A/$R/$B ###"
1181           for FILE in ${DELS[@]}; do
1182                printtask "... deleting $FILE ..."
1183                \rm -rf ./$FILE
1184           done
1185           [[ -n ${JARS[@]} ]] && printtask "### jar patch $P/$A/$R/$B ###"
1186           for FILE in ${JARS[@]}; do
1187                JAR=${FILE##*/}
1188                NAME=${JAR%.jar}
1189                printtask "... apply $NAME.patch ..."
1190                patch -Nls -p1 -d tmp/${FILE}.out < $PARB/${NAME}.patch 2>&1 > ${JAR}.log
1191                cat ${JAR}.log | tee -a "$LOG"
1192                case "$NAME" in
1193                     framework)
1194                          # patch preloaded-classes only if a patch exists
1195                          if [ -f $PARB/preloaded.patch ]; then
1196                               printtask "... apply preloaded.patch ..."
1197                               patch -Nls -p1 -d tmp/${FILE}.out < $PARB/preloaded.patch 2>&1 > preloaded.log
1198                               cat preloaded.log | tee -a "$LOG"
1199                               [[ `grep FAILED preloaded.log` != "" ]] && print_error "failed preloaded.patch"
1200                          fi
1201                          ;;
1202                     *)
1203                          echo -n ""     # do nothing else
1204                          ;;
1205                esac
1206                # substitute failed smali with premade jar
1207                unset FAILS
1208                FAILS=(`grep FAILED ${JAR}.log | sed -e 's/.*smali\///' | sed -e "s/\.rej'//"`)
1209                if [[ -n ${FAILS[@]} ]]; then
1210                     printtask "!!! PATCHING FAILED FOR ${FAILS[@]} !!!"
1211                     echo "### replace ${FAILS[@]} ###" > ${JAR}.log
1212                     for FAIL in ${FAILS[@]}; do
1213                          echo "!!! patch error for $FAIL !!!" >> "$LOG"
1214                          #cat tmp/$FILE.out/smali/${FAIL}.rej >> "$LOG"
1215                          [[ ${SID[@]} =~ $FAIL ]] && print_error "$FAIL was already replaced before"
1216                          [ -f patches/$P/$ANDR/provisionals/${FILE}.out/smali/${FAIL} ] || print_error "failed $FAIL in $JAR cannot be remedied"
1217                          copyfailed || print_error "failed $NAME.patch"
1218                          printtask "... replace $FAIL ..."
1219                          \rm -rf tmp/${FILE}.out/smali/${FAIL} tmp/${FILE}.out/smali/${FAIL}.orig tmp/${FILE}.out/smali/${FAIL}.rej
1220                          \cp -av  patches/$P/$ANDR/provisionals/${FILE}.out/smali/${FAIL} tmp/${FILE}.out/smali/${FAIL} >> "$LOG" || echo "FAILED to cp $FAIL" >> ${JAR}.log
1221                          SID=(${SID[@]} $FAIL)
1222                     done
1223                fi
1224                [[ `grep FAILED ${JAR}.log` != "" ]] &&  print_error "failed $NAME.patch"
1225                garbage tmp/${FILE}.out
1226                if [ -f patches/$P/$A/$R/$B/${JAR}.sh ]; then
1227                     printtask "... apply $JAR.sh ..."
1228                     . patches/$P/$A/$R/$B/${JAR}.sh 2>&1 > ${JAR}.log
1229                     cat ${JAR}.log | tee -a "$LOG"
1230                fi
1231           done
1232
1233           [[ -n ${APKS[@]} ]] && printtask "### apk patch $P/$A/$R/$B ###"
1234           for FILE in ${APKS[@]}; do
1235                APK=${FILE##*/}
1236                if [ -d "tmp/${FILE}.out" ] ; then
1237                     printtask "... apply $APK.patch ..."
1238                     patch -Nls -p2 -d tmp/${FILE}.out < $PARB/${APK}.patch 2>&1 >> ${APK}.log
1239                     cat ${APK}.log | tee -a "$LOG"
1240                     [[ `grep FAILED ${APK}.log` != "" ]] && apk_check
1241                     garbage tmp/${FILE}.out
1242                else
1243                     echo "No $APK in your ROM. Not able to patch this file."
1244                     echo "## No $APK in ROM ###" >> "$LOG"
1245                fi
1246           done
1247           [[ -n ${IMGS[@]} ]] && printtask "### img patch $P/$A/$R/$B ###"
1248           for FILE in ${IMGS[@]}; do
1249                IMG=${FILE##*/}
1250                printtask "... applying $IMG.patch ..."
1251                patch -Nls -p1 -d boot/ramdisk < $PARB/${IMG}.patch >> "$LOG" || print_error "failed patching $FILE"
1252           done
1253
1254           [[ -n ${TXTS[@]} ]] && printtask "### text patch $P/$A/$R/$B ###"
1255           for FILE in ${TXTS[@]}; do
1256                TXT=${FILE##*/}
1257                if [[ -f $PARB/${TXT}.patch ]]; then
1258                     printtask "... apply $TXT.patch ..."
1259                     patch -Nls -p2 -d system/ < $PARB/${TXT}.patch 2>&1 > ${TXT}.log
1260                     #cat ${TXT}.log | tee -a "$LOG"
1261                     [[ `grep FAILED ${TXT}.log` != "" ]] && print_error "failed $TXT.patch"
1262                fi
1263                if [[ -f $PAR/${TXT}.awk ]]; then
1264                     printtask "... apply $TXT.awk ..."
1265                     awk -f $PAR/${TXT}.awk $FILE > text || print_error "failed $TXT.awk"
1266                     mv text $FILE
1267                fi
1268                if [[ -f $PAR/${TXT}.sed ]]; then
1269                     printtask "... apply $TXT.sed ..."
1270                     sed -f $PAR/${TXT}.sed $FILE > text || print_error "failed $TXT.sed"
1271                     mv text $FILE
1272                fi
1273                if [[ -f $PAR/${TXT}.sh ]]; then
1274                     printtask "... apply $TXT.sh ..."
1275                     . $PAR/${TXT}.sh 2>&1 >> ${TXT}.log || print_error "failed $TXT.sh"
1276                fi
1277                garbage system/
1278           done
1279      done
1280
1281      # Device specific scripts- Placement is up-for-review
1282      if [ -f patches/devices/$DID/$DID.sh ]; then
1283           . patches/devices/$DID/$DID.sh
1284      fi
1285      # Replace updater-script for CM7-- Testing
1286      if [ "$ANDR" == "gingerbread" ]; then
1287           replace_updater
1288      fi
1289 # Rebuilding system files
1290
1291      [[ -n ${JID[@]} ]] && printtask "### rebuild jar ###"
1292      for FILE in ${JID[@]}; do
1293           JAR=${FILE##*/}
1294           printtask "... rebuild $JAR ..."
1295           java -Xmx512M -jar smali.jar -a $API tmp/${FILE}.out/smali -o tmp/${FILE}.out/classes.dex >> "$LOG" 2>> "$LOG"
1296           [ -f tmp/${FILE}.out/classes.dex ] || smali_error "failed compiling $JAR !!!"
1297           jar -ufv ${FILE} -C tmp/${FILE}.out/ classes.dex >> "$LOG" 2>> "$LOG"
1298           if [ $FILE == "system/framework/framework.jar" ]; then
1299                jar -ufv ${FILE} -C tmp/${FILE}.out/ preloaded-classes >> "$LOG" 2>> "$LOG"
1300           fi
1301      done
1302
1303      [[ -n ${AID[@]} ]] && printtask "### rebuild apk ###"
1304      for FILE in ${AID[@]}; do
1305           APK=${FILE##*/}
1306           if [ -d tmp/${FILE}.out ]; then
1307                printtask "... rebuild $APK ..."
1308                java -jar apktool.jar b tmp/${FILE}.out >> "$LOG" 2>> "$LOG" || print_error "failed compiling $FILE !!!"
1309                jar -uvf $FILE -C tmp/${FILE}.out/build/apk/ . > /dev/null 2>> "$LOG"
1310           fi
1311      done
1312
1313      [[ -n ${IID[@]} ]] && printtask "### rebuild img ###"
1314      for FILE in ${IID[@]}; do
1315           printtask "### rebuild $FILE ###"
1316           case $FILE in
1317                boot.img)
1318                     # Rebuilding boot.img
1319                     cd boot
1320                     printtask "... rebuilding ramdisk ..."
1321                     ./mkbootfs$EXE ./ramdisk | gzip > ramdisk-new.gz
1322
1323                     printtask "... composing boot.img ..."
1324                     BASE=$(cat boot.img-base)
1325                     # hex to decimal in cygwin prefixing "0x" w/ C arithmetic
1326                     PGSIZE=$((${PGFORM}$(cat boot.img-pagesize)))
1327                     CMDLINE=$(cat boot.img-cmdline)
1328                     echo "cmdline = no_console_suspend=1 console=null $CMDLINE" >> "$LOG"
1329                     echo "pagesize = $PGSIZE" >> "$LOG"
1330                     echo "base = $BASE" >> "$LOG"
1331                     printtask "... rebuilding boot.img ..."
1332                     ./mkbootimg$EXE --kernel boot.img-zImage --ramdisk ramdisk-new.gz --cmdline "no_console_suspend=1 console=null $CMDLINE" --base "$BASE" --pagesize "$PGSIZE" -o ../boot.img || print_error "failed building boot.img"
1333                     cd ..
1334                     ;;
1335                *)
1336                     print_error "cannot process $FILE"
1337                     ;;
1338           esac
1339      done
1340
1341      printtask "### create update.zip ###"
1342      jar -cfv tmp.zip ${IID[@]} ${JID[@]} ${AID[@]} ${CID[@]} ${TID[@]} META-INF >> "$LOG" 2>> "$LOG"
1343      java -jar signapk.jar updatecert.pem updatekey.pk8 tmp.zip update.zip 2>> "$LOG"
1344
1345      \mv restore.zip update.zip ..
1346      echo "### finished ###"
1347      echo "flash update.zip to install the modified"
1348      echo "flash restore.zip to restore the original"
1349
1350      # add announcement- optional.
1351      for P in ${PID[@]}; do
1352           [ -d patches/$P/$ANDR ] && A=$ANDR || A=all
1353           [ -d patches/$P/$A/$RID ] && R=$RID || R=generic
1354           [ -d patches/$P/$A/$R/$BID ] && B=$BID || B=latest
1355           if [ -f patches/$P/$A/$R/$B/README.txt ]; then
1356                cat patches/$P/$A/$R/$B/README.txt
1357           elif [ -f patches/$P/$A/$R/README.txt ]; then
1358                cat patches/$P/$A/$R/README.txt
1359           elif [ -f patches/$P/$A/README.txt ]; then
1360                cat patches/$P/$A/README.txt
1361           fi
1362      done
1363 fi
1364 cd ..
1365 \rm -rf "$TEMP"