Updated Spanish translation

[anjuta-git-plugin.git] / manuals / anjuta-manual / es / es.po

# translation of anjuta.help.HEAD.po to Español
# Jorge González <jorgegonz@svn.gnome.org>, 2007, 2008.
msgid ""
msgstr ""
"Project-Id-Version: anjuta.help.HEAD\n"
"POT-Creation-Date: 2008-02-03 14:54+0000\n"
"PO-Revision-Date: 2008-02-03 19:42+0100\n"
"Last-Translator: Jorge González <jorgegonz@svn.gnome.org>\n"
"Language-Team: Español <gnome-es-list@gnome.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
"Plural-Forms:  nplurals=2; plural=(n != 1);\n"

#: C/anjuta-manual.xml:25(title)
msgid "Anjuta IDE Manual"
msgstr "Manual del EID Anjuta"

#: C/anjuta-manual.xml:26(edition)
msgid "v1.0.0"
msgstr "v1.0.0"

#: C/anjuta-manual.xml:28(para)
msgid "Manual for the Anjuta IDE"
msgstr "Manual para el  EID Anjuta"

#: C/anjuta-manual.xml:32(firstname)
msgid "Naba"
msgstr "Naba"

#: C/anjuta-manual.xml:33(surname)
msgid "Kumar"
msgstr "Kumar"

#: C/anjuta-manual.xml:36(firstname)
msgid "Andy"
msgstr "Andy"

#: C/anjuta-manual.xml:37(surname)
msgid "Piper"
msgstr "Piper"

#: C/anjuta-manual.xml:40(firstname)
msgid "Biswapesh"
msgstr "Biswapesh"

#: C/anjuta-manual.xml:41(surname)
msgid "Chattopadhyayr"
msgstr "Chattopadhyayr"

#: C/anjuta-manual.xml:44(firstname)
msgid "Johannes"
msgstr "Johannes"

#: C/anjuta-manual.xml:45(surname)
msgid "Schmid"
msgstr "Schmid"

#: C/anjuta-manual.xml:49(year)
msgid "2001-2002"
msgstr "2001-2002"

#: C/anjuta-manual.xml:50(year)
msgid "2006"
msgstr "2006"

#: C/anjuta-manual.xml:51(holder)
msgid "Naba Kumar, Andy Piper, Biswapesh Chattopadhyay"
msgstr "Naba Kumar, Andy Piper, Biswapesh Chattopadhyay"

#: C/anjuta-manual.xml:52(holder)
msgid "Johannes Schmid"
msgstr "Johannes Schmid"

#: C/anjuta-manual.xml:56(para)
msgid ""
"Permission is granted to copy, distribute and/or modify this document under "
"the terms of the <citetitle>GNU Free Documentation License</citetitle>, "
"Version 1.1 or any later version published by the Free Software Foundation "
"with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. "
"You may obtain a copy of the <citetitle>GNU Free Documentation License</"
"citetitle> from the Free Software Foundation by visiting <ulink type=\"http"
"\" url=\"http://www.fsf.org\">their Web site</ulink> or by writing to: Free "
"Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-"
"1301, USA."
msgstr ""
"Se concede permiso para copiar, distribuir o modificar este documento según "
"las condiciones de la <citetitle>GNU Free Documentation License</citetitle>, "
"Versión 1.1 o cualquier versión posterior publicada por la Free Software "
"Foundation sin Secciones invariantes, Textos de portada y Textos de "
"contraportada. Encontrará una copia de la <citetitle>GNU Free Documentation "
"License</citetitle> visitando su <ulink type=\"http\" url=\"http://www.fsf."
"org\">página web</ulink> o escribiendo a: Free Software Foundation, Inc., 51 "
"Franklin Street, Fifth Floor, Boston, MA 02110-1301, EE. UU."

#: C/anjuta-manual.xml:68(para)
msgid ""
"Many of the names used by companies to distinguish their products and "
"services are claimed as trademarks. Where those names appear in any GNOME "
"documentation, and those trademarks are made aware to the members of the "
"GNOME Documentation Project, the names have been printed in caps or initial "
"caps."
msgstr ""
"Muchos de los nombres usados por compañías para distinguir sus productos y "
"servicios se mencionan como marcas comerciales. Donde aparezcan dichos "
"nombres en cualquier documentación GNOME, y para que los miembros del "
"proyecto de documentación las reconozcan dichas marcas comerciales, dichos "
"nombres se imprimen en mayúsculas o iniciales mayúsculas."

#: C/anjuta-manual.xml:79(revnumber)
msgid "Anjuta Manual 2.1.0"
msgstr "Manual de Anjuta 2.1.0"

#: C/anjuta-manual.xml:80(date)
msgid "2007"
msgstr "2007"

#: C/anjuta-manual.xml:82(para)
msgid "Johannes Schmid<email>jhs@gnome.org</email>"
msgstr "Johannes Schmid<email>jhs@gnome.org</email>"

#: C/anjuta-manual.xml:84(para)
msgid "Anjuta Team"
msgstr "Equipo de Anjuta"

#: C/anjuta-manual.xml:3(title) C/anjuta-manual.xml:6(title)
msgid "Introduction"
msgstr "Introducción"

#: C/anjuta-manual.xml:4(para)
msgid ""
"<application>Anjuta</application> is a versatile Integrated Development "
"Environment (IDE) for the GNOME desktop. It features a number of advanced "
"programming facilities that include project management, application wizards, "
"an on-board interactive debugger, an integrated glade UI designer, "
"integrated devhelp API help, an integrated valgrind memory profiler, an "
"integrated gprof performance profiler, a class generator, a powerful source "
"editor, source browsing, and more. is a versatile Integrated Development "
"Environment"
msgstr ""
"<application>Anjuta</application> es un Editor Integrado de Desarrollo (EID) "
"versátil para el escritorio GNOME. Tiene ciertas características para "
"facilitar la programación que incluyen gestión de proyectos, asistentes de "
"aplicación, un depurador integrado intergrado, un diseñador de IU Glade "
"integrado, una ayuda API de devhelp integrada, un perfilador de memoria "
"valgrind integrado, un perfilador de rendimiento grpof integrado, un "
"generador de clases, un potente editor de código fuente, búsqueda de fuentes "
"y mucho más."

#: C/anjuta-manual.xml:15(para)
msgid ""
"Anjuta DevStudio has been designed to be simple to operate yet powerful "
"enough to fullfil all your programming needs. Many features have evolved "
"since the early days and several very attractive ones added. Our focus is on "
"delivering power and usability at the same time without overloading your "
"senses and making your software development a pleasurable process. We will "
"always be busy getting you one of the best IDE experiences by straighting up "
"all the neat features and stablizing it. We hope you will have a good time "
"using Anjuta. If not, please help us make it better by reporting bugs and "
"suggestions. Here are some of the things you will find in Anjuta."
msgstr ""
"Anjuta Devstudio se ha diseñado para ser simple de operar pero "
"suficientemente potente para cumplir con todos sus necesidades de "
"programación. Muchas características han evolucionado desde los primeros "
"días y se han añadido algunas otras muy atractivas. Los desarrolladores se "
"centran en proporcionar potencia y usabilidad al mismo tiempo sin "
"sobrecargar los sentidos y haciendo que el desarrollo de su software sea "
"placentero. Los desarrolladores siempre estarán ocupados para ofrecerle una "
"de las mejores experiencias con EID, mejorando todas las características y "
"estabilizándolo. Los desarrolladores esperan que pase un buen rato usando "
"Anjuta. De lo contrario, ayudelos a mejorar Anjuta informando de errores y "
"haciendo sugerencias. Éstas son algunas de las cosas que encontrará en "
"Anjuta."

#: C/anjuta-manual.xml:29(title) C/anjuta-manual.xml:31(screeninfo)
msgid "Anjuta in action"
msgstr "Anjuta en acción"

#: C/anjuta-manual.xml:37(para)
msgid ""
"Anjuta has a very flexible and advanced docking system that allows you to "
"layout all views in whatever way you like. You can drag and drop the views "
"using drag bars and re-arrange the layout. The layouts are persistent for "
"each project so you can maintain different layouts required by projects. All "
"dock views are minimizable to avoid clutter in main window. Minimized views "
"appear as icons on left side of main window. All menu actions are "
"configurable either by type-in-the-menu (the usual GNOME way) or by a "
"dedicated shortcuts configuration UI."
msgstr ""
"Anjuta tiene un sistema de empotramiento muy flexible y avanzado que le "
"permite disponer todas las vistas de la forma que quiera. Puede arrastrar y "
"soltar las vistas usando las barras de arrastre y reordenar la disposición. "
"Las disposiciones son persistentes para cada proyecto, de tal forma que "
"puede mantener distintas disposiciones especiales por proyectos. Todas las "
"vistas empotrables son minimizables para evitar el desorden en la ventana "
"principal. Las vistas minimizadas aparecen como iconos en la parte izquierda "
"de la ventana principal. Todas las acciones de los menús son configurables "
"escribiendo en el menú (la forma usual de GNOME) o por una interfaz de "
"configuración de los atajos de teclado."

#: C/anjuta-manual.xml:48(para)
msgid ""
"Please report any problems with <application>Anjuta</application> - this "
"will help to improve the software, as well as helping the Open Source "
"community."
msgstr ""
"Por favor, informe de cualquier problema con <application>Anjuta</"
"application>: esto ayudará a mejorar el software así como ayuda a la "
"comunidad código abierto («Open Source»)."

#: C/anjuta-manual.xml:2(title)
msgid "Getting Familiar with Anjuta"
msgstr "Familiarizarse con Anjuta"

#: C/anjuta-manual.xml:5(title)
msgid "Menus and shortcuts"
msgstr "Menús y atajos de teclado"

#: C/anjuta-manual.xml:6(para)
msgid ""
"At the top of the <application>Anjuta</application> main window is the "
"menubar. Almost all of the functions are available by activating the "
"appropriate menu item. The functions have been grouped according to their "
"type. For example, the file operations have been grouped into the "
"<guisubmenu>File</guisubmenu> menu."
msgstr ""
"En la parte superior de la ventana principal de <application>Anjuta</"
"application> está la barra de menú. Casi todas las funciones están "
"disponibles al activar el elemento del menú apropiado. Las funciones se han "
"agrupado de acuerdo con su tipo. Por ejemplo, las operaciones con archivos "
"se han agrupado dentro del menú <guisubmenu>Archivo</guisubmenu>."

#: C/anjuta-manual.xml:15(title)
msgid "Menubar"
msgstr "Barra de menú"

#: C/anjuta-manual.xml:17(screeninfo)
msgid "Anjuta menubar"
msgstr "Barra de menú de Anjuta"

#: C/anjuta-manual.xml:22(para)
msgid ""
"Most of the menus and submenus can be detached. Click on the detach bar (the "
"dashed line just above the first menu item). Once the menu is detached, it "
"will become an independent window."
msgstr ""
"La mayoría de los menús y submenús se pueden desacoplar. Pulse en la barra "
"de desacoplamiento (la línea en puntos suspensivos justo encima del primer "
"elemento del menú). Una vez que el menú está desacoplado, será una ventana "
"independiente."

#: C/anjuta-manual.xml:29(title) C/anjuta-manual.xml:31(screeninfo)
msgid "File menu"
msgstr "Menú Archivo"

#: C/anjuta-manual.xml:36(para)
msgid ""
"Shortcut keys are available for many of the menu options. All of the "
"shortcut keys are shown alongside the corresponding menu items. A useful "
"reference to the shortcut keys which are not directly attachted with the "
"menu is also available in the next section. Some useful shortcuts are listed "
"here."
msgstr ""
"Las teclas rápidas, o aceleradores de teclado, están disponibles para muchas "
"de las opciones de los menús. Todas las teclas rápidas se muestran junto con "
"los elementos del menú correspondientes. También hay una referencia útil "
"acerca de las teclas rápidas que no están directamente adjuntas a los menús "
"en la siguiente sección. A continuación se listan algunas teclas rápidas "
"útiles."

#: C/anjuta-manual.xml:46(para)
msgid ""
"<emphasis>Switch Editor page:</emphasis> CTRL-TAB (forward) and CTRL-SHIFT-"
"TAB (backward) -- The pages could also be switched by right clicking on the "
"notebook tabs and selecting an editor tab (useful when all the tabs in the "
"editor are not visible at once). Some desktop configuration may already have "
"these shortcut keys assigned. In that case, you will need to reconfigure "
"them (not in anjuta, because they are fixed) if you want to avail these "
"shortcuts."
msgstr ""

#: C/anjuta-manual.xml:55(para)
msgid ""
"<emphasis>Context Help:</emphasis> SHIFT-F1 -- Keep the cursor on the word "
"(for example, the function name) for which you want to get the API help and "
"press the shortcut. Context help only works if you have "
"<application>DevHelp</application> installed. If you do not have "
"<application>DevHelp</application> installed, the context help menu and "
"toolbar button will be inactive. You can get it from <application>DevHelp</"
"application> website. You will also have to install the related "
"<application>DevHelp</application> books."
msgstr ""
"<emphasis>Ayuda contextual:</emphasis> Mayús+F1; mantenga el cursor sobre "
"una palabra (por ejemplo, el nombre de la función) para la que quiere "
"obtener la ayuda de la API y pulse el atajo. La ayuda contextual sólo "
"funciona si tiene <emphasis>DevHelp</emphasis> instalado. Si no tiene "
"instalado <application>DevHelp</application>, el menú de ayuda contextual y "
"la barra de botones estarán inactivas. Puede obtenerlo de la página web de "
"<application>DevHelp</application>. También tendrá que instalar los libros "
"relacionados con<application>DevHelp</application>."

#: C/anjuta-manual.xml:65(para)
msgid ""
"<emphasis>Auto complete:</emphasis> CTRL-ENTER -- Press the shortcut with "
"the cursor placed at the end of incomplete word and a list of words matching "
"the remaining part will appear. Scroll and select the right word from the "
"list if you find one."
msgstr ""
"<emphasis>Autocompletar:</emphasis> Ctrl+Intro; pulse la combinación de "
"teclas con el cursor ubicado al final de una palabra incompleta y se "
"mostrará una lista de palabras que coincidan con la parte restante. Desplace "
"la lista y seleccione la palabra correcta de la lista, si encuentra una."

#: C/anjuta-manual.xml:72(para)
msgid ""
"<emphasis>More shortcus:</emphasis> Look for the shortcut keys displayed on "
"right side of the menu item labels. They could also be changed as explained "
"in the tip below."
msgstr ""
"<emphasis>Más teclas rápidas:</emphasis> Consulte las teclas rápidas "
"mostradas en la parte derecha de las etiquetas de los elementos del menú. "
"También se pueden cambiar como se explica en el siguiente consejo."

#: C/anjuta-manual.xml:79(title)
msgid "Customize shortcuts"
msgstr "Personalizar los atajos de teclado"

#: C/anjuta-manual.xml:80(para)
msgid ""
"You can change the default shortcuts by using <menuchoice><guisubmenu>Edit</"
"guisubmenu><guimenuitem>Preferences</guimenuitem></menuchoice> and selecting "
"the <interface> Shortcuts</interface> tab."
msgstr ""
"Puede cambiar las combinaciones de teclas predeterminadas usando "
"<menuchoice><guisubmenu>Editar</guisubmenu><guimenuitem>Preferencias</"
"guimenuitem></menuchoice> y seleccionando la solapa <interface>Combinaciones "
"de teclas</interface>."

#: C/anjuta-manual.xml:91(title)
msgid "Main Window"
msgstr "Ventana principal"

#: C/anjuta-manual.xml:92(para)
msgid ""
"In the main window, there are several views which can be reordered by "
"dragging on their title bars. They can also be minimized by clicking on the "
"minimize buttons on the left of title bars."
msgstr ""
"En la ventana principal hay varias vistas que se pueden reordenar soltando "
"sus barras de título. También se pueden minimizar pulsando en los botones de "
"minimizar en la parte izquierda de las barras de título."

#: C/anjuta-manual.xml:101(para)
msgid ""
"The <interface>Documents window</interface> will have one document active at "
"a time (if there are any files opened). All of the file commands will apply "
"to this active document. You can switch to any page by clicking on the page "
"tab. You can do the same by right-clicking on the page tabs and choosing the "
"document from the pop-up menu that will appear. This is especially useful "
"when you have a lot of files opened, but not all of them are visible in the "
"page tab area."
msgstr ""
"La <interface>ventana de documentos</interface> tendrá un documento activo "
"cada vez (si hay algún archivo abierto). Todos los comandos del archivo se "
"aplican en este documento. Puede cambiar a cualquier página pulsando en la "
"solapa de la página. Puede hacer lo mismo pulsando con el botón derecho del "
"ratón en las solapas de la página y escogiendo el documento del menú "
"emergente que aparecerá. Esto es especialmente útil cuando tiene muchos "
"archivos abiertos pero no todos son visibles en el área de las solapas de la "
"página."

#: C/anjuta-manual.xml:112(para)
msgid ""
"The <interface>Project window</interface> shows a tree of the project files "
"if you have a project opened. Otherwise, the <interface>Project window</"
"interface> is usually hidden. Double-clicking on any item in the "
"<interface>Project window</interface> will open that file."
msgstr ""
"La <interface>ventana de proyecto</interface> muestra un árbol con los "
"archivos del proyecto si tiene un proyecto abierto. De otra forma, la "
"<interface>Ventana de proyecto</interface> generalmente está oculta. Pulsar "
"dos veces sobre cualquier elemento en la <interface>Ventana de proyecto</"
"interface> abrirá ese archivo."

#: C/anjuta-manual.xml:120(para)
msgid ""
"The <interface>Files window</interface> shows a file tree. If no project is "
"open, the file tree usually points to the file system root but you can "
"change it in the preferences. If a project is open it shows all files inside "
"the project. Double clicking opens a file in the appropriate application as "
"configured in the gnome mime preferences. Richt click opens a popup-menu "
"which gives you choices how to open the file."
msgstr ""
"La <interface>ventana de archivos</interface> muestra un árbol de archivos. "
"Si no hay un proyecto abierto, el árbol de archivos apunta al sistema de "
"archivos raíz, pero puede cambiarlo en las preferencias. Si un proyecto está "
"abierto muestra todos los archivos dentro del proyecto. Pulsar dos veces "
"abre un archivo en la aplicación apropiada según esté configurado en las "
"preferencias MIME de GNOME. Pulsar con el botón derecho abre un menú "
"emergente que le proporciona opciones sobre cómo abrir el archivo."

#: C/anjuta-manual.xml:129(para)
msgid ""
"The <interface>Symbols window</interface> shows shows a tree of availible "
"symbols in the project generated from ctags parser. Double clicking opens an "
"editor window with the corresponding file and line."
msgstr ""
"La <interface>ventana de símbolos</interface> muestra un árbol con los "
"símbolos disponibles en el proyecto generados desde el analizador ctags. Al "
"pulsar dos veces se abre una ventana del editor con el archivo y líneas "
"correspondientes."

#: C/anjuta-manual.xml:134(para)
msgid ""
"There is also a <interface>Search tab</interface> in the Symbols window "
"where you can search for symbols."
msgstr ""
"También existe una <interface>Barra de búsqueda</interface> en la ventana "
"Símbolos en la que puede buscar símbolos."

#: C/anjuta-manual.xml:140(para)
msgid ""
"The <interface>Message window</interface> will list all the messages (both "
"<filename>stdout</filename> and <filename>stderr</filename> outputs) when an "
"external command is executed. The <interface>Message window</interface> is "
"usually hidden, but appears as soon as an external command is executed, such "
"as during file or project compilation, debugging sessions, searches, and "
"many other operations. <application>Anjuta</application> also adds its own "
"messages here when necessary."
msgstr ""
"La <interface>ventana de mensajes<interface> listará todos los mensajes "
"(salidas tanto <filename>stdout</filename> como <filename>stderr</filename>) "
"cuando se ejecute un comando externo. La <interface>ventana de "
"mensajes<interface> generalmente está oculta, pero aparece tan pronto como "
"se ejecuta un comando externo, ya sea durante la compilación del archivo o "
"proyecto, las sesiones de depuración, las búsquedas o muchas otras "
"operaciones. <application>Anjuta</application> también añade suspropios "
"mensajes cuando es necesario."

#: C/anjuta-manual.xml:148(para)
msgid ""
"The colors used to display the messages are important. Messages displayed in "
"the standard foreground color (usually Black) are normal messages. Those "
"displayed in Blue are important messages such as errors or other "
"information. Messages shown in Red are <emphasis>Hot Linked</emphasis>. "
"Double-clicking on such a message will take you to the particular file and "
"line number specified in the message."
msgstr ""
"Los colores que se usan para mostrar los mensajes son importantes. Los "
"mensajes mostrados en el color de fondo estándar (generalmente negro) son "
"mensajes normales. Los que se muestran en azul son mensajes importantes, "
"como mensajes de error u otra información. Los mensajes mostrados en rojo "
"están <emphasis>enlazados</emphasis>. Al pulsar dos veces sobre esos "
"mensajes irá a archivo y número de línea particulares especificados en el "
"mensaje."

#: C/anjuta-manual.xml:156(para)
msgid ""
"For example, when you compile a file which contains bugs, some red messages "
"will appear showing what the problems are, and where they occur. Double-"
"clicking on such messages will open the file and highlight the line "
"containing the error."
msgstr ""
"Por ejemplo, cuando compila un archivo que contiene errores aparecerán "
"algunos mensajes en rojo mostrando los problemas y dónde ocurren. Al pulsar "
"dos veces sobre dichos mensajes se abrirá el archivo y se resaltará la línea "
"que contiene el error."

#: C/anjuta-manual.xml:164(para)
msgid ""
"The <interface>Terminal window</interface> is a terminal emulation where you "
"can type commands just like in the gnome-terminal."
msgstr ""
"La <interface>Ventana del terminal</interface> es una emulación de un "
"terminal donde puede ejecutar comandos igual que en gnome-terminal."

#: C/anjuta-manual.xml:172(title)
msgid "Session management"
msgstr "Gestión de sesiones"

#: C/anjuta-manual.xml:173(para)
msgid ""
"All of the settings, including the window sizes and window positions, are "
"saved when you exit <application>Anjuta</application>. Session management is "
"still under development, so you should not exit <application>Anjuta</"
"application> with any unsaved documents. <application>Anjuta</application> "
"will display a warning if you try to exit with unsaved documents still open."
msgstr ""
"Todos los ajustes, incluyendo los tamaños y posiciones de las ventanas, se "
"guardan al salir de <application>Anjuta</application>. La gestión de las "
"sesiones aún está bajo desarrollo, así que no debería salir de "
"<application>Anjuta</application> sin haber guardado antes sus documentos. "
"<application>Anjuta</application> mostrará una advertencia si intenta salir "
"con documentos sin guardar abiertos."

#: C/anjuta-manual.xml:2(title)
msgid "File Operations"
msgstr "Operaciones con archivos"

#: C/anjuta-manual.xml:6(title)
msgid "Creating a New File and inserting texts"
msgstr "Crear un archivo nuevo e insertar texto"

#: C/anjuta-manual.xml:8(title)
msgid "Creating New File"
msgstr "Crear un archivo nuevo"

#: C/anjuta-manual.xml:9(para)
msgid ""
"To create a new file, choose <menuchoice><guisubmenu>File</"
"guisubmenu><guimenuitem>New</guimenuitem></menuchoice> from the menubar, or "
"click on the <guibutton>New File</guibutton> button on the toolbar. A new "
"page will appear in the editor (or a new window if the parent document is "
"windowed). This new document will be named <filename>newfile#1</filename>, "
"<filename>newfile#2</filename>, <filename>newfile#3</filename> and so on."
msgstr ""
"Para crear un archivo nuevo, elija <menuchoice><guisubmenu>Archivo</"
"guisubmenu><guimenuitem>Nuevo</guimenuitem></menuchoice> de la barra de menú "
"o pulse el botón <guibutton>Archivo nuevo</guibutton> en la barra de "
"herramientas. Se abrirá una nueva página en el editor (o una nueva ventana "
"si el documento padre está en una ventana). Este nuevo documento se llamará "
"<filename>newfile#1</filename>, <filename>newfile#2</filename>, "
"<filename>newfile#3</filename> y demás."

#: C/anjuta-manual.xml:19(title)
msgid "Save file"
msgstr "Guardar archivo"

#: C/anjuta-manual.xml:20(para)
msgid ""
"You should save new documents as soon as possible to avoid any data loss in "
"case of a crash."
msgstr ""
"Debería guardar sus documentos nuevos tan pronto como le sea posible para "
"evitar cualquier pérdida de datos en caso de cuelgue."

#: C/anjuta-manual.xml:27(title)
msgid "File Wizard"
msgstr "Asistente de archivos"

#: C/anjuta-manual.xml:38(title)
msgid "New File Wizard"
msgstr "Nuevo asistente de archivos"

#: C/anjuta-manual.xml:40(screeninfo) C/anjuta-manual.xml:153(screeninfo)
msgid "The Open File dialog"
msgstr "El diálogo Abrir archivo"

#: C/anjuta-manual.xml:28(para)
msgid ""
"A wizard can also be used to create a new file.To create a new file, choose "
"<menuchoice><guisubmenu>File</guisubmenu><guisubmenu>New</"
"guisubmenu><guimenuitem>File</guimenuitem></menuchoice> from the menubar. "
"This will open the New File Wizard dialog. Select the file type. Enter the "
"File name. The suffix will be automatically added. You can add a license "
"information (according to your license choice) and a header. In case of C-C+"
"+ header file, you can also add an header template. Click <guibutton>OK</"
"guibutton> to validate the creation. <placeholder-1/>"
msgstr ""
"También se puede usar un asistente para crear un archivo nuevo. Para crear "
"un archivo nuevo, elija <menuchoice><guisubmenu>Archivo</"
"guisubmenu><guisubmenu>Nuevo</guisubmenu><guimenuitem>Archivo</guimenuitem></"
"menuchoice> de la barra de menú. Esto abrirá el diálogo Archivo nuevo. "
"Seleccione el tipo de archivo. Introduzca el nombre del archivo. El sufijo "
"se añadirá automáticamente. Puede añadir información sobre la licencia (de "
"acuerdo con la licencia a su elección) y una cabecera. En caso de que sea "
"una cabecera C o C++, también puede añadir una plantilla de cabecera. Pulse "
"<guibutton>Aceptar</guibutton> para validar la creación. <placeholder-1/>"

#: C/anjuta-manual.xml:45(para)
msgid ""
"<application>Anjuta</application> occatinally also creates new files during "
"some operations. For example, some CVS operations, such as diff, file log, "
"file status etc, create new files and add the output there. These could be "
"saved in real file just like normal new files."
msgstr ""
"<application>Anjuta</application> ocasionalmente crea nuevos archivos "
"durante algunas operaciones. Por ejemplo, algunas operaciones sobre CVS, "
"tales como diff, log de un archivo, status de un archivo, etc, crean "
"archivos nuevos y añaden la salida allí. Estos se pueden guardar en un "
"archivo real igual que los nuevos archivos normales."

#: C/anjuta-manual.xml:53(title)
msgid "Inserting Macros"
msgstr "Insertar macros"

#: C/anjuta-manual.xml:54(para)
msgid "Macros can be used to quickly edit repetitive sequences of text."
msgstr ""
"Se pueden usar macros para editar rápidamente secuencias repetitivas de "
"texto."

#: C/anjuta-manual.xml:58(para)
msgid "Macro plugin must be activated."
msgstr "El complemento de macros debe estar activado."

#: C/anjuta-manual.xml:63(title)
msgid "Inserting"
msgstr "Insertar"

#: C/anjuta-manual.xml:64(para)
msgid ""
"Two types of macros are available: Anjuta macros and User macros (My "
"macros). Anjuta macros are not modifiable by the user. On the other hand, "
"User macros can be defined and modified by the user."
msgstr ""
"Existen dos tipos de macros disponibles: Los macros de Anjuta y los macros "
"del usuario (Mis macros). Los macros de Anjuta no son modificables por el "
"usuario. Por otra parte, los macros del usuario se pueden definir y "
"modificar por el usuario."

#: C/anjuta-manual.xml:69(para)
msgid ""
"To insert macro, move the cursor at the desired place. Select "
"<menuchoice><guisubmenu>Edit</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Macros...</guimenuitem></menuchoice>. The dialog "
"window appears. Select the wanted macro in the list. The result of the macro "
"expansion is displayed in the window and a summary is shown in the dialog "
"window. Choose <guibutton>Insert</guibutton>. The expanded macro text is "
"inserted at the cursor position."
msgstr ""
"Para insertar una macro, mueva el cursor al lugar deseado. Seleccione "
"<menuchoice><guisubmenu>Editar</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Macros...</guimenuitem></menuchoice>. Aparecerá la "
"ventana de diálogo. Seleccione la macro deseada de la lista. El resultado de "
"la expansión de la macro se mostrará en la ventana así como un resumen en la "
"ventana de diálogo. Elija <guibutton>Insertar</guibutton>. Se insertará el "
"texto de la macro expandida en la posición del cursor."

#: C/anjuta-manual.xml:82(title)
msgid "Macro"
msgstr "Macro"

#: C/anjuta-manual.xml:84(screeninfo)
msgid "The Macro dialog"
msgstr "El diálogo Macro"

#: C/anjuta-manual.xml:77(para)
msgid ""
"Another possibility to insert macro is to select "
"<menuchoice><guisubmenu>Edit</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Insert Macro...</guimenuitem></menuchoice>, then to "
"press the wanted macro shortcut. <placeholder-1/>"
msgstr ""
"Otra posibilidad para insertar un macro es seleecionar "
"<menuchoice><guisubmenu>Editar</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Insertar macro…</guimenuitem></menuchoice>, después "
"pulsar el atajo de teclado sobre el macro seleccionado. <placeholder-1/>"

#: C/anjuta-manual.xml:91(title)
msgid "Defining Macros"
msgstr "Definir macros"

#: C/anjuta-manual.xml:92(para)
msgid ""
"From the Insert-Macro window, choose <guibutton>Add</guibutton> or select "
"<menuchoice><guisubmenu>Edit</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Add Macro... </guimenuitem></menuchoice>. The Add/"
"Edit window appears. Enter the macro name, choose or define a category and "
"enter a shortcut. Then edit text relative to your macro. The character ' | ' "
"will indicate the cursor position after the macro insertion. Choose "
"<guibutton>OK</guibutton>. The macro is added to the list."
msgstr ""
"Desde la ventana de Insertar macro, elija <guibutton>Añadir</guibutton> o "
"seleccione <menuchoice><guisubmenu>Editar</guisubmenu><guisubmenu>Macros</"
"guisubmenu><guimenuitem>Añadir macro...</guimenuitem></menuchoice>. "
"Aparecerá la ventana de Añadir/editar. Introduzca el nombre de la macro, "
"elija o defina una categoría e introduzca un atajo. Después edite el texto "
"relativo a la macro. El carácter «|» indicará la posición del cursor después "
"de la inserción de la macro. Elija <guibutton>Aceptar</guibutton>. La macro "
"se añadirá a la lista."

#: C/anjuta-manual.xml:100(para)
msgid ""
"The user can also erase a macro by selecting it in the list (only My Macros) "
"then by choosing <guibutton>Remove</guibutton>."
msgstr ""
"El usuario también puede borrar un macro seleccionándolo en la lista (sólo "
"Mis macros) y después eligiendo <guibutton>Eliminar</guibutton>."

#: C/anjuta-manual.xml:108(title)
msgid "Add/Edit Macro"
msgstr "Añadir/Editar macro"

#: C/anjuta-manual.xml:110(screeninfo)
msgid "Add Edit dialog"
msgstr "Diálogo Añadir/Editar"

#: C/anjuta-manual.xml:104(para)
msgid ""
"Same manner, macro can be edited and modified by selecting it in the list "
"then by choosing <guibutton>Edit</guibutton>. <placeholder-1/>"
msgstr ""
"De la misma manera se puede editar un macro y modificarlo seleccionándolo en "
"la lista y después eligiendo <guibutton>Editar</guibutton>. <placeholder-1/>"

#: C/anjuta-manual.xml:117(title)
msgid "Macro Keywords"
msgstr "Palabras clave de los macros"

#: C/anjuta-manual.xml:118(para)
msgid ""
"Macros Keywords are available. They can be integrated in the macro "
"definitions. The names of these macro Keywords start and finish by the "
"character ' @ '."
msgstr ""
"Están disponibles las palabras clave para los macros. Pueden integrarse en "
"la definición del macro. Los nombres de estas palabras clave de los macros "
"comienzan y finalizan con el carácter «@»."

#: C/anjuta-manual.xml:126(title)
msgid "Keyword Macro"
msgstr "Palabra clave del macro"

#: C/anjuta-manual.xml:128(screeninfo)
msgid "The Keyword macro"
msgstr "La palabra clave del macro"

#: C/anjuta-manual.xml:122(para)
msgid ""
"Available macro keywords are : @DATE_TIME@, @DATE_YMD@, @DATE_Y@, "
"@USER_NAME@, @FILE_NAME@, @FILE_NAME_UP@, @FILE_NAME_UP_PREFIX@, @EMAIL@, "
"@TABSIZE@, @INDENTSIZE@, @USETABS@. <placeholder-1/>"
msgstr ""
"Las palabras clave de macro disponibles son: @DATE_TIME@, @DATE_YMD@, "
"@DATE_Y@, @USER_NAME@, @FILE_NAME@, @FILE_NAME_UP@, @FILE_NAME_UP_PREFIX@, "
"@EMAIL@, @TABSIZE@, @INDENTSIZE@, @USETABS@. <placeholder-1/>"

#: C/anjuta-manual.xml:139(title)
msgid "Opening and Saving Files"
msgstr "Abrir y guardar archivos"

#: C/anjuta-manual.xml:151(title)
msgid "Open File dialog"
msgstr "Diálogo Abrir archivo"

#: C/anjuta-manual.xml:143(para)
msgid ""
"<emphasis>Opening a file:</emphasis> To open an existing file, choose "
"<menuchoice><guisubmenu>File</guisubmenu><guimenuitem>Open</guimenuitem></"
"menuchoice> from the menubar, click on the <guibutton>Open</guibutton> "
"button on the toolbar, or press <keycombo><keycap>Ctrl</keycap><keycap>O</"
"keycap></keycombo>. This will display the <interface>Open File</interface> "
"dialog. <placeholder-1/> Select or enter the file you want to open, then "
"click <guibutton>Open</guibutton>. To open more than one file at once, "
"select multiple files to open by first pressing CTRL and clicking the files "
"in the list and press <guibutton>Open</guibutton>. If you change your mind, "
"click <guibutton>Cancel</guibutton> to dismiss the dialog without opening "
"the file."
msgstr ""

#: C/anjuta-manual.xml:172(title)
msgid "Open Multiple File dialog"
msgstr "Diálogo Abrir múltiples archivos"

#: C/anjuta-manual.xml:174(screeninfo)
msgid "The Open File dialog in multiple-select mode"
msgstr "El diálogo Abrir archivo en el modo de múltiple selección"

#: C/anjuta-manual.xml:164(para)
msgid ""
"For selecting multiple files at once, select a file in the dialog and press "
"CTRL once. This will bring the file selection dialog in multiple-select mode "
"and multiple files could be selected from the list. Multiple file select "
"mode is simlar to single file select mode, except that the file operation "
"(for which the file selection was being done) will be performed for all the "
"selected files. <placeholder-1/>"
msgstr ""
"Para seleccionar múltiples archivos a la vez, seleccione un archivo en el "
"diálogo y pulse Ctrl una vez. Esto cambiará el diálogo de selección al modo "
"de selección múltiple y se podrán seleccionar varios archivos de la lista. "
"El modo de selección múltiple de archivos es similar al modo de selección "
"única, excepto que la operación sobre archivos (para la que se está "
"realizando la selección de archivos) se realizará sobre todos los archivos "
"seleccionados. <placeholder-1/>"

#: C/anjuta-manual.xml:179(para)
msgid ""
"The <emphasis>Show Hidden</emphasis>, if switched on (Click right), will "
"make the hidden files (files starting with \".\"; visible in the file list. "
"Depress it to make them hide. <application>Anjuta</application> "
"fileselection dialog also has inbuild file type filter. Select the "
"appropiate file type filter in the dialog and the file list will be limited "
"to the files of the selected type only."
msgstr ""

#: C/anjuta-manual.xml:199(screeninfo)
msgid "The Save As File"
msgstr "Guardar como archivo"

#: C/anjuta-manual.xml:189(para)
msgid ""
"<emphasis>Saving a file:</emphasis> To save a file, choose "
"<menuchoice><guisubmenu>File</guisubmenu><guimenuitem>Save</guimenuitem></"
"menuchoice> from the menubar, click on the <guibutton>Save</guibutton> "
"button on the toolbar, or press <keycombo><keycap>Ctrl</keycap><keycap>S</"
"keycap></keycombo>. This will save the file. If the file is new, a "
"<interface>Save As</interface> dialog will appear. Enter a filename and "
"click <guibutton>Save</guibutton> to save the new file with the name "
"supplied. <placeholder-1/>"
msgstr ""
"<emphasis>Guardar un archivo:</emphasis>. Para guardar un archivo elija "
"<menuchoice><guisubmenu>Archivo</guisubmenu><guimenuitem>Guardar</"
"guimenuitem></menuchoice> de la barra de menú, pulse el botón "
"<guibutton>Guardar</guibutton> en la barra de herramientas, o pulse "
"<keycombo><keycap>Ctrl</keycap><keycap>S</keycap></keycombo>. Esto guardará "
"el archivo. Si el archivo es nuevo aparecerá un diálogo <interface>Guardar "
"como</interface>. Introduzca un nombre de archivo y pulse "
"<guibutton>Guardar</guibutton> para guardar el archivo nuevo con el nombre "
"proporcionado. <placeholder-1/>"

#: C/anjuta-manual.xml:204(title)
msgid "File auto save"
msgstr "Autoguardar archivos"

#: C/anjuta-manual.xml:205(para)
msgid ""
"If you have enabled auto-save, it will not auto-save any new files. You must "
"first save them manually. The same applies to the <guimenuitem>Save All</"
"guimenuitem> option: it will not save new files, if you haven't saved them "
"first manually. <emphasis>You must save a file manually before auto-save or "
"<guimenuitem>Save All</guimenuitem> will work with it.</emphasis>"
msgstr ""
"Si ha habilitado el autoguardado, no guardará ningún archivo nuevo. Primero "
"debe guardarlos manualmente. Lo mismo se aplica a la opción "
"<guimenuitem>Guardar todos</guimenuitem>: no guardará ningún archivo nuevo "
"si no los ha guardado antes manualmente. <emphasis>Debe guardar un archivo "
"manualmente para que el autoguardado o <guimenuitem>Guardar todos</"
"guimenuitem> funcionen con ellos.</emphasis>"

#: C/anjuta-manual.xml:216(para)
msgid ""
"<emphasis>Saving a file with a different name:</emphasis> You can explicitly "
"save a file with a new filename. To do this, choose "
"<menuchoice><guisubmenu>File</guisubmenu><guimenuitem>Save As</guimenuitem></"
"menuchoice> from the menubar. A <interface>Save As</interface> dialog will "
"appear prompting you to enter the new filename. Enter the name and click "
"<guibutton>Save</guibutton>."
msgstr ""
"<emphasis>Guardar un archivo con un nombre diferente:</emphasis> Puede "
"guardar un archivo con un nombre nuevo explícitamente. Para hacerlo, elija "
"<menuchoice><guisubmenu>Archivo</guisubmenu><guimenuitem>Guardar como</"
"guimenuitem></menuchoice> de la barra de menú. Aparecerá un diálogo "
"<interface>Guardar como</interface> preguntándole por el nombre de archivo "
"nuevo. Introduzca el nombre y pulse <guibutton>Guardar</guibutton>."

#: C/anjuta-manual.xml:224(title)
msgid "File save as overwrite"
msgstr "Sobreescribir archivo al guardar"

#: C/anjuta-manual.xml:225(para)
msgid ""
"When you use <guimenuitem>Save As</guimenuitem> with an existing file, the "
"original is not deleted. It is left unchanged since the last save. If a file "
"with the new filename already exists, a confirmation dialog will appear, to "
"ensure that you want to overwrite it. Clicking <guibutton>Yes</guibutton> "
"will overwrite the file with the file you are saving."
msgstr ""
"Cuando use <guimenuitem>Guardar como</guimenuitem> sobre un archivo ya "
"existente, el original no se borra. Se deja sin cambiar desde la última vez "
"que se guardó. Si un archivo con el nombre de archivo nuevo ya existe, "
"aparecerá un diálogo de confirmación, para asegurar que quiere "
"sobreescribirlo. Pulsar <guibutton>Sí</guibutton> sobreescribirá el archivo "
"con el archivo que está guardando."

#: C/anjuta-manual.xml:237(para)
msgid ""
"<emphasis>Closing a file:</emphasis> To close a file, choose "
"<menuchoice><guisubmenu>File</guisubmenu><guimenuitem>Close</guimenuitem></"
"menuchoice> from the menubar, or click on the <guibutton>Close</guibutton> "
"button on the toolbar. The file could also be closed by clicking the "
"<guibutton>cross</guibutton> in the filename tab. This will close the "
"current file. If the file is not saved, or is a new file, then "
"<application>Anjuta</application> will prompt you to save the file before "
"closing it."
msgstr ""
"<emphasis>Cerrar un archivo:</emphasis> para cerrar un archivo, elija "
"<menuchoice><guisubmenu>Archivo</guisubmenu><guimenuitem>Cerrar</"
"guimenuitem></menuchoice> de la barra de menú, o pulse el botón "
"<guibutton>Cerrar</guibutton> de la barra de herramientas. El archivo "
"también se puede cerrar pulsando sobre la <guibutton>cruz</guibutton> en la "
"solapa del nombre del archivo. Esto cerrará el archivo actual. Si el archivo "
"no está guardado o es un archivo nuevo, entonces <application>Anjuta</"
"application> le preguntará si quiere salvar el archivo antes de cerrarlo."

#: C/anjuta-manual.xml:254(title)
msgid "Editing Files"
msgstr "Editar archivos"

#: C/anjuta-manual.xml:255(para)
msgid ""
"<application>Anjuta</application> has a number of helpful features which aid "
"in editing and working with source files. The following sections describe "
"how to use some of the interesting features available."
msgstr ""
"<application>Anjuta</application> posee cierto número de características de "
"ayuda para la edición y el trabajo con archivos de código fuente. Las "
"siguientes secciones describen cómo usar algunas de las interesantes "
"características disponibles."

#: C/anjuta-manual.xml:261(title) C/anjuta-manual.xml:270(title)
msgid "Editor Margins"
msgstr "Márgenes del editor"

#: C/anjuta-manual.xml:272(screeninfo) C/anjuta-manual.xml:320(screeninfo)
#: C/anjuta-manual.xml:415(screeninfo)
msgid "The Tags toolbar"
msgstr "La barra de herramientas de etiquetas"

#: C/anjuta-manual.xml:262(para)
msgid ""
"<emphasis>Editor Margins:</emphasis> Editor margins are the small area on "
"the left of the editor for some special purposes. There are three editor "
"margins available and all of them may not be available when you first start "
"<application>anjuta</application>. They are Line numbers margin, Markers "
"margin and Code fold margin. By default (that is, when you run "
"<application>anjuta</application> for the first time) only the code fold "
"margin witll be visible. The rest could be made visible from "
"<menuchoice><guimenu>View</guimenu><guisubmenu>Editor</guisubmenu></"
"menuchoice>. <placeholder-1/>"
msgstr ""
"<emphasis>Márgenes del editor:</emphasis> los márgenes del editor son las "
"pequeñas áreas en la parte izquierda del editor que sirven para algunos "
"propósitos especiales. Existen tres márgenes de editor disponibles y puede "
"que no todos estén disponibles al iniciar <application>Anjuta</application>. "
"Son el Margen del número de línea, el Margen de marcadores y el Margen de "
"plegado del código. De forma predeterminada (esto es, cuando inicia "
"<application>Anjuta</application> por primera vez) sólo el margen de plegado "
"del código será visible. El resto se puede hacer visible desde el menú "
"<menuchoice><guimenu>Ver</guimenu><guisubmenu>Editor</guisubmenu></"
"menuchoice>. <placeholder-1/>"

#: C/anjuta-manual.xml:277(para)
msgid ""
"The <emphasis>Line Numbers Margin</emphasis> is largest of all the three "
"margins (and slightly darker then rest) and displays the document's line "
"numbers. <emphasis>Line Number Margin</emphasis> could be made visible or "
"invisible by toggling <menuchoice><guimenu>View</guimenu><guisubmenu>Editor</"
"guisubmenu><guimenuitem>Line Numbers Margin</guimenuitem></menuchoice>. "
"Single left clicking on this margin will select the whole line (including "
"the last newline, if present). You can set the font properties for line "
"number margin in the preferences."
msgstr ""
"El <emphasis>Margen de números de línea</emphasis> es el más grande de los "
"tres márgenes (y ligeramente más oscuro que el resto) y muestra los números "
"de línea del documento. El <emphasis>Margen de números de línea</emphasis> "
"puede hacerse visible o invisible conmutando <menuchoice><guimenu>Ver</"
"guimenu><guisubmenu>Editor</guisubmenu><guimenuitem>Margen de números de "
"línea</guimenuitem></menuchoice>. Una simple pulsación en este margen "
"seleccionará la línea entera (incluyendo. si está presente, la última línea "
"nueva). Puede establecer las propiedades de la tipografía para el margen de "
"los números de línea en las preferencias."

#: C/anjuta-manual.xml:286(para)
msgid ""
"<emphasis>Markers Margin</emphasis> is the next margin which can be made "
"visible or invisible by selecting <menuchoice><guimenu>View</"
"guimenu><guisubmenu>Editor</guisubmenu><guimenuitem>Markers Margin</"
"guimenuitem></menuchoice>. This margin displays graphical icons to mark the "
"given line. The markers which will be displayed in this margin are Bookmark "
"marker (rectangular blue colored icon), Breakpoint marker (circular red "
"colored) and Line indicator (pointed arrow yellow colored). Bookmark marker "
"is used to indicate bookmaked lines which could be toggled from "
"<menuchoice><guimenu>Goto</guimenu><guisubmenu>Bookmark</"
"guisubmenu><guimenuitem> Toggle Bookmark</guimenuitem></menuchoice> with the "
"cursor placed in that line. The breakpoint marker is used in debugger to "
"mark the line with debugging breakpoints (see debugging section for more "
"details). The line indicator marker is used to indicate a line when we do a "
"jump from another part, for example when navigating the bookmarks and during "
"single stepping in debugger."
msgstr ""
"El <emphasis>Margen de marcadores<emphasis> es el siguiente margen que se "
"puede hacer visible o invisible seleccionando </"
"emphasis><menuchoice>Ver<guimenu></guimenu>Editor<guisubmenu></"
"guisubmenu>Margen de marcadores<guimenuitem></guimenuitem></menuchoice>. "
"Este margen muestra iconos gráficos para marcar la línea dada. Los "
"marcadores que se mostrarán en éste margen son los Marcadores (icono "
"rectangular azul), los Puntos de parada (círculo rojo) y los Indicadores de "
"línea (flecha amarilla). Los Marcadores se usan para indicar líneas marcadas "
"que se pueden cambiar desde <menuchoice><guimenu>Ir a</"
"guimenu><guisubmenu>Marcador</guisubmenu><guimenuitem>Cambiar marcador</"
"guimenuitem></menuchoice> con el cursor sobre esa línea. Los marcadores de "
"puntos de parada se usan en la depuración para marcar la línea con puntos de "
"para de la depuración (vea la sección de depuración para obtener más "
"detalles). Los marcadores de indicadores se usan para indicar una línea "
"cuando se salta de una parte a otra, por ejemplo, cuando se navega entre los "
"marcadores y durante la depuración paso a paso."

#: C/anjuta-manual.xml:299(para)
msgid ""
"<emphasis>Code folding margin</emphasis> is where the folding tree is "
"visisble. Clicking on these folding tree nodes will fold or unfold the code "
"blocks. An underline will also be drawn below the folded line to make it "
"more obvious that a block of code has been folded below the line. For more "
"details on code folding, see the section <emphasis>Code Folding</emphasis> "
"below."
msgstr ""

#: C/anjuta-manual.xml:307(title)
msgid "Invisible margin marker"
msgstr "Marcador de márgenes invisibles"

#: C/anjuta-manual.xml:318(title)
msgid "Editor markes when markers margin is invisible"
msgstr "El editor marca cuando el margen del marcador es invisible"

#: C/anjuta-manual.xml:308(para)
msgid ""
"If the marker margin is not visible, the markers will be displayed by "
"changing the background color of the line. For example, if there a "
"breakpoint marker is set in a line and the marker margin is not visible, "
"that line will be displayed with red background. Similarly, for bookmark "
"marker and line indicatior marker, the background color of the line will be "
"sky blue and yellow, respectively. If you do not like this (perhaps due to "
"some contrasting themes), enable the <emphasis>Markers Margins</emphasis> "
"from <menuchoice><guimenu>View</guimenu><guisubmenu>Editor</"
"guisubmenu><guimenuitem>Markers Margin</guimenuitem></menuchoice>. "
"<placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:328(title)
msgid "Editor Guides"
msgstr "Guías del editor"

#: C/anjuta-manual.xml:329(para)
msgid ""
"The editor could be made to make certain document information, which "
"otherwise are normally not visible. <emphasis>Indentation guides, white "
"spaces and line end characters</emphasis> are such information which could "
"be made visible for editing comfort. They could be make visible or invisible "
"by toggling the menu items in <menuchoice><guimenu>View</"
"guimenu><guisubmenu>Editor</guisubmenu></menuchoice>. Indentation guides are "
"the small dotted lines drawn to connect the matching braces in the source "
"code. When the cursor is over one such maching braces, the dotted "
"indentation guide is highlighted to give a visual region of the indentation."
msgstr ""

#: C/anjuta-manual.xml:339(title) C/anjuta-manual.xml:341(screeninfo)
msgid "Editor with guides"
msgstr "Editor con guías"

#: C/anjuta-manual.xml:347(title)
msgid "Syntax highlighting"
msgstr "Resaltado de sintaxis"

#: C/anjuta-manual.xml:348(para)
msgid ""
"<application>Anjuta</application> can highlight many different languages. "
"This is usually done automatically by determining the type of the file from "
"the file extension. If <application>Anjuta</application> cannot determine "
"the type of the file, there will be no syntax highlighting. You can "
"explicitly force a particular highlight style by selecting the style from "
"the menu <menuchoice><guimenu>View</guimenu><guisubmenu>Editor</"
"guisubmenu><guisubmenu> Highlight Mode</guisubmenu></menuchoice>."
msgstr ""
"<application>Anjuta</application> puede resaltar muchos lenguajes "
"diferentes. Esto generalemente se hace automáticamente determinando el tipo "
"del archivo desde la extensión de archivo. Si <application>Anjuta</"
"application> no puede determinar el tipo del archivo, entonces no habrá "
"resaltado de sintaxis. Puede forzar un estilo de resaltado particular "
"seleccionándolo del menú <menuchoice><guimenu>Ver</"
"guimenu><guisubmenu>Editor</guisubmenu><guisubmenu>Modo de resaltado</"
"guisubmenu></menuchoice>."

#: C/anjuta-manual.xml:359(title)
msgid "Code folding"
msgstr "Plegado de código"

#: C/anjuta-manual.xml:360(para)
msgid ""
"Source files which have block coding properties (such as C, C++, Pascal, "
"Java etc.), have the advantage of working with <emphasis>code folds</"
"emphasis>. All of the code blocks in the source file can be folded or "
"unfolded by clicking on the fold points in the fold margin of the "
"<interface>Editor window</interface> (usually a +/- symbol or up/down "
"arrow). These fold points automatically appear for source files which use "
"code blocks."
msgstr ""
"Los archivos fuente que tienen un bloque de propiedades de código (tales "
"como C, C++, Pascal, Java, etc.) tienen la ventaja de trabajar con "
"<emphasis>plegados de código</emphasis>. Todos los bloques de código en el "
"archivo fuente se pueden plegar o desplegar pulsando en los puntos de "
"plegado en el margen de plegado de la <interface>ventana del editor</"
"interface> (generalmente un símbolo +/- o unas flechas arriba/abajo). Estos "
"puntos de plegado aparecen automáticamente para archivos fuente que usan "
"bloques de código."

#: C/anjuta-manual.xml:368(para)
msgid ""
"Code folding is especially useful when editing big source files that run to "
"thousands of lines. Once the folds are closed, the document appears to "
"become smaller, facilitating easy browsing and editing of the file."
msgstr ""
"El plegado de código es especialmente útil al editar archivos fuente grandes "
"que se extienden varios miles de líneas. Una vez que se cierran los "
"pliegues, el documento parece más pequeño, facilitando la examinación y el "
"editado del archivo."

#: C/anjuta-manual.xml:374(para)
msgid ""
"Please note that code folding and editor guides are only avalible in the "
"scintilla based editor."
msgstr ""
"Note que el plegado del código y las guías del editor sólo están disponibles "
"en el editor basado en Scintilla."

#: C/anjuta-manual.xml:381(title)
msgid "Auto-formatting source code"
msgstr "Autoformatear el código fuente"

#: C/anjuta-manual.xml:382(para)
msgid ""
"If the current file is a C or C++ source or header file, then it is possible "
"to automatically indent (auto-format) the file. This gives a clean look to "
"the source code, increases legibility, reduces the likelihood of syntax "
"errors, and above all it saves time. This can be performed by choosing "
"<menuchoice><guimenu>Edit</guimenu><guimenuitem>Auto Indent </guimenuitem></"
"menuchoice> on the menubar. Change the style of formatting by customizing "
"the choices in the preferences."
msgstr ""
"Si el archivo actual es un archivo fuente o de cabeceras de C o C++, "
"entonces es posible sangrarlo automáticamente (autoformatearlo). Proporciona "
"al código un aspecto limpio, aumentando su legibilidad, reduce la "
"probabilidad de errores de sintaxis y, por encima de todo, ahorra tiempo. "
"Esto se puede realizar eligiendo <menuchoice><guimenu>Editar</"
"guimenu><guimenuitem>Sangría automática</guimenuitem></menuchoice> en la "
"barra de menú. Cambie el estilo del formateo personalizando las opciones en "
"las preferencias."

#: C/anjuta-manual.xml:396(title)
msgid "Symbol browser and Browsing Files"
msgstr "Examinador de símbolos y Examinador de archivos"

#: C/anjuta-manual.xml:397(para)
msgid ""
"All C and C++ source and header files can be browsed using the tags in the "
"files. All of the open C and C++ source and header files are scanned for "
"available tags (a \"tag\" refers to a function definition, structure, macro, "
"etc.). Please note that Tag and Symbol is used synonymously in this manual, "
"except when refering to Tags browser and Symbol browser, which two different "
"interfaces."
msgstr ""
"Todos los archivos fuente y de cabeceras C y C++ se pueden examinar usando "
"las etiquetas en los archivos. Todos los archivos C y C++ fuente y de "
"cabeceras abiertos son analizados para sus etiquetas disponibles (una "
"«etiqueta» se refiere a una definición de función, estructura, macro, etc.). "
"Note que en este manual se usa «etiqueta» y «símbolo» como sinónimos, "
"excepto al referirse al Examinador de etiquetas y al Examinador de símbolos, "
"que tienen dos interfaces distintos."

#: C/anjuta-manual.xml:413(title) C/anjuta-manual.xml:436(title)
msgid "Tags toolbar"
msgstr "Barra de herramientas de etiquetas"

#: C/anjuta-manual.xml:419(title)
msgid "Function symbols"
msgstr "Símbolos de funciones"

#: C/anjuta-manual.xml:420(para)
msgid ""
"Function prototype and definition, if present in the same file, can be "
"usually distinguished from the corrosponding line numbers. Prototypes "
"usually comes before the definition, so they are likely to have smaller line "
"numbers."
msgstr ""
"Las definiciones de función y los prototipos, si están presentes en el mismo "
"archivo, se pueden distinguir de los correspondientes números de línea. Los "
"prototipos generalmente están antes de la definición, de tal forma que "
"suelen tener números de línea más pequeños."

#: C/anjuta-manual.xml:406(para)
msgid ""
"<emphasis>Tags Browser:</emphasis> Tags browser is available on the Browser "
"toolbar. It shows a list of tags available in the currently active file "
"(souce file). If there is no tags (or sysmbols) available in the file, the "
"tags list will be invisible and a \"No Tags\" will be displayed instead. The "
"tags in this list are shown along with the line numbers where they are "
"found. If there are multiple symbols with the same name, they will be shown "
"with different line numbers. <placeholder-1/><placeholder-2/>"
msgstr ""
"<emphasis>Examinador de etiquetas:</emphasis> el examinador de etiquetas "
"está disponible desde la barra del examinador. Muestra una lista de las "
"etiquetas disponibles en el archivo actualmente activo (archivo fuente). Si "
"no hay ninguna etiqueta o símbolo disponible en el archivo, la lista de "
"etiquetas será invisible y en su lugar se mostrará «No hay etiquetas». Las "
"etiquetas en esta lista se muestran junto con los números de línea donde se "
"han encontrado. Si hay múltiples símbolos con el mismo nombre, entonces se "
"mostrarán con diferentes números de línea. <placeholder-1/><placeholder-2/>"

#: C/anjuta-manual.xml:438(screeninfo)
msgid "Symbol browser"
msgstr "Examinador de símbolos"

#: C/anjuta-manual.xml:428(para)
msgid ""
"<emphasis>Symbol Browser:</emphasis> If there is a project open, "
"<application>Anjuta</application> will scan for tags in all of the source "
"and header files of the project. This way it is possible to go to any "
"function definition, structure definition, class definition etc. without "
"manually opening the file. You don't even have to know which file that tag "
"is found in (except in the case of function definitions). The symbol browser "
"lists all the available symbols in the project. <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:446(title)
msgid "Tags synchronization"
msgstr "Sincronización de etiquetas"

#: C/anjuta-manual.xml:447(para)
msgid ""
"You don't have to worry about the synchronization and update of the tag "
"database. <application>Anjuta</application> will take care of everything. "
"You just have to decide which tag you want to go to!"
msgstr ""
"No tiene que preocuparse sobre la sincronización y actualización de la base "
"de datos de las etiquetas. <application>Anjuta</application> se encargará de "
"todo. Sólo tiene que decidir a qué etiqueta quiere ir."

#: C/anjuta-manual.xml:458(title)
msgid "Searching for and Replacing text in files"
msgstr "Buscar y reemplazar texto en los archivos"

#: C/anjuta-manual.xml:460(title)
msgid "Searching"
msgstr "Búsqueda"

#: C/anjuta-manual.xml:461(para)
msgid ""
"To search for a <emphasis>text</emphasis> or <emphasis>regular expression</"
"emphasis> string in the current file, choose <menuchoice><guimenu>Edit</"
"guimenu><guisubmenu>Search</guisubmenu><guimenuitem>Find</guimenuitem></"
"menuchoice> or press <keycombo><keycap>Ctrl</keycap><keycap>F</keycap></"
"keycombo>. This will open the <interface>Find</interface> dialog."
msgstr ""
"Para buscar un <emphasis>texto</emphasis> o una <emphasis>expresión regular</"
"emphasis> en el archivo actual, elija <menuchoice><guimenu>Editar</"
"guimenu><guisubmenu>Buscar</guisubmenu><guimenuitem>Buscar...</guimenuitem></"
"menuchoice> o pulse <keycombo><keycap>Ctrl</keycap><keycap>F</keycap></"
"keycombo>. Esto abrirá el diálogo <interface>Buscar</interface>."

#: C/anjuta-manual.xml:468(para)
msgid ""
"Use the text box to specify the string to search for, and select whether it "
"is a normal string or a regular expression (RegExp). It is also possible to "
"specify the direction of search, whether the search is case-sensitive or "
"not, and the scope of the search. Click <guibutton>Search</guibutton> to "
"start searching."
msgstr ""
"Use la caja de texto para especificar la cadena para buscar y seleccione si "
"es una cadena normal o una expresión regular (RegExp). También es posible "
"especificar la dirección de la búsqueda, si la búsqueda es sensible a "
"capitalización o no y el ámbito de búsqueda."

#: C/anjuta-manual.xml:474(para)
msgid ""
"If the search is successful, the matched text in the document will be "
"highlighted, marked... (according to the search action choice). If the "
"search is not successful, a <emphasis>The match \"search text\" was not "
"found</emphasis> message will be displayed."
msgstr ""
"Si la búsqueda tiene éxito, se resaltará el texto coincidente en el "
"documento, marcado... (en concordancia con la elección de la acción de "
"búsqueda). Si la búsqueda no tiene éxito, se mostrará el diálogo "
"<emphasis>No se ha encontrado ninguna coincidencia con «el texto buscado»</"
"emphasis>."

#: C/anjuta-manual.xml:479(para)
msgid ""
"If you want to search again, click on the <guibutton>Search</guibutton> "
"button on the main toolbar or press <keycombo><keycap>Ctrl</"
"keycap><keycap>G</keycap></keycombo>. This will find the next match "
"(<keycombo><keycap>Shift</keycap><keycap>Ctrl</keycap><keycap>G</keycap></"
"keycombo> for the previous match). You can even change the search text when "
"you do this. Enter the new string in the <guilabel>Search Expression</"
"guilabel> text box in the main toolbar."
msgstr ""
"Si quiere buscar de nuevo, pulse el botón <guibutton>Buscar</guibutton> en "
"la barra de herramientas principal o pulse <keycombo><keycap>Ctrl</"
"keycap><keycap>G</keycap></keycombo>. Esto buscará la siguiente coincidencia "
"(<keycombo><keycap>Mayús</keycap><keycap>Ctrl</keycap><keycap>G</keycap></"
"keycombo> para la coincidencia anterior). Puede incluso cambiar el texto de "
"búsqueda cuando haga esto. Introduzca la cadena nueva en la caja de texto "
"<guilabel>Expresión de búsqueda</guilabel> en la barra de herramientas "
"principal."

#: C/anjuta-manual.xml:488(title)
msgid "Search Text dialog"
msgstr "Diálogo de búsqueda de texto"

#: C/anjuta-manual.xml:493(para)
msgid "To stop a long research, choose <guibutton>Stop</guibutton> button."
msgstr ""
"Para parar una búsqueda prolongada, pulse el botón <guibutton>Detener</"
"guibutton>."

#: C/anjuta-manual.xml:496(para)
msgid ""
"If the \"Basic Search\" option is selected in the Setting window, the search "
"direction can be choosen from the Expression window."
msgstr ""
"Si la opción «Búsqueda básica» está seleccionada en la ventana Ajustes, la "
"dirección de búsqueda se puede elegir desde la ventana Expresión."

#: C/anjuta-manual.xml:501(title)
msgid "Basic Search Text dialog"
msgstr "Diálogo de texto Búsqueda básica"

#: C/anjuta-manual.xml:508(title)
msgid "Specifying Search Range"
msgstr "Especificar el ámbito de búsqueda"

#: C/anjuta-manual.xml:509(para)
msgid ""
"In the \"Search Target dialog\", define the search location and the action "
"to be done in case of search success."
msgstr ""
"En el diálogo «Buscar objetivo», defina la ubicación de la búsqueda y la "
"acción que realizar en caso de que la búsqueda tenga éxito."

#: C/anjuta-manual.xml:513(para)
msgid "The maximum number actions can be defined by User."
msgstr "El usuario puede definir el máximo número de acciones."

#: C/anjuta-manual.xml:517(title)
msgid "Search Target dialog"
msgstr "Diálogo Buscar objetivo"

#: C/anjuta-manual.xml:522(para)
msgid "The user can select where the text will be searched."
msgstr "El usuario puede seleccionar dónde se buscará el texto."

#: C/anjuta-manual.xml:526(title)
msgid "Search Target In choice"
msgstr "Buscar en el objetivo elegido"

#: C/anjuta-manual.xml:532(title)
msgid "Searching in Files"
msgstr "Buscar en archivos"

#: C/anjuta-manual.xml:533(para)
msgid ""
"To find text in your project, select \"search in\" <menuchoice><guimenu> All "
"Project Files</guimenu></menuchoice>."
msgstr ""
"Para buscar un texto en su proyecto, seleccione «Buscar en» "
"<menuchoice><guimenu>Todos los archivos del proyecto</guimenu></menuchoice>."

#: C/anjuta-manual.xml:537(para)
msgid ""
"Enter the text you want to search and specify search options (case-"
"sensitive, complete words ...). Click <guibutton>Search</guibutton> to start "
"searching."
msgstr ""
"Introduzca el texto que quiere buscar y especifique las opciones de búsqueda "
"(capitalización, palabras completas...). Pulse <guibutton>Buscar</guibutton> "
"para comenzar la búsqueda."

#: C/anjuta-manual.xml:542(para)
msgid ""
"To find text in File list, select \"search in\" <menuchoice><guimenu> "
"Specifying File List</guimenu></menuchoice>. Define the Search variables. "
"Click <guibutton>Search</guibutton> to start searching."
msgstr ""
"Para buscar texto en la lista de archivos, seleccione «Buscar en» "
"<menuchoice><guimenu>Especificar la lista de archivos</guimenu></"
"menuchoice>. Defina las variables de búsqueda. Pulse <guibutton>Buscar</"
"guibutton> para comenzar la búsqueda."

#: C/anjuta-manual.xml:548(title)
msgid "Search File Pattern"
msgstr ""

#: C/anjuta-manual.xml:558(title)
msgid "Specifying Search Action"
msgstr "Especificar la acción de la búsqueda"

#: C/anjuta-manual.xml:559(para)
msgid "The user selects which action will be done in case of search success."
msgstr ""
"El usuario selecciona qué acción se realizará en caso de que la búsqueda "
"tenga éxito."

#: C/anjuta-manual.xml:562(para)
msgid ""
"According to the previous selections (Search in, Search direction ...), some "
"actions coul be unavailable."
msgstr ""
"En concordancia con las secciones anteriores (Buscar en, Dirección de "
"búsqueda...) algunas acciones pueden no estar disponibles."

#: C/anjuta-manual.xml:567(title)
msgid "Search Target Action choice"
msgstr ""

#: C/anjuta-manual.xml:575(title) C/anjuta-manual.xml:583(title)
msgid "Replacing"
msgstr "Reemplazar"

#: C/anjuta-manual.xml:576(para)
msgid ""
"Search and replace is similar to just finding text, except that you also "
"specify the replace text in the <guilabel>Replace With:</guilabel> text box, "
"and whether or not you want to be prompted before the replace takes place "
"(Replace First Match or Replace All Matches)."
msgstr ""
"Buscar y reemplazar es similar a la busqueda simple de texto, excepto que "
"también especifica el texto de reemplazo en la caja de texto "
"<guilabel>Reemplazar por:</guilabel>, y si se debe preguntar antes de "
"realizar la acción de reemplazar (Reemplazar la siguiente coincidencia o "
"Reemplazar todas las coincidencias)."

#: C/anjuta-manual.xml:588(para)
msgid ""
"Choose <guibutton>Replace</guibutton> to replace the matched text or "
"<guibutton>Forward</guibutton> to jump to the next matched text."
msgstr ""
"Elija <guibutton>Reemplazar</guibutton> para reemplazar la cadena "
"coincidente o <guibutton>Adelante</guibutton> para saltar al siguiente texto "
"coincidente."

#: C/anjuta-manual.xml:595(title)
msgid "Search Setting"
msgstr "Ajustes de búsqueda"

#: C/anjuta-manual.xml:596(para)
msgid "The user has the possibility of saving the setting of his search options."
msgstr ""
"El usuario tiene la posibilidad de guardar el ajuste de sus opciones de "
"búsqueda."

#: C/anjuta-manual.xml:599(para)
msgid ""
"Item highlighted in red is the active item. Item by defaultt is the search "
"setting which is loaded at Anjuta launching."
msgstr ""
"El elemento resaltado en rojo es el elemento activo. El elemento "
"predeterminado es el ajuste de búsqueda que se carga al lanzar Anjuta."

#: C/anjuta-manual.xml:604(title)
msgid "Search Setting dialog"
msgstr ""

#: C/anjuta-manual.xml:615(title)
msgid "Printing a file"
msgstr "Imprimir un archivo"

#: C/anjuta-manual.xml:625(title)
msgid "Print preview of a C file"
msgstr "Vista preliminar de impresión de un archivo C"

#: C/anjuta-manual.xml:627(screeninfo)
msgid "Print preview"
msgstr "Vista previa de impresión"

#: C/anjuta-manual.xml:616(para)
msgid ""
"Print preview could be taken by selecting <menuchoice><guisubmenu>File</"
"guisubmenu><guimenuitem>Print Preview</guimenuitem></menuchoice>. It will "
"render the current file and present a preview of the print. Source codes "
"which are hilighted in the editor are also highlighted similarly in the "
"print (or preview). Addtional options are available to print with the line "
"numbers, wrapped lines and/or headers in the Editor printing preferences "
"from <menuchoice><guisubmenu>Settings</guisubmenu><guimenuitem>Preferences. "
"</guimenuitem></menuchoice><placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:634(title)
msgid "Print Preferences"
msgstr "Preferencias de impresión"

#: C/anjuta-manual.xml:636(screeninfo)
msgid "Print preferences"
msgstr "Preferencias de impresión"

#: C/anjuta-manual.xml:641(para)
msgid ""
"When you are ready to print and satisfied with the preview, select "
"<menuchoice><guisubmenu>File</guisubmenu><guimenuitem>Print</guimenuitem></"
"menuchoice> or <guibutton>Print</guibutton> from the print preview window. "
"This will bring up the actual print dialog as shown below. Select the "
"appropriate print parameters and print the file with <guibutton>Print</"
"guibutton> on it."
msgstr ""
"Cuando esté listo para imprimir y satisfecho con la vista previa, seleccione "
"<menuchoice><guisubmenu>Archivo</guisubmenu><guimenuitem>Imprimir</"
"guimenuitem></menuchoice> o <guibutton>Imprimir</guibutton> de la ventana de "
"vista previa de impresión. Esto mostrará el diálogo de impresión actual tal "
"y como se muestra debajo. Seleccione los parámetros de impresión adecuados e "
"imprima el archivo con el botón <guibutton>Imprimir</guibutton>."

#: C/anjuta-manual.xml:648(para)
msgid ""
"Landscaped or portrait page layout, paper size, page orientation and paper "
"type could also be set. Remember to set them up properly according to your "
"printer, otherwise printing may not come up properly."
msgstr ""
"Se puede ajustar la distribución horizontal o vertical, el tamaño del papel, "
"la orientación del papel y el tipo de papel. Recuerde ajustarlo debidamente "
"en concordancia con su impresora, de otra manera puede que no se imprima "
"correctamente."

#: C/anjuta-manual.xml:655(title) C/anjuta-manual.xml:657(screeninfo)
msgid "Print Dialog"
msgstr "Diálogo de impresión"

#: C/anjuta-manual.xml:3(title)
msgid "Project Management"
msgstr "Gestión de proyectos"

#: C/anjuta-manual.xml:5(para)
msgid ""
"Anjuta has a powerful Project Manager plugin which can open most <ulink type="
"\"info\" url=\"info:automake\">automake/autoconf</ulink> based projects. It "
"might fail on some oddly configured projects, but as long as the project is "
"done by using automake/autoconf in a typical way, it should work."
msgstr ""
"Anjuta tiene un potente complemento de Gestión de proyectos que puede abrir "
"la mayoría de los proyectos basados en <ulink type=\"info\" url=\"info:"
"automake\">automake/autoconf</ulink>. Puede que falle en algunos proyectos "
"con configuración antigua, pero siempre que el proyecto esté realizado "
"usando automake/autoconf de forma típica, entonces debería funcionar."

#: C/anjuta-manual.xml:13(para)
msgid ""
"The neat thing is that it does not store any project information beyond what "
"is already available in project struture. That is, there is no separate "
"project data maintained by Anjuta and all project processing are done "
"directly within the project structure. This allows the project to be "
"maintained or developed outside Anjuta without having to so-called 'porting' "
"or 'switching' to a new platform. Since technically Anjuta projects are just "
"automake projects, mixed development of it (Anjuta and non-Anjuta users) or "
"switching back and forth between Anjuta and other tools is quite possible "
"without any hindrance."
msgstr ""
"Lo interesante es que no almacena ninguna información del proyecto aparte de "
"la que ya está disponible en la estructura del proyecto. Esto es, no hay "
"datos de proyecto separados y mantenidos por Anjuta, y todos los "
"procesamientos de los proyectos se realizan directamente con la propia "
"estructura del proyecto. Esto permite que el proyecto se mantenga o "
"desarrolle fuera de Anjuta sin tener que realizar «portes» o «cambios» a "
"otras plataformas. Ya que técnicamente los proyectos en Anjuta son "
"simplemente proyectos automake, se puede desarrollar junto con otras "
"plataformas, programas o herramientas sin ningún problema."

#: C/anjuta-manual.xml:26(title)
msgid "Creating a New Project"
msgstr "Crear un proyecto nuevo"

#: C/anjuta-manual.xml:28(title)
msgid "New project from template"
msgstr "Proyecto nuevo desde una plantilla"

#: C/anjuta-manual.xml:29(para)
msgid ""
"The project wizard plugin uses a powerful template processing engine called "
"<application>autogen</application>. All new projects are created from "
"templates that are written in <application>autogen</application> syntax. "
"Project wizard lets you create new projects from a selection of project "
"templates. The selection includes simple generic, flat (no subdirectory), gtk"
"+, gnome, java, python projects and more. New templates can be easily "
"downloaded and installed since they are just a collection of text files."
msgstr ""
"El complemento de asistente de proyecto usa un potente motor de procesado de "
"plantillas llamado <application>autogen</application>. Todos los proyectos "
"nuevos se crean desde plantillas escritas con sintaxis <application>autogen</"
"application>. El asistente de proyectos le permite crear proyectos nuevos "
"desde una selección de plantillas de proyectos. La selección incluye "
"proyectos genéricos, planos (sin subdirectorios), GTK+, GNOME, Java, Python "
"y muchos más. Se pueden descargar e instalar plantillas nuevas de forma "
"sencilla ya que simplemente son una colección de archivos de texto."

#: C/anjuta-manual.xml:41(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>File</"
"guisubmenu><guisubmenu>New</guisubmenu><guimenuitem>Project …</guimenuitem></"
"menuchoice> to start the application wizard. Read the <interface>first page</"
"interface> carefully. Click on <guibutton>Next</guibutton> to proceed."
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Archivo</"
"guisubmenu><guisubmenu>Nuevo</guisubmenu><guimenuitem>Proyecto...</"
"guimenuitem></menuchoice> para iniciar el asistente. Lea la "
"<interface>primera página</interface> cuidadosamente. Pulse en "
"<guibutton>Siguiente</guibutton> para continuar."

#: C/anjuta-manual.xml:48(para)
msgid ""
"Select the type of application you want to create in the <interface>second "
"page</interface>. Click on <guibutton>Next</guibutton> to proceed."
msgstr ""
"En la <interface>segunda página</interface> seleccione el tipo de aplicación "
"que desea crear. Pulse <guibutton>Siguiente</guibutton> para continuar."

#: C/anjuta-manual.xml:54(para)
msgid ""
"On the next pages, enter all necessary details for your project. You can "
"change these settings later also, but it is advicable to put them right in "
"first run to maintain the project's integrity. White spaces or any non-"
"alphanumeric characters, except underscore (_) and dash (-), are not allowed "
"in many of the entry boxes that would follow (except perhaps the "
"<guilabel>Author</guilabel> text box)."
msgstr ""
"Introduzca todos los detalles necesarios para su proyecto en las siguientes "
"páginas. Puede cambiar estos ajustes posteriormente pero no es recomendable "
"no prestarlos atención para mantener mejor la integridad del proyecto. En "
"muchas de las cajas de entrada que seguirán (excepto la caja de "
"<guilabel>Autor</guilabel>) no se permiten los espacios en blanco o "
"cualquier carácter no alfanumérico, excepto el guión bajo (_) y el guión (-)"

#: C/anjuta-manual.xml:65(para)
msgid ""
"You can also specify whether your project will have "
"<emphasis>internationalization support</emphasis> using "
"<application>gettext</application> (read the <ulink type=\"info\" url=\"info:"
"gettext\">gettext info page</ulink> for more details). This gives your "
"project multilingual support for different regional languages such as "
"English, French, Dutch etc.. The rest of the options are for setting whether "
"the GNU copyright statement should appear in the comments at the top of each "
"file, and enabling GNOME desktop menu information if necessary. Shared "
"library support allows adding shared library modules later in the project. "
"If you plan to have libraries in your project, it would be good to enable. "
"Depending on the project type that is being created, there would be other "
"information requested."
msgstr ""

#: C/anjuta-manual.xml:81(para)
msgid ""
"The final step is to verify the information you have just supplied. Click on "
"<guibutton>Finish</guibutton> to start generating the project."
msgstr ""
"El paso final es comprobar la información que acaba de proporcionar. Pulse "
"<guibutton>Terminar</guibutton> para comenzar a generar el proyecto."

#: C/anjuta-manual.xml:86(para)
msgid ""
"Once project generation is over, you can try it out by building the project "
"and executing it."
msgstr ""
"Una vez que la generación del proyecto ha terminado, puede probarla "
"construyendo el proyecto y ejecutándolo."

#: C/anjuta-manual.xml:92(title)
msgid "Importing Projects"
msgstr "Importar proyectos"

#: C/anjuta-manual.xml:93(para)
msgid ""
"The import project feature is used to import an already existing project and "
"convert it into <application>anjuta</application> projcect. Activate the "
"import project wizard from <menuchoice><guimenu>File</guimenu><guimenu>New</"
"guimenu><guimenuitem>Project from existing sources</guimenuitem></"
"menuchoice> and follow instructions dictated by the wizard. Once the project "
"is imported, it could be opened in <application>anjuta</application> "
"subsequently just like any other <application> anjuta</application> project."
msgstr ""
"La característica de importación de proyectos se usa para importar un "
"proyecto ya existente y convertirlo en un proyecto <application>Anjuta</"
"application>. Active el asistente de importación de proyectos desde "
"<menuchoice><guimenu>Archivo</guimenu><guimenu>Nuevo</"
"guimenu><guimenuitem>Proyecto desde fuentes existentes</guimenuitem></"
"menuchoice> y siga las instrucciones dictadas por el asistente. Una vez que "
"el proyecto esté importado, se podrá abrir en <application>Anjuta</"
"application> como cualquier otro proyecto de <application>Anjuta</"
"application>."

#: C/anjuta-manual.xml:103(para)
msgid ""
"The import project features only works if your existing project is using "
"<ulink type=\"info\" url=\"info:automake\">autoconf/automake</ulink> and, to "
"a very limited extend, plain makefiles."
msgstr ""
"La característica de importación de proyectos sólo funciona para proyectos "
"existentes que usen<ulink type=\"info\" url=\"info:automake\">autoconf/"
"automake</ulink> y para un número muy limitado de archivos planos makefile."

#: C/anjuta-manual.xml:113(title)
msgid "Loading and Saving Projects"
msgstr "Cargar y guardar proyectos"

#: C/anjuta-manual.xml:115(title)
msgid "Loading Projects"
msgstr "Cargar proyectos"

#: C/anjuta-manual.xml:116(para)
msgid ""
"To open a project, choose the menu item <menuchoice><guisubmenu>File</"
"guisubmenu><guimenuitem>Open …</guimenuitem></menuchoice>. Select the "
"project file (<filename>*.anjuta</filename>) in the dialog and click "
"<guibutton>OK</guibutton>."
msgstr ""

#: C/anjuta-manual.xml:123(para)
msgid ""
"If the project has recently been opened, then you will find it listed in the "
"menu <menuchoice><guisubmenu>File</guisubmenu><guisubmenu>Recent</"
"guisubmenu></menuchoice>. Choose the project file from the list, and the "
"project will be opened."
msgstr ""

#: C/anjuta-manual.xml:128(para)
msgid ""
"As soon as a project is opened, <application>Anjuta</application> will enter "
"<emphasis>Project mode</emphasis>. There are three panes in the project "
"window. The first is the project pane and lists the project files organized "
"in file types. The second is the symbol browser, which has already been "
"discussed in section <emphasis>Symbol Browser and tags Brwoser</emphasis>. "
"The third pane is the file view of the project and is more or less similar "
"to a mini file-manager. In file view, all the files present in the project "
"tree is visible. Right clicking on these files will pop up the file "
"operation submenu."
msgstr ""

#: C/anjuta-manual.xml:138(para)
msgid ""
"If the project is also a CVS tree, then corresponing file revision numbers "
"are also listing on the right of file names in the file view pane."
msgstr ""

#: C/anjuta-manual.xml:144(title)
msgid "Saving Projects"
msgstr ""

#: C/anjuta-manual.xml:145(para)
msgid ""
"The project is automatically saved when you close because all changes are "
"made directly in the project structure."
msgstr ""

#: C/anjuta-manual.xml:153(title)
msgid "Project structure"
msgstr ""

#: C/anjuta-manual.xml:154(para)
msgid ""
"<interface>Project View</interface> lists the project in standard <ulink "
"type=\"info\" url=\"info:automake\"><application>automake</application></"
"ulink> heirarchy organized into groups of targets. <emphasis>Groups</"
"emphasis> correspond to directories in your project and <emphasis>targets</"
"emphasis> correspond to normal <application>automake</application> targets "
"(not to be confused with make targets). <interface>Project View</interface> "
"actually has two parts; one part (lower one) shows complete project "
"heirarchy and the other part (upper one) lists important targets directly. "
"Important targets constitute executable and library targets -- making them "
"very accessible in from the view. This is particularly useful in big "
"projects where the heirarchy could be deep and hard to navigate from the "
"tree alone. Targets are, in turn, composed of source files."
msgstr ""

#: C/anjuta-manual.xml:174(para)
msgid ""
"<emphasis>Groups</emphasis> are used to logically organize targets. A "
"project can contain any number of groups. Each group can have sub-groups as "
"well as targets. In automake projects, groups are just sub-directories in "
"the project. The top level group is called root and is always \"/\"."
msgstr ""

#: C/anjuta-manual.xml:182(para)
msgid ""
"<emphasis>Targets</emphasis> are the build targets in project, such as "
"programs (executable binaries), scripts, libraries, miscellaneous data etc. "
"Not all target types are built from sources, but exist just to organize the "
"sources and therefore may not exist physically (e.g. Miscellaneous data "
"target). Targets exist under groups. See <link linkend=\"adding-target\">"
"\"Adding targets\"</link> for full list of available target types."
msgstr ""

#: C/anjuta-manual.xml:193(para)
msgid ""
"<emphasis>Source files</emphasis> are the files used to build the targets or "
"just to be part of it. They exist only under targets. Many target types "
"expect certain type of source files (e.g. programs and libraries target "
"types), but some can accept any file (e.g. Miscellaneous data target)."
msgstr ""

#: C/anjuta-manual.xml:203(para)
msgid ""
"Each of the project groups and targets is configurable in standard "
"<application>automake</application> way. You can set complier and linker "
"flags directly for each target, or set configure variables. Groups allow "
"setting installation destinations for its targets."
msgstr ""

#: C/anjuta-manual.xml:210(para)
msgid ""
"Just like file manager, project manager view also has convenience actions "
"(accessible from context menu) for the source files and targets."
msgstr ""

#: C/anjuta-manual.xml:215(para)
msgid ""
"Many command-line tools are available to maintain and manage a project, and "
"each tool has its own specific rules and capabilities. <application>Anjuta</"
"application> tries to automate most of the common operations using plugins. "
"However, you might occationally still need to do them manually."
msgstr ""

#: C/anjuta-manual.xml:223(para)
msgid ""
"It is possible to make use of other tools or hand edit the project files "
"simulaneously. It doesn't matter if the project is loaded in "
"<application>Anjuta</application> or not. <application>Anjuta</application> "
"would update itself with any external changes made to project."
msgstr ""

#: C/anjuta-manual.xml:232(title)
msgid "Groups and targets"
msgstr ""

#: C/anjuta-manual.xml:235(title)
msgid "Adding Groups"
msgstr ""

#: C/anjuta-manual.xml:240(para)
msgid ""
"Select <menuchoice><guisubmenu>Project</guisubmenu><guimenuitem>Add Group</"
"guimenuitem></menuchoice> and a dialog to add a new group would popup."
msgstr ""

#: C/anjuta-manual.xml:247(para)
msgid "Select the group under which to add new group."
msgstr ""

#: C/anjuta-manual.xml:250(para)
msgid "Give a name of the new group and click Ok."
msgstr ""

#: C/anjuta-manual.xml:236(para)
msgid ""
"To add a new group (a directory in automake based projects): <placeholder-1/"
"> With automake projects, a new directory with the given name would be "
"created under the parent group's directory."
msgstr ""

#: C/anjuta-manual.xml:257(para)
msgid ""
"New group can also be added from the <guimenu>Operation</guimenu> menu in "
"<interface>Project View</interface> by selecting <guimenuitem>Add Group</"
"guimenuitem>. First select the group under which to add the group in "
"<interface>Project View</interface>."
msgstr ""

#: C/anjuta-manual.xml:266(title)
msgid "Removing Groups"
msgstr ""

#: C/anjuta-manual.xml:271(para)
msgid "Select the target in <interface>Project Manager view</interface>."
msgstr ""

#: C/anjuta-manual.xml:274(para) C/anjuta-manual.xml:413(para)
msgid ""
"Select <guimenuitem>Remove</guimenuitem> from the <guimenu>Operation</"
"guimenu> menu."
msgstr ""

#: C/anjuta-manual.xml:267(para)
msgid ""
"To remove a group: <placeholder-1/> The target and sources associated with "
"the group will also be removed from the project (they are not deleted from "
"the file system, though. You can still add them later)."
msgstr ""

#: C/anjuta-manual.xml:285(title)
msgid "Adding Targets"
msgstr ""

#: C/anjuta-manual.xml:290(para)
msgid ""
"Select <menuchoice><guisubmenu>Project</guisubmenu><guimenuitem>Add Target</"
"guimenuitem></menuchoice> and a dialog to add a new target would popup."
msgstr ""

#: C/anjuta-manual.xml:295(para)
msgid "Select the group under which to add the target."
msgstr ""

#: C/anjuta-manual.xml:298(para)
msgid "Select the target type."
msgstr ""

#: C/anjuta-manual.xml:301(para)
msgid "Give a name of the new target and click Ok."
msgstr ""

#: C/anjuta-manual.xml:286(para)
msgid "To add a new target: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:305(para)
msgid ""
"New target can also be added from the <guimenu>Operation</guimenu> menu in "
"<interface>Project View</interface> by selecting <guimenuitem>Add target</"
"guimenuitem>. First select the group under which to add the target in "
"<interface>Project View</interface>."
msgstr ""

#: C/anjuta-manual.xml:311(para)
msgid ""
"Target names usually require some standard prefix and suffix, depending on "
"the type of target. Anjuta would warn if the name is not valid and may give "
"an example of a name."
msgstr ""

#: C/anjuta-manual.xml:320(para)
msgid ""
"<emphasis>Program</emphasis> target type is for executable binaries. Select "
"this if you want to add an executable to the project. By default, all "
"program targets would be installed in standard executable directory, e.g. /"
"usr/bin or /usr/local/bin. You can override it by specifying a different "
"installation directory in its group properties."
msgstr ""

#: C/anjuta-manual.xml:329(para)
msgid ""
"<emphasis>Shared Library</emphasis> target type is for shared or dynamic "
"libraries. Select this if you are adding a shared library to the project. By "
"default, all shared libraries are installed in standard libraries directory, "
"e.g. /usr/lib or /usr/local/lib. You can override it by specifying a "
"different installation directory in its group properties."
msgstr ""

#: C/anjuta-manual.xml:338(para)
msgid ""
"<emphasis>Static Library</emphasis> target type is for static library. "
"Select this if you are adding a static library to the project. By default, "
"all static libraries are installed in standard libraries directory, e.g. /"
"usr/lib or /usr/local/lib. You can override it by specifying a different "
"installation directory in its group properties."
msgstr ""

#: C/anjuta-manual.xml:347(para)
msgid ""
"<emphasis>Java module</emphasis> target type is for java module. Select this "
"if you are grouping java sources into a module. You need to provide an "
"installation directory for this target where the .class files will be "
"installed. It can be set in group properties of the group where this target "
"belongs."
msgstr ""

#: C/anjuta-manual.xml:355(para)
msgid ""
"There can really be only one java module in a group. This is a restriction "
"put by automake. Please read automake info page for more details."
msgstr ""

#: C/anjuta-manual.xml:363(para)
msgid ""
"<emphasis>Python module</emphasis> target type is for python module. Select "
"this if you are grouping python sources into a module. You need to provide "
"an installation directory for this target where the sources will be "
"installed. It can be set in group properties of the group where this target "
"belongs."
msgstr ""

#: C/anjuta-manual.xml:372(para)
msgid ""
"<emphasis>Scripts</emphasis> target is to group scripts. They will be "
"installed in standard executable directory."
msgstr ""

#: C/anjuta-manual.xml:378(para)
msgid ""
"<emphasis>Miscellaneous Data</emphasis> target type is to group simple files "
"in the project. An installation directory needs to be specified in its group "
"properties."
msgstr ""

#: C/anjuta-manual.xml:385(para)
msgid ""
"<emphasis>Header Files</emphasis> target type is to group C/C++ header files "
"that need to be installed in system (for example as part of library API). "
"For header files that do not need to be installed, make them part of the "
"Program target along with the sources. They will be installed in standard "
"include directory unless installation path is specified in its group "
"properties."
msgstr ""

#: C/anjuta-manual.xml:395(para)
msgid ""
"<emphasis>Man documentation</emphasis> and <emphasis>Info documentation</"
"emphasis> target types are for grouping man and info documentation "
"respectively. By default, they will be installed in standard installation "
"directories."
msgstr ""

#: C/anjuta-manual.xml:316(para)
msgid ""
"There are several target types for automake project. They are: <placeholder-"
"1/>"
msgstr ""

#: C/anjuta-manual.xml:405(title)
msgid "Removing Targets"
msgstr ""

#: C/anjuta-manual.xml:410(para)
msgid "Select the target in <interface>Project Manager view</interface>"
msgstr ""

#: C/anjuta-manual.xml:406(para)
msgid ""
"To remove a target: <placeholder-1/> The sources associated with the targets "
"will also be removed from the project (they are not deleted from the file "
"system, though)."
msgstr ""

#: C/anjuta-manual.xml:425(title)
msgid "Adding and Removing Files"
msgstr ""

#: C/anjuta-manual.xml:427(title)
msgid "Adding Source Files"
msgstr ""

#: C/anjuta-manual.xml:428(para)
msgid ""
"Select menu item <menuchoice><guisubmenu>Project</"
"guisubmenu><guimenuitem>Add Source File</guimenuitem></menuchoice>. From the "
"dialog, select the target to which the file should be added and the file "
"itself. You can add multiple files at once. To do that, select multiple "
"files from the fileselection dialog using either SHIFT or CONTROL key. Then "
"click <guibutton>Add</guibutton> button to finally add the files in project."
msgstr ""

#: C/anjuta-manual.xml:437(para)
msgid ""
"By default, current editor file would be preselected for addtion in the "
"dialog. Other convenient way to add a file is to select it in "
"<interface>File Manager</interface> and choosing <guimenuitem>Add to "
"project</guimenuitem> from the <guimenu>Operation</guimenu> popup menu."
msgstr ""

#: C/anjuta-manual.xml:444(para)
msgid ""
"If the file you choose has already been added to the project, then "
"<application>Anjuta</application> will not add it again. It will also give "
"you a warning that the file is already added."
msgstr ""

#: C/anjuta-manual.xml:449(para)
msgid ""
"If the file you choose is not in the project directory, you will be asked to "
"confirm that you wish to copy the file into the target's directory. "
"<application>Anjuta</application> cannot add files which are outside of "
"target's directory."
msgstr ""

#: C/anjuta-manual.xml:457(title)
msgid "Removing Source Files"
msgstr ""

#: C/anjuta-manual.xml:458(para)
msgid ""
"To remove a file from the project, select the file you want to remove from "
"the <interface>Project View</interface>, right-click to open the "
"<guimenu>Operation</guimenu> popup menu and choose <guimenuitem>Remove</"
"guimenuitem>."
msgstr ""

#: C/anjuta-manual.xml:464(para)
msgid ""
"A confirmation dialog will appear, and the file will be removed from the "
"project."
msgstr ""

#: C/anjuta-manual.xml:469(title)
msgid "The file is not deleted!"
msgstr ""

#: C/anjuta-manual.xml:470(para)
msgid ""
"The file is not deleted from the filesystem. It still exists, and you can "
"add it back again later if you so wish. The file is only removed from the "
"project listing, and will not take part in any of the project operations "
"such as compiling, building, distribution etc.."
msgstr ""

#: C/anjuta-manual.xml:481(title)
msgid "Project Configuration"
msgstr ""

#: C/anjuta-manual.xml:482(para)
msgid ""
"Project configuration involves setting the correct build flags for targets, "
"groups and project itself. You can set these flags in their respective "
"properties dialog."
msgstr ""

#: C/anjuta-manual.xml:488(para)
msgid ""
"You can freely use autoconf and automake variables that are automatically "
"set for the project during configuration. Apart from these automatically set "
"variables, you can also defined your own variables in <link linkend="
"\"project-properties\">Project Properties</link> use them in properties. "
"This will make it easy to update flags later, especially when the variable "
"is used in several targets."
msgstr ""

#: C/anjuta-manual.xml:503(para)
msgid ""
"<emphasis>$(prefix)</emphasis>: The installation prefix. The project is "
"installed under various sub-directories under this prefix. By default it is /"
"usr/local."
msgstr ""

#: C/anjuta-manual.xml:510(para)
msgid ""
"<emphasis>$(bindir)</emphasis>: The installation directory for executable "
"binaries. All your executable and scripts targets would be installed in this "
"directory. By default, it is $(prefix)/bin."
msgstr ""

#: C/anjuta-manual.xml:517(para)
msgid ""
"<emphasis>$(libdir)</emphasis>: The installation directory for libraries. "
"All your library targets (both shared and static) would be installed in this "
"directory or a subdirectory below it. By default, it is $(prefix)/lib."
msgstr ""

#: C/anjuta-manual.xml:525(para)
msgid ""
"<emphasis>$(module_CFLAGS)</emphasis> and $(module_LIBS): These flags are "
"set by configure for the packages that your project depends on. The packages "
"used by the project are set in <link linkend=\"project-properties\">Project "
"Properties</link>. 'module' is the packages group that you give in project "
"properties."
msgstr ""

#: C/anjuta-manual.xml:497(para)
msgid ""
"Some of the many common variables are listed here. For full list of them see "
"<ulink url=\"info:automake\">automake info documentation</ulink>. "
"<placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:539(title)
msgid "Project properties"
msgstr "Propiedades del proyecto"

#: C/anjuta-manual.xml:546(para)
msgid ""
"Set project name, version and URL in <guibutton>General</guibutton> page. "
"Configure variables can also be use in these fields. The URL is the bug "
"report URL for the project."
msgstr ""

#: C/anjuta-manual.xml:553(para)
msgid ""
"Add and remove dependencies for your project in <guibutton>Packages</"
"guibutton> page. See below for details."
msgstr ""

#: C/anjuta-manual.xml:559(para)
msgid ""
"Create more configure variables in <guibutton>Variables</guibutton> page to "
"use in group and target properties."
msgstr ""

#: C/anjuta-manual.xml:540(para)
msgid ""
"Project properties dialog can be only brought by choosing "
"<menuchoice><guisubmenu>Project</guisubmenu><guimenuitem>Properties</"
"guimenuitem></menuchoice>. You can: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:574(title) C/anjuta-manual.xml:576(screeninfo)
msgid "Project properties dialog"
msgstr ""

#: C/anjuta-manual.xml:566(para)
msgid ""
"Dependencies are external packages that the project uses and hence required "
"to build it. Only packages installed using <ulink url=\"info:pkg-config"
"\">pkg-config</ulink> can be added from this interface. For others, the "
"configure.ac file can be edited manually. <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:581(para)
msgid ""
"External package dependencies are grouped into <emphasis>modules</emphasis>, "
"so that their combined build flags can be conviniently added to different "
"targets. <emphasis>Modules</emphasis> are just arbitrary names given to "
"group the packages and can be named anything (only alphanumeric and _ are "
"allowed in module name). Usually, they follow the name of targets they would "
"be use in. Consequently, for small projects with single targets, just one "
"module to hold all dependencies is enough."
msgstr ""

#: C/anjuta-manual.xml:590(para)
msgid ""
"Each package exports a set of <emphasis>compiler flags</emphasis> and "
"<emphasis>libraries</emphasis>. They are aggregated together for all "
"packages under a module and configure variables <emphasis>$(module_CFLAGS)</"
"emphasis> and <emphasis>$(module_LIBS)</emphasis> are defined. These "
"variables can then be used in <link linkend=\"group-properties\">Group "
"properties</link> and <link linkend=\"target-properties\">Target properties</"
"link>."
msgstr ""

#: C/anjuta-manual.xml:603(para)
msgid ""
"Select <menuchoice><guisubmenu>Project</guisubmenu><guimenuitem>Properties</"
"guimenuitem></menuchoice> to bring up project properties dialog."
msgstr ""

#: C/anjuta-manual.xml:610(para)
msgid "Select the tab <guibutton>Packages</guibutton> to bring up packages page."
msgstr ""

#: C/anjuta-manual.xml:614(para)
msgid ""
"Select the <emphasis>module</emphasis> to add the package to. If there is no "
"module created yet or there is no appropriate module, create one by clicking "
"<guibutton>Add module</guibutton>. Give a sensible name to the module, "
"preferably in UPPERCASE to match with rest of configure variables (only use "
"alphanumeric and '_' characters) and press <keycap>Enter</keycap> to create "
"it."
msgstr ""

#: C/anjuta-manual.xml:624(para)
msgid ""
"Click <guibutton>Add package</guibutton> to bring up package selection "
"dialog."
msgstr ""

#: C/anjuta-manual.xml:627(para)
msgid "Select the package to add and click <guibutton>Add</guibutton>."
msgstr ""

#: C/anjuta-manual.xml:630(para)
msgid "Click <guibutton>Close</guibutton> to close the properties dialog."
msgstr "Pulse <guibutton>Cerrar</guibutton> para cerrar el diálogo de propiedades."

#: C/anjuta-manual.xml:599(para)
msgid "To add a package dependency: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:637(title)
msgid "Group properties"
msgstr "Propiedades del grupo"

#: C/anjuta-manual.xml:638(para)
msgid ""
"To set group properties, select it in the <interface>Project View</"
"interface> and active it. You can also bring it by selecting "
"<menuchoice><guimenu>Operation menu</guimenu><guimenuitem>Properties</"
"guimenuitem></menuchoice>"
msgstr ""

#: C/anjuta-manual.xml:654(para)
msgid ""
"<emphasis>Includes</emphasis>: Set your $(module_CFLAGS) variables and other "
"include directories for your c and c++ targets. You need to provide the full "
"include options of the compiler here, e.g. -I/usr/include/blah. The include "
"paths will be use to find the include files in your source files. You can "
"also add other sort of compiler flags here, but they are prefered to be set "
"in their respective compiler flags properties (see below)."
msgstr ""

#: C/anjuta-manual.xml:664(para)
msgid ""
"Usually your configure script would also make some automatically determined "
"compiler flags. The variables usually end with _CFLAGS, e.g "
"$(PACKAGE_CFLAGS). They are also set here. See setting <link linkend="
"\"project-properties\">Project properties</link> for more details on these "
"variables."
msgstr ""

#: C/anjuta-manual.xml:674(para) C/anjuta-manual.xml:715(para)
msgid ""
"<emphasis>Compiler settings</emphasis>: Set your compiler specific flags "
"here. There are different fields for different compiler categories. Flags "
"that can be set here depend on the actual compiler used. The default "
"compiler use for c/c++ is gcc/g++ (gnu c compiler). Check out <ulink url="
"\"info:gcc\">gcc info documentation</ulink> for more details."
msgstr ""

#: C/anjuta-manual.xml:684(para)
msgid ""
"<emphasis>Install directories</emphasis>: Targets in the group that require "
"installation directories would each get a field to enter the installation "
"directory. Set their installation directories as relative to one of the many "
"automake directory variables, such as $(prefix), $(bindir), $(libdir), "
"$(datadir) etc."
msgstr ""

#: C/anjuta-manual.xml:645(para)
msgid ""
"<emphasis>Group Properties</emphasis> set to a group applies to all the "
"targets under it. So any compiler or linker flags set there would be "
"automatically be part of all the targets in it (in addition the targets "
"individual properties). Folowing flags are available in group properties. "
"<placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:699(title)
msgid "Target properties"
msgstr "Propiedades del destino"

#: C/anjuta-manual.xml:700(para)
msgid ""
"To set target properties, select it in the <interface>Project View</"
"interface> and active it. You can also bring it by selecting "
"<menuchoice><guimenu>Operation menu</guimenu><guimenuitem>Properties</"
"guimenuitem></menuchoice>"
msgstr ""

#: C/anjuta-manual.xml:725(para)
msgid ""
"<emphasis>Linker flags</emphasis>: Set linker flags that should be used when "
"linking the target. It applies only to Program and library targets. See "
"<ulink url=\"info:ld\">ld info documentation</ulink> for available linker "
"options."
msgstr ""

#: C/anjuta-manual.xml:733(para)
msgid ""
"<emphasis>Libraries</emphasis>: Set the libraries that the target depends "
"on. Usually they are the $(module_LIBS) configure variables. See setting "
"<link linkend=\"project-properties\">Project properties</link> for more "
"details on these variables."
msgstr ""

#: C/anjuta-manual.xml:707(para)
msgid ""
"<emphasis>Target Properties</emphasis> set to a target applies to that "
"target. So any compiler or linker flags set there would be just part of it "
"(in addition the its group properties). Folowing flags are available in "
"target properties. <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:748(title)
msgid "Compiling and Building"
msgstr ""

#: C/anjuta-manual.xml:750(title)
msgid "Overview"
msgstr "Vista general"

#: C/anjuta-manual.xml:751(para)
msgid "An executable for a project is generated in two steps:"
msgstr ""

#: C/anjuta-manual.xml:756(para)
msgid "Compiling"
msgstr ""

#: C/anjuta-manual.xml:757(para)
msgid "Linking"
msgstr "Enlazar"

#: C/anjuta-manual.xml:760(para)
msgid ""
"These steps are collectively known as <emphasis>Building</emphasis>. Some "
"other steps may also be involved in the build process, but for the sake of "
"simplicity, we will only look at these two steps."
msgstr ""

#: C/anjuta-manual.xml:765(para)
msgid ""
"<emphasis>Compiling</emphasis> is the step in which object files are "
"generated from their corresponding source files. For instance, a source file "
"<filename>hello.c</filename> will generate <filename>hello.o</filename> "
"after compilation. Usually you do not need to worry about these object files "
"— just think of them as intermediate files involved in creating the final "
"executable."
msgstr ""

#: C/anjuta-manual.xml:772(para)
msgid ""
"Once the object files (<filename>*.o</filename> files) are ready, they are "
"all linked together (along with any libraries) to generate the final "
"executable. This step is called <emphasis>Linking</emphasis>."
msgstr ""

#: C/anjuta-manual.xml:779(title)
msgid "Compiling the source"
msgstr "Compilar los fuentes"

#: C/anjuta-manual.xml:780(para)
msgid ""
"In a project, the individual source files can be compiled separately into "
"objects (<filename>*.o</filename> files). Although you do not have to worry "
"about these object files, sometimes it is handy to compile a file first (for "
"example, to make sure there are no syntax errors). Building a whole project "
"can take a lot of time, especially in the case of larger and more complex "
"applications. Therefore, you will probably go through a series of edit-"
"compile-edit-compile-.... loops while a developing the project."
msgstr ""

#: C/anjuta-manual.xml:788(para)
msgid ""
"To compile a file, choose the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Compile</guimenuitem></menuchoice> or press "
"<keycap>F11</keycap>. This will compile the active file."
msgstr ""

#: C/anjuta-manual.xml:795(title)
msgid "Building an executable"
msgstr "Construir un ejecutable"

#: C/anjuta-manual.xml:796(para)
msgid ""
"<application>Anjuta</application> has no separate link command, simply "
"because it is not necessary. The build process will compile all the source "
"files and link them together along with the libraries. The build command "
"will note recompile those files which are already up-to-date (this is called "
"the <emphasis>dependency check</emphasis>). If you have already compiled all "
"of the files individually, then the only thing the build step performs is "
"the link. If you have already built the project and no dependent file has "
"been modified, even the link stage will be skipped."
msgstr ""

#: C/anjuta-manual.xml:805(para)
msgid ""
"So how exactly does the dependency check influence the project development? "
"If you have modified a file, then all of the source files that depend on the "
"modified file are recompiled. All files (not only the object files and "
"executable) in the project are checked for these dependencies during the "
"build process. If it is found that a particular file is dependent on some "
"other file which has been modified, then that file will be re-generated."
msgstr ""

#: C/anjuta-manual.xml:813(para)
msgid ""
"Since you have now got a rough understanding of the value of the dependency "
"check, can you imagine how your life (as a programmer) would be if it had "
"not been there? If you cannot answer just yet, then will find out when you "
"start developing big projects!"
msgstr ""

#: C/anjuta-manual.xml:818(para)
msgid ""
"<menuchoice><guisubmenu>Build</guisubmenu><guimenuitem>Build</guimenuitem></"
"menuchoice> will build all of the files in the <filename class=\"directory"
"\">src</filename> (source) directory, and generate the executable. "
"<menuchoice><guisubmenu>Build</guisubmenu><guimenuitem>Build All</"
"guimenuitem></menuchoice> will build the whole project — all of the "
"subdirectories (including <filename class=\"directory\">src</filename>), are "
"built recursively."
msgstr ""

#: C/anjuta-manual.xml:828(title)
msgid "Creating a distribution package"
msgstr "Crear un paquete de distribución"

#: C/anjuta-manual.xml:829(para)
msgid ""
"To build the tarball distribution of the project choose "
"<menuchoice><guisubmenu>Build</guisubmenu><guimenuitem>Build Tarball</"
"guimenuitem></menuchoice>. This will create a tarball (<filename>*.tar.gz</"
"filename>) and put it in the top level project directory. Copy the file to a "
"safe place for distribution."
msgstr ""

#: C/anjuta-manual.xml:837(title)
msgid "Install"
msgstr "Instalación"

#: C/anjuta-manual.xml:838(para)
msgid ""
"Choosing the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Install</guimenuitem></menuchoice> will install the "
"generated application on your system."
msgstr ""

#: C/anjuta-manual.xml:844(title)
msgid "System wide installation"
msgstr ""

#: C/anjuta-manual.xml:845(para)
msgid ""
"You must be logged in as root to perform a system-wide install. Also note "
"that for a GNOME application to use the pixmaps in the project, it must be "
"installed as a system-wide application. Otherwise, when the application is "
"executed in your project, there will be lots of \"pixmap not found\" errors. "
"You can configure anjuta to use <command>sudo</command> or <command>su</"
"command> before installing the project in the build preferences."
msgstr ""

#: C/anjuta-manual.xml:855(title)
msgid "Configure"
msgstr "Configurar"

#: C/anjuta-manual.xml:856(para)
msgid ""
"To run the <filename>configure</filename> script found in the top level "
"project directory, choose the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Configure</guimenuitem></menuchoice>. The script "
"will determine the system configuration and create some of the files "
"required to perform a build (such as <filename>Makefile</filename> and "
"<filename>config.h</filename>). This is necessary because the application "
"may depend on specific configuration of some of these options."
msgstr ""

#: C/anjuta-manual.xml:865(title)
msgid "When to configure"
msgstr ""

#: C/anjuta-manual.xml:866(para)
msgid ""
"Until you run <filename>configure</filename>, you cannot start building the "
"project."
msgstr ""

#: C/anjuta-manual.xml:871(para)
msgid ""
"The <filename>configure</filename> script is (usually) run only once at the "
"beginning of the first build process — for example, just after you have "
"extracted a source tarball of a project distribution. After that, "
"configuration is automatically handled by the subsequent build processes. If "
"you have used the <emphasis>Application Wizard</emphasis> to create the "
"application, then you will not need to run <filename>configure</filename> "
"separately: the wizard will run it as a part of the project generation "
"process."
msgstr ""

#: C/anjuta-manual.xml:879(para)
msgid ""
"You can also supply additional options to the configuration script. After "
"choosing the <guimenuitem>Configure</guimenuitem> menu item, a dialog will "
"appear to prompt for additional options."
msgstr ""

#: C/anjuta-manual.xml:885(title) C/anjuta-manual.xml:887(screeninfo)
msgid "Configure options dialog"
msgstr ""

#: C/anjuta-manual.xml:891(para)
msgid ""
"Enter any options (or leave it blank to accept the defaults) and click "
"<guibutton>OK</guibutton>. To find out the options available to the "
"<filename>configure</filename> script, enter <userinput>--help</userinput> "
"in the option entry box and click <guibutton>OK</guibutton>. The options "
"will be displayed in the <interface>Message window</interface>."
msgstr ""

#: C/anjuta-manual.xml:898(para)
msgid ""
"There is no requirement to run <filename>configure</filename> only once. It "
"can be run at any time, usually when the configuration options need to be "
"changed. One thing to note is that, if the <filename>config.h</filename> "
"file in the top level directory is changed, running <filename>configure</"
"filename> again will not overwrite it."
msgstr ""

#: C/anjuta-manual.xml:906(title)
msgid "Auto generate"
msgstr ""

#: C/anjuta-manual.xml:907(para)
msgid ""
"Auto generation consists of two steps: running <application>automake</"
"application> and then running <application>autoconf</application>. If an "
"executable <filename>autogen.sh</filename> script is found in the top level "
"project directory, this file will be executed instead of the two steps. Like "
"<emphasis>configuration</emphasis>, auto generation is automatically handled "
"by the build process. It can also be run in cases where it is difficult to "
"configure the project (such as lots of errors reported due to mis-"
"synchronization after modifying lots of build files)."
msgstr ""

#: C/anjuta-manual.xml:918(title)
msgid "When to autogen.sh"
msgstr ""

#: C/anjuta-manual.xml:919(para)
msgid ""
"Unlike configuration, auto generation does not need to be run even once — in "
"fact, it does not need to be run at all! The option is available because it "
"can be handy in some circumstances."
msgstr ""

#: C/anjuta-manual.xml:925(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Auto generate</guimenuitem></menuchoice> to auto "
"generate the project."
msgstr ""

#: C/anjuta-manual.xml:929(para)
msgid ""
"Read the info pages of <ulink type=\"info\" url=\"info:automake"
"\"><application>automake</application></ulink> and <ulink type=\"info\" url="
"\"info:autoconf\"><application>autoconf</application></ulink> for more "
"details on how these tools work."
msgstr ""

#: C/anjuta-manual.xml:936(title)
msgid "Clean"
msgstr "Limpiar"

#: C/anjuta-manual.xml:937(para)
msgid ""
"This option cleans the project and leaves it in a state that requires "
"<guimenuitem>Build All</guimenuitem> to be performed. It deletes all of the "
"files generated by the build process, including all object files "
"(<filename>*.o</filename> files) and the executable(s) in the <filename "
"class=\"directory\">src</filename> directory (and other directories)."
msgstr ""

#: C/anjuta-manual.xml:944(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Clean</guimenuitem></menuchoice> to clean the "
"project."
msgstr ""

#: C/anjuta-manual.xml:950(title)
msgid "Clean All"
msgstr ""

#: C/anjuta-manual.xml:951(para)
msgid ""
"There is not a great deal to say about <guimenuitem>Clean All</guimenuitem> "
"(which might also be called <emphasis>Clean distribution</emphasis>, or "
"<emphasis>clean dist</emphasis> for short). It cleans the project and leaves "
"it in a state that requires <guimenuitem>Configure</guimenuitem> and "
"<guimenuitem>Build All</guimenuitem> to be performed. It deletes all of the "
"files generated by the build processes, including all the object files "
"(<filename>*.o</filename> files), executable(s) and Makefiles. In other "
"words, it leaves the project as though it has just been extracted from a "
"distribution tarball."
msgstr ""

#: C/anjuta-manual.xml:961(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Clean All</guimenuitem></menuchoice> to completely "
"clean the project."
msgstr ""

#: C/anjuta-manual.xml:968(title)
msgid "Executing program"
msgstr ""

#: C/anjuta-manual.xml:969(para)
msgid ""
"Once an executable is ready after the build, you can execute it by choosing "
"the menu item <menuchoice><guisubmenu>Build</"
"guisubmenu><guimenuitem>Execute</guimenuitem></menuchoice>, or pressing "
"<keycap>F3</keycap>. You can specify which executable you want to use in "
"case your project provides more than one and specify command line arguments."
msgstr ""

#: C/anjuta-manual.xml:976(title)
msgid "Dependencies"
msgstr "Dependencias"

#: C/anjuta-manual.xml:977(para)
msgid ""
"Unlike the build stage, execution doesn't check for dependencies (at least "
"for the time being). In other words, it does not check if the executable is "
"up-to-date before it executes the program. So, <emphasis>you must take care "
"of that yourself.</emphasis>"
msgstr ""

#: C/anjuta-manual.xml:987(title)
msgid "Choose executable and set program parameters"
msgstr "Elija el ejecutable y establezca los parámetros del programa"

#: C/anjuta-manual.xml:989(screeninfo)
msgid "Setting program parameters"
msgstr "Establecer los parámetros del programa"

#: C/anjuta-manual.xml:3(title)
msgid "Debugging"
msgstr "Depurar"

#: C/anjuta-manual.xml:5(emphasis)
msgid "To debug is human. To fix it is divine..."
msgstr "Depurar es de humanos, reparar es divino..."

#: C/anjuta-manual.xml:7(para)
msgid ""
"Well, the <emphasis>human</emphasis> part is what this section is about. The "
"<emphasis>divine</emphasis> part is up to you!"
msgstr ""

#: C/anjuta-manual.xml:11(para)
msgid ""
"When a program does not behave in the way it is supposed to, we say the "
"program contains a bug or bugs. This does not refer to compilation errors — "
"those are simply errors and they are relatively easy to clear, because the "
"compiler tells you where the problems are. On the other hand, "
"<emphasis>bugs</emphasis> are errors that happen during the execution of the "
"program and they can be hard (sometimes very hard!) to detect."
msgstr ""

#: C/anjuta-manual.xml:19(para)
msgid ""
"Any program that you think is bug-free is never completely bug-free. All we "
"can try to do is to reduce the number of bugs contained in the program. The "
"process of removing bugs is known as <emphasis>debugging</emphasis>, and the "
"tool that is used for debugging is called the <emphasis>debugger</emphasis>. "
"<application>Anjuta</application> provides a very user-friendly and powerful "
"debugging environment (actually, a GUI wrapper over <application>gdb</"
"application>, a powerful command line debugging tool and standard on Linux)."
msgstr ""

#: C/anjuta-manual.xml:27(para)
msgid ""
"A debugger tracks and traces the execution of the program and provides "
"various views of information needed to study the execution of the program."
msgstr ""

#: C/anjuta-manual.xml:33(para)
msgid ""
"The debugger has been heavily changed since anjuta 2.0.2. Some features have "
"been dropped but will be re enabled, a few have been added."
msgstr ""

#: C/anjuta-manual.xml:42(title)
msgid "Start and stop"
msgstr ""

#: C/anjuta-manual.xml:47(emphasis) C/anjuta-manual.xml:53(title)
msgid "Running an executable"
msgstr ""

#: C/anjuta-manual.xml:48(emphasis)
msgid "Attaching to a process"
msgstr ""

#: C/anjuta-manual.xml:44(para)
msgid ""
"The debugger is always started with a program loaded. There are two ways to "
"do this: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:59(listitem)
msgid "The program that you want to debug"
msgstr ""

#: C/anjuta-manual.xml:60(listitem)
msgid "The command line parameters"
msgstr ""

#: C/anjuta-manual.xml:61(listitem)
msgid "If you want a terminal or not (the Anjuta terminal plugin is used)"
msgstr ""

#: C/anjuta-manual.xml:62(listitem)
msgid "If you want to stop the program at the beginning or not"
msgstr ""

#: C/anjuta-manual.xml:54(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Run Target…</guimenuitem></menuchoice> to display a "
"dialog box where you can select: <placeholder-1/>"
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guimenuitem>Ejecutar objetivo…</guimenuitem></menuchoice> para mostrar "
"la una caja de diálogo donde puede seleccionar: <placeholder-1/>"

#: C/anjuta-manual.xml:65(para)
msgid ""
"The drop-down menu of the target drop-down combination box is already filled "
"with all executables of the current project. But you can select another "
"executable not part of the project. The debugger accepts libtool executable, "
"it means script,generated by libtool, wrapping the real executable. Note "
"that an URI is expected here, not a file path even if the debugger currently "
"supports only local files."
msgstr ""

#: C/anjuta-manual.xml:73(para)
msgid ""
"When you have set everything you can click on <guibutton>Execute</guibutton> "
"to start the debugger, load your program and stop at its beginning if "
"requested."
msgstr ""

#: C/anjuta-manual.xml:78(para)
msgid ""
"In order to better user the debugger, it is strongly recommended to debug "
"program with debugging information (-g for gcc) and no optimization (-O0 for "
"gcc)."
msgstr ""

#: C/anjuta-manual.xml:86(title)
msgid "Attaching to a Process"
msgstr ""

#: C/anjuta-manual.xml:87(para)
msgid ""
"It is also possible to attach to a running process and debugging it by "
"choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Attach to Process …</guimenuitem></menuchoice>. A "
"list of all the process running on the system will appear."
msgstr ""

#: C/anjuta-manual.xml:94(title) C/anjuta-manual.xml:96(screeninfo)
msgid "Attach to Process dialog"
msgstr ""

#: C/anjuta-manual.xml:100(para)
msgid ""
"Select the process to attach to and click <guibutton>OK</guibutton> to start "
"the debugger, attach to the selected process and stop it."
msgstr ""

#: C/anjuta-manual.xml:105(para)
msgid ""
"It is currently not possible to load symbol informations for the attached "
"process. They should be included in the process."
msgstr ""

#: C/anjuta-manual.xml:113(title)
msgid "Restarting an executable"
msgstr ""

#: C/anjuta-manual.xml:114(para)
msgid ""
"After running an executable at least one time, you can choose the menu item "
"<menuchoice><guisubmenu>Debug</guisubmenu><guimenuitem>Restart Target</"
"guimenuitem></menuchoice> to restart your program. It is just a shortcut "
"that will stop the debugger if it is currently running and restart it with "
"the last executable without displaying the start dialog."
msgstr ""

#: C/anjuta-manual.xml:124(title)
msgid "Stopping the Debugger"
msgstr ""

#: C/anjuta-manual.xml:125(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Stop Debugger</guimenuitem></menuchoice> to stop the "
"debugger. This option will kill the program which is being debugged. If the "
"debugger has been attached to a running process, it will just detach from it "
"without killing it. You will get a confirmation box if a program is "
"currently attached or running."
msgstr ""

#: C/anjuta-manual.xml:135(title)
msgid "Adding source directories"
msgstr ""

#: C/anjuta-manual.xml:136(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Add source paths…</guimenuitem></menuchoice> to "
"display a dialog box allowing you to add and remove source directories."
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guimenuitem>Añadir rutas de fuentes…</guimenuitem></menuchoice> para "
"mostrar una caja de diálogo que le permitirá añadir y quitar directorios de fuentes."

#: C/anjuta-manual.xml:141(para)
msgid ""
"Most executables include full file paths, so defining the directories where "
"are the source files is not useful. But some executables include only file "
"names without paths, in this case, the source files will be searched in all "
"these directories by the debugger. The directories order can be important if "
"several files have the same name, so you can change it using the "
"<guibutton>Up</guibutton> and <guibutton>Down</guibutton> buttons. The "
"directories list is send to the debugger when it is started. After changing "
"it, you need to restart the debugger to take it in account."
msgstr ""

#: C/anjuta-manual.xml:157(title)
msgid "Execution"
msgstr ""

#: C/anjuta-manual.xml:158(para)
msgid ""
"Execution of a program in the debugger can be finely controlled. The program "
"can be executed in single steps, or allowed to continue until it encounters "
"a breakpoint. Executing like this is essential for tracking program "
"behavior. Like a video editing session, the program can be executed in "
"<emphasis>slow motion</emphasis> with the ability to go forward, pause, "
"stop, and so on. You cannot go backward yet though."
msgstr ""

#: C/anjuta-manual.xml:165(para)
msgid ""
"The methods those can be used to execute a program in the debugger are "
"described in the next sections. These commands are available only when the "
"program is already started."
msgstr ""

#: C/anjuta-manual.xml:172(title)
msgid "Single stepping (step in)"
msgstr ""

#: C/anjuta-manual.xml:173(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Step In</guimenuitem></menuchoice> or click on the "
"<guibutton>Step In</guibutton> icon in the <interface>Debug toolbar</"
"interface> to step into a program."
msgstr ""

#: C/anjuta-manual.xml:179(para)
msgid ""
"Single stepping executes only one statement of the program (from the place "
"where it has stopped) and then returns control. If the statement that is "
"executed contains one or more functions, the debugger tries to step inside "
"the functions (in the sequence in which the functions are executed). Once "
"the statement is executed and control is passed back, it is possible to "
"study the various program parameters."
msgstr ""

#: C/anjuta-manual.xml:186(para)
msgid ""
"If the <interface>Disassembly window</interface> has the focus when this "
"command is selected, it executes only one assembler instruction."
msgstr ""

#: C/anjuta-manual.xml:193(title)
msgid "Single stepping (step over)"
msgstr ""

#: C/anjuta-manual.xml:194(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Step Over</guimenuitem></menuchoice> or click on the "
"<guibutton>Step Over</guibutton> icon in the <interface>Debug toolbar</"
"interface> to step over statements in a program."
msgstr ""

#: C/anjuta-manual.xml:200(para)
msgid ""
"<emphasis>Step over</emphasis> is similar to <emphasis>step in</emphasis>, "
"except that it does not step inside any function in the statement being "
"executed. The statement will be executed in one go."
msgstr ""

#: C/anjuta-manual.xml:205(para)
msgid ""
"If the <interface>Disassembly window</interface> has the focus when this "
"command is selected, it executes one assembler instruction but does not stop "
"inside if this instruction is a call to a subroutine."
msgstr ""

#: C/anjuta-manual.xml:211(para)
msgid ""
"If a dynamic library is loaded during the step, the program will not stop at "
"the end of the step. But it will run until it finds a breakpoint or you stop "
"it."
msgstr ""

#: C/anjuta-manual.xml:220(title)
msgid "Single stepping (step out)"
msgstr ""

#: C/anjuta-manual.xml:221(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Step Out</guimenuitem></menuchoice> or click on the "
"<guibutton>Step Out</guibutton> icon in the <interface>Debug toolbar</"
"interface> to step out in a program."
msgstr ""

#: C/anjuta-manual.xml:227(para)
msgid ""
"<emphasis>Step out</emphasis> will execute the current function until it "
"returns. The program will be stopped once it exits from the function. Step "
"out is not really single stepping, because it does not only execute a single "
"statement — it executes the whole function until that function returns to "
"the calling function."
msgstr ""

#: C/anjuta-manual.xml:237(title)
msgid "Run/Continue"
msgstr "Ejecutar/Seguir"

#: C/anjuta-manual.xml:238(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Run/Continue</guimenuitem></menuchoice> or click on "
"the <guibutton>Run/Continue</guibutton> icon in the <interface>Debug "
"toolbar</interface> to continue the execution of a program."
msgstr ""

#: C/anjuta-manual.xml:244(para)
msgid ""
"This option continues the execution of the program until a breakpoint is "
"encountered, or the program exits."
msgstr ""

#: C/anjuta-manual.xml:251(title)
msgid "Run To"
msgstr ""

#: C/anjuta-manual.xml:252(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Run to Cursor</guimenuitem></menuchoice> or click on "
"the <guibutton>Run to Cursor</guibutton> icon in the <interface>Debug "
"toolbar</interface> to run until the line at cursor is reached."
msgstr ""

#: C/anjuta-manual.xml:258(para)
msgid ""
"This option continues the execution of the program until the line or the "
"address (if the <interface>Disassembly window</interface> has the focus) "
"where the cursor is is reached."
msgstr ""

#: C/anjuta-manual.xml:266(title)
msgid "Stop Program"
msgstr ""

#: C/anjuta-manual.xml:267(para)
msgid ""
"While the program is running and has control, no debugging tasks can be "
"performed. To obtain control while the program is running, choose the menu "
"item <menuchoice><guisubmenu>Debug</guisubmenu><guimenuitem>Interrupt "
"Program</guimenuitem></menuchoice> or click on the <guibutton>Stop Program</"
"guibutton> icon in the <interface>Debug toolbar</interface>. This will "
"interrupt the program and return control to the debugger."
msgstr ""

#: C/anjuta-manual.xml:282(title)
msgid "Breakpoints"
msgstr "Puntos de parada"

#: C/anjuta-manual.xml:283(para)
msgid ""
"When debugging a program, it is useful to be able to stop the execution of "
"the program at a particular point, so that the state of the program can be "
"examined at that location. Breakpoints enable this to happen. Breakpoints "
"can be set at different locations in a source file and then the program is "
"allowed to run. When a breakpoint is encountered, the execution of the "
"program is suspended, enabling expressions to be evaluated, variables to be "
"inspected, the stack trace to be studied, and so on."
msgstr ""

#: C/anjuta-manual.xml:293(title)
msgid "Listing Breakpoints"
msgstr "Listar los puntos de parada"

#: C/anjuta-manual.xml:294(para)
msgid ""
"The <interface>Breakpoint list window</interface> can be opened by choosing "
"<menuchoice><guisubmenu>View</guisubmenu><guimenuitem>Breakpoints</"
"guimenuitem></menuchoice>"
msgstr ""

#: C/anjuta-manual.xml:301(title) C/anjuta-manual.xml:303(screeninfo)
msgid "Breakpoint view"
msgstr "Vista del punto de parada"

#: C/anjuta-manual.xml:312(term) C/anjuta-manual.xml:408(term)
msgid "Location"
msgstr "Ubicación"

#: C/anjuta-manual.xml:314(para)
msgid ""
"This is the position of the breakpoint in the source file. When the "
"breakpoint is set by the debugger, you can get additional information like "
"the function where is the breakpoint."
msgstr ""
"Esta es la posición del punto de parada en el archivo fuente. Cuando el "
"punto de parada lo establece el depurador, puede obtener información adicional tal como "
"la función donde está el punto de parada."

#: C/anjuta-manual.xml:322(term)
msgid "Address"
msgstr "Dirección"

#: C/anjuta-manual.xml:324(para)
msgid ""
"This field is filled with the address of the breakpoint when it is set by "
"the debugger."
msgstr ""
"Este campo está rellenado con la dirección del punto de parada cuando el depurador "
"lo establece."

#: C/anjuta-manual.xml:331(term)
msgid "Type"
msgstr "Tipo"

#: C/anjuta-manual.xml:333(para)
msgid ""
"This displays always \"breakpoint\". It will be used in a next version "
"supporting different kind of breakpoints."
msgstr ""
"Esto siempre muestra «punto de parada». Se usará en una versión posterior "
"soportando diferentes tipos de puntos de parada."

#: C/anjuta-manual.xml:340(term) C/anjuta-manual.xml:435(term)
msgid "Condition"
msgstr "Condición"

#: C/anjuta-manual.xml:342(para)
msgid "This is the breakpoint condition, it is empty if no condition is defined."
msgstr "Esta es la condición del punto de parada, está vacía si no se define ninguna condición."

#: C/anjuta-manual.xml:348(term)
msgid "Pass count"
msgstr "Conteo de pasadas"

#: C/anjuta-manual.xml:350(para)
msgid ""
"When the debugger is not running, this column displays the pass count of the "
"breakpoint, zero if it is not defined."
msgstr ""

#: C/anjuta-manual.xml:354(para)
msgid ""
"When the debugger is running, if pass count is zero, this column displays "
"the number of time this breakpoint has been triggered. If pass count is not "
"zero, both numbers are displayed. The pass count is the second number."
msgstr ""

#: C/anjuta-manual.xml:362(term)
msgid "State"
msgstr "Estado"

#: C/anjuta-manual.xml:367(para)
msgid "Pending: breakpoint is not set in your program."
msgstr ""

#: C/anjuta-manual.xml:368(para)
msgid "Permanent: breakpoint is set (id number in given inside the parenthesis)."
msgstr ""

#: C/anjuta-manual.xml:369(para)
msgid "Temporary: breakpoint is set but will be deleted if reached."
msgstr ""

#: C/anjuta-manual.xml:364(para)
msgid "This is the state of the breakpoint. You could have. <placeholder-1/>"
msgstr "Éste es el estado del punto de parada. Puede tener: <placeholder-1/>"

#: C/anjuta-manual.xml:308(para)
msgid "The view has the following columns: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:377(para)
msgid ""
"All breakpoints are kept across anjuta session even if they correspond to a "
"non existing place. In this case their state are set as pending.The "
"interface try to set them each time the program is started or a new dynamic "
"library is loaded."
msgstr ""

#: C/anjuta-manual.xml:386(title)
msgid "Adding or Setting Breakpoints"
msgstr "Añadir o establecer puntos de parada"

#: C/anjuta-manual.xml:387(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Add Breakpoint…</guimenuitem></menuchoice> or "
"<menuchoice><guimenuitem>Add Breakpoint…</guimenuitem></menuchoice> in the "
"breakpoint list popup menu to open the add breakpoint dialog."
msgstr ""

#: C/anjuta-manual.xml:395(title) C/anjuta-manual.xml:397(screeninfo)
msgid "Breakpoint add dialog"
msgstr "Diálogo de adición de punto de parada"

#: C/anjuta-manual.xml:415(para)
msgid "File_name:Line_number"
msgstr ""

#: C/anjuta-manual.xml:416(para)
msgid "Function_name"
msgstr ""

#: C/anjuta-manual.xml:417(para)
msgid "File:Function_name"
msgstr ""

#: C/anjuta-manual.xml:410(para)
msgid ""
"Enter the location at which to set the breakpoint. It has to be specified in "
"one of the following formats: <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:421(para)
msgid ""
"The first one is obvious — The location refers to the line number "
"<emphasis>Line_number</emphasis> in the source file <emphasis>File</"
"emphasis>. The second refers to the first line of the function "
"<emphasis>Function_name</emphasis>. The third is similar to the second, "
"except that this notation is used where there is more than one function with "
"the name <emphasis>Function_name</emphasis> in the program. It is possible "
"to differentiate between them by providing the <emphasis>File</emphasis>, so "
"the notation refers to the function <emphasis>Function_name</emphasis> in "
"the file <emphasis>File</emphasis>."
msgstr ""

#: C/anjuta-manual.xml:437(para)
msgid ""
"The <emphasis>Condition</emphasis> parameter displays a associated "
"expression which should evaluate to a Boolean value — that is, the "
"evaluation of the expression should result in either TRUE(1) or FALSE(0). If "
"the final evaluation value is not a Boolean value, then it will be "
"appropriately type casted to a Boolean."
msgstr ""

#: C/anjuta-manual.xml:444(para)
msgid ""
"Every time the breakpoint is encountered during the execution, the break "
"condition will be evaluated. The debugger will break the execution only if "
"the evaluation results in a TRUE value, otherwise it will continue the "
"execution as though there had been no breakpoint."
msgstr ""

#: C/anjuta-manual.xml:450(para)
msgid ""
"The default value, if you left this field blank, of <emphasis>Break "
"condition</emphasis> is TRUE. The debugger will always break the execution "
"at the breakpoint location."
msgstr ""
"El valor predeterminado, si dejó el campo vacío, de la <emphasis>Condición de parada</emphasis> es "
"siempre TRUE. El depurador parará la ejecución en la posición del punto de "
"parada."

#: C/anjuta-manual.xml:457(term)
msgid "Pass Count"
msgstr "Conteo de pasadas"

#: C/anjuta-manual.xml:459(para)
msgid ""
"The <emphasis>Pass count</emphasis> is an integer (unsigned) value which "
"tells the debugger to skip the breakpoint that number of times before it is "
"considered. <emphasis>Pass count</emphasis> has a higher priority than the "
"<emphasis>Break condition</emphasis>. Only when the <emphasis>Pass count</"
"emphasis> reaches zero will the debugger evaluate the <emphasis>Break "
"condition</emphasis> (if any condition is present). If there is no "
"condition, the debugger will break the execution once the <emphasis>Pass "
"count</emphasis> counts down to zero."
msgstr ""

#: C/anjuta-manual.xml:469(para)
msgid ""
"The default value, if you left this field blank, of the <emphasis>Pass "
"count</emphasis> is zero. The breakpoint will be considered when it is first "
"encountered."
msgstr ""
"El valor predeterminado, si dejó el campo vacío, del <emphasis>Conteo de pasadas<emphasis> es cero. "
"El punto de parada se considerará cuando se encuentre por primera vez."

#: C/anjuta-manual.xml:402(para)
msgid ""
"You need to enter the location and optionally, the break condition and the "
"pass count then click <guibutton>OK</guibutton> to set the breakpoint. "
"<placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:477(para)
msgid ""
"A breakpoint may also be set by selecting a line in the editor and choosing "
"the menu item <menuchoice><guisubmenu>Debug</guisubmenu><guimenuitem>Toggle "
"Breakpoint</guimenuitem></menuchoice> in the editor popup menu item or the "
"<guibutton>Toggle Breakpoint</guibutton> icon in the <interface>Debug "
"toolbar</interface>."
msgstr ""

#: C/anjuta-manual.xml:486(para)
msgid ""
"Breakpoints can be added even if the debugger is not started or in dynamic "
"library not loaded yet. But they cannot be added while a program is running "
"under control of the debugger."
msgstr ""

#: C/anjuta-manual.xml:495(title)
msgid "Editing Breakpoints"
msgstr "Editar puntos de parada"

#: C/anjuta-manual.xml:496(para)
msgid ""
"It is possible to change the condition and the pass count by selecting the "
"breakpoint in the breakpoint list and click in the popup menu item "
"<menuchoice><guimenuitem>Edit Breakpoint</guimenuitem></menuchoice>."
msgstr ""

#: C/anjuta-manual.xml:501(para)
msgid ""
"Edit the entries as required and click on <guibutton>OK</guibutton> to "
"commit the changes."
msgstr ""
"Edite las entradas como se requiere y pulse <guibutton>Aceptar</guibutton> "
"para efectuar los cambios."

#: C/anjuta-manual.xml:508(title)
msgid "Deleting Breakpoints"
msgstr "Borrar puntos de parada"

#: C/anjuta-manual.xml:509(para)
msgid ""
"Select the breakpoint in the breakpoint list view and click on "
"<menuchoice><guimenuitem>Remove Breakpoint</guimenuitem></menuchoice> to "
"delete it."
msgstr ""

#: C/anjuta-manual.xml:513(para)
msgid ""
"A existing breakpoint may also be deleted by selecting the line in the "
"editor and choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Toggle Breakpoint</guimenuitem></menuchoice>, the "
"editor popup menu item <menuchoice><guimenuitem>Toggle Breakpoint</"
"guimenuitem></menuchoice> or the <guibutton>Toggle Breakpoint</guibutton> "
"icon in the <interface>Debug toolbar</interface>."
msgstr ""

#: C/anjuta-manual.xml:522(para)
msgid ""
"It is possible to remove all breakpoints by clicking on "
"<menuchoice><guisubmenu>Debug</guisubmenu><guimenuitem>Remove All "
"Breakpoints</guimenuitem></menuchoice> or on <menuchoice><guimenuitem>Remove "
"All Breakpoints</guimenuitem></menuchoice> in the breakpoint list popup menu."
msgstr ""
"Es posible quitar todos los puntos de parada pulsando en "
"<menuchoice><guisubmenu>Depurar</guisubmenu><guimenuitem>Quitar todos los puntos de parada</"
"guimenuitem></menuchoice> o en <menuchoice><guimenuitem>Quitar "
"todos los puntos de parada</guimenuitem></menuchoice> en el menú emergente de lista de puntos de parada."

#: C/anjuta-manual.xml:531(title)
msgid "Enabling or Disabling Breakpoints"
msgstr ""

#: C/anjuta-manual.xml:532(para)
msgid ""
"Click on the Enable column of the <interface>Breakpoint list window</"
"interface> or in the menu item <menuchoice><guimenuitem>Enable Breakpoint</"
"guimenuitem></menuchoice> to enable or disable the selected breakpoint. The "
"breakpoint will be enabled or disabled, depending on its current state."
msgstr ""

#: C/anjuta-manual.xml:538(para)
msgid ""
"To disable all breakpoints, click on <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Disable All Breakpoints</guimenuitem></menuchoice> "
"or on <menuchoice><guimenuitem>Disable All Breakpoints</guimenuitem></"
"menuchoice> in the breakpoint list popup menu."
msgstr ""

#: C/anjuta-manual.xml:549(title)
msgid "Expressions"
msgstr ""

#: C/anjuta-manual.xml:552(title)
msgid "Listing local variable"
msgstr ""

#: C/anjuta-manual.xml:553(para)
msgid ""
"When a program is running under the control of the debugger, the "
"<interface>Locals list window</interface> can be opened by choosing "
"<menuchoice><guisubmenu>View</guisubmenu><guimenuitem>Locals</guimenuitem></"
"menuchoice>"
msgstr ""

#: C/anjuta-manual.xml:567(title) C/anjuta-manual.xml:569(screeninfo)
msgid "Local variables"
msgstr ""

#: C/anjuta-manual.xml:559(para)
msgid ""
"Local variables of the current frame (the current function in which the "
"program control is present) are displayed in the <interface>Locals list "
"window</interface>. During execution of the program (eg. during single "
"stepping), local variables will be updated. If any variable value was "
"changed in the last debugging step, its value will be highlight in red. The "
"variables are presented in a tree form for easy view. <placeholder-1/>"
msgstr ""

#: C/anjuta-manual.xml:574(para)
msgid ""
"The value of a local variable can be modified by selecting it and clicking "
"in the value column."
msgstr ""

#: C/anjuta-manual.xml:579(para)
msgid ""
"Gdb is more and more often used as a back end for a graphical front end. It "
"has been improved recently in this area. It is recommended to use the latest "
"version (6.6) of gdb. On older version, gdb can crash when the front end ask "
"for an pointer with an invalid (but not used) value."
msgstr ""

#: C/anjuta-manual.xml:589(title)
msgid "Listing watched expressions"
msgstr ""

#: C/anjuta-manual.xml:590(para)
msgid ""
"Inspecting or evaluating an expression provides the result only once. To "
"continuously monitor some variables or expressions, use <emphasis>expression "
"watch</emphasis>."
msgstr ""

#: C/anjuta-manual.xml:594(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>View</"
"guisubmenu><guimenuitem>Watch Window</guimenuitem></menuchoice> to display "
"the <interface>expression watch window</interface>."
msgstr ""

#: C/anjuta-manual.xml:601(title)
msgid "Adding an expression to watch"
msgstr ""

#: C/anjuta-manual.xml:602(para)
msgid ""
"Right-click on the <interface>expression watch window</interface> to open "
"the <interface>Operation menu</interface>. Choose the menu item "
"<guimenuitem>Add Watch…</guimenuitem>. Alternatively, you can use "
"<menuchoice><guisubmenu>Debug</guisubmenu><guimenuitem>Add Watch…</"
"guimenuitem></menuchoice> A dialog prompting for the expression will appear. "
"Enter the expression and click <guibutton>OK</guibutton>."
msgstr ""

#: C/anjuta-manual.xml:611(para)
msgid ""
"By default watch expression are updated automatically each time the program "
"is stopped. This can be changed in the add watch dialog or later using the "
"<guimenuitem>Automatic update</guimenuitem> menu item in the "
"<interface>expression watch window</interface> popup menu. A watched "
"expression can be update manually by choosing <guimenuitem>Update Watch</"
"guimenuitem> or <guimenuitem>Update All</guimenuitem> in the previous menu."
msgstr ""

#: C/anjuta-manual.xml:620(para)
msgid ""
"It is not necessary to have the debugger running to add a new watch "
"expression. If the debugger is not running or the corresponding expression "
"cannot be found, the front end will try to create the watch expression, each "
"time the program is stopped."
msgstr ""

#: C/anjuta-manual.xml:629(title)
msgid "Removing an expression from watch"
msgstr "Quitar una expresión de la vigilancia"

#: C/anjuta-manual.xml:630(para)
msgid ""
"Select the watch expression that you want to remove in the "
"<interface>expression watch window</interface>, then open the "
"<interface>Operation menu</interface>, clicking with the right mouse button, "
"and choose the menu item <guimenuitem>Remove</guimenuitem> to remove it."
msgstr ""

#: C/anjuta-manual.xml:636(para)
msgid ""
"All watch can be removed by choosing <guimenuitem>Remove All</guimenuitem> "
"in the popup menu of the <interface>expression watch window</interface>."
msgstr ""

#: C/anjuta-manual.xml:643(title)
msgid "Evaluating expressions"
msgstr "Evaluar expresiones"

#: C/anjuta-manual.xml:644(para)
msgid ""
"When control is returned from a program — possibly at a breakpoint — it is "
"possible to evaluate expressions or inspect the values of variables in the "
"program. Choose the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guimenuitem>Inspect/Evaluate …</guimenuitem></menuchoice>, "
"<menuchoice><guimenuitem>Inspect/Evaluate …</guimenuitem></menuchoice> in "
"the popup menu of the editor or click the <guibutton>Inspect</guibutton> "
"button on the <interface>Debug Toolbar</interface>."
msgstr ""

#: C/anjuta-manual.xml:653(para)
msgid "A window will appear showing the result of the evaluation."
msgstr ""

#: C/anjuta-manual.xml:656(para)
msgid ""
"If an expression is highlighted in the editor, it is already displayed else "
"the window is empty. In both cases, you an select a new expression by "
"clicking on the name column and writing the new expression."
msgstr ""

#: C/anjuta-manual.xml:661(para)
msgid ""
"The expression can be added directly in the list of watched expressions by "
"clicking on <guibutton>Add</guibutton> button."
msgstr ""

#: C/anjuta-manual.xml:668(title)
msgid "Inspecting expressions in editor window"
msgstr ""

#: C/anjuta-manual.xml:669(para)
msgid ""
"When the debugger is active with the program stopped, you can get the value "
"of an expression just by putting the pointer over it and stay here for a few "
"time. If the expression is already present in the local or watch window, its "
"value is displayed in a tool tips window."
msgstr ""

#: C/anjuta-manual.xml:675(para)
msgid ""
"It is currently working only for simple variable, not for structures or "
"arrays."
msgstr ""
"Actualmente sólo funciona para una variable simple, no para estructuras o "
"vectores («array»)."

#: C/anjuta-manual.xml:684(title)
msgid "Stack Trace"
msgstr "Traza de la pila"

#: C/anjuta-manual.xml:687(title)
msgid "Stack Window"
msgstr "Ventana de pila"

#: C/anjuta-manual.xml:688(para)
msgid ""
"The <interface>Stack trace window</interface> shows the contents of the "
"program stack. It lists all of the functions and their arguments in the "
"sequence they were called. There is also a number representing each call. "
"This number is called the <emphasis>Frame</emphasis>. Each call in the trace "
"exists in a different frame. This starts from frame 0 (the last function "
"called) and grows higher as the function nesting become deeper."
msgstr ""

#: C/anjuta-manual.xml:696(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>View</"
"guisubmenu><guimenuitem>Program Stack</guimenuitem></menuchoice>, to open "
"the stack trace for the program being debugged."
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Ver</"
"guisubmenu><guimenuitem>Pila del programa</guimenuitem></menuchoice> para "
"abrir la traza de la pila para el programa que se está depurando."

#: C/anjuta-manual.xml:703(title) C/anjuta-manual.xml:705(screeninfo)
msgid "Stack trace window"
msgstr "Ventana de la traza de la pila"

#: C/anjuta-manual.xml:710(para)
msgid ""
"A small arrow points to the currently selected frame in the stack trace. By "
"default, this will be frame 0, the last function called. All of the "
"evaluation and inspection of expressions or variables will be with reference "
"to this selected frame. The scope of the variables or expressions being "
"evaluated will be limited to the selected frame only. The same applies for "
"new expressions only in the watch."
msgstr ""
"Una pequeña flecha apunta al marco seleccionado actualmente en la traza de la pila. "
"De forma predeterminada, éste será el marco 0, la última función llamada. Toda "
"la evaluación e inspección de expresiones o variables se referenciará "
"a este marco. El rango de las variables o expresiones evaluadas "
"se limitará a las del marco seleccionado. Lo mismo se aplica para "
"expresiones nuevas sólo en la vigilancia."

#: C/anjuta-manual.xml:720(title)
msgid "Setting the current frame"
msgstr "Establecer el marco actual"

#: C/anjuta-manual.xml:721(para)
msgid ""
"Double-clicking on any frame in the stack trace set that frame as the "
"currently selected frame (the arrow will point to the frame, indicating that "
"it has been selected as the current frame). Alternatively, open the "
"<interface>Operation menu</interface> by right-clicking on the "
"<interface>Stack trace window</interface>, and choose the menu item "
"<guimenuitem>Set frame</guimenuitem> to set the frame."
msgstr ""
"Al pulsar dos veces sobre cualquier marco de traza la pila se establecerá "
"ese marco como el marco actualmente seleccionado (la flecha apuntará al marco, "
"indicando que se ha seleccionado como el marco actual). Alternativamente, "
"abra el <interface>menú de operaciones</interface> pulsando con el botón "
"derecho sobre la <interface>ventana de traza de la pila</interface> y elija "
"el elemento del menú <guimenuitem>Establecer marco</guimenuitem> para "
"establecer el marco."

#: C/anjuta-manual.xml:729(para)
msgid ""
"Changing the stack frame changes the <interface>Locals list window</"
"interface> content, but not the <interface>expression watch window</"
"interface> as each expression is evaluated in the frame used when it was "
"defined."
msgstr ""
"Cambiar el marco de la pila cambia el contenido de la <interface>ventana de lista de locales</"
"interface> pero no la <interface>ventana de vigilancia de expresión</interface> "
"ya que cada expresión se evalúa en el marco usado cuando se definió."

#: C/anjuta-manual.xml:739(title)
msgid "Thread"
msgstr "Hilos"

#: C/anjuta-manual.xml:742(title)
msgid "Thread Window"
msgstr "Ventana de hilos"

#: C/anjuta-manual.xml:743(para)
msgid ""
"The <interface>Thread window</interface> show all threads used by the "
"program and display the current thread. Choose the menu item "
"<menuchoice><guisubmenu>View</guisubmenu><guimenuitem>Thread</guimenuitem></"
"menuchoice>, to open this window."
msgstr ""
"La <interface>ventana de hilos</interface> muestra todos los hilos usados por "
"el programa y muestra el hilo actual. Para abrir esta ventana elija el elemento del menú "
"<menuchoice><guisubmenu>Ver</guisubmenu><guimenuitem>Hilo</guimenuitem></"
"menuchoice>."

#: C/anjuta-manual.xml:748(para)
msgid ""
"A small arrow points to the current thread. When the program is stopped, it "
"correspond to the thread which has been interrupted. Each thread has its own "
"stack frame,so changing the current thread change the current stack frame."
msgstr ""
"Una pequeña flecha apunta al hilo actual. Cuando el programa se para, corresponde "
"al hilo en el que se ha interrumpido. Cada hilo tiene su propio marco "
"de la pila, de tal forma que cambiar el hilo actual cambia el marco de la pila actual."

#: C/anjuta-manual.xml:757(title)
msgid "Setting the current thread"
msgstr "Establecer el hilo actual"

#: C/anjuta-manual.xml:758(para)
msgid ""
"Double-clicking on any thread in the thread list will set that thread as the "
"currently selected thread (the arrow will point to the thread, indicating "
"that it has been selected as the current thread). Alternatively, open the "
"<interface>Operation menu</interface> by right-clicking on the "
"<interface>Thread list window</interface>, and choose the menu item "
"<guimenuitem>Set current thread</guimenuitem> to set the thread."
msgstr ""
"Al pulsar dos veces sobre cualquier hilo en la lista de hilos se establecerá "
"ese hilo como el hilo actualmente seleccionado (la flecha apuntará al hilo, "
"indicando que se ha seleccionado como el hilo actual). Alternativamente, "
"abra el <interface>menú de operaciones</interface> pulsando con el botón "
"derecho sobre la <interface>ventana de la lista de hilos</interface> y elija "
"el elemento del menú <guimenuitem>Establecer hilo</guimenuitem> para "
"establecer el hilo."

#: C/anjuta-manual.xml:766(para)
msgid ""
"Changing the thread changes the value of CPU registers and the current stack "
"frame, so the <interface>Locals list window</interface> change too."
msgstr ""
"Al cambiar el hilo también cambiará el valor de los registros de la CPU y el "
"marco actual de la pila, de tal forma que la <interface>ventana de lista de "
"locales</interface> también cambiará."

#: C/anjuta-manual.xml:775(title)
msgid "CPU"
msgstr "CPU"

#: C/anjuta-manual.xml:778(title)
msgid "Register window"
msgstr "Ventana de registros"

#: C/anjuta-manual.xml:779(para)
msgid ""
"It is possible to examine the contents of the internal registers of the CPU "
"(microprocessor). Choose the menu item <menuchoice><guisubmenu>View</"
"guisubmenu><guimenuitem>Registers</guimenuitem></menuchoice>. A window "
"listing all of the available registers in the microprocessor and their "
"corresponding contents will appear."
msgstr ""
"Es posible examinar el contenido de los registros internos de la CPU "
"(microprocesador). Elija el elemento del menú <menuchoice><guisubmenu>Ver</"
"guisubmenu><guimenuitem>Registros</guimenuitem></menuchoice>. Aparecerá una "
"ventana listando todos los registros disponibles en el microprocesador y su "
"correspondiente contenido."

#: C/anjuta-manual.xml:786(para)
msgid ""
"If any register value was changed in the last debugging step, its value will "
"be highlight in red. It is possible to change one register value by "
"selecting it and clicking in the value column."
msgstr ""
"Si cualquier valor de un registro se cambió en el último paso de depuración, "
"su valor se resaltará en rojo. Es posible cambiar el valor de un registro "
"seleccionándolo y pulsando en la columna de valor."

#: C/anjuta-manual.xml:794(title)
msgid "Memory window"
msgstr "Ventana de memoria"

#: C/anjuta-manual.xml:795(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>View</"
"guisubmenu><guimenuitem>Memory </guimenuitem></menuchoice>, to open the "
"<interface>memory window</interface> for the program being debugged. This "
"window shows the contents of all memory."
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Ver</"
"guisubmenu><guimenuitem>Memoria</guimenuitem></menuchoice> para abrir la "
"<interface>ventana de memoria</interface> para el programa que se está "
"depurando. Esta ventana muestra el contenido de toda la memoria."

#: C/anjuta-manual.xml:800(para)
msgid ""
"The first is the memory address in hexadecimal, the second is the memory "
"content in hexadecimal too and the last column is the memory content in "
"ASCII."
msgstr ""
"Lo primero son las direcciones de memoria en hexadecimal, lo segundo es el "
"contenido de la memoria en hexadecimal y la última columna es el contenido "
"de la memoria en ASCII."

#: C/anjuta-manual.xml:804(para)
msgid ""
"The addressing space of even a 32 bits microprocessor is quite big(4 Giga "
"bytes), so it is very difficult to go to a particular address with the "
"scrollbar. But you can click on the right mouse button, get a new menu and "
"select <menuchoice><guimenuitem>Goto address</guimenuitem></menuchoice> to "
"get a small edit box where you can enter an address in hexadecimal."
msgstr ""
"Hasta el espacio de direccionamiento de un microprocesador de 32 bits es "
"bastante grande (4 Gigabytes) de tal forma que es bastante difícil ir a una "
"dirección en particular con la barra de desplazamiento. Pero puede pulsar "
"con el botón derecho del ratón, obtener un nuevo menú y seleccionar "
"<menuchoice><guimenuitem>Ir a la dirección</guimenuitem></menuchoice> para "
"obtener una pequeña caja de texto editable donde puede introducir una "
"dirección en hexadecimal."

#: C/anjuta-manual.xml:814(title)
msgid "Disassembly window"
msgstr "Ventaba de desensamblado"

#: C/anjuta-manual.xml:815(para)
msgid ""
"Choose the menu item <menuchoice><guisubmenu>View</"
"guisubmenu><guimenuitem>Disassembly </guimenuitem></menuchoice>, to open the "
"<interface>disassembly window</interface> for the program being debugged."
msgstr ""
"Elija el elemento del menú <menuchoice><guisubmenu>Ver</"
"guisubmenu><guimenuitem>Desensamblado</guimenuitem></menuchoice> para abrir "
"la <interface>ventana de desensamblado</interface> para el programa que se "
"está depurando."

#: C/anjuta-manual.xml:820(para)
msgid ""
"The first column is the address in hexadecimal. In the second column, you "
"can have a label starting at the beginning of the line and ended with a "
"colon or a assembler instruction starting after 4 space characters."
msgstr ""
"La primera columna es la dirección en hexadecimal. En la segunda columna "
"puede tener una etiqueta al comienzo de la línea que termina con un punto y "
"coma, o una instrucción en ensamblador que comienza tras 4 caracteres "
"espacio."

#: C/anjuta-manual.xml:825(para)
msgid ""
"Again, as the addressing space is very big, the scrollbar is quite useless. "
"You can click on the right mouse button, get a new menu and select "
"<menuchoice><guimenuitem>Goto address</guimenuitem></menuchoice> to get a "
"small edit box where you can enter an address in hexadecimal. The position "
"in the disassembly window will be changed to the program counter value when "
"the program is stopped."
msgstr ""
"De nuevo, ya que el espacio de direccionamiento es muy grande, la barra de "
"desplazamiento es bastante inútil. Puede pulsar con el botón derecho del "
"ratón, obtener un nuevo menú y seleccionar <menuchoice><guimenuitem>Ir a la "
"dirección</guimenuitem></menuchoice> para obtener una pequeña caja de texto "
"editable donde puede introducir una dirección en hexadecimal. La posición en "
"la ventana de desensamblado se cambiará al valor del contador del programa "
"cuando se pare el programa."

#: C/anjuta-manual.xml:838(title)
msgid "Others"
msgstr "Otros"

#: C/anjuta-manual.xml:840(para)
msgid ""
"There are a number of other debugger features used less frequently and not "
"very well integrated in the new front end but which are still working."
msgstr ""
"Existe cierto número de características del depurador que se no se usan tan "
"frecuentemente y no están muy bien integradas en el nuevo front-end pero se "
"está trabajando en ello."

#: C/anjuta-manual.xml:846(title)
msgid "Dynamically loaded Libraries"
msgstr "Bibliotecas cargadas dinámicamente"

#: C/anjuta-manual.xml:847(para)
msgid ""
"To obtain a list of the dynamic libraries used by the program, choose the "
"menu item <menuchoice><guisubmenu>Debug</guisubmenu><guisubmenu>Info</"
"guisubmenu><guimenuitem>Shared Libraries</guimenuitem></menuchoice>. This "
"will bring open a window which will list all the shared libraries the "
"program has loaded and their locations in the memory. It also shows whether "
"the symbol table is loaded or not (Yes/No)."
msgstr ""
"Para obtener una lista de las bibliotecas usadas dinámicamente por el "
"programa, elija el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guisubmenu>Información</guisubmenu><guimenuitem>Bibliotecas "
"compartidas</guimenuitem></menuchoice>. Esto abrirá una nueva ventana que "
"listará todas las bibliotecas compartidas que el programa ha cargado y sus "
"ubicaciones en la memoria. También muestra si la tabla de símbolos se ha "
"cargado o no (Sí/No)."

#: C/anjuta-manual.xml:857(title) C/anjuta-manual.xml:859(screeninfo)
msgid "Shared Libraries window"
msgstr "Ventana de bibliotecas compartidas."

#: C/anjuta-manual.xml:867(title)
msgid "Kernel Signals"
msgstr "Señales del núcleo"

#: C/anjuta-manual.xml:868(para)
msgid ""
"Kernel signals are a way of signaling between processes in Linux. The list "
"of signals available for a program can be displayed by choosing the menu "
"item <menuchoice><guisubmenu>Debug</guisubmenu><guisubmenu>Info</"
"guisubmenu><guimenuitem>Kernel Signals</guimenuitem></menuchoice>. A window "
"will open which lists all of the signals available in the system along with "
"a brief description of each signal."
msgstr ""
"Las señales del núcleo son una forma de señalizar procesos en Linux. La "
"lista de señales disponibles para un programa se puede mostrar eligiendo el "
"elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guisubmenu>Información<menuchoice><guisubmenu>Señales del "
"núcleo</guisubmenu><guisubmenu>. Se abrirá una ventana listando todas las "
"señales disponibles en el sistema junto con una breve descripción de cada "
"señal."

#: C/anjuta-manual.xml:877(title) C/anjuta-manual.xml:879(screeninfo)
msgid "Kernel Signals window"
msgstr "Ventana de señales del núcleo"

#: C/anjuta-manual.xml:884(para)
msgid "There are three columns which specify what to do when the signal is received:"
msgstr "Existen tres columnas que especifican qué hacer cuando se recibe una señal:"

#: C/anjuta-manual.xml:890(para)
msgid ""
"<emphasis>Stop</emphasis> — this tells the debugger whether to stop the "
"program execution (and return control) when the program receives this signal."
msgstr ""
"<emphasis>Parar</emphasis>; esto le dice al depurador si debe parar la "
"ejecución del programa (y devolver el control) cuando el programa recibe "
"esta señal."

#: C/anjuta-manual.xml:896(para)
msgid ""
"<emphasis>Print</emphasis> — this tells the debugger whether to display the "
"received signal."
msgstr ""
"<emphasis>Imprimir</emphasis>; esto de dice al depurador si debe mostrar la "
"señal recibida."

#: C/anjuta-manual.xml:901(para)
msgid ""
"<emphasis>Pass</emphasis> — this tells the debugger whether to pass the "
"signal to the program."
msgstr ""
"<emphasis>Pasar</emphasis>; esto le dice al depurador si debe pasar la señal "
"al programa."

#: C/anjuta-manual.xml:907(para)
msgid ""
"The popup menu that is displayed when you click on the right mouse button "
"has all its item disabled because the corresponding functions are not "
"implemented yet."
msgstr ""
"El menú emergente que se muestra al pulsar con el botón derecho del ratón "
"tiene todos sus elementos desactivados porque las funciones correspondientes "
"no están aún implementadas."

#: C/anjuta-manual.xml:916(title)
msgid "Information about used files"
msgstr "Información acerca de archivos usados"

#: C/anjuta-manual.xml:917(para)
msgid ""
"It is possible to get some information about the files used by the debugged "
"program. by choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guisubmenu>Information</guisubmenu><guimenuitem>Target files</"
"guimenuitem></menuchoice>. A window will open displaying all informations."
msgstr ""
"Es posible obtener alguna información acerca de los archivos usados por el "
"programa depurado, eligiendo el elemento del menú "
"<menuchoice><guisubmenu>Depurar</guisubmenu><guisubmenu>Información</"
"guisubmenu><guimenuitem>Información de archivos objetivo</guimenuitem></"
"menuchoice>. Se abrirá una ventana mostrando toda la información."

#: C/anjuta-manual.xml:926(title)
msgid "Information about debugged program"
msgstr "Información acerca del programa depurado"

#: C/anjuta-manual.xml:927(para)
msgid ""
"It is possible to get some information about the debugged program by "
"choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guisubmenu>Information</guisubmenu><guimenuitem>Program</"
"guimenuitem></menuchoice>. A window will open displaying all informations."
msgstr ""
"Es posible obtener alguna información acerca del programa depurado eligiendo "
"el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guisubmenu>Información</guisubmenu><guimenuitem>Programa</"
"guimenuitem></menuchoice>. Se abrirá una ventana mostrando toda la "
"información."

#: C/anjuta-manual.xml:936(title)
msgid "Information about kernel structure"
msgstr "Información acerca de la estructura del núcleo"

#: C/anjuta-manual.xml:937(para)
msgid ""
"It is possible to get some information kernel data on the current process by "
"choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guisubmenu>Information</guisubmenu><guimenuitem>Kernel user "
"struct</guimenuitem></menuchoice>. A window will open displaying all "
"informations."
msgstr ""
"Es posible obtener alguna información de los datos del núcleo acerca de los "
"procesos actuales eligiendo el elemento del menú "
"<menuchoice><guisubmenu>Depurar</guisubmenu><guisubmenu>Información</"
"guisubmenu><guimenuitem>Información del user struct del núcleo</"
"guimenuitem></menuchoice>. Se abrirá una ventana mostrando toda la "
"información."

#: C/anjuta-manual.xml:946(title)
msgid "Information about global variables"
msgstr "Información acerca de las variables globales"

#: C/anjuta-manual.xml:947(para)
msgid ""
"It is possible to list all global variables by choosing the menu item "
"<menuchoice><guisubmenu>Debug</guisubmenu><guisubmenu>Information</"
"guisubmenu><guimenuitem>Info Global Variable</guimenuitem></menuchoice>. A "
"window will open listing all global variables."
msgstr ""
"Es posible listar todas las variables globales eligiendo el elemento del "
"menú <menuchoice><guisubmenu>Depurar</guisubmenu><guisubmenu>Información</"
"guisubmenu><guimenuitem>Info variables globales</guimenuitem></menuchoice>. "
"Se abrirá una ventana listando todas las variables globales."

#: C/anjuta-manual.xml:956(title)
msgid "Information about the current frame"
msgstr "Información acerca del marco actual"

#: C/anjuta-manual.xml:957(para)
msgid ""
"It is possible to obtain information about the currently selected frame by "
"choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guisubmenu>Information</guisubmenu><guimenuitem>Info Current "
"Frame</guimenuitem></menuchoice>. A window will open describing the current "
"frame."
msgstr ""
"Es posible obtener información acerca del marco actualmente seleccionado "
"eligiendo el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guisubmenu>Información</guisubmenu><guimenuitem>Marco actual</"
"guimenuitem></menuchoice>. Se abrirá una ventana describiendo el marco "
"actual."

#: C/anjuta-manual.xml:966(title)
msgid "Information about the current function arguments"
msgstr "Información acerca de los argumentos actuales de la función"

#: C/anjuta-manual.xml:967(para)
msgid ""
"It is possible to obtain information about the arguments of the current "
"function by choosing the menu item <menuchoice><guisubmenu>Debug</"
"guisubmenu><guisubmenu>Information</guisubmenu><guimenuitem>Arguments</"
"guimenuitem></menuchoice>. A window will open describing the arguments."
msgstr ""
"Es posible obtener información acerca de los argumentos de la función actual "
"eligiendo el elemento del menú <menuchoice><guisubmenu>Depurar</"
"guisubmenu><guisubmenu>Información</guisubmenu><guimenuitem>Argumentos</"
"guimenuitem></menuchoice>. Se abrirá una ventana describiendo los argumentos."

#: C/anjuta-manual.xml:976(title)
msgid "User command"
msgstr "Comando de usuario"

#: C/anjuta-manual.xml:977(para)
msgid ""
"To send directly a command to the back end choose the menu item "
"<menuchoice><guimenu>Debug</guimenu><guimenuitem>Debugger command</"
"guimenuitem></menuchoice>. This will bring a small dialog where you can "
"enter commands that will be send to the debugger when you press "
"<keycap>Return</keycap>."
msgstr ""
"Para enviar directamente un comando al «backend» elija el elemento del menú "
"<menuchoice><guimenu>Depurar</guimenu><guimenuitem>Comando del depurador</"
"guimenuitem></menuchoice>. Se mostrará un pequeño diálogo donde podrá "
"introducir los comandos que se enviarán al depurador cuando pulse "
"<keycap>Intro</keycap>."

#: C/anjuta-manual.xml:985(para)
msgid ""
"The front end sends this command directly to the back end without doing any "
"check. By example if you set a breakpoint like this, it will not appear in "
"the <interface>breakpoint list window</interface>. It is better to avoid "
"using this command unless you know exactly what you are doing."
msgstr ""
"El «frontend» envía este comando directamente al «backend» sin ninguna "
"comprobación. Por ejemplo, si establece un punto de parada como este, no "
"aparecerá en la <interface>ventana de lista de puntos de parada</interface>. "
"Es mejor evitar el uso de este comando a no ser que sepa exactamente qué "
"está haciendo."

#: C/anjuta-manual.xml:3(title)
msgid "Preferences"
msgstr "Preferencias"

#: C/anjuta-manual.xml:4(para)
msgid ""
"Preferences are ways to customize <application>anjuta</application> to suit "
"your tastes. Activate <menuchoice><guimenu>Settings</"
"guimenu><guimenuitem>Preferences</guimenuitem></menuchoice> to bring up the "
"preferences dialog. If you want to reset the preferences to their default "
"values, it can be done from <menuchoice><guimenu>Settings</"
"guimenu><guimenuitem> Set Default Preferences</guimenuitem></menuchoice>. "
"Some are explained below."
msgstr ""
"Las preferencias siempre son personalizables para que <application>Anjuta</"
"application> se ajuste a sus gustos. Active <menuchoice><guimenu>Opciones</"
"guimenu><guimenuitem>Preferencias</guimenuitem></menuchoice> para mostrar el "
"diálogo de preferencias. Si quiere restablecer las preferencias a los "
"valores predeterminados, puede hacerlo desde <menuchoice><guimenu>Opciones</"
"guimenu><guimenuitem>Preferencias predeterminadas</guimenuitem></"
"menuchoice>. Algunas se explican debajo."

#: C/anjuta-manual.xml:11(title)
msgid "General"
msgstr "General"

#: C/anjuta-manual.xml:13(para)
msgid ""
"<emphasis>Project Directory</emphasis> is the path where you plan to put all "
"your projects. Application wizard creates new projects in this directory "
"only. The default project directory is ~/Projects and generally, this is "
"just fine for most people. Also, when Open project is activated, this is the "
"base directory where the file selectior will start."
msgstr ""
"<emphasis>Directorio del proyecto:</emphasis> Es la ruta donde planea poner "
"todos sus proyectos. El asistente de aplicación crea los nuevos proyectos "
"sólo en este directorio. El directorio de proyecto predeterminado es ~/"
"Projects y generalmente es suficiente para la mayoría de las personas. "
"Además, cuando Abrir proyecto está activado, es el directorio base donde el "
"selector de archivos comenzará."

#: C/anjuta-manual.xml:20(para)
msgid ""
"<emphasis>User Info:</emphasis> Provide your correct Name and Email address "
"here. They are not used to do software registration (pun), rather they are "
"used to create ChangeLog entries and other insert text bits."
msgstr ""
"<emphasis>Información del usuario:</emphasis> Proporciona su nombre y "
"dirección de correo electrónico. No se utilizan para registrar el software, "
"sino para crear entradas en el archivo ChangeLog e insertar otros bits de "
"texto."

#: C/anjuta-manual.xml:27(title)
msgid "File Manager"
msgstr "Gestor de archivos"

#: C/anjuta-manual.xml:29(para)
msgid ""
"<emphasis>Root directory if no project is open</emphasis> is the path where "
"the root of the file manager points to if no project is currently open."
msgstr ""
"<emphasis>Directorio raíz si no hay un proyecto abierto</emphasis> es la "
"ruta donde apunta la raíz del gestor de archivos si actualmente no hay "
"ningún proyecto abierto."

#: C/anjuta-manual.xml:34(para)
msgid ""
"<emphasis>File Filter:</emphasis> It is possible to filter out some file "
"from the file tree, for example hidden files or files that are ignored by "
"the version control system which usually means they are generated at build "
"time and should not be changed."
msgstr ""
"<emphasis>Filtro de archivos:</emphasis> Es posible filtrar algunos archivos "
"del árbol de archivos, por ejemplo los archivos ocultos o los archivos "
"ignorados por el sistema de control de versiones que generalmente significa "
"que se general durante la compilación y no se deberían cambiar."

#: C/anjuta-manual.xml:3(title)
msgid "User-defined Tools"
msgstr "Herramientas definidas por el usuario"

#: C/anjuta-manual.xml:7(para)
msgid ""
"Often, you'll find the inbuilt functionality provided by Anjuta to be "
"insufficient. In these cases, you might be tempted to either add the feature "
"yourself to the Anjuta codebase or submit a feature request to implement the "
"feature. However, both approaches are likely to be slow and problematic, "
"especially if your tool is a specialized one. In these circumstances, it is "
"advisable to use the Anjuta tools framework instead."
msgstr ""
"A menudo encontrará que las funcionalidades propias proporcionadas por "
"Anjuta son insuficientes. En estos casos, puede que esté tentado a añadir la "
"característica al código fuente de Anjuta usted mismo o enviar una petición "
"de implementación de característica. No obstante, ambos casos suelen ser "
"lentos y problemáticos, especialmente si su herramienta es especializada. "
"Bajo estas circunstancias, es mejor usar el entorno de trabajo de las "
"herramientas de Anjuta."

#: C/anjuta-manual.xml:16(para)
msgid ""
"Anjuta provides a powerful framework for defining user-defined tools for "
"extending it's functionality. Tools have access to almost all features of "
"the IDE through the use of variables. You can add tools under any menu item, "
"specify input, output and error redirection within the GUI framework and "
"supply command line parameters to the tool."
msgstr ""
"Anjuta proporciona un potente entorno de trabajo para definir herramientas "
"definidas por el usuario para extender su funcionalidad. Las herramientas "
"acceden a casi todas las características del EID a través del uso de "
"variables. Puede añadir herramientas bajo cualquier elemento del menú, "
"entradas específicas, salidas y redirecciones de errores dentro del entorno "
"de trabajo del IGU así como proporcionar parámetros de la línea de comandos "
"a la herramienta."

#: C/anjuta-manual.xml:24(para)
msgid "The tools plugin has to be enabled to use this feature!"
msgstr ""
"El complemento de herramientas debe estar activado para usar esta "
"característica."

#: C/anjuta-manual.xml:31(title)
msgid "Tools Examples"
msgstr "Ejemplos de herramientas"

#: C/anjuta-manual.xml:32(para)
msgid ""
"This is a simple example how to use the tools plugin to integrate the GNOME "
"ChangeLog generation script"
msgstr ""
"Este es un simple ejemplo de cómo usar el complemento de herramientas para "
"integrar el script generador de registro de cambios de GNOME."

#: C/anjuta-manual.xml:38(title) C/anjuta-manual.xml:40(screeninfo)
msgid "The tool editor"
msgstr "La herramienta de edición"

#: C/anjuta-manual.xml:2(title)
msgid "Authors"
msgstr "Autores"

#: C/anjuta-manual.xml:3(para)
msgid ""
"The <application>Anjuta</application> project was founded by Naba Kumar. "
"Please visit <ulink type=\"http\" url=\"http://anjuta.org?page=authors/"
"\">this online list</ulink> to know all Anjuta contributors."
msgstr ""
"Naba Kumar fundó el proyecto <application>Anjuta</application>. Visite "
"<ulink type=\"http\" url=\"http://anjuta.org?page=authors/\">esta lista en "
"línea</ulink> para conocer todos los contribuidores de Anjuta."

#: C/anjuta-manual.xml:10(para)
msgid ""
"For more information on <application>Anjuta</application>, please visit the "
"project website at <ulink type=\"http\" url=\"http://anjuta.org/\">http://"
"anjuta.org</ulink>. Bug reports should be made using the Bug Tracker at the "
"project development site <ulink type=\"http\" url=\"http://www.sourceforge."
"net/projects/anjuta\"> http://www.sourceforge.net/projects/anjuta</ulink>"
msgstr ""
"Para obtener más información acerca de <application>Anjuta</application>, "
"visite la página web del proyecto en <ulink type=\"http\" url=\"http://"
"anjuta.org/\">http://anjuta.orghttp://anjuta.org. Los informes de error se "
"deben rellenar usando Bug Tracker en la página web de desarrollo del "
"proyecto en <ulink type=\"http\" url=\"http://www.sourceforge.net/projects/"
"anjuta\"> http://www.sourceforge.net/projects/anjuta</ulink>."

#: C/anjuta-manual.xml:18(para)
msgid ""
"This manual was written by Naba Kumar and Andy Piper. Please send all "
"comments and suggestions regarding this manual to Anjuta Devel list "
"<email>anjuta-devel@list.sourceforge.net</email>. Comments may also be "
"submitted via the project trackers at SourceForge."
msgstr ""
"Naba Kumar y Andy Piper escribieron este manual. Envíe cualquier comentario "
"y sugerencia acerca de este manual a la lista de desarrollo de Anjuta "
"<email>anjuta-devel@list.sourceforge.net</email>. También se pueden enviar "
"comentarios a traes de la página del proyecto en SourceForge."

#: C/anjuta-manual.xml:2(title)
msgid "License"
msgstr "Licencia"

#: C/anjuta-manual.xml:3(para)
msgid ""
"This program is free software; you can redistribute it and/or modify it "
"under the terms of the <ulink type=\"ghelp\" url=\"gnome-help:gpl\">GNU "
"General Public License</ulink> as published by the Free Software Foundation; "
"either version 2 of the License, or (at your option) any later version."
msgstr ""
"Este programa es software libre; puede redistribuirlo y/o modificarlo bajo "
"los términos de la <ulink type=\"ghelp\" url=\"gnome-help:gpl\">Licencia "
"Pública General GNU</ulink> tal como la publica la Free Software Foundation; "
"tanto en la versión 2 de la Licencia, o (a su opción) cualquier otra versión "
"posterior."

#: C/anjuta-manual.xml:10(para)
msgid ""
"This program is distributed in the hope that it will be useful, but WITHOUT "
"ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or "
"FITNESS FOR A PARTICULAR PURPOSE. See the <citetitle>GNU General Public "
"License</citetitle> for more details."
msgstr ""
"Este programa se distribuye con la esperanza de que le sea útil, pero SIN "
"NINGUNA GARANTÍA; sin incluso la garantía implícita de MERCANTILIDAD o "
"IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la <citetitle>Licencia Pública "
"General GNU</citetitle> para más detalles."

#: C/anjuta-manual.xml:16(para)
msgid ""
"A copy of the <citetitle>GNU General Public License</citetitle> is included "
"as an appendix to the <citetitle>GNOME Users Guide</citetitle>. You may also "
"obtain a copy of the <citetitle>GNU General Public License</citetitle> from "
"the Free Software Foundation by visiting <ulink type=\"http\" url=\"http://"
"www.fsf.org\"> their Web site</ulink> or by writing to <address> Free "
"Software Foundation, Inc. <street>51 Franklin Street</street> Fifth Floor "
"<city>Boston</city>, <state>MA</state><postcode>02110-1301</"
"postcode><country>USA</country></address>"
msgstr ""
"Una copia de la <citetitle>Licencia Pública General GNU</citetitle> está "
"incluidacomo un apéndice de la <citetitle>Guía del usuario de GNOME</"
"citetitle>. También puede obtener una copia de la <citetitle>Licencia "
"Pública General GNU</citetitle> a través de la Free Software Foundation "
"visitando <ulink type=\"http\" url=\"http://www.fsf.org\">su página web</"
"ulink> o escribiendo a la <address> Free Software Foundation, Inc. "
"<street>51 Franklin Street</street> Fifth Floor <city>Boston</city>, "
"<state>MA</state><postcode>02110-1301</postcode><country>EE. UU.</country></"
"address>"

#. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2.
#: C/anjuta-manual.xml:0(None)
msgid "translator-credits"
msgstr "Jorge González <jorgegonz@svn.gnome.org>, 2007, 2008"