| blob | 7f5150fe38096e2bf7e8f8795382d63c90e68b30 |
1 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
2 # 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
3 #
4 # This file is free software; you can redistribute it and/or modify it
5 # under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 2 of the License, or
7 # (at your option) any later version.
8 #
9 # This program is distributed in the hope that it will be useful, but
10 # WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # General Public License for more details.
13 #
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 ##############################################################################
19 ### WARNING: this file contains embedded tabs. Do not run untabify on this file.
21 AC_INIT(move-if-change)
22 AC_PREREQ(2.13)
23 AC_CANONICAL_SYSTEM
24 AC_ARG_PROGRAM
26 sinclude(config/acx.m4)
28 ### we might need to use some other shell than /bin/sh for running subshells
29 ### If we are on Windows, search for the shell. This will permit people
30 ### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
31 ### without also having to set CONFIG_SHELL. This code will work when
32 ### using bash, which sets OSTYPE.
33 case "${OSTYPE}" in
34 *win32*)
35 if test x${CONFIG_SHELL} = x ; then
36 if test ! -f /bin/sh ; then
37 if test x${SHELL} != x && test -f ${SHELL} ; then
38 CONFIG_SHELL=${SHELL}
39 export CONFIG_SHELL
40 else
41 for prog in sh sh.exe bash bash.exe; do
42 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
43 for dir in $PATH; do
44 test -z "$dir" && dir=.
45 if test -f $dir/$prog; then
46 CONFIG_SHELL=$dir/$prog
47 export CONFIG_SHELL
48 break
49 fi
50 done
51 IFS="$save_ifs"
52 test -n "${CONFIG_SHELL}" && break
53 done
54 fi
55 fi
56 fi
57 ;;
58 esac
60 config_shell=${CONFIG_SHELL-/bin/sh}
62 progname=$0
63 # if PWD already has a value, it is probably wrong.
64 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
66 # Export original configure arguments for use by sub-configures.
67 TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
68 AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
70 moveifchange=${srcdir}/move-if-change
72 # Set srcdir to "." if that's what it is.
73 # This is important for multilib support.
74 pwd=`${PWDCMD-pwd}`
75 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
76 if test "${pwd}" = "${srcpwd}" ; then
77 srcdir=.
78 fi
80 topsrcdir=$srcpwd
82 extra_host_args=
83 # Define the trigger file to make sure configure will re-run whenever
84 # the gcc version number changes.
85 if test "${with_gcc_version_trigger+set}" = set ; then
86 gcc_version_trigger="$with_gcc_version_trigger"
87 gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
88 else
89 # If gcc's sources are available, define the trigger file.
90 if test -f ${topsrcdir}/gcc/version.c ; then
91 gcc_version_trigger=${topsrcdir}/gcc/version.c
92 gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
93 case "$ac_configure_args" in
94 *--with-gcc-version-trigger=$gcc_version_trigger* )
95 ;;
96 * )
97 # Add to all subconfigure arguments: build, host, and target.
98 ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
99 ;;
100 esac
101 fi
102 fi
104 ### To add a new directory to the tree, first choose whether it is a target
105 ### or a host dependent tool. Then put it into the appropriate list
106 ### (library or tools, host or target), doing a dependency sort.
108 # Subdirs will be configured in the order listed in build_configdirs,
109 # configdirs, or target_configdirs; see the serialization section below.
111 # Dependency sorting is only needed when *configuration* must be done in
112 # a particular order. In all cases a dependency should be specified in
113 # the Makefile, whether or not it's implicitly specified here.
115 # Double entries in build_configdirs, configdirs, or target_configdirs may
116 # cause circular dependencies and break everything horribly.
118 # these libraries are used by various programs built for the host environment
119 #
120 host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
122 # these tools are built for the host environment
123 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
124 # know that we are building the simulator.
125 # binutils, gas and ld appear in that order because it makes sense to run
126 # "make check" in that particular order.
127 host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
129 # libgcj represents the runtime libraries only used by gcj.
130 libgcj="target-libffi \
131 target-boehm-gc \
132 target-zlib \
133 target-qthreads \
134 target-libjava"
136 # these libraries are built for the target environment, and are built after
137 # the host libraries and the host tools (which may be a cross compiler)
138 #
139 target_libraries="target-libiberty \
140 target-libgloss \
141 target-newlib \
142 target-libstdc++-v3 \
143 target-libf2c \
144 ${libgcj} \
145 target-libobjc"
147 # these tools are built using the target libraries, and are intended to
148 # run only in the target environment
149 #
150 # note: any program that *uses* libraries that are in the "target_libraries"
151 # list belongs in this list. those programs are also very likely
152 # candidates for the "native_only" list which follows
153 #
154 target_tools="target-examples target-groff target-gperf target-rda"
156 ################################################################################
158 ## All tools belong in one of the four categories, and are assigned above
159 ## We assign ${configdirs} this way to remove all embedded newlines. This
160 ## is important because configure will choke if they ever get through.
161 ## ${configdirs} is directories we build using the host tools.
162 ## ${target_configdirs} is directories we build using the target tools.
163 #
164 configdirs=`echo ${host_libs} ${host_tools}`
165 target_configdirs=`echo ${target_libraries} ${target_tools}`
167 # Only make build modules if build != host.
168 # This should be done more generally, but at the moment it doesn't matter.
169 if test ${host_alias} != ${build_alias} ; then
170 # This is the only build module.
171 build_modules=libiberty
172 else
173 build_modules=
174 fi
177 ################################################################################
179 srcname="gnu development package"
181 # This gets set non-empty for some net releases of packages.
182 appdirs=""
184 # Define is_cross_compiler to save on calls to 'test'.
185 is_cross_compiler=
186 if test x"${host}" = x"${target}" ; then
187 is_cross_compiler=no
188 else
189 is_cross_compiler=yes
190 fi
192 # Find the build and target subdirs.
193 GCC_TOPLEV_SUBDIRS
195 if test ! -d ${target_subdir} ; then
196 if mkdir ${target_subdir} ; then true
197 else
198 echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
199 exit 1
200 fi
201 fi
203 if test x"${build_alias}" != x"${host}" ; then
204 if test ! -d ${build_subdir} ; then
205 if mkdir ${build_subdir} ; then true
206 else
207 echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
208 exit 1
209 fi
210 fi
211 fi
213 # Skipdirs are removed silently.
214 skipdirs=
215 # Noconfigdirs are removed loudly.
216 noconfigdirs=""
218 use_gnu_ld=
219 # Make sure we don't let GNU ld be added if we didn't want it.
220 if test x$with_gnu_ld = xno ; then
221 use_gnu_ld=no
222 noconfigdirs="$noconfigdirs ld"
223 fi
225 use_gnu_as=
226 # Make sure we don't let GNU as be added if we didn't want it.
227 if test x$with_gnu_as = xno ; then
228 use_gnu_as=no
229 noconfigdirs="$noconfigdirs gas"
230 fi
232 # some tools are so dependent upon X11 that if we're not building with X,
233 # it's not even worth trying to configure, much less build, that tool.
235 case ${with_x} in
236 yes | "") ;; # the default value for this tree is that X11 is available
237 no)
238 skipdirs="${skipdirs} tk tix itcl libgui"
239 # We won't be able to build gdbtk without X.
240 enable_gdbtk=no
241 ;;
242 *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
243 esac
245 # Some tools are only suitable for building in a "native" situation.
246 # Remove these if host!=target.
247 native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
249 # Similarly, some are only suitable for cross toolchains.
250 # Remove these if host=target.
251 cross_only="target-libgloss target-newlib target-opcodes"
253 case $is_cross_compiler in
254 no) skipdirs="${skipdirs} ${cross_only}" ;;
255 yes) skipdirs="${skipdirs} ${native_only}" ;;
256 esac
258 # If both --with-headers and --with-libs are specified, default to
259 # --without-newlib.
260 if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
261 if test x"${with_newlib}" = x ; then
262 with_newlib=no
263 fi
264 fi
266 # Recognize --with-newlib/--without-newlib.
267 case ${with_newlib} in
268 no) skipdirs="${skipdirs} target-newlib" ;;
269 yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
270 esac
272 # Configure extra directories which are host specific
274 case "${host}" in
275 *-cygwin*)
276 configdirs="$configdirs libtermcap" ;;
277 esac
279 # Remove more programs from consideration, based on the host or
280 # target this usually means that a port of the program doesn't
281 # exist yet.
283 case "${host}" in
284 hppa*64*-*-*)
285 noconfigdirs="$noconfigdirs byacc"
286 ;;
287 i[[3456789]]86-*-vsta)
288 noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
289 ;;
290 i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
291 noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
292 ;;
293 i[[3456789]]86-*-mingw32*)
294 # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
295 noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
296 ;;
297 i[[3456789]]86-*-beos*)
298 noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
299 ;;
300 *-*-cygwin*)
301 noconfigdirs="autoconf automake send-pr rcs guile perl"
302 ;;
303 *-*-netbsd*)
304 noconfigdirs="rcs"
305 ;;
306 ppc*-*-pe)
307 noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
308 ;;
309 powerpc-*-beos*)
310 noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
311 ;;
312 *-*-darwin*)
313 noconfigdirs="$noconfigdirs tk itcl tix libgui"
314 ;;
315 esac
317 # Save it here so that, even in case of --enable-libgcj, if the Java
318 # front-end isn't enabled, we still get libgcj disabled.
319 libgcj_saved=$libgcj
320 case $enable_libgcj in
321 yes)
322 # If we reset it here, it won't get added to noconfigdirs in the
323 # target-specific build rules, so it will be forcibly enabled
324 # (unless the Java language itself isn't enabled).
325 libgcj=
326 ;;
327 no)
328 # Make sure we get it printed in the list of not supported target libs.
329 noconfigdirs="$noconfigdirs ${libgcj}"
330 ;;
331 esac
333 case "${target}" in
334 *-*-chorusos)
335 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
336 ;;
337 *-*-darwin*)
338 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
339 noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
340 ;;
341 *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
342 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
343 ;;
344 *-*-kaos*)
345 # Remove unsupported stuff on all kaOS configurations.
346 skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
347 skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
348 skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
349 noconfigdirs="$noconfigdirs target-libgloss"
350 ;;
351 *-*-netbsd*)
352 # Skip some stuff on all NetBSD configurations.
353 noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
355 # Skip some stuff that's unsupported on some NetBSD configurations.
356 case "${target}" in
357 i*86-*-netbsdelf*) ;;
358 arm*-*-netbsdelf*) ;;
359 *)
360 noconfigdirs="$noconfigdirs ${libgcj}"
361 ;;
362 esac
363 ;;
364 *-*-netware)
365 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
366 ;;
367 *-*-rtems*)
368 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
369 case ${target} in
370 h8300*-*-* | h8500-*-*)
371 noconfigdirs="$noconfigdirs target-libf2c"
372 ;;
373 *) ;;
374 esac
375 ;;
376 *-*-vxworks*)
377 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
378 ;;
379 alpha*-dec-osf*)
380 # ld works, but does not support shared libraries.
381 # newlib is not 64 bit ready. I'm not sure about fileutils.
382 # gas doesn't generate exception information.
383 noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
384 ;;
385 alpha*-*-*vms*)
386 noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
387 ;;
388 alpha*-*-linux*)
389 # newlib is not 64 bit ready
390 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
391 ;;
392 alpha*-*-freebsd*)
393 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
394 ;;
395 alpha*-*-*)
396 # newlib is not 64 bit ready
397 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
398 ;;
399 am33_2.0-*-linux*)
400 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
401 ;;
402 sh-*-linux*)
403 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
404 ;;
405 sh*-*-pe|mips*-*-pe|*arm-wince-pe)
406 noconfigdirs="$noconfigdirs ${libgcj}"
407 noconfigdirs="$noconfigdirs target-examples"
408 noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
409 noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
410 noconfigdirs="$noconfigdirs expect dejagnu"
411 # the C++ libraries don't build on top of CE's C libraries
412 noconfigdirs="$noconfigdirs target-libstdc++-v3"
413 noconfigdirs="$noconfigdirs target-newlib"
414 case "${host}" in
415 *-*-cygwin*) ;; # keep gdb and readline
416 *) noconfigdirs="$noconfigdirs gdb readline"
417 ;;
418 esac
419 ;;
420 arc-*-*)
421 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
422 ;;
423 arm-*-coff | strongarm-*-coff | xscale-*-coff)
424 noconfigdirs="$noconfigdirs ${libgcj}"
425 ;;
426 arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
427 noconfigdirs="$noconfigdirs target-libffi target-qthreads"
428 ;;
429 arm-*-pe*)
430 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
431 ;;
432 arm-*-oabi*)
433 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
434 ;;
435 thumb-*-coff)
436 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
437 ;;
438 thumb-*-elf)
439 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
440 ;;
441 thumb-*-oabi)
442 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
443 ;;
444 thumb-*-pe)
445 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
446 ;;
447 arm-*-riscix*)
448 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
449 ;;
450 avr-*-*)
451 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
452 ;;
453 c4x-*-* | tic4x-*-*)
454 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
455 ;;
456 c54x*-*-* | tic54x-*-*)
457 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
458 ;;
459 cris-*-*)
460 noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
461 ;;
462 d10v-*-*)
463 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
464 ;;
465 d30v-*-*)
466 noconfigdirs="$noconfigdirs ${libgcj} gdb"
467 ;;
468 fr30-*-elf*)
469 noconfigdirs="$noconfigdirs ${libgcj} gdb"
470 ;;
471 frv-*-*)
472 noconfigdirs="$noconfigdirs ${libgcj}"
473 ;;
474 h8300*-*-*)
475 noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
476 ;;
477 h8500-*-*)
478 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
479 ;;
480 hppa*64*-*-linux* | parisc*64*-*-linux*)
481 # In this case, it's because the hppa64-linux target is for
482 # the kernel only at this point and has no libc, and thus no
483 # headers, crt*.o, etc., all of which are needed by these.
484 noconfigdirs="$noconfigdirs target-zlib"
485 ;;
486 hppa*-*-*elf* | \
487 parisc*-*-linux* | hppa*-*-linux* | \
488 hppa*-*-lites* | \
489 hppa*-*-openbsd* | \
490 hppa*64*-*-*)
491 noconfigdirs="$noconfigdirs ${libgcj}"
492 # Do configure ld/binutils/gas for this case.
493 ;;
494 hppa*-*-*)
495 # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
496 # build on HP-UX 10.20.
497 noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
498 ;;
499 i960-*-*)
500 noconfigdirs="$noconfigdirs ${libgcj} gdb"
501 ;;
502 ia64*-*-elf*)
503 # No gdb support yet.
504 noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
505 ;;
506 ia64*-**-hpux*)
507 # No gdb or ld support yet.
508 noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
509 ;;
510 i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
511 noconfigdirs="$noconfigdirs ${libgcj}"
512 ;;
513 i[[3456789]]86-*-freebsd*)
514 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
515 ;;
516 i[[3456789]]86-*-linux*)
517 # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
518 # not build java stuff by default.
519 case "${target}" in
520 *-*-*libc1*)
521 noconfigdirs="$noconfigdirs ${libgcj}";;
522 esac
524 # This section makes it possible to build newlib natively on linux.
525 # If we are using a cross compiler then don't configure newlib.
526 if test x${is_cross_compiler} != xno ; then
527 noconfigdirs="$noconfigdirs target-newlib"
528 fi
529 noconfigdirs="$noconfigdirs target-libgloss"
530 # If we are not using a cross compiler, do configure newlib.
531 # Note however, that newlib will only be configured in this situation
532 # if the --with-newlib option has been given, because otherwise
533 # 'target-newlib' will appear in skipdirs.
534 ;;
535 i[[3456789]]86-*-mingw32*)
536 target_configdirs="$target_configdirs target-mingw"
537 noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
539 # Can't build gdb for mingw32 if not native.
540 case "${host}" in
541 i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
542 *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
543 ;;
544 esac
545 ;;
546 *-*-cygwin*)
547 target_configdirs="$target_configdirs target-libtermcap target-winsup"
548 noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
549 # always build newlib.
550 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
552 # Can't build gdb for Cygwin if not native.
553 case "${host}" in
554 *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
555 *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
556 ;;
557 esac
558 ;;
559 i[[3456789]]86-*-pe)
560 noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
561 ;;
562 i[[3456789]]86-*-sco3.2v5*)
563 # The linker does not yet know about weak symbols in COFF,
564 # and is not configured to handle mixed ELF and COFF.
565 noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
566 ;;
567 i[[3456789]]86-*-sco*)
568 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
569 ;;
570 i[[3456789]]86-*-solaris2*)
571 noconfigdirs="$noconfigdirs target-libgloss"
572 ;;
573 i[[3456789]]86-*-sysv4*)
574 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
575 ;;
576 i[[3456789]]86-*-beos*)
577 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
578 ;;
579 m32r-*-*)
580 noconfigdirs="$noconfigdirs ${libgcj} gdb"
581 ;;
582 m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
583 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
584 ;;
585 m68k-*-elf*)
586 noconfigdirs="$noconfigdirs ${libgcj}"
587 ;;
588 m68k-*-coff*)
589 noconfigdirs="$noconfigdirs ${libgcj}"
590 ;;
591 mcore-*-pe*)
592 # The EPOC C++ environment does not support exceptions or rtti,
593 # and so building libstdc++-v3 tends not to always work.
594 noconfigdirs="$noconfigdirs target-libstdc++-v3"
595 ;;
596 mmix-*-*)
597 noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
598 ;;
599 mn10200-*-*)
600 noconfigdirs="$noconfigdirs ${libgcj}"
601 ;;
602 mn10300-*-*)
603 noconfigdirs="$noconfigdirs ${libgcj}"
604 ;;
605 powerpc-*-aix*)
606 # copied from rs6000-*-* entry
607 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
608 ;;
609 powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
610 target_configdirs="$target_configdirs target-winsup"
611 noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
612 # always build newlib.
613 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
614 ;;
615 # This is temporary until we can link against shared libraries
616 powerpcle-*-solaris*)
617 noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
618 ;;
619 powerpc-*-beos*)
620 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
621 ;;
622 powerpc-*-eabi)
623 noconfigdirs="$noconfigdirs ${libgcj}"
624 ;;
625 rs6000-*-lynxos*)
626 noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
627 ;;
628 rs6000-*-aix*)
629 noconfigdirs="$noconfigdirs gprof ${libgcj}"
630 ;;
631 rs6000-*-*)
632 noconfigdirs="$noconfigdirs gprof ${libgcj}"
633 ;;
634 m68k-apollo-*)
635 noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
636 ;;
637 mips*-*-irix5*)
638 # The GNU linker does not support shared libraries.
639 noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
640 ;;
641 mips*-*-irix6*)
642 # Linking libjava exceeds command-line length limits on at least
643 # IRIX 6.2, but not on IRIX 6.5.
644 # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
645 # <oldham@codesourcery.com>
646 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
647 ;;
648 mips*-dec-bsd*)
649 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
650 ;;
651 mips*-*-bsd*)
652 noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
653 ;;
654 mipstx39-*-*)
655 noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
656 ;;
657 mips*-*-linux*)
658 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
659 ;;
660 mips*-*-*)
661 noconfigdirs="$noconfigdirs gprof ${libgcj}"
662 ;;
663 romp-*-*)
664 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
665 ;;
666 sh-*-*)
667 case "${host}" in
668 i[[3456789]]86-*-vsta) ;; # don't add gprof back in
669 i[[3456789]]86-*-go32*) ;; # don't add gprof back in
670 i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
671 *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
672 esac
673 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
674 ;;
675 sh64-*-*)
676 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
677 ;;
678 sparc-*-elf*)
679 noconfigdirs="$noconfigdirs ${libgcj}"
680 ;;
681 sparc64-*-elf*)
682 noconfigdirs="$noconfigdirs ${libgcj}"
683 ;;
684 sparclite-*-*)
685 noconfigdirs="$noconfigdirs ${libgcj}"
686 ;;
687 sparc-*-sunos4*)
688 noconfigdirs="$noconfigdirs ${libgcj}"
689 if test x${is_cross_compiler} != xno ; then
690 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
691 else
692 use_gnu_ld=no
693 fi
694 ;;
695 sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
696 ;;
697 v810-*-*)
698 noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
699 ;;
700 v850-*-*)
701 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
702 ;;
703 v850e-*-*)
704 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
705 ;;
706 v850ea-*-*)
707 noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
708 ;;
709 vax-*-vms)
710 noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
711 ;;
712 vax-*-*)
713 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
714 ;;
715 xtensa-*-*)
716 noconfigdirs="$noconfigdirs ${libgcj}"
717 ;;
718 ip2k-*-*)
719 noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
720 ;;
721 *-*-linux*)
722 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
723 ;;
724 *-*-lynxos*)
725 noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
726 ;;
727 *-*-*)
728 noconfigdirs="$noconfigdirs ${libgcj}"
729 ;;
730 esac
732 # If we aren't building newlib, then don't build libgloss, since libgloss
733 # depends upon some newlib header files.
734 case "${noconfigdirs}" in
735 *target-libgloss*) ;;
736 *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
737 esac
739 # Figure out what language subdirectories are present.
740 # Look if the user specified --enable-languages="..."; if not, use
741 # the environment variable $LANGUAGES if defined. $LANGUAGES might
742 # go away some day.
743 # NB: embedded tabs in this IF block -- do not untabify
744 if test x"${enable_languages+set}" != xset; then
745 if test x"${LANGUAGES+set}" = xset; then
746 enable_languages="${LANGUAGES}"
747 echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
748 else
749 enable_languages=all
750 fi
751 else
752 if test x"${enable_languages}" = x ||
753 test x"${enable_languages}" = xyes;
754 then
755 echo configure.in: --enable-languages needs at least one language argument 1>&2
756 exit 1
757 fi
758 fi
759 enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
761 # First scan to see if an enabled language requires some other language.
762 # We assume that a given config-lang.in will list all the language
763 # front ends it requires, even if some are required indirectly.
764 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
765 case ${lang_frag} in
766 ..) ;;
767 # The odd quoting in the next line works around
768 # an apparent bug in bash 1.12 on linux.
769 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
770 *)
771 # From the config-lang.in, get $language, $lang_requires
772 language=
773 lang_requires=
774 . ${lang_frag}
775 for other in ${lang_requires} ; do
776 case ,${enable_languages}, in
777 *,$other,*) ;;
778 *,all,*) ;;
779 *,$language,*)
780 echo " \`$other' language required by \`$language'; enabling" 1>&2
781 enable_languages="${enable_languages},${other}"
782 ;;
783 esac
784 done
785 ;;
786 esac
787 done
789 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
790 case ${lang_frag} in
791 ..) ;;
792 # The odd quoting in the next line works around
793 # an apparent bug in bash 1.12 on linux.
794 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
795 *)
796 # From the config-lang.in, get $language, $target_libs,
797 # $lang_dirs, and $build_by_default
798 language=
799 target_libs=
800 lang_dirs=
801 build_by_default=
802 . ${lang_frag}
803 if test "x$language" = x ; then
804 echo "${lang_frag} doesn't set \$language." 1>&2
805 exit 1
806 fi
807 case ,${enable_languages}, in
808 *,${language},*)
809 # Language was explicitly selected; include it.
810 add_this_lang=yes
811 ;;
812 *,all,*)
813 # 'all' was selected; include 'default' languages.
814 case ${build_by_default} in
815 no) add_this_lang=no ;;
816 *) add_this_lang=yes ;;
817 esac
818 ;;
819 *) add_this_lang=no ;;
820 esac
821 case ${add_this_lang} in
822 no)
823 # Remove language-dependent dirs.
824 eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
825 ;;
826 esac
827 ;;
828 esac
829 done
831 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
832 # $target_configdirs.
833 # If we have the source for $noconfigdirs entries, add them to $notsupp.
835 notsupp=""
836 for dir in . $skipdirs $noconfigdirs ; do
837 dirname=`echo $dir | sed -e s/target-//g`
838 if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
839 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
840 if test -r $srcdir/$dirname/configure ; then
841 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
842 true
843 else
844 notsupp="$notsupp $dir"
845 fi
846 fi
847 fi
848 if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
849 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
850 if test -r $srcdir/$dirname/configure ; then
851 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
852 true
853 else
854 notsupp="$notsupp $dir"
855 fi
856 fi
857 fi
858 done
860 # Sometimes the tools are distributed with libiberty but with no other
861 # libraries. In that case, we don't want to build target-libiberty.
862 if test -n "${target_configdirs}" ; then
863 others=
864 for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
865 if test "$i" != "libiberty" ; then
866 if test -r $srcdir/$i/configure ; then
867 others=yes;
868 break;
869 fi
870 fi
871 done
872 if test -z "${others}" ; then
873 target_configdirs=
874 fi
875 fi
877 # Quietly strip out all directories which aren't configurable in this tree.
878 # This relies on all configurable subdirectories being autoconfiscated, which
879 # is now the case.
880 configdirs_all="$configdirs"
881 configdirs=
882 for i in ${configdirs_all} ; do
883 if test -f ${srcdir}/$i/configure ; then
884 configdirs="${configdirs} $i"
885 fi
886 done
887 target_configdirs_all="$target_configdirs"
888 target_configdirs=
889 for i in ${target_configdirs_all} ; do
890 j=`echo $i | sed -e s/target-//g`
891 if test -f ${srcdir}/$j/configure ; then
892 target_configdirs="${target_configdirs} $i"
893 fi
894 done
896 # Produce a warning message for the subdirs we can't configure.
897 # This isn't especially interesting in the Cygnus tree, but in the individual
898 # FSF releases, it's important to let people know when their machine isn't
899 # supported by the one or two programs in a package.
901 if test -n "${notsupp}" && test -z "${norecursion}" ; then
902 # If $appdirs is non-empty, at least one of those directories must still
903 # be configured, or we error out. (E.g., if the gas release supports a
904 # specified target in some subdirs but not the gas subdir, we shouldn't
905 # pretend that all is well.)
906 if test -n "$appdirs" ; then
907 for dir in $appdirs ; do
908 if test -r $dir/Makefile.in ; then
909 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
910 appdirs=""
911 break
912 fi
913 if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
914 appdirs=""
915 break
916 fi
917 fi
918 done
919 if test -n "$appdirs" ; then
920 echo "*** This configuration is not supported by this package." 1>&2
921 exit 1
922 fi
923 fi
924 # Okay, some application will build, or we don't care to check. Still
925 # notify of subdirs not getting built.
926 echo "*** This configuration is not supported in the following subdirectories:" 1>&2
927 echo " ${notsupp}" 1>&2
928 echo " (Any other directories should still work fine.)" 1>&2
929 fi
931 case "$host" in
932 *msdosdjgpp*)
933 enable_gdbtk=no ;;
934 esac
936 copy_dirs=
938 # Handle --with-headers=XXX. If the value is not "yes", the contents of
939 # the named directory are copied to $(tooldir)/sys-include.
940 if test x"${with_headers}" != x ; then
941 if test x${is_cross_compiler} = xno ; then
942 echo 1>&2 '***' --with-headers is only supported when cross compiling
943 exit 1
944 fi
945 if test x"${with_headers}" != xyes ; then
946 case "${exec_prefixoption}" in
947 "") x=${prefix} ;;
948 *) x=${exec_prefix} ;;
949 esac
950 copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
951 fi
952 fi
954 # Handle --with-libs=XXX. If the value is not "yes", the contents of
955 # the name directories are copied to $(tooldir)/lib. Multiple directories
956 # are permitted.
957 if test x"${with_libs}" != x ; then
958 if test x${is_cross_compiler} = xno ; then
959 echo 1>&2 '***' --with-libs is only supported when cross compiling
960 exit 1
961 fi
962 if test x"${with_libs}" != xyes ; then
963 # Copy the libraries in reverse order, so that files in the first named
964 # library override files in subsequent libraries.
965 case "${exec_prefixoption}" in
966 "") x=${prefix} ;;
967 *) x=${exec_prefix} ;;
968 esac
969 for l in ${with_libs}; do
970 copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
971 done
972 fi
973 fi
975 # Handle ${copy_dirs}
976 set fnord ${copy_dirs}
977 shift
978 while test $# != 0 ; do
979 if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
980 :
981 else
982 echo Copying $1 to $2
984 # Use the install script to create the directory and all required
985 # parent directories.
986 if test -d $2 ; then
987 :
988 else
989 echo >config.temp
990 ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
991 fi
993 # Copy the directory, assuming we have tar.
994 # FIXME: Should we use B in the second tar? Not all systems support it.
995 (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
997 # It is the responsibility of the user to correctly adjust all
998 # symlinks. If somebody can figure out how to handle them correctly
999 # here, feel free to add the code.
1001 echo $1 > $2/COPIED
1002 fi
1003 shift; shift
1004 done
1006 # Work in distributions that contain no compiler tools, like Autoconf.
1007 tentative_cc=""
1008 host_makefile_frag=/dev/null
1009 if test -d ${srcdir}/config ; then
1010 case "${host}" in
1011 m68k-hp-hpux*)
1012 # Avoid "too much defining" errors from HPUX compiler.
1013 tentative_cc="cc -Wp,-H256000"
1014 # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
1015 # If it's HP/UX ar, this should be harmless.
1016 RANLIB="ar ts"
1017 ;;
1018 m68k-apollo-sysv*)
1019 tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
1020 ;;
1021 m68k-apollo-bsd*)
1022 #None of the Apollo compilers can compile gas or binutils. The preprocessor
1023 # chokes on bfd, the compiler won't let you assign integers to enums, and
1024 # other problems. Defining CC to gcc is a questionable way to say "don't use
1025 # the apollo compiler" (the preferred version of GCC could be called cc,
1026 # or whatever), but I'm not sure leaving CC as cc is any better...
1027 #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
1028 # Used to have BISON=yacc.
1029 tentative_cc=gcc
1030 ;;
1031 m88k-dg-dgux*)
1032 tentative_cc="gcc -Wall -ansi -D__using_DGUX"
1033 ;;
1034 m88k-harris-cxux*)
1035 # Under CX/UX, we want to tell the compiler to use ANSI mode.
1036 tentative_cc="cc -Xa"
1037 host_makefile_frag="config/mh-cxux"
1038 ;;
1039 m88k-motorola-sysv*)
1040 ;;
1041 mips*-dec-ultrix*)
1042 tentative_cc="cc -Wf,-XNg1000"
1043 host_makefile_frag="config/mh-decstation"
1044 ;;
1045 mips*-nec-sysv4*)
1046 # The C compiler on NEC MIPS SVR4 needs bigger tables.
1047 tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
1048 host_makefile_frag="config/mh-necv4"
1049 ;;
1050 mips*-sgi-irix4*)
1051 # Tell compiler to use K&R C. We can't compile under the SGI Ansi
1052 # environment. Also bump switch table size so that cp-parse will
1053 # compile. Bump string length limit so linker builds.
1054 tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
1055 ;;
1056 mips*-*-sysv4*)
1057 host_makefile_frag="config/mh-sysv4"
1058 ;;
1059 mips*-*-sysv*)
1060 # This is for a MIPS running RISC/os 4.52C.
1062 # This is needed for GDB, but needs to be in the top-level make because
1063 # if a library is compiled with the bsd headers and gets linked with the
1064 # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
1065 # a different size).
1066 # ptrace(2) apparently has problems in the BSD environment. No workaround is
1067 # known except to select the sysv environment. Could we use /proc instead?
1068 # These "sysv environments" and "bsd environments" often end up being a pain.
1069 #
1070 # This is not part of CFLAGS because perhaps not all C compilers have this
1071 # option.
1072 tentative_cc="cc -systype sysv"
1073 ;;
1074 i370-ibm-opened*)
1075 tentative_cc="c89"
1076 ;;
1077 i[[3456789]]86-*-sysv5*)
1078 host_makefile_frag="config/mh-sysv5"
1079 ;;
1080 i[[3456789]]86-*-dgux*)
1081 tentative_cc="gcc -Wall -ansi -D__using_DGUX"
1082 host_makefile_frag="config/mh-dgux386"
1083 ;;
1084 i[[3456789]]86-ncr-sysv4.3*)
1085 # The MetaWare compiler will generate a copyright message unless you
1086 # turn it off by adding the -Hnocopyr flag.
1087 tentative_cc="cc -Hnocopyr"
1088 ;;
1089 i[[3456789]]86-ncr-sysv4*)
1090 # for an NCR 3000 (i486/SVR4) system.
1091 # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
1092 # This compiler not only emits obnoxious copyright messages every time
1093 # you run it, but it chokes and dies on a whole bunch of GNU source
1094 # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
1095 tentative_cc="/usr/ccs/ATT/cc"
1096 host_makefile_frag="config/mh-ncr3000"
1097 ;;
1098 i[[3456789]]86-*-sco3.2v5*)
1099 ;;
1100 i[[3456789]]86-*-sco*)
1101 # The native C compiler botches some simple uses of const. Unfortunately,
1102 # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
1103 tentative_cc="cc -Dconst="
1104 host_makefile_frag="config/mh-sco"
1105 ;;
1106 i[[3456789]]86-*-udk*)
1107 host_makefile_frag="config/mh-sysv5"
1108 ;;
1109 i[[3456789]]86-*-solaris2*)
1110 host_makefile_frag="config/mh-sysv4"
1111 ;;
1112 i[[3456789]]86-*-msdosdjgpp*)
1113 host_makefile_frag="config/mh-djgpp"
1114 ;;
1115 *-cygwin*)
1116 host_makefile_frag="config/mh-cygwin"
1117 ;;
1118 *-mingw32*)
1119 host_makefile_frag="config/mh-mingw32"
1120 ;;
1121 *-interix*)
1122 host_makefile_frag="config/mh-interix"
1123 ;;
1124 vax-*-ultrix2*)
1125 # The old BSD pcc isn't up to compiling parts of gdb so use gcc
1126 tentative_cc=gcc
1127 ;;
1128 *-*-solaris2*)
1129 host_makefile_frag="config/mh-solaris"
1130 ;;
1131 m68k-sun-sunos*)
1132 # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
1133 # without overflowing the jump tables (-J says to use a 32 bit table)
1134 tentative_cc="cc -J"
1135 ;;
1136 *-hp-hpux*)
1137 tentative_cc="cc -Wp,-H256000"
1138 ;;
1139 *-*-hiux*)
1140 tentative_cc="cc -Wp,-H256000"
1141 ;;
1142 rs6000-*-lynxos*)
1143 # /bin/cc is less than useful for our purposes. Always use GCC
1144 tentative_cc="/usr/cygnus/progressive/bin/gcc"
1145 host_makefile_frag="config/mh-lynxrs6k"
1146 ;;
1147 *-*-lynxos*)
1148 # /bin/cc is less than useful for our purposes. Always use GCC
1149 tentative_cc="/bin/gcc"
1150 ;;
1151 *-*-sysv4*)
1152 host_makefile_frag="config/mh-sysv4"
1153 ;;
1154 esac
1155 fi
1157 extra_arflags_for_target=
1158 extra_nmflags_for_target=
1159 extra_ranlibflags_for_target=
1160 target_makefile_frag=/dev/null
1161 case "${target}" in
1162 i[[3456789]]86-*-netware*)
1163 target_makefile_frag="config/mt-netware"
1164 ;;
1165 powerpc-*-netware*)
1166 target_makefile_frag="config/mt-netware"
1167 ;;
1168 *-*-linux*)
1169 target_makefile_frag="config/mt-linux"
1170 ;;
1171 *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
1172 # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
1173 # commands to handle both 32-bit and 64-bit objects. These flags are
1174 # harmless if we're using GNU nm or ar.
1175 extra_arflags_for_target=" -X32_64"
1176 extra_nmflags_for_target=" -B -X32_64"
1177 ;;
1178 *-*-darwin*)
1179 # ranlib from Darwin requires the -c flag to look at common symbols.
1180 extra_ranlibflags_for_target=" -c"
1181 ;;
1182 mips*-*-pe | sh*-*-pe | *arm-wince-pe)
1183 target_makefile_frag="config/mt-wince"
1184 ;;
1185 esac
1187 alphaieee_frag=/dev/null
1188 case $target in
1189 alpha*-*-*)
1190 # This just makes sure to use the -mieee option to build target libs.
1191 # This should probably be set individually by each library.
1192 alphaieee_frag="config/mt-alphaieee"
1193 ;;
1194 esac
1196 # If --enable-target-optspace always use -Os instead of -O2 to build
1197 # the target libraries, similarly if it is not specified, use -Os
1198 # on selected platforms.
1199 ospace_frag=/dev/null
1200 case "${enable_target_optspace}:${target}" in
1201 yes:*)
1202 ospace_frag="config/mt-ospace"
1203 ;;
1204 :d30v-*)
1205 ospace_frag="config/mt-d30v"
1206 ;;
1207 :m32r-* | :d10v-* | :fr30-*)
1208 ospace_frag="config/mt-ospace"
1209 ;;
1210 no:* | :*)
1211 ;;
1212 *)
1213 echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
1214 ;;
1215 esac
1217 # Set with_gnu_as and with_gnu_ld as appropriate.
1218 #
1219 # This is done by determining whether or not the appropriate directory
1220 # is available, and by checking whether or not specific configurations
1221 # have requested that this magic not happen.
1222 #
1223 # The command line options always override the explicit settings in
1224 # configure.in, and the settings in configure.in override this magic.
1225 #
1226 # If the default for a toolchain is to use GNU as and ld, and you don't
1227 # want to do that, then you should use the --without-gnu-as and
1228 # --without-gnu-ld options for the configure script.
1230 if test x${use_gnu_as} = x &&
1231 echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
1232 with_gnu_as=yes
1233 extra_host_args="$extra_host_args --with-gnu-as"
1234 fi
1236 if test x${use_gnu_ld} = x &&
1237 echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
1238 with_gnu_ld=yes
1239 extra_host_args="$extra_host_args --with-gnu-ld"
1240 fi
1242 # If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
1243 # can detect this case.
1245 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
1246 with_newlib=yes
1247 extra_host_args="$extra_host_args --with-newlib"
1248 fi
1251 # Default to using --with-stabs for certain targets.
1252 if test x${with_stabs} = x ; then
1253 case "${target}" in
1254 mips*-*-irix6*)
1255 ;;
1256 mips*-*-* | alpha*-*-osf*)
1257 with_stabs=yes;
1258 extra_host_args="${extra_host_args} --with-stabs"
1259 ;;
1260 esac
1261 fi
1263 # hpux11 in 64bit mode has libraries in a weird place. Arrange to find
1264 # them automatically.
1265 case "${host}" in
1266 hppa*64*-*-hpux11*)
1267 extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
1268 ;;
1269 esac
1271 # If we aren't going to be using gcc, see if we can extract a definition
1272 # of CC from the fragment.
1273 # Actually, use the 'pre-extracted' version above.
1274 if test -z "${CC}" && test "${build}" = "${host}" ; then
1275 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1276 found=
1277 for dir in $PATH; do
1278 test -z "$dir" && dir=.
1279 if test -f $dir/gcc; then
1280 found=yes
1281 break
1282 fi
1283 done
1284 IFS="$save_ifs"
1285 if test -z "${found}" && test -n "${tentative_cc}" ; then
1286 CC=$tentative_cc
1287 fi
1288 fi
1290 # Some systems (e.g., one of the i386-aix systems the gas testers are
1291 # using) don't handle "\$" correctly, so don't use it here.
1292 tooldir='${exec_prefix}'/${target_alias}
1293 build_tooldir=${tooldir}
1295 # Generate a default definition for YACC. This is used if the makefile can't
1296 # locate bison or byacc in objdir.
1298 for prog in 'bison -y' byacc yacc
1299 do
1300 set dummy $prog; tmp=$2
1301 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1302 for dir in $PATH; do
1303 test -z "$dir" && dir=.
1304 if test -f $dir/$tmp; then
1305 DEFAULT_YACC="$prog"
1306 break
1307 fi
1308 done
1309 IFS="$save_ifs"
1311 test -n "$DEFAULT_YACC" && break
1312 done
1314 # Generate a default definition for M4. This is used if the makefile can't
1315 # locate m4 in objdir.
1317 for prog in gm4 gnum4 m4
1318 do
1319 set dummy $prog; tmp=$2
1320 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1321 for dir in $PATH; do
1322 test -z "$dir" && dir=.
1323 if test -f $dir/$tmp; then
1324 DEFAULT_M4="$prog"
1325 break
1326 fi
1327 done
1328 IFS="$save_ifs"
1330 test -n "$DEFAULT_M4" && break
1331 done
1333 # Generate a default definition for LEX. This is used if the makefile can't
1334 # locate flex in objdir.
1336 for prog in flex lex
1337 do
1338 set dummy $prog; tmp=$2
1339 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1340 for dir in $PATH; do
1341 test -z "$dir" && dir=.
1342 if test -f $dir/$tmp; then
1343 DEFAULT_LEX="$prog"
1344 break
1345 fi
1346 done
1347 IFS="$save_ifs"
1349 test -n "$DEFAULT_LEX" && break
1350 done
1352 if test "${build}" != "${host}" ; then
1353 # If we are doing a Canadian Cross, in which the host and build systems
1354 # are not the same, we set reasonable default values for the tools.
1356 BISON=${BISON-bison}
1357 CC=${CC-${host_alias}-gcc}
1358 CFLAGS=${CFLAGS-"-g -O2"}
1359 CXX=${CXX-${host_alias}-c++}
1360 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1361 CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
1362 CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
1363 CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
1364 GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
1365 GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
1366 BUILD_PREFIX=${build_alias}-
1367 BUILD_PREFIX_1=${build_alias}-
1368 MAKEINFO=${MAKEINFO-makeinfo}
1370 if test -z "${YACC}" ; then
1371 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1372 for dir in $PATH; do
1373 test -z "$dir" && dir=.
1374 if test -f $dir/bison; then
1375 YACC="bison -y"
1376 break
1377 fi
1378 if test -f $dir/byacc; then
1379 YACC=byacc
1380 break
1381 fi
1382 if test -f $dir/yacc; then
1383 YACC=yacc
1384 break
1385 fi
1386 done
1387 IFS="$save_ifs"
1388 if test -z "${YACC}" ; then
1389 YACC="bison -y"
1390 fi
1391 fi
1393 if test -z "${LEX}" ; then
1394 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1395 for dir in $PATH; do
1396 test -z "$dir" && dir=.
1397 if test -f $dir/flex; then
1398 LEX=flex
1399 break
1400 fi
1401 if test -f $dir/lex; then
1402 LEX=lex
1403 break
1404 fi
1405 done
1406 IFS="$save_ifs"
1407 LEX=${LEX-flex}
1408 fi
1410 else
1411 # Set reasonable default values for some tools even if not Canadian.
1412 # Of course, these are different reasonable default values, originally
1413 # specified directly in the Makefile.
1414 # We don't export, so that autoconf can do its job.
1415 # Note that all these settings are above the fragment inclusion point
1416 # in Makefile.in, so can still be overridden by fragments.
1417 # This is all going to change when we autoconfiscate...
1419 BISON="\$(USUAL_BISON)"
1420 CC_FOR_BUILD="\$(CC)"
1421 GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
1422 BUILD_PREFIX=
1423 BUILD_PREFIX_1=loser-
1424 MAKEINFO="\$(USUAL_MAKEINFO)"
1425 LEX="\$(USUAL_LEX)"
1426 YACC="\$(USUAL_YACC)"
1428 # If CC is still not set, try to get gcc.
1429 cc_prog_is_gcc=
1430 if test -z "${CC}" ; then
1431 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
1432 for dir in $PATH; do
1433 test -z "$dir" && dir=.
1434 if test -f $dir/gcc; then
1435 CC="gcc"
1436 cc_prog_is_gcc=yes
1437 echo 'void f(){}' > conftest.c
1438 if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1439 CFLAGS=${CFLAGS-"-g -O2"}
1440 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1441 else
1442 CFLAGS=${CFLAGS-"-O2"}
1443 CXXFLAGS=${CXXFLAGS-"-O2"}
1444 fi
1445 rm -f conftest*
1446 break
1447 fi
1448 done
1449 IFS="$save_ifs"
1450 CC=${CC-cc}
1451 else
1452 # Determine if we are using gcc.
1453 cat > conftest.c <<EOF
1454 #ifdef __GNUC__
1455 yes;
1456 #endif
1457 EOF
1458 if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
1459 cc_prog_is_gcc=yes
1460 fi
1461 rm -f conftest.c
1462 if test -z "${CFLAGS}"; then
1463 # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
1464 # is set to a version of gcc.
1465 if test "$cc_prog_is_gcc" = yes; then
1466 echo 'void f(){}' > conftest.c
1467 if test -z "`${CC} -g -c conftest.c 2>&1`"; then
1468 CFLAGS=${CFLAGS-"-g -O2"}
1469 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1470 else
1471 CFLAGS=${CFLAGS-"-O2"}
1472 CXXFLAGS=${CXXFLAGS-"-O2"}
1473 fi
1474 rm -f conftest*
1475 fi
1476 fi
1477 fi
1479 # We must set the default linker to the linker used by gcc for the correct
1480 # operation of libtool. If LD is not defined and we are using gcc, try to
1481 # set the LD default to the ld used by gcc.
1482 if test -z "$LD"; then
1483 if test "$cc_prog_is_gcc" = yes; then
1484 case $build in
1485 *-*-mingw*)
1486 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
1487 *)
1488 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
1489 esac
1490 case $gcc_prog_ld in
1491 # Accept absolute paths.
1492 [[\\/]* | [A-Za-z]:[\\/]*)]
1493 LD="$gcc_prog_ld" ;;
1494 esac
1495 fi
1496 fi
1498 CXX=${CXX-"c++"}
1499 CFLAGS=${CFLAGS-"-g"}
1500 CXXFLAGS=${CXXFLAGS-"-g -O2"}
1501 fi
1503 # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
1504 # Set up the list of links to be made.
1505 # ${links} is the list of link names, and ${files} is the list of names to link to.
1507 # Make the links.
1508 configlinks="${links}"
1509 if test -r ./config.status ; then
1510 mv -f ./config.status ./config.back
1511 fi
1512 while test -n "${files}" ; do
1513 # set file to car of files, files to cdr of files
1514 set ${files}; file=$1; shift; files=$*
1515 set ${links}; link=$1; shift; links=$*
1517 if test ! -r ${srcdir}/${file} ; then
1518 if test ! -r ${file} ; then
1519 echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
1520 echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
1521 exit 1
1522 else
1523 srcfile=${file}
1524 fi
1525 else
1526 srcfile=${srcdir}/${file}
1527 fi
1529 ${remove} -f ${link}
1530 # Make a symlink if possible, otherwise try a hard link
1531 if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
1532 true
1533 else
1534 # We need to re-remove the file because Lynx leaves a
1535 # very strange directory there when it fails an NFS symlink.
1536 ${remove} -r -f ${link}
1537 ${hard_link} ${srcfile} ${link}
1538 fi
1539 if test ! -r ${link} ; then
1540 echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
1541 exit 1
1542 fi
1544 echo "Linked \"${link}\" to \"${srcfile}\"."
1545 done
1547 # Create a .gdbinit file which runs the one in srcdir
1548 # and tells GDB to look there for source files.
1550 if test -r ${srcdir}/.gdbinit ; then
1551 case ${srcdir} in
1552 .) ;;
1553 *) cat > ./.gdbinit <<EOF
1554 # ${NO_EDIT}
1555 dir ${srcdir}
1556 dir .
1557 source ${srcdir}/.gdbinit
1558 EOF
1559 ;;
1560 esac
1561 fi
1563 # Make sure that the compiler is able to generate an executable. If it
1564 # can't, we are probably in trouble. We don't care whether we can run the
1565 # executable--we might be using a cross compiler--we only care whether it
1566 # can be created. At this point the main configure script has set CC.
1567 we_are_ok=no
1568 echo "int main () { return 0; }" > conftest.c
1569 ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
1570 if test $? = 0 ; then
1571 if test -s conftest || test -s conftest.exe ; then
1572 we_are_ok=yes
1573 fi
1574 fi
1575 case $we_are_ok in
1576 no)
1577 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
1578 echo 1>&2 "*** You must set the environment variable CC to a working compiler."
1579 rm -f conftest*
1580 exit 1
1581 ;;
1582 esac
1583 rm -f conftest*
1585 # The Solaris /usr/ucb/cc compiler does not appear to work.
1586 case "${host}" in
1587 sparc-sun-solaris2*)
1588 CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
1589 if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
1590 could_use=
1591 test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
1592 if test -d /opt/cygnus/bin ; then
1593 if test "$could_use" = "" ; then
1594 could_use="/opt/cygnus/bin"
1595 else
1596 could_use="$could_use or /opt/cygnus/bin"
1597 fi
1598 fi
1599 if test "$could_use" = "" ; then
1600 echo "Warning: compilation may fail because you're using"
1601 echo "/usr/ucb/cc. You should change your PATH or CC "
1602 echo "variable and rerun configure."
1603 else
1604 echo "Warning: compilation may fail because you're using"
1605 echo "/usr/ucb/cc, when you should use the C compiler from"
1606 echo "$could_use. You should change your"
1607 echo "PATH or CC variable and rerun configure."
1608 fi
1609 fi
1610 ;;
1611 esac
1613 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
1614 # binutils tools will find libbfd.so.
1615 case "${enable_shared}" in
1616 no | "") SET_LIB_PATH= ;;
1617 *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
1618 esac
1620 case "${host}" in
1621 *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
1622 *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
1623 esac
1625 # Record target_configdirs and the configure arguments for target and
1626 # build configuration in Makefile.
1627 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
1629 # This is the final value for target_configdirs. configdirs already
1630 # has its final value, as does build_modules. It's time to create some
1631 # lists of valid targets.
1633 all_build_modules=
1634 configure_build_modules=
1635 for module in ${build_modules} ; do
1636 all_build_modules=all-build-${module}
1637 configure_build_modules=configure-build-${module}
1638 done
1640 # Determine whether gdb needs tk/tcl or not.
1641 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
1642 # and in that case we want gdb to be built without tk. Ugh!
1643 # In fact I believe gdb is the *only* package directly dependent on tk,
1644 # so we should be able to put the 'maybe's in unconditionally and
1645 # leave out the maybe dependencies when enable_gdbtk is false. I'm not
1646 # 100% sure that that's safe though.
1648 gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
1649 case "$enable_gdbtk" in
1650 no)
1651 GDB_TK="" ;;
1652 yes)
1653 GDB_TK="${gdb_tk}" ;;
1654 *)
1655 # Only add the dependency on gdbtk when GDBtk is part of the gdb
1656 # distro. Eventually someone will fix this and move Insight, nee
1657 # gdbtk to a separate directory.
1658 if test -d ${srcdir}/gdb/gdbtk ; then
1659 GDB_TK="${gdb_tk}"
1660 else
1661 GDB_TK=""
1662 fi
1663 ;;
1664 esac
1666 # Create the 'maybe dependencies'. This uses a temporary file.
1668 # While at that, we remove Makefiles if we were started for recursive
1669 # configuration, so that the top-level Makefile reconfigures them,
1670 # like we used to do when configure itself was recursive.
1671 rm -f maybedep.tmp
1672 echo '# maybedep.tmp' > maybedep.tmp
1674 # Make-targets which may need maybe dependencies.
1675 mts="configure all install check clean distclean dvi info install-info"
1676 mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
1678 # Loop over modules and make-targets.
1679 for module in ${build_modules} ; do
1680 if test -z "${no_recursion}" \
1681 && test -f ${build_subdir}/${module}/Makefile; then
1682 echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
1683 rm -f ${build_subdir}/${module}/Makefile
1684 fi
1685 for mt in ${mts} ; do
1686 case ${mt} in
1687 install) ;; # No installing build modules.
1688 *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
1689 esac
1690 done
1691 done
1692 for module in ${configdirs} ; do
1693 if test -z "${no_recursion}" \
1694 && test -f ${module}/Makefile; then
1695 echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
1696 rm -f ${module}/Makefile
1697 fi
1698 for mt in ${mts} ; do
1699 echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
1700 done
1701 done
1702 for module in ${target_configdirs} ; do
1703 if test -z "${no_recursion}" \
1704 && test -f ${target_subdir}/${module}/Makefile; then
1705 echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
1706 rm -f ${target_subdir}/${module}/Makefile
1707 fi
1708 for mt in ${mts} ; do
1709 echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
1710 done
1711 done
1712 maybe_dependencies=maybedep.tmp
1713 AC_SUBST_FILE(maybe_dependencies)
1715 # Create the serialization dependencies. This uses a temporary file.
1717 AC_ARG_ENABLE([serial-configure],
1718 [ --enable-serial-[{host,target,build}-]configure
1719 Force sequential configuration of
1720 sub-packages for the host, target or build
1721 machine, or all sub-packages])
1723 case ${enable_serial_configure} in
1724 yes)
1725 enable_serial_build_configure=yes
1726 enable_serial_host_configure=yes
1727 enable_serial_target_configure=yes
1728 ;;
1729 esac
1731 # These force 'configure's to be done one at a time, to avoid problems
1732 # with contention over a shared config.cache.
1733 rm -f serdep.tmp
1734 echo '# serdep.tmp' > serdep.tmp
1735 olditem=
1736 test "x${enable_serial_build_configure}" = xyes &&
1737 for item in ${build_configdirs} ; do
1738 case ${olditem} in
1739 "") ;;
1740 *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
1741 esac
1742 olditem=${item}
1743 done
1744 olditem=
1745 test "x${enable_serial_host_configure}" = xyes &&
1746 for item in ${configdirs} ; do
1747 case ${olditem} in
1748 "") ;;
1749 *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
1750 esac
1751 olditem=${item}
1752 done
1753 olditem=
1754 test "x${enable_serial_target_configure}" = xyes &&
1755 for item in ${target_configdirs} ; do
1756 case ${olditem} in
1757 "") ;;
1758 *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
1759 esac
1760 olditem=${item}
1761 done
1762 serialization_dependencies=serdep.tmp
1763 AC_SUBST_FILE(serialization_dependencies)
1765 # Base args. Strip norecursion, cache-file, srcdir, host, build,
1766 # target and nonopt. These are the ones we might not want to pass
1767 # down to subconfigures.
1768 baseargs=`echo " ${ac_configure_args} " | \
1769 sed -e 's/ --no[[^ ]]* / /' \
1770 -e 's/ --c[[a-z-]]*[[= ]][[^ ]]* / /' \
1771 -e 's/ --sr[[a-z-]]*[[= ]][[^ ]]* / /' \
1772 -e 's/ --ho[[a-z-]]*[[= ]][[^ ]]* / /' \
1773 -e 's/ --bu[[a-z-]]*[[= ]][[^ ]]* / /' \
1774 -e 's/ --t[[a-z-]]*[[= ]][[^ ]]* / /' \
1775 -e 's/ -cache-file[[= ]][[^ ]]* / /' \
1776 -e 's/ -srcdir[[= ]][[^ ]]* / /' \
1777 -e 's/ -host[[= ]][[^ ]]* / /' \
1778 -e 's/ -build[[= ]][[^ ]]* / /' \
1779 -e 's/ -target[[= ]][[^ ]]* / /' \
1780 -e "s/ [[^' -][^ ]*] / /" \
1781 -e 's/^ *//;s/ *$//'`
1783 # For the build-side libraries, we just need to pretend we're native,
1784 # and not use the same cache file. Multilibs are neither needed nor
1785 # desired.
1786 build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
1788 # For host modules, accept cache file option, or specification as blank.
1789 case "${cache_file}" in
1790 "") # empty
1791 cache_file_option="" ;;
1792 /* | [[A-Za-z]]:[[\\/]]* ) # absolute path
1793 cache_file_option="--cache-file=${cache_file}" ;;
1794 *) # relative path
1795 cache_file_option="--cache-file=../${cache_file}" ;;
1796 esac
1798 host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
1800 target_configargs=${baseargs}
1802 # Passing a --with-cross-host argument lets the target libraries know
1803 # whether they are being built with a cross-compiler or being built
1804 # native. However, it would be better to use other mechanisms to make the
1805 # sorts of decisions they want to make on this basis. Please consider
1806 # this option to be deprecated. FIXME.
1807 if test x${is_cross_compiler} = xyes ; then
1808 target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
1809 fi
1811 # Default to --enable-multilib.
1812 if test x${enable_multilib} = x ; then
1813 target_configargs="--enable-multilib ${target_configargs}"
1814 fi
1816 # Pass --with-newlib if appropriate. Note that target_configdirs has
1817 # changed from the earlier setting of with_newlib.
1818 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
1819 target_configargs="--with-newlib ${target_configargs}"
1820 fi
1822 # Pass the appropriate --host, --build, and --cache-file arguments.
1823 target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
1825 # provide a proper gxx_include_dir.
1826 # Note, if you change the default, make sure to fix both here and in
1827 # the gcc and libstdc++-v3 subdirectories.
1828 # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
1829 case "${with_gxx_include_dir}" in
1830 yes)
1831 AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
1832 ;;
1833 no | "")
1834 case "${enable_version_specific_runtime_libs}" in
1835 yes) gxx_include_dir='${libsubdir}/include/c++' ;;
1836 *)
1837 . ${srcdir}/config.if
1838 gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
1839 esac ;;
1840 *) gxx_include_dir=${with_gxx_include_dir} ;;
1841 esac
1843 FLAGS_FOR_TARGET=
1844 case " $target_configdirs " in
1845 *" newlib "*)
1846 case " $target_configargs " in
1847 *" --with-newlib "*)
1848 case "$target" in
1849 *-cygwin*)
1850 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
1851 esac
1853 # If we're not building GCC, don't discard standard headers.
1854 if test -d ${srcdir}/gcc; then
1855 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
1857 if test "${build}" != "${host}"; then
1858 # On Canadian crosses, CC_FOR_TARGET will have already been set
1859 # by `configure', so we won't have an opportunity to add -Bgcc/
1860 # to it. This is right: we don't want to search that directory
1861 # for binaries, but we want the header files in there, so add
1862 # them explicitly.
1863 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
1865 # Someone might think of using the pre-installed headers on
1866 # Canadian crosses, in case the installed compiler is not fully
1867 # compatible with the compiler being built. In this case, it
1868 # would be better to flag an error than risking having
1869 # incompatible object files being constructed. We can't
1870 # guarantee that an error will be flagged, but let's hope the
1871 # compiler will do it, when presented with incompatible header
1872 # files.
1873 fi
1874 fi
1876 case "${target}-${is_cross_compiler}" in
1877 i[[3456789]]86-*-linux*-no)
1878 # Here host == target, so we don't need to build gcc,
1879 # so we don't want to discard standard headers.
1880 FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
1881 ;;
1882 *)
1883 # If we're building newlib, use its generic headers last, but search
1884 # for any libc-related directories first (so make it the last -B
1885 # switch).
1886 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
1887 ;;
1888 esac
1889 ;;
1890 esac
1891 ;;
1892 esac
1894 # On Canadian crosses, we'll be searching the right directories for
1895 # the previously-installed cross compiler, so don't bother to add
1896 # flags for directories within the install tree of the compiler
1897 # being built; programs in there won't even run.
1898 if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
1899 # Search for pre-installed headers if nothing else fits.
1900 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
1901 fi
1903 if test "x${use_gnu_ld}" = x &&
1904 echo " ${configdirs} " | grep " ld " > /dev/null ; then
1905 # Arrange for us to find uninstalled linker scripts.
1906 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
1907 fi
1909 if test "x${CC_FOR_TARGET+set}" = xset; then
1910 :
1911 elif test -d ${srcdir}/gcc; then
1912 CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
1913 elif test "$host" = "$target"; then
1914 CC_FOR_TARGET='$(CC)'
1915 else
1916 CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
1917 fi
1918 CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1920 if test "x${GCJ_FOR_TARGET+set}" = xset; then
1921 :
1922 elif test -d ${srcdir}/gcc; then
1923 GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
1924 elif test "$host" = "$target"; then
1925 GCJ_FOR_TARGET='gcj'
1926 else
1927 GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
1928 fi
1929 GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1931 # Don't use libstdc++-v3's flags to configure/build itself.
1932 libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
1933 raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
1935 if test "x${CXX_FOR_TARGET+set}" = xset; then
1936 :
1937 elif test -d ${srcdir}/gcc; then
1938 # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
1939 # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
1940 # default whereas gcc does not.
1941 # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
1942 # all other cases.
1943 CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
1944 RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
1945 elif test "$host" = "$target"; then
1946 CXX_FOR_TARGET='$(CXX)'
1947 RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
1948 else
1949 CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
1950 RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
1951 fi
1952 CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1953 RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
1955 qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
1956 qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
1958 # We want to defer the evaluation of `cmd`s and shell variables in
1959 # CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
1960 # bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
1961 # quotes, but we still have to duplicate `$'s so that shell variables
1962 # can be expanded by the nested make as shell variables, not as make
1963 # macros.
1964 qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
1965 qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
1967 # Wrap CC_FOR_TARGET and friends, for certain types of builds.
1968 CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
1969 GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
1970 CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
1971 RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
1972 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
1973 RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
1975 # Makefile fragments.
1976 host_makefile_frag=${srcdir}/${host_makefile_frag}
1977 target_makefile_frag=${srcdir}/${target_makefile_frag}
1978 alphaieee_frag=${srcdir}/${alphaieee_frag}
1979 ospace_frag=${srcdir}/${ospace_frag}
1980 AC_SUBST_FILE(host_makefile_frag)
1981 AC_SUBST_FILE(target_makefile_frag)
1982 AC_SUBST_FILE(alphaieee_frag)
1983 AC_SUBST_FILE(ospace_frag)
1985 # Miscellanea: directories, flags, etc.
1986 AC_SUBST(SET_LIB_PATH)
1987 AC_SUBST(RPATH_ENVVAR)
1988 AC_SUBST(BUILD_PREFIX)
1989 AC_SUBST(BUILD_PREFIX_1)
1990 AC_SUBST(configlinks)
1991 AC_SUBST(gcc_version_trigger)
1992 AC_SUBST(gcc_version)
1993 AC_SUBST(tooldir)
1994 AC_SUBST(build_tooldir)
1995 AC_SUBST(GDB_TK)
1996 AC_SUBST(gxx_include_dir)
1997 AC_SUBST(libstdcxx_incdir)
1999 # Build module lists & subconfigure args.
2000 AC_SUBST(build_configargs)
2001 AC_SUBST(configure_build_modules)
2002 AC_SUBST(all_build_modules)
2004 # Host module lists & subconfigure args.
2005 AC_SUBST(host_configargs)
2006 AC_SUBST(configdirs)
2008 # Target module lists & subconfigure args.
2009 AC_SUBST(target_configargs)
2010 AC_SUBST(target_configdirs)
2012 # Build tools.
2013 AC_SUBST(BISON)
2014 AC_SUBST(CC_FOR_BUILD)
2015 AC_SUBST(LEX)
2016 AC_SUBST(MAKEINFO)
2017 AC_SUBST(YACC)
2018 AC_SUBST(config_shell)
2020 # Host tools.
2021 NCN_STRICT_CHECK_TOOL(AR, ar)
2022 NCN_STRICT_CHECK_TOOL(AS, as)
2023 NCN_STRICT_CHECK_TOOL(DLLTOOL, dlltool)
2024 NCN_STRICT_CHECK_TOOL(LD, ld)
2025 NCN_STRICT_CHECK_TOOL(NM, nm)
2026 NCN_STRICT_CHECK_TOOL(RANLIB, ranlib, :)
2027 NCN_STRICT_CHECK_TOOL(WINDRES, windres)
2028 NCN_STRICT_CHECK_TOOL(OBJCOPY, objcopy)
2029 NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
2030 AC_SUBST(CC)
2031 AC_SUBST(CXX)
2032 AC_SUBST(CFLAGS)
2033 AC_SUBST(CXXFLAGS)
2034 AC_SUBST(DEFAULT_YACC)
2035 AC_SUBST(DEFAULT_LEX)
2036 AC_SUBST(DEFAULT_M4)
2038 # Target tools.
2039 NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
2040 NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
2041 NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
2042 NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
2043 NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
2044 NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
2045 NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
2047 AC_SUBST(GCC_FOR_TARGET)
2048 AC_SUBST(FLAGS_FOR_TARGET)
2049 AC_SUBST(CC_FOR_TARGET)
2050 AC_SUBST(GCJ_FOR_TARGET)
2051 AC_SUBST(CXX_FOR_TARGET)
2052 AC_SUBST(RAW_CXX_FOR_TARGET)
2053 AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
2054 AC_SUBST(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
2056 # Fix up target tools.
2057 if test "x${build}" = "x${host}" ; then
2058 # In this case, the newly built tools can and should be used,
2059 # so we override the results of the autoconf tests.
2060 # This should really only happen when the tools are actually being built,
2061 # but that's a further refinement. The new build scheme, where
2062 # tools are built into a structure paralleling where they're installed,
2063 # should also eliminate all of this cleanly.
2064 AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
2065 AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
2066 DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
2067 LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
2068 NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
2069 RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
2070 WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
2071 fi
2072 # Certain tools may need extra flags.
2073 AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
2074 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
2075 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
2077 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
2078 AC_ARG_ENABLE(maintainer-mode,
2079 [ --enable-maintainer-mode enable make rules and dependencies not useful
2080 (and sometimes confusing) to the casual installer],
2081 USE_MAINTAINER_MODE=$enableval,
2082 USE_MAINTAINER_MODE=no)
2083 AC_MSG_RESULT($USE_MAINTAINER_MODE)
2084 AC_SUBST(MAINTAINER_MODE_TRUE)
2085 AC_SUBST(MAINTAINER_MODE_FALSE)
2086 if test "$USE_MAINTAINER_MODE" = yes; then
2087 MAINTAINER_MODE_TRUE=
2088 MAINTAINER_MODE_FALSE='#'
2089 else
2090 MAINTAINER_MODE_TRUE='#'
2091 MAINTAINER_MODE_FALSE=
2092 fi
2093 MAINT=$MAINTAINER_MODE_TRUE
2094 AC_SUBST(MAINT)dnl
2096 AC_OUTPUT(Makefile)