2015-09-28 Paul Thomas <pault@gcc.gnu.org>
[official-gcc.git] / gcc / ada / styleg.adb
bloba421f2502852bf3fd8290bcae994d6ce88348aea
1 ------------------------------------------------------------------------------
2 -- --
3 -- GNAT COMPILER COMPONENTS --
4 -- --
5 -- S T Y L E G --
6 -- --
7 -- B o d y --
8 -- --
9 -- Copyright (C) 1992-2014, Free Software Foundation, Inc. --
10 -- --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING3. If not, go to --
19 -- http://www.gnu.org/licenses for a complete copy of the license. --
20 -- --
21 -- GNAT was originally developed by the GNAT team at New York University. --
22 -- Extensive contributions were provided by Ada Core Technologies Inc. --
23 -- --
24 ------------------------------------------------------------------------------
26 -- This version of the Style package implements the standard GNAT style
27 -- checking rules. For documentation of these rules, see comments on the
28 -- individual procedures.
30 with Atree; use Atree;
31 with Casing; use Casing;
32 with Csets; use Csets;
33 with Einfo; use Einfo;
34 with Err_Vars; use Err_Vars;
35 with Opt; use Opt;
36 with Scans; use Scans;
37 with Sinfo; use Sinfo;
38 with Sinput; use Sinput;
39 with Stylesw; use Stylesw;
41 package body Styleg is
43 use ASCII;
45 Blank_Lines : Nat := 0;
46 -- Counts number of empty lines seen. Reset to zero if a non-empty line
47 -- is encountered. Used to check for trailing blank lines in Check_EOF,
48 -- and for multiple blank lines.
50 Blank_Line_Location : Source_Ptr;
51 -- Remembers location of first blank line in a series. Used to issue an
52 -- appropriate diagnostic if subsequent blank lines or the end of file
53 -- is encountered.
55 -----------------------
56 -- Local Subprograms --
57 -----------------------
59 procedure Check_No_Space_After;
60 -- Checks that there is a non-white space character after the current
61 -- token, or white space followed by a comment, or the end of line.
62 -- Issue error message if not.
64 procedure Check_No_Space_Before;
65 -- Check that token is first token on line, or else is not preceded
66 -- by white space. Signal error of space not allowed if not.
68 procedure Check_Separate_Stmt_Lines_Cont;
69 -- Non-inlined continuation of Check_Separate_Stmt_Lines
71 function Determine_Token_Casing return Casing_Type;
72 -- Determine casing of current token
74 procedure Error_Space_Not_Allowed (S : Source_Ptr);
75 -- Posts an error message indicating that a space is not allowed
76 -- at the given source location.
78 procedure Error_Space_Required (S : Source_Ptr);
79 -- Posts an error message indicating that a space is required at
80 -- the given source location.
82 function Is_White_Space (C : Character) return Boolean;
83 pragma Inline (Is_White_Space);
84 -- Returns True for space or HT, False otherwise
85 -- What about VT and FF, should they return True ???
87 procedure Require_Following_Space;
88 pragma Inline (Require_Following_Space);
89 -- Require token to be followed by white space. Used only if in GNAT
90 -- style checking mode.
92 procedure Require_Preceding_Space;
93 pragma Inline (Require_Preceding_Space);
94 -- Require token to be preceded by white space. Used only if in GNAT
95 -- style checking mode.
97 ----------------------
98 -- Check_Abs_Or_Not --
99 ----------------------
101 -- In check token mode (-gnatyt), ABS/NOT must be followed by a space
103 procedure Check_Abs_Not is
104 begin
105 if Style_Check_Tokens then
106 if Source (Scan_Ptr) > ' ' then -- ???
107 Error_Space_Required (Scan_Ptr);
108 end if;
109 end if;
110 end Check_Abs_Not;
112 ----------------------
113 -- Check_Apostrophe --
114 ----------------------
116 -- Do not allow space before or after apostrophe -- OR AFTER???
118 procedure Check_Apostrophe is
119 begin
120 if Style_Check_Tokens then
121 Check_No_Space_After;
122 end if;
123 end Check_Apostrophe;
125 -----------------
126 -- Check_Arrow --
127 -----------------
129 -- In check tokens mode (-gnatys), arrow must be surrounded by spaces,
130 -- except that within the argument of a Depends macro the required format
131 -- is =>+ rather than => +).
133 procedure Check_Arrow (Inside_Depends : Boolean := False) is
134 begin
135 if Style_Check_Tokens then
136 Require_Preceding_Space;
138 if not Inside_Depends then
139 Require_Following_Space;
141 -- Special handling for Inside_Depends
143 else
144 if Source (Scan_Ptr) = ' '
145 and then Source (Scan_Ptr + 1) = '+'
146 then
147 Error_Space_Not_Allowed (Scan_Ptr);
149 elsif Source (Scan_Ptr) /= ' '
150 and then Source (Scan_Ptr) /= '+'
151 then
152 Require_Following_Space;
153 end if;
154 end if;
155 end if;
156 end Check_Arrow;
158 --------------------------
159 -- Check_Attribute_Name --
160 --------------------------
162 -- In check attribute casing mode (-gnatya), attribute names must be
163 -- mixed case, i.e. start with an upper case letter, and otherwise
164 -- lower case, except after an underline character.
166 procedure Check_Attribute_Name (Reserved : Boolean) is
167 pragma Warnings (Off, Reserved);
168 begin
169 if Style_Check_Attribute_Casing then
170 if Determine_Token_Casing /= Mixed_Case then
171 Error_Msg_SC -- CODEFIX
172 ("(style) bad capitalization, mixed case required");
173 end if;
174 end if;
175 end Check_Attribute_Name;
177 ---------------------------
178 -- Check_Binary_Operator --
179 ---------------------------
181 -- In check token mode (-gnatyt), binary operators other than the special
182 -- case of exponentiation require surrounding space characters.
184 procedure Check_Binary_Operator is
185 begin
186 if Style_Check_Tokens then
187 Require_Preceding_Space;
188 Require_Following_Space;
189 end if;
190 end Check_Binary_Operator;
192 ----------------------------
193 -- Check_Boolean_Operator --
194 ----------------------------
196 procedure Check_Boolean_Operator (Node : Node_Id) is
198 function OK_Boolean_Operand (N : Node_Id) return Boolean;
199 -- Returns True for simple variable, or "not X1" or "X1 and X2" or
200 -- "X1 or X2" where X1, X2 are recursively OK_Boolean_Operand's.
202 ------------------------
203 -- OK_Boolean_Operand --
204 ------------------------
206 function OK_Boolean_Operand (N : Node_Id) return Boolean is
207 begin
208 if Nkind_In (N, N_Identifier, N_Expanded_Name) then
209 return True;
211 elsif Nkind (N) = N_Op_Not then
212 return OK_Boolean_Operand (Original_Node (Right_Opnd (N)));
214 elsif Nkind_In (N, N_Op_And, N_Op_Or) then
215 return OK_Boolean_Operand (Original_Node (Left_Opnd (N)))
216 and then
217 OK_Boolean_Operand (Original_Node (Right_Opnd (N)));
219 else
220 return False;
221 end if;
222 end OK_Boolean_Operand;
224 -- Start of processing for Check_Boolean_Operator
226 begin
227 if Style_Check_Boolean_And_Or
228 and then Comes_From_Source (Node)
229 then
230 declare
231 Orig : constant Node_Id := Original_Node (Node);
233 begin
234 if Nkind_In (Orig, N_Op_And, N_Op_Or) then
235 declare
236 L : constant Node_Id := Original_Node (Left_Opnd (Orig));
237 R : constant Node_Id := Original_Node (Right_Opnd (Orig));
239 begin
240 -- First OK case, simple boolean constants/identifiers
242 if OK_Boolean_Operand (L)
243 and then
244 OK_Boolean_Operand (R)
245 then
246 return;
248 -- Second OK case, modular types
250 elsif Is_Modular_Integer_Type (Etype (Node)) then
251 return;
253 -- Third OK case, array types
255 elsif Is_Array_Type (Etype (Node)) then
256 return;
258 -- Otherwise we have an error
260 elsif Nkind (Orig) = N_Op_And then
261 Error_Msg -- CODEFIX
262 ("(style) `AND THEN` required", Sloc (Orig));
263 else
264 Error_Msg -- CODEFIX
265 ("(style) `OR ELSE` required", Sloc (Orig));
266 end if;
267 end;
268 end if;
269 end;
270 end if;
271 end Check_Boolean_Operator;
273 ---------------
274 -- Check_Box --
275 ---------------
277 -- In check token mode (-gnatyt), box must be preceded by a space or by
278 -- a left parenthesis. Spacing checking on the surrounding tokens takes
279 -- care of the remaining checks.
281 procedure Check_Box is
282 begin
283 if Style_Check_Tokens then
284 if Prev_Token /= Tok_Left_Paren then
285 Require_Preceding_Space;
286 end if;
287 end if;
288 end Check_Box;
290 -----------------
291 -- Check_Colon --
292 -----------------
294 -- In check token mode (-gnatyt), colon must be surrounded by spaces
296 procedure Check_Colon is
297 begin
298 if Style_Check_Tokens then
299 Require_Preceding_Space;
300 Require_Following_Space;
301 end if;
302 end Check_Colon;
304 -----------------------
305 -- Check_Colon_Equal --
306 -----------------------
308 -- In check token mode (-gnatyt), := must be surrounded by spaces
310 procedure Check_Colon_Equal is
311 begin
312 if Style_Check_Tokens then
313 Require_Preceding_Space;
314 Require_Following_Space;
315 end if;
316 end Check_Colon_Equal;
318 -----------------
319 -- Check_Comma --
320 -----------------
322 -- In check token mode (-gnatyt), comma must be either the first
323 -- token on a line, or be preceded by a non-blank character.
324 -- It must also always be followed by a blank.
326 procedure Check_Comma is
327 begin
328 if Style_Check_Tokens then
329 Check_No_Space_Before;
331 if Source (Scan_Ptr) > ' ' then
332 Error_Space_Required (Scan_Ptr);
333 end if;
334 end if;
335 end Check_Comma;
337 -------------------
338 -- Check_Comment --
339 -------------------
341 -- In check comment mode (-gnatyc) there are several requirements on the
342 -- format of comments. The following are permissible comment formats:
344 -- 1. Any comment that is not at the start of a line, i.e. where the
345 -- initial minuses are not the first non-blank characters on the
346 -- line must have at least one blank after the second minus or a
347 -- special character as defined in rule 5.
349 -- 2. A row of all minuses of any length is permitted (see procedure
350 -- box above in the source of this routine).
352 -- 3. A comment line starting with two minuses and a space, and ending
353 -- with a space and two minuses. Again see the procedure title box
354 -- immediately above in the source.
356 -- 4. A full line comment where two spaces follow the two minus signs.
357 -- This is the normal comment format in GNAT style, as typified by
358 -- the comments you are reading now.
360 -- 5. A full line comment where the first character after the second
361 -- minus is a special character, i.e. a character in the ASCII
362 -- range 16#21#..16#2F# or 16#3A#..16#3F#. This allows special
363 -- comments, such as those generated by gnatprep, or those that
364 -- appear in the SPARK annotation language to be accepted.
366 -- Note: for GNAT internal files (-gnatg switch set on for the
367 -- compilation), the only special sequence recognized and allowed
368 -- is --! as generated by gnatprep.
370 -- 6. In addition, the comment must be properly indented if comment
371 -- indentation checking is active (Style_Check_Indentation non-zero).
372 -- Either the start column must be a multiple of this indentation,
373 -- or the indentation must match that of the next non-blank line,
374 -- or must match the indentation of the immediately preciding line
375 -- if it is non-blank.
377 procedure Check_Comment is
378 S : Source_Ptr;
379 C : Character;
381 function Is_Box_Comment return Boolean;
382 -- Returns True if the last two characters on the line are -- which
383 -- characterizes a box comment (as for example follows this spec).
385 function Is_Special_Character (C : Character) return Boolean;
386 -- Determines if C is a special character (see rule 5 above)
388 function Same_Column_As_Next_Non_Blank_Line return Boolean;
389 -- Called for a full line comment. If the indentation of this comment
390 -- matches that of the next non-blank line in the source, then True is
391 -- returned, otherwise False.
393 function Same_Column_As_Previous_Line return Boolean;
394 -- Called for a full line comment. If the previous line is blank, then
395 -- returns False. Otherwise, if the indentation of this comment matches
396 -- that of the previous line in the source, then True is returned,
397 -- otherwise False.
399 --------------------
400 -- Is_Box_Comment --
401 --------------------
403 function Is_Box_Comment return Boolean is
404 S : Source_Ptr;
406 begin
407 -- Do we need to worry about UTF_32 line terminators here ???
409 S := Scan_Ptr + 3;
410 while Source (S) not in Line_Terminator loop
411 S := S + 1;
412 end loop;
414 return Source (S - 1) = '-' and then Source (S - 2) = '-';
415 end Is_Box_Comment;
417 --------------------------
418 -- Is_Special_Character --
419 --------------------------
421 function Is_Special_Character (C : Character) return Boolean is
422 begin
423 if GNAT_Mode then
424 return C = '!';
425 else
426 return
427 Character'Pos (C) in 16#21# .. 16#2F#
428 or else
429 Character'Pos (C) in 16#3A# .. 16#3F#;
430 end if;
431 end Is_Special_Character;
433 ----------------------------------------
434 -- Same_Column_As_Next_Non_Blank_Line --
435 ----------------------------------------
437 function Same_Column_As_Next_Non_Blank_Line return Boolean is
438 P : Source_Ptr;
440 begin
441 -- Step to end of line
443 P := Scan_Ptr + 2;
444 while Source (P) not in Line_Terminator loop
445 P := P + 1;
446 end loop;
448 -- Step past blanks, and line terminators (UTF_32 case???)
450 while Source (P) <= ' ' and then Source (P) /= EOF loop
451 P := P + 1;
452 end loop;
454 -- Compare columns
456 return Get_Column_Number (Scan_Ptr) = Get_Column_Number (P);
457 end Same_Column_As_Next_Non_Blank_Line;
459 ----------------------------------
460 -- Same_Column_As_Previous_Line --
461 ----------------------------------
463 function Same_Column_As_Previous_Line return Boolean is
464 S, P : Source_Ptr;
466 begin
467 -- Point S to start of this line, and P to start of previous line
469 S := Line_Start (Scan_Ptr);
470 P := S;
471 Backup_Line (P);
473 -- Step P to first non-blank character on line
475 loop
476 -- If we get back to start of current line, then the previous line
477 -- was blank, and we always return False in that situation.
479 if P = S then
480 return False;
481 end if;
483 exit when Source (P) /= ' ' and then Source (P) /= ASCII.HT;
484 P := P + 1;
485 end loop;
487 -- Compare columns
489 return Get_Column_Number (Scan_Ptr) = Get_Column_Number (P);
490 end Same_Column_As_Previous_Line;
492 -- Start of processing for Check_Comment
494 begin
495 -- Can never have a non-blank character preceding the first minus
497 if Style_Check_Comments then
498 if Scan_Ptr > Source_First (Current_Source_File)
499 and then Source (Scan_Ptr - 1) > ' '
500 then
501 Error_Msg_S -- CODEFIX
502 ("(style) space required");
503 end if;
504 end if;
506 -- For a comment that is not at the start of the line, the only
507 -- requirement is that we cannot have a non-blank character after
508 -- the second minus sign or a special character.
510 if Scan_Ptr /= First_Non_Blank_Location then
511 if Style_Check_Comments then
512 if Source (Scan_Ptr + 2) > ' '
513 and then not Is_Special_Character (Source (Scan_Ptr + 2))
514 then
515 Error_Msg -- CODEFIX
516 ("(style) space required", Scan_Ptr + 2);
517 end if;
518 end if;
520 return;
522 -- Case of a comment that is at the start of a line
524 else
525 -- First check, must be in appropriately indented column
527 if Style_Check_Indentation /= 0 then
528 if Start_Column rem Style_Check_Indentation /= 0 then
529 if not Same_Column_As_Next_Non_Blank_Line
530 and then not Same_Column_As_Previous_Line
531 then
532 Error_Msg_S -- CODEFIX
533 ("(style) bad column");
534 end if;
536 return;
537 end if;
538 end if;
540 -- If we are not checking comments, nothing more to do
542 if not Style_Check_Comments then
543 return;
544 end if;
546 -- Case of not followed by a blank. Usually wrong, but there are
547 -- some exceptions that we permit.
549 if Source (Scan_Ptr + 2) /= ' ' then
550 C := Source (Scan_Ptr + 2);
552 -- Case of -- all on its own on a line is OK
554 if C < ' ' then
555 return;
556 end if;
558 -- Case of --x, x special character is OK (gnatprep/SPARK/etc.)
559 -- This is not permitted in internal GNAT implementation units
560 -- except for the case of --! as used by gnatprep output.
562 if Is_Special_Character (C) then
563 return;
564 end if;
566 -- The only other case in which we allow a character after
567 -- the -- other than a space is when we have a row of minus
568 -- signs (case of header lines for a box comment for example).
570 S := Scan_Ptr + 2;
571 while Source (S) >= ' ' loop
572 if Source (S) /= '-' then
573 if Is_Box_Comment
574 or else Style_Check_Comments_Spacing = 1
575 then
576 Error_Space_Required (Scan_Ptr + 2);
577 else
578 Error_Msg -- CODEFIX
579 ("(style) two spaces required", Scan_Ptr + 2);
580 end if;
582 return;
583 end if;
585 S := S + 1;
586 end loop;
588 -- If we are followed by a blank, then the comment is OK if the
589 -- character following this blank is another blank or a format
590 -- effector, or if the required comment spacing is 1.
592 elsif Source (Scan_Ptr + 3) <= ' '
593 or else Style_Check_Comments_Spacing = 1
594 then
595 return;
597 -- Here is the case where we only have one blank after the two minus
598 -- signs, with Style_Check_Comments_Spacing set to 2, which is an
599 -- error unless the line ends with two minus signs, the case of a
600 -- box comment.
602 elsif not Is_Box_Comment then
603 Error_Space_Required (Scan_Ptr + 3);
604 end if;
605 end if;
606 end Check_Comment;
608 -------------------
609 -- Check_Dot_Dot --
610 -------------------
612 -- In check token mode (-gnatyt), ".." must be surrounded by spaces
614 procedure Check_Dot_Dot is
615 begin
616 if Style_Check_Tokens then
617 Require_Preceding_Space;
618 Require_Following_Space;
619 end if;
620 end Check_Dot_Dot;
622 ---------------
623 -- Check_EOF --
624 ---------------
626 -- In check blanks at end mode, check no blank lines precede the EOF
628 procedure Check_EOF is
629 begin
630 if Style_Check_Blank_Lines then
632 -- We expect one blank line, from the EOF, but no more than one
634 if Blank_Lines = 2 then
635 Error_Msg -- CODEFIX
636 ("(style) blank line not allowed at end of file",
637 Blank_Line_Location);
639 elsif Blank_Lines >= 3 then
640 Error_Msg -- CODEFIX
641 ("(style) blank lines not allowed at end of file",
642 Blank_Line_Location);
643 end if;
644 end if;
645 end Check_EOF;
647 -----------------------------------
648 -- Check_Exponentiation_Operator --
649 -----------------------------------
651 -- No spaces are required for the ** operator in GNAT style check mode
653 procedure Check_Exponentiation_Operator is
654 begin
655 null;
656 end Check_Exponentiation_Operator;
658 --------------
659 -- Check_HT --
660 --------------
662 -- In check horizontal tab mode (-gnatyh), tab characters are not allowed
664 procedure Check_HT is
665 begin
666 if Style_Check_Horizontal_Tabs then
667 Error_Msg_S -- CODEFIX
668 ("(style) horizontal tab not allowed");
669 end if;
670 end Check_HT;
672 -----------------------
673 -- Check_Indentation --
674 -----------------------
676 -- In check indentation mode (-gnaty? for ? a digit), a new statement or
677 -- declaration is required to start in a column that is a multiple of the
678 -- indentation amount.
680 procedure Check_Indentation is
681 begin
682 if Style_Check_Indentation /= 0 then
683 if Token_Ptr = First_Non_Blank_Location
684 and then Start_Column rem Style_Check_Indentation /= 0
685 then
686 Error_Msg_SC -- CODEFIX
687 ("(style) bad indentation");
688 end if;
689 end if;
690 end Check_Indentation;
692 ----------------------
693 -- Check_Left_Paren --
694 ----------------------
696 -- In check token mode (-gnatyt), left paren must not be preceded by an
697 -- identifier character or digit (a separating space is required) and may
698 -- never be followed by a space.
700 procedure Check_Left_Paren is
701 begin
702 if Style_Check_Tokens then
703 if Token_Ptr > Source_First (Current_Source_File)
704 and then Identifier_Char (Source (Token_Ptr - 1))
705 then
706 Error_Space_Required (Token_Ptr);
707 end if;
709 Check_No_Space_After;
710 end if;
711 end Check_Left_Paren;
713 ---------------------------
714 -- Check_Line_Max_Length --
715 ---------------------------
717 -- In check max line length mode (-gnatym), the line length must
718 -- not exceed the permitted maximum value.
720 procedure Check_Line_Max_Length (Len : Int) is
721 begin
722 if Style_Check_Max_Line_Length then
723 if Len > Style_Max_Line_Length then
724 Error_Msg
725 ("(style) this line is too long",
726 Current_Line_Start + Source_Ptr (Style_Max_Line_Length));
727 end if;
728 end if;
729 end Check_Line_Max_Length;
731 ---------------------------
732 -- Check_Line_Terminator --
733 ---------------------------
735 -- In check blanks at end mode (-gnatyb), lines may not end with a
736 -- trailing space.
738 -- In check form feeds mode (-gnatyf), the line terminator may not
739 -- be either of the characters FF or VT.
741 -- In check DOS line terminators node (-gnatyd), the line terminator
742 -- must be a single LF, without a following CR.
744 procedure Check_Line_Terminator (Len : Int) is
745 S : Source_Ptr;
747 L : Int := Len;
748 -- Length of line (adjusted down for blanks at end of line)
750 begin
751 -- Reset count of blank lines if first line
753 if Get_Logical_Line_Number (Scan_Ptr) = 1 then
754 Blank_Lines := 0;
755 end if;
757 -- Check FF/VT terminators
759 if Style_Check_Form_Feeds then
760 if Source (Scan_Ptr) = ASCII.FF then
761 Error_Msg_S -- CODEFIX
762 ("(style) form feed not allowed");
763 elsif Source (Scan_Ptr) = ASCII.VT then
764 Error_Msg_S -- CODEFIX
765 ("(style) vertical tab not allowed");
766 end if;
767 end if;
769 -- Check DOS line terminator
771 if Style_Check_DOS_Line_Terminator then
773 -- Ignore EOF, since we only get called with an EOF if it is the last
774 -- character in the buffer (and was therefore not in the source
775 -- file), since the terminating EOF is added to stop the scan.
777 if Source (Scan_Ptr) = EOF then
778 null;
780 -- Bad terminator if we don't have an LF
782 elsif Source (Scan_Ptr) /= LF then
783 Error_Msg_S ("(style) incorrect line terminator");
784 end if;
785 end if;
787 -- Remove trailing spaces
789 S := Scan_Ptr;
790 while L > 0 and then Is_White_Space (Source (S - 1)) loop
791 S := S - 1;
792 L := L - 1;
793 end loop;
795 -- Issue message for blanks at end of line if option enabled
797 if Style_Check_Blanks_At_End and then L < Len then
798 Error_Msg -- CODEFIX
799 ("(style) trailing spaces not permitted", S);
800 end if;
802 -- Deal with empty (blank) line
804 if L = 0 then
806 -- Increment blank line count
808 Blank_Lines := Blank_Lines + 1;
810 -- If first blank line, record location for later error message
812 if Blank_Lines = 1 then
813 Blank_Line_Location := Scan_Ptr;
814 end if;
816 -- Non-blank line, check for previous multiple blank lines
818 else
819 if Style_Check_Blank_Lines and then Blank_Lines > 1 then
820 Error_Msg -- CODEFIX
821 ("(style) multiple blank lines", Blank_Line_Location);
822 end if;
824 -- And reset blank line count
826 Blank_Lines := 0;
827 end if;
828 end Check_Line_Terminator;
830 ------------------
831 -- Check_Not_In --
832 ------------------
834 -- In check tokens mode, only one space between NOT and IN
836 procedure Check_Not_In is
837 begin
838 if Style_Check_Tokens then
839 if Source (Token_Ptr - 1) /= ' '
840 or else Token_Ptr - Prev_Token_Ptr /= 4
841 then -- CODEFIX?
842 Error_Msg
843 ("(style) single space must separate NOT and IN", Token_Ptr - 1);
844 end if;
845 end if;
846 end Check_Not_In;
848 --------------------------
849 -- Check_No_Space_After --
850 --------------------------
852 procedure Check_No_Space_After is
853 S : Source_Ptr;
855 begin
856 if Is_White_Space (Source (Scan_Ptr)) then
858 -- Allow one or more spaces if followed by comment
860 S := Scan_Ptr + 1;
861 loop
862 if Source (S) = '-' and then Source (S + 1) = '-' then
863 return;
865 elsif Is_White_Space (Source (S)) then
866 S := S + 1;
868 else
869 exit;
870 end if;
871 end loop;
873 Error_Space_Not_Allowed (Scan_Ptr);
874 end if;
875 end Check_No_Space_After;
877 ---------------------------
878 -- Check_No_Space_Before --
879 ---------------------------
881 procedure Check_No_Space_Before is
882 begin
883 if Token_Ptr > First_Non_Blank_Location
884 and then Source (Token_Ptr - 1) <= ' '
885 then
886 Error_Space_Not_Allowed (Token_Ptr - 1);
887 end if;
888 end Check_No_Space_Before;
890 -----------------------
891 -- Check_Pragma_Name --
892 -----------------------
894 -- In check pragma casing mode (-gnatyp), pragma names must be mixed
895 -- case, i.e. start with an upper case letter, and otherwise lower case,
896 -- except after an underline character.
898 procedure Check_Pragma_Name is
899 begin
900 if Style_Check_Pragma_Casing then
901 if Determine_Token_Casing /= Mixed_Case then
902 Error_Msg_SC -- CODEFIX
903 ("(style) bad capitalization, mixed case required");
904 end if;
905 end if;
906 end Check_Pragma_Name;
908 -----------------------
909 -- Check_Right_Paren --
910 -----------------------
912 -- In check token mode (-gnatyt), right paren must not be immediately
913 -- followed by an identifier character, and must never be preceded by
914 -- a space unless it is the initial non-blank character on the line.
916 procedure Check_Right_Paren is
917 begin
918 if Style_Check_Tokens then
919 if Identifier_Char (Source (Token_Ptr + 1)) then
920 Error_Space_Required (Token_Ptr + 1);
921 end if;
923 Check_No_Space_Before;
924 end if;
925 end Check_Right_Paren;
927 ---------------------
928 -- Check_Semicolon --
929 ---------------------
931 -- In check token mode (-gnatyt), semicolon does not permit a preceding
932 -- space and a following space is required.
934 procedure Check_Semicolon is
935 begin
936 if Style_Check_Tokens then
937 Check_No_Space_Before;
939 if Source (Scan_Ptr) > ' ' then
940 Error_Space_Required (Scan_Ptr);
941 end if;
942 end if;
943 end Check_Semicolon;
945 -------------------------------
946 -- Check_Separate_Stmt_Lines --
947 -------------------------------
949 procedure Check_Separate_Stmt_Lines is
950 begin
951 if Style_Check_Separate_Stmt_Lines then
952 Check_Separate_Stmt_Lines_Cont;
953 end if;
954 end Check_Separate_Stmt_Lines;
956 ------------------------------------
957 -- Check_Separate_Stmt_Lines_Cont --
958 ------------------------------------
960 procedure Check_Separate_Stmt_Lines_Cont is
961 S : Source_Ptr;
963 begin
964 -- Skip past white space
966 S := Scan_Ptr;
967 while Is_White_Space (Source (S)) loop
968 S := S + 1;
969 end loop;
971 -- Line terminator is OK
973 if Source (S) in Line_Terminator then
974 return;
976 -- Comment is OK
978 elsif Source (S) = '-' and then Source (S + 1) = '-' then
979 return;
981 -- ABORT keyword is OK after THEN (THEN ABORT case)
983 elsif Token = Tok_Then
984 and then (Source (S + 0) = 'a' or else Source (S + 0) = 'A')
985 and then (Source (S + 1) = 'b' or else Source (S + 1) = 'B')
986 and then (Source (S + 2) = 'o' or else Source (S + 2) = 'O')
987 and then (Source (S + 3) = 'r' or else Source (S + 3) = 'R')
988 and then (Source (S + 4) = 't' or else Source (S + 4) = 'T')
989 and then (Source (S + 5) in Line_Terminator
990 or else Is_White_Space (Source (S + 5)))
991 then
992 return;
994 -- PRAGMA keyword is OK after ELSE
996 elsif Token = Tok_Else
997 and then (Source (S + 0) = 'p' or else Source (S + 0) = 'P')
998 and then (Source (S + 1) = 'r' or else Source (S + 1) = 'R')
999 and then (Source (S + 2) = 'a' or else Source (S + 2) = 'A')
1000 and then (Source (S + 3) = 'g' or else Source (S + 3) = 'G')
1001 and then (Source (S + 4) = 'm' or else Source (S + 4) = 'M')
1002 and then (Source (S + 5) = 'a' or else Source (S + 5) = 'A')
1003 and then (Source (S + 6) in Line_Terminator
1004 or else Is_White_Space (Source (S + 6)))
1005 then
1006 return;
1008 -- Otherwise we have the style violation we are looking for
1010 else
1011 if Token = Tok_Then then
1012 Error_Msg -- CODEFIX
1013 ("(style) no statements may follow THEN on same line", S);
1014 else
1015 Error_Msg
1016 ("(style) no statements may follow ELSE on same line", S);
1017 end if;
1018 end if;
1019 end Check_Separate_Stmt_Lines_Cont;
1021 ----------------
1022 -- Check_Then --
1023 ----------------
1025 -- In check if then layout mode (-gnatyi), we expect a THEN keyword to
1026 -- appear either on the same line as the IF, or on a separate line if
1027 -- the IF statement extends for more than one line.
1029 procedure Check_Then (If_Loc : Source_Ptr) is
1030 begin
1031 if Style_Check_If_Then_Layout then
1032 declare
1033 If_Line : constant Physical_Line_Number :=
1034 Get_Physical_Line_Number (If_Loc);
1035 Then_Line : constant Physical_Line_Number :=
1036 Get_Physical_Line_Number (Token_Ptr);
1037 begin
1038 if If_Line = Then_Line then
1039 null;
1040 elsif Token_Ptr /= First_Non_Blank_Location then
1041 Error_Msg_SC ("(style) misplaced THEN");
1042 end if;
1043 end;
1044 end if;
1045 end Check_Then;
1047 -------------------------------
1048 -- Check_Unary_Plus_Or_Minus --
1049 -------------------------------
1051 -- In check token mode (-gnatyt), unary plus or minus must not be
1052 -- followed by a space.
1054 -- Annoying exception: if we have the sequence =>+ within a Depends pragma
1055 -- or aspect, then we insist on a space rather than forbidding it.
1057 procedure Check_Unary_Plus_Or_Minus (Inside_Depends : Boolean := False) is
1058 begin
1059 if Style_Check_Tokens then
1060 if not Inside_Depends then
1061 Check_No_Space_After;
1062 else
1063 Require_Following_Space;
1064 end if;
1065 end if;
1066 end Check_Unary_Plus_Or_Minus;
1068 ------------------------
1069 -- Check_Vertical_Bar --
1070 ------------------------
1072 -- In check token mode (-gnatyt), vertical bar must be surrounded by spaces
1074 procedure Check_Vertical_Bar is
1075 begin
1076 if Style_Check_Tokens then
1077 Require_Preceding_Space;
1078 Require_Following_Space;
1079 end if;
1080 end Check_Vertical_Bar;
1082 -----------------------
1083 -- Check_Xtra_Parens --
1084 -----------------------
1086 procedure Check_Xtra_Parens (Loc : Source_Ptr) is
1087 begin
1088 if Style_Check_Xtra_Parens then
1089 Error_Msg -- CODEFIX
1090 ("(style) redundant parentheses", Loc);
1091 end if;
1092 end Check_Xtra_Parens;
1094 ----------------------------
1095 -- Determine_Token_Casing --
1096 ----------------------------
1098 function Determine_Token_Casing return Casing_Type is
1099 begin
1100 return Determine_Casing (Source (Token_Ptr .. Scan_Ptr - 1));
1101 end Determine_Token_Casing;
1103 -----------------------------
1104 -- Error_Space_Not_Allowed --
1105 -----------------------------
1107 procedure Error_Space_Not_Allowed (S : Source_Ptr) is
1108 begin
1109 Error_Msg -- CODEFIX
1110 ("(style) space not allowed", S);
1111 end Error_Space_Not_Allowed;
1113 --------------------------
1114 -- Error_Space_Required --
1115 --------------------------
1117 procedure Error_Space_Required (S : Source_Ptr) is
1118 begin
1119 Error_Msg -- CODEFIX
1120 ("(style) space required", S);
1121 end Error_Space_Required;
1123 --------------------
1124 -- Is_White_Space --
1125 --------------------
1127 function Is_White_Space (C : Character) return Boolean is
1128 begin
1129 return C = ' ' or else C = HT;
1130 end Is_White_Space;
1132 -------------------
1133 -- Mode_In_Check --
1134 -------------------
1136 function Mode_In_Check return Boolean is
1137 begin
1138 return Style_Check and Style_Check_Mode_In;
1139 end Mode_In_Check;
1141 -----------------
1142 -- No_End_Name --
1143 -----------------
1145 -- In check end/exit labels mode (-gnatye), always require the name of
1146 -- a subprogram or package to be present on the END, so this is an error.
1148 procedure No_End_Name (Name : Node_Id) is
1149 begin
1150 if Style_Check_End_Labels then
1151 Error_Msg_Node_1 := Name;
1152 Error_Msg_SP -- CODEFIX
1153 ("(style) `END &` required");
1154 end if;
1155 end No_End_Name;
1157 ------------------
1158 -- No_Exit_Name --
1159 ------------------
1161 -- In check end/exit labels mode (-gnatye), always require the name of
1162 -- the loop to be present on the EXIT when exiting a named loop.
1164 procedure No_Exit_Name (Name : Node_Id) is
1165 begin
1166 if Style_Check_End_Labels then
1167 Error_Msg_Node_1 := Name;
1168 Error_Msg_SP -- CODEFIX
1169 ("(style) `EXIT &` required");
1170 end if;
1171 end No_Exit_Name;
1173 ----------------------------
1174 -- Non_Lower_Case_Keyword --
1175 ----------------------------
1177 -- In check casing mode (-gnatyk), reserved keywords must be spelled
1178 -- in all lower case (excluding keywords range, access, delta and digits
1179 -- used as attribute designators).
1181 procedure Non_Lower_Case_Keyword is
1182 begin
1183 if Style_Check_Keyword_Casing then
1184 Error_Msg_SC -- CODEFIX
1185 ("(style) reserved words must be all lower case");
1186 end if;
1187 end Non_Lower_Case_Keyword;
1189 -----------------------------
1190 -- Require_Following_Space --
1191 -----------------------------
1193 procedure Require_Following_Space is
1194 begin
1195 if Source (Scan_Ptr) > ' ' then
1196 Error_Space_Required (Scan_Ptr);
1197 end if;
1198 end Require_Following_Space;
1200 -----------------------------
1201 -- Require_Preceding_Space --
1202 -----------------------------
1204 procedure Require_Preceding_Space is
1205 begin
1206 if Token_Ptr > Source_First (Current_Source_File)
1207 and then Source (Token_Ptr - 1) > ' '
1208 then
1209 Error_Space_Required (Token_Ptr);
1210 end if;
1211 end Require_Preceding_Space;
1213 end Styleg;