* Makefile.in (rtlanal.o): Depend on $(TM_P_H).
[official-gcc.git] / libiberty / floatformat.c
blobb5d0121aad7498828aace7a6afb5a03ef9e2ab63
1 /* IEEE floating point support routines, for GDB, the GNU Debugger.
2 Copyright (C) 1991, 1994, 1999, 2000 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
20 #include "floatformat.h"
21 #include <math.h> /* ldexp */
22 #ifdef __STDC__
23 #include <stddef.h>
24 extern void *memcpy (void *s1, const void *s2, size_t n);
25 extern void *memset (void *s, int c, size_t n);
26 #else
27 extern char *memcpy ();
28 extern char *memset ();
29 #endif
31 /* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
32 going to bother with trying to muck around with whether it is defined in
33 a system header, what we do if not, etc. */
34 #define FLOATFORMAT_CHAR_BIT 8
36 /* floatformats for IEEE single and double, big and little endian. */
37 const struct floatformat floatformat_ieee_single_big =
39 floatformat_big, 32, 0, 1, 8, 127, 255, 9, 23,
40 floatformat_intbit_no,
41 "floatformat_ieee_single_big"
43 const struct floatformat floatformat_ieee_single_little =
45 floatformat_little, 32, 0, 1, 8, 127, 255, 9, 23,
46 floatformat_intbit_no,
47 "floatformat_ieee_single_little"
49 const struct floatformat floatformat_ieee_double_big =
51 floatformat_big, 64, 0, 1, 11, 1023, 2047, 12, 52,
52 floatformat_intbit_no,
53 "floatformat_ieee_double_big"
55 const struct floatformat floatformat_ieee_double_little =
57 floatformat_little, 64, 0, 1, 11, 1023, 2047, 12, 52,
58 floatformat_intbit_no,
59 "floatformat_ieee_double_little"
62 /* floatformat for IEEE double, little endian byte order, with big endian word
63 ordering, as on the ARM. */
65 const struct floatformat floatformat_ieee_double_littlebyte_bigword =
67 floatformat_littlebyte_bigword, 64, 0, 1, 11, 1023, 2047, 12, 52,
68 floatformat_intbit_no,
69 "floatformat_ieee_double_littlebyte_bigword"
72 const struct floatformat floatformat_i387_ext =
74 floatformat_little, 80, 0, 1, 15, 0x3fff, 0x7fff, 16, 64,
75 floatformat_intbit_yes,
76 "floatformat_i387_ext"
78 const struct floatformat floatformat_m68881_ext =
80 /* Note that the bits from 16 to 31 are unused. */
81 floatformat_big, 96, 0, 1, 15, 0x3fff, 0x7fff, 32, 64,
82 floatformat_intbit_yes,
83 "floatformat_m68881_ext"
85 const struct floatformat floatformat_i960_ext =
87 /* Note that the bits from 0 to 15 are unused. */
88 floatformat_little, 96, 16, 17, 15, 0x3fff, 0x7fff, 32, 64,
89 floatformat_intbit_yes,
90 "floatformat_i960_ext"
92 const struct floatformat floatformat_m88110_ext =
94 floatformat_big, 80, 0, 1, 15, 0x3fff, 0x7fff, 16, 64,
95 floatformat_intbit_yes,
96 "floatformat_m88110_ext"
98 const struct floatformat floatformat_m88110_harris_ext =
100 /* Harris uses raw format 128 bytes long, but the number is just an ieee
101 double, and the last 64 bits are wasted. */
102 floatformat_big,128, 0, 1, 11, 0x3ff, 0x7ff, 12, 52,
103 floatformat_intbit_no,
104 "floatformat_m88110_ext_harris"
106 const struct floatformat floatformat_arm_ext =
108 /* Bits 1 to 16 are unused. */
109 floatformat_big, 96, 0, 17, 15, 0x3fff, 0x7fff, 32, 64,
110 floatformat_intbit_yes,
111 "floatformat_arm_ext"
113 const struct floatformat floatformat_arm_ext_big =
115 /* Bits 1 to 16 are unused. */
116 floatformat_big, 96, 0, 17, 15, 0x3fff, 0x7fff, 32, 64,
117 floatformat_intbit_yes,
118 "floatformat_arm_ext_big"
120 const struct floatformat floatformat_arm_ext_littlebyte_bigword =
122 /* Bits 1 to 16 are unused. */
123 floatformat_littlebyte_bigword, 96, 0, 17, 15, 0x3fff, 0x7fff, 32, 64,
124 floatformat_intbit_yes,
125 "floatformat_arm_ext_littlebyte_bigword"
127 const struct floatformat floatformat_ia64_spill_big =
129 floatformat_big, 128, 0, 1, 17, 65535, 0x1ffff, 18, 64,
130 floatformat_intbit_yes,
131 "floatformat_ia64_spill_big"
133 const struct floatformat floatformat_ia64_spill_little =
135 floatformat_little, 128, 0, 1, 17, 65535, 0x1ffff, 18, 64,
136 floatformat_intbit_yes,
137 "floatformat_ia64_spill_little"
139 const struct floatformat floatformat_ia64_quad_big =
141 floatformat_big, 128, 0, 1, 15, 16383, 0x7fff, 16, 112,
142 floatformat_intbit_no,
143 "floatformat_ia64_quad_big"
145 const struct floatformat floatformat_ia64_quad_little =
147 floatformat_little, 128, 0, 1, 15, 16383, 0x7fff, 16, 112,
148 floatformat_intbit_no,
149 "floatformat_ia64_quad_little"
152 static unsigned long get_field PARAMS ((unsigned char *,
153 enum floatformat_byteorders,
154 unsigned int,
155 unsigned int,
156 unsigned int));
158 /* Extract a field which starts at START and is LEN bytes long. DATA and
159 TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
160 static unsigned long
161 get_field (data, order, total_len, start, len)
162 unsigned char *data;
163 enum floatformat_byteorders order;
164 unsigned int total_len;
165 unsigned int start;
166 unsigned int len;
168 unsigned long result;
169 unsigned int cur_byte;
170 int cur_bitshift;
172 /* Start at the least significant part of the field. */
173 cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
174 if (order == floatformat_little)
175 cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
176 cur_bitshift =
177 ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
178 result = *(data + cur_byte) >> (-cur_bitshift);
179 cur_bitshift += FLOATFORMAT_CHAR_BIT;
180 if (order == floatformat_little)
181 ++cur_byte;
182 else
183 --cur_byte;
185 /* Move towards the most significant part of the field. */
186 while ((unsigned int) cur_bitshift < len)
188 if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
189 /* This is the last byte; zero out the bits which are not part of
190 this field. */
191 result |=
192 (*(data + cur_byte) & ((1 << (len - cur_bitshift)) - 1))
193 << cur_bitshift;
194 else
195 result |= *(data + cur_byte) << cur_bitshift;
196 cur_bitshift += FLOATFORMAT_CHAR_BIT;
197 if (order == floatformat_little)
198 ++cur_byte;
199 else
200 --cur_byte;
202 return result;
205 #ifndef min
206 #define min(a, b) ((a) < (b) ? (a) : (b))
207 #endif
209 /* Convert from FMT to a double.
210 FROM is the address of the extended float.
211 Store the double in *TO. */
213 void
214 floatformat_to_double (fmt, from, to)
215 const struct floatformat *fmt;
216 char *from;
217 double *to;
219 unsigned char *ufrom = (unsigned char *)from;
220 double dto;
221 long exponent;
222 unsigned long mant;
223 unsigned int mant_bits, mant_off;
224 int mant_bits_left;
225 int special_exponent; /* It's a NaN, denorm or zero */
227 exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
228 fmt->exp_start, fmt->exp_len);
229 /* Note that if exponent indicates a NaN, we can't really do anything useful
230 (not knowing if the host has NaN's, or how to build one). So it will
231 end up as an infinity or something close; that is OK. */
233 mant_bits_left = fmt->man_len;
234 mant_off = fmt->man_start;
235 dto = 0.0;
237 special_exponent = exponent == 0 || (unsigned long) exponent == fmt->exp_nan;
239 /* Don't bias zero's, denorms or NaNs. */
240 if (!special_exponent)
241 exponent -= fmt->exp_bias;
243 /* Build the result algebraically. Might go infinite, underflow, etc;
244 who cares. */
246 /* If this format uses a hidden bit, explicitly add it in now. Otherwise,
247 increment the exponent by one to account for the integer bit. */
249 if (!special_exponent)
251 if (fmt->intbit == floatformat_intbit_no)
252 dto = ldexp (1.0, exponent);
253 else
254 exponent++;
257 while (mant_bits_left > 0)
259 mant_bits = min (mant_bits_left, 32);
261 mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
262 mant_off, mant_bits);
264 dto += ldexp ((double)mant, exponent - mant_bits);
265 exponent -= mant_bits;
266 mant_off += mant_bits;
267 mant_bits_left -= mant_bits;
270 /* Negate it if negative. */
271 if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
272 dto = -dto;
273 *to = dto;
276 static void put_field PARAMS ((unsigned char *, enum floatformat_byteorders,
277 unsigned int,
278 unsigned int,
279 unsigned int,
280 unsigned long));
282 /* Set a field which starts at START and is LEN bytes long. DATA and
283 TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
284 static void
285 put_field (data, order, total_len, start, len, stuff_to_put)
286 unsigned char *data;
287 enum floatformat_byteorders order;
288 unsigned int total_len;
289 unsigned int start;
290 unsigned int len;
291 unsigned long stuff_to_put;
293 unsigned int cur_byte;
294 int cur_bitshift;
296 /* Start at the least significant part of the field. */
297 cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
298 if (order == floatformat_little)
299 cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
300 cur_bitshift =
301 ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
302 *(data + cur_byte) &=
303 ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1) << (-cur_bitshift));
304 *(data + cur_byte) |=
305 (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
306 cur_bitshift += FLOATFORMAT_CHAR_BIT;
307 if (order == floatformat_little)
308 ++cur_byte;
309 else
310 --cur_byte;
312 /* Move towards the most significant part of the field. */
313 while ((unsigned int) cur_bitshift < len)
315 if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
317 /* This is the last byte. */
318 *(data + cur_byte) &=
319 ~((1 << (len - cur_bitshift)) - 1);
320 *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
322 else
323 *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
324 & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
325 cur_bitshift += FLOATFORMAT_CHAR_BIT;
326 if (order == floatformat_little)
327 ++cur_byte;
328 else
329 --cur_byte;
333 /* The converse: convert the double *FROM to an extended float
334 and store where TO points. Neither FROM nor TO have any alignment
335 restrictions. */
337 void
338 floatformat_from_double (fmt, from, to)
339 const struct floatformat *fmt;
340 double *from;
341 char *to;
343 double dfrom;
344 int exponent;
345 double mant;
346 unsigned int mant_bits, mant_off;
347 int mant_bits_left;
348 unsigned char *uto = (unsigned char *)to;
350 memcpy (&dfrom, from, sizeof (dfrom));
351 memset (uto, 0, fmt->totalsize / FLOATFORMAT_CHAR_BIT);
352 if (dfrom == 0)
353 return; /* Result is zero */
354 if (dfrom != dfrom)
356 /* From is NaN */
357 put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
358 fmt->exp_len, fmt->exp_nan);
359 /* Be sure it's not infinity, but NaN value is irrel */
360 put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
361 32, 1);
362 return;
365 /* If negative, set the sign bit. */
366 if (dfrom < 0)
368 put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
369 dfrom = -dfrom;
372 /* How to tell an infinity from an ordinary number? FIXME-someday */
374 mant = frexp (dfrom, &exponent);
375 put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
376 exponent + fmt->exp_bias - 1);
378 mant_bits_left = fmt->man_len;
379 mant_off = fmt->man_start;
380 while (mant_bits_left > 0)
382 unsigned long mant_long;
383 mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
385 mant *= 4294967296.0;
386 mant_long = (unsigned long)mant;
387 mant -= mant_long;
389 /* If the integer bit is implicit, then we need to discard it.
390 If we are discarding a zero, we should be (but are not) creating
391 a denormalized number which means adjusting the exponent
392 (I think). */
393 if ((unsigned int) mant_bits_left == fmt->man_len
394 && fmt->intbit == floatformat_intbit_no)
396 mant_long &= 0x7fffffff;
397 mant_bits -= 1;
399 else if (mant_bits < 32)
401 /* The bits we want are in the most significant MANT_BITS bits of
402 mant_long. Move them to the least significant. */
403 mant_long >>= 32 - mant_bits;
406 put_field (uto, fmt->byteorder, fmt->totalsize,
407 mant_off, mant_bits, mant_long);
408 mant_off += mant_bits;
409 mant_bits_left -= mant_bits;
414 #ifdef IEEE_DEBUG
416 /* This is to be run on a host which uses IEEE floating point. */
418 void
419 ieee_test (n)
420 double n;
422 double result;
423 char exten[16];
425 floatformat_to_double (&floatformat_ieee_double_big, &n, &result);
426 if (n != result)
427 printf ("Differ(to): %.20g -> %.20g\n", n, result);
428 floatformat_from_double (&floatformat_ieee_double_big, &n, &result);
429 if (n != result)
430 printf ("Differ(from): %.20g -> %.20g\n", n, result);
432 floatformat_from_double (&floatformat_m68881_ext, &n, exten);
433 floatformat_to_double (&floatformat_m68881_ext, exten, &result);
434 if (n != result)
435 printf ("Differ(to+from): %.20g -> %.20g\n", n, result);
437 #if IEEE_DEBUG > 1
438 /* This is to be run on a host which uses 68881 format. */
440 long double ex = *(long double *)exten;
441 if (ex != n)
442 printf ("Differ(from vs. extended): %.20g\n", n);
444 #endif
448 main ()
450 ieee_test (0.5);
451 ieee_test (256.0);
452 ieee_test (0.12345);
453 ieee_test (234235.78907234);
454 ieee_test (-512.0);
455 ieee_test (-0.004321);
456 return 0;
458 #endif