gcc/mklibgcc.in

   1 #!/bin/sh
   2 # Construct makefile for libgcc.
   3 #   Copyright (C) 2000, 2002, 2003 Free Software Foundation, Inc.
   4 #
   5 # This file is part of GCC.
   6
   7 # Arguments, taken from the environment, since there are a lot
   8 # of them, and positional args becomes quite ugly.
   9 #
  10 # objext
  11 # LIB1ASMFUNCS
  12 # LIB2FUNCS_ST
  13 # LIBGCOV
  14 # LIB2ADD
  15 # LIB2ADD_ST
  16 # LIB2ADDEH
  17 # LIB2ADDEHDEP
  18 # FPBIT
  19 # FPBIT_FUNCS
  20 # LIB2_DIVMOD_FUNCS
  21 # DPBIT
  22 # DPBIT_FUNCS
  23 # TPBIT
  24 # TPBIT_FUNCS
  25 # LIBGCC
  26 # MULTILIBS
  27 # EXTRA_MULTILIB_PARTS
  28 # SHLIB_EXT
  29 # SHLIB_LINK
  30 # SHLIB_MULTILIB
  31 # SHLIB_MKMAP
  32 # SHLIB_MKMAP_OPTS
  33 # SHLIB_MAPFILES
  34 # SHLIB_NM_FLAGS
  35 # SHLIB_INSTALL
  36 # MULTILIB_OSDIRNAMES
  37
  38 # Make needs VPATH to be literal.
  39 echo 'srcdir = @srcdir@'
  40 echo 'VPATH = @srcdir@'
  41 echo 'EQ = ='
  42 echo
  43 echo 'force:'
  44 echo
  45
  46 # Library members defined in libgcc2.c.
  47 lib2funcs='_muldi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3
  48         _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi
  49         _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi
  50         _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf _clear_cache
  51         _trampoline __main _absvsi2 _absvdi2 _addvsi3 _addvdi3
  52         _subvsi3 _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2 _ctors
  53         _ffssi2 _ffsdi2 _clz _clzsi2 _clzdi2 _ctzsi2 _ctzdi2 _popcount_tab
  54         _popcountsi2 _popcountdi2 _paritysi2 _paritydi2'
  55
  56 # Disable SHLIB_LINK if shared libgcc not enabled.
  57 if [ "@enable_shared@" = "no" ]; then
  58   SHLIB_LINK=""
  59 fi
  60
  61 # Build lines.
  62
  63 gcc_compile='$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES)'
  64 make_compile='$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
  65           AR_FOR_TARGET="$(AR_FOR_TARGET)" \
  66           AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
  67           AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
  68           AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
  69           CC="$(CC)" CFLAGS="$(CFLAGS)" \
  70           BUILD_PREFIX="$(BUILD_PREFIX)" \
  71           BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \
  72           LANGUAGES="$(LANGUAGES)"'
  73
  74 # Dependencies for libgcc2.c
  75 libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c $(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h'" $LIB2ADDEHDEP"
  76
  77 # Dependencies for libgcov.c
  78 libgcov_c_dep='stmp-dirs $(srcdir)/libgcov.c $(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h'
  79
  80 # Dependencies for fp-bit.c
  81 fpbit_c_dep='stmp-dirs config.status tsystem.h'
  82
  83 #
  84 # Build libgcc1 components.
  85 #
  86
  87 libgcc1_objs=""
  88
  89 for name in $LIB1ASMFUNCS; do
  90   for ml in $MULTILIBS; do
  91     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
  92     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
  93     out="libgcc/${dir}/${name}${objext}"
  94
  95     echo ${out}: stmp-dirs '$(srcdir)/config/$(LIB1ASMSRC)'
  96     echo "      $gcc_compile" $flags -DL$name -xassembler-with-cpp \
  97           -c '$(srcdir)/config/$(LIB1ASMSRC)' -o $out
  98
  99     # Remove any objects from lib2funcs and LIB2_DIVMOD_FUNCS that are
 100     # defined as optimized assembly code in LIB1ASMFUNCS.
 101     lib2funcs=`echo $lib2funcs | sed -e 's/^'$name' //' \
 102                                      -e 's/ '$name' / /' \
 103                                      -e 's/ '$name'$//'`
 104     LIB2_DIVMOD_FUNCS=`echo $LIB2_DIVMOD_FUNCS | sed -e 's/^'$name' //' \
 105                                                      -e 's/ '$name' / /' \
 106                                                      -e 's/ '$name'$//'`
 107   done
 108   libgcc1_objs="$libgcc1_objs ${name}${objext}"
 109 done
 110
 111 #
 112 # Build libgcc2 components.
 113 #
 114
 115 libgcc2_objs=""
 116 libgcc2_st_objs=""
 117 libgcc2_eh_objs=""
 118
 119 for name in $lib2funcs; do
 120   for ml in $MULTILIBS; do
 121     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 122     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 123     out="libgcc/${dir}/${name}${objext}"
 124
 125     echo $out: $libgcc2_c_dep
 126     echo "      $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
 127       -c '$(srcdir)/libgcc2.c' -o $out
 128   done
 129   libgcc2_objs="$libgcc2_objs ${name}${objext}"
 130 done
 131
 132 for name in $LIB2FUNCS_ST; do
 133   for ml in $MULTILIBS; do
 134     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 135     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 136     out="libgcc/${dir}/${name}${objext}"
 137
 138     echo $out: $libgcc2_c_dep
 139     echo "      $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
 140       -c '$(srcdir)/libgcc2.c' -o $out
 141   done
 142   libgcc2_st_objs="$libgcc2_st_objs ${name}${objext}"
 143 done
 144
 145 for name in $LIB2_DIVMOD_FUNCS; do
 146   for ml in $MULTILIBS; do
 147     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 148     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 149     out="libgcc/${dir}/${name}${objext}"
 150
 151     echo $out: $libgcc2_c_dep
 152     echo "      $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
 153       -c '$(srcdir)/libgcc2.c' -fexceptions -fnon-call-exceptions -o $out
 154   done
 155   libgcc2_objs="$libgcc2_objs ${name}${objext}"
 156 done
 157
 158 if [ "$FPBIT" ]; then
 159   for name in $FPBIT_FUNCS; do
 160     for ml in $MULTILIBS; do
 161       dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 162       flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 163       out="libgcc/${dir}/${name}${objext}"
 164
 165       echo $out: $FPBIT $fpbit_c_dep
 166       echo "    $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \
 167         -c $FPBIT -o $out
 168     done
 169     libgcc2_objs="$libgcc2_objs ${name}${objext}"
 170   done
 171 fi
 172
 173 if [ "$DPBIT" ]; then
 174   for name in $DPBIT_FUNCS; do
 175     for ml in $MULTILIBS; do
 176       dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 177       flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 178       out="libgcc/${dir}/${name}${objext}"
 179
 180       echo $out: $DPBIT $fpbit_c_dep
 181       echo "    $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \
 182         -c $DPBIT -o $out
 183     done
 184     libgcc2_objs="$libgcc2_objs ${name}${objext}"
 185   done
 186 fi
 187
 188 if [ "$TPBIT" ]; then
 189   for name in $TPBIT_FUNCS; do
 190     for ml in $MULTILIBS; do
 191       dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 192       flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 193       out="libgcc/${dir}/${name}${objext}"
 194
 195       echo $out: $TPBIT $fpbit_c_dep
 196       echo "    $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \
 197         -c $TPBIT -o $out
 198     done
 199     libgcc2_objs="$libgcc2_objs ${name}${objext}"
 200   done
 201 fi
 202
 203 for file in $LIB2ADD; do
 204   name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
 205   oname=`echo $name | sed -e 's,.*/,,'`
 206
 207   for ml in $MULTILIBS; do
 208     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 209     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 210     out="libgcc/${dir}/${oname}${objext}"
 211     if [ ${name}.asm = ${file} ]; then
 212       flags="$flags -xassembler-with-cpp"
 213     fi
 214
 215     echo $out: stmp-dirs $file
 216     echo "      $gcc_compile" $flags -c $file -o $out
 217   done
 218   libgcc2_objs="$libgcc2_objs ${oname}${objext}"
 219 done
 220
 221 for file in $LIB2ADDEH; do
 222   name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
 223   oname=`echo $name | sed -e 's,.*/,,'`
 224
 225   for ml in $MULTILIBS; do
 226     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 227     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 228     out="libgcc/${dir}/${oname}${objext}"
 229     if [ ${name}.asm = ${file} ]; then
 230       flags="$flags -xassembler-with-cpp"
 231     fi
 232
 233     echo $out: stmp-dirs $file
 234     echo "      $gcc_compile" $flags -fexceptions -c $file -o $out
 235   done
 236   if [ "$SHLIB_LINK" ]; then
 237     libgcc2_eh_objs="$libgcc2_eh_objs ${oname}${objext}"
 238   else
 239     libgcc2_objs="$libgcc2_objs ${oname}${objext}"
 240   fi
 241 done
 242
 243 for file in $LIB2ADD_ST; do
 244   name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
 245   oname=`echo $name | sed -e 's,.*/,,'`
 246
 247   for ml in $MULTILIBS; do
 248     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 249     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 250     out="libgcc/${dir}/${oname}${objext}"
 251     if [ ${name}.asm = ${file} ]; then
 252       flags="$flags -xassembler-with-cpp"
 253     fi
 254
 255     echo $out: stmp-dirs $file
 256     echo "      $gcc_compile" $flags -c $file -o $out
 257   done
 258   libgcc2_st_objs="$libgcc2_st_objs ${oname}${objext}"
 259 done
 260
 261 #
 262 # build libgcov components
 263 #
 264
 265 libgcov_objs=""
 266
 267 for name in $LIBGCOV; do
 268   for ml in $MULTILIBS; do
 269     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 270     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 271     out="libgcc/${dir}/${name}${objext}"
 272
 273     echo $out: $libgcov_c_dep
 274     echo "      $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
 275       -c '$(srcdir)/libgcov.c' -o $out
 276   done
 277   libgcov_objs="$libgcov_objs ${name}${objext}"
 278 done
 279
 280 # SHLIB_MKMAP
 281 # SHLIB_MKMAP_OPTS
 282 # SHLIB_MAPFILES
 283 for ml in $MULTILIBS; do
 284   dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 285   flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 286
 287   libgcc_objs=""
 288   libgcc_eh_objs=""
 289   for o in $libgcc1_objs; do
 290     libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
 291   done
 292   for o in $libgcc2_objs; do
 293     libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
 294   done
 295   for o in $libgcc2_eh_objs; do
 296     libgcc_eh_objs="$libgcc_eh_objs libgcc/${dir}/$o"
 297   done
 298   libgcc_sh_objs="$libgcc_objs $libgcc_eh_objs"
 299   shlib_deps="$libgcc_sh_objs"
 300
 301   libgcc_st_objs=""
 302   for o in $libgcc2_st_objs; do
 303     libgcc_st_objs="$libgcc_st_objs libgcc/${dir}/$o"
 304   done
 305
 306   libgcov_a_objs=""
 307   for o in $libgcov_objs; do
 308     libgcov_a_objs="$libgcov_a_objs libgcc/${dir}/$o"
 309   done
 310
 311   if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" ]; then
 312     mapfile="libgcc/${dir}/libgcc.map"
 313     tmpmapfile="libgcc/${dir}/tmp-libgcc.map"
 314     # This uses a here document instead of echos because some shells
 315     # will convert the \1 in the second sed command to a control-A.
 316     # The behavior of here documents is more predictable.
 317     cat <<EOF
 318
 319 ${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_sh_objs
 320         { \$(NM_FOR_TARGET) $SHLIB_NM_FLAGS $libgcc_sh_objs; echo %%; \\
 321           cat $SHLIB_MAPFILES \\
 322             | sed -e '/^[   ]*#/d' \\
 323                   -e 's/^%\(if\|else\|elif\|endif\|define\)/#\1/' \\
 324             | $gcc_compile $flags -E -xassembler-with-cpp -; \\
 325         } | \$(AWK) -f $SHLIB_MKMAP $SHLIB_MKMAP_OPTS > ${tmpmapfile}
 326         mv '$tmpmapfile' \$@
 327 EOF
 328   fi
 329   shlib_deps="$shlib_deps $mapfile"
 330
 331   # Depend on EXTRA_MULTILIB_PARTS, since that's where crtbegin/end
 332   # usually are put in a true multilib situation.
 333   for f in $EXTRA_MULTILIB_PARTS; do
 334     shlib_deps="$shlib_deps $dir/$f"
 335   done
 336
 337   libgcc_a_objs="$libgcc_objs $libgcc_st_objs"
 338
 339   if [ "@libgcc_visibility@" = yes -a "$SHLIB_LINK" ]; then
 340     libgcc_a_objs=
 341     echo ""
 342     echo "libgcc/${dir}/stacknote.s: stmp-dirs"
 343     echo '      @( echo | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -S -o - -xc - | grep .note.GNU-stack || : ) > $@.tmp'
 344     echo '      @mv -f $@.tmp $@'
 345     echo ""
 346     for o in $libgcc_objs $libgcc_st_objs; do
 347       # .oS objects will have all non-local symbol definitions .hidden
 348       oS=`echo ${o} | sed s~${objext}'$~.oS~g'`
 349       echo "${oS}: stmp-dirs libgcc/${dir}/stacknote.s ${o}"
 350       echo '    ( $(NM_FOR_TARGET) '${SHLIB_NM_FLAGS} ${o}' | $(AWK) '\''NF == 3 { print "\t.hidden", $$3 }'\''; cat libgcc/${dir}/stacknote.s ) | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -r -nostdinc -nostdlib -o $@ '${o}' -xassembler -'
 351       libgcc_a_objs="${libgcc_a_objs} ${oS}"
 352     done
 353   fi
 354
 355   echo ""
 356   echo "${dir}/libgcc.a: $libgcc_a_objs"
 357   echo "        -rm -rf ${dir}/libgcc.a"
 358   echo '        $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc.a $libgcc_a_objs
 359   echo '        $(RANLIB_FOR_TARGET)' ${dir}/libgcc.a
 360
 361   echo ""
 362   echo "${dir}/libgcov.a: $libgcov_a_objs"
 363   echo "        -rm -rf ${dir}/libgcov.a"
 364   echo '        $(AR_CREATE_FOR_TARGET)' ${dir}/libgcov.a $libgcov_a_objs
 365   echo '        $(RANLIB_FOR_TARGET)' ${dir}/libgcov.a
 366
 367   if [ "$SHLIB_LINK" ]; then
 368
 369     echo ""
 370     echo "${dir}/libgcc_eh.a: $libgcc_eh_objs"
 371     echo "      -rm -rf ${dir}/libgcc_eh.a"
 372     echo '      $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc_eh.a $libgcc_eh_objs
 373     echo '      $(RANLIB_FOR_TARGET)' ${dir}/libgcc_eh.a
 374
 375     if [ -z "$SHLIB_MULTILIB" ]; then
 376       if [ "$dir" = . ]; then
 377         shlib_base_name=libgcc_s
 378       else
 379         shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
 380       fi
 381       shlib_so_name="$shlib_base_name"
 382       shlib_dir=
 383       if [ -n "$MULTILIB_OSDIRNAMES" ]; then
 384         if [ "$dir" != . ]; then
 385           gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
 386           os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
 387           shlib_dir="$dir"/
 388           gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
 389           os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
 390           if [ -z "$os_multilib_base" ]; then
 391             shlib_so_name=libgcc_s
 392           else
 393             shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
 394           fi
 395         fi
 396       fi
 397       echo ""
 398       echo "${dir}/${shlib_base_name}${SHLIB_EXT}: $shlib_deps"
 399       echo "    $SHLIB_LINK" \
 400          | sed -e "s%@multilib_flags@%$flags%g" \
 401                -e "s%@multilib_dir@%$dir%g" \
 402                -e "s%@shlib_objs@%$libgcc_sh_objs%g" \
 403                -e "s%@shlib_base_name@%$shlib_base_name%g" \
 404                -e "s%@shlib_map_file@%$mapfile%g" \
 405                -e "s%@shlib_so_name@%$shlib_so_name%g" \
 406                -e "s%@shlib_dir@%$shlib_dir%g"
 407     elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
 408       shlib_base_name="libgcc_s";
 409       echo ""
 410       echo "${shlib_base_name}${SHLIB_EXT}: $shlib_deps"
 411       echo "    $SHLIB_LINK" \
 412          | sed -e "s%@multilib_flags@%$flags%g" \
 413                -e "s%@multilib_dir@%$dir%g" \
 414                -e "s%@shlib_objs@%$libgcc_sh_objs%g" \
 415                -e "s%@shlib_base_name@%$shlib_base_name%g" \
 416                -e "s%@shlib_map_file@%$mapfile%g" \
 417                -e "s%@shlib_so_name@%$shlib_base_name%g" \
 418                -e "s%@shlib_dir@%%g"
 419     fi
 420   fi
 421 done
 422
 423 dirs=libgcc
 424 for ml in $MULTILIBS; do
 425   dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 426   if [ $dir != . ]; then
 427     dirs="$dirs ${dir} libgcc/${dir}"
 428   fi
 429 done
 430 echo ''
 431 echo 'libgcc-stage-start:'
 432 echo '  for dir in '"${dirs}"'; do \'
 433 echo '    if [ -d $(stage)/$$dir ]; then true; else '$mkinstalldirs' $(stage)/$$dir; fi; \'
 434 echo '  done'
 435 echo '  -for dir in '"${dirs}"'; do \'
 436 echo '    mv $$dir/*'"${objext}"' $(stage)/$$dir; \'
 437 echo '    test ! -f $$dir/stacknote.s || mv $$dir/stacknote.s $(stage)/$$dir; \'
 438 echo '    test ! -f $$dir/libgcc.a || mv $$dir/lib* $(stage)/$$dir; \'
 439 echo '  done'
 440
 441 echo ""
 442 all=stmp-dirs
 443 dirs=libgcc
 444
 445 for ml in $MULTILIBS; do
 446   dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 447   if [ $dir != . ]; then
 448     dirs="$dirs ${dir} libgcc/${dir}"
 449   fi
 450   all="$all ${dir}/libgcc.a ${dir}/libgcov.a"
 451   if [ "$SHLIB_LINK" ]; then
 452     all="$all ${dir}/libgcc_eh.a"
 453     if [ -z "$SHLIB_MULTILIB" ]; then
 454       if [ "$dir" = "." ]; then
 455         suff="";
 456       else
 457         suff=_`echo $dir | sed s,/,_,g`
 458       fi
 459       all="$all ${dir}/libgcc_s${suff}${SHLIB_EXT}"
 460     elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
 461       all="$all libgcc_s${SHLIB_EXT}"
 462     fi
 463   fi
 464 done
 465
 466 echo 'stmp-dirs: force'
 467 echo '  for d in '"$dirs"'; do \'
 468 echo '    if [ -d $$d ]; then true; else '$mkinstalldirs' $$d; fi; \'
 469 echo '  done'
 470 echo '  if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi'
 471
 472 for f in $EXTRA_MULTILIB_PARTS; do
 473   for ml in $MULTILIBS; do
 474     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 475     flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 476     case $dir in
 477     .) out=$f ; t= ;;
 478     *) out=$dir/$f ; t=$dir/ ;;
 479     esac
 480     case $out in
 481     # Prevent `make' from interpreting $out as a macro assignment
 482     *'$(EQ)'*) targ="T_TARGET=$out T_TARGET" ;;
 483     *) targ=$out ;;
 484     esac
 485
 486     echo $out: stmp-dirs
 487     echo "      $make_compile" \\
 488     echo '        LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)' $flags '" ' \\
 489     echo '        MULTILIB_CFLAGS="'$flags'"' T=$t $targ
 490
 491     all="$all $out"
 492   done
 493 done
 494
 495 echo ""
 496 echo "all: $all"
 497
 498 echo ""
 499 echo "install: $all"
 500 for ml in $MULTILIBS; do
 501   dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 502   flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
 503   if [ $dir != . ]; then
 504     ldir='$(DESTDIR)$(libsubdir)'/$dir
 505     echo "      if [ -d $ldir ]; then true; else $mkinstalldirs $ldir; chmod a+rx $ldir; fi;"
 506   else
 507     ldir='$(DESTDIR)$(libsubdir)'
 508   fi
 509   echo '        $(INSTALL_DATA)' ${dir}/libgcc.a ${ldir}/
 510   echo '        $(RANLIB_FOR_TARGET)' ${ldir}/libgcc.a
 511   echo '        $(INSTALL_DATA)' ${dir}/libgcov.a ${ldir}/
 512   echo '        $(RANLIB_FOR_TARGET)' ${ldir}/libgcov.a
 513
 514   if [ "$SHLIB_LINK" ]; then
 515     echo '      $(INSTALL_DATA)' ${dir}/libgcc_eh.a ${ldir}/
 516     echo '      $(RANLIB_FOR_TARGET)' ${ldir}/libgcc_eh.a
 517
 518     if [ -z "$SHLIB_MULTILIB" ]; then
 519       if [ "$dir" = . ]; then
 520         shlib_base_name=libgcc_s
 521       else
 522         shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
 523       fi
 524       shlib_so_name="$shlib_base_name"
 525       shlib_dir=
 526       shlib_slibdir_qual=
 527       if [ -n "$MULTILIB_OSDIRNAMES" ]; then
 528         gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
 529         os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
 530         if [ "$dir" != . ]; then
 531           shlib_dir="$dir"/
 532         fi
 533         gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
 534         os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
 535         if [ -z "$os_multilib_base" ]; then
 536           shlib_so_name=libgcc_s
 537           if [ "$os_multilib_dir" != "." ]; then
 538             shlib_slibdir_qual="/$os_multilib_dir"
 539           fi
 540         else
 541           shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
 542           shlib_slibdir_qual="/$os_multilib_base"
 543         fi
 544       fi
 545       echo "    $SHLIB_INSTALL" \
 546         | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
 547               -e "s%@shlib_so_name@%$shlib_so_name%g" \
 548               -e "s%@shlib_dir@%$shlib_dir%g" \
 549               -e "s%@shlib_slibdir_qual@%$shlib_slibdir_qual%g"
 550     elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
 551       shlib_base_name="libgcc_s";
 552       echo "    $SHLIB_INSTALL" \
 553         | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
 554               -e "s%@shlib_so_name@%$shlib_base_name%g" \
 555               -e "s%@shlib_dir@%%g" \
 556               -e "s%@shlib_slibdir_qual@%%g"
 557     fi
 558   fi
 559 done
 560 for f in $EXTRA_MULTILIB_PARTS; do
 561   for ml in $MULTILIBS; do
 562     dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
 563     if [ $dir != . ]; then
 564       out=${dir}/$f
 565       ldir='$(DESTDIR)$(libsubdir)'/$dir
 566     else
 567       out=$f
 568       ldir='$(DESTDIR)$(libsubdir)'
 569     fi
 570     echo '      $(INSTALL_DATA)' $out $ldir/
 571   done
 572 done