2008-05-30 Vladimir Makarov <vmakarov@redhat.com>
[official-gcc.git] / libcpp / expr.c
blob2e52617a6568ab09c42513b53944301019d7b0e0
1 /* Parse C expressions for cpplib.
2 Copyright (C) 1987, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2001,
3 2002, 2004, 2008 Free Software Foundation.
4 Contributed by Per Bothner, 1994.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms of the GNU General Public License as published by the
8 Free Software Foundation; either version 2, or (at your option) any
9 later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, 51 Franklin Street, Fifth Floor,
19 Boston, MA 02110-1301, USA. */
21 #include "config.h"
22 #include "system.h"
23 #include "cpplib.h"
24 #include "internal.h"
26 #define PART_PRECISION (sizeof (cpp_num_part) * CHAR_BIT)
27 #define HALF_MASK (~(cpp_num_part) 0 >> (PART_PRECISION / 2))
28 #define LOW_PART(num_part) (num_part & HALF_MASK)
29 #define HIGH_PART(num_part) (num_part >> (PART_PRECISION / 2))
31 struct op
33 const cpp_token *token; /* The token forming op (for diagnostics). */
34 cpp_num value; /* The value logically "right" of op. */
35 enum cpp_ttype op;
38 /* Some simple utility routines on double integers. */
39 #define num_zerop(num) ((num.low | num.high) == 0)
40 #define num_eq(num1, num2) (num1.low == num2.low && num1.high == num2.high)
41 static bool num_positive (cpp_num, size_t);
42 static bool num_greater_eq (cpp_num, cpp_num, size_t);
43 static cpp_num num_trim (cpp_num, size_t);
44 static cpp_num num_part_mul (cpp_num_part, cpp_num_part);
46 static cpp_num num_unary_op (cpp_reader *, cpp_num, enum cpp_ttype);
47 static cpp_num num_binary_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype);
48 static cpp_num num_negate (cpp_num, size_t);
49 static cpp_num num_bitwise_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype);
50 static cpp_num num_inequality_op (cpp_reader *, cpp_num, cpp_num,
51 enum cpp_ttype);
52 static cpp_num num_equality_op (cpp_reader *, cpp_num, cpp_num,
53 enum cpp_ttype);
54 static cpp_num num_mul (cpp_reader *, cpp_num, cpp_num);
55 static cpp_num num_div_op (cpp_reader *, cpp_num, cpp_num, enum cpp_ttype);
56 static cpp_num num_lshift (cpp_num, size_t, size_t);
57 static cpp_num num_rshift (cpp_num, size_t, size_t);
59 static cpp_num append_digit (cpp_num, int, int, size_t);
60 static cpp_num parse_defined (cpp_reader *);
61 static cpp_num eval_token (cpp_reader *, const cpp_token *);
62 static struct op *reduce (cpp_reader *, struct op *, enum cpp_ttype);
63 static unsigned int interpret_float_suffix (const uchar *, size_t);
64 static unsigned int interpret_int_suffix (const uchar *, size_t);
65 static void check_promotion (cpp_reader *, const struct op *);
67 /* Token type abuse to create unary plus and minus operators. */
68 #define CPP_UPLUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 1))
69 #define CPP_UMINUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 2))
71 /* With -O2, gcc appears to produce nice code, moving the error
72 message load and subsequent jump completely out of the main path. */
73 #define SYNTAX_ERROR(msgid) \
74 do { cpp_error (pfile, CPP_DL_ERROR, msgid); goto syntax_error; } while(0)
75 #define SYNTAX_ERROR2(msgid, arg) \
76 do { cpp_error (pfile, CPP_DL_ERROR, msgid, arg); goto syntax_error; } \
77 while(0)
79 /* Subroutine of cpp_classify_number. S points to a float suffix of
80 length LEN, possibly zero. Returns 0 for an invalid suffix, or a
81 flag vector describing the suffix. */
82 static unsigned int
83 interpret_float_suffix (const uchar *s, size_t len)
85 size_t f, l, w, q, i, d;
86 size_t r, k, u, h;
88 f = l = w = q = i = d = 0;
89 r = k = u = h = 0;
91 while (len--)
92 switch (s[len])
94 case 'r': case 'R': r++; break;
95 case 'k': case 'K': k++; break;
96 case 'u': case 'U': u++; break;
97 case 'h': case 'H': h++; break;
98 case 'f': case 'F':
99 if (d > 0)
100 return 0;
101 f++;
102 break;
103 case 'l': case 'L':
104 if (d > 0)
105 return 0;
106 l++;
107 /* If there are two Ls, they must be adjacent and the same case. */
108 if (l == 2 && s[len] != s[len + 1])
109 return 0;
110 break;
111 case 'w': case 'W':
112 if (d > 0)
113 return 0;
114 w++;
115 break;
116 case 'q': case 'Q':
117 if (d > 0)
118 return 0;
119 q++;
120 break;
121 case 'i': case 'I':
122 case 'j': case 'J': i++; break;
123 case 'd': case 'D': d++; break;
124 default:
125 return 0;
128 if (r + k > 1 || h > 1 || l > 2 || u > 1)
129 return 0;
131 if (r == 1)
133 if (f || i || d || w || q)
134 return 0;
136 return (CPP_N_FRACT
137 | (u ? CPP_N_UNSIGNED : 0)
138 | (h ? CPP_N_SMALL :
139 l == 2 ? CPP_N_LARGE :
140 l == 1 ? CPP_N_MEDIUM : 0));
143 if (k == 1)
145 if (f || i || d || w || q)
146 return 0;
148 return (CPP_N_ACCUM
149 | (u ? CPP_N_UNSIGNED : 0)
150 | (h ? CPP_N_SMALL :
151 l == 2 ? CPP_N_LARGE :
152 l == 1 ? CPP_N_MEDIUM : 0));
155 if (f + l + w + q > 1 || i > 1 || h + u > 0)
156 return 0;
158 /* Allow dd, df, dl suffixes for decimal float constants. */
159 if (d && ((d + f + l != 2) || i))
160 return 0;
162 return ((i ? CPP_N_IMAGINARY : 0)
163 | (f ? CPP_N_SMALL :
164 l ? CPP_N_LARGE :
165 w ? CPP_N_MD_W :
166 q ? CPP_N_MD_Q : CPP_N_MEDIUM)
167 | (d ? CPP_N_DFLOAT : 0));
170 /* Subroutine of cpp_classify_number. S points to an integer suffix
171 of length LEN, possibly zero. Returns 0 for an invalid suffix, or a
172 flag vector describing the suffix. */
173 static unsigned int
174 interpret_int_suffix (const uchar *s, size_t len)
176 size_t u, l, i;
178 u = l = i = 0;
180 while (len--)
181 switch (s[len])
183 case 'u': case 'U': u++; break;
184 case 'i': case 'I':
185 case 'j': case 'J': i++; break;
186 case 'l': case 'L': l++;
187 /* If there are two Ls, they must be adjacent and the same case. */
188 if (l == 2 && s[len] != s[len + 1])
189 return 0;
190 break;
191 default:
192 return 0;
195 if (l > 2 || u > 1 || i > 1)
196 return 0;
198 return ((i ? CPP_N_IMAGINARY : 0)
199 | (u ? CPP_N_UNSIGNED : 0)
200 | ((l == 0) ? CPP_N_SMALL
201 : (l == 1) ? CPP_N_MEDIUM : CPP_N_LARGE));
204 /* Categorize numeric constants according to their field (integer,
205 floating point, or invalid), radix (decimal, octal, hexadecimal),
206 and type suffixes. */
207 unsigned int
208 cpp_classify_number (cpp_reader *pfile, const cpp_token *token)
210 const uchar *str = token->val.str.text;
211 const uchar *limit;
212 unsigned int max_digit, result, radix;
213 enum {NOT_FLOAT = 0, AFTER_POINT, AFTER_EXPON} float_flag;
215 /* If the lexer has done its job, length one can only be a single
216 digit. Fast-path this very common case. */
217 if (token->val.str.len == 1)
218 return CPP_N_INTEGER | CPP_N_SMALL | CPP_N_DECIMAL;
220 limit = str + token->val.str.len;
221 float_flag = NOT_FLOAT;
222 max_digit = 0;
223 radix = 10;
225 /* First, interpret the radix. */
226 if (*str == '0')
228 radix = 8;
229 str++;
231 /* Require at least one hex digit to classify it as hex. */
232 if ((*str == 'x' || *str == 'X')
233 && (str[1] == '.' || ISXDIGIT (str[1])))
235 radix = 16;
236 str++;
238 else if ((*str == 'b' || *str == 'B') && (str[1] == '0' || str[1] == '1'))
240 radix = 2;
241 str++;
245 /* Now scan for a well-formed integer or float. */
246 for (;;)
248 unsigned int c = *str++;
250 if (ISDIGIT (c) || (ISXDIGIT (c) && radix == 16))
252 c = hex_value (c);
253 if (c > max_digit)
254 max_digit = c;
256 else if (c == '.')
258 if (float_flag == NOT_FLOAT)
259 float_flag = AFTER_POINT;
260 else
261 SYNTAX_ERROR ("too many decimal points in number");
263 else if ((radix <= 10 && (c == 'e' || c == 'E'))
264 || (radix == 16 && (c == 'p' || c == 'P')))
266 float_flag = AFTER_EXPON;
267 break;
269 else
271 /* Start of suffix. */
272 str--;
273 break;
277 /* The suffix may be for decimal fixed-point constants without exponent. */
278 if (radix != 16 && float_flag == NOT_FLOAT)
280 result = interpret_float_suffix (str, limit - str);
281 if ((result & CPP_N_FRACT) || (result & CPP_N_ACCUM))
283 result |= CPP_N_FLOATING;
284 /* We need to restore the radix to 10, if the radix is 8. */
285 if (radix == 8)
286 radix = 10;
288 if (CPP_PEDANTIC (pfile))
289 cpp_error (pfile, CPP_DL_PEDWARN,
290 "fixed-point constants are a GCC extension");
291 goto syntax_ok;
293 else
294 result = 0;
297 if (float_flag != NOT_FLOAT && radix == 8)
298 radix = 10;
300 if (max_digit >= radix)
302 if (radix == 2)
303 SYNTAX_ERROR2 ("invalid digit \"%c\" in binary constant", '0' + max_digit);
304 else
305 SYNTAX_ERROR2 ("invalid digit \"%c\" in octal constant", '0' + max_digit);
308 if (float_flag != NOT_FLOAT)
310 if (radix == 2)
312 cpp_error (pfile, CPP_DL_ERROR,
313 "invalid prefix \"0b\" for floating constant");
314 return CPP_N_INVALID;
317 if (radix == 16 && CPP_PEDANTIC (pfile) && !CPP_OPTION (pfile, c99))
318 cpp_error (pfile, CPP_DL_PEDWARN,
319 "use of C99 hexadecimal floating constant");
321 if (float_flag == AFTER_EXPON)
323 if (*str == '+' || *str == '-')
324 str++;
326 /* Exponent is decimal, even if string is a hex float. */
327 if (!ISDIGIT (*str))
328 SYNTAX_ERROR ("exponent has no digits");
331 str++;
332 while (ISDIGIT (*str));
334 else if (radix == 16)
335 SYNTAX_ERROR ("hexadecimal floating constants require an exponent");
337 result = interpret_float_suffix (str, limit - str);
338 if (result == 0)
340 cpp_error (pfile, CPP_DL_ERROR,
341 "invalid suffix \"%.*s\" on floating constant",
342 (int) (limit - str), str);
343 return CPP_N_INVALID;
346 /* Traditional C didn't accept any floating suffixes. */
347 if (limit != str
348 && CPP_WTRADITIONAL (pfile)
349 && ! cpp_sys_macro_p (pfile))
350 cpp_error (pfile, CPP_DL_WARNING,
351 "traditional C rejects the \"%.*s\" suffix",
352 (int) (limit - str), str);
354 /* Radix must be 10 for decimal floats. */
355 if ((result & CPP_N_DFLOAT) && radix != 10)
357 cpp_error (pfile, CPP_DL_ERROR,
358 "invalid suffix \"%.*s\" with hexadecimal floating constant",
359 (int) (limit - str), str);
360 return CPP_N_INVALID;
363 if ((result & (CPP_N_FRACT | CPP_N_ACCUM)) && CPP_PEDANTIC (pfile))
364 cpp_error (pfile, CPP_DL_PEDWARN,
365 "fixed-point constants are a GCC extension");
367 if ((result & CPP_N_DFLOAT) && CPP_PEDANTIC (pfile))
368 cpp_error (pfile, CPP_DL_PEDWARN,
369 "decimal float constants are a GCC extension");
371 result |= CPP_N_FLOATING;
373 else
375 result = interpret_int_suffix (str, limit - str);
376 if (result == 0)
378 cpp_error (pfile, CPP_DL_ERROR,
379 "invalid suffix \"%.*s\" on integer constant",
380 (int) (limit - str), str);
381 return CPP_N_INVALID;
384 /* Traditional C only accepted the 'L' suffix.
385 Suppress warning about 'LL' with -Wno-long-long. */
386 if (CPP_WTRADITIONAL (pfile) && ! cpp_sys_macro_p (pfile))
388 int u_or_i = (result & (CPP_N_UNSIGNED|CPP_N_IMAGINARY));
389 int large = (result & CPP_N_WIDTH) == CPP_N_LARGE;
391 if (u_or_i || (large && CPP_OPTION (pfile, warn_long_long)))
392 cpp_error (pfile, CPP_DL_WARNING,
393 "traditional C rejects the \"%.*s\" suffix",
394 (int) (limit - str), str);
397 if ((result & CPP_N_WIDTH) == CPP_N_LARGE
398 && ! CPP_OPTION (pfile, c99)
399 && CPP_OPTION (pfile, warn_long_long))
400 cpp_error (pfile, CPP_DL_PEDWARN,
401 "use of C99 long long integer constant");
403 result |= CPP_N_INTEGER;
406 syntax_ok:
407 if ((result & CPP_N_IMAGINARY) && CPP_PEDANTIC (pfile))
408 cpp_error (pfile, CPP_DL_PEDWARN,
409 "imaginary constants are a GCC extension");
410 if (radix == 2 && CPP_PEDANTIC (pfile))
411 cpp_error (pfile, CPP_DL_PEDWARN,
412 "binary constants are a GCC extension");
414 if (radix == 10)
415 result |= CPP_N_DECIMAL;
416 else if (radix == 16)
417 result |= CPP_N_HEX;
418 else if (radix == 2)
419 result |= CPP_N_BINARY;
420 else
421 result |= CPP_N_OCTAL;
423 return result;
425 syntax_error:
426 return CPP_N_INVALID;
429 /* cpp_interpret_integer converts an integer constant into a cpp_num,
430 of precision options->precision.
432 We do not provide any interface for decimal->float conversion,
433 because the preprocessor doesn't need it and we don't want to
434 drag in GCC's floating point emulator. */
435 cpp_num
436 cpp_interpret_integer (cpp_reader *pfile, const cpp_token *token,
437 unsigned int type)
439 const uchar *p, *end;
440 cpp_num result;
442 result.low = 0;
443 result.high = 0;
444 result.unsignedp = !!(type & CPP_N_UNSIGNED);
445 result.overflow = false;
447 p = token->val.str.text;
448 end = p + token->val.str.len;
450 /* Common case of a single digit. */
451 if (token->val.str.len == 1)
452 result.low = p[0] - '0';
453 else
455 cpp_num_part max;
456 size_t precision = CPP_OPTION (pfile, precision);
457 unsigned int base = 10, c = 0;
458 bool overflow = false;
460 if ((type & CPP_N_RADIX) == CPP_N_OCTAL)
462 base = 8;
463 p++;
465 else if ((type & CPP_N_RADIX) == CPP_N_HEX)
467 base = 16;
468 p += 2;
470 else if ((type & CPP_N_RADIX) == CPP_N_BINARY)
472 base = 2;
473 p += 2;
476 /* We can add a digit to numbers strictly less than this without
477 needing the precision and slowness of double integers. */
478 max = ~(cpp_num_part) 0;
479 if (precision < PART_PRECISION)
480 max >>= PART_PRECISION - precision;
481 max = (max - base + 1) / base + 1;
483 for (; p < end; p++)
485 c = *p;
487 if (ISDIGIT (c) || (base == 16 && ISXDIGIT (c)))
488 c = hex_value (c);
489 else
490 break;
492 /* Strict inequality for when max is set to zero. */
493 if (result.low < max)
494 result.low = result.low * base + c;
495 else
497 result = append_digit (result, c, base, precision);
498 overflow |= result.overflow;
499 max = 0;
503 if (overflow)
504 cpp_error (pfile, CPP_DL_PEDWARN,
505 "integer constant is too large for its type");
506 /* If too big to be signed, consider it unsigned. Only warn for
507 decimal numbers. Traditional numbers were always signed (but
508 we still honor an explicit U suffix); but we only have
509 traditional semantics in directives. */
510 else if (!result.unsignedp
511 && !(CPP_OPTION (pfile, traditional)
512 && pfile->state.in_directive)
513 && !num_positive (result, precision))
515 if (base == 10)
516 cpp_error (pfile, CPP_DL_WARNING,
517 "integer constant is so large that it is unsigned");
518 result.unsignedp = true;
522 return result;
525 /* Append DIGIT to NUM, a number of PRECISION bits being read in base BASE. */
526 static cpp_num
527 append_digit (cpp_num num, int digit, int base, size_t precision)
529 cpp_num result;
530 unsigned int shift;
531 bool overflow;
532 cpp_num_part add_high, add_low;
534 /* Multiply by 2, 8 or 16. Catching this overflow here means we don't
535 need to worry about add_high overflowing. */
536 switch (base)
538 case 2:
539 shift = 1;
540 break;
542 case 16:
543 shift = 4;
544 break;
546 default:
547 shift = 3;
549 overflow = !!(num.high >> (PART_PRECISION - shift));
550 result.high = num.high << shift;
551 result.low = num.low << shift;
552 result.high |= num.low >> (PART_PRECISION - shift);
553 result.unsignedp = num.unsignedp;
555 if (base == 10)
557 add_low = num.low << 1;
558 add_high = (num.high << 1) + (num.low >> (PART_PRECISION - 1));
560 else
561 add_high = add_low = 0;
563 if (add_low + digit < add_low)
564 add_high++;
565 add_low += digit;
567 if (result.low + add_low < result.low)
568 add_high++;
569 if (result.high + add_high < result.high)
570 overflow = true;
572 result.low += add_low;
573 result.high += add_high;
574 result.overflow = overflow;
576 /* The above code catches overflow of a cpp_num type. This catches
577 overflow of the (possibly shorter) target precision. */
578 num.low = result.low;
579 num.high = result.high;
580 result = num_trim (result, precision);
581 if (!num_eq (result, num))
582 result.overflow = true;
584 return result;
587 /* Handle meeting "defined" in a preprocessor expression. */
588 static cpp_num
589 parse_defined (cpp_reader *pfile)
591 cpp_num result;
592 int paren = 0;
593 cpp_hashnode *node = 0;
594 const cpp_token *token;
595 cpp_context *initial_context = pfile->context;
597 /* Don't expand macros. */
598 pfile->state.prevent_expansion++;
600 token = cpp_get_token (pfile);
601 if (token->type == CPP_OPEN_PAREN)
603 paren = 1;
604 token = cpp_get_token (pfile);
607 if (token->type == CPP_NAME)
609 node = token->val.node;
610 if (paren && cpp_get_token (pfile)->type != CPP_CLOSE_PAREN)
612 cpp_error (pfile, CPP_DL_ERROR, "missing ')' after \"defined\"");
613 node = 0;
616 else
618 cpp_error (pfile, CPP_DL_ERROR,
619 "operator \"defined\" requires an identifier");
620 if (token->flags & NAMED_OP)
622 cpp_token op;
624 op.flags = 0;
625 op.type = token->type;
626 cpp_error (pfile, CPP_DL_ERROR,
627 "(\"%s\" is an alternative token for \"%s\" in C++)",
628 cpp_token_as_text (pfile, token),
629 cpp_token_as_text (pfile, &op));
633 if (node)
635 if (pfile->context != initial_context && CPP_PEDANTIC (pfile))
636 cpp_error (pfile, CPP_DL_WARNING,
637 "this use of \"defined\" may not be portable");
639 _cpp_mark_macro_used (node);
640 if (!(node->flags & NODE_USED))
642 node->flags |= NODE_USED;
643 if (node->type == NT_MACRO)
645 if (pfile->cb.used_define)
646 pfile->cb.used_define (pfile, pfile->directive_line, node);
648 else
650 if (pfile->cb.used_undef)
651 pfile->cb.used_undef (pfile, pfile->directive_line, node);
655 /* A possible controlling macro of the form #if !defined ().
656 _cpp_parse_expr checks there was no other junk on the line. */
657 pfile->mi_ind_cmacro = node;
660 pfile->state.prevent_expansion--;
662 result.unsignedp = false;
663 result.high = 0;
664 result.overflow = false;
665 result.low = node && node->type == NT_MACRO;
666 return result;
669 /* Convert a token into a CPP_NUMBER (an interpreted preprocessing
670 number or character constant, or the result of the "defined" or "#"
671 operators). */
672 static cpp_num
673 eval_token (cpp_reader *pfile, const cpp_token *token)
675 cpp_num result;
676 unsigned int temp;
677 int unsignedp = 0;
679 result.unsignedp = false;
680 result.overflow = false;
682 switch (token->type)
684 case CPP_NUMBER:
685 temp = cpp_classify_number (pfile, token);
686 switch (temp & CPP_N_CATEGORY)
688 case CPP_N_FLOATING:
689 cpp_error (pfile, CPP_DL_ERROR,
690 "floating constant in preprocessor expression");
691 break;
692 case CPP_N_INTEGER:
693 if (!(temp & CPP_N_IMAGINARY))
694 return cpp_interpret_integer (pfile, token, temp);
695 cpp_error (pfile, CPP_DL_ERROR,
696 "imaginary number in preprocessor expression");
697 break;
699 case CPP_N_INVALID:
700 /* Error already issued. */
701 break;
703 result.high = result.low = 0;
704 break;
706 case CPP_WCHAR:
707 case CPP_CHAR:
708 case CPP_CHAR16:
709 case CPP_CHAR32:
711 cppchar_t cc = cpp_interpret_charconst (pfile, token,
712 &temp, &unsignedp);
714 result.high = 0;
715 result.low = cc;
716 /* Sign-extend the result if necessary. */
717 if (!unsignedp && (cppchar_signed_t) cc < 0)
719 if (PART_PRECISION > BITS_PER_CPPCHAR_T)
720 result.low |= ~(~(cpp_num_part) 0
721 >> (PART_PRECISION - BITS_PER_CPPCHAR_T));
722 result.high = ~(cpp_num_part) 0;
723 result = num_trim (result, CPP_OPTION (pfile, precision));
726 break;
728 case CPP_NAME:
729 if (token->val.node == pfile->spec_nodes.n_defined)
730 return parse_defined (pfile);
731 else if (CPP_OPTION (pfile, cplusplus)
732 && (token->val.node == pfile->spec_nodes.n_true
733 || token->val.node == pfile->spec_nodes.n_false))
735 result.high = 0;
736 result.low = (token->val.node == pfile->spec_nodes.n_true);
738 else
740 result.high = 0;
741 result.low = 0;
742 if (CPP_OPTION (pfile, warn_undef) && !pfile->state.skip_eval)
743 cpp_error (pfile, CPP_DL_WARNING, "\"%s\" is not defined",
744 NODE_NAME (token->val.node));
746 break;
748 case CPP_HASH:
749 if (!pfile->state.skipping)
751 /* A pedantic warning takes precedence over a deprecated
752 warning here. */
753 if (CPP_PEDANTIC (pfile))
754 cpp_error (pfile, CPP_DL_PEDWARN,
755 "assertions are a GCC extension");
756 else if (CPP_OPTION (pfile, warn_deprecated))
757 cpp_error (pfile, CPP_DL_WARNING,
758 "assertions are a deprecated extension");
760 _cpp_test_assertion (pfile, &temp);
761 result.high = 0;
762 result.low = temp;
763 break;
765 default:
766 abort ();
769 result.unsignedp = !!unsignedp;
770 return result;
773 /* Operator precedence and flags table.
775 After an operator is returned from the lexer, if it has priority less
776 than the operator on the top of the stack, we reduce the stack by one
777 operator and repeat the test. Since equal priorities do not reduce,
778 this is naturally right-associative.
780 We handle left-associative operators by decrementing the priority of
781 just-lexed operators by one, but retaining the priority of operators
782 already on the stack.
784 The remaining cases are '(' and ')'. We handle '(' by skipping the
785 reduction phase completely. ')' is given lower priority than
786 everything else, including '(', effectively forcing a reduction of the
787 parenthesized expression. If there is a matching '(', the routine
788 reduce() exits immediately. If the normal exit route sees a ')', then
789 there cannot have been a matching '(' and an error message is output.
791 The parser assumes all shifted operators require a left operand unless
792 the flag NO_L_OPERAND is set. These semantics are automatic; any
793 extra semantics need to be handled with operator-specific code. */
795 /* Flags. If CHECK_PROMOTION, we warn if the effective sign of an
796 operand changes because of integer promotions. */
797 #define NO_L_OPERAND (1 << 0)
798 #define LEFT_ASSOC (1 << 1)
799 #define CHECK_PROMOTION (1 << 2)
801 /* Operator to priority map. Must be in the same order as the first
802 N entries of enum cpp_ttype. */
803 static const struct cpp_operator
805 uchar prio;
806 uchar flags;
807 } optab[] =
809 /* EQ */ {0, 0}, /* Shouldn't happen. */
810 /* NOT */ {16, NO_L_OPERAND},
811 /* GREATER */ {12, LEFT_ASSOC | CHECK_PROMOTION},
812 /* LESS */ {12, LEFT_ASSOC | CHECK_PROMOTION},
813 /* PLUS */ {14, LEFT_ASSOC | CHECK_PROMOTION},
814 /* MINUS */ {14, LEFT_ASSOC | CHECK_PROMOTION},
815 /* MULT */ {15, LEFT_ASSOC | CHECK_PROMOTION},
816 /* DIV */ {15, LEFT_ASSOC | CHECK_PROMOTION},
817 /* MOD */ {15, LEFT_ASSOC | CHECK_PROMOTION},
818 /* AND */ {9, LEFT_ASSOC | CHECK_PROMOTION},
819 /* OR */ {7, LEFT_ASSOC | CHECK_PROMOTION},
820 /* XOR */ {8, LEFT_ASSOC | CHECK_PROMOTION},
821 /* RSHIFT */ {13, LEFT_ASSOC},
822 /* LSHIFT */ {13, LEFT_ASSOC},
824 /* COMPL */ {16, NO_L_OPERAND},
825 /* AND_AND */ {6, LEFT_ASSOC},
826 /* OR_OR */ {5, LEFT_ASSOC},
827 /* Note that QUERY, COLON, and COMMA must have the same precedence.
828 However, there are some special cases for these in reduce(). */
829 /* QUERY */ {4, 0},
830 /* COLON */ {4, LEFT_ASSOC | CHECK_PROMOTION},
831 /* COMMA */ {4, LEFT_ASSOC},
832 /* OPEN_PAREN */ {1, NO_L_OPERAND},
833 /* CLOSE_PAREN */ {0, 0},
834 /* EOF */ {0, 0},
835 /* EQ_EQ */ {11, LEFT_ASSOC},
836 /* NOT_EQ */ {11, LEFT_ASSOC},
837 /* GREATER_EQ */ {12, LEFT_ASSOC | CHECK_PROMOTION},
838 /* LESS_EQ */ {12, LEFT_ASSOC | CHECK_PROMOTION},
839 /* UPLUS */ {16, NO_L_OPERAND},
840 /* UMINUS */ {16, NO_L_OPERAND}
843 /* Parse and evaluate a C expression, reading from PFILE.
844 Returns the truth value of the expression.
846 The implementation is an operator precedence parser, i.e. a
847 bottom-up parser, using a stack for not-yet-reduced tokens.
849 The stack base is op_stack, and the current stack pointer is 'top'.
850 There is a stack element for each operator (only), and the most
851 recently pushed operator is 'top->op'. An operand (value) is
852 stored in the 'value' field of the stack element of the operator
853 that precedes it. */
854 bool
855 _cpp_parse_expr (cpp_reader *pfile)
857 struct op *top = pfile->op_stack;
858 unsigned int lex_count;
859 bool saw_leading_not, want_value = true;
861 pfile->state.skip_eval = 0;
863 /* Set up detection of #if ! defined(). */
864 pfile->mi_ind_cmacro = 0;
865 saw_leading_not = false;
866 lex_count = 0;
868 /* Lowest priority operator prevents further reductions. */
869 top->op = CPP_EOF;
871 for (;;)
873 struct op op;
875 lex_count++;
876 op.token = cpp_get_token (pfile);
877 op.op = op.token->type;
879 switch (op.op)
881 /* These tokens convert into values. */
882 case CPP_NUMBER:
883 case CPP_CHAR:
884 case CPP_WCHAR:
885 case CPP_CHAR16:
886 case CPP_CHAR32:
887 case CPP_NAME:
888 case CPP_HASH:
889 if (!want_value)
890 SYNTAX_ERROR2 ("missing binary operator before token \"%s\"",
891 cpp_token_as_text (pfile, op.token));
892 want_value = false;
893 top->value = eval_token (pfile, op.token);
894 continue;
896 case CPP_NOT:
897 saw_leading_not = lex_count == 1;
898 break;
899 case CPP_PLUS:
900 if (want_value)
901 op.op = CPP_UPLUS;
902 break;
903 case CPP_MINUS:
904 if (want_value)
905 op.op = CPP_UMINUS;
906 break;
908 default:
909 if ((int) op.op <= (int) CPP_EQ || (int) op.op >= (int) CPP_PLUS_EQ)
910 SYNTAX_ERROR2 ("token \"%s\" is not valid in preprocessor expressions",
911 cpp_token_as_text (pfile, op.token));
912 break;
915 /* Check we have a value or operator as appropriate. */
916 if (optab[op.op].flags & NO_L_OPERAND)
918 if (!want_value)
919 SYNTAX_ERROR2 ("missing binary operator before token \"%s\"",
920 cpp_token_as_text (pfile, op.token));
922 else if (want_value)
924 /* We want a number (or expression) and haven't got one.
925 Try to emit a specific diagnostic. */
926 if (op.op == CPP_CLOSE_PAREN && top->op == CPP_OPEN_PAREN)
927 SYNTAX_ERROR ("missing expression between '(' and ')'");
929 if (op.op == CPP_EOF && top->op == CPP_EOF)
930 SYNTAX_ERROR ("#if with no expression");
932 if (top->op != CPP_EOF && top->op != CPP_OPEN_PAREN)
933 SYNTAX_ERROR2 ("operator '%s' has no right operand",
934 cpp_token_as_text (pfile, top->token));
935 else if (op.op == CPP_CLOSE_PAREN || op.op == CPP_EOF)
936 /* Complain about missing paren during reduction. */;
937 else
938 SYNTAX_ERROR2 ("operator '%s' has no left operand",
939 cpp_token_as_text (pfile, op.token));
942 top = reduce (pfile, top, op.op);
943 if (!top)
944 goto syntax_error;
946 if (op.op == CPP_EOF)
947 break;
949 switch (op.op)
951 case CPP_CLOSE_PAREN:
952 continue;
953 case CPP_OR_OR:
954 if (!num_zerop (top->value))
955 pfile->state.skip_eval++;
956 break;
957 case CPP_AND_AND:
958 case CPP_QUERY:
959 if (num_zerop (top->value))
960 pfile->state.skip_eval++;
961 break;
962 case CPP_COLON:
963 if (top->op != CPP_QUERY)
964 SYNTAX_ERROR (" ':' without preceding '?'");
965 if (!num_zerop (top[-1].value)) /* Was '?' condition true? */
966 pfile->state.skip_eval++;
967 else
968 pfile->state.skip_eval--;
969 default:
970 break;
973 want_value = true;
975 /* Check for and handle stack overflow. */
976 if (++top == pfile->op_limit)
977 top = _cpp_expand_op_stack (pfile);
979 top->op = op.op;
980 top->token = op.token;
983 /* The controlling macro expression is only valid if we called lex 3
984 times: <!> <defined expression> and <EOF>. push_conditional ()
985 checks that we are at top-of-file. */
986 if (pfile->mi_ind_cmacro && !(saw_leading_not && lex_count == 3))
987 pfile->mi_ind_cmacro = 0;
989 if (top != pfile->op_stack)
991 cpp_error (pfile, CPP_DL_ICE, "unbalanced stack in #if");
992 syntax_error:
993 return false; /* Return false on syntax error. */
996 return !num_zerop (top->value);
999 /* Reduce the operator / value stack if possible, in preparation for
1000 pushing operator OP. Returns NULL on error, otherwise the top of
1001 the stack. */
1002 static struct op *
1003 reduce (cpp_reader *pfile, struct op *top, enum cpp_ttype op)
1005 unsigned int prio;
1007 if (top->op <= CPP_EQ || top->op > CPP_LAST_CPP_OP + 2)
1009 bad_op:
1010 cpp_error (pfile, CPP_DL_ICE, "impossible operator '%u'", top->op);
1011 return 0;
1014 if (op == CPP_OPEN_PAREN)
1015 return top;
1017 /* Decrement the priority of left-associative operators to force a
1018 reduction with operators of otherwise equal priority. */
1019 prio = optab[op].prio - ((optab[op].flags & LEFT_ASSOC) != 0);
1020 while (prio < optab[top->op].prio)
1022 if (CPP_OPTION (pfile, warn_num_sign_change)
1023 && optab[top->op].flags & CHECK_PROMOTION)
1024 check_promotion (pfile, top);
1026 switch (top->op)
1028 case CPP_UPLUS:
1029 case CPP_UMINUS:
1030 case CPP_NOT:
1031 case CPP_COMPL:
1032 top[-1].value = num_unary_op (pfile, top->value, top->op);
1033 break;
1035 case CPP_PLUS:
1036 case CPP_MINUS:
1037 case CPP_RSHIFT:
1038 case CPP_LSHIFT:
1039 case CPP_COMMA:
1040 top[-1].value = num_binary_op (pfile, top[-1].value,
1041 top->value, top->op);
1042 break;
1044 case CPP_GREATER:
1045 case CPP_LESS:
1046 case CPP_GREATER_EQ:
1047 case CPP_LESS_EQ:
1048 top[-1].value
1049 = num_inequality_op (pfile, top[-1].value, top->value, top->op);
1050 break;
1052 case CPP_EQ_EQ:
1053 case CPP_NOT_EQ:
1054 top[-1].value
1055 = num_equality_op (pfile, top[-1].value, top->value, top->op);
1056 break;
1058 case CPP_AND:
1059 case CPP_OR:
1060 case CPP_XOR:
1061 top[-1].value
1062 = num_bitwise_op (pfile, top[-1].value, top->value, top->op);
1063 break;
1065 case CPP_MULT:
1066 top[-1].value = num_mul (pfile, top[-1].value, top->value);
1067 break;
1069 case CPP_DIV:
1070 case CPP_MOD:
1071 top[-1].value = num_div_op (pfile, top[-1].value,
1072 top->value, top->op);
1073 break;
1075 case CPP_OR_OR:
1076 top--;
1077 if (!num_zerop (top->value))
1078 pfile->state.skip_eval--;
1079 top->value.low = (!num_zerop (top->value)
1080 || !num_zerop (top[1].value));
1081 top->value.high = 0;
1082 top->value.unsignedp = false;
1083 top->value.overflow = false;
1084 continue;
1086 case CPP_AND_AND:
1087 top--;
1088 if (num_zerop (top->value))
1089 pfile->state.skip_eval--;
1090 top->value.low = (!num_zerop (top->value)
1091 && !num_zerop (top[1].value));
1092 top->value.high = 0;
1093 top->value.unsignedp = false;
1094 top->value.overflow = false;
1095 continue;
1097 case CPP_OPEN_PAREN:
1098 if (op != CPP_CLOSE_PAREN)
1100 cpp_error (pfile, CPP_DL_ERROR, "missing ')' in expression");
1101 return 0;
1103 top--;
1104 top->value = top[1].value;
1105 return top;
1107 case CPP_COLON:
1108 top -= 2;
1109 if (!num_zerop (top->value))
1111 pfile->state.skip_eval--;
1112 top->value = top[1].value;
1114 else
1115 top->value = top[2].value;
1116 top->value.unsignedp = (top[1].value.unsignedp
1117 || top[2].value.unsignedp);
1118 continue;
1120 case CPP_QUERY:
1121 /* COMMA and COLON should not reduce a QUERY operator. */
1122 if (op == CPP_COMMA || op == CPP_COLON)
1123 return top;
1124 cpp_error (pfile, CPP_DL_ERROR, "'?' without following ':'");
1125 return 0;
1127 default:
1128 goto bad_op;
1131 top--;
1132 if (top->value.overflow && !pfile->state.skip_eval)
1133 cpp_error (pfile, CPP_DL_PEDWARN,
1134 "integer overflow in preprocessor expression");
1137 if (op == CPP_CLOSE_PAREN)
1139 cpp_error (pfile, CPP_DL_ERROR, "missing '(' in expression");
1140 return 0;
1143 return top;
1146 /* Returns the position of the old top of stack after expansion. */
1147 struct op *
1148 _cpp_expand_op_stack (cpp_reader *pfile)
1150 size_t old_size = (size_t) (pfile->op_limit - pfile->op_stack);
1151 size_t new_size = old_size * 2 + 20;
1153 pfile->op_stack = XRESIZEVEC (struct op, pfile->op_stack, new_size);
1154 pfile->op_limit = pfile->op_stack + new_size;
1156 return pfile->op_stack + old_size;
1159 /* Emits a warning if the effective sign of either operand of OP
1160 changes because of integer promotions. */
1161 static void
1162 check_promotion (cpp_reader *pfile, const struct op *op)
1164 if (op->value.unsignedp == op[-1].value.unsignedp)
1165 return;
1167 if (op->value.unsignedp)
1169 if (!num_positive (op[-1].value, CPP_OPTION (pfile, precision)))
1170 cpp_error (pfile, CPP_DL_WARNING,
1171 "the left operand of \"%s\" changes sign when promoted",
1172 cpp_token_as_text (pfile, op->token));
1174 else if (!num_positive (op->value, CPP_OPTION (pfile, precision)))
1175 cpp_error (pfile, CPP_DL_WARNING,
1176 "the right operand of \"%s\" changes sign when promoted",
1177 cpp_token_as_text (pfile, op->token));
1180 /* Clears the unused high order bits of the number pointed to by PNUM. */
1181 static cpp_num
1182 num_trim (cpp_num num, size_t precision)
1184 if (precision > PART_PRECISION)
1186 precision -= PART_PRECISION;
1187 if (precision < PART_PRECISION)
1188 num.high &= ((cpp_num_part) 1 << precision) - 1;
1190 else
1192 if (precision < PART_PRECISION)
1193 num.low &= ((cpp_num_part) 1 << precision) - 1;
1194 num.high = 0;
1197 return num;
1200 /* True iff A (presumed signed) >= 0. */
1201 static bool
1202 num_positive (cpp_num num, size_t precision)
1204 if (precision > PART_PRECISION)
1206 precision -= PART_PRECISION;
1207 return (num.high & (cpp_num_part) 1 << (precision - 1)) == 0;
1210 return (num.low & (cpp_num_part) 1 << (precision - 1)) == 0;
1213 /* Sign extend a number, with PRECISION significant bits and all
1214 others assumed clear, to fill out a cpp_num structure. */
1215 cpp_num
1216 cpp_num_sign_extend (cpp_num num, size_t precision)
1218 if (!num.unsignedp)
1220 if (precision > PART_PRECISION)
1222 precision -= PART_PRECISION;
1223 if (precision < PART_PRECISION
1224 && (num.high & (cpp_num_part) 1 << (precision - 1)))
1225 num.high |= ~(~(cpp_num_part) 0 >> (PART_PRECISION - precision));
1227 else if (num.low & (cpp_num_part) 1 << (precision - 1))
1229 if (precision < PART_PRECISION)
1230 num.low |= ~(~(cpp_num_part) 0 >> (PART_PRECISION - precision));
1231 num.high = ~(cpp_num_part) 0;
1235 return num;
1238 /* Returns the negative of NUM. */
1239 static cpp_num
1240 num_negate (cpp_num num, size_t precision)
1242 cpp_num copy;
1244 copy = num;
1245 num.high = ~num.high;
1246 num.low = ~num.low;
1247 if (++num.low == 0)
1248 num.high++;
1249 num = num_trim (num, precision);
1250 num.overflow = (!num.unsignedp && num_eq (num, copy) && !num_zerop (num));
1252 return num;
1255 /* Returns true if A >= B. */
1256 static bool
1257 num_greater_eq (cpp_num pa, cpp_num pb, size_t precision)
1259 bool unsignedp;
1261 unsignedp = pa.unsignedp || pb.unsignedp;
1263 if (!unsignedp)
1265 /* Both numbers have signed type. If they are of different
1266 sign, the answer is the sign of A. */
1267 unsignedp = num_positive (pa, precision);
1269 if (unsignedp != num_positive (pb, precision))
1270 return unsignedp;
1272 /* Otherwise we can do an unsigned comparison. */
1275 return (pa.high > pb.high) || (pa.high == pb.high && pa.low >= pb.low);
1278 /* Returns LHS OP RHS, where OP is a bit-wise operation. */
1279 static cpp_num
1280 num_bitwise_op (cpp_reader *pfile ATTRIBUTE_UNUSED,
1281 cpp_num lhs, cpp_num rhs, enum cpp_ttype op)
1283 lhs.overflow = false;
1284 lhs.unsignedp = lhs.unsignedp || rhs.unsignedp;
1286 /* As excess precision is zeroed, there is no need to num_trim () as
1287 these operations cannot introduce a set bit there. */
1288 if (op == CPP_AND)
1290 lhs.low &= rhs.low;
1291 lhs.high &= rhs.high;
1293 else if (op == CPP_OR)
1295 lhs.low |= rhs.low;
1296 lhs.high |= rhs.high;
1298 else
1300 lhs.low ^= rhs.low;
1301 lhs.high ^= rhs.high;
1304 return lhs;
1307 /* Returns LHS OP RHS, where OP is an inequality. */
1308 static cpp_num
1309 num_inequality_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs,
1310 enum cpp_ttype op)
1312 bool gte = num_greater_eq (lhs, rhs, CPP_OPTION (pfile, precision));
1314 if (op == CPP_GREATER_EQ)
1315 lhs.low = gte;
1316 else if (op == CPP_LESS)
1317 lhs.low = !gte;
1318 else if (op == CPP_GREATER)
1319 lhs.low = gte && !num_eq (lhs, rhs);
1320 else /* CPP_LESS_EQ. */
1321 lhs.low = !gte || num_eq (lhs, rhs);
1323 lhs.high = 0;
1324 lhs.overflow = false;
1325 lhs.unsignedp = false;
1326 return lhs;
1329 /* Returns LHS OP RHS, where OP is == or !=. */
1330 static cpp_num
1331 num_equality_op (cpp_reader *pfile ATTRIBUTE_UNUSED,
1332 cpp_num lhs, cpp_num rhs, enum cpp_ttype op)
1334 /* Work around a 3.0.4 bug; see PR 6950. */
1335 bool eq = num_eq (lhs, rhs);
1336 if (op == CPP_NOT_EQ)
1337 eq = !eq;
1338 lhs.low = eq;
1339 lhs.high = 0;
1340 lhs.overflow = false;
1341 lhs.unsignedp = false;
1342 return lhs;
1345 /* Shift NUM, of width PRECISION, right by N bits. */
1346 static cpp_num
1347 num_rshift (cpp_num num, size_t precision, size_t n)
1349 cpp_num_part sign_mask;
1350 bool x = num_positive (num, precision);
1352 if (num.unsignedp || x)
1353 sign_mask = 0;
1354 else
1355 sign_mask = ~(cpp_num_part) 0;
1357 if (n >= precision)
1358 num.high = num.low = sign_mask;
1359 else
1361 /* Sign-extend. */
1362 if (precision < PART_PRECISION)
1363 num.high = sign_mask, num.low |= sign_mask << precision;
1364 else if (precision < 2 * PART_PRECISION)
1365 num.high |= sign_mask << (precision - PART_PRECISION);
1367 if (n >= PART_PRECISION)
1369 n -= PART_PRECISION;
1370 num.low = num.high;
1371 num.high = sign_mask;
1374 if (n)
1376 num.low = (num.low >> n) | (num.high << (PART_PRECISION - n));
1377 num.high = (num.high >> n) | (sign_mask << (PART_PRECISION - n));
1381 num = num_trim (num, precision);
1382 num.overflow = false;
1383 return num;
1386 /* Shift NUM, of width PRECISION, left by N bits. */
1387 static cpp_num
1388 num_lshift (cpp_num num, size_t precision, size_t n)
1390 if (n >= precision)
1392 num.overflow = !num.unsignedp && !num_zerop (num);
1393 num.high = num.low = 0;
1395 else
1397 cpp_num orig, maybe_orig;
1398 size_t m = n;
1400 orig = num;
1401 if (m >= PART_PRECISION)
1403 m -= PART_PRECISION;
1404 num.high = num.low;
1405 num.low = 0;
1407 if (m)
1409 num.high = (num.high << m) | (num.low >> (PART_PRECISION - m));
1410 num.low <<= m;
1412 num = num_trim (num, precision);
1414 if (num.unsignedp)
1415 num.overflow = false;
1416 else
1418 maybe_orig = num_rshift (num, precision, n);
1419 num.overflow = !num_eq (orig, maybe_orig);
1423 return num;
1426 /* The four unary operators: +, -, ! and ~. */
1427 static cpp_num
1428 num_unary_op (cpp_reader *pfile, cpp_num num, enum cpp_ttype op)
1430 switch (op)
1432 case CPP_UPLUS:
1433 if (CPP_WTRADITIONAL (pfile) && !pfile->state.skip_eval)
1434 cpp_error (pfile, CPP_DL_WARNING,
1435 "traditional C rejects the unary plus operator");
1436 num.overflow = false;
1437 break;
1439 case CPP_UMINUS:
1440 num = num_negate (num, CPP_OPTION (pfile, precision));
1441 break;
1443 case CPP_COMPL:
1444 num.high = ~num.high;
1445 num.low = ~num.low;
1446 num = num_trim (num, CPP_OPTION (pfile, precision));
1447 num.overflow = false;
1448 break;
1450 default: /* case CPP_NOT: */
1451 num.low = num_zerop (num);
1452 num.high = 0;
1453 num.overflow = false;
1454 num.unsignedp = false;
1455 break;
1458 return num;
1461 /* The various binary operators. */
1462 static cpp_num
1463 num_binary_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs, enum cpp_ttype op)
1465 cpp_num result;
1466 size_t precision = CPP_OPTION (pfile, precision);
1467 size_t n;
1469 switch (op)
1471 /* Shifts. */
1472 case CPP_LSHIFT:
1473 case CPP_RSHIFT:
1474 if (!rhs.unsignedp && !num_positive (rhs, precision))
1476 /* A negative shift is a positive shift the other way. */
1477 if (op == CPP_LSHIFT)
1478 op = CPP_RSHIFT;
1479 else
1480 op = CPP_LSHIFT;
1481 rhs = num_negate (rhs, precision);
1483 if (rhs.high)
1484 n = ~0; /* Maximal. */
1485 else
1486 n = rhs.low;
1487 if (op == CPP_LSHIFT)
1488 lhs = num_lshift (lhs, precision, n);
1489 else
1490 lhs = num_rshift (lhs, precision, n);
1491 break;
1493 /* Arithmetic. */
1494 case CPP_MINUS:
1495 rhs = num_negate (rhs, precision);
1496 case CPP_PLUS:
1497 result.low = lhs.low + rhs.low;
1498 result.high = lhs.high + rhs.high;
1499 if (result.low < lhs.low)
1500 result.high++;
1501 result.unsignedp = lhs.unsignedp || rhs.unsignedp;
1502 result.overflow = false;
1504 result = num_trim (result, precision);
1505 if (!result.unsignedp)
1507 bool lhsp = num_positive (lhs, precision);
1508 result.overflow = (lhsp == num_positive (rhs, precision)
1509 && lhsp != num_positive (result, precision));
1511 return result;
1513 /* Comma. */
1514 default: /* case CPP_COMMA: */
1515 if (CPP_PEDANTIC (pfile) && (!CPP_OPTION (pfile, c99)
1516 || !pfile->state.skip_eval))
1517 cpp_error (pfile, CPP_DL_PEDWARN,
1518 "comma operator in operand of #if");
1519 lhs = rhs;
1520 break;
1523 return lhs;
1526 /* Multiplies two unsigned cpp_num_parts to give a cpp_num. This
1527 cannot overflow. */
1528 static cpp_num
1529 num_part_mul (cpp_num_part lhs, cpp_num_part rhs)
1531 cpp_num result;
1532 cpp_num_part middle[2], temp;
1534 result.low = LOW_PART (lhs) * LOW_PART (rhs);
1535 result.high = HIGH_PART (lhs) * HIGH_PART (rhs);
1537 middle[0] = LOW_PART (lhs) * HIGH_PART (rhs);
1538 middle[1] = HIGH_PART (lhs) * LOW_PART (rhs);
1540 temp = result.low;
1541 result.low += LOW_PART (middle[0]) << (PART_PRECISION / 2);
1542 if (result.low < temp)
1543 result.high++;
1545 temp = result.low;
1546 result.low += LOW_PART (middle[1]) << (PART_PRECISION / 2);
1547 if (result.low < temp)
1548 result.high++;
1550 result.high += HIGH_PART (middle[0]);
1551 result.high += HIGH_PART (middle[1]);
1552 result.unsignedp = true;
1553 result.overflow = false;
1555 return result;
1558 /* Multiply two preprocessing numbers. */
1559 static cpp_num
1560 num_mul (cpp_reader *pfile, cpp_num lhs, cpp_num rhs)
1562 cpp_num result, temp;
1563 bool unsignedp = lhs.unsignedp || rhs.unsignedp;
1564 bool overflow, negate = false;
1565 size_t precision = CPP_OPTION (pfile, precision);
1567 /* Prepare for unsigned multiplication. */
1568 if (!unsignedp)
1570 if (!num_positive (lhs, precision))
1571 negate = !negate, lhs = num_negate (lhs, precision);
1572 if (!num_positive (rhs, precision))
1573 negate = !negate, rhs = num_negate (rhs, precision);
1576 overflow = lhs.high && rhs.high;
1577 result = num_part_mul (lhs.low, rhs.low);
1579 temp = num_part_mul (lhs.high, rhs.low);
1580 result.high += temp.low;
1581 if (temp.high)
1582 overflow = true;
1584 temp = num_part_mul (lhs.low, rhs.high);
1585 result.high += temp.low;
1586 if (temp.high)
1587 overflow = true;
1589 temp.low = result.low, temp.high = result.high;
1590 result = num_trim (result, precision);
1591 if (!num_eq (result, temp))
1592 overflow = true;
1594 if (negate)
1595 result = num_negate (result, precision);
1597 if (unsignedp)
1598 result.overflow = false;
1599 else
1600 result.overflow = overflow || (num_positive (result, precision) ^ !negate
1601 && !num_zerop (result));
1602 result.unsignedp = unsignedp;
1604 return result;
1607 /* Divide two preprocessing numbers, returning the answer or the
1608 remainder depending upon OP. */
1609 static cpp_num
1610 num_div_op (cpp_reader *pfile, cpp_num lhs, cpp_num rhs, enum cpp_ttype op)
1612 cpp_num result, sub;
1613 cpp_num_part mask;
1614 bool unsignedp = lhs.unsignedp || rhs.unsignedp;
1615 bool negate = false, lhs_neg = false;
1616 size_t i, precision = CPP_OPTION (pfile, precision);
1618 /* Prepare for unsigned division. */
1619 if (!unsignedp)
1621 if (!num_positive (lhs, precision))
1622 negate = !negate, lhs_neg = true, lhs = num_negate (lhs, precision);
1623 if (!num_positive (rhs, precision))
1624 negate = !negate, rhs = num_negate (rhs, precision);
1627 /* Find the high bit. */
1628 if (rhs.high)
1630 i = precision - 1;
1631 mask = (cpp_num_part) 1 << (i - PART_PRECISION);
1632 for (; ; i--, mask >>= 1)
1633 if (rhs.high & mask)
1634 break;
1636 else if (rhs.low)
1638 if (precision > PART_PRECISION)
1639 i = precision - PART_PRECISION - 1;
1640 else
1641 i = precision - 1;
1642 mask = (cpp_num_part) 1 << i;
1643 for (; ; i--, mask >>= 1)
1644 if (rhs.low & mask)
1645 break;
1647 else
1649 if (!pfile->state.skip_eval)
1650 cpp_error (pfile, CPP_DL_ERROR, "division by zero in #if");
1651 return lhs;
1654 /* First nonzero bit of RHS is bit I. Do naive division by
1655 shifting the RHS fully left, and subtracting from LHS if LHS is
1656 at least as big, and then repeating but with one less shift.
1657 This is not very efficient, but is easy to understand. */
1659 rhs.unsignedp = true;
1660 lhs.unsignedp = true;
1661 i = precision - i - 1;
1662 sub = num_lshift (rhs, precision, i);
1664 result.high = result.low = 0;
1665 for (;;)
1667 if (num_greater_eq (lhs, sub, precision))
1669 lhs = num_binary_op (pfile, lhs, sub, CPP_MINUS);
1670 if (i >= PART_PRECISION)
1671 result.high |= (cpp_num_part) 1 << (i - PART_PRECISION);
1672 else
1673 result.low |= (cpp_num_part) 1 << i;
1675 if (i-- == 0)
1676 break;
1677 sub.low = (sub.low >> 1) | (sub.high << (PART_PRECISION - 1));
1678 sub.high >>= 1;
1681 /* We divide so that the remainder has the sign of the LHS. */
1682 if (op == CPP_DIV)
1684 result.unsignedp = unsignedp;
1685 result.overflow = false;
1686 if (!unsignedp)
1688 if (negate)
1689 result = num_negate (result, precision);
1690 result.overflow = (num_positive (result, precision) ^ !negate
1691 && !num_zerop (result));
1694 return result;
1697 /* CPP_MOD. */
1698 lhs.unsignedp = unsignedp;
1699 lhs.overflow = false;
1700 if (lhs_neg)
1701 lhs = num_negate (lhs, precision);
1703 return lhs;