rpm: Remove MEncoder from rpm packaging
[mplayer/glamo.git] / libao2 / ao_sgi.c
blob40bc6b917740da47986f21c0cf96b73009f48ce5
1 /*
2 * SGI/IRIX audio output driver
4 * copyright (c) 2001 oliver.schoenbrunner@jku.at
6 * This file is part of MPlayer.
8 * MPlayer is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * MPlayer is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License along
19 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
20 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
23 #include <stdio.h>
24 #include <stdlib.h>
25 #include <unistd.h>
26 #include <errno.h>
27 #include <dmedia/audio.h>
29 #include "audio_out.h"
30 #include "audio_out_internal.h"
31 #include "mp_msg.h"
32 #include "libaf/af_format.h"
34 static const ao_info_t info =
36 "sgi audio output",
37 "sgi",
38 "Oliver Schoenbrunner",
42 LIBAO_EXTERN(sgi)
45 static ALconfig ao_config;
46 static ALport ao_port;
47 static int sample_rate;
48 static int queue_size;
49 static int bytes_per_frame;
51 /**
52 * \param [in/out] format
53 * \param [out] width
55 * \return the closest matching SGI AL sample format
57 * \note width is set to required per-channel sample width
58 * format is updated to match the SGI AL sample format
60 static int fmt2sgial(int *format, int *width) {
61 int smpfmt = AL_SAMPFMT_TWOSCOMP;
63 /* SGI AL only supports float and signed integers in native
64 * endianness. If this is something else, we must rely on the audio
65 * filter to convert it to a compatible format. */
67 /* 24-bit audio is supported, but only with 32-bit alignment.
68 * mplayer's 24-bit format is packed, unfortunately.
69 * So we must upgrade 24-bit requests to 32 bits. Then we drop the
70 * lowest 8 bits during playback. */
72 switch(*format) {
73 case AF_FORMAT_U8:
74 case AF_FORMAT_S8:
75 *width = AL_SAMPLE_8;
76 *format = AF_FORMAT_S8;
77 break;
79 case AF_FORMAT_U16_LE:
80 case AF_FORMAT_U16_BE:
81 case AF_FORMAT_S16_LE:
82 case AF_FORMAT_S16_BE:
83 *width = AL_SAMPLE_16;
84 *format = AF_FORMAT_S16_NE;
85 break;
87 case AF_FORMAT_U24_LE:
88 case AF_FORMAT_U24_BE:
89 case AF_FORMAT_S24_LE:
90 case AF_FORMAT_S24_BE:
91 case AF_FORMAT_U32_LE:
92 case AF_FORMAT_U32_BE:
93 case AF_FORMAT_S32_LE:
94 case AF_FORMAT_S32_BE:
95 *width = AL_SAMPLE_24;
96 *format = AF_FORMAT_S32_NE;
97 break;
99 case AF_FORMAT_FLOAT_LE:
100 case AF_FORMAT_FLOAT_BE:
101 *width = 4;
102 *format = AF_FORMAT_FLOAT_NE;
103 smpfmt = AL_SAMPFMT_FLOAT;
104 break;
106 default:
107 *width = AL_SAMPLE_16;
108 *format = AF_FORMAT_S16_NE;
109 break;
113 return smpfmt;
116 // to set/get/query special features/parameters
117 static int control(int cmd, void *arg){
119 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] control.\n");
121 switch(cmd) {
122 case AOCONTROL_QUERY_FORMAT:
123 /* Do not reject any format: return the closest matching
124 * format if the request is not supported natively. */
125 return CONTROL_TRUE;
128 return CONTROL_UNKNOWN;
131 // open & setup audio device
132 // return: 1=success 0=fail
133 static int init(int rate, int channels, int format, int flags) {
135 int smpwidth, smpfmt;
136 int rv = AL_DEFAULT_OUTPUT;
138 smpfmt = fmt2sgial(&format, &smpwidth);
140 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] init: Samplerate: %iHz Channels: %s Format %s\n", rate, (channels > 1) ? "Stereo" : "Mono", af_fmt2str_short(format));
142 { /* from /usr/share/src/dmedia/audio/setrate.c */
144 double frate, realrate;
145 ALpv x[2];
147 if(ao_subdevice) {
148 rv = alGetResourceByName(AL_SYSTEM, ao_subdevice, AL_OUTPUT_DEVICE_TYPE);
149 if (!rv) {
150 mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] play: invalid device.\n");
151 return 0;
155 frate = rate;
157 x[0].param = AL_RATE;
158 x[0].value.ll = alDoubleToFixed(rate);
159 x[1].param = AL_MASTER_CLOCK;
160 x[1].value.i = AL_CRYSTAL_MCLK_TYPE;
162 if (alSetParams(rv,x, 2)<0) {
163 mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: setparams failed: %s\nCould not set desired samplerate.\n", alGetErrorString(oserror()));
166 if (x[0].sizeOut < 0) {
167 mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: AL_RATE was not accepted on the given resource.\n");
170 if (alGetParams(rv,x, 1)<0) {
171 mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: getparams failed: %s\n", alGetErrorString(oserror()));
174 realrate = alFixedToDouble(x[0].value.ll);
175 if (frate != realrate) {
176 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] init: samplerate is now %f (desired rate is %f)\n", realrate, frate);
178 sample_rate = (int)realrate;
181 bytes_per_frame = channels * smpwidth;
183 ao_data.samplerate = sample_rate;
184 ao_data.channels = channels;
185 ao_data.format = format;
186 ao_data.bps = sample_rate * bytes_per_frame;
187 ao_data.buffersize=131072;
188 ao_data.outburst = ao_data.buffersize/16;
190 ao_config = alNewConfig();
192 if (!ao_config) {
193 mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: %s\n", alGetErrorString(oserror()));
194 return 0;
197 if(alSetChannels(ao_config, channels) < 0 ||
198 alSetWidth(ao_config, smpwidth) < 0 ||
199 alSetSampFmt(ao_config, smpfmt) < 0 ||
200 alSetQueueSize(ao_config, sample_rate) < 0 ||
201 alSetDevice(ao_config, rv) < 0) {
202 mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: %s\n", alGetErrorString(oserror()));
203 return 0;
206 ao_port = alOpenPort("mplayer", "w", ao_config);
208 if (!ao_port) {
209 mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: Unable to open audio channel: %s\n", alGetErrorString(oserror()));
210 return 0;
213 // printf("ao_sgi, init: port %d config %d\n", ao_port, ao_config);
214 queue_size = alGetQueueSize(ao_config);
215 return 1;
219 // close audio device
220 static void uninit(int immed) {
222 /* TODO: samplerate should be set back to the value before mplayer was started! */
224 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] uninit: ...\n");
226 if (ao_config) {
227 alFreeConfig(ao_config);
228 ao_config = NULL;
231 if (ao_port) {
232 if (!immed)
233 while(alGetFilled(ao_port) > 0) sginap(1);
234 alClosePort(ao_port);
235 ao_port = NULL;
240 // stop playing and empty buffers (for seeking/pause)
241 static void reset(void) {
243 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] reset: ...\n");
245 alDiscardFrames(ao_port, queue_size);
248 // stop playing, keep buffers (for pause)
249 static void audio_pause(void) {
251 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] audio_pause: ...\n");
255 // resume playing, after audio_pause()
256 static void audio_resume(void) {
258 mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] audio_resume: ...\n");
262 // return: how many bytes can be played without blocking
263 static int get_space(void) {
265 // printf("ao_sgi, get_space: (ao_outburst %d)\n", ao_data.outburst);
266 // printf("ao_sgi, get_space: alGetFillable [%d] \n", alGetFillable(ao_port));
268 return alGetFillable(ao_port) * bytes_per_frame;
273 // plays 'len' bytes of 'data'
274 // it should round it down to outburst*n
275 // return: number of bytes played
276 static int play(void* data, int len, int flags) {
278 /* Always process data in quadword-aligned chunks (64-bits). */
279 const int plen = len / (sizeof(uint64_t) * bytes_per_frame);
280 const int framecount = plen * sizeof(uint64_t);
282 // printf("ao_sgi, play: len %d flags %d (%d %d)\n", len, flags, ao_port, ao_config);
283 // printf("channels %d\n", ao_data.channels);
285 if(ao_data.format == AF_FORMAT_S32_NE) {
286 /* The zen of this is explained in fmt2sgial() */
287 int32_t *smpls = data;
288 const int32_t *smple = smpls + (framecount * ao_data.channels);
289 while(smpls < smple)
290 *smpls++ >>= 8;
293 alWriteFrames(ao_port, data, framecount);
295 return framecount * bytes_per_frame;
299 // return: delay in seconds between first and last sample in buffer
300 static float get_delay(void){
302 // printf("ao_sgi, get_delay: (ao_buffersize %d)\n", ao_buffersize);
304 // return (float)queue_size/((float)sample_rate);
305 const int outstanding = alGetFilled(ao_port);
306 return (float)((outstanding < 0) ? queue_size : outstanding) /
307 ((float)sample_rate);