build.sh

   1 #!/bin/sh
   2 # ===========================================================================
   3 #
   4 # NAME
   5 #   build.sh - extract, configure, build and install the X Window System
   6 #
   7 # SYNOPSIS
   8 #   build.sh [options] [prefix]
   9 #   build.sh [-L]
  10 #
  11 # DESCRIPTION
  12 #   The script ultimate goal is to build all of the X Window and some of its
  13 #   dependencies from source.
  14 #
  15 #   X.Org Modular Tree Developer's Guide
  16 #
  17 #   Please consult the guide at http://www.x.org/wiki/ModularDevelopersGuide
  18 #   It provides detailed instructions on the build tools to install, where to
  19 #   find the script and how to invoke it.
  20 #
  21 #   The X Window System Source Code
  22 #
  23 #   The source code is hosted by freedesktop.org and is composed of over 200
  24 #   modules under the git source code management system. X.Org releases are
  25 #   available at http://www.x.org/releases/ in the form of software packages.
  26 #
  27 #   Basic Operation
  28 #
  29 #   The script goes through its list of modules to build. If the source code is
  30 #   not on disk, it attempts to obtain it from git if the --clone option is
  31 #   specified. If not, it looks for a package archive file on disk. If it is
  32 #   still not found, the module is skipped.
  33 #
  34 #   The script then runs the appropriate configure script, either autogen.sh
  35 #   for git modules or the autoconf generated configure script for package
  36 #   archives.
  37 #
  38 # FEATURES
  39 #   Over time, functionality have been added to help building a large
  40 #   number modules. Progress report, handling build breaks, supporting the
  41 #   GNU Build System features, final build report, and so on.
  42 #
  43 #   Building from a Custom Modules List
  44 #
  45 #   Starting from the list generated using the -L option, remove unwanted
  46 #   modules. You may also add your own module or add specific configure
  47 #   options for some modules to meet your configuration needs. Using the
  48 #   --modfile option, your list replaces the built-in list of the script.
  49 #
  50 #   Resuming Build After a Break
  51 #
  52 #   The script can resume building at the last point of failure. This saves a
  53 #   lot of build time as the modules already built are skipped. The --autoresume
  54 #   option can be used with --modfile such that only the modules you care about
  55 #   are built and revisited until successful completion.
  56 #
  57 #   Specifying Custom Build Commands
  58 #
  59 #   By default, the script invokes the make program with the target "all" and
  60 #   "install". Some options like -c, -D, or -d alter the targets the make
  61 #   program builds, but you can specify your own command instead. Using the
  62 #   --cmd option, provide a different make or git command.
  63 #
  64 #   Specifying Configuration Options to Specific Modules
  65 #
  66 #   In the modulesfile used by the --modfile option, add any configuration
  67 #   options you want to pass to the modules as it gets configures by autoconf.
  68 #   Write the configure options next to the module name in the file.
  69 #   It could be something like --enable-strict-compilation for example.
  70 #
  71 # OPTIONS
  72 #   -a          Do NOT run auto config tools (autogen.sh, configure)
  73 #   -b          Use .build.unknown build directory
  74 #   -c          Run make clean in addition to "all install"
  75 #   -D          Run make dist in addition to "all install"
  76 #   -d          Run make distcheck in addition "all install"
  77 #   -g          Compile and link with debug information
  78 #   -L          Just list modules to build
  79 #   -h, --help  Display this help and exit successfully
  80 #   -n          Do not quit after error; just print error message
  81 #   -o module/component
  82 #               Build just this module/component
  83 #   -p          Update source code before building (git pull --rebase)
  84 #   -s sudo   The command name providing superuser privilege
  85 #   --autoresume resumefile
  86 #               Append module being built to, and autoresume from, resumefile
  87 #   --check     Run make check in addition "all install"
  88 #   --clone     Clone non-existing repositories (uses \$GITROOT if set)
  89 #   --cmd command
  90 #               Execute arbitrary git, gmake, or make command
  91 #   --confflags options
  92 #               Pass options to autgen.sh/configure of all modules
  93 #   --modfile modulesfile
  94 #               Only process the module/components specified in modulesfile
  95 #               Any text after, and on the same line as, the module/component
  96 #               is assumed to be configuration options for the configuration
  97 #               of each module/component specifically
  98 #   --retry-v1  Remake 'all' on failure with Automake silent rules disabled
  99 #
 100 # PREFIX
 101 #   An absolute filename where GNU "make" will install binaries, libraries and
 102 #   other installable files. The value is passed to Autoconf through the
 103 #   --prefix option.
 104 #
 105 # FILES
 106 #   resumefile
 107 #   When using --autoresume, the script reads and skips modules tagged with
 108 #   "PASS" and resume building at the module tagged with "FAIL". The resumefile
 109 #   file is not intended to be user edited.
 110 #
 111 #   modulesfile
 112 #   When using --modfile, the script replaces its internal modules list with
 113 #   the list contained in the file. This allows you to build only the modules
 114 #   you care about and to add third party modules or modules you create.
 115 #   It is helpful to initialized the file using the -L option.#
 116 #
 117 # ENVIRONMENT
 118 #   Environment variables specific to build.sh:
 119 #
 120 #   PREFIX      Install architecture-independent files in PREFIX [/usr/local]
 121 #               Each module/components is invoked with --prefix
 122 #   EPREFIX     Install architecture-dependent files in EPREFIX [PREFIX]
 123 #               Each module/components is invoked with --exec-prefix
 124 #   BINDIR      Install user executables [EPREFIX/bin]
 125 #               Each module/components is invoked with --bindir
 126 #   DATAROOTDIR Install read-only arch-independent data root [PREFIX/share]
 127 #               Each module/components is invoked with --datarootdir
 128 #   DATADIR     Install read-only architecture-independent data [DATAROOTDIR]
 129 #               Each module/components is invoked with --datadir
 130 #   LIBDIR      Install object code libraries [EPREFIX/lib]
 131 #               Each module/components is invoked with --libdir
 132 #   LOCALSTATEDIR
 133 #               Modifiable single-machine data [PREFIX/var]
 134 #               Each module/components is invoked with --localstatedir
 135 #   QUIET       Do not print messages saying which checks are being made
 136 #               Each module/components is invoked with --quite
 137 #   GITROOT     Source code repository path [git://anongit.freedesktop.org/git]
 138 #               Optional when using --clone to update source code before building
 139 #   CONFFLAGS   Configure options to pass to all Autoconf configure scripts
 140 #               Refer to 'configure --help' from any module/components
 141 #
 142 #  Environment variables defined by the GNU Build System:
 143 #
 144 #  ACLOCAL     The aclocal cmd name [aclocal -I ${DESTDIR}/${DATADIR}/aclocal]
 145 #  DESTDIR     Path to the staging area where installed objects are relocated
 146 #  MAKE        The name of the make command [make]
 147 #  MAKEFLAGS   Options to pass to all $(MAKE) invocations
 148 #  CC          C compiler command
 149 #  CFLAGS      C compiler flags
 150 #  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
 151 #              nonstandard directory <lib dir>
 152 #  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
 153 #              you have headers in a nonstandard directory <include dir>
 154 #  CPP         C preprocessor
 155 #
 156 #  Environment variables defined by the shell:
 157 #  PATH        List of directories that the shell searches for commands
 158 #              $DESTDIR/$BINDIR is prepended
 159 #
 160 #  Environment variables defined by the dynamic linker:
 161 #  LD_LIBRARY_PATH
 162 #              List directories that the linker searches for shared objects
 163 #              $DESTDIR/$LIBDIR is prepended
 164 #
 165 #  Environment variables defined by the pkg-config system:
 166 #
 167 #  PKG_CONFIG_PATH
 168 #              List directories that pkg-config searches for libraries
 169 #              $DESTDIR/$DATADIR/pkgconfig and
 170 #              $DESTDIR/$LIBDIR/pkgconfig are prepended
 171 #
 172 # PORTABILITY
 173 #  This script is intended to run on any platform supported by X.Org.
 174 #  The script must be able to run in a Bourne shell.
 175 #
 176 # ===========================================================================
 177
 178 envoptions() {
 179 cat << EOF
 180 Environment variables specific to build.sh:
 181   PREFIX      Install architecture-independent files in PREFIX [/usr/local]
 182               Each module/components is invoked with --prefix
 183   EPREFIX     Install architecture-dependent files in EPREFIX [PREFIX]
 184               Each module/components is invoked with --exec-prefix
 185   BINDIR      Install user executables [EPREFIX/bin]
 186               Each module/components is invoked with --bindir
 187   DATAROOTDIR Install read-only arch-independent data root [PREFIX/share]
 188               Each module/components is invoked with --datarootdir
 189   DATADIR     Install read-only architecture-independent data [DATAROOTDIR]
 190               Each module/components is invoked with --datadir
 191   LIBDIR      Install object code libraries [EPREFIX/lib]
 192               Each module/components is invoked with --libdir
 193   LOCALSTATEDIR
 194               Modifiable single-machine data [PREFIX/var]
 195               Each module/components is invoked with --localstatedir
 196   QUIET       Do not print messages saying which checks are being made
 197               Each module/components is invoked with --quite
 198   GITROOT     Source code repository path [git://anongit.freedesktop.org/git]
 199               Optional when using --clone to update source code before building
 200   CONFFLAGS   Configure options to pass to all Autoconf configure scripts
 201               Refer to 'configure --help' from any module/components
 202
 203 Environment variables defined by the GNU Build System:
 204   ACLOCAL     The aclocal cmd name [aclocal -I \${DESTDIR}/\${DATADIR}/aclocal]
 205   DESTDIR     Path to the staging area where installed objects are relocated
 206   MAKE        The name of the make command [make]
 207   MAKEFLAGS   Options to pass to all \$(MAKE) invocations
 208   CC          C compiler command
 209   CFLAGS      C compiler flags
 210   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
 211               nonstandard directory <lib dir>
 212   CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
 213               you have headers in a nonstandard directory <include dir>
 214   CPP         C preprocessor
 215
 216 Environment variables defined by the shell:
 217   PATH        List of directories that the shell searches for commands
 218               \$DESTDIR/\$BINDIR is prepended
 219
 220 Environment variables defined by the dynamic linker:
 221   LD_LIBRARY_PATH
 222               List directories that the linker searches for shared objects
 223               \$DESTDIR/\$LIBDIR is prepended
 224
 225 Environment variables defined by the pkg-config system:
 226   PKG_CONFIG_PATH
 227               List directories that pkg-config searches for libraries
 228               \$DESTDIR/\$DATADIR/pkgconfig and
 229               \$DESTDIR/\$LIBDIR/pkgconfig are prepended
 230 EOF
 231 }
 232
 233 setup_buildenv() {
 234
 235     # Remember if the user had supplied a value through env var or cmd line
 236     # A value from cmd line takes precedence of the shell environment
 237     PREFIX_USER=${PREFIX:+yes}
 238     EPREFIX_USER=${EPREFIX:+yes}
 239     BINDIR_USER=${BINDIR:+yes}
 240     DATAROOTDIR_USER=${DATAROOTDIR:+yes}
 241     DATADIR_USER=${DATADIR:+yes}
 242     LIBDIR_USER=${LIBDIR:+yes}
 243     LOCALSTATEDIR_USER=${LOCALSTATEDIR:+yes}
 244
 245     # Assign a default value if no value was supplied by the user
 246     PREFIX=${PREFIX:-/usr/local}
 247     EPREFIX=${EPREFIX:-$PREFIX}
 248     BINDIR=${BINDIR:-$EPREFIX/bin}
 249     DATAROOTDIR=${DATAROOTDIR:-$PREFIX/share}
 250     DATADIR=${DATADIR:-$DATAROOTDIR}
 251     LIBDIR=${LIBDIR:-$EPREFIX/lib}
 252     LOCALSTATEDIR=${LOCALSTATEDIR:-$PREFIX/var}
 253
 254     # Support previous usage of LIBDIR which was a subdir relative to PREFIX
 255     # We use EPREFIX as this is what PREFIX really meant at the time
 256     if [ X"$LIBDIR" != X ]; then
 257         if [ X"`expr $LIBDIR : "\(.\)"`" != X/ ]; then
 258             echo ""
 259             echo "Warning: this usage of \$LIBDIR is deprecated. Use a full path name."
 260             echo "The supplied value \"$LIBDIR\" has been replaced with $EPREFIX/$LIBDIR."
 261             echo ""
 262                 LIBDIR=$EPREFIX/$LIBDIR
 263         fi
 264     fi
 265
 266     # All directories variables must be full path names
 267     check_full_path $PREFIX PREFIX
 268     check_full_path $EPREFIX EPREFIX
 269     check_full_path $BINDIR BINDIR
 270     check_full_path $DATAROOTDIR DATAROOTDIR
 271     check_full_path $DATADIR DATADIR
 272     check_full_path $LIBDIR LIBDIR
 273     check_full_path $LOCALSTATEDIR LOCALSTATEDIR
 274
 275     # This will catch the case where user forgets to set PREFIX
 276     # and does not have write permission in the /usr/local default location
 277     check_writable_dir ${DESTDIR}${PREFIX} PREFIX
 278
 279     # Must create local aclocal dir or aclocal fails
 280     ACLOCAL_LOCALDIR="${DESTDIR}${DATADIR}/aclocal"
 281     $SUDO mkdir -p ${ACLOCAL_LOCALDIR}
 282
 283     # The following is required to make aclocal find our .m4 macros
 284     ACLOCAL=${ACLOCAL:="aclocal"}
 285     ACLOCAL="${ACLOCAL} -I ${ACLOCAL_LOCALDIR}"
 286     export ACLOCAL
 287
 288     # The following is required to make pkg-config find our .pc metadata files
 289     PKG_CONFIG_PATH=${DESTDIR}${DATADIR}/pkgconfig:${DESTDIR}${LIBDIR}/pkgconfig${PKG_CONFIG_PATH+:$PKG_CONFIG_PATH}
 290     export PKG_CONFIG_PATH
 291
 292     # Set the library path so that locally built libs will be found by apps
 293     LD_LIBRARY_PATH=${DESTDIR}${LIBDIR}${LD_LIBRARY_PATH+:$LD_LIBRARY_PATH}
 294     export LD_LIBRARY_PATH
 295
 296     # Set the path so that locally built apps will be found and used
 297     PATH=${DESTDIR}${BINDIR}${PATH+:$PATH}
 298     export PATH
 299
 300     # Choose which make program to use
 301     MAKE=${MAKE:="make"}
 302
 303     # Create the log file directory
 304     $SUDO mkdir -p ${DESTDIR}${LOCALSTATEDIR}/log
 305 }
 306
 307 # explain where a failure occurred
 308 # if you find this message in the build output it can help tell you where the failure occurred
 309 # arguments:
 310 #   $1 - which command failed
 311 #   $2 - module
 312 #   $3 - component
 313 # returns:
 314 #   (irrelevant)
 315 failed() {
 316     cmd=$1
 317     module=$2
 318     component=$3
 319     echo "build.sh: \"$cmd\" failed on $module${component:+/}$component"
 320     failed_components="$failed_components $module${component:+/}$component"
 321 }
 322
 323 # print a pretty title to separate the processing of each module
 324 # arguments:
 325 #   $1 - module
 326 #   $2 - component
 327 #   $3 - configuration options
 328 # returns:
 329 #   (irrelevant)
 330 module_title() {
 331     module=$1
 332     component=$2
 333     confopts="$3"
 334     # preconds
 335     if [ X"$module" = X ]; then
 336         return
 337     fi
 338
 339     echo ""
 340     echo "======================================================================"
 341     echo "==  Processing:  \"$module${component:+/}$component\""
 342     echo "==        configuration options:  $CONFFLAGS $confopts"
 343 }
 344
 345 # Search for tarballs in either cwd or under a module directory
 346 # The tarball is always extracted in either one of these locations:
 347 #   - modules with components: under the module subdir (e.g lib/libX11-1.4.0)
 348 #   - modules without components: under cwd (e.g xserver-1.14.0)
 349 # The tarballs are expected to be under one of the locations described above
 350 # The location of the tarball does not dictate where it is extracted
 351 # arguments:
 352 #   $1 - module
 353 #   $2 - component
 354 # returns:
 355 #   0 - good (either no tarballs or successful extract)
 356 #   1 - bad
 357 checkfortars() {
 358     module=$1
 359     component=$2
 360
 361     # The package stem is the part of the tar file name that identifies
 362     # the git module archived source. Ex: xclock, pixman, libX11
 363     # For modules without components, the module name is used by default.
 364     pkg_stem=${component:-$module}
 365
 366     # Handle special cases where the module or component directory
 367     # does not match the package name and/or the package root dir
 368     case $module in
 369         "data")
 370             case $component in
 371                 "cursors") pkg_stem="xcursor-themes" ;;
 372                 "bitmaps") pkg_stem="xbitmaps" ;;
 373             esac
 374             ;;
 375         "font")
 376             if [ X"$component" != X"encodings" ]; then
 377                 pkg_stem="font-$component"
 378             fi
 379             ;;
 380         "lib")
 381             case $component in
 382                 "libXRes") pkg_stem="libXres" ;;
 383                 "libxtrans") pkg_stem="xtrans" ;;
 384             esac
 385             ;;
 386         "proto")
 387             case $component in
 388                 "x11proto") pkg_stem="xproto" ;;
 389             esac
 390             ;;
 391         "util")
 392             case $component in
 393                 "cf") pkg_stem="xorg-cf-files" ;;
 394                 "macros") pkg_stem="util-macros" ;;
 395             esac
 396             ;;
 397         "xcb")
 398             case $component in
 399                 "proto")
 400                     pkg_stem="xcb-proto"
 401                     ;;
 402                 "pthread-stubs")
 403                     pkg_stem="libpthread-stubs"
 404                     ;;
 405                 "libxcb")
 406                     pkg_stem="libxcb"
 407                     ;;
 408                 util*)
 409                     pkg_stem="xcb-$component"
 410                     ;;
 411             esac
 412             ;;
 413         "mesa")
 414             case $component in
 415                 "drm")
 416                     pkg_stem="libdrm"
 417                     ;;
 418                 "mesa")
 419                     pkg_stem="MesaLib"
 420                     ;;
 421             esac
 422             ;;
 423         "xserver")
 424             pkg_stem="xorg-server"
 425             ;;
 426     esac
 427
 428     # Search for tarballs in both the module and the src top directory
 429     for ii in $module .; do
 430         for jj in bz2 gz xz; do
 431
 432             # Select from the list the last tarball with a specific pkg_stem
 433             pkg_tarfile=`ls -1rt $ii/$pkg_stem-[0-9]*.tar.$jj 2> /dev/null | tail -n 1`
 434
 435             # Extract the tarball under the module directory
 436             # For modules without components, extract in top level dir
 437             if [ X"$pkg_tarfile" != X ]; then
 438
 439                 # Get the package version and archived toplevel directory
 440                 pkg_version=`echo $pkg_tarfile | sed 's,.*'$pkg_stem'-\(.*\)\.tar\.'$jj',\1,'`
 441                 pkg_root_dir="$pkg_stem-$pkg_version"
 442                 pkg_root_dir=`echo $pkg_root_dir | sed 's,MesaLib,Mesa,'`
 443
 444                 # Find where to extract the tar file
 445                 old_srcdir=$SRCDIR
 446                 if [ X"$component" = X ]; then
 447                     # For modules with no components (i.e xserver)
 448                     pkg_extract_dir="."
 449                     SRCDIR=$pkg_root_dir
 450                 else
 451                     # For modules with components (i.e xcb/proto or lib/libXi)
 452                     pkg_extract_dir=$module
 453                     SRCDIR=$module/$pkg_root_dir
 454                 fi
 455
 456                 if [ ! -d $SRCDIR ]; then
 457                     mkdir -p $module
 458                     case $jj in
 459                         "bz2")
 460                             pkg_tar_opts=xjf
 461                             ;;
 462                         "gz")
 463                             pkg_tar_opts=xzf
 464                             ;;
 465                         "xz")
 466                             pkg_tar_opts=xJf
 467                             ;;
 468                     esac
 469                     tar $pkg_tar_opts $pkg_tarfile -C $pkg_extract_dir
 470                     if [ $? -ne 0 ]; then
 471                         SRCDIR=${old_srcdir}
 472                         echo "Unable to extract $pkg_tarfile for $module module"
 473                         failed tar $module $component
 474                         return 1
 475                     fi
 476                 fi
 477                 return 0
 478             fi
 479         done
 480     done
 481
 482     return 0
 483 }
 484
 485 # perform a clone of a git repository
 486 # this function provides the mapping between module/component names
 487 # and their location in the fd.o repository
 488 # arguments:
 489 #   $1 - module
 490 #   $2 - component (optional)
 491 # returns:
 492 #   0 - good
 493 #   1 - bad
 494 clone() {
 495     module=$1
 496     component=$2
 497     # preconds
 498     if [ X"$module" = X ]; then
 499         echo "clone() required first argument is missing"
 500         return 1
 501     fi
 502
 503     case $module in
 504     "pixman")
 505         BASEDIR=""
 506         ;;
 507     "xcb")
 508         BASEDIR=""
 509         ;;
 510     "mesa")
 511         BASEDIR=""
 512         ;;
 513     "xkeyboard-config")
 514         BASEDIR=""
 515         ;;
 516     "libevdev")
 517         BASEDIR=""
 518         ;;
 519     "libinput")
 520         BASEDIR="wayland/"
 521         ;;
 522     *)
 523         BASEDIR="xorg/"
 524         ;;
 525     esac
 526
 527     DIR="$module${component:+/}$component"
 528     GITROOT=${GITROOT:="git://anongit.freedesktop.org/git"}
 529
 530     if [ ! -d "$DIR" ]; then
 531         git clone "$GITROOT/$BASEDIR$DIR" "$DIR"
 532         if [ $? -ne 0 ]; then
 533             echo "Failed to clone $module${component:+/}$component. Ignoring."
 534             clonefailed_components="$clonefailed_components $module${component:+/}$component"
 535             return 1
 536         fi
 537         old_pwd=`pwd`
 538         cd $DIR
 539         if [ $? -ne 0 ]; then
 540             echo "Failed to cd to $module${component:+/}$component. Ignoring."
 541             clonefailed_components="$clonefailed_components $module${component:+/}$component"
 542             return 1
 543         return 1
 544         fi
 545         git submodule init
 546         if [ $? -ne 0 ]; then
 547             echo "Failed to initialize $module${component:+/}$component submodule. Ignoring."
 548             clonefailed_components="$clonefailed_components $module${component:+/}$component"
 549             return 1
 550         fi
 551         git submodule update
 552         if [ $? -ne 0 ]; then
 553             echo "Failed to update $module${component:+/}$component submodule. Ignoring."
 554             clonefailed_components="$clonefailed_components $module${component:+/}$component"
 555             return 1
 556         fi
 557         cd ${old_pwd}
 558     else
 559         echo "git cannot clone into an existing directory $module${component:+/}$component"
 560         return 1
 561     fi
 562
 563     return 0
 564 }
 565
 566 # perform processing of each module/component
 567 # arguments:
 568 #   $1 - module
 569 #   $2 - component
 570 #   $3 - configure options
 571 # returns:
 572 #   0 - good
 573 #   1 - bad
 574 process() {
 575     needs_config=0
 576
 577     module=$1
 578     component=$2
 579     confopts="$3"
 580     # preconds
 581     if [ X"$module" = X ]; then
 582         echo "process() required first argument is missing"
 583         return 1
 584     fi
 585
 586     module_title $module "$component" "$confopts"
 587
 588     SRCDIR=""
 589     CONFCMD=""
 590     if [ -f $module${component:+/}$component/autogen.sh ]; then
 591         SRCDIR="$module${component:+/}$component"
 592         CONFCMD="autogen.sh"
 593     elif [ X"$CLONE" != X ]; then
 594         clone $module $component
 595         if [ $? -eq 0 ]; then
 596             SRCDIR="$module${component:+/}$component"
 597             CONFCMD="autogen.sh"
 598         fi
 599         needs_config=1
 600     else
 601         checkfortars $module $component
 602         if [ $? -eq 0 ]; then
 603             if [ X"$SRCDIR" = X ]; then
 604                 echo "$module${component:+/}$component does not exist, skipping."
 605                 nonexistent_components="$nonexistent_components $module${component:+/}$component"
 606                 return 0
 607             fi
 608             CONFCMD="configure"
 609         else
 610             return 1
 611         fi
 612     fi
 613
 614     old_pwd=`pwd`
 615     cd $SRCDIR
 616     if [ $? -ne 0 ]; then
 617         failed cd1 $module $component
 618         return 1
 619     fi
 620
 621     if [ X"$GITCMD" != X ]; then
 622         $GITCMD
 623         rtn=$?
 624         cd $old_pwd
 625
 626         if [ $rtn -ne 0 ]; then
 627             failed "$GITCMD" $module $component
 628             return 1
 629         fi
 630         return 0
 631     fi
 632
 633     if [ X"$PULL" != X ]; then
 634         git pull --rebase
 635         if [ $? -ne 0 ]; then
 636             failed "git pull" $module $component
 637             cd $old_pwd
 638             return 1
 639         fi
 640         # The parent module knows which commit the submodule should be at
 641         git submodule update
 642         if [ $? -ne 0 ]; then
 643             failed "git submodule update" $module $component
 644             return 1
 645         fi
 646     fi
 647
 648     # Build outside source directory
 649     if [ X"$DIR_ARCH" != X ] ; then
 650         mkdir -p "$DIR_ARCH"
 651         if [ $? -ne 0 ]; then
 652             failed mkdir $module $component
 653             cd $old_pwd
 654             return 1
 655         fi
 656         cd "$DIR_ARCH"
 657         if [ $? -ne 0 ]; then
 658             failed cd2 $module $component
 659             cd ${old_pwd}
 660             return 1
 661         fi
 662     fi
 663
 664     # Use "sh autogen.sh" since some scripts are not executable in CVS
 665     if [ $needs_config -eq 1 ] || [ X"$NOAUTOGEN" = X ]; then
 666         sh ${DIR_CONFIG}/${CONFCMD} \
 667             ${PREFIX_USER:+--prefix="$PREFIX"} \
 668             ${EPREFIX_USER:+--exec-prefix="$EPREFIX"} \
 669             ${BINDIR_USER:+--bindir="$BINDIR"} \
 670             ${DATAROOTDIR_USER:+--datarootdir="$DATAROOTDIR"} \
 671             ${DATADIR_USER:+--datadir="$DATADIR"} \
 672             ${LIBDIR_USER:+--libdir="$LIBDIR"} \
 673             ${LOCALSTATEDIR_USER:+--localstatedir="$LOCALSTATEDIR"} \
 674             ${QUIET:+--quiet} \
 675             ${CONFFLAGS} $confopts \
 676             ${CC:+CC="$CC"} \
 677             ${CPP:+CPP="$CPP"} \
 678             ${CPPFLAGS:+CPPFLAGS="$CPPFLAGS"} \
 679             ${CFLAGS:+CFLAGS="$CFLAGS"} \
 680             ${LDFLAGS:+LDFLAGS="$LDFLAGS"}
 681         if [ $? -ne 0 ]; then
 682             failed ${CONFCMD} $module $component
 683             cd $old_pwd
 684             return 1
 685         fi
 686     fi
 687
 688     # A custom 'make' target list was supplied through --cmd option
 689     if [ X"$MAKECMD" != X ]; then
 690         ${MAKE} $MAKEFLAGS $MAKECMD
 691         rtn=$?
 692         cd $old_pwd
 693
 694         if [ $rtn -ne 0 ]; then
 695             failed "$MAKE $MAKEFLAGS $MAKECMD" $module $component
 696             return 1
 697         fi
 698         return 0
 699     fi
 700
 701     ${MAKE} $MAKEFLAGS
 702     if [ $? -ne 0 ]; then
 703         # Rerun with Automake silent rules disabled to see failing gcc statement
 704         if [ X"$RETRY_VERBOSE" != X ]; then
 705             echo ""
 706             echo "build.sh: Rebuilding $component with Automake silent rules disabled"
 707             ${MAKE} $MAKEFLAGS V=1
 708         fi
 709         failed "$MAKE $MAKEFLAGS" $module $component
 710         cd $old_pwd
 711         return 1
 712     fi
 713
 714     if [ X"$CHECK" != X ]; then
 715         ${MAKE} $MAKEFLAGS check
 716         if [ $? -ne 0 ]; then
 717             failed "$MAKE $MAKEFLAGS check" $module $component
 718             cd $old_pwd
 719             return 1
 720         fi
 721     fi
 722
 723     if [ X"$CLEAN" != X ]; then
 724         ${MAKE} $MAKEFLAGS clean
 725         if [ $? -ne 0 ]; then
 726             failed "$MAKE $MAKEFLAGS clean" $module $component
 727             cd $old_pwd
 728             return 1
 729         fi
 730     fi
 731
 732     if [ X"$DIST" != X ]; then
 733         ${MAKE} $MAKEFLAGS dist
 734         if [ $? -ne 0 ]; then
 735             failed "$MAKE $MAKEFLAGS dist" $module $component
 736             cd $old_pwd
 737             return 1
 738         fi
 739     fi
 740
 741     if [ X"$DISTCHECK" != X ]; then
 742         ${MAKE} $MAKEFLAGS distcheck
 743         if [ $? -ne 0 ]; then
 744             failed "$MAKE $MAKEFLAGS distcheck" $module $component
 745             cd $old_pwd
 746             return 1
 747         fi
 748     fi
 749
 750     $SUDO env LD_LIBRARY_PATH=$LD_LIBRARY_PATH ${MAKE} $MAKEFLAGS install
 751     if [ $? -ne 0 ]; then
 752         failed "$SUDO env LD_LIBRARY_PATH=$LD_LIBRARY_PATH $MAKE $MAKEFLAGS install" $module $component
 753         cd $old_pwd
 754         return 1
 755     fi
 756
 757     cd ${old_pwd}
 758
 759     return 0
 760 }
 761
 762 # process each module/component and handle:
 763 # LISTONLY, RESUME, NOQUIT, and BUILD_ONE
 764 # arguments:
 765 #   $1 - module
 766 #   $2 - component
 767 #   $3 - configure options
 768 # returns:
 769 #   0 - good
 770 #   1 - bad
 771 build() {
 772     module=$1
 773     component=$2
 774     confopts="$3"
 775     if [ X"$LISTONLY" != X ]; then
 776         echo "$module${component:+/}$component"
 777         return 0
 778     fi
 779
 780     if [ X"$RESUME" != X ]; then
 781         if [ X"$RESUME" = X"$module${component:+/}$component" ]; then
 782             unset RESUME
 783             # Resume build at this module
 784         else
 785             echo "Skipping $module${component:+/}$component..."
 786             return 0
 787         fi
 788     fi
 789
 790     process $module "$component" "$confopts"
 791     process_rtn=$?
 792     if [ X"$BUILT_MODULES_FILE" != X ]; then
 793         if [ $process_rtn -ne 0 ]; then
 794             echo "FAIL: $module${component:+/}$component" >> $BUILT_MODULES_FILE
 795         else
 796             echo "PASS: $module${component:+/}$component" >> $BUILT_MODULES_FILE
 797         fi
 798     fi
 799
 800     if [ $process_rtn -ne 0 ]; then
 801         echo "build.sh: error processing:  \"$module${component:+/}$component\""
 802         if [ X"$NOQUIT" = X ]; then
 803             exit 1
 804         fi
 805         return $process_rtn
 806     fi
 807
 808     if [ X"$BUILD_ONE" != X ]; then
 809         echo "Single-component build complete"
 810         exit 0
 811     fi
 812 }
 813
 814
 815 # just process the sub-projects supplied in the given file ($MODFILE)
 816 # in the order in which they are found in the list
 817 # (prerequisites and ordering are the responsibility of the user)
 818 # globals used:
 819 #   $MODFILE - readable file containing list of modules to process
 820 #              and their optional configuration options
 821 # arguments:
 822 #   (none)
 823 # returns:
 824 #   0 - good
 825 #   1 - bad
 826 process_module_file() {
 827     # preconds
 828     if [ X"$MODFILE" = X ]; then
 829         echo "internal process_module_file() error, \$MODFILE is empty"
 830         return 1
 831     fi
 832     if [ ! -r "$MODFILE" ]; then
 833         echo "module file '$MODFILE' is not readable or does not exist"
 834         return 1
 835     fi
 836
 837     # read from input file, skipping blank and comment lines
 838     while read line; do
 839         # skip blank lines
 840         if [ X"$line" = X ]; then
 841             continue
 842         fi
 843
 844         # skip comment lines
 845         echo "$line" | grep "^#" > /dev/null
 846         if [ $? -eq 0 ]; then
 847             continue
 848         fi
 849
 850         # parse each line to extract module, component and options name
 851         field1=`echo $line | cut -d' ' -f1`
 852         module=`echo $field1 | cut -d'/' -f1`
 853         component=`echo $field1 | cut -d'/' -s -f2`
 854         confopts=`echo $line | cut -d' ' -s -f2-`
 855
 856         build $module "$component" "$confopts"
 857
 858     done <"$MODFILE"
 859
 860     return 0
 861 }
 862
 863 usage() {
 864     basename="`expr "//$0" : '.*/\([^/]*\)'`"
 865     echo "Usage: $basename [options] [prefix]"
 866     echo "Options:"
 867     echo "  -a          Do NOT run auto config tools (autogen.sh, configure)"
 868     echo "  -b          Use .build.unknown build directory"
 869     echo "  -c          Run make clean in addition to \"all install\""
 870     echo "  -D          Run make dist in addition to \"all install\""
 871     echo "  -d          Run make distcheck in addition \"all install\""
 872     echo "  -g          Compile and link with debug information"
 873     echo "  -h, --help  Display this help and exit successfully"
 874     echo "  -n          Do not quit after error; just print error message"
 875     echo "  -o module/component"
 876     echo "              Build just this module/component"
 877     echo "  -p          Update source code before building (git pull --rebase)"
 878     echo "  -s sudo     The command name providing superuser privilege"
 879     echo "  --autoresume resumefile"
 880     echo "              Append module being built to, and autoresume from, <file>"
 881     echo "  --check     Run make check in addition \"all install\""
 882     echo "  --clone     Clone non-existing repositories (uses \$GITROOT if set)"
 883     echo "  --cmd command"
 884     echo "              Execute arbitrary git, gmake, or make command"
 885     echo "  --confflags options"
 886     echo "              Pass options to autgen.sh/configure of all modules"
 887     echo "  --modfile modulefile"
 888     echo "              Only process the module/components specified in modulefile"
 889     echo "              Any text after, and on the same line as, the module/component"
 890     echo "              is assumed to be configuration options for the configuration"
 891     echo "              of each module/component specifically"
 892     echo "  --retry-v1  Remake 'all' on failure with Automake silent rules disabled"
 893     echo ""
 894     echo "Usage: $basename -L"
 895     echo "  -L          Just list modules to build"
 896     echo ""
 897     envoptions
 898 }
 899
 900 # Ensure the named variable value contains a full path name
 901 # arguments:
 902 #   $1 - the variable value (the path to examine)
 903 #   $2 - the name of the variable
 904 # returns:
 905 #   returns nothing or exit on error with message
 906 check_full_path () {
 907     path=$1
 908     varname=$2
 909     if [ X"`expr $path : "\(.\)"`" != X/ ]; then
 910         echo "The path \"$path\" supplied by \"$varname\" must be a full path name"
 911         echo ""
 912         usage
 913         exit 1
 914     fi
 915 }
 916
 917 # Ensure the named variable value contains a writable directory
 918 # arguments:
 919 #   $1 - the variable value (the path to examine)
 920 #   $2 - the name of the variable
 921 # returns:
 922 #   returns nothing or exit on error with message
 923 check_writable_dir () {
 924     path=$1
 925     varname=$2
 926     if [ X"$SUDO" = X ]; then
 927         if [ ! -d "$path" ] || [ ! -w "$path" ]; then
 928             echo "The path \"$path\" supplied by \"$varname\" must be a writable directory"
 929             echo ""
 930             usage
 931             exit 1
 932         fi
 933     fi
 934 }
 935
 936 # perform sanity checks on cmdline args which require arguments
 937 # arguments:
 938 #   $1 - the option being examined
 939 #   $2 - the argument to the option
 940 # returns:
 941 #   if it returns, everything is good
 942 #   otherwise it exit's
 943 required_arg() {
 944     option=$1
 945     arg=$2
 946     # preconds
 947     if [ X"$option" = X ]; then
 948         echo "internal required_arg() error, missing first argument"
 949         exit 1
 950     fi
 951
 952     # check for an argument
 953     if [ X"$arg" = X ]; then
 954         echo "the '$option' option is missing its required argument"
 955         echo ""
 956         usage
 957         exit 1
 958     fi
 959
 960     # does the argument look like an option?
 961     echo $arg | grep "^-" > /dev/null
 962     if [ $? -eq 0 ]; then
 963         echo "the argument '$arg' of option '$option' looks like an option itself"
 964         echo ""
 965         usage
 966         exit 1
 967     fi
 968 }
 969
 970 #==============================================================================
 971 #                               Build All Modules
 972 # Globals:
 973 #   HOST_OS HOST_CPU
 974 # Arguments:
 975 #   None
 976 # Returns:
 977 #   None
 978 #==============================================================================
 979 build_all_modules() {
 980
 981     build util macros
 982     build font util
 983     build doc xorg-sgml-doctools
 984     build doc xorg-docs
 985     case $HOST_OS in
 986         Darwin)  build proto applewmproto;;
 987         CYGWIN*) build proto windowswmproto;;
 988     esac
 989     build proto bigreqsproto
 990     build proto compositeproto
 991     build proto damageproto
 992     build proto dmxproto
 993     build proto dri2proto
 994     build proto dri3proto
 995     build proto fixesproto
 996     build proto fontsproto
 997     build proto glproto
 998     build proto inputproto
 999     build proto kbproto
1000     build proto presentproto
1001     build proto randrproto
1002     build proto recordproto
1003     build proto renderproto
1004     build proto resourceproto
1005     build proto scrnsaverproto
1006     build proto videoproto
1007     build proto x11proto
1008     build proto xcmiscproto
1009     build proto xextproto
1010     build proto xf86bigfontproto
1011     build proto xf86dgaproto
1012     build proto xf86driproto
1013     build proto xf86vidmodeproto
1014     build proto xineramaproto
1015     build xcb proto
1016     # Required by mesa and depends on xproto
1017     build util makedepend
1018     build lib libxtrans
1019     build lib libXau
1020     build lib libXdmcp
1021     build xcb pthread-stubs
1022     build xcb libxcb
1023     build xcb util
1024     build xcb util-image
1025     build xcb util-keysyms
1026     build xcb util-renderutil
1027     build xcb util-wm
1028     build lib libX11
1029     build lib libXext
1030     case $HOST_OS in
1031         Darwin)  build lib libAppleWM;;
1032         CYGWIN*) build lib libWindowsWM;;
1033     esac
1034     build lib libdmx
1035     build lib libfontenc
1036     build lib libFS
1037     build lib libICE
1038     build lib libSM
1039     build lib libXt
1040     build lib libXmu
1041     build lib libXpm
1042     build lib libXaw
1043     build lib libXaw3d
1044     build lib libXfixes
1045     build lib libXcomposite
1046     build lib libXrender
1047     build lib libXdamage
1048     build lib libXcursor
1049     build lib libXfont
1050     build lib libXft
1051     build lib libXi
1052     build lib libXinerama
1053     build lib libxkbfile
1054     build lib libXrandr
1055     build lib libXRes
1056     build lib libXScrnSaver
1057     case $HOST_OS in
1058         Linux)
1059             build lib libxshmfence
1060             ;;
1061     esac
1062     build lib libXtst
1063     build lib libXv
1064     build lib libXvMC
1065     build lib libXxf86dga
1066     build lib libXxf86vm
1067     build lib libpciaccess
1068     build pixman ""
1069     build mesa drm
1070     build mesa mesa
1071     build data bitmaps
1072     build app appres
1073     build app bdftopcf
1074     build app beforelight
1075     build app bitmap
1076     build app editres
1077     build app fonttosfnt
1078     build app fslsfonts
1079     build app fstobdf
1080     build app iceauth
1081     build app ico
1082     build app listres
1083     build app luit
1084     build app mkcomposecache
1085     build app mkfontdir
1086     build app mkfontscale
1087     build app oclock
1088     build app rgb
1089     build app rendercheck
1090     build app rstart
1091     build app scripts
1092     build app sessreg
1093     build app setxkbmap
1094     build app showfont
1095     build app smproxy
1096     build app twm
1097     build app viewres
1098     build app x11perf
1099     build app xauth
1100     build app xbacklight
1101     build app xbiff
1102     build app xcalc
1103     build app xclipboard
1104     build app xclock
1105     build app xcmsdb
1106     build app xconsole
1107     build app xcursorgen
1108     build app xdbedizzy
1109     build app xditview
1110     build app xdm
1111     build app xdpyinfo
1112     build app xdriinfo
1113     build app xedit
1114     build app xev
1115     build app xeyes
1116     build app xf86dga
1117     build app xfd
1118     build app xfontsel
1119     build app xfs
1120     build app xfsinfo
1121     build app xgamma
1122     build app xgc
1123     build app xhost
1124     build app xinit
1125     build app xinput
1126     build app xkbcomp
1127     build app xkbevd
1128     build app xkbprint
1129     build app xkbutils
1130     build app xkill
1131     build app xload
1132     build app xlogo
1133     build app xlsatoms
1134     build app xlsclients
1135     build app xlsfonts
1136     build app xmag
1137     build app xman
1138     build app xmessage
1139     build app xmh
1140     build app xmodmap
1141     build app xmore
1142     build app xpr
1143     build app xprop
1144     build app xrandr
1145     build app xrdb
1146     build app xrefresh
1147     build app xscope
1148     build app xset
1149     build app xsetmode
1150     build app xsetroot
1151     build app xsm
1152     build app xstdcmap
1153     build app xvidtune
1154     build app xvinfo
1155     build app xwd
1156     build app xwininfo
1157     build app xwud
1158     build xserver ""
1159     case $HOST_OS in
1160         Linux)
1161             build libevdev ""
1162             build libinput ""
1163             ;;
1164     esac
1165     case $HOST_OS in
1166         Linux)
1167             build driver xf86-input-evdev
1168             build driver xf86-input-joystick
1169             build driver xf86-input-libinput
1170             ;;
1171         FreeBSD | NetBSD | OpenBSD | Dragonfly | GNU/kFreeBSD)
1172             build driver xf86-input-joystick
1173             ;;
1174     esac
1175     case $HOST_CPU in
1176         i*86 | amd64 | x86_64 | i86pc)
1177             build driver xf86-input-vmmouse
1178             ;;
1179     esac
1180     case $HOST_OS in
1181         Darwin)
1182             ;;
1183         *)
1184             build driver xf86-input-keyboard
1185             build driver xf86-input-mouse
1186             build driver xf86-input-synaptics
1187             build driver xf86-input-void
1188             case $HOST_OS in
1189                 FreeBSD)
1190                     case $HOST_CPU in
1191                         sparc64)
1192                             build driver xf86-video-sunffb
1193                             ;;
1194                     esac
1195                     ;;
1196                 NetBSD | OpenBSD)
1197                     build driver xf86-video-wsfb
1198                     build driver xf86-video-sunffb
1199                     ;;
1200                 Linux)
1201                     build driver xf86-video-sisusb
1202                     build driver xf86-video-sunffb
1203                     build driver xf86-video-v4l
1204                     build driver xf86-video-xgixp
1205                     case $HOST_CPU in
1206                         i*86)
1207                             # AMD Geode CPU. Driver contains 32 bit assembler code
1208                             build driver xf86-video-geode
1209                             ;;
1210                     esac
1211                     ;;
1212             esac
1213             case $HOST_CPU in
1214                 sparc | sparc64)
1215                     build driver xf86-video-suncg14
1216                     build driver xf86-video-suncg3
1217                     build driver xf86-video-suncg6
1218                     build driver xf86-video-sunleo
1219                     build driver xf86-video-suntcx
1220                     ;;
1221                 i*86 | amd64 | x86_64 | i86pc)
1222                     build driver xf86-video-i740
1223                     build driver xf86-video-intel
1224                     ;;
1225             esac
1226             build driver xf86-video-apm
1227             build driver xf86-video-ark
1228             build driver xf86-video-ast
1229             build driver xf86-video-ati
1230             build driver xf86-video-chips
1231             build driver xf86-video-cirrus
1232             build driver xf86-video-dummy
1233             build driver xf86-video-fbdev
1234             build driver xf86-video-glint
1235             build driver xf86-video-i128
1236             build driver xf86-video-mach64
1237             build driver xf86-video-mga
1238             build driver xf86-video-neomagic
1239             build driver xf86-video-nested
1240             build driver xf86-video-nv
1241             build driver xf86-video-rendition
1242             build driver xf86-video-r128
1243             build driver xf86-video-s3
1244             build driver xf86-video-s3virge
1245             build driver xf86-video-savage
1246             build driver xf86-video-siliconmotion
1247             build driver xf86-video-sis
1248             build driver xf86-video-tdfx
1249             build driver xf86-video-tga
1250             build driver xf86-video-trident
1251             build driver xf86-video-tseng
1252             build driver xf86-video-vesa
1253             build driver xf86-video-vmware
1254             build driver xf86-video-voodoo
1255             ;;
1256     esac
1257     build data cursors
1258     build font encodings
1259     build font adobe-100dpi
1260     build font adobe-75dpi
1261     build font adobe-utopia-100dpi
1262     build font adobe-utopia-75dpi
1263     build font adobe-utopia-type1
1264     build font arabic-misc
1265     build font bh-100dpi
1266     build font bh-75dpi
1267     build font bh-lucidatypewriter-100dpi
1268     build font bh-lucidatypewriter-75dpi
1269     build font bh-ttf
1270     build font bh-type1
1271     build font bitstream-100dpi
1272     build font bitstream-75dpi
1273     build font bitstream-type1
1274     build font cronyx-cyrillic
1275     build font cursor-misc
1276     build font daewoo-misc
1277     build font dec-misc
1278     build font ibm-type1
1279     build font isas-misc
1280     build font jis-misc
1281     build font micro-misc
1282     build font misc-cyrillic
1283     build font misc-ethiopic
1284     build font misc-meltho
1285     build font misc-misc
1286     build font mutt-misc
1287     build font schumacher-misc
1288     build font screen-cyrillic
1289     build font sony-misc
1290     build font sun-misc
1291     build font winitzki-cyrillic
1292     build font xfree86-type1
1293     build font alias
1294     build util cf
1295     build util imake
1296     build util gccmakedep
1297     build util lndir
1298     build xkeyboard-config ""
1299     return 0
1300 }
1301
1302
1303 #------------------------------------------------------------------------------
1304 #                       Script main line
1305 #------------------------------------------------------------------------------
1306
1307 # Initialize variables controlling end of run reports
1308 failed_components=""
1309 nonexistent_components=""
1310 clonefailed_components=""
1311
1312 # Set variables supporting multiple binaries for a single source tree
1313 HAVE_ARCH="`uname -i`"
1314 DIR_ARCH=""
1315 DIR_CONFIG="."
1316
1317 # Set variables for conditionally building some components
1318 HOST_OS=`uname -s`
1319 export HOST_OS
1320 HOST_CPU=`uname -m`
1321 export HOST_CPU
1322
1323 # Process command line args
1324 while [ $# != 0 ]
1325 do
1326     case $1 in
1327     -a)
1328         NOAUTOGEN=1
1329         ;;
1330     -b)
1331         DIR_ARCH=".build.$HAVE_ARCH"
1332         DIR_CONFIG=".."
1333         ;;
1334     -c)
1335         CLEAN=1
1336         ;;
1337     -D)
1338         DIST=1
1339         ;;
1340     -d)
1341         DISTCHECK=1
1342         ;;
1343     -g)
1344         CFLAGS="${CFLAGS} -g3 -O0"
1345         ;;
1346     -h|--help)
1347         usage
1348         exit 0
1349         ;;
1350     -L)
1351         LISTONLY=1
1352         ;;
1353     -n)
1354         NOQUIT=1
1355         ;;
1356     -o)
1357         if [ -n "$BUILT_MODULES_FILE" ]; then
1358             echo "The '-o' and '--autoresume' options are mutually exclusive."
1359             usage
1360             exit 1
1361         fi
1362         required_arg $1 $2
1363         shift
1364         RESUME=`echo $1 | sed "s,/$,,"`
1365         BUILD_ONE=1
1366         ;;
1367     -p)
1368         PULL=1
1369         ;;
1370     -s)
1371         required_arg $1 $2
1372         shift
1373         SUDO=$1
1374         ;;
1375     --autoresume)
1376         if [ -n "$BUILD_ONE" ]; then
1377             echo "The '-o' and '--autoresume' options are mutually exclusive."
1378             usage
1379             exit 1
1380         fi
1381         required_arg $1 $2
1382         shift
1383         BUILT_MODULES_FILE=$1
1384         ;;
1385     --check)
1386         CHECK=1
1387         ;;
1388     --clone)
1389         CLONE=1
1390         ;;
1391     --cmd)
1392         required_arg $1 $2
1393         shift
1394         cmd1=`echo $1 | cut -d' ' -f1`
1395         cmd2=`echo $1 | cut -d' ' -f2`
1396
1397         # verify the command exists
1398         which $cmd1 > /dev/null 2>&1
1399         if [ $? -ne 0 ]; then
1400             echo "The specified command '$cmd1' does not appear to exist"
1401             echo ""
1402             usage
1403             exit 1
1404         fi
1405
1406         case X"$cmd1" in
1407             X"git")
1408                 GITCMD=$1
1409                 ;;
1410             X"make" | X"gmake")
1411                 MAKECMD=$cmd2
1412                 ;;
1413             *)
1414                 echo "The script can only process 'make', 'gmake', or 'git' commands"
1415                 echo "It can't process '$cmd1' commands"
1416                 echo ""
1417                 usage
1418                 exit 1
1419                 ;;
1420         esac
1421         ;;
1422     --confflags)
1423         shift
1424         CONFFLAGS=$1
1425         ;;
1426     --modfile)
1427         required_arg $1 $2
1428         shift
1429         if [ ! -r "$1" ]; then
1430             echo "can't find/read file '$1'"
1431             exit 1
1432         fi
1433         MODFILE=$1
1434         ;;
1435     --retry-v1)
1436         RETRY_VERBOSE=1
1437         ;;
1438     *)
1439         if [ X"$too_many" = Xyes ]; then
1440             echo "unrecognized and/or too many command-line arguments"
1441             echo "  PREFIX:               $PREFIX"
1442             echo "  Extra arguments:      $1"
1443             echo ""
1444             usage
1445             exit 1
1446         fi
1447
1448         # check that 'prefix' doesn't look like an option
1449         echo $1 | grep "^-" > /dev/null
1450         if [ $? -eq 0 ]; then
1451             echo "'prefix' appears to be an option"
1452             echo ""
1453             usage
1454             exit 1
1455         fi
1456
1457         PREFIX=$1
1458         too_many=yes
1459         ;;
1460     esac
1461
1462     shift
1463 done
1464
1465 # All user input has been obtained, set-up the user shell variables
1466 if [ X"$LISTONLY" = X ]; then
1467     setup_buildenv
1468     echo "Building to run $HOST_OS / $HOST_CPU ($HOST)"
1469     date
1470 fi
1471
1472 # if   there is a BUILT_MODULES_FILE
1473 # then start off by checking for and trying to build any modules which failed
1474 #      and aren't the last line
1475 if [ X"$BUILT_MODULES_FILE" != X -a -r "$BUILT_MODULES_FILE" ]; then
1476     built_lines=`cat $BUILT_MODULES_FILE | wc -l | sed 's:^ *::'`
1477     built_lines_m1=`expr $built_lines - 1`
1478     orig_BUILT_MODULES_FILE=$BUILT_MODULES_FILE
1479     unset BUILT_MODULES_FILE
1480     curline=1
1481     while read line; do
1482         built_status=`echo $line | cut -c-6`
1483         if [ X"$built_status" = X"FAIL: " ]; then
1484             line=`echo $line | cut -c7-`
1485             field1=`echo $line | cut -d' ' -f1`
1486             module=`echo $field1 | cut -d'/' -f1`
1487             component=`echo $field1 | cut -d'/' -s -f2`
1488             confopts=`echo $line | cut -d' ' -s -f2-`
1489
1490             build_ret=""
1491
1492             # quick check for the module in $MODFILE (if present)
1493             if [ X"$MODFILE" = X ]; then
1494                 build $module "$component" "$confopts"
1495                 if [ $? -eq 0 ]; then
1496                     build_ret="PASS"
1497                 fi
1498             else
1499                 cat $MODFILE | grep "$module${component:+/}$component" > /dev/null
1500                 if [ $? -eq 0 ]; then
1501                     build $module "$component" "$confopts"
1502                     if [ $? -eq 0 ]; then
1503                         build_ret="PASS"
1504                     fi
1505                 fi
1506             fi
1507
1508             if [ X"$build_ret" = X"PASS" ]; then
1509                 built_temp=`mktemp`
1510                 if [ $? -ne 0 ]; then
1511                     echo "can't create tmp file, $orig_BUILT_MODULES_FILE not modified"
1512                 else
1513                     head -n `expr $curline - 1` $orig_BUILT_MODULES_FILE > $built_temp
1514                     echo "PASS: $module${component:+/}$component" >> $built_temp
1515                     tail -n `expr $built_lines - $curline` $orig_BUILT_MODULES_FILE >> $built_temp
1516                     mv $built_temp $orig_BUILT_MODULES_FILE
1517                 fi
1518             fi
1519         fi
1520         if [ $curline -eq $built_lines_m1 ]; then
1521             break
1522         fi
1523         curline=`expr $curline + 1`
1524     done <"$orig_BUILT_MODULES_FILE"
1525
1526     BUILT_MODULES_FILE=$orig_BUILT_MODULES_FILE
1527     RESUME=`tail -n 1 $BUILT_MODULES_FILE | cut -c7-`
1528
1529     # remove last line of $BUILT_MODULES_FILE
1530     # to avoid a duplicate entry
1531     built_temp=`mktemp`
1532     if [ $? -ne 0 ]; then
1533         echo "can't create tmp file, last built item will be duplicated"
1534     else
1535         head -n $built_lines_m1 $BUILT_MODULES_FILE > $built_temp
1536         mv $built_temp $BUILT_MODULES_FILE
1537     fi
1538 fi
1539
1540 if [ X"$MODFILE" = X ]; then
1541     build_all_modules
1542 else
1543     process_module_file
1544 fi
1545
1546 if [ X"$LISTONLY" != X ]; then
1547     exit 0
1548 fi
1549
1550 # Print the end date/time to compare with the start date/time
1551 date
1552
1553 # Report about components that failed for one reason or another
1554 if [ X"$nonexistent_components" != X ]; then
1555     echo ""
1556     echo "***** Skipped components (not available) *****"
1557         echo "Could neither find a git repository (at the <module/component> paths)"
1558         echo "or a tarball (at the <module/> paths or ./) for:"
1559         echo "    <module/component>"
1560     for mod in $nonexistent_components; do
1561         echo "    $mod"
1562     done
1563     echo "You may want to provide the --clone option to build.sh"
1564     echo "to automatically git-clone the missing components"
1565     echo ""
1566 fi
1567
1568 if [ X"$failed_components" != X ]; then
1569     echo ""
1570     echo "***** Failed components *****"
1571     for mod in $failed_components; do
1572         echo "    $mod"
1573     done
1574     echo ""
1575 fi
1576
1577 if [ X"$CLONE" != X ] && [ X"$clonefailed_components" != X ];  then
1578     echo ""
1579     echo "***** Components failed to clone *****"
1580     for mod in $clonefailed_components; do
1581         echo "    $mod"
1582     done
1583     echo ""
1584 fi
1585