bootstrap

   1 #!/bin/sh
   2 # bootstrap a xapian source tree obtained from git to produce a tree like
   3 # you'd get from unpacking the results of "make dist"
   4 #
   5 # Copyright (C) 2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016 Olly Betts
   6 #
   7 # This program is free software; you can redistribute it and/or
   8 # modify it under the terms of the GNU General Public License as
   9 # published by the Free Software Foundation; either version 2 of the
  10 # License, or (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301
  20 # USA
  21
  22 if [ "$1" = "--help" ] ; then
  23   cat <<__END__
  24 $0 [--ftp] [--without-autotools|--clean] [MODULE...]
  25
  26 The default is to bootstrap all known modules.  Any modules which have a
  27 file called ".nobootstrap" in their top-level will be skipped.
  28 __END__
  29   exit 0
  30 fi
  31
  32 trap 'echo "Bootstrap failed"' EXIT
  33 set -e
  34
  35 # The variables which specify the autotools to use.
  36 autotools="AUTORECONF AUTOCONF AUTOHEADER AUTOM4TE AUTOMAKE ACLOCAL LIBTOOLIZE"
  37
  38 # Tool for downloading a file from a URL (currently wget or curl).
  39 FETCH_URL_TOOL=
  40
  41 check_sha1sum() {
  42   checksum=$1
  43   tarball=$2
  44
  45   if [ -z "$SHA1SUM_TOOL" ] ; then
  46     for SHA1SUM_TOOL in \
  47         '${SHA1SUM-sha1sum} 2>/dev/null|cut -d\  -f1' \
  48         '${SHASUM-shasum} 2>/dev/null|cut -d\  -f1' \
  49         '$(OPENSSL-openssl} sha1 2>/dev/null|sed "s/.* //"' \
  50         '' ; do
  51       if [ -z "$SHA1SUM_TOOL" ] ; then
  52         echo <<'END'
  53 Need sha1sum or shasum or openssl installed to check SHA1 checksums.
  54 Set environment variable SHA1SUM, SHASUM or OPENSSL if the tool isn't on
  55 your PATH.
  56 END
  57         exit 1
  58       fi
  59       r=`:|eval "$SHA1SUM_TOOL"`
  60       [ X"$r" != Xda39a3ee5e6b4b0d3255bfef95601890afd80709 ] || break
  61     done
  62   fi
  63   r=`< $tarball eval "$SHA1SUM_TOOL"`
  64   if [ X"$r" != X"$checksum" ] ; then
  65     echo "$tarball: computed SHA1 checksum did NOT match"
  66     echo "computed: $r with $SHA1SUM_TOOL"
  67     echo "expected: $checksum"
  68     ls -l $tarball
  69     file $tarball || true
  70     mv "$tarball" "$tarball.$r"
  71     echo "Renamed $tarball to $tarball.$r"
  72     exit 1
  73   fi
  74 }
  75
  76 lazy_build() {
  77   package=$1
  78   basename=$package-$2
  79   ext=$3
  80   checksum=$4
  81   if [ "$ext" = "tar.xz" ] ; then
  82     if [ -z "$xz_ok" ] ; then
  83       if ${XZ-xz} --version > /dev/null 2>&1 ; then
  84         xz_ok=1
  85       else
  86         xz_ok=0
  87       fi
  88     fi
  89     if [ "$xz_ok" = 0 ] ; then
  90       shift 2
  91       ext=$3
  92       checksum=$4
  93     fi
  94   fi
  95   if [ "$ext" = "tar.bz2" ] ; then
  96     if [ -z "$bz2_ok" ] ; then
  97       # bzip2 --version doesn't exit with code 0 in upstream version (though
  98       # Debian at least patch this bug), so use --help to check it.
  99       if bzip2 --help > /dev/null 2>&1 ; then
 100         bz2_ok=1
 101       else
 102         bz2_ok=0
 103       fi
 104     fi
 105     if [ "$bz2_ok" = 0 ] ; then
 106       shift 2
 107       ext=$3
 108       checksum=$4
 109     fi
 110   fi
 111   tarball=$basename.$ext
 112   case $basename in
 113     *[24680][a-z]) basename=`echo "$basename"|sed 's/[a-z]$//'` ;;
 114   esac
 115
 116   # Create the stamp file in INST so that rerunning bootstrap after
 117   # "rm -rf INST" recovers nicely.
 118   stamp=../INST/$package.stamp
 119
 120   # Download the tarball if required.
 121   if [ ! -f "$tarball" ] ; then
 122     if [ -z "$FETCH_URL_TOOL" ] ; then
 123       if ${WGET-wget} --version > /dev/null 2>&1 ; then
 124         FETCH_URL_TOOL="${WGET-wget} -O-"
 125       elif ${CURL-curl} --version > /dev/null 2>&1 || [ "$?" = 2 ] ; then
 126         # curl --version exits with code 2.
 127         # -L is needed to follow HTTP redirects.
 128         FETCH_URL_TOOL="${CURL-curl} -L"
 129       elif ${LWP_REQUEST-lwp-request} -v > /dev/null 2>&1 || [ "$?" = 9 -o "$?" = 255 ] ; then
 130         # lwp-request -v exits with code 9 (5.810) or 255 (6.03)
 131         FETCH_URL_TOOL="${LWP_REQUEST-lwp-request} -mGET"
 132       else
 133         cat <<END >&2
 134 Neither wget nor curl nor lwp-request found - install one of them or if already
 135 installed, set WGET, CURL or LWP_REQUEST to the full path.  Alternatively,
 136 download $url
 137 to directory `pwd`
 138 then rerun this script.
 139 END
 140         exit 1
 141       fi
 142     fi
 143     case $basename in
 144     file-*)
 145       if [ "$use_ftp" = yes ] ; then
 146         url="ftp://ftp.astron.com/pub/file/$tarball"
 147       else
 148         url="http://fossies.org/unix/misc/$tarball"
 149       fi ;;
 150     *[13579][a-z])
 151       # GNU alpha release
 152       if [ "$use_ftp" = yes ] ; then
 153         url="ftp://alpha.gnu.org/gnu/$package/$tarball"
 154       else
 155         url="http://alpha.gnu.org/gnu/$package/$tarball"
 156       fi ;;
 157     *)
 158       if [ "$use_ftp" = yes ] ; then
 159         url="ftp://ftp.gnu.org/gnu/$package/$tarball"
 160       else
 161         url="http://ftpmirror.gnu.org/$package/$tarball"
 162       fi ;;
 163     esac
 164     rm -f download.tmp
 165     echo "Downloading <$url>"
 166     $FETCH_URL_TOOL "$url" > download.tmp && mv download.tmp "$tarball"
 167   fi
 168
 169   if [ -f "$stamp" ] ; then
 170     find_stdout=`find "$tarball" ../patches/"$package"/* -newer "$stamp" -print 2> /dev/null||true`
 171   else
 172     find_stdout=force
 173   fi
 174
 175   if [ -n "$find_stdout" ] ; then
 176     # Verify the tarball's checksum before building it.
 177     check_sha1sum "$checksum" "$tarball"
 178
 179     # Remove tarballs of other versions.
 180     for f in "$package"-* ; do
 181       [ "$f" = "$tarball" ] || rm -rf "$f"
 182     done
 183
 184     case $ext in
 185     tar.xz)
 186       ${XZ-xz} -dc "$tarball"| tar xf - ;;
 187     tar.bz2)
 188       bzip2 -dc "$tarball"| tar xf - ;;
 189     *)
 190       gzip -dc "$tarball"| tar xf - ;;
 191     esac
 192
 193     cd "$basename"
 194
 195     if [ ! -f "../../patches/$package/series" ] ; then
 196       cat <<END >&2
 197 No patch series file 'patches/$package/series' - if there are no patches,
 198 this should just be an empty file.
 199 END
 200       exit 1
 201     fi
 202     echo "Applying patches from $package/series"
 203     sed -n 's/[  ]*\(#.*\)\?$//;/./p' "../../patches/$package/series" | \
 204         while read p ; do
 205       echo "Applying patch $package/$p"
 206       patch -p1 < "../../patches/$package/$p"
 207     done
 208
 209     if test -n "$AUTOCONF" ; then
 210       ./configure --prefix "$instdir" AUTOCONF="$AUTOCONF"
 211     else
 212       ./configure --prefix "$instdir"
 213     fi
 214     make
 215     make install
 216     cd ..
 217     rm -rf "$basename"
 218
 219     touch "$stamp"
 220   fi
 221 }
 222
 223 handle_git_external() {
 224   path=$1
 225   if [ ! -f "$path/.nobootstrap" ] ; then
 226     rev=$2
 227     url=$3
 228     if [ ! -d "$path" ] ; then
 229       git clone --no-checkout -- "$url" "$path"
 230     elif (cd "$path" && git reflog "$rev" -- 2>/dev/null) ; then
 231       : # Already have that revision locally
 232     else
 233       (cd "$path" && git fetch)
 234     fi
 235     (cd "$path" && git checkout "$rev")
 236   fi
 237 }
 238
 239 update_config() {
 240   from=$1
 241   to=$2
 242   ts_from=`perl -ne '/^timestamp=(\W?)([-\d]+)$1/ and do {$_=$2;y/-//d;print;exit}' "$from"`
 243   ts_to=`perl -ne '/^timestamp=(\W?)([-\d]+)$1/ and do {$_=$2;y/-//d;print;exit}' "$to"`
 244   if [ "$ts_from" -gt "$ts_to" ] ; then
 245      echo "Updating $to ($ts_to) with $from ($ts_from)"
 246      # rm first in case the existing file is a symlink.
 247      rm -f "$to"
 248      cp "$from" "$to"
 249   fi
 250 }
 251
 252 curdir=`pwd`
 253
 254 # cd to srcdir if we aren't already there.
 255 srcdir=`echo "$0"|sed 's!/*[^/]*$!!'`
 256 case $srcdir in
 257   ""|.)
 258     srcdir=. ;;
 259   *)
 260     cd "$srcdir" ;;
 261 esac
 262
 263 # Commit hash to pass to handle_git_external for swig.
 264 swig_git_commit_hash=bab51398053188a136effd155d7ed8f5d441908e
 265
 266 if [ ! -d .git ] ; then
 267   echo "$0: No '.git' directory found - this script should be run from a"
 268   echo "git repo cloned from git://git.xapian.org/xapian or a mirror of it"
 269   exit 1
 270 fi
 271
 272 for emptydir in xapian-applications/omega/m4 xapian-bindings/m4 xapian-letor/m4 ; do
 273   if test -d "$emptydir" ; then
 274     :
 275   else
 276     parent=`echo "$emptydir"|sed 's,/[^/]*$,,'`
 277     if test -d "$parent" ; then
 278       mkdir "$emptydir"
 279     fi
 280   fi
 281 done
 282
 283 if [ -f .git/info/exclude ] ; then
 284   sed '/^\(swig\|xapian-applications\/omega\/common$\)/d' .git/info/exclude > .git/info/exclude~
 285 else
 286   [ -d .git/info ] || mkdir .git/info
 287 fi
 288 cat <<END >> .git/info/exclude~
 289 swig
 290 xapian-applications/omega/common
 291 xapian-letor/common
 292 END
 293 if [ -f .git/info/exclude ] &&
 294    cmp -s .git/info/exclude~ .git/info/exclude ; then
 295   rm .git/info/exclude~
 296 else
 297   mv .git/info/exclude~ .git/info/exclude
 298 fi
 299
 300 # If this tree is checked out from the github mirror, use the same access
 301 # method for other things checked out from github (e.g. swig) so we avoid
 302 # firewall issues.  If there's no default remote, the git config command
 303 # will exit with status 1, so ignore that failure.
 304 origin_url=`git config remote.origin.url||:`
 305 case $origin_url in
 306   *[@/]github.com[:/]*)
 307     github_base_url=`echo "X$origin_url"|sed 's/^X//;s!\([@/]github.com[:/]\).*!\1!'` ;;
 308   *)
 309     github_base_url=https://github.com/ ;;
 310 esac
 311 swig_origin_url=${github_base_url}swig/swig.git
 312 handle_git_external swig "$swig_git_commit_hash" "$swig_origin_url"
 313
 314 if [ -z "$XAPIAN_COMMON_CLONE_URL" ] ; then
 315     xapian_common_clone_url=.
 316 else
 317     xapian_common_clone_url=$XAPIAN_COMMON_CLONE_URL
 318 fi
 319
 320 # If someone's created a directory for common, leave it be.
 321 if [ -h xapian-applications/omega/common ] || \
 322    [ ! -d xapian-applications/omega/common ] ; then
 323   handle_git_external xapian-applications/omega/.common.git bddcf54435286b0363efff94f22529093e85fc89 "$xapian_common_clone_url"
 324   ln -sf .common.git/xapian-core/common xapian-applications/omega/common
 325 fi
 326
 327 # If someone's created a directory for common, leave it be.
 328 if [ -h xapian-letor/common ] || [ ! -d xapian-letor/common ] ; then
 329   handle_git_external xapian-letor/.common.git bddcf54435286b0363efff94f22529093e85fc89 "$xapian_common_clone_url"
 330   ln -sf .common.git/xapian-core/common xapian-letor/common
 331 fi
 332
 333 # Prefer http downloads as they are more likely to work through firewalls.
 334 use_ftp=no
 335 if [ "$1" = "--ftp" ] ; then
 336   shift
 337   use_ftp=yes
 338 fi
 339
 340 if [ "$1" = "--without-autotools" ] ; then
 341   shift
 342 else
 343   if [ "$1" = "--clean" ] ; then
 344     shift
 345     rm -rf INST
 346   fi
 347
 348   [ -d INST ] || mkdir INST
 349   instdir=`pwd`/INST
 350
 351   [ -d BUILD ] || mkdir BUILD
 352   cd BUILD
 353
 354   # The last field is the SHA1 checksum of the tarball.
 355   lazy_build autoconf 2.69 \
 356     tar.xz e891c3193029775e83e0534ac0ee0c4c711f6d23 \
 357     tar.gz 562471cbcb0dd0fa42a76665acf0dbb68479b78a
 358   AUTOCONF=$instdir/bin/autoconf \
 359   lazy_build automake 1.15 \
 360     tar.xz c279b35ca6c410809dac8ade143b805fb48b7655 \
 361     tar.gz b5a840c7ec4321e78fdc9472e476263fa6614ca1
 362   lazy_build libtool 2.4.6 \
 363     tar.xz 3e7504b832eb2dd23170c91b6af72e15b56eb94e \
 364     tar.gz 25b6931265230a06f0fc2146df64c04e5ae6ec33
 365   if [ "$1" = "--deps=libmagic" ] ; then
 366       shift
 367       lazy_build file 5.25 \
 368         tar.gz fea78106dd0b7a09a61714cdbe545135563e84bd
 369   fi
 370
 371   for v in $autotools ; do
 372      tool=`echo "$v"|tr A-Z a-z`
 373      eval "$v=\"\$instdir\"/bin/$tool;export $v"
 374   done
 375
 376   cd ..
 377 fi
 378
 379 case `${LIBTOOLIZE-libtoolize} --version` in
 380 "")
 381   echo "${LIBTOOLIZE-libtoolize} not found"
 382   exit 1 ;;
 383 "libtoolize (GNU libtool) 1.4.*")
 384   echo "${LIBTOOLIZE-libtoolize} is from libtool 1.4 which is too old - libtool 2.2 is required."
 385   echo "If you have both installed, set LIBTOOLIZE to point to the correct version."
 386   exit 1 ;;
 387 "libtoolize (GNU libtool) 1.5.*")
 388   echo "${LIBTOOLIZE-libtoolize} is from libtool 1.5 which is too old - libtool 2.2 is required."
 389   echo "If you have both installed, set LIBTOOLIZE to point to the correct version."
 390   exit 1 ;;
 391 esac
 392
 393 ACLOCAL="${ACLOCAL-aclocal} -I `pwd`/xapian-core/m4-macros"
 394 export ACLOCAL
 395
 396 intree_swig=no
 397 modules=
 398 for module in ${@:-xapian-core xapian-applications/omega swig xapian-bindings xapian-letor} ; do
 399   d=$module
 400   if [ -f "$d/configure.ac" -o -f "$d/configure.in" ] ; then
 401     :
 402   else
 403     # Skip any directories we can't bootstrap.
 404     continue
 405   fi
 406   if [ -f "$d/.nobootstrap" ] ; then
 407     # Report why to save head scratching when someone forgets they created
 408     # a .nobootstrap file.
 409     echo "Skipping '$module' due to presence of '$d/.nobootstrap'."
 410     continue
 411   fi
 412   if [ "$d" = swig ] && [ -f "xapian-bindings/.nobootstrap" ] ; then
 413     # No point bootstrapping SWIG if we aren't going to use it.
 414     echo "Skipping '$d' due to presence of 'xapian-bindings/.nobootstrap'."
 415     continue
 416   fi
 417   echo "Bootstrapping \`$module'"
 418   [ -f "$d/preautoreconf" ] && "$d/preautoreconf"
 419
 420   # If we have a custom INSTALL file, preserve it since autoreconf insists on
 421   # replacing INSTALL with "generic installation instructions" when --force
 422   # is used.  Be careful to replace it if autoreconf fails.
 423   if [ -f "$d/INSTALL" ] ; then
 424     if grep 'generic installation instructions' "$d/INSTALL" >/dev/null 2>&1 ; then
 425       :
 426     else
 427       mv -f "$d/INSTALL" "$d/INSTALL.preserved-by-bootstrap"
 428     fi
 429   fi
 430
 431   autoreconf_rc=
 432   if [ swig = "$module" ] ; then
 433     # SWIG provides its own bootstrapping script.
 434     curdir=`pwd`
 435     cd "$d"
 436     ./autogen.sh || autoreconf_rc=$?
 437     cd "$curdir"
 438     # Use the uninstalled wrapper for the in-tree copy of SWIG.
 439     intree_swig=yes
 440   else
 441     # Use --install as debian's autoconf wrapper uses 2.5X if it sees it
 442     # (but it doesn't check for -i).
 443     #
 444     # Use --force so that we update files if autoconf, automake, or libtool
 445     # has been upgraded.
 446     ${AUTORECONF-autoreconf} --install --force "$d" || autoreconf_rc=$?
 447   fi
 448   if [ -f "$d/INSTALL.preserved-by-bootstrap" ] ; then
 449     mv -f "$d/INSTALL.preserved-by-bootstrap" "$d/INSTALL"
 450   fi
 451   if [ -n "$autoreconf_rc" ] ; then
 452     exit $autoreconf_rc
 453   fi
 454   for f in config.guess config.sub ; do
 455     if [ -f "$d/$f" ] ; then
 456       update_config "config/$f" "$d/$f"
 457     fi
 458   done
 459   modules="$modules $module"
 460 done
 461
 462 # Generate the top-level configure script.
 463 rm -f configure.tmp
 464 cat <<'TOP_OF_CONFIGURE' > configure.tmp
 465 #!/bin/sh
 466 # configure each submodule in a xapian source tree
 467 # Generated by Xapian top-level bootstrap script.
 468 #
 469 # Copyright (C) 2003,2004,2007,2008 Olly Betts
 470 #
 471 # This program is free software; you can redistribute it and/or
 472 # modify it under the terms of the GNU General Public License as
 473 # published by the Free Software Foundation; either version 2 of the
 474 # License, or (at your option) any later version.
 475 #
 476 # This program is distributed in the hope that it will be useful,
 477 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 478 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 479 # GNU General Public License for more details.
 480 #
 481 # You should have received a copy of the GNU General Public License
 482 # along with this program; if not, write to the Free Software
 483 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301
 484 # USA
 485
 486 trap 'echo "configure failed"' EXIT
 487 set -e
 488
 489 # Produced escaped version of command suitable for pasting back into sh
 490 cmd=$0
 491 for a ; do
 492  case $a in
 493   *[^-A-Za-z0-9_+=:@/.,]*)
 494    esc_a=`echo "$a"|sed 's!\([^-A-Za-z0-9_+=:@/.,]\)!\\\\\\1!g'`
 495    cmd="$cmd $esc_a" ;;
 496   *)
 497    cmd="$cmd $a" ;;
 498  esac
 499 done
 500
 501 here=`pwd`
 502 TOP_OF_CONFIGURE
 503
 504 # Produce an absolute path to srcdir.
 505 srcdir_abs=`pwd`
 506 # This section is unquoted so we can substitute variables.
 507 cat <<MIDDLE_OF_CONFIGURE >> configure.tmp
 508 srcdir="$srcdir_abs"
 509 modules="$modules"
 510 MIDDLE_OF_CONFIGURE
 511
 512 vars=
 513 if [ yes = "$intree_swig" ] ; then
 514   # We want the path to SWIG to point into srcdir, which isn't known until
 515   # configure-time, so we need to expand $here in configure.  We can't just set
 516   # SWIG here and let the case below handle it as that would escape the value
 517   # such that $here didn't get expanded at all.
 518   echo ': ${SWIG="$here/swig/preinst-swig"}' >> configure.tmp
 519   echo "export SWIG" >> configure.tmp
 520   vars=' SWIG=$here/swig/preinst-swig'
 521   # Kill any existing setting of SWIG so that we don't try to handle it again
 522   # below.
 523   SWIG=
 524 fi
 525 for tool in SWIG $autotools ; do
 526   eval "val=\$$tool"
 527   if [ -n "$val" ] ; then
 528     echo ': ${'"$tool='$val'"'}' >> configure.tmp
 529     echo "export $tool" >> configure.tmp
 530     vars="$vars $tool='"`echo "$val"|sed 's/\(['"\\'"']\)/\\\1/g'`"'"
 531   fi
 532 done
 533 if [ -n "$vars" ] ; then
 534   # $vars will always have a leading space.
 535   echo "set$vars "'"$@"' >> configure.tmp
 536 fi
 537
 538 cat <<'END_OF_CONFIGURE' >> configure.tmp
 539 dirs=
 540 revdirs=
 541 XAPIAN_CONFIG=$here/xapian-core/xapian-config
 542 for d in $modules ; do
 543   if [ "$here" = "$srcdir" ] ; then
 544     configure=./configure
 545     configure_from_here=$d/configure
 546   else
 547     configure=$srcdir/$d/configure
 548     configure_from_here=$configure
 549   fi
 550   if [ -f "$configure_from_here" ] ; then
 551     if [ -d "$d" ] ; then : ; else
 552       case $d in
 553       xapian-applications/*) [ -d xapian-applications ] || mkdir xapian-applications ;;
 554       esac
 555       mkdir "$d"
 556     fi
 557     echo "Configuring \`$d'"
 558     # Use a shared config.cache for speed and to save a bit of diskspace, but
 559     # don't share it with SWIG just in case it manages to probe and cache
 560     # different answers (e.g. because it uses a C compiler).
 561     case $d in
 562     swig)
 563       cd "$d" && "$configure" ${1+"$@"}
 564       ;;
 565     xapian-core)
 566       cd "$d" && "$configure" --enable-maintainer-mode --disable-option-checking --cache-file="$here/config.cache" ${1+"$@"}
 567       ;;
 568     xapian-applications/omega)
 569       cd "$d" && "$configure" --enable-maintainer-mode --disable-option-checking XAPIAN_CONFIG="$XAPIAN_CONFIG" CPPFLAGS="-I$srcdir/INST/include" LDFLAGS="-L$srcdir/INST/lib" ${1+"$@"}
 570       ;;
 571     *)
 572       cd "$d" && "$configure" --enable-maintainer-mode --disable-option-checking --cache-file="$here/config.cache" XAPIAN_CONFIG="$XAPIAN_CONFIG" ${1+"$@"}
 573       ;;
 574     esac
 575     cd "$here"
 576     dirs="$dirs $d"
 577     revdirs="$d $revdirs"
 578   fi
 579 done
 580
 581 case " $* " in
 582   *" --help "*|*" --version "*)
 583     # Don't generate Makefile if --help or --version specified.
 584     trap - EXIT
 585     exit 0
 586     ;;
 587 esac
 588
 589 rm -f Makefile.tmp
 590 cat <<EOF > Makefile.tmp
 591 # Makefile generated by:
 592 CONFIGURE_COMMAND := $cmd
 593 EOF
 594 if [ "$srcdir" != . ] ; then
 595     cat <<EOF >> Makefile.tmp
 596
 597 VPATH = $srcdir
 598 EOF
 599 fi
 600 targets='all install uninstall install-strip clean distclean mostlyclean maintainer-clean dist check distcheck'
 601 for target in $targets ; do
 602   echo
 603   echo "$target:"
 604   case $target in
 605     uninstall|*clean)
 606       # When uninstalling or cleaning, process directories in reverse order, so
 607       # that we process a directory after any directories which might use it.
 608       list=$revdirs ;;
 609     *)
 610       list=$dirs ;;
 611   esac
 612   for d in $list ; do
 613     case $d,$target in
 614     swig,install*|swig,uninstall)
 615       # Nothing to do with swig when installing/uninstalling.
 616       ;;
 617     swig,dist|swig,check|swig,distcheck|swig,all)
 618       # Need to ensure swig is built before "make dist", "make check", etc.
 619       echo "    cd $d && \$(MAKE)" ;;
 620     swig,mostlyclean)
 621       echo "    cd $d && \$(MAKE) clean" ;;
 622     xapian-bindings,distcheck)
 623       # FIXME: distcheck doesn't currently work for xapian-bindings because
 624       # xapian-core isn't installed.
 625       echo "    cd $d && \$(MAKE) check && \$(MAKE) dist" ;;
 626     *)
 627       echo "    cd $d && \$(MAKE) $target" ;;
 628     esac
 629   done
 630   case $target in
 631     distclean|maintainer-clean) echo "  rm -f Makefile config.cache" ;;
 632   esac
 633 done >> Makefile.tmp
 634 cat <<EOF >> Makefile.tmp
 635
 636 recheck:
 637         \$(CONFIGURE_COMMAND)
 638
 639 Makefile: $srcdir/configure
 640         \$(CONFIGURE_COMMAND)
 641
 642 $srcdir/configure: \\
 643 END_OF_CONFIGURE
 644
 645 : > configure.tmp2
 646
 647 # We want to rerun bootstrap if a series file changes (patch added or removed)
 648 # or an existing patch changes.  Since we always have an series file (even if
 649 # it is empty), this also handles us adding the first patch for something.
 650 patches=
 651 for d in patches/* ; do
 652   series=$d/series
 653   echo "$series:" >> configure.tmp2
 654   cat << END
 655     $series\\\\
 656 END
 657   sed -n 's/[    ]*\(#.*\)\?$//;/./p' "$series" |\
 658       while read p ; do
 659     patch=$d/$p
 660     cat << END
 661     $patch\\\\
 662 END
 663     # Because there's a pipeline, this is a subshell, so use a temporary file
 664     # rather than a variable to compile a list of patches to use below.
 665     echo "$patch:" >> configure.tmp2
 666   done
 667 done >> configure.tmp
 668
 669 cat <<'END_OF_CONFIGURE' >> configure.tmp
 670     $srcdir/bootstrap
 671         $srcdir/bootstrap
 672
 673 .PHONY: $targets recheck
 674
 675 # Dummy dependencies to allow removing patches we no longer need.
 676 END_OF_CONFIGURE
 677
 678 cat configure.tmp2 >> configure.tmp
 679
 680 cat <<'END_OF_CONFIGURE' >> configure.tmp
 681 EOF
 682 mv -f Makefile.tmp Makefile
 683 trap - EXIT
 684 echo "Configured successfully - now run \"${MAKE-make}\""
 685 END_OF_CONFIGURE
 686
 687 rm -f configure.tmp2
 688
 689 chmod +x configure.tmp
 690 mv -f configure.tmp configure
 691
 692 trap - EXIT
 693 echo "Bootstrapped successfully - now run \"$srcdir/configure\" and \"${MAKE-make}\""