Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[wrt350n-kernel.git] / arch / arm / mach-at91 / gpio.c
blob4b47736a5e56ab8622eaf4329903efde88190c48
1 /*
2 * linux/arch/arm/mach-at91/gpio.c
4 * Copyright (C) 2005 HP Labs
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/clk.h>
13 #include <linux/errno.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/debugfs.h>
17 #include <linux/seq_file.h>
18 #include <linux/kernel.h>
19 #include <linux/list.h>
20 #include <linux/module.h>
22 #include <asm/io.h>
23 #include <asm/hardware.h>
24 #include <asm/arch/at91_pio.h>
25 #include <asm/arch/gpio.h>
27 #include "generic.h"
30 static struct at91_gpio_bank *gpio;
31 static int gpio_banks;
34 static inline void __iomem *pin_to_controller(unsigned pin)
36 pin -= PIN_BASE;
37 pin /= 32;
38 if (likely(pin < gpio_banks))
39 return gpio[pin].regbase;
41 return NULL;
44 static inline unsigned pin_to_mask(unsigned pin)
46 pin -= PIN_BASE;
47 return 1 << (pin % 32);
51 /*--------------------------------------------------------------------------*/
53 /* Not all hardware capabilities are exposed through these calls; they
54 * only encapsulate the most common features and modes. (So if you
55 * want to change signals in groups, do it directly.)
57 * Bootloaders will usually handle some of the pin multiplexing setup.
58 * The intent is certainly that by the time Linux is fully booted, all
59 * pins should have been fully initialized. These setup calls should
60 * only be used by board setup routines, or possibly in driver probe().
62 * For bootloaders doing all that setup, these calls could be inlined
63 * as NOPs so Linux won't duplicate any setup code
68 * mux the pin to the "GPIO" peripheral role.
70 int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup)
72 void __iomem *pio = pin_to_controller(pin);
73 unsigned mask = pin_to_mask(pin);
75 if (!pio)
76 return -EINVAL;
77 __raw_writel(mask, pio + PIO_IDR);
78 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
79 __raw_writel(mask, pio + PIO_PER);
80 return 0;
82 EXPORT_SYMBOL(at91_set_GPIO_periph);
86 * mux the pin to the "A" internal peripheral role.
88 int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
90 void __iomem *pio = pin_to_controller(pin);
91 unsigned mask = pin_to_mask(pin);
93 if (!pio)
94 return -EINVAL;
96 __raw_writel(mask, pio + PIO_IDR);
97 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
98 __raw_writel(mask, pio + PIO_ASR);
99 __raw_writel(mask, pio + PIO_PDR);
100 return 0;
102 EXPORT_SYMBOL(at91_set_A_periph);
106 * mux the pin to the "B" internal peripheral role.
108 int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
110 void __iomem *pio = pin_to_controller(pin);
111 unsigned mask = pin_to_mask(pin);
113 if (!pio)
114 return -EINVAL;
116 __raw_writel(mask, pio + PIO_IDR);
117 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
118 __raw_writel(mask, pio + PIO_BSR);
119 __raw_writel(mask, pio + PIO_PDR);
120 return 0;
122 EXPORT_SYMBOL(at91_set_B_periph);
126 * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
127 * configure it for an input.
129 int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
131 void __iomem *pio = pin_to_controller(pin);
132 unsigned mask = pin_to_mask(pin);
134 if (!pio)
135 return -EINVAL;
137 __raw_writel(mask, pio + PIO_IDR);
138 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
139 __raw_writel(mask, pio + PIO_ODR);
140 __raw_writel(mask, pio + PIO_PER);
141 return 0;
143 EXPORT_SYMBOL(at91_set_gpio_input);
147 * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
148 * and configure it for an output.
150 int __init_or_module at91_set_gpio_output(unsigned pin, int value)
152 void __iomem *pio = pin_to_controller(pin);
153 unsigned mask = pin_to_mask(pin);
155 if (!pio)
156 return -EINVAL;
158 __raw_writel(mask, pio + PIO_IDR);
159 __raw_writel(mask, pio + PIO_PUDR);
160 __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
161 __raw_writel(mask, pio + PIO_OER);
162 __raw_writel(mask, pio + PIO_PER);
163 return 0;
165 EXPORT_SYMBOL(at91_set_gpio_output);
169 * enable/disable the glitch filter; mostly used with IRQ handling.
171 int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
173 void __iomem *pio = pin_to_controller(pin);
174 unsigned mask = pin_to_mask(pin);
176 if (!pio)
177 return -EINVAL;
178 __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
179 return 0;
181 EXPORT_SYMBOL(at91_set_deglitch);
184 * enable/disable the multi-driver; This is only valid for output and
185 * allows the output pin to run as an open collector output.
187 int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
189 void __iomem *pio = pin_to_controller(pin);
190 unsigned mask = pin_to_mask(pin);
192 if (!pio)
193 return -EINVAL;
195 __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
196 return 0;
198 EXPORT_SYMBOL(at91_set_multi_drive);
200 /*--------------------------------------------------------------------------*/
202 /* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
203 * called, and maybe at91_set_multi_drive() for putout pins.
206 int gpio_direction_input(unsigned pin)
208 void __iomem *pio = pin_to_controller(pin);
209 unsigned mask = pin_to_mask(pin);
211 if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
212 return -EINVAL;
213 __raw_writel(mask, pio + PIO_ODR);
214 return 0;
216 EXPORT_SYMBOL(gpio_direction_input);
218 int gpio_direction_output(unsigned pin, int value)
220 void __iomem *pio = pin_to_controller(pin);
221 unsigned mask = pin_to_mask(pin);
223 if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
224 return -EINVAL;
225 __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
226 __raw_writel(mask, pio + PIO_OER);
227 return 0;
229 EXPORT_SYMBOL(gpio_direction_output);
231 /*--------------------------------------------------------------------------*/
234 * assuming the pin is muxed as a gpio output, set its value.
236 int at91_set_gpio_value(unsigned pin, int value)
238 void __iomem *pio = pin_to_controller(pin);
239 unsigned mask = pin_to_mask(pin);
241 if (!pio)
242 return -EINVAL;
243 __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
244 return 0;
246 EXPORT_SYMBOL(at91_set_gpio_value);
250 * read the pin's value (works even if it's not muxed as a gpio).
252 int at91_get_gpio_value(unsigned pin)
254 void __iomem *pio = pin_to_controller(pin);
255 unsigned mask = pin_to_mask(pin);
256 u32 pdsr;
258 if (!pio)
259 return -EINVAL;
260 pdsr = __raw_readl(pio + PIO_PDSR);
261 return (pdsr & mask) != 0;
263 EXPORT_SYMBOL(at91_get_gpio_value);
265 /*--------------------------------------------------------------------------*/
267 #ifdef CONFIG_PM
269 static u32 wakeups[MAX_GPIO_BANKS];
270 static u32 backups[MAX_GPIO_BANKS];
272 static int gpio_irq_set_wake(unsigned pin, unsigned state)
274 unsigned mask = pin_to_mask(pin);
275 unsigned bank = (pin - PIN_BASE) / 32;
277 if (unlikely(bank >= MAX_GPIO_BANKS))
278 return -EINVAL;
280 if (state)
281 wakeups[bank] |= mask;
282 else
283 wakeups[bank] &= ~mask;
285 set_irq_wake(gpio[bank].id, state);
287 return 0;
290 void at91_gpio_suspend(void)
292 int i;
294 for (i = 0; i < gpio_banks; i++) {
295 void __iomem *pio = gpio[i].regbase;
297 backups[i] = __raw_readl(pio + PIO_IMR);
298 __raw_writel(backups[i], pio + PIO_IDR);
299 __raw_writel(wakeups[i], pio + PIO_IER);
301 if (!wakeups[i])
302 clk_disable(gpio[i].clock);
303 else {
304 #ifdef CONFIG_PM_DEBUG
305 printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
306 #endif
311 void at91_gpio_resume(void)
313 int i;
315 for (i = 0; i < gpio_banks; i++) {
316 void __iomem *pio = gpio[i].regbase;
318 if (!wakeups[i])
319 clk_enable(gpio[i].clock);
321 __raw_writel(wakeups[i], pio + PIO_IDR);
322 __raw_writel(backups[i], pio + PIO_IER);
326 #else
327 #define gpio_irq_set_wake NULL
328 #endif
331 /* Several AIC controller irqs are dispatched through this GPIO handler.
332 * To use any AT91_PIN_* as an externally triggered IRQ, first call
333 * at91_set_gpio_input() then maybe enable its glitch filter.
334 * Then just request_irq() with the pin ID; it works like any ARM IRQ
335 * handler, though it always triggers on rising and falling edges.
337 * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
338 * configuring them with at91_set_a_periph() or at91_set_b_periph().
339 * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
342 static void gpio_irq_mask(unsigned pin)
344 void __iomem *pio = pin_to_controller(pin);
345 unsigned mask = pin_to_mask(pin);
347 if (pio)
348 __raw_writel(mask, pio + PIO_IDR);
351 static void gpio_irq_unmask(unsigned pin)
353 void __iomem *pio = pin_to_controller(pin);
354 unsigned mask = pin_to_mask(pin);
356 if (pio)
357 __raw_writel(mask, pio + PIO_IER);
360 static int gpio_irq_type(unsigned pin, unsigned type)
362 switch (type) {
363 case IRQ_TYPE_NONE:
364 case IRQ_TYPE_EDGE_BOTH:
365 return 0;
366 default:
367 return -EINVAL;
371 static struct irq_chip gpio_irqchip = {
372 .name = "GPIO",
373 .mask = gpio_irq_mask,
374 .unmask = gpio_irq_unmask,
375 .set_type = gpio_irq_type,
376 .set_wake = gpio_irq_set_wake,
379 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
381 unsigned pin;
382 struct irq_desc *gpio;
383 struct at91_gpio_bank *bank;
384 void __iomem *pio;
385 u32 isr;
387 bank = get_irq_chip_data(irq);
388 pio = bank->regbase;
390 /* temporarily mask (level sensitive) parent IRQ */
391 desc->chip->ack(irq);
392 for (;;) {
393 /* Reading ISR acks pending (edge triggered) GPIO interrupts.
394 * When there none are pending, we're finished unless we need
395 * to process multiple banks (like ID_PIOCDE on sam9263).
397 isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
398 if (!isr) {
399 if (!bank->next)
400 break;
401 bank = bank->next;
402 pio = bank->regbase;
403 continue;
406 pin = bank->chipbase;
407 gpio = &irq_desc[pin];
409 while (isr) {
410 if (isr & 1) {
411 if (unlikely(gpio->depth)) {
413 * The core ARM interrupt handler lazily disables IRQs so
414 * another IRQ must be generated before it actually gets
415 * here to be disabled on the GPIO controller.
417 gpio_irq_mask(pin);
419 else
420 desc_handle_irq(pin, gpio);
422 pin++;
423 gpio++;
424 isr >>= 1;
427 desc->chip->unmask(irq);
428 /* now it may re-trigger */
431 /*--------------------------------------------------------------------------*/
433 #ifdef CONFIG_DEBUG_FS
435 static int at91_gpio_show(struct seq_file *s, void *unused)
437 int bank, j;
439 /* print heading */
440 seq_printf(s, "Pin\t");
441 for (bank = 0; bank < gpio_banks; bank++) {
442 seq_printf(s, "PIO%c\t", 'A' + bank);
444 seq_printf(s, "\n\n");
446 /* print pin status */
447 for (j = 0; j < 32; j++) {
448 seq_printf(s, "%i:\t", j);
450 for (bank = 0; bank < gpio_banks; bank++) {
451 unsigned pin = PIN_BASE + (32 * bank) + j;
452 void __iomem *pio = pin_to_controller(pin);
453 unsigned mask = pin_to_mask(pin);
455 if (__raw_readl(pio + PIO_PSR) & mask)
456 seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
457 else
458 seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
460 seq_printf(s, "\t");
463 seq_printf(s, "\n");
466 return 0;
469 static int at91_gpio_open(struct inode *inode, struct file *file)
471 return single_open(file, at91_gpio_show, NULL);
474 static const struct file_operations at91_gpio_operations = {
475 .open = at91_gpio_open,
476 .read = seq_read,
477 .llseek = seq_lseek,
478 .release = single_release,
481 static int __init at91_gpio_debugfs_init(void)
483 /* /sys/kernel/debug/at91_gpio */
484 (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
485 return 0;
487 postcore_initcall(at91_gpio_debugfs_init);
489 #endif
491 /*--------------------------------------------------------------------------*/
493 <<<<<<< HEAD:arch/arm/mach-at91/gpio.c
494 =======
495 /* This lock class tells lockdep that GPIO irqs are in a different
496 * category than their parents, so it won't report false recursion.
498 static struct lock_class_key gpio_lock_class;
500 >>>>>>> 264e3e889d86e552b4191d69bb60f4f3b383135a:arch/arm/mach-at91/gpio.c
502 * Called from the processor-specific init to enable GPIO interrupt support.
504 void __init at91_gpio_irq_setup(void)
506 unsigned pioc, pin;
507 struct at91_gpio_bank *this, *prev;
509 for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
510 pioc++ < gpio_banks;
511 prev = this, this++) {
512 unsigned id = this->id;
513 unsigned i;
515 /* enable PIO controller's clock */
516 clk_enable(this->clock);
518 __raw_writel(~0, this->regbase + PIO_IDR);
520 for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
521 <<<<<<< HEAD:arch/arm/mach-at91/gpio.c
522 =======
523 lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
525 >>>>>>> 264e3e889d86e552b4191d69bb60f4f3b383135a:arch/arm/mach-at91/gpio.c
527 * Can use the "simple" and not "edge" handler since it's
528 * shorter, and the AIC handles interrupts sanely.
530 set_irq_chip(pin, &gpio_irqchip);
531 set_irq_handler(pin, handle_simple_irq);
532 set_irq_flags(pin, IRQF_VALID);
535 /* The toplevel handler handles one bank of GPIOs, except
536 * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
537 * the list, so we only set up that handler.
539 if (prev && prev->next == this)
540 continue;
542 set_irq_chip_data(id, this);
543 set_irq_chained_handler(id, gpio_irq_handler);
545 pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
549 * Called from the processor-specific init to enable GPIO pin support.
551 void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
553 unsigned i;
554 struct at91_gpio_bank *last;
556 BUG_ON(nr_banks > MAX_GPIO_BANKS);
558 gpio = data;
559 gpio_banks = nr_banks;
561 for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
562 data->chipbase = PIN_BASE + i * 32;
563 data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
565 /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
566 if (last && last->id == data->id)
567 last->next = data;