| blob | fe4661db3bad068d4f7bb67aa3dc6e38f2cd3062 |
1 &time_control
2 run_days = 0,
3 run_hours = 0,
4 run_minutes = 60,
5 run_seconds = 0,
6 start_year = 0001, 0001, 0001,
7 start_month = 01, 01, 01,
8 start_day = 01, 01, 01,
9 start_hour = 00, 00, 00,
10 start_minute = 00, 00, 00,
11 start_second = 00, 00, 00,
12 end_year = 0001, 0001, 0001,
13 end_month = 01, 01, 01,
14 end_day = 01, 01, 01,
15 end_hour = 00, 00, 00,
16 end_minute = 60, 00, 00,
17 end_second = 00, 00, 00,
18 history_interval_s = 120, 120, 120,
19 frames_per_outfile = 1, 1, 1,
20 restart = .false.,
21 io_form_history = 2
22 io_form_restart = 2
23 io_form_input = 2
24 io_form_boundary = 2
25 debug_level = 1
26 /
28 &domains
29 time_step = 0,
30 time_step_fract_num = 1,
31 time_step_fract_den = 2,
32 max_dom = 1,
33 s_we = 1, 1, 1,
34 e_we = 103, 43, 43,
35 s_sn = 1, 1, 1,
36 e_sn = 103, 43, 43,
37 s_vert = 1, 1, 1,
38 e_vert = 51, 41, 41,
39 dx = 50, 30, 10,
40 dy = 50, 30, 10,
41 ztop = 4000, 1500, 1500,
42 grid_id = 1, 2, 3,
43 parent_id = 0, 1, 2,
44 i_parent_start = 0, 1, 1,
45 j_parent_start = 0, 1, 1,
46 parent_grid_ratio = 1, 2, 3,
47 parent_time_step_ratio = 1, 2, 3,
48 feedback = 1,
49 smooth_option = 0
50 sr_x = 4, 0, 0
51 sr_y = 4, 0, 0
52 /
54 &physics
55 mp_physics = 0, 0, 0,
56 ra_lw_physics = 0, 0, 0,
57 ra_sw_physics = 0, 0, 0,
58 radt = 30, 30, 30,
59 sf_sfclay_physics = 0, 0, 0,
60 sf_surface_physics = 0, 0, 0,
61 bl_pbl_physics = 0, 0, 0,
62 bldt = 0, 0, 0,
63 cu_physics = 0, 0, 0,
64 cudt = 0, 0, 0,
65 isfflx = 1,
66 ifsnow = 0,
67 icloud = 0,
68 num_soil_layers = 5,
69 mp_zero_out = 0,
70 /
72 &fdda
73 /
75 &dynamics
76 rk_ord = 3,
77 diff_opt = 2,
78 km_opt = 2,
79 damp_opt = 0,
80 zdamp = 800., 5000., 5000.,
81 dampcoef = 0.2, 0.2, 0.2
82 khdif = 0.05, 0.05, 0.05,
83 kvdif = 0.05, 0.05, 0.05,
84 smdiv = 0.1, 0.1, 0.1,
85 emdiv = 0.01, 0.01, 0.01,
86 epssm = 0.1, 0.1, 0.1
87 mix_full_fields = .true., .true., .true.,
88 non_hydrostatic = .true., .true., .true.,
89 h_mom_adv_order = 5, 5, 5,
90 v_mom_adv_order = 3, 3, 3,
91 h_sca_adv_order = 5, 5, 5,
92 v_sca_adv_order = 3, 3, 3,
93 time_step_sound = 20, 20, 20,
94 moist_adv_opt = 1, 1, 1,
95 scalar_adv_opt = 1, 1, 1,
96 /
98 &bdy_control
99 periodic_x = .false.,.false.,.false.,
100 symmetric_xs = .false.,.false.,.false.,
101 symmetric_xe = .false.,.false.,.false.,
102 open_xs = .true., .false.,.false.,
103 open_xe = .true., .false.,.false.,
104 periodic_y = .false.,.false.,.false.,
105 symmetric_ys = .false.,.false.,.false.,
106 symmetric_ye = .false.,.false.,.false.,
107 open_ys = .true., .false.,.false.,
108 open_ye = .true., .false.,.false.,
109 nested = .false., .true., .true.,
110 /
112 &grib2
113 /
115 &namelist_quilt
116 nio_tasks_per_group = 0,
117 nio_groups = 1,
118 /
120 &fire ! be sure to set sr_x,sr_y in domains-namelist (to set refinement in x,y)
121 ifire = 2, ! integer, = 0: no fire, 2=turn on fire model
122 fire_fuel_read = 0, ! integer, -1: from WPS, 0= use fire_fuel_cat, 1= by altitude
123 fire_fuel_cat = 1, ! integer, if specified which fuel category?
124 ! ignition
125 fire_num_ignitions = 1, ! integer, only the first fire_num_ignition used, up to 5 allowed
126 fire_ignition_ros1 = 0.05, ! rate of spread during ignition, m/s
127 fire_ignition_start_x1 = 2000., ! start points of ignition lines, in m from lower left corner
128 fire_ignition_start_y1 = 2000., ! start points of ignition lines, in m from lower left corner
129 fire_ignition_end_x1 = 2000., ! end points of ignition lines, in m from lower left corner
130 fire_ignition_end_y1 = 3000., ! end points of ignition lines, in m from lower left corner
131 fire_ignition_radius1 = 80., ! all within this radius will ignite, > fire mesh step
132 fire_ignition_start_time1 = 120., ! sec for ignition from the start
133 fire_ignition_end_time1 =145., ! sec for ignition from the start
134 fire_ignition_ros2 = 0.05, ! rate of spread during ignition, m/s
135 fire_ignition_start_x2 = 2000., ! start points of ignition lines, in m from lower left corner
136 fire_ignition_start_y2 = 500., ! start points of ignition lines, in m from lower left corner
137 fire_ignition_end_x2 = 2000., ! end points of ignition lines, in m from lower left corner
138 fire_ignition_end_y2 = 1900., ! end points of ignition lines, in m from lower left corner
139 fire_ignition_radius2 = 18., ! all within this radius will ignite, > fire mesh step
140 fire_ignition_start_time2 = 3., ! sec for ignition from the start ! end ignition for sfire
141 fire_ignition_end_time2 =503., ! sec for ignition from the start! end ignition for sfire
142 fire_wind_height = 1., ! height to interpolate winds to for calculating fire spread rate
143 !
144 ! verbosity
145 fire_print_msg = 1, ! 1 print fire debugging messages
146 fire_print_file = 0, ! 1 write files for matlab
147 !
148 ! experiments
149 !
150 ! fire_const_time = -1., ! (s) if >0, time from start to stop fire evolution and keep heat output constant
151 ! fire_const_grnhfx = -1, ! (W/s) if both >=0, use this flux (meant to be used when fire_const_time=ignition time)
152 ! fire_const_grnqfx = -1, ! (W/s) if both >=0, use this flux (meant to be used when fire_const_time=ignition time)
153 ! fire_test_steps=0, ! >0 = on first call, do specified number of steps and terminate (testing only)
154 fire_mountain_type=1, ! in ideal: 0=none, 1= hill, 2=EW ridge, 3=NS ridge
155 fire_mountain_height=100., ! (m) ideal mountain height
156 fire_mountain_start_x=1750., ! (m) coord of start of the mountain from lower left corner (just like ignition)
157 fire_mountain_start_y=1750., ! (m) coord of start of the mountain from lower left corner (just like ignition)
158 fire_mountain_end_x=3250., ! (m) coord of end of the mountain from lower left corner (just like ignition)
159 fire_mountain_end_y=3250., ! (m) coord of end of the mountain from lower left corner (just like ignition)
160 fire_topo_from_atm=1, ! 0 = fire mesh topo set from fine-res data, 1 = populate by interpolating from atmosphere
161 delt_perturbation = 0.0, ! Temperature perturbation for creating cold (negative) / warm (positive) bubble [K], 0 turns it off
162 !xrad_perturbation = 10000.0, ! Horizontal radius of the bubble in E-W direction [m]
163 !yrad_perturbation = 10000.0, ! Horizontal radius of the bubble in N-S direction [m]
164 !zrad_perturbation = 1500.0, ! Vertical radius of the bubble [m]
165 !hght_perturbation = 1500.0, ! Perturbation height - height at which the warm/cold bubble will be suspended [m]
166 !
167 ! method switches for developers only, do not change!
168 !
169 fire_boundary_guard = -1, ! integer, number of cells to stop when fire close to the domain boundary, -1 turn off
170 fire_fuel_left_irl=2, ! refinement to integrate fuel_left, must be even
171 fire_fuel_left_jrl=2, ! refinement to integrate fuel_left, must be even
172 fire_atm_feedback=1.0, ! real, multiplier for heat fluxes, 1.=normal, 0.=turn off two-way coupling
173 fire_back_weight=0.5, ! RK timestepping coefficient, 0=forward, 0.5=Heun
174 fire_grows_only=1, ! if >0 level set function cannot increase = fire can only grow
175 fire_viscosity=0.4, ! artificial viscosity in level set method (max 1, needed with fire_upwinding=0)
176 fire_upwinding=3, ! 0=none, 1=standard, 2=godunov, 3=eno, 4=sethian
177 fire_fuel_left_method=1, ! for now, use 1 only
178 fire_lfn_ext_up=1.0, ! 0.=extend level set function at boundary by reflection, 1.=always up
179 fire_advection=0, ! 0 = cawfe, 1 = use abs speed/slope in spread rate, then project on normal to fireline
180 /