debugger/break.c

   1 /*
   2  * Debugger break-points handling
   3  *
   4  * Copyright 1994 Martin von Loewis
   5  * Copyright 1995 Alexandre Julliard
   6  * Copyright 1999,2000 Eric Pouech
   7  */
   8
   9 #include "config.h"
  10 #include "debugger.h"
  11
  12 #ifdef __i386__
  13 #define DR7_CONTROL_SHIFT       16
  14 #define DR7_CONTROL_SIZE        4
  15
  16 #define DR7_RW_EXECUTE          (0x0)
  17 #define DR7_RW_WRITE            (0x1)
  18 #define DR7_RW_READ             (0x3)
  19
  20 #define DR7_LEN_1               (0x0)
  21 #define DR7_LEN_2               (0x4)
  22 #define DR7_LEN_4               (0xC)
  23
  24 #define DR7_LOCAL_ENABLE_SHIFT  0
  25 #define DR7_GLOBAL_ENABLE_SHIFT 1
  26 #define DR7_ENABLE_SIZE         2
  27
  28 #define DR7_LOCAL_ENABLE_MASK   (0x55)
  29 #define DR7_GLOBAL_ENABLE_MASK  (0xAA)
  30
  31 #define DR7_CONTROL_RESERVED    (0xFC00)
  32 #define DR7_LOCAL_SLOWDOWN      (0x100)
  33 #define DR7_GLOBAL_SLOWDOWN     (0x200)
  34
  35 #define DR7_ENABLE_MASK(dr)     (1<<(DR7_LOCAL_ENABLE_SHIFT+DR7_ENABLE_SIZE*(dr)))
  36 #define IS_DR7_SET(ctrl,dr)     ((ctrl)&DR7_ENABLE_MASK(dr))
  37 #define INT3          0xcc   /* int 3 opcode */
  38 #endif
  39
  40 #define MAX_BREAKPOINTS 100
  41
  42 static DBG_BREAKPOINT breakpoints[MAX_BREAKPOINTS];
  43
  44 static int next_bp = 1;  /* breakpoint 0 is reserved for step-over */
  45
  46 /***********************************************************************
  47  *           DEBUG_IsStepOverInstr
  48  *
  49  * Determine if the instruction at CS:EIP is an instruction that
  50  * we need to step over (like a call or a repetitive string move).
  51  */
  52 static BOOL DEBUG_IsStepOverInstr(void)
  53 {
  54 #ifdef __i386__
  55     BYTE*       instr;
  56     BYTE        ch;
  57     DBG_ADDR    addr;
  58
  59     addr.seg = DEBUG_context.SegCs;
  60     addr.off = DEBUG_context.Eip;
  61     /* FIXME: old code was using V86BASE(DEBUG_context)
  62      * instead of passing thru DOSMEM_MemoryBase
  63      */
  64     instr = (BYTE*)DEBUG_ToLinear(&addr);
  65
  66     for (;;)
  67     {
  68         if (!DEBUG_READ_MEM(instr, &ch, sizeof(ch)))
  69             return FALSE;
  70
  71         switch (ch)
  72         {
  73           /* Skip all prefixes */
  74
  75         case 0x2e:  /* cs: */
  76         case 0x36:  /* ss: */
  77         case 0x3e:  /* ds: */
  78         case 0x26:  /* es: */
  79         case 0x64:  /* fs: */
  80         case 0x65:  /* gs: */
  81         case 0x66:  /* opcode size prefix */
  82         case 0x67:  /* addr size prefix */
  83         case 0xf0:  /* lock */
  84         case 0xf2:  /* repne */
  85         case 0xf3:  /* repe */
  86             instr++;
  87             continue;
  88
  89           /* Handle call instructions */
  90
  91         case 0xcd:  /* int <intno> */
  92         case 0xe8:  /* call <offset> */
  93         case 0x9a:  /* lcall <seg>:<off> */
  94             return TRUE;
  95
  96         case 0xff:  /* call <regmodrm> */
  97             if (!DEBUG_READ_MEM(instr + 1, &ch, sizeof(ch)))
  98                 return FALSE;
  99             return (((ch & 0x38) == 0x10) || ((ch & 0x38) == 0x18));
 100
 101           /* Handle string instructions */
 102
 103         case 0x6c:  /* insb */
 104         case 0x6d:  /* insw */
 105         case 0x6e:  /* outsb */
 106         case 0x6f:  /* outsw */
 107         case 0xa4:  /* movsb */
 108         case 0xa5:  /* movsw */
 109         case 0xa6:  /* cmpsb */
 110         case 0xa7:  /* cmpsw */
 111         case 0xaa:  /* stosb */
 112         case 0xab:  /* stosw */
 113         case 0xac:  /* lodsb */
 114         case 0xad:  /* lodsw */
 115         case 0xae:  /* scasb */
 116         case 0xaf:  /* scasw */
 117             return TRUE;
 118
 119         default:
 120             return FALSE;
 121         }
 122     }
 123 #else
 124     return FALSE;
 125 #endif
 126 }
 127
 128
 129 /***********************************************************************
 130  *           DEBUG_IsFctReturn
 131  *
 132  * Determine if the instruction at CS:EIP is an instruction that
 133  * is a function return.
 134  */
 135 BOOL DEBUG_IsFctReturn(void)
 136 {
 137 #ifdef __i386__
 138     BYTE*       instr;
 139     BYTE        ch;
 140     DBG_ADDR    addr;
 141
 142     addr.seg = DEBUG_context.SegCs;
 143     addr.off = DEBUG_context.Eip;
 144     /* FIXME: old code was using V86BASE(DEBUG_context)
 145      * instead of passing thru DOSMEM_MemoryBase
 146      */
 147     instr = (BYTE*)DEBUG_ToLinear(&addr);
 148
 149     if (!DEBUG_READ_MEM(instr, &ch, sizeof(ch)))
 150         return FALSE;
 151
 152     return (ch == 0xc2) || (ch == 0xc3);
 153 #else
 154     return FALSE;
 155 #endif
 156 }
 157
 158
 159 /***********************************************************************
 160  *           DEBUG_SetBreakpoints
 161  *
 162  * Set or remove all the breakpoints.
 163  */
 164 void DEBUG_SetBreakpoints( BOOL set )
 165 {
 166    int          i;
 167
 168 #ifdef __i386__
 169    DEBUG_context.Dr7 &= ~DR7_LOCAL_ENABLE_MASK;
 170 #endif
 171
 172    for (i = 0; i < next_bp; i++)
 173    {
 174       if (!(breakpoints[i].refcount && breakpoints[i].enabled))
 175          continue;
 176
 177       switch (breakpoints[i].type) {
 178       case DBG_BREAK:
 179          {
 180 #ifdef __i386__
 181             char ch = set ? INT3 : breakpoints[i].u.b.opcode;
 182
 183             if (!DEBUG_WRITE_MEM( (void*)DEBUG_ToLinear(&breakpoints[i].addr),
 184                                   &ch, sizeof(ch) ))
 185             {
 186                DEBUG_Printf(DBG_CHN_MESG, "Invalid address for breakpoint %d, disabling it\n", i);
 187                breakpoints[i].enabled = FALSE;
 188             }
 189 #endif
 190          }
 191          break;
 192       case DBG_WATCH:
 193          if (set)
 194          {
 195 #ifdef __i386__
 196             DWORD       bits;
 197             int         reg = breakpoints[i].u.w.reg;
 198             LPDWORD     lpdr = NULL;
 199
 200             switch (reg)
 201             {
 202                case 0: lpdr = &DEBUG_context.Dr0; break;
 203                case 1: lpdr = &DEBUG_context.Dr1; break;
 204                case 2: lpdr = &DEBUG_context.Dr2; break;
 205                case 3: lpdr = &DEBUG_context.Dr3; break;
 206                default: RaiseException(DEBUG_STATUS_INTERNAL_ERROR, 0, 0, NULL);
 207             }
 208
 209             *lpdr = DEBUG_ToLinear(&breakpoints[i].addr);
 210             bits = (breakpoints[i].u.w.rw) ? DR7_RW_WRITE : DR7_RW_READ;
 211             switch (breakpoints[i].u.w.len + 1)
 212             {
 213                case 4: bits |= DR7_LEN_4;       break;
 214                case 2: bits |= DR7_LEN_2;       break;
 215                case 1: bits |= DR7_LEN_1;       break;
 216                default: RaiseException(DEBUG_STATUS_INTERNAL_ERROR, 0, 0, NULL);
 217             }
 218
 219             DEBUG_context.Dr7 &= ~(0x0F << (DR7_CONTROL_SHIFT + DR7_CONTROL_SIZE * reg));
 220             DEBUG_context.Dr7 |= bits << (DR7_CONTROL_SHIFT + DR7_CONTROL_SIZE * reg);
 221             DEBUG_context.Dr7 |= DR7_ENABLE_MASK(reg) | DR7_LOCAL_SLOWDOWN;
 222 #endif
 223          }
 224          break;
 225       }
 226    }
 227 }
 228
 229 /***********************************************************************
 230  *           DEBUG_FindBreakpoint
 231  *
 232  * Find the breakpoint for a given address. Return the breakpoint
 233  * number or -1 if none.
 234  * If type is DBG_BREAKPOINT, addr is a complete addr
 235  * If type is DBG_WATCHPOINT, only addr.off is meaningful and contains
 236  * linear address
 237  */
 238 static int DEBUG_FindBreakpoint( const DBG_ADDR *addr, int type )
 239 {
 240    int i;
 241
 242    for (i = 0; i < next_bp; i++)
 243    {
 244       if (breakpoints[i].refcount && breakpoints[i].enabled &&
 245           breakpoints[i].type == type )
 246       {
 247          if ((type == DBG_BREAK &&
 248               breakpoints[i].addr.seg == addr->seg &&
 249               breakpoints[i].addr.off == addr->off) ||
 250              (type == DBG_WATCH &&
 251               DEBUG_ToLinear(&breakpoints[i].addr) == addr->off))
 252             return i;
 253       }
 254    }
 255    return -1;
 256 }
 257
 258 /***********************************************************************
 259  *           DEBUG_InitXPoint
 260  *
 261  * Find an empty slot in BP table to add a new break/watch point
 262  */
 263 static  int     DEBUG_InitXPoint(int type, DBG_ADDR* addr)
 264 {
 265    int  num;
 266
 267    for (num = (next_bp < MAX_BREAKPOINTS) ? next_bp++ : 1;
 268         num < MAX_BREAKPOINTS; num++)
 269    {
 270       if (breakpoints[num].refcount == 0)
 271       {
 272           breakpoints[num].refcount = 1;
 273           breakpoints[num].enabled = TRUE;
 274           breakpoints[num].type    = type;
 275           breakpoints[num].skipcount = 0;
 276           breakpoints[num].addr = *addr;
 277           switch (DEBUG_GetSelectorType( addr->seg ))
 278           {
 279           case MODE_32:
 280               breakpoints[num].is32 = 1;
 281               break;
 282           case MODE_VM86:
 283           case MODE_16:
 284               breakpoints[num].is32 = 0;
 285               break;
 286           default:
 287               RaiseException(DEBUG_STATUS_INTERNAL_ERROR, 0, 0, NULL);
 288           }
 289           return num;
 290       }
 291    }
 292
 293    DEBUG_Printf( DBG_CHN_MESG, "Too many breakpoints. Please delete some.\n" );
 294    return -1;
 295 }
 296
 297 /***********************************************************************
 298  *           DEBUG_GetWatchedValue
 299  *
 300  * Returns the value watched by watch point 'num'.
 301  */
 302 static  BOOL    DEBUG_GetWatchedValue( int num, LPDWORD val )
 303 {
 304    BYTE         buf[4];
 305
 306    if (!DEBUG_READ_MEM((void*)DEBUG_ToLinear(&breakpoints[num].addr),
 307                        buf, breakpoints[num].u.w.len + 1))
 308       return FALSE;
 309
 310    switch (breakpoints[num].u.w.len + 1)
 311    {
 312       case 4:   *val = *(DWORD*)buf;    break;
 313       case 2:   *val = *(WORD*)buf;     break;
 314       case 1:   *val = *(BYTE*)buf;     break;
 315       default: RaiseException(DEBUG_STATUS_INTERNAL_ERROR, 0, 0, NULL);
 316    }
 317    return TRUE;
 318 }
 319
 320 /***********************************************************************
 321  *           DEBUG_AddBreakpoint
 322  *
 323  * Add a breakpoint.
 324  */
 325 void DEBUG_AddBreakpoint( const DBG_VALUE *_value, BOOL (*func)(void) )
 326 {
 327     DBG_VALUE value = *_value;
 328     int num;
 329     BYTE ch;
 330
 331     if( value.type != NULL && value.type == DEBUG_TypeIntConst )
 332     {
 333         /*
 334          * We know that we have the actual offset stored somewhere
 335          * else in 32-bit space.  Grab it, and we
 336          * should be all set.
 337          */
 338         unsigned int seg2 = value.addr.seg;
 339         value.addr.seg = 0;
 340         value.addr.off = DEBUG_GetExprValue(&value, NULL);
 341         value.addr.seg = seg2;
 342     }
 343
 344     if ((num = DEBUG_FindBreakpoint(&value.addr, DBG_BREAK)) >= 1)
 345     {
 346        breakpoints[num].refcount++;
 347        return;
 348     }
 349
 350     if (!DEBUG_READ_MEM_VERBOSE((void*)DEBUG_ToLinear( &value.addr ), &ch, sizeof(ch)))
 351     {
 352        DEBUG_Printf( DBG_CHN_MESG, "Invalid address, can't set breakpoint\n");
 353        return;
 354     }
 355
 356     if ((num = DEBUG_InitXPoint(DBG_BREAK, &value.addr)) == -1)
 357        return;
 358
 359     breakpoints[num].u.b.opcode = ch;
 360     breakpoints[num].u.b.func = func;
 361
 362     DEBUG_Printf( DBG_CHN_MESG, "Breakpoint %d at ", num );
 363     DEBUG_PrintAddress( &breakpoints[num].addr, breakpoints[num].is32 ? MODE_32 : MODE_16,
 364                         TRUE );
 365     DEBUG_Printf( DBG_CHN_MESG, "\n" );
 366 }
 367
 368 /***********************************************************************
 369  *           DEBUG_AddBreakpointFromId
 370  *
 371  * Add a breakpoint from a function name (and eventually a line #)
 372  */
 373 void    DEBUG_AddBreakpointFromId(const char *name, int lineno)
 374 {
 375    DBG_VALUE    value;
 376    int          i;
 377
 378    if (DEBUG_GetSymbolValue(name, lineno, &value, TRUE)) {
 379       DEBUG_AddBreakpoint(&value, NULL);
 380       return;
 381    }
 382
 383    DEBUG_Printf(DBG_CHN_MESG, "Unable to add breakpoint, will check again when a new DLL is loaded\n");
 384    for (i = 0; i < DEBUG_CurrProcess->num_delayed_bp; i++) {
 385       if (!strcmp(name, DEBUG_CurrProcess->delayed_bp[i].name) &&
 386           lineno == DEBUG_CurrProcess->delayed_bp[i].lineno) {
 387          return;
 388       }
 389    }
 390    DEBUG_CurrProcess->delayed_bp = DBG_realloc(DEBUG_CurrProcess->delayed_bp,
 391                                                sizeof(DBG_DELAYED_BP) * ++DEBUG_CurrProcess->num_delayed_bp);
 392
 393    DEBUG_CurrProcess->delayed_bp[DEBUG_CurrProcess->num_delayed_bp - 1].name = strcpy(DBG_alloc(strlen(name) + 1), name);
 394    DEBUG_CurrProcess->delayed_bp[DEBUG_CurrProcess->num_delayed_bp - 1].lineno = lineno;
 395 }
 396
 397 /***********************************************************************
 398  *           DEBUG_AddBreakpointFromLineno
 399  *
 400  * Add a breakpoint from a line number in current file
 401  */
 402 void    DEBUG_AddBreakpointFromLineno(int lineno)
 403 {
 404    DBG_VALUE                    value;
 405
 406    DEBUG_GetCurrentAddress(&value.addr);
 407
 408    if (lineno != -1) {
 409       struct name_hash* nh;
 410
 411       DEBUG_FindNearestSymbol(&value.addr, TRUE, &nh, 0, NULL);
 412       if (nh == NULL) {
 413          DEBUG_Printf(DBG_CHN_MESG, "Unable to add breakpoint\n");
 414          return;
 415       }
 416       DEBUG_GetLineNumberAddr(nh, lineno, &value.addr, TRUE);
 417    }
 418
 419    value.type = NULL;
 420    value.cookie = DV_TARGET;
 421    DEBUG_AddBreakpoint( &value, NULL );
 422 }
 423
 424 /***********************************************************************
 425  *           DEBUG_CheckDelayedBP
 426  *
 427  * Check is a registered delayed BP is now available.
 428  */
 429 void            DEBUG_CheckDelayedBP(void)
 430 {
 431    DBG_VALUE            value;
 432    int                  i = 0;
 433    DBG_DELAYED_BP*      dbp = DEBUG_CurrProcess->delayed_bp;
 434
 435    while (i < DEBUG_CurrProcess->num_delayed_bp) {
 436       if (DEBUG_GetSymbolValue(dbp[i].name, dbp[i].lineno, &value, TRUE)) {
 437          DEBUG_AddBreakpoint(&value, NULL);
 438          memmove(&dbp[i], &dbp[i+1], (--DEBUG_CurrProcess->num_delayed_bp - i) * sizeof(*dbp));
 439       } else {
 440          i++;
 441       }
 442    }
 443 }
 444
 445 /***********************************************************************
 446  *           DEBUG_AddWatchpoint
 447  *
 448  * Add a watchpoint.
 449  */
 450 void DEBUG_AddWatchpoint( const DBG_VALUE *_value, BOOL is_write )
 451 {
 452    DBG_VALUE    value = *_value;
 453    int          num, reg = -1;
 454    unsigned     seg2;
 455    DWORD        mask = 0;
 456
 457    assert(_value->cookie == DV_TARGET || _value->cookie == DV_HOST);
 458
 459 #ifdef __i386__
 460    DEBUG_FixAddress( &value.addr, DEBUG_context.SegCs );
 461 #endif
 462
 463    if ( value.type != NULL && value.type == DEBUG_TypeIntConst )
 464    {
 465       /*
 466        * We know that we have the actual offset stored somewhere
 467        * else in 32-bit space.  Grab it, and we
 468        * should be all set.
 469        */
 470       seg2 = value.addr.seg;
 471       value.addr.seg = 0;
 472       value.addr.off = DEBUG_GetExprValue(&value, NULL);
 473       value.addr.seg = seg2;
 474    }
 475
 476    for (num = 1; num < next_bp; num++)
 477    {
 478       if (breakpoints[num].refcount && breakpoints[num].enabled &&
 479           breakpoints[num].type == DBG_WATCH) {
 480          mask |= (1 << breakpoints[num].u.w.reg);
 481       }
 482    }
 483 #ifdef __i386__
 484    for (reg = 0; reg < 4 && (mask & (1 << reg)); reg++);
 485    if (reg == 4)
 486    {
 487       DEBUG_Printf(DBG_CHN_MESG, "All i386 hardware watchpoints have been set. Delete some\n");
 488       return;
 489    }
 490 #endif
 491
 492    if ((num = DEBUG_InitXPoint(DBG_WATCH, &value.addr)) == -1)
 493       return;
 494
 495    breakpoints[num].u.w.len = 4 - 1;
 496    if (_value->type && DEBUG_GetObjectSize(_value->type) < 4)
 497       breakpoints[num].u.w.len = 2 - 1;
 498
 499    if (!DEBUG_GetWatchedValue( num, &breakpoints[num].u.w.oldval))
 500    {
 501       DEBUG_Printf(DBG_CHN_MESG, "Bad address. Watchpoint not set\n");
 502       breakpoints[num].refcount = 0;
 503    }
 504    else
 505    {
 506       breakpoints[num].u.w.rw = (is_write) ? TRUE : FALSE;
 507       breakpoints[reg].u.w.reg = reg;
 508
 509       DEBUG_Printf( DBG_CHN_MESG, "Watchpoint %d at ", num );
 510       DEBUG_PrintAddress( &breakpoints[num].addr, breakpoints[num].is32 ? MODE_32 : MODE_16, TRUE );
 511       DEBUG_Printf( DBG_CHN_MESG, "\n" );
 512    }
 513 }
 514
 515 /***********************************************************************
 516  *           DEBUG_AddWathpointFromId
 517  *
 518  * Add a watchpoint from a symbol name (and eventually a line #)
 519  */
 520 void    DEBUG_AddWatchpointFromId(const char *name)
 521 {
 522    DBG_VALUE value;
 523
 524    if( DEBUG_GetSymbolValue(name, -1, &value, TRUE) )
 525       DEBUG_AddWatchpoint( &value, 1 );
 526    else
 527       DEBUG_Printf(DBG_CHN_MESG, "Unable to add watchpoint\n");
 528 }
 529
 530 /***********************************************************************
 531  *           DEBUG_DelBreakpoint
 532  *
 533  * Delete a breakpoint.
 534  */
 535 void DEBUG_DelBreakpoint( int num )
 536 {
 537     if ((num <= 0) || (num >= next_bp) || breakpoints[num].refcount == 0)
 538     {
 539         DEBUG_Printf( DBG_CHN_MESG, "Invalid breakpoint number %d\n", num );
 540         return;
 541     }
 542
 543     if (--breakpoints[num].refcount > 0)
 544        return;
 545
 546     if( breakpoints[num].condition != NULL )
 547     {
 548        DEBUG_FreeExpr(breakpoints[num].condition);
 549        breakpoints[num].condition = NULL;
 550     }
 551
 552     breakpoints[num].enabled = FALSE;
 553     breakpoints[num].refcount = 0;
 554     breakpoints[num].skipcount = 0;
 555 }
 556
 557 /***********************************************************************
 558  *           DEBUG_EnableBreakpoint
 559  *
 560  * Enable or disable a break point.
 561  */
 562 void DEBUG_EnableBreakpoint( int num, BOOL enable )
 563 {
 564     if ((num <= 0) || (num >= next_bp) || breakpoints[num].refcount == 0)
 565     {
 566         DEBUG_Printf( DBG_CHN_MESG, "Invalid breakpoint number %d\n", num );
 567         return;
 568     }
 569     breakpoints[num].enabled = (enable) ? TRUE : FALSE;
 570     breakpoints[num].skipcount = 0;
 571 }
 572
 573
 574 /***********************************************************************
 575  *           DEBUG_FindTriggeredWatchpoint
 576  *
 577  * Lookup the watchpoints to see if one has been triggered
 578  * Return >= (watch point index) if one is found and *oldval is set to
 579  *      the value watched before the TRAP
 580  * Return -1 if none found (*oldval is undetermined)
 581  *
 582  * Unfortunately, Linux does *NOT* (A REAL PITA) report with ptrace
 583  * the DR6 register value, so we have to look with our own need the
 584  * cause of the TRAP.
 585  * -EP
 586  */
 587 static int DEBUG_FindTriggeredWatchpoint(LPDWORD oldval)
 588 {
 589    int                          found = -1;
 590 #ifdef __i386__
 591    int                          i;
 592
 593    /* Method 1 => get triggered watchpoint from context (doesn't work on Linux
 594     * 2.2.x). This should be fixed in >= 2.2.16
 595     */
 596    for (i = 0; i < next_bp; i++)
 597    {
 598       DWORD val = 0;
 599
 600       if (breakpoints[i].refcount && breakpoints[i].enabled &&
 601           breakpoints[i].type == DBG_WATCH &&
 602           (DEBUG_context.Dr6 & (1 << breakpoints[i].u.w.reg)))
 603       {
 604          DEBUG_context.Dr6 &= ~(1 << breakpoints[i].u.w.reg);
 605
 606          *oldval = breakpoints[i].u.w.oldval;
 607          if (DEBUG_GetWatchedValue(i, &val)) {
 608             breakpoints[i].u.w.oldval = val;
 609             return i;
 610          }
 611       }
 612    }
 613
 614    /* Method 1 failed, trying method 2 */
 615
 616    /* Method 2 => check if value has changed among registered watchpoints
 617     * this really sucks, but this is how gdb 4.18 works on my linux box
 618     * -EP
 619     */
 620    for (i = 0; i < next_bp; i++)
 621    {
 622       DWORD val = 0;
 623
 624       if (breakpoints[i].refcount && breakpoints[i].enabled &&
 625           breakpoints[i].type == DBG_WATCH &&
 626           DEBUG_GetWatchedValue(i, &val))
 627       {
 628          *oldval = breakpoints[i].u.w.oldval;
 629          if (val != *oldval)
 630          {
 631             DEBUG_context.Dr6 &= ~(1 << breakpoints[i].u.w.reg);
 632             breakpoints[i].u.w.oldval = val;
 633             found = i;
 634             /* cannot break, because two watch points may have been triggered on
 635              * the same access
 636              * only one will be reported to the user (FIXME ?)
 637              */
 638          }
 639       }
 640    }
 641 #endif
 642    return found;
 643 }
 644
 645 /***********************************************************************
 646  *           DEBUG_InfoBreakpoints
 647  *
 648  * Display break points information.
 649  */
 650 void DEBUG_InfoBreakpoints(void)
 651 {
 652     int i;
 653
 654     DEBUG_Printf( DBG_CHN_MESG, "Breakpoints:\n" );
 655     for (i = 1; i < next_bp; i++)
 656     {
 657         if (breakpoints[i].refcount && breakpoints[i].type == DBG_BREAK)
 658         {
 659             DEBUG_Printf( DBG_CHN_MESG, "%d: %c ", i, breakpoints[i].enabled ? 'y' : 'n');
 660             DEBUG_PrintAddress( &breakpoints[i].addr,
 661                                 breakpoints[i].is32 ? MODE_32 : MODE_16, TRUE);
 662             DEBUG_Printf( DBG_CHN_MESG, " (%u)\n", breakpoints[i].refcount );
 663             if( breakpoints[i].condition != NULL )
 664             {
 665                 DEBUG_Printf(DBG_CHN_MESG, "\t\tstop when  ");
 666                 DEBUG_DisplayExpr(breakpoints[i].condition);
 667                 DEBUG_Printf(DBG_CHN_MESG, "\n");
 668             }
 669         }
 670     }
 671     DEBUG_Printf( DBG_CHN_MESG, "Watchpoints:\n" );
 672     for (i = 1; i < next_bp; i++)
 673     {
 674         if (breakpoints[i].refcount && breakpoints[i].type == DBG_WATCH)
 675         {
 676             DEBUG_Printf( DBG_CHN_MESG, "%d: %c ", i, breakpoints[i].enabled ? 'y' : 'n');
 677             DEBUG_PrintAddress( &breakpoints[i].addr,
 678                                 breakpoints[i].is32 ? MODE_32 : MODE_16, TRUE);
 679             DEBUG_Printf( DBG_CHN_MESG, " on %d byte%s (%c)\n",
 680                      breakpoints[i].u.w.len + 1,
 681                      breakpoints[i].u.w.len > 0 ? "s" : "",
 682                      breakpoints[i].u.w.rw ? 'W' : 'R');
 683             if( breakpoints[i].condition != NULL )
 684             {
 685                 DEBUG_Printf(DBG_CHN_MESG, "\t\tstop when  ");
 686                 DEBUG_DisplayExpr(breakpoints[i].condition);
 687                 DEBUG_Printf(DBG_CHN_MESG, "\n");
 688             }
 689         }
 690     }
 691 }
 692
 693 /***********************************************************************
 694  *           DEBUG_ShallBreak
 695  *
 696  * Check whether or not the condition (bp / skipcount) of a break/watch
 697  * point are met.
 698  */
 699 static  BOOL DEBUG_ShallBreak( int bpnum )
 700 {
 701     if ( breakpoints[bpnum].condition != NULL )
 702     {
 703         DBG_VALUE value = DEBUG_EvalExpr(breakpoints[bpnum].condition);
 704
 705         if ( value.type == NULL )
 706         {
 707             /*
 708              * Something wrong - unable to evaluate this expression.
 709              */
 710             DEBUG_Printf(DBG_CHN_MESG, "Unable to evaluate expression ");
 711             DEBUG_DisplayExpr(breakpoints[bpnum].condition);
 712             DEBUG_Printf(DBG_CHN_MESG, "\nTurning off condition\n");
 713             DEBUG_AddBPCondition(bpnum, NULL);
 714         }
 715         else if( !DEBUG_GetExprValue( &value, NULL) )
 716         {
 717             return FALSE;
 718         }
 719     }
 720
 721     if ( breakpoints[bpnum].skipcount > 0 && --breakpoints[bpnum].skipcount > 0 )
 722         return FALSE;
 723
 724    if ((breakpoints[bpnum].type == DBG_BREAK) && breakpoints[bpnum].u.b.func)
 725        return breakpoints[bpnum].u.b.func();
 726    return TRUE;
 727 }
 728
 729 /***********************************************************************
 730  *           DEBUG_ShouldContinue
 731  *
 732  * Determine if we should continue execution after a SIGTRAP signal when
 733  * executing in the given mode.
 734  */
 735 BOOL DEBUG_ShouldContinue( DBG_ADDR *addr, DWORD code, enum exec_mode mode, int * count )
 736 {
 737     int         bpnum;
 738     DWORD       oldval;
 739     int         wpnum;
 740     enum dbg_mode addr_mode;
 741     struct symbol_info syminfo;
 742
 743 #ifdef __i386__
 744     /* If not single-stepping, back up over the int3 instruction */
 745     if (code == EXCEPTION_BREAKPOINT)
 746     {
 747        DEBUG_context.Eip--;
 748        addr->off--;
 749     }
 750 #endif
 751
 752     bpnum = DEBUG_FindBreakpoint( addr, DBG_BREAK );
 753     breakpoints[0].enabled = FALSE;  /* disable the step-over breakpoint */
 754
 755     if ((bpnum != 0) && (bpnum != -1))
 756     {
 757         if (!DEBUG_ShallBreak(bpnum)) return TRUE;
 758
 759         DEBUG_Printf( DBG_CHN_MESG, "Stopped on breakpoint %d at ", bpnum );
 760         syminfo = DEBUG_PrintAddress( &breakpoints[bpnum].addr,
 761                                       breakpoints[bpnum].is32 ? MODE_32 : MODE_16, TRUE );
 762         DEBUG_Printf( DBG_CHN_MESG, "\n" );
 763
 764         if( syminfo.list.sourcefile != NULL )
 765             DEBUG_List(&syminfo.list, NULL, 0);
 766         return FALSE;
 767     }
 768
 769     wpnum = DEBUG_FindTriggeredWatchpoint(&oldval);
 770     if ((wpnum != 0) && (wpnum != -1))
 771     {
 772        /* If not single-stepping, do not back up over the int3 instruction */
 773        if (code == EXCEPTION_BREAKPOINT)
 774        {
 775 #ifdef __i386__
 776            DEBUG_context.Eip++;
 777            addr->off++;
 778 #endif
 779        }
 780        if (!DEBUG_ShallBreak(wpnum)) return TRUE;
 781
 782        addr_mode = DEBUG_GetSelectorType( addr->seg );
 783        DEBUG_Printf(DBG_CHN_MESG, "Stopped on watchpoint %d at ", wpnum);
 784        syminfo = DEBUG_PrintAddress( addr, addr_mode, TRUE );
 785
 786        DEBUG_Printf(DBG_CHN_MESG, " values: old=%lu new=%lu\n",
 787                oldval, breakpoints[wpnum].u.w.oldval);
 788        if (syminfo.list.sourcefile != NULL)
 789           DEBUG_List(&syminfo.list, NULL, 0);
 790        return FALSE;
 791     }
 792
 793     /*
 794      * If our mode indicates that we are stepping line numbers,
 795      * get the current function, and figure out if we are exactly
 796      * on a line number or not.
 797      */
 798     if( mode == EXEC_STEP_OVER || mode == EXEC_STEP_INSTR )
 799     {
 800         if( DEBUG_CheckLinenoStatus(addr) == AT_LINENUMBER )
 801         {
 802             (*count)--;
 803         }
 804     }
 805     else if( mode == EXEC_STEPI_OVER || mode == EXEC_STEPI_INSTR )
 806     {
 807         (*count)--;
 808     }
 809
 810     if( *count > 0 || mode == EXEC_FINISH )
 811     {
 812         /*
 813          * We still need to execute more instructions.
 814          */
 815         return TRUE;
 816     }
 817
 818     /*
 819      * If we are about to stop, then print out the source line if we
 820      * have it.
 821      */
 822     if (mode != EXEC_CONT && mode != EXEC_PASS && mode != EXEC_FINISH)
 823     {
 824         DEBUG_FindNearestSymbol( addr, TRUE, NULL, 0, &syminfo.list);
 825         if( syminfo.list.sourcefile != NULL )
 826         {
 827             DEBUG_List(&syminfo.list, NULL, 0);
 828         }
 829     }
 830
 831 #ifdef __i386__
 832     /* If there's no breakpoint and we are not single-stepping, then we     */
 833     /* must have encountered an int3 in the Windows program; let's skip it. */
 834     if ((bpnum == -1) && code == EXCEPTION_BREAKPOINT)
 835     {
 836         DEBUG_context.Eip++;
 837         addr->off++;
 838     }
 839 #endif
 840
 841     /* no breakpoint, continue if in continuous mode */
 842     return (mode == EXEC_CONT || mode == EXEC_PASS || mode == EXEC_FINISH);
 843 }
 844
 845 /***********************************************************************
 846  *           DEBUG_SuspendExecution
 847  *
 848  * Remove all breakpoints before entering the debug loop
 849  */
 850 void    DEBUG_SuspendExecution( void )
 851 {
 852    DEBUG_SetBreakpoints( FALSE );
 853    breakpoints[0] = DEBUG_CurrThread->stepOverBP;
 854 }
 855
 856 /***********************************************************************
 857  *           DEBUG_RestartExecution
 858  *
 859  * Set the breakpoints to the correct state to restart execution
 860  * in the given mode.
 861  */
 862 enum exec_mode DEBUG_RestartExecution( enum exec_mode mode, int count )
 863 {
 864     DBG_ADDR addr;
 865     DBG_ADDR addr2;
 866     int bp;
 867     int delta;
 868     int status;
 869     enum exec_mode ret_mode;
 870     DWORD instr;
 871     unsigned char ch;
 872
 873     DEBUG_GetCurrentAddress( &addr );
 874
 875     /*
 876      * This is the mode we will be running in after we finish.  We would like
 877      * to be able to modify this in certain cases.
 878      */
 879     ret_mode = mode;
 880
 881     bp = DEBUG_FindBreakpoint( &addr, DBG_BREAK );
 882     if ( bp != -1 && bp != 0)
 883       {
 884         /*
 885          * If we have set a new value, then save it in the BP number.
 886          */
 887         if( count != 0 && mode == EXEC_CONT )
 888           {
 889             breakpoints[bp].skipcount = count;
 890           }
 891         mode = EXEC_STEPI_INSTR;  /* If there's a breakpoint, skip it */
 892       }
 893     else
 894       {
 895         if( mode == EXEC_CONT && count > 1 )
 896           {
 897             DEBUG_Printf(DBG_CHN_MESG, "Not stopped at any breakpoint; argument ignored.\n");
 898           }
 899       }
 900
 901     if( mode == EXEC_FINISH && DEBUG_IsFctReturn() )
 902       {
 903         mode = ret_mode = EXEC_STEPI_INSTR;
 904       }
 905
 906     instr = DEBUG_ToLinear( &addr );
 907     DEBUG_READ_MEM((void*)instr, &ch, sizeof(ch));
 908     /*
 909      * See if the function we are stepping into has debug info
 910      * and line numbers.  If not, then we step over it instead.
 911      * FIXME - we need to check for things like thunks or trampolines,
 912      * as the actual function may in fact have debug info.
 913      */
 914     if ( ch == 0xe8 )
 915       {
 916         DEBUG_READ_MEM((void*)(instr + 1), &delta, sizeof(delta));
 917         addr2 = addr;
 918         DEBUG_Disasm(&addr2, FALSE);
 919         addr2.off += delta;
 920
 921         status = DEBUG_CheckLinenoStatus(&addr2);
 922         /*
 923          * Anytime we have a trampoline, step over it.
 924          */
 925         if( ((mode == EXEC_STEP_OVER) || (mode == EXEC_STEPI_OVER))
 926             && status == FUNC_IS_TRAMPOLINE )
 927           {
 928 #if 0
 929             DEBUG_Printf(DBG_CHN_MESG, "Not stepping into trampoline at %x (no lines)\n",
 930                     addr2.off);
 931 #endif
 932             mode = EXEC_STEP_OVER_TRAMPOLINE;
 933           }
 934
 935         if( mode == EXEC_STEP_INSTR && status == FUNC_HAS_NO_LINES )
 936           {
 937 #if 0
 938             DEBUG_Printf(DBG_CHN_MESG, "Not stepping into function at %x (no lines)\n",
 939                     addr2.off);
 940 #endif
 941             mode = EXEC_STEP_OVER;
 942           }
 943       }
 944
 945
 946     if( mode == EXEC_STEP_INSTR )
 947       {
 948         if( DEBUG_CheckLinenoStatus(&addr) == FUNC_HAS_NO_LINES )
 949           {
 950             DEBUG_Printf(DBG_CHN_MESG, "Single stepping until exit from function, \n");
 951             DEBUG_Printf(DBG_CHN_MESG, "which has no line number information.\n");
 952
 953             ret_mode = mode = EXEC_FINISH;
 954           }
 955       }
 956
 957     switch(mode)
 958     {
 959     case EXEC_CONT: /* Continuous execution */
 960     case EXEC_PASS: /* Continue, passing exception */
 961 #ifdef __i386__
 962         DEBUG_context.EFlags &= ~STEP_FLAG;
 963 #endif
 964         DEBUG_SetBreakpoints( TRUE );
 965         break;
 966
 967     case EXEC_STEP_OVER_TRAMPOLINE:
 968       /*
 969        * This is the means by which we step over our conversion stubs
 970        * in callfrom*.s and callto*.s.  We dig the appropriate address
 971        * off the stack, and we set the breakpoint there instead of the
 972        * address just after the call.
 973        */
 974 #ifdef __i386__
 975       DEBUG_READ_MEM((void*)(DEBUG_context.Esp +
 976                              2 * sizeof(unsigned int)),
 977                      &addr.off, sizeof(addr.off));
 978       DEBUG_context.EFlags &= ~STEP_FLAG;
 979 #endif
 980       breakpoints[0].addr    = addr;
 981       breakpoints[0].enabled = TRUE;
 982       breakpoints[0].refcount = 1;
 983       breakpoints[0].skipcount = 0;
 984       DEBUG_READ_MEM((void*)DEBUG_ToLinear( &addr ), &breakpoints[0].u.b.opcode,
 985                      sizeof(char));
 986       DEBUG_SetBreakpoints( TRUE );
 987       break;
 988
 989     case EXEC_FINISH:
 990     case EXEC_STEPI_OVER:  /* Stepping over a call */
 991     case EXEC_STEP_OVER:  /* Stepping over a call */
 992         if (DEBUG_IsStepOverInstr())
 993         {
 994 #ifdef __i386__
 995             DEBUG_context.EFlags &= ~STEP_FLAG;
 996 #endif
 997             DEBUG_Disasm(&addr, FALSE);
 998             breakpoints[0].addr    = addr;
 999             breakpoints[0].enabled = TRUE;
1000             breakpoints[0].refcount = 1;
1001             breakpoints[0].skipcount = 0;
1002             DEBUG_READ_MEM((void*)DEBUG_ToLinear( &addr ), &breakpoints[0].u.b.opcode,
1003                            sizeof(char));
1004             DEBUG_SetBreakpoints( TRUE );
1005             break;
1006         }
1007         /* else fall through to single-stepping */
1008
1009     case EXEC_STEP_INSTR: /* Single-stepping an instruction */
1010     case EXEC_STEPI_INSTR: /* Single-stepping an instruction */
1011 #ifdef __i386__
1012         DEBUG_context.EFlags |= STEP_FLAG;
1013 #endif
1014         break;
1015     default:
1016         RaiseException(DEBUG_STATUS_INTERNAL_ERROR, 0, 0, NULL);
1017     }
1018     DEBUG_CurrThread->stepOverBP = breakpoints[0];
1019     return ret_mode;
1020 }
1021
1022 int
1023 DEBUG_AddBPCondition(int num, struct expr * exp)
1024 {
1025     if ((num <= 0) || (num >= next_bp) || !breakpoints[num].refcount)
1026     {
1027         DEBUG_Printf( DBG_CHN_MESG, "Invalid breakpoint number %d\n", num );
1028         return FALSE;
1029     }
1030
1031     if( breakpoints[num].condition != NULL )
1032       {
1033         DEBUG_FreeExpr(breakpoints[num].condition);
1034         breakpoints[num].condition = NULL;
1035       }
1036
1037     if( exp != NULL )
1038       {
1039         breakpoints[num].condition = DEBUG_CloneExpr(exp);
1040       }
1041
1042    return TRUE;
1043 }