2 * x86-64 signal handling routines
4 * Copyright 1999, 2005 Alexandre Julliard
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2.1 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
24 #include "wine/port.h"
35 #ifdef HAVE_SYS_PARAM_H
36 # include <sys/param.h>
38 #ifdef HAVE_SYS_SIGNAL_H
39 # include <sys/signal.h>
42 #define NONAMELESSUNION
45 #include "wine/library.h"
46 #include "wine/exception.h"
47 #include "ntdll_misc.h"
48 #include "wine/debug.h"
50 WINE_DEFAULT_DEBUG_CHANNEL(seh
);
53 /***********************************************************************
54 * signal context platform-specific definitions
58 typedef struct ucontext SIGCONTEXT
;
60 # define HANDLER_DEF(name) void name( int __signal, struct siginfo *__siginfo, SIGCONTEXT *__context )
61 # define HANDLER_CONTEXT (__context)
63 #define RAX_sig(context) ((context)->uc_mcontext.gregs[REG_RAX])
64 #define RBX_sig(context) ((context)->uc_mcontext.gregs[REG_RBX])
65 #define RCX_sig(context) ((context)->uc_mcontext.gregs[REG_RCX])
66 #define RDX_sig(context) ((context)->uc_mcontext.gregs[REG_RDX])
67 #define RSI_sig(context) ((context)->uc_mcontext.gregs[REG_RSI])
68 #define RDI_sig(context) ((context)->uc_mcontext.gregs[REG_RDI])
69 #define RBP_sig(context) ((context)->uc_mcontext.gregs[REG_RBP])
70 #define R8_sig(context) ((context)->uc_mcontext.gregs[REG_R8])
71 #define R9_sig(context) ((context)->uc_mcontext.gregs[REG_R9])
72 #define R10_sig(context) ((context)->uc_mcontext.gregs[REG_R10])
73 #define R11_sig(context) ((context)->uc_mcontext.gregs[REG_R11])
74 #define R12_sig(context) ((context)->uc_mcontext.gregs[REG_R12])
75 #define R13_sig(context) ((context)->uc_mcontext.gregs[REG_R13])
76 #define R14_sig(context) ((context)->uc_mcontext.gregs[REG_R14])
77 #define R15_sig(context) ((context)->uc_mcontext.gregs[REG_R15])
79 #define CS_sig(context) (*((WORD *)&(context)->uc_mcontext.gregs[REG_CSGSFS] + 0))
80 #define GS_sig(context) (*((WORD *)&(context)->uc_mcontext.gregs[REG_CSGSFS] + 1))
81 #define FS_sig(context) (*((WORD *)&(context)->uc_mcontext.gregs[REG_CSGSFS] + 2))
83 #define RSP_sig(context) ((context)->uc_mcontext.gregs[REG_RSP])
84 #define RIP_sig(context) ((context)->uc_mcontext.gregs[REG_RIP])
85 #define EFL_sig(context) ((context)->uc_mcontext.gregs[REG_EFL])
86 #define TRAP_sig(context) ((context)->uc_mcontext.gregs[REG_TRAPNO])
87 #define ERROR_sig(context) ((context)->uc_mcontext.gregs[REG_ERR])
89 #define FPU_sig(context) ((XMM_SAVE_AREA32 *)((context)->uc_mcontext.fpregs))
91 #define FAULT_CODE (__siginfo->si_code)
92 #define FAULT_ADDRESS (__siginfo->si_addr)
98 TRAP_x86_UNKNOWN
= -1, /* Unknown fault (TRAP_sig not defined) */
99 TRAP_x86_DIVIDE
= 0, /* Division by zero exception */
100 TRAP_x86_TRCTRAP
= 1, /* Single-step exception */
101 TRAP_x86_NMI
= 2, /* NMI interrupt */
102 TRAP_x86_BPTFLT
= 3, /* Breakpoint exception */
103 TRAP_x86_OFLOW
= 4, /* Overflow exception */
104 TRAP_x86_BOUND
= 5, /* Bound range exception */
105 TRAP_x86_PRIVINFLT
= 6, /* Invalid opcode exception */
106 TRAP_x86_DNA
= 7, /* Device not available exception */
107 TRAP_x86_DOUBLEFLT
= 8, /* Double fault exception */
108 TRAP_x86_FPOPFLT
= 9, /* Coprocessor segment overrun */
109 TRAP_x86_TSSFLT
= 10, /* Invalid TSS exception */
110 TRAP_x86_SEGNPFLT
= 11, /* Segment not present exception */
111 TRAP_x86_STKFLT
= 12, /* Stack fault */
112 TRAP_x86_PROTFLT
= 13, /* General protection fault */
113 TRAP_x86_PAGEFLT
= 14, /* Page fault */
114 TRAP_x86_ARITHTRAP
= 16, /* Floating point exception */
115 TRAP_x86_ALIGNFLT
= 17, /* Alignment check exception */
116 TRAP_x86_MCHK
= 18, /* Machine check exception */
117 TRAP_x86_CACHEFLT
= 19 /* Cache flush exception */
120 typedef int (*wine_signal_handler
)(unsigned int sig
);
122 static wine_signal_handler handlers
[256];
124 /***********************************************************************
127 static inline int dispatch_signal(unsigned int sig
)
129 if (handlers
[sig
] == NULL
) return 0;
130 return handlers
[sig
](sig
);
133 /***********************************************************************
136 * Set the register values from a sigcontext.
138 static void save_context( CONTEXT
*context
, const SIGCONTEXT
*sigcontext
)
140 context
->Rax
= RAX_sig(sigcontext
);
141 context
->Rcx
= RCX_sig(sigcontext
);
142 context
->Rdx
= RDX_sig(sigcontext
);
143 context
->Rbx
= RBX_sig(sigcontext
);
144 context
->Rsp
= RSP_sig(sigcontext
);
145 context
->Rbp
= RBP_sig(sigcontext
);
146 context
->Rsi
= RSI_sig(sigcontext
);
147 context
->Rdi
= RDI_sig(sigcontext
);
148 context
->R8
= R8_sig(sigcontext
);
149 context
->R9
= R9_sig(sigcontext
);
150 context
->R10
= R10_sig(sigcontext
);
151 context
->R11
= R11_sig(sigcontext
);
152 context
->R12
= R12_sig(sigcontext
);
153 context
->R13
= R13_sig(sigcontext
);
154 context
->R14
= R14_sig(sigcontext
);
155 context
->R15
= R15_sig(sigcontext
);
156 context
->Rip
= RIP_sig(sigcontext
);
157 context
->SegCs
= CS_sig(sigcontext
);
158 context
->SegFs
= FS_sig(sigcontext
);
159 context
->SegGs
= GS_sig(sigcontext
);
160 context
->EFlags
= EFL_sig(sigcontext
);
161 context
->SegDs
= 0; /* FIXME */
162 context
->SegEs
= 0; /* FIXME */
163 context
->SegSs
= 0; /* FIXME */
164 context
->MxCsr
= 0; /* FIXME */
165 if (FPU_sig(sigcontext
)) context
->u
.FltSave
= *FPU_sig(sigcontext
);
169 /***********************************************************************
172 * Build a sigcontext from the register values.
174 static void restore_context( const CONTEXT
*context
, SIGCONTEXT
*sigcontext
)
176 RAX_sig(sigcontext
) = context
->Rax
;
177 RCX_sig(sigcontext
) = context
->Rcx
;
178 RDX_sig(sigcontext
) = context
->Rdx
;
179 RBX_sig(sigcontext
) = context
->Rbx
;
180 RSP_sig(sigcontext
) = context
->Rsp
;
181 RBP_sig(sigcontext
) = context
->Rbp
;
182 RSI_sig(sigcontext
) = context
->Rsi
;
183 RDI_sig(sigcontext
) = context
->Rdi
;
184 R8_sig(sigcontext
) = context
->R8
;
185 R9_sig(sigcontext
) = context
->R9
;
186 R10_sig(sigcontext
) = context
->R10
;
187 R11_sig(sigcontext
) = context
->R11
;
188 R12_sig(sigcontext
) = context
->R12
;
189 R13_sig(sigcontext
) = context
->R13
;
190 R14_sig(sigcontext
) = context
->R14
;
191 R15_sig(sigcontext
) = context
->R15
;
192 RIP_sig(sigcontext
) = context
->Rip
;
193 CS_sig(sigcontext
) = context
->SegCs
;
194 FS_sig(sigcontext
) = context
->SegFs
;
195 GS_sig(sigcontext
) = context
->SegGs
;
196 EFL_sig(sigcontext
) = context
->EFlags
;
197 if (FPU_sig(sigcontext
)) *FPU_sig(sigcontext
) = context
->u
.FltSave
;
201 /***********************************************************************
204 * Get the context of the current thread.
206 void get_cpu_context( CONTEXT
*context
)
208 FIXME("not implemented\n");
212 /***********************************************************************
215 * Set the new CPU context.
217 void set_cpu_context( const CONTEXT
*context
)
219 FIXME("not implemented\n");
223 /**********************************************************************
226 * Handler for SIGSEGV and related errors.
228 static HANDLER_DEF(segv_handler
)
230 EXCEPTION_RECORD rec
;
233 save_context( &context
, HANDLER_CONTEXT
);
235 rec
.ExceptionRecord
= NULL
;
236 rec
.ExceptionFlags
= EXCEPTION_CONTINUABLE
;
237 rec
.ExceptionAddress
= (LPVOID
)context
.Rip
;
238 rec
.NumberParameters
= 0;
240 switch(TRAP_sig(HANDLER_CONTEXT
))
242 case TRAP_x86_OFLOW
: /* Overflow exception */
243 rec
.ExceptionCode
= EXCEPTION_INT_OVERFLOW
;
245 case TRAP_x86_BOUND
: /* Bound range exception */
246 rec
.ExceptionCode
= EXCEPTION_ARRAY_BOUNDS_EXCEEDED
;
248 case TRAP_x86_PRIVINFLT
: /* Invalid opcode exception */
249 rec
.ExceptionCode
= EXCEPTION_ILLEGAL_INSTRUCTION
;
251 case TRAP_x86_STKFLT
: /* Stack fault */
252 rec
.ExceptionCode
= EXCEPTION_STACK_OVERFLOW
;
254 case TRAP_x86_SEGNPFLT
: /* Segment not present exception */
255 case TRAP_x86_PROTFLT
: /* General protection fault */
256 case TRAP_x86_UNKNOWN
: /* Unknown fault code */
257 rec
.ExceptionCode
= ERROR_sig(HANDLER_CONTEXT
) ? EXCEPTION_ACCESS_VIOLATION
258 : EXCEPTION_PRIV_INSTRUCTION
;
260 case TRAP_x86_PAGEFLT
: /* Page fault */
261 rec
.ExceptionCode
= EXCEPTION_ACCESS_VIOLATION
;
263 rec
.NumberParameters
= 2;
264 rec
.ExceptionInformation
[0] = (ERROR_sig(HANDLER_CONTEXT
) & 2) != 0;
265 rec
.ExceptionInformation
[1] = (ULONG_PTR
)FAULT_ADDRESS
;
268 case TRAP_x86_ALIGNFLT
: /* Alignment check exception */
269 rec
.ExceptionCode
= EXCEPTION_DATATYPE_MISALIGNMENT
;
272 ERR( "Got unexpected trap %ld\n", TRAP_sig(HANDLER_CONTEXT
) );
274 case TRAP_x86_NMI
: /* NMI interrupt */
275 case TRAP_x86_DNA
: /* Device not available exception */
276 case TRAP_x86_DOUBLEFLT
: /* Double fault exception */
277 case TRAP_x86_TSSFLT
: /* Invalid TSS exception */
278 case TRAP_x86_MCHK
: /* Machine check exception */
279 case TRAP_x86_CACHEFLT
: /* Cache flush exception */
280 rec
.ExceptionCode
= EXCEPTION_ILLEGAL_INSTRUCTION
;
284 __regs_RtlRaiseException( &rec
, &context
);
285 restore_context( &context
, HANDLER_CONTEXT
);
288 /**********************************************************************
291 * Handler for SIGTRAP.
293 static HANDLER_DEF(trap_handler
)
295 EXCEPTION_RECORD rec
;
298 save_context( &context
, HANDLER_CONTEXT
);
299 rec
.ExceptionFlags
= EXCEPTION_CONTINUABLE
;
300 rec
.ExceptionRecord
= NULL
;
301 rec
.ExceptionAddress
= (LPVOID
)context
.Rip
;
302 rec
.NumberParameters
= 0;
306 case TRAP_TRACE
: /* Single-step exception */
307 rec
.ExceptionCode
= EXCEPTION_SINGLE_STEP
;
308 EFL_sig(HANDLER_CONTEXT
) &= ~0x100; /* clear single-step flag */
310 case TRAP_BRKPT
: /* Breakpoint exception */
311 rec
.ExceptionAddress
= (char *)rec
.ExceptionAddress
- 1; /* back up over the int3 instruction */
314 rec
.ExceptionCode
= EXCEPTION_BREAKPOINT
;
318 __regs_RtlRaiseException( &rec
, &context
);
319 restore_context( &context
, HANDLER_CONTEXT
);
322 /**********************************************************************
325 * Handler for SIGFPE.
327 static HANDLER_DEF(fpe_handler
)
329 EXCEPTION_RECORD rec
;
332 save_context( &context
, HANDLER_CONTEXT
);
333 rec
.ExceptionFlags
= EXCEPTION_CONTINUABLE
;
334 rec
.ExceptionRecord
= NULL
;
335 rec
.ExceptionAddress
= (LPVOID
)context
.Rip
;
336 rec
.NumberParameters
= 0;
341 rec
.ExceptionCode
= EXCEPTION_ARRAY_BOUNDS_EXCEEDED
;
344 rec
.ExceptionCode
= EXCEPTION_INT_DIVIDE_BY_ZERO
;
347 rec
.ExceptionCode
= EXCEPTION_INT_OVERFLOW
;
350 rec
.ExceptionCode
= EXCEPTION_FLT_DIVIDE_BY_ZERO
;
353 rec
.ExceptionCode
= EXCEPTION_FLT_OVERFLOW
;
356 rec
.ExceptionCode
= EXCEPTION_FLT_UNDERFLOW
;
359 rec
.ExceptionCode
= EXCEPTION_FLT_INEXACT_RESULT
;
363 rec
.ExceptionCode
= EXCEPTION_FLT_INVALID_OPERATION
;
367 __regs_RtlRaiseException( &rec
, &context
);
368 restore_context( &context
, HANDLER_CONTEXT
);
371 /**********************************************************************
374 * Handler for SIGINT.
376 static HANDLER_DEF(int_handler
)
378 if (!dispatch_signal(SIGINT
))
380 EXCEPTION_RECORD rec
;
383 save_context( &context
, HANDLER_CONTEXT
);
384 rec
.ExceptionCode
= CONTROL_C_EXIT
;
385 rec
.ExceptionFlags
= EXCEPTION_CONTINUABLE
;
386 rec
.ExceptionRecord
= NULL
;
387 rec
.ExceptionAddress
= (LPVOID
)context
.Rip
;
388 rec
.NumberParameters
= 0;
389 __regs_RtlRaiseException( &rec
, &context
);
390 restore_context( &context
, HANDLER_CONTEXT
);
395 /**********************************************************************
398 * Handler for SIGABRT.
400 static HANDLER_DEF(abrt_handler
)
402 EXCEPTION_RECORD rec
;
405 save_context( &context
, HANDLER_CONTEXT
);
406 rec
.ExceptionCode
= EXCEPTION_WINE_ASSERTION
;
407 rec
.ExceptionFlags
= EH_NONCONTINUABLE
;
408 rec
.ExceptionRecord
= NULL
;
409 rec
.ExceptionAddress
= (LPVOID
)context
.Rip
;
410 rec
.NumberParameters
= 0;
411 __regs_RtlRaiseException( &rec
, &context
); /* Should never return.. */
412 restore_context( &context
, HANDLER_CONTEXT
);
416 /**********************************************************************
419 * Handler for SIGQUIT.
421 static HANDLER_DEF(quit_handler
)
423 server_abort_thread(0);
427 /**********************************************************************
430 * Handler for SIGUSR1, used to signal a thread that it got suspended.
432 static HANDLER_DEF(usr1_handler
)
436 save_context( &context
, HANDLER_CONTEXT
);
437 wait_suspend( &context
);
438 restore_context( &context
, HANDLER_CONTEXT
);
442 /**********************************************************************
443 * get_signal_stack_total_size
445 * Retrieve the size to allocate for the signal stack, including the TEB at the bottom.
446 * Must be a power of two.
448 size_t get_signal_stack_total_size(void)
450 assert( sizeof(TEB
) <= 2*getpagesize() );
451 return 2*getpagesize(); /* this is just for the TEB, we don't need a signal stack */
455 /***********************************************************************
458 * Set a signal handler
460 static int set_handler( int sig
, void (*func
)() )
462 struct sigaction sig_act
;
464 sig_act
.sa_sigaction
= func
;
465 sig_act
.sa_mask
= server_block_set
;
466 sig_act
.sa_flags
= SA_RESTART
| SA_SIGINFO
| SA_ONSTACK
;
467 return sigaction( sig
, &sig_act
, NULL
);
471 /***********************************************************************
472 * __wine_set_signal_handler (NTDLL.@)
474 int __wine_set_signal_handler(unsigned int sig
, wine_signal_handler wsh
)
476 if (sig
> sizeof(handlers
) / sizeof(handlers
[0])) return -1;
477 if (handlers
[sig
] != NULL
) return -2;
483 /**********************************************************************
486 void signal_init_thread(void)
490 /**********************************************************************
491 * signal_init_process
493 void signal_init_process(void)
495 if (set_handler( SIGINT
, (void (*)())int_handler
) == -1) goto error
;
496 if (set_handler( SIGFPE
, (void (*)())fpe_handler
) == -1) goto error
;
497 if (set_handler( SIGSEGV
, (void (*)())segv_handler
) == -1) goto error
;
498 if (set_handler( SIGILL
, (void (*)())segv_handler
) == -1) goto error
;
499 if (set_handler( SIGABRT
, (void (*)())abrt_handler
) == -1) goto error
;
500 if (set_handler( SIGQUIT
, (void (*)())quit_handler
) == -1) goto error
;
501 if (set_handler( SIGUSR1
, (void (*)())usr1_handler
) == -1) goto error
;
503 if (set_handler( SIGBUS
, (void (*)())segv_handler
) == -1) goto error
;
506 if (set_handler( SIGTRAP
, (void (*)())trap_handler
) == -1) goto error
;
508 signal_init_thread();
517 /**********************************************************************
518 * __wine_enter_vm86 (NTDLL.@)
520 void __wine_enter_vm86( CONTEXT
*context
)
522 MESSAGE("vm86 mode not supported on this platform\n");
525 /**********************************************************************
526 * DbgBreakPoint (NTDLL.@)
528 __ASM_GLOBAL_FUNC( DbgBreakPoint
, "int $3; ret")
530 /**********************************************************************
531 * DbgUserBreakPoint (NTDLL.@)
533 __ASM_GLOBAL_FUNC( DbgUserBreakPoint
, "int $3; ret")
535 #endif /* __x86_64__ */