drivers/hwmon/adm1029.c

   1 /*
   2  * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
   3  *
   4  * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr>
   5  *
   6  * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org>
   7  *
   8  * Give only processor, motherboard temperatures and fan tachs
   9  * Very rare chip please let me know if you use it
  10  *
  11  * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
  12  *
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation version 2 of the License
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/hwmon-sysfs.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/err.h>
  36 #include <linux/mutex.h>
  37
  38 /*
  39  * Addresses to scan
  40  */
  41
  42 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  43                                                 0x2e, 0x2f, I2C_CLIENT_END
  44 };
  45
  46 /*
  47  * Insmod parameters
  48  */
  49
  50 I2C_CLIENT_INSMOD_1(adm1029);
  51
  52 /*
  53  * The ADM1029 registers
  54  * Manufacturer ID is 0x41 for Analog Devices
  55  */
  56
  57 #define ADM1029_REG_MAN_ID                      0x0D
  58 #define ADM1029_REG_CHIP_ID                     0x0E
  59 #define ADM1029_REG_CONFIG                      0x01
  60 #define ADM1029_REG_NB_FAN_SUPPORT              0x02
  61
  62 #define ADM1029_REG_TEMP_DEVICES_INSTALLED      0x06
  63
  64 #define ADM1029_REG_LOCAL_TEMP                  0xA0
  65 #define ADM1029_REG_REMOTE1_TEMP                0xA1
  66 #define ADM1029_REG_REMOTE2_TEMP                0xA2
  67
  68 #define ADM1029_REG_LOCAL_TEMP_HIGH             0x90
  69 #define ADM1029_REG_REMOTE1_TEMP_HIGH           0x91
  70 #define ADM1029_REG_REMOTE2_TEMP_HIGH           0x92
  71
  72 #define ADM1029_REG_LOCAL_TEMP_LOW              0x98
  73 #define ADM1029_REG_REMOTE1_TEMP_LOW            0x99
  74 #define ADM1029_REG_REMOTE2_TEMP_LOW            0x9A
  75
  76 #define ADM1029_REG_FAN1                        0x70
  77 #define ADM1029_REG_FAN2                        0x71
  78
  79 #define ADM1029_REG_FAN1_MIN                    0x78
  80 #define ADM1029_REG_FAN2_MIN                    0x79
  81
  82 #define ADM1029_REG_FAN1_CONFIG                 0x68
  83 #define ADM1029_REG_FAN2_CONFIG                 0x69
  84
  85 #define TEMP_FROM_REG(val)      ((val) * 1000)
  86
  87 #define DIV_FROM_REG(val)       ( 1 << (((val) >> 6) - 1))
  88
  89 /* Registers to be checked by adm1029_update_device() */
  90 static const u8 ADM1029_REG_TEMP[] = {
  91         ADM1029_REG_LOCAL_TEMP,
  92         ADM1029_REG_REMOTE1_TEMP,
  93         ADM1029_REG_REMOTE2_TEMP,
  94         ADM1029_REG_LOCAL_TEMP_HIGH,
  95         ADM1029_REG_REMOTE1_TEMP_HIGH,
  96         ADM1029_REG_REMOTE2_TEMP_HIGH,
  97         ADM1029_REG_LOCAL_TEMP_LOW,
  98         ADM1029_REG_REMOTE1_TEMP_LOW,
  99         ADM1029_REG_REMOTE2_TEMP_LOW,
 100 };
 101
 102 static const u8 ADM1029_REG_FAN[] = {
 103         ADM1029_REG_FAN1,
 104         ADM1029_REG_FAN2,
 105         ADM1029_REG_FAN1_MIN,
 106         ADM1029_REG_FAN2_MIN,
 107 };
 108
 109 static const u8 ADM1029_REG_FAN_DIV[] = {
 110         ADM1029_REG_FAN1_CONFIG,
 111         ADM1029_REG_FAN2_CONFIG,
 112 };
 113
 114 /*
 115  * Functions declaration
 116  */
 117
 118 static int adm1029_probe(struct i2c_client *client,
 119                          const struct i2c_device_id *id);
 120 static int adm1029_detect(struct i2c_client *client, int kind,
 121                           struct i2c_board_info *info);
 122 static int adm1029_remove(struct i2c_client *client);
 123 static struct adm1029_data *adm1029_update_device(struct device *dev);
 124 static int adm1029_init_client(struct i2c_client *client);
 125
 126 /*
 127  * Driver data (common to all clients)
 128  */
 129
 130 static const struct i2c_device_id adm1029_id[] = {
 131         { "adm1029", adm1029 },
 132         { }
 133 };
 134 MODULE_DEVICE_TABLE(i2c, adm1029_id);
 135
 136 static struct i2c_driver adm1029_driver = {
 137         .class          = I2C_CLASS_HWMON,
 138         .driver = {
 139                 .name = "adm1029",
 140         },
 141         .probe          = adm1029_probe,
 142         .remove         = adm1029_remove,
 143         .id_table       = adm1029_id,
 144         .detect         = adm1029_detect,
 145         .address_data   = &addr_data,
 146 };
 147
 148 /*
 149  * Client data (each client gets its own)
 150  */
 151
 152 struct adm1029_data {
 153         struct device *hwmon_dev;
 154         struct mutex update_lock;
 155         char valid;             /* zero until following fields are valid */
 156         unsigned long last_updated;     /* in jiffies */
 157
 158         /* registers values, signed for temperature, unsigned for other stuff */
 159         s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
 160         u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
 161         u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
 162 };
 163
 164 /*
 165  * Sysfs stuff
 166  */
 167
 168 static ssize_t
 169 show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
 170 {
 171         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 172         struct adm1029_data *data = adm1029_update_device(dev);
 173         return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
 174 }
 175
 176 static ssize_t
 177 show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
 178 {
 179         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 180         struct adm1029_data *data = adm1029_update_device(dev);
 181         u16 val;
 182         if (data->fan[attr->index] == 0
 183             || (data->fan_div[attr->index] & 0xC0) == 0
 184             || data->fan[attr->index] == 255) {
 185                 return sprintf(buf, "0\n");
 186         }
 187
 188         val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
 189             / data->fan[attr->index];
 190         return sprintf(buf, "%d\n", val);
 191 }
 192
 193 static ssize_t
 194 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
 195 {
 196         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 197         struct adm1029_data *data = adm1029_update_device(dev);
 198         if ((data->fan_div[attr->index] & 0xC0) == 0)
 199                 return sprintf(buf, "0\n");
 200         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 201 }
 202
 203 static ssize_t set_fan_div(struct device *dev,
 204             struct device_attribute *devattr, const char *buf, size_t count)
 205 {
 206         struct i2c_client *client = to_i2c_client(dev);
 207         struct adm1029_data *data = i2c_get_clientdata(client);
 208         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 209         long val = simple_strtol(buf, NULL, 10);
 210         u8 reg;
 211
 212         mutex_lock(&data->update_lock);
 213
 214         /*Read actual config */
 215         reg = i2c_smbus_read_byte_data(client,
 216                                        ADM1029_REG_FAN_DIV[attr->index]);
 217
 218         switch (val) {
 219         case 1:
 220                 val = 1;
 221                 break;
 222         case 2:
 223                 val = 2;
 224                 break;
 225         case 4:
 226                 val = 3;
 227                 break;
 228         default:
 229                 mutex_unlock(&data->update_lock);
 230                 dev_err(&client->dev, "fan_div value %ld not "
 231                         "supported. Choose one of 1, 2 or 4!\n", val);
 232                 return -EINVAL;
 233         }
 234         /* Update the value */
 235         reg = (reg & 0x3F) | (val << 6);
 236
 237         /* Write value */
 238         i2c_smbus_write_byte_data(client,
 239                                   ADM1029_REG_FAN_DIV[attr->index], reg);
 240         mutex_unlock(&data->update_lock);
 241
 242         return count;
 243 }
 244
 245 /*
 246 Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others
 247                         S_IWUSR stand for Is Writable by User
 248 */
 249 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 250 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
 251 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
 252
 253 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3);
 254 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4);
 255 static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5);
 256
 257 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6);
 258 static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7);
 259 static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8);
 260
 261 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 262 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 263
 264 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2);
 265 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3);
 266
 267 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 268                           show_fan_div, set_fan_div, 0);
 269 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 270                           show_fan_div, set_fan_div, 1);
 271
 272 static struct attribute *adm1029_attributes[] = {
 273         &sensor_dev_attr_temp1_input.dev_attr.attr,
 274         &sensor_dev_attr_temp1_min.dev_attr.attr,
 275         &sensor_dev_attr_temp1_max.dev_attr.attr,
 276         &sensor_dev_attr_temp2_input.dev_attr.attr,
 277         &sensor_dev_attr_temp2_min.dev_attr.attr,
 278         &sensor_dev_attr_temp2_max.dev_attr.attr,
 279         &sensor_dev_attr_temp3_input.dev_attr.attr,
 280         &sensor_dev_attr_temp3_min.dev_attr.attr,
 281         &sensor_dev_attr_temp3_max.dev_attr.attr,
 282         &sensor_dev_attr_fan1_input.dev_attr.attr,
 283         &sensor_dev_attr_fan2_input.dev_attr.attr,
 284         &sensor_dev_attr_fan1_min.dev_attr.attr,
 285         &sensor_dev_attr_fan2_min.dev_attr.attr,
 286         &sensor_dev_attr_fan1_div.dev_attr.attr,
 287         &sensor_dev_attr_fan2_div.dev_attr.attr,
 288         NULL
 289 };
 290
 291 static const struct attribute_group adm1029_group = {
 292         .attrs = adm1029_attributes,
 293 };
 294
 295 /*
 296  * Real code
 297  */
 298
 299 /* Return 0 if detection is successful, -ENODEV otherwise */
 300 static int adm1029_detect(struct i2c_client *client, int kind,
 301                           struct i2c_board_info *info)
 302 {
 303         struct i2c_adapter *adapter = client->adapter;
 304         u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
 305
 306         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 307                 return -ENODEV;
 308
 309         /* ADM1029 doesn't have CHIP ID, check just MAN ID
 310          * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
 311          * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
 312          * documented
 313          */
 314
 315         man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
 316         chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
 317         temp_devices_installed = i2c_smbus_read_byte_data(client,
 318                                         ADM1029_REG_TEMP_DEVICES_INSTALLED);
 319         nb_fan_support = i2c_smbus_read_byte_data(client,
 320                                                 ADM1029_REG_NB_FAN_SUPPORT);
 321         /* 0x41 is Analog Devices */
 322         if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
 323             || nb_fan_support != 0x03)
 324                 return -ENODEV;
 325
 326         if ((chip_id & 0xF0) != 0x00) {
 327                 /* There are no "official" CHIP ID, so actually
 328                  * we use Major/Minor revision for that */
 329                 pr_info("adm1029: Unknown major revision %x, "
 330                         "please let us know\n", chip_id);
 331                 return -ENODEV;
 332         }
 333
 334         strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
 335
 336         return 0;
 337 }
 338
 339 static int adm1029_probe(struct i2c_client *client,
 340                          const struct i2c_device_id *id)
 341 {
 342         struct adm1029_data *data;
 343         int err;
 344
 345         data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL);
 346         if (!data) {
 347                 err = -ENOMEM;
 348                 goto exit;
 349         }
 350
 351         i2c_set_clientdata(client, data);
 352         mutex_init(&data->update_lock);
 353
 354         /*
 355          * Initialize the ADM1029 chip
 356          * Check config register
 357          */
 358         if (adm1029_init_client(client) == 0) {
 359                 err = -ENODEV;
 360                 goto exit_free;
 361         }
 362
 363         /* Register sysfs hooks */
 364         if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
 365                 goto exit_free;
 366
 367         data->hwmon_dev = hwmon_device_register(&client->dev);
 368         if (IS_ERR(data->hwmon_dev)) {
 369                 err = PTR_ERR(data->hwmon_dev);
 370                 goto exit_remove_files;
 371         }
 372
 373         return 0;
 374
 375  exit_remove_files:
 376         sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 377  exit_free:
 378         kfree(data);
 379  exit:
 380         return err;
 381 }
 382
 383 static int adm1029_init_client(struct i2c_client *client)
 384 {
 385         u8 config;
 386         config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
 387         if ((config & 0x10) == 0) {
 388                 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
 389                                           config | 0x10);
 390         }
 391         /* recheck config */
 392         config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
 393         if ((config & 0x10) == 0) {
 394                 dev_err(&client->dev, "Initialization failed!\n");
 395                 return 0;
 396         }
 397         return 1;
 398 }
 399
 400 static int adm1029_remove(struct i2c_client *client)
 401 {
 402         struct adm1029_data *data = i2c_get_clientdata(client);
 403
 404         hwmon_device_unregister(data->hwmon_dev);
 405         sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 406
 407         kfree(data);
 408         return 0;
 409 }
 410
 411 /*
 412 function that update the status of the chips (temperature for example)
 413 */
 414 static struct adm1029_data *adm1029_update_device(struct device *dev)
 415 {
 416         struct i2c_client *client = to_i2c_client(dev);
 417         struct adm1029_data *data = i2c_get_clientdata(client);
 418
 419         mutex_lock(&data->update_lock);
 420         /*
 421          * Use the "cache" Luke, don't recheck values
 422          * if there are already checked not a long time later
 423          */
 424         if (time_after(jiffies, data->last_updated + HZ * 2)
 425          || !data->valid) {
 426                 int nr;
 427
 428                 dev_dbg(&client->dev, "Updating adm1029 data\n");
 429
 430                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
 431                         data->temp[nr] =
 432                             i2c_smbus_read_byte_data(client,
 433                                                      ADM1029_REG_TEMP[nr]);
 434                 }
 435                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
 436                         data->fan[nr] =
 437                             i2c_smbus_read_byte_data(client,
 438                                                      ADM1029_REG_FAN[nr]);
 439                 }
 440                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
 441                         data->fan_div[nr] =
 442                             i2c_smbus_read_byte_data(client,
 443                                                      ADM1029_REG_FAN_DIV[nr]);
 444                 }
 445
 446                 data->last_updated = jiffies;
 447                 data->valid = 1;
 448         }
 449
 450         mutex_unlock(&data->update_lock);
 451
 452         return data;
 453 }
 454
 455 /*
 456         Common module stuff
 457 */
 458 static int __init sensors_adm1029_init(void)
 459 {
 460
 461         return i2c_add_driver(&adm1029_driver);
 462 }
 463
 464 static void __exit sensors_adm1029_exit(void)
 465 {
 466
 467         i2c_del_driver(&adm1029_driver);
 468 }
 469
 470 MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>");
 471 MODULE_DESCRIPTION("adm1029 driver");
 472 MODULE_LICENSE("GPL v2");
 473
 474 module_init(sensors_adm1029_init);
 475 module_exit(sensors_adm1029_exit);