2 tristate "Data acquisition support (comedi)"
6 Enable support a wide range of data acquisition devices
10 bool "Comedi debugging"
11 depends on COMEDI != n
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
16 menuconfig COMEDI_MISC_DRIVERS
17 tristate "Comedi misc drivers"
21 Enable comedi misc drivers to be built
23 Note that the answer to this question won't directly affect the
24 kernel: saying N will just cause the configurator to skip all
25 the questions about misc non-hardware comedi drivers.
27 if COMEDI_MISC_DRIVERS
29 config COMEDI_KCOMEDILIB
30 tristate "Comedi kcomedilib"
35 tristate "Device bonding support"
36 depends on COMEDI_KCOMEDILIB
39 Enable support for a driver to 'bond' (merge) multiple subdevices
40 from multiple devices together as one.
42 To compile this driver as a module, choose M here: the module will be
46 tristate "Fake waveform generator support"
50 Enable support for the fake waveform generator.
51 This driver is mainly for testing purposes, but can also be used to
52 generate sample waveforms on systems that don't have data acquisition
55 To compile this driver as a module, choose M here: the module will be
59 tristate "Parallel port support"
62 Enable support for the standard parallel port.
63 A cheap and easy way to get a few more digital I/O lines. Steal
64 additional parallel ports from old computers or your neighbors'
67 To compile this driver as a module, choose M here: the module will be
68 called comedi_parport.
70 config COMEDI_SERIAL2002
71 tristate "Driver for serial connected hardware"
74 Enable support for serial connected hardware
76 To compile this driver as a module, choose M here: the module will be
80 tristate "Comedi skeleton driver"
83 Build the Skeleton driver, an example for driver writers
85 To compile this driver as a module, choose M here: the module will be
88 endif # COMEDI_MISC_DRIVERS
90 menuconfig COMEDI_ISA_DRIVERS
91 tristate "Comedi ISA and PC/104 drivers"
92 depends on COMEDI && ISA
95 Enable comedi ISA and PC/104 drivers to be built
97 Note that the answer to this question won't directly affect the
98 kernel: saying N will just cause the configurator to skip all
99 the questions about ISA and PC/104 comedi drivers.
101 if COMEDI_ISA_DRIVERS && ISA
103 config COMEDI_ACL7225B
104 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
107 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
108 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
110 To compile this driver as a module, choose M here: the module will be
114 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
117 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
119 To compile this driver as a module, choose M here: the module will be
123 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
127 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
128 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
130 To compile this driver as a module, choose M here: the module will be
134 tristate "Advantech PCL-725 and compatible ISA card support"
137 Enable support for Advantech PCL-725 and compatible ISA cards.
139 To compile this driver as a module, choose M here: the module will be
143 tristate "Advantech PCL-726 and compatible ISA card support"
146 Enable support for Advantech PCL-726 and compatible ISA cards.
148 To compile this driver as a module, choose M here: the module will be
152 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
155 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
158 To compile this driver as a module, choose M here: the module will be
162 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
165 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
166 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
167 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
169 To compile this driver as a module, choose M here: the module will be
173 tristate "Advantech PCL-814 and PCL-816 ISA card support"
176 Enable support for Advantech PCL-814 and PCL-816 ISA cards
178 To compile this driver as a module, choose M here: the module will be
182 tristate "Advantech PCL-718 and PCL-818 ISA card support"
185 Enable support for Advantech PCL-818 ISA cards
186 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
188 To compile this driver as a module, choose M here: the module will be
191 config COMEDI_PCM3724
192 tristate "Advantech PCM-3724 PC/104 card support"
196 Enable support for Advantech PCM-3724 PC/104 cards.
198 To compile this driver as a module, choose M here: the module will be
201 config COMEDI_PCM3730
202 tristate "Advantech PCM-3730 and clone PC/104 board support"
205 Enable support for Advantech PCM-3730 and clone PC/104 boards
207 To compile this driver as a module, choose M here: the module will be
211 tristate "Analog Devices RTI-800/815 ISA card support"
214 Enable support for Analog Devices RTI-800/815 ISA cards
216 To compile this driver as a module, choose M here: the module will be
220 tristate "Analog Devices RTI-802 ISA card support"
223 Enable support for Analog Devices RTI-802 ISA cards
225 To compile this driver as a module, choose M here: the module will be
228 config COMEDI_DAS16M1
229 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
234 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
236 To compile this driver as a module, choose M here: the module will be
240 tristate "DAS-16 compatible ISA and PC/104 card support"
245 Enable support for Keithley Metrabyte/ComputerBoards DAS16
246 and compatible ISA and PC/104 cards:
247 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
248 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
249 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
250 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
251 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
252 CIO-DAS1602/16, CIO-DAS16/330
254 To compile this driver as a module, choose M here: the module will be
258 tristate "DAS800 and compatible ISA card support"
262 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
263 Keithley Metrabyte DAS-800, DAS-801, DAS-802
264 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
267 To compile this driver as a module, choose M here: the module will be
270 config COMEDI_DAS1800
271 tristate "DAS1800 and compatible ISA card support"
275 Enable support for DAS1800 and compatible ISA cards
276 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
277 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
278 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
279 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
282 To compile this driver as a module, choose M here: the module will be
285 config COMEDI_DAS6402
286 tristate "DAS6402 and compatible ISA card support"
289 Enable support for DAS6402 and compatible ISA cards
290 Computerboards, Keithley Metrabyte DAS6402 and compatibles
292 To compile this driver as a module, choose M here: the module will be
296 tristate "Data Translation DT2801 ISA card support"
299 Enable support for Data Translation DT2801 ISA cards
301 To compile this driver as a module, choose M here: the module will be
305 tristate "Data Translation DT2811 ISA card support"
308 Enable support for Data Translation DT2811 ISA cards
310 To compile this driver as a module, choose M here: the module will be
314 tristate "Data Translation DT2814 ISA card support"
317 Enable support for Data Translation DT2814 ISA cards
319 To compile this driver as a module, choose M here: the module will be
323 tristate "Data Translation DT2815 ISA card support"
326 Enable support for Data Translation DT2815 ISA cards
328 To compile this driver as a module, choose M here: the module will be
332 tristate "Data Translation DT2817 ISA card support"
335 Enable support for Data Translation DT2817 ISA cards
337 To compile this driver as a module, choose M here: the module will be
341 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
345 Enable support for Data Translation DT2821 series including DT-EZ
346 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
347 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
348 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
350 To compile this driver as a module, choose M here: the module will be
353 config COMEDI_DMM32AT
354 tristate "Diamond Systems MM-32-AT PC/104 board support"
357 Enable support for Diamond Systems MM-32-AT PC/104 boards
359 To compile this driver as a module, choose M here: the module will be
363 tristate "FL512 ISA card support"
366 Enable support for FL512 ISA card
368 To compile this driver as a module, choose M here: the module will be
371 config COMEDI_AIO_AIO12_8
372 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
376 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
378 To compile this driver as a module, choose M here: the module will be
381 config COMEDI_AIO_IIRO_16
382 tristate "I/O Products PC/104 IIRO16 Board support"
385 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
388 To compile this driver as a module, choose M here: the module will be
391 config COMEDI_C6XDIGIO
392 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
395 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
398 To compile this driver as a module, choose M here: the module will be
402 tristate "Micro/sys MPC-624 PC/104 board support"
405 Enable support for Micro/sys MPC-624 PC/104 board
407 To compile this driver as a module, choose M here: the module will be
411 tristate "MicroAxial ADQ12-B data acquisition and control card support"
414 Enable MicroAxial ADQ12-B daq and control card support.
416 To compile this driver as a module, choose M here: the module will be
419 config COMEDI_NI_AT_A2150
420 tristate "NI AT-A2150 ISA card support"
421 depends on COMEDI_NI_COMMON
424 Enable support for National Instruments AT-A2150 cards
426 To compile this driver as a module, choose M here: the module will be
429 config COMEDI_NI_AT_AO
430 tristate "NI AT-AO-6/10 EISA card support"
431 depends on COMEDI_NI_COMMON
434 Enable support for National Instruments AT-AO-6/10 cards
436 To compile this driver as a module, choose M here: the module will be
439 config COMEDI_NI_ATMIO
440 tristate "NI AT-MIO E series ISA-PNP card support"
441 depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
444 Enable support for National Instruments AT-MIO E series cards
445 National Instruments AT-MIO-16E-1 (ni_atmio),
446 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
447 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
449 To compile this driver as a module, choose M here: the module will be
452 config COMEDI_NI_ATMIO16D
453 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
454 depends on ISAPNP && COMEDI_NI_COMMON
458 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
460 To compile this driver as a module, choose M here: the module will be
464 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
467 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
469 To compile this driver as a module, choose M here: the module will be
472 config COMEDI_PCMDA12
473 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
476 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
477 Note that the board is not ISA-PNP capable and thus needs the I/O
478 port comedi_config parameter.
480 To compile this driver as a module, choose M here: the module will be
484 tristate "Winsystems PCM-MIO PC/104 board support"
487 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
489 To compile this driver as a module, choose M here: the module will be
493 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
496 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
498 To compile this driver as a module, choose M here: the module will be
501 config COMEDI_MULTIQ3
502 tristate "Quanser Consulting MultiQ-3 ISA card support"
505 Enable support for Quanser Consulting MultiQ-3 ISA cards
507 To compile this driver as a module, choose M here: the module will be
511 tristate "Generic driver for very simple devices"
514 Enable generic support for very simple / POC (Piece of Crap) boards,
515 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
518 To compile this driver as a module, choose M here: the module will be
521 endif # COMEDI_ISA_DRIVERS
523 menuconfig COMEDI_PCI_DRIVERS
524 tristate "Comedi PCI drivers"
525 depends on COMEDI && PCI
528 Enable comedi PCI drivers to be built
530 Note that the answer to this question won't directly affect the
531 kernel: saying N will just cause the configurator to skip all
532 the questions about PCI comedi drivers.
534 if COMEDI_PCI_DRIVERS && PCI
536 config COMEDI_ADDI_APCI_035
537 tristate "ADDI-DATA APCI_035 support"
540 Enable support for ADDI-DATA APCI_035 cards
542 To compile this driver as a module, choose M here: the module will be
543 called addi_apci_035.
545 config COMEDI_ADDI_APCI_1032
546 tristate "ADDI-DATA APCI_1032 support"
549 Enable support for ADDI-DATA APCI_1032 cards
551 To compile this driver as a module, choose M here: the module will be
552 called addi_apci_1032.
554 config COMEDI_ADDI_APCI_1500
555 tristate "ADDI-DATA APCI_1500 support"
558 Enable support for ADDI-DATA APCI_1500 cards
560 To compile this driver as a module, choose M here: the module will be
561 called addi_apci_1500.
563 config COMEDI_ADDI_APCI_1516
564 tristate "ADDI-DATA APCI_1516 support"
567 Enable support for ADDI-DATA APCI_1516 cards
569 To compile this driver as a module, choose M here: the module will be
570 called addi_apci_1516.
572 config COMEDI_ADDI_APCI_1564
573 tristate "ADDI-DATA APCI_1564 support"
576 Enable support for ADDI-DATA APCI_1564 cards
578 To compile this driver as a module, choose M here: the module will be
579 called addi_apci_1564.
581 config COMEDI_ADDI_APCI_16XX
582 tristate "ADDI-DATA APCI_16xx support"
585 Enable support for ADDI-DATA APCI_16xx cards
587 To compile this driver as a module, choose M here: the module will be
588 called addi_apci_16xx.
590 config COMEDI_ADDI_APCI_2016
591 tristate "ADDI-DATA APCI_2016 support"
594 Enable support for ADDI-DATA APCI_2016 cards
596 To compile this driver as a module, choose M here: the module will be
597 called addi_apci_2016.
599 config COMEDI_ADDI_APCI_2032
600 tristate "ADDI-DATA APCI_2032 support"
603 Enable support for ADDI-DATA APCI_2032 cards
605 To compile this driver as a module, choose M here: the module will be
606 called addi_apci_2032.
608 config COMEDI_ADDI_APCI_2200
609 tristate "ADDI-DATA APCI_2200 support"
612 Enable support for ADDI-DATA APCI_2200 cards
614 To compile this driver as a module, choose M here: the module will be
615 called addi_apci_2200.
617 config COMEDI_ADDI_APCI_3001
618 tristate "ADDI-DATA APCI_3001 support"
622 Enable support for ADDI-DATA APCI_3001 cards
624 To compile this driver as a module, choose M here: the module will be
625 called addi_apci_3001.
627 config COMEDI_ADDI_APCI_3120
628 tristate "ADDI-DATA APCI_3520 support"
632 Enable support for ADDI-DATA APCI_3520 cards
634 To compile this driver as a module, choose M here: the module will be
635 called addi_apci_3120.
637 config COMEDI_ADDI_APCI_3501
638 tristate "ADDI-DATA APCI_3501 support"
641 Enable support for ADDI-DATA APCI_3501 cards
643 To compile this driver as a module, choose M here: the module will be
644 called addi_apci_3501.
646 config COMEDI_ADDI_APCI_3XXX
647 tristate "ADDI-DATA APCI_3xxx support"
650 Enable support for ADDI-DATA APCI_3xxx cards
652 To compile this driver as a module, choose M here: the module will be
653 called addi_apci_3xxx.
655 config COMEDI_ADL_PCI6208
656 tristate "ADLink PCI-6208A support"
660 Enable support for ADLink PCI-6208A cards
662 To compile this driver as a module, choose M here: the module will be
665 config COMEDI_ADL_PCI7230
666 tristate "ADLink PCI-7230 digital io board support"
669 Enable support for ADlink PCI-7230 digital io board support
671 To compile this driver as a module, choose M here: the module will be
674 config COMEDI_ADL_PCI7296
675 tristate "ADLink PCI-7296 96 ch. digital io board support"
678 Enable support for ADlink PCI-7296 96 ch. digital io board support
680 To compile this driver as a module, choose M here: the module will be
683 config COMEDI_ADL_PCI7432
684 tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
687 Enable support for ADlink PCI-7432 64 ch. isolated digital io board
689 To compile this driver as a module, choose M here: the module will be
692 config COMEDI_ADL_PCI8164
693 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
696 Enable support for ADlink PCI-8164 4 Axes Motion Control board
698 To compile this driver as a module, choose M here: the module will be
701 config COMEDI_ADL_PCI9111
702 tristate "ADLink PCI-9111HR support"
706 Enable support for ADlink PCI9111 cards
708 To compile this driver as a module, choose M here: the module will be
711 config COMEDI_ADL_PCI9118
712 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
716 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
718 To compile this driver as a module, choose M here: the module will be
721 config COMEDI_ADV_PCI1710
722 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
725 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
726 PCI-1713, PCI-1720 and PCI-1731
728 To compile this driver as a module, choose M here: the module will be
731 config COMEDI_ADV_PCI1723
732 tristate "Advantech PCI-1723 support"
735 Enable support for Advantech PCI-1723 cards
737 To compile this driver as a module, choose M here: the module will be
740 config COMEDI_ADV_PCI_DIO
741 tristate "Advantech PCI DIO card support"
745 Enable support for Advantech PCI DIO cards
746 PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751,
747 PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762
749 To compile this driver as a module, choose M here: the module will be
752 config COMEDI_AMPLC_DIO200
753 tristate "Amplicon PC272E and PCI272 DIO board support"
757 Enable support for Amplicon PC272E and PCI272 DIO boards
759 To compile this driver as a module, choose M here: the module will be
762 config COMEDI_AMPLC_PC236
763 tristate "Amplicon PC36AT and PCI236 DIO board support"
767 Enable support for Amplicon PC36AT and PCI236 DIO boards
769 To compile this driver as a module, choose M here: the module will be
772 config COMEDI_AMPLC_PC263
773 tristate "Amplicon PC263 and PCI263 relay board support"
776 Enable support for Amplicon PC263 and PCI263 relay boards
778 To compile this driver as a module, choose M here: the module will be
781 config COMEDI_AMPLC_PCI224
782 tristate "Amplicon PCI224 and PCI234 support"
786 Enable support for Amplicon PCI224 and PCI234 AO boards
788 To compile this driver as a module, choose M here: the module will be
791 config COMEDI_AMPLC_PCI230
792 tristate "Amplicon PCI230 and PCI260 support"
796 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
799 To compile this driver as a module, choose M here: the module will be
802 config COMEDI_CONTEC_PCI_DIO
803 tristate "Contec PIO1616L digital I/O board support"
806 Enable support for the Contec PIO1616L digital I/O board
808 To compile this driver as a module, choose M here: the module will be
809 called contec_pci_dio.
812 tristate "Data Translation DT3000 series support"
815 Enable support for Data Translation DT3000 series
816 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
819 To compile this driver as a module, choose M here: the module will be
822 config COMEDI_UNIOXX5
823 tristate "Fastwel UNIOxx-5 analog and digital io board support"
826 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
828 To compile this driver as a module, choose M here: the module will be
831 config COMEDI_GSC_HPDI
832 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
836 Enable support for General Standards Corporation high speed parallel
837 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
838 Only receive mode works, transmit not supported.
840 To compile this driver as a module, choose M here: the module will be
843 config COMEDI_ICP_MULTI
844 tristate "Inova ICP_MULTI support"
847 Enable support for Inova ICP_MULTI card
849 To compile this driver as a module, choose M here: the module will be
852 config COMEDI_II_PCI20KC
853 tristate "Intelligent Instruments PCI-20001C carrier support"
856 Enable support for Intelligent Instruments PCI-20001C carrier
857 PCI-20001, PCI-20006 and PCI-20341
859 To compile this driver as a module, choose M here: the module will be
862 config COMEDI_DAQBOARD2000
863 tristate "IOtech DAQboard/2000 support"
867 Enable support for the IOtech DAQboard/2000
869 To compile this driver as a module, choose M here: the module will be
872 config COMEDI_JR3_PCI
873 tristate "JR3/PCI force sensor board support"
876 Enable support for JR3/PCI force sensor boards
878 To compile this driver as a module, choose M here: the module will be
881 config COMEDI_KE_COUNTER
882 tristate "Kolter-Electronic PCI Counter 1 card support"
885 Enable support for Kolter-Electronic PCI Counter 1 cards
887 To compile this driver as a module, choose M here: the module will be
890 config COMEDI_CB_PCIDAS64
891 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
896 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
897 60xx, and 4020 series with the PLX 9080 PCI controller
899 To compile this driver as a module, choose M here: the module will be
902 config COMEDI_CB_PCIDAS
903 tristate "MeasurementComputing PCI-DAS support"
908 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
909 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
910 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
913 To compile this driver as a module, choose M here: the module will be
916 config COMEDI_CB_PCIDDA
917 tristate "MeasurementComputing PCI-DDA series support"
921 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
922 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
923 PCI-DDA04/16 and PCI-DDA02/16
925 To compile this driver as a module, choose M here: the module will be
928 config COMEDI_CB_PCIDIO
929 tristate "MeasurementComputing PCI-DIO series support"
933 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
934 PCI-DIO24, PCI-DIO24H and PCI-DIO48H
936 To compile this driver as a module, choose M here: the module will be
939 config COMEDI_CB_PCIMDAS
940 tristate "MeasurementComputing PCIM-DAS1602/16 support"
944 Enable support for ComputerBoards/MeasurementComputing PCI Migration
945 series PCIM-DAS1602/16
947 To compile this driver as a module, choose M here: the module will be
950 config COMEDI_CB_PCIMDDA
951 tristate "MeasurementComputing PCIM-DDA06-16 support"
955 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
957 To compile this driver as a module, choose M here: the module will be
961 tristate "Meilhaus ME-4000 support"
964 Enable support for Meilhaus PCI data acquisition cards
965 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
967 To compile this driver as a module, choose M here: the module will be
971 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
974 Enable support for Meilhaus PCI data acquisition cards
975 ME-2000i, ME-2600i and ME-3000vm1
977 To compile this driver as a module, choose M here: the module will be
980 config COMEDI_NI_6527
981 tristate "NI 6527 support"
982 depends on COMEDI_MITE
985 Enable support for the National Instruments 6527 PCI card
987 To compile this driver as a module, choose M here: the module will be
990 config COMEDI_NI_65XX
991 tristate "NI 65xx static dio PCI card support"
992 depends on COMEDI_MITE
995 Enable support for National Instruments 65xx static dio boards.
996 Supported devices: National Instruments PCI-6509 (ni_65xx),
997 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
998 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
999 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1001 To compile this driver as a module, choose M here: the module will be
1004 config COMEDI_NI_660X
1005 tristate "NI 660x counter/timer PCI card support"
1006 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1009 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1010 PXI-6602 and PXI-6608.
1012 To compile this driver as a module, choose M here: the module will be
1015 config COMEDI_NI_670X
1016 tristate "NI 670x PCI card support"
1017 depends on COMEDI_MITE
1020 Enable support for National Instruments PCI-6703 and PCI-6704
1022 To compile this driver as a module, choose M here: the module will be
1025 config COMEDI_NI_PCIDIO
1026 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
1027 depends on COMEDI_MITE
1031 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1032 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
1033 PXI-6503, PCI-6533 and PCI-6534
1034 The DIO-96 appears as four 8255 subdevices. See the 8255
1035 driver notes for details.
1037 To compile this driver as a module, choose M here: the module will be
1040 config COMEDI_NI_PCIMIO
1041 tristate "NI PCI-MIO-E series and M series support"
1042 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1045 Enable support for National Instruments PCI-MIO-E series and M series
1046 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1047 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1048 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1049 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1050 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1051 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1052 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1053 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1054 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1056 To compile this driver as a module, choose M here: the module will be
1059 config COMEDI_RTD520
1060 tristate "Real Time Devices PCI4520/DM7520 support"
1064 Enable support for Real Time Devices PCI4520/DM7520
1066 To compile this driver as a module, choose M here: the module will be
1070 tristate "Sensoray s526 support"
1073 Enable support for Sensoray s526
1075 To compile this driver as a module, choose M here: the module will be
1079 tristate "Sensoray 626 support"
1083 Enable support for Sensoray 626
1085 To compile this driver as a module, choose M here: the module will be
1088 config COMEDI_SSV_DNP
1089 tristate "SSV Embedded Systems DIL/Net-PC support"
1092 Enable support for SSV Embedded Systems DIL/Net-PC
1094 To compile this driver as a module, choose M here: the module will be
1097 endif # COMEDI_PCI_DRIVERS
1099 menuconfig COMEDI_PCMCIA_DRIVERS
1100 tristate "Comedi PCMCIA drivers"
1101 depends on COMEDI && (PCMCIA || PCCARD)
1104 Enable comedi PCMCIA and PCCARD drivers to be built
1106 Note that the answer to this question won't directly affect the
1107 kernel: saying N will just cause the configurator to skip all
1108 the questions about PCMCIA comedi drivers.
1110 if COMEDI_PCMCIA_DRIVERS && PCMCIA
1112 config COMEDI_CB_DAS16_CS
1113 tristate "CB DAS16 series PCMCIA support"
1116 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1117 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1119 To compile this driver as a module, choose M here: the module will be
1122 config COMEDI_DAS08_CS
1123 tristate "CB DAS08 PCMCIA support"
1127 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1130 To compile this driver as a module, choose M here: the module will be
1133 config COMEDI_NI_DAQ_700_CS
1134 tristate "NI DAQCard-700 PCMCIA support"
1135 depends on COMEDI_NI_COMMON
1138 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1140 To compile this driver as a module, choose M here: the module will be
1143 config COMEDI_NI_DAQ_DIO24_CS
1144 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1145 depends on COMEDI_NI_COMMON
1149 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1151 To compile this driver as a module, choose M here: the module will be
1152 called ni_daq_dio24.
1154 config COMEDI_NI_LABPC_CS
1155 tristate "NI DAQCard-1200 PCMCIA support"
1156 depends on COMEDI_NI_LABPC
1159 Enable support for the National Instruments PCMCIA DAQCard-1200
1161 To compile this driver as a module, choose M here: the module will be
1164 config COMEDI_NI_MIO_CS
1165 tristate "NI DAQCard E series PCMCIA support"
1166 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1170 Enable support for the National Instruments PCMCIA DAQCard E series
1171 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1174 To compile this driver as a module, choose M here: the module will be
1177 config COMEDI_QUATECH_DAQP_CS
1178 tristate "Quatech DAQP PCMCIA data capture card support"
1181 Enable support for the Quatech DAQP PCMCIA data capture cards
1182 DAQP-208 and DAQP-308
1184 To compile this driver as a module, choose M here: the module will be
1185 called quatech_daqp_cs.
1187 endif # COMEDI_PCMCIA_DRIVERS
1189 menuconfig COMEDI_USB_DRIVERS
1190 tristate "Comedi USB drivers"
1191 depends on COMEDI && USB
1194 Enable comedi USB drivers to be built
1196 Note that the answer to this question won't directly affect the
1197 kernel: saying N will just cause the configurator to skip all
1198 the questions about USB comedi drivers.
1200 if COMEDI_USB_DRIVERS && USB
1202 config COMEDI_DT9812
1203 tristate "DataTranslation DT9812 USB module support"
1206 Enable support for the Data Translation DT9812 USB module
1208 To compile this driver as a module, choose M here: the module will be
1211 config COMEDI_USBDUX
1212 tristate "ITL USBDUX support"
1215 Enable support for the University of Stirling USB DAQ and INCITE
1216 Technology Limited driver
1218 To compile this driver as a module, choose M here: the module will be
1221 config COMEDI_USBDUXFAST
1222 tristate "ITL USB-DUXfast support"
1226 Enable support for the University of Stirling USB-DUXfast and INCITE
1227 Technology Limited driver
1229 To compile this driver as a module, choose M here: the module will be
1232 config COMEDI_VMK80XX
1233 tristate "Velleman VM110/VM140 USB Board support"
1236 Build the Velleman USB Board Low-Level Driver supporting the
1237 K8055/K8061 aka VM110/VM140 devices
1239 To compile this driver as a module, choose M here: the module will be
1242 endif # COMEDI_USB_DRIVERS
1244 menuconfig COMEDI_NI_COMMON
1245 tristate "Comedi National Instruments card support"
1249 Enable comedi support for National Instruments cards.
1250 Modules in this section are used by many comedi NI drivers.
1252 Note that the answer to this question won't directly affect the
1253 kernel: saying N will just cause the configurator to skip all
1254 the questions about National Instruments cards.
1259 tristate "NI Mite PCI interface chip support"
1263 Enable support for National Instruments Mite PCI interface chip
1265 To compile this driver as a module, choose M here: the module will be
1268 config COMEDI_NI_TIO
1269 tristate "NI general purpose counter support"
1270 depends on COMEDI_MITE
1274 Enable support for National Instruments general purpose counters.
1275 This module is not used directly by end-users. Rather, it
1276 is used by other drivers (for example ni_660x and ni_pcimio)
1277 to provide support for NI's general purpose counters.
1279 To compile this driver as a modules, choose M here: two modules will
1280 be build: ni_tio and ni_tiocmd.
1282 config COMEDI_NI_LABPC
1283 tristate "NI Lab-PC and compatibles ISA and PCI support"
1284 depends on COMEDI_MITE
1289 Enable support for National Instruments Lab-PC and compatibles
1290 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1291 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1292 not yet been added to the driver.
1294 To compile this driver as a module, choose M here: the module will be
1297 endif # COMEDI_NI_COMMON
1300 tristate "Generic 8255 support"
1304 Enable generic 8255 support.
1306 You should enable compilation this driver if you plan to use a board
1307 that has an 8255 chip. For multifunction boards, the main driver will
1308 configure the 8255 subdevice automatically.
1310 Note that most PCI 8255 boards do NOT work with this driver, and
1311 need a separate driver as a wrapper.
1313 To compile this driver as a module, choose M here: the module will be
1317 tristate "DAS-08 compatible support"
1322 Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
1324 Note that PCMCIA DAS08 cards are not directly supported by this
1325 driver, and need a separate driver as a wrapper.
1327 To compile this driver as a module, choose M here: the module will be
1331 tristate "Comedi shared functions for low-level driver support"
1335 Enable support for shared functions for low-level drivers.
1336 This module is not used directly by end-users. Rather, it
1337 is used by many other comedi drivers.
1339 To compile this driver as a module, choose M here: the module will be