?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Driver core: change sysdev classes to use dynamic kobject names
[wandboard.git] / arch / arm / plat-omap / gpio.c
blobb2a87b8ef6734e95a3fa207a357bb5c0ecde96bd
1 /*
2 * linux/arch/arm/plat-omap/gpio.c
3 *
4 * Support functions for OMAP GPIO
5 *
6 * Copyright (C) 2003-2005 Nokia Corporation
7 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/sysdev.h>
18 #include <linux/err.h>
19 #include <linux/clk.h>
20
21 #include <asm/hardware.h>
22 #include <asm/irq.h>
23 #include <asm/arch/irqs.h>
24 #include <asm/arch/gpio.h>
25 #include <asm/mach/irq.h>
26
27 #include <asm/io.h>
28
29 /*
30 * OMAP1510 GPIO registers
31 */
32 #define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000
33 #define OMAP1510_GPIO_DATA_INPUT 0x00
34 #define OMAP1510_GPIO_DATA_OUTPUT 0x04
35 #define OMAP1510_GPIO_DIR_CONTROL 0x08
36 #define OMAP1510_GPIO_INT_CONTROL 0x0c
37 #define OMAP1510_GPIO_INT_MASK 0x10
38 #define OMAP1510_GPIO_INT_STATUS 0x14
39 #define OMAP1510_GPIO_PIN_CONTROL 0x18
40
41 #define OMAP1510_IH_GPIO_BASE 64
42
43 /*
44 * OMAP1610 specific GPIO registers
45 */
46 #define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400
47 #define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00
48 #define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400
49 #define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00
50 #define OMAP1610_GPIO_REVISION 0x0000
51 #define OMAP1610_GPIO_SYSCONFIG 0x0010
52 #define OMAP1610_GPIO_SYSSTATUS 0x0014
53 #define OMAP1610_GPIO_IRQSTATUS1 0x0018
54 #define OMAP1610_GPIO_IRQENABLE1 0x001c
55 #define OMAP1610_GPIO_WAKEUPENABLE 0x0028
56 #define OMAP1610_GPIO_DATAIN 0x002c
57 #define OMAP1610_GPIO_DATAOUT 0x0030
58 #define OMAP1610_GPIO_DIRECTION 0x0034
59 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038
60 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c
61 #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
62 #define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
63 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
64 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
65 #define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
66 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0
67
68 /*
69 * OMAP730 specific GPIO registers
70 */
71 #define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000
72 #define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800
73 #define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000
74 #define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800
75 #define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000
76 #define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800
77 #define OMAP730_GPIO_DATA_INPUT 0x00
78 #define OMAP730_GPIO_DATA_OUTPUT 0x04
79 #define OMAP730_GPIO_DIR_CONTROL 0x08
80 #define OMAP730_GPIO_INT_CONTROL 0x0c
81 #define OMAP730_GPIO_INT_MASK 0x10
82 #define OMAP730_GPIO_INT_STATUS 0x14
83
84 /*
85 * omap24xx specific GPIO registers
86 */
87 #define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000
88 #define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000
89 #define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000
90 #define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000
91
92 #define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000
93 #define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000
94 #define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000
95 #define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000
96 #define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000
97
98 #define OMAP24XX_GPIO_REVISION 0x0000
99 #define OMAP24XX_GPIO_SYSCONFIG 0x0010
100 #define OMAP24XX_GPIO_SYSSTATUS 0x0014
101 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018
102 #define OMAP24XX_GPIO_IRQSTATUS2 0x0028
103 #define OMAP24XX_GPIO_IRQENABLE2 0x002c
104 #define OMAP24XX_GPIO_IRQENABLE1 0x001c
105 #define OMAP24XX_GPIO_CTRL 0x0030
106 #define OMAP24XX_GPIO_OE 0x0034
107 #define OMAP24XX_GPIO_DATAIN 0x0038
108 #define OMAP24XX_GPIO_DATAOUT 0x003c
109 #define OMAP24XX_GPIO_LEVELDETECT0 0x0040
110 #define OMAP24XX_GPIO_LEVELDETECT1 0x0044
111 #define OMAP24XX_GPIO_RISINGDETECT 0x0048
112 #define OMAP24XX_GPIO_FALLINGDETECT 0x004c
113 #define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
114 #define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
115 #define OMAP24XX_GPIO_CLEARWKUENA 0x0080
116 #define OMAP24XX_GPIO_SETWKUENA 0x0084
117 #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
118 #define OMAP24XX_GPIO_SETDATAOUT 0x0094
119
120 struct gpio_bank {
121 void __iomem *base;
122 u16 irq;
123 u16 virtual_irq_start;
124 int method;
125 u32 reserved_map;
126 #if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX)
127 u32 suspend_wakeup;
128 u32 saved_wakeup;
129 #endif
130 #ifdef CONFIG_ARCH_OMAP24XX
131 u32 non_wakeup_gpios;
132 u32 enabled_non_wakeup_gpios;
133
134 u32 saved_datain;
135 u32 saved_fallingdetect;
136 u32 saved_risingdetect;
137 #endif
138 spinlock_t lock;
139 };
140
141 #define METHOD_MPUIO 0
142 #define METHOD_GPIO_1510 1
143 #define METHOD_GPIO_1610 2
144 #define METHOD_GPIO_730 3
145 #define METHOD_GPIO_24XX 4
146
147 #ifdef CONFIG_ARCH_OMAP16XX
148 static struct gpio_bank gpio_bank_1610[5] = {
149 { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
150 { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
151 { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
152 { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
153 { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
154 };
155 #endif
156
157 #ifdef CONFIG_ARCH_OMAP15XX
158 static struct gpio_bank gpio_bank_1510[2] = {
159 { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
160 { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
161 };
162 #endif
163
164 #ifdef CONFIG_ARCH_OMAP730
165 static struct gpio_bank gpio_bank_730[7] = {
166 { OMAP_MPUIO_BASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
167 { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
168 { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
169 { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
170 { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 },
171 { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 },
172 { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 },
173 };
174 #endif
175
176 #ifdef CONFIG_ARCH_OMAP24XX
177
178 static struct gpio_bank gpio_bank_242x[4] = {
179 { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
180 { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
181 { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
182 { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
183 };
184
185 static struct gpio_bank gpio_bank_243x[5] = {
186 { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
187 { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
188 { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
189 { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
190 { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
191 };
192
193 #endif
194
195 static struct gpio_bank *gpio_bank;
196 static int gpio_bank_count;
197
198 static inline struct gpio_bank *get_gpio_bank(int gpio)
199 {
200 #ifdef CONFIG_ARCH_OMAP15XX
201 if (cpu_is_omap15xx()) {
202 if (OMAP_GPIO_IS_MPUIO(gpio))
203 return &gpio_bank[0];
204 return &gpio_bank[1];
205 }
206 #endif
207 #if defined(CONFIG_ARCH_OMAP16XX)
208 if (cpu_is_omap16xx()) {
209 if (OMAP_GPIO_IS_MPUIO(gpio))
210 return &gpio_bank[0];
211 return &gpio_bank[1 + (gpio >> 4)];
212 }
213 #endif
214 #ifdef CONFIG_ARCH_OMAP730
215 if (cpu_is_omap730()) {
216 if (OMAP_GPIO_IS_MPUIO(gpio))
217 return &gpio_bank[0];
218 return &gpio_bank[1 + (gpio >> 5)];
219 }
220 #endif
221 #ifdef CONFIG_ARCH_OMAP24XX
222 if (cpu_is_omap24xx())
223 return &gpio_bank[gpio >> 5];
224 #endif
225 }
226
227 static inline int get_gpio_index(int gpio)
228 {
229 #ifdef CONFIG_ARCH_OMAP730
230 if (cpu_is_omap730())
231 return gpio & 0x1f;
232 #endif
233 #ifdef CONFIG_ARCH_OMAP24XX
234 if (cpu_is_omap24xx())
235 return gpio & 0x1f;
236 #endif
237 return gpio & 0x0f;
238 }
239
240 static inline int gpio_valid(int gpio)
241 {
242 if (gpio < 0)
243 return -1;
244 #ifndef CONFIG_ARCH_OMAP24XX
245 if (OMAP_GPIO_IS_MPUIO(gpio)) {
246 if (gpio >= OMAP_MAX_GPIO_LINES + 16)
247 return -1;
248 return 0;
249 }
250 #endif
251 #ifdef CONFIG_ARCH_OMAP15XX
252 if (cpu_is_omap15xx() && gpio < 16)
253 return 0;
254 #endif
255 #if defined(CONFIG_ARCH_OMAP16XX)
256 if ((cpu_is_omap16xx()) && gpio < 64)
257 return 0;
258 #endif
259 #ifdef CONFIG_ARCH_OMAP730
260 if (cpu_is_omap730() && gpio < 192)
261 return 0;
262 #endif
263 #ifdef CONFIG_ARCH_OMAP24XX
264 if (cpu_is_omap24xx() && gpio < 128)
265 return 0;
266 #endif
267 return -1;
268 }
269
270 static int check_gpio(int gpio)
271 {
272 if (unlikely(gpio_valid(gpio)) < 0) {
273 printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
274 dump_stack();
275 return -1;
276 }
277 return 0;
278 }
279
280 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
281 {
282 void __iomem *reg = bank->base;
283 u32 l;
284
285 switch (bank->method) {
286 #ifdef CONFIG_ARCH_OMAP1
287 case METHOD_MPUIO:
288 reg += OMAP_MPUIO_IO_CNTL;
289 break;
290 #endif
291 #ifdef CONFIG_ARCH_OMAP15XX
292 case METHOD_GPIO_1510:
293 reg += OMAP1510_GPIO_DIR_CONTROL;
294 break;
295 #endif
296 #ifdef CONFIG_ARCH_OMAP16XX
297 case METHOD_GPIO_1610:
298 reg += OMAP1610_GPIO_DIRECTION;
299 break;
300 #endif
301 #ifdef CONFIG_ARCH_OMAP730
302 case METHOD_GPIO_730:
303 reg += OMAP730_GPIO_DIR_CONTROL;
304 break;
305 #endif
306 #ifdef CONFIG_ARCH_OMAP24XX
307 case METHOD_GPIO_24XX:
308 reg += OMAP24XX_GPIO_OE;
309 break;
310 #endif
311 default:
312 WARN_ON(1);
313 return;
314 }
315 l = __raw_readl(reg);
316 if (is_input)
317 l |= 1 << gpio;
318 else
319 l &= ~(1 << gpio);
320 __raw_writel(l, reg);
321 }
322
323 void omap_set_gpio_direction(int gpio, int is_input)
324 {
325 struct gpio_bank *bank;
326
327 if (check_gpio(gpio) < 0)
328 return;
329 bank = get_gpio_bank(gpio);
330 spin_lock(&bank->lock);
331 _set_gpio_direction(bank, get_gpio_index(gpio), is_input);
332 spin_unlock(&bank->lock);
333 }
334
335 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
336 {
337 void __iomem *reg = bank->base;
338 u32 l = 0;
339
340 switch (bank->method) {
341 #ifdef CONFIG_ARCH_OMAP1
342 case METHOD_MPUIO:
343 reg += OMAP_MPUIO_OUTPUT;
344 l = __raw_readl(reg);
345 if (enable)
346 l |= 1 << gpio;
347 else
348 l &= ~(1 << gpio);
349 break;
350 #endif
351 #ifdef CONFIG_ARCH_OMAP15XX
352 case METHOD_GPIO_1510:
353 reg += OMAP1510_GPIO_DATA_OUTPUT;
354 l = __raw_readl(reg);
355 if (enable)
356 l |= 1 << gpio;
357 else
358 l &= ~(1 << gpio);
359 break;
360 #endif
361 #ifdef CONFIG_ARCH_OMAP16XX
362 case METHOD_GPIO_1610:
363 if (enable)
364 reg += OMAP1610_GPIO_SET_DATAOUT;
365 else
366 reg += OMAP1610_GPIO_CLEAR_DATAOUT;
367 l = 1 << gpio;
368 break;
369 #endif
370 #ifdef CONFIG_ARCH_OMAP730
371 case METHOD_GPIO_730:
372 reg += OMAP730_GPIO_DATA_OUTPUT;
373 l = __raw_readl(reg);
374 if (enable)
375 l |= 1 << gpio;
376 else
377 l &= ~(1 << gpio);
378 break;
379 #endif
380 #ifdef CONFIG_ARCH_OMAP24XX
381 case METHOD_GPIO_24XX:
382 if (enable)
383 reg += OMAP24XX_GPIO_SETDATAOUT;
384 else
385 reg += OMAP24XX_GPIO_CLEARDATAOUT;
386 l = 1 << gpio;
387 break;
388 #endif
389 default:
390 WARN_ON(1);
391 return;
392 }
393 __raw_writel(l, reg);
394 }
395
396 void omap_set_gpio_dataout(int gpio, int enable)
397 {
398 struct gpio_bank *bank;
399
400 if (check_gpio(gpio) < 0)
401 return;
402 bank = get_gpio_bank(gpio);
403 spin_lock(&bank->lock);
404 _set_gpio_dataout(bank, get_gpio_index(gpio), enable);
405 spin_unlock(&bank->lock);
406 }
407
408 int omap_get_gpio_datain(int gpio)
409 {
410 struct gpio_bank *bank;
411 void __iomem *reg;
412
413 if (check_gpio(gpio) < 0)
414 return -EINVAL;
415 bank = get_gpio_bank(gpio);
416 reg = bank->base;
417 switch (bank->method) {
418 #ifdef CONFIG_ARCH_OMAP1
419 case METHOD_MPUIO:
420 reg += OMAP_MPUIO_INPUT_LATCH;
421 break;
422 #endif
423 #ifdef CONFIG_ARCH_OMAP15XX
424 case METHOD_GPIO_1510:
425 reg += OMAP1510_GPIO_DATA_INPUT;
426 break;
427 #endif
428 #ifdef CONFIG_ARCH_OMAP16XX
429 case METHOD_GPIO_1610:
430 reg += OMAP1610_GPIO_DATAIN;
431 break;
432 #endif
433 #ifdef CONFIG_ARCH_OMAP730
434 case METHOD_GPIO_730:
435 reg += OMAP730_GPIO_DATA_INPUT;
436 break;
437 #endif
438 #ifdef CONFIG_ARCH_OMAP24XX
439 case METHOD_GPIO_24XX:
440 reg += OMAP24XX_GPIO_DATAIN;
441 break;
442 #endif
443 default:
444 return -EINVAL;
445 }
446 return (__raw_readl(reg)
447 & (1 << get_gpio_index(gpio))) != 0;
448 }
449
450 #define MOD_REG_BIT(reg, bit_mask, set) \
451 do { \
452 int l = __raw_readl(base + reg); \
453 if (set) l |= bit_mask; \
454 else l &= ~bit_mask; \
455 __raw_writel(l, base + reg); \
456 } while(0)
457
458 #ifdef CONFIG_ARCH_OMAP24XX
459 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
460 {
461 void __iomem *base = bank->base;
462 u32 gpio_bit = 1 << gpio;
463
464 MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
465 trigger & __IRQT_LOWLVL);
466 MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
467 trigger & __IRQT_HIGHLVL);
468 MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
469 trigger & __IRQT_RISEDGE);
470 MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
471 trigger & __IRQT_FALEDGE);
472 if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
473 if (trigger != 0)
474 __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA);
475 else
476 __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA);
477 } else {
478 if (trigger != 0)
479 bank->enabled_non_wakeup_gpios |= gpio_bit;
480 else
481 bank->enabled_non_wakeup_gpios &= ~gpio_bit;
482 }
483 /* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level
484 * triggering requested. */
485 }
486 #endif
487
488 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
489 {
490 void __iomem *reg = bank->base;
491 u32 l = 0;
492
493 switch (bank->method) {
494 #ifdef CONFIG_ARCH_OMAP1
495 case METHOD_MPUIO:
496 reg += OMAP_MPUIO_GPIO_INT_EDGE;
497 l = __raw_readl(reg);
498 if (trigger & __IRQT_RISEDGE)
499 l |= 1 << gpio;
500 else if (trigger & __IRQT_FALEDGE)
501 l &= ~(1 << gpio);
502 else
503 goto bad;
504 break;
505 #endif
506 #ifdef CONFIG_ARCH_OMAP15XX
507 case METHOD_GPIO_1510:
508 reg += OMAP1510_GPIO_INT_CONTROL;
509 l = __raw_readl(reg);
510 if (trigger & __IRQT_RISEDGE)
511 l |= 1 << gpio;
512 else if (trigger & __IRQT_FALEDGE)
513 l &= ~(1 << gpio);
514 else
515 goto bad;
516 break;
517 #endif
518 #ifdef CONFIG_ARCH_OMAP16XX
519 case METHOD_GPIO_1610:
520 if (gpio & 0x08)
521 reg += OMAP1610_GPIO_EDGE_CTRL2;
522 else
523 reg += OMAP1610_GPIO_EDGE_CTRL1;
524 gpio &= 0x07;
525 l = __raw_readl(reg);
526 l &= ~(3 << (gpio << 1));
527 if (trigger & __IRQT_RISEDGE)
528 l |= 2 << (gpio << 1);
529 if (trigger & __IRQT_FALEDGE)
530 l |= 1 << (gpio << 1);
531 if (trigger)
532 /* Enable wake-up during idle for dynamic tick */
533 __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
534 else
535 __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
536 break;
537 #endif
538 #ifdef CONFIG_ARCH_OMAP730
539 case METHOD_GPIO_730:
540 reg += OMAP730_GPIO_INT_CONTROL;
541 l = __raw_readl(reg);
542 if (trigger & __IRQT_RISEDGE)
543 l |= 1 << gpio;
544 else if (trigger & __IRQT_FALEDGE)
545 l &= ~(1 << gpio);
546 else
547 goto bad;
548 break;
549 #endif
550 #ifdef CONFIG_ARCH_OMAP24XX
551 case METHOD_GPIO_24XX:
552 set_24xx_gpio_triggering(bank, gpio, trigger);
553 break;
554 #endif
555 default:
556 goto bad;
557 }
558 __raw_writel(l, reg);
559 return 0;
560 bad:
561 return -EINVAL;
562 }
563
564 static int gpio_irq_type(unsigned irq, unsigned type)
565 {
566 struct gpio_bank *bank;
567 unsigned gpio;
568 int retval;
569
570 if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE)
571 gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
572 else
573 gpio = irq - IH_GPIO_BASE;
574
575 if (check_gpio(gpio) < 0)
576 return -EINVAL;
577
578 if (type & ~IRQ_TYPE_SENSE_MASK)
579 return -EINVAL;
580
581 /* OMAP1 allows only only edge triggering */
582 if (!cpu_is_omap24xx()
583 && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
584 return -EINVAL;
585
586 bank = get_irq_chip_data(irq);
587 spin_lock(&bank->lock);
588 retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
589 if (retval == 0) {
590 irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
591 irq_desc[irq].status |= type;
592 }
593 spin_unlock(&bank->lock);
594 return retval;
595 }
596
597 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
598 {
599 void __iomem *reg = bank->base;
600
601 switch (bank->method) {
602 #ifdef CONFIG_ARCH_OMAP1
603 case METHOD_MPUIO:
604 /* MPUIO irqstatus is reset by reading the status register,
605 * so do nothing here */
606 return;
607 #endif
608 #ifdef CONFIG_ARCH_OMAP15XX
609 case METHOD_GPIO_1510:
610 reg += OMAP1510_GPIO_INT_STATUS;
611 break;
612 #endif
613 #ifdef CONFIG_ARCH_OMAP16XX
614 case METHOD_GPIO_1610:
615 reg += OMAP1610_GPIO_IRQSTATUS1;
616 break;
617 #endif
618 #ifdef CONFIG_ARCH_OMAP730
619 case METHOD_GPIO_730:
620 reg += OMAP730_GPIO_INT_STATUS;
621 break;
622 #endif
623 #ifdef CONFIG_ARCH_OMAP24XX
624 case METHOD_GPIO_24XX:
625 reg += OMAP24XX_GPIO_IRQSTATUS1;
626 break;
627 #endif
628 default:
629 WARN_ON(1);
630 return;
631 }
632 __raw_writel(gpio_mask, reg);
633
634 /* Workaround for clearing DSP GPIO interrupts to allow retention */
635 if (cpu_is_omap2420())
636 __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
637 }
638
639 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
640 {
641 _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
642 }
643
644 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
645 {
646 void __iomem *reg = bank->base;
647 int inv = 0;
648 u32 l;
649 u32 mask;
650
651 switch (bank->method) {
652 #ifdef CONFIG_ARCH_OMAP1
653 case METHOD_MPUIO:
654 reg += OMAP_MPUIO_GPIO_MASKIT;
655 mask = 0xffff;
656 inv = 1;
657 break;
658 #endif
659 #ifdef CONFIG_ARCH_OMAP15XX
660 case METHOD_GPIO_1510:
661 reg += OMAP1510_GPIO_INT_MASK;
662 mask = 0xffff;
663 inv = 1;
664 break;
665 #endif
666 #ifdef CONFIG_ARCH_OMAP16XX
667 case METHOD_GPIO_1610:
668 reg += OMAP1610_GPIO_IRQENABLE1;
669 mask = 0xffff;
670 break;
671 #endif
672 #ifdef CONFIG_ARCH_OMAP730
673 case METHOD_GPIO_730:
674 reg += OMAP730_GPIO_INT_MASK;
675 mask = 0xffffffff;
676 inv = 1;
677 break;
678 #endif
679 #ifdef CONFIG_ARCH_OMAP24XX
680 case METHOD_GPIO_24XX:
681 reg += OMAP24XX_GPIO_IRQENABLE1;
682 mask = 0xffffffff;
683 break;
684 #endif
685 default:
686 WARN_ON(1);
687 return 0;
688 }
689
690 l = __raw_readl(reg);
691 if (inv)
692 l = ~l;
693 l &= mask;
694 return l;
695 }
696
697 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
698 {
699 void __iomem *reg = bank->base;
700 u32 l;
701
702 switch (bank->method) {
703 #ifdef CONFIG_ARCH_OMAP1
704 case METHOD_MPUIO:
705 reg += OMAP_MPUIO_GPIO_MASKIT;
706 l = __raw_readl(reg);
707 if (enable)
708 l &= ~(gpio_mask);
709 else
710 l |= gpio_mask;
711 break;
712 #endif
713 #ifdef CONFIG_ARCH_OMAP15XX
714 case METHOD_GPIO_1510:
715 reg += OMAP1510_GPIO_INT_MASK;
716 l = __raw_readl(reg);
717 if (enable)
718 l &= ~(gpio_mask);
719 else
720 l |= gpio_mask;
721 break;
722 #endif
723 #ifdef CONFIG_ARCH_OMAP16XX
724 case METHOD_GPIO_1610:
725 if (enable)
726 reg += OMAP1610_GPIO_SET_IRQENABLE1;
727 else
728 reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
729 l = gpio_mask;
730 break;
731 #endif
732 #ifdef CONFIG_ARCH_OMAP730
733 case METHOD_GPIO_730:
734 reg += OMAP730_GPIO_INT_MASK;
735 l = __raw_readl(reg);
736 if (enable)
737 l &= ~(gpio_mask);
738 else
739 l |= gpio_mask;
740 break;
741 #endif
742 #ifdef CONFIG_ARCH_OMAP24XX
743 case METHOD_GPIO_24XX:
744 if (enable)
745 reg += OMAP24XX_GPIO_SETIRQENABLE1;
746 else
747 reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
748 l = gpio_mask;
749 break;
750 #endif
751 default:
752 WARN_ON(1);
753 return;
754 }
755 __raw_writel(l, reg);
756 }
757
758 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
759 {
760 _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
761 }
762
763 /*
764 * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
765 * 1510 does not seem to have a wake-up register. If JTAG is connected
766 * to the target, system will wake up always on GPIO events. While
767 * system is running all registered GPIO interrupts need to have wake-up
768 * enabled. When system is suspended, only selected GPIO interrupts need
769 * to have wake-up enabled.
770 */
771 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
772 {
773 switch (bank->method) {
774 #ifdef CONFIG_ARCH_OMAP16XX
775 case METHOD_MPUIO:
776 case METHOD_GPIO_1610:
777 spin_lock(&bank->lock);
778 if (enable) {
779 bank->suspend_wakeup |= (1 << gpio);
780 enable_irq_wake(bank->irq);
781 } else {
782 disable_irq_wake(bank->irq);
783 bank->suspend_wakeup &= ~(1 << gpio);
784 }
785 spin_unlock(&bank->lock);
786 return 0;
787 #endif
788 #ifdef CONFIG_ARCH_OMAP24XX
789 case METHOD_GPIO_24XX:
790 if (bank->non_wakeup_gpios & (1 << gpio)) {
791 printk(KERN_ERR "Unable to modify wakeup on "
792 "non-wakeup GPIO%d\n",
793 (bank - gpio_bank) * 32 + gpio);
794 return -EINVAL;
795 }
796 spin_lock(&bank->lock);
797 if (enable) {
798 bank->suspend_wakeup |= (1 << gpio);
799 enable_irq_wake(bank->irq);
800 } else {
801 disable_irq_wake(bank->irq);
802 bank->suspend_wakeup &= ~(1 << gpio);
803 }
804 spin_unlock(&bank->lock);
805 return 0;
806 #endif
807 default:
808 printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
809 bank->method);
810 return -EINVAL;
811 }
812 }
813
814 static void _reset_gpio(struct gpio_bank *bank, int gpio)
815 {
816 _set_gpio_direction(bank, get_gpio_index(gpio), 1);
817 _set_gpio_irqenable(bank, gpio, 0);
818 _clear_gpio_irqstatus(bank, gpio);
819 _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
820 }
821
822 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
823 static int gpio_wake_enable(unsigned int irq, unsigned int enable)
824 {
825 unsigned int gpio = irq - IH_GPIO_BASE;
826 struct gpio_bank *bank;
827 int retval;
828
829 if (check_gpio(gpio) < 0)
830 return -ENODEV;
831 bank = get_irq_chip_data(irq);
832 retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
833
834 return retval;
835 }
836
837 int omap_request_gpio(int gpio)
838 {
839 struct gpio_bank *bank;
840
841 if (check_gpio(gpio) < 0)
842 return -EINVAL;
843
844 bank = get_gpio_bank(gpio);
845 spin_lock(&bank->lock);
846 if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
847 printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
848 dump_stack();
849 spin_unlock(&bank->lock);
850 return -1;
851 }
852 bank->reserved_map |= (1 << get_gpio_index(gpio));
853
854 /* Set trigger to none. You need to enable the desired trigger with
855 * request_irq() or set_irq_type().
856 */
857 _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
858
859 #ifdef CONFIG_ARCH_OMAP15XX
860 if (bank->method == METHOD_GPIO_1510) {
861 void __iomem *reg;
862
863 /* Claim the pin for MPU */
864 reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
865 __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
866 }
867 #endif
868 spin_unlock(&bank->lock);
869
870 return 0;
871 }
872
873 void omap_free_gpio(int gpio)
874 {
875 struct gpio_bank *bank;
876
877 if (check_gpio(gpio) < 0)
878 return;
879 bank = get_gpio_bank(gpio);
880 spin_lock(&bank->lock);
881 if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
882 printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
883 dump_stack();
884 spin_unlock(&bank->lock);
885 return;
886 }
887 #ifdef CONFIG_ARCH_OMAP16XX
888 if (bank->method == METHOD_GPIO_1610) {
889 /* Disable wake-up during idle for dynamic tick */
890 void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
891 __raw_writel(1 << get_gpio_index(gpio), reg);
892 }
893 #endif
894 #ifdef CONFIG_ARCH_OMAP24XX
895 if (bank->method == METHOD_GPIO_24XX) {
896 /* Disable wake-up during idle for dynamic tick */
897 void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
898 __raw_writel(1 << get_gpio_index(gpio), reg);
899 }
900 #endif
901 bank->reserved_map &= ~(1 << get_gpio_index(gpio));
902 _reset_gpio(bank, gpio);
903 spin_unlock(&bank->lock);
904 }
905
906 /*
907 * We need to unmask the GPIO bank interrupt as soon as possible to
908 * avoid missing GPIO interrupts for other lines in the bank.
909 * Then we need to mask-read-clear-unmask the triggered GPIO lines
910 * in the bank to avoid missing nested interrupts for a GPIO line.
911 * If we wait to unmask individual GPIO lines in the bank after the
912 * line's interrupt handler has been run, we may miss some nested
913 * interrupts.
914 */
915 static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
916 {
917 void __iomem *isr_reg = NULL;
918 u32 isr;
919 unsigned int gpio_irq;
920 struct gpio_bank *bank;
921 u32 retrigger = 0;
922 int unmasked = 0;
923
924 desc->chip->ack(irq);
925
926 bank = get_irq_data(irq);
927 #ifdef CONFIG_ARCH_OMAP1
928 if (bank->method == METHOD_MPUIO)
929 isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
930 #endif
931 #ifdef CONFIG_ARCH_OMAP15XX
932 if (bank->method == METHOD_GPIO_1510)
933 isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
934 #endif
935 #if defined(CONFIG_ARCH_OMAP16XX)
936 if (bank->method == METHOD_GPIO_1610)
937 isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
938 #endif
939 #ifdef CONFIG_ARCH_OMAP730
940 if (bank->method == METHOD_GPIO_730)
941 isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
942 #endif
943 #ifdef CONFIG_ARCH_OMAP24XX
944 if (bank->method == METHOD_GPIO_24XX)
945 isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
946 #endif
947 while(1) {
948 u32 isr_saved, level_mask = 0;
949 u32 enabled;
950
951 enabled = _get_gpio_irqbank_mask(bank);
952 isr_saved = isr = __raw_readl(isr_reg) & enabled;
953
954 if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
955 isr &= 0x0000ffff;
956
957 if (cpu_is_omap24xx()) {
958 level_mask =
959 __raw_readl(bank->base +
960 OMAP24XX_GPIO_LEVELDETECT0) |
961 __raw_readl(bank->base +
962 OMAP24XX_GPIO_LEVELDETECT1);
963 level_mask &= enabled;
964 }
965
966 /* clear edge sensitive interrupts before handler(s) are
967 called so that we don't miss any interrupt occurred while
968 executing them */
969 _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
970 _clear_gpio_irqbank(bank, isr_saved & ~level_mask);
971 _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
972
973 /* if there is only edge sensitive GPIO pin interrupts
974 configured, we could unmask GPIO bank interrupt immediately */
975 if (!level_mask && !unmasked) {
976 unmasked = 1;
977 desc->chip->unmask(irq);
978 }
979
980 isr |= retrigger;
981 retrigger = 0;
982 if (!isr)
983 break;
984
985 gpio_irq = bank->virtual_irq_start;
986 for (; isr != 0; isr >>= 1, gpio_irq++) {
987 struct irq_desc *d;
988 int irq_mask;
989 if (!(isr & 1))
990 continue;
991 d = irq_desc + gpio_irq;
992 /* Don't run the handler if it's already running
993 * or was disabled lazely.
994 */
995 if (unlikely((d->depth ||
996 (d->status & IRQ_INPROGRESS)))) {
997 irq_mask = 1 <<
998 (gpio_irq - bank->virtual_irq_start);
999 /* The unmasking will be done by
1000 * enable_irq in case it is disabled or
1001 * after returning from the handler if
1002 * it's already running.
1003 */
1004 _enable_gpio_irqbank(bank, irq_mask, 0);
1005 if (!d->depth) {
1006 /* Level triggered interrupts
1007 * won't ever be reentered
1008 */
1009 BUG_ON(level_mask & irq_mask);
1010 d->status |= IRQ_PENDING;
1011 }
1012 continue;
1013 }
1014
1015 desc_handle_irq(gpio_irq, d);
1016
1017 if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
1018 irq_mask = 1 <<
1019 (gpio_irq - bank->virtual_irq_start);
1020 d->status &= ~IRQ_PENDING;
1021 _enable_gpio_irqbank(bank, irq_mask, 1);
1022 retrigger |= irq_mask;
1023 }
1024 }
1025
1026 if (cpu_is_omap24xx()) {
1027 /* clear level sensitive interrupts after handler(s) */
1028 _enable_gpio_irqbank(bank, isr_saved & level_mask, 0);
1029 _clear_gpio_irqbank(bank, isr_saved & level_mask);
1030 _enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
1031 }
1032
1033 }
1034 /* if bank has any level sensitive GPIO pin interrupt
1035 configured, we must unmask the bank interrupt only after
1036 handler(s) are executed in order to avoid spurious bank
1037 interrupt */
1038 if (!unmasked)
1039 desc->chip->unmask(irq);
1040
1041 }
1042
1043 static void gpio_irq_shutdown(unsigned int irq)
1044 {
1045 unsigned int gpio = irq - IH_GPIO_BASE;
1046 struct gpio_bank *bank = get_irq_chip_data(irq);
1047
1048 _reset_gpio(bank, gpio);
1049 }
1050
1051 static void gpio_ack_irq(unsigned int irq)
1052 {
1053 unsigned int gpio = irq - IH_GPIO_BASE;
1054 struct gpio_bank *bank = get_irq_chip_data(irq);
1055
1056 _clear_gpio_irqstatus(bank, gpio);
1057 }
1058
1059 static void gpio_mask_irq(unsigned int irq)
1060 {
1061 unsigned int gpio = irq - IH_GPIO_BASE;
1062 struct gpio_bank *bank = get_irq_chip_data(irq);
1063
1064 _set_gpio_irqenable(bank, gpio, 0);
1065 }
1066
1067 static void gpio_unmask_irq(unsigned int irq)
1068 {
1069 unsigned int gpio = irq - IH_GPIO_BASE;
1070 unsigned int gpio_idx = get_gpio_index(gpio);
1071 struct gpio_bank *bank = get_irq_chip_data(irq);
1072
1073 _set_gpio_irqenable(bank, gpio_idx, 1);
1074 }
1075
1076 static struct irq_chip gpio_irq_chip = {
1077 .name = "GPIO",
1078 .shutdown = gpio_irq_shutdown,
1079 .ack = gpio_ack_irq,
1080 .mask = gpio_mask_irq,
1081 .unmask = gpio_unmask_irq,
1082 .set_type = gpio_irq_type,
1083 .set_wake = gpio_wake_enable,
1084 };
1085
1086 /*---------------------------------------------------------------------*/
1087
1088 #ifdef CONFIG_ARCH_OMAP1
1089
1090 /* MPUIO uses the always-on 32k clock */
1091
1092 static void mpuio_ack_irq(unsigned int irq)
1093 {
1094 /* The ISR is reset automatically, so do nothing here. */
1095 }
1096
1097 static void mpuio_mask_irq(unsigned int irq)
1098 {
1099 unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
1100 struct gpio_bank *bank = get_irq_chip_data(irq);
1101
1102 _set_gpio_irqenable(bank, gpio, 0);
1103 }
1104
1105 static void mpuio_unmask_irq(unsigned int irq)
1106 {
1107 unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
1108 struct gpio_bank *bank = get_irq_chip_data(irq);
1109
1110 _set_gpio_irqenable(bank, gpio, 1);
1111 }
1112
1113 static struct irq_chip mpuio_irq_chip = {
1114 .name = "MPUIO",
1115 .ack = mpuio_ack_irq,
1116 .mask = mpuio_mask_irq,
1117 .unmask = mpuio_unmask_irq,
1118 .set_type = gpio_irq_type,
1119 #ifdef CONFIG_ARCH_OMAP16XX
1120 /* REVISIT: assuming only 16xx supports MPUIO wake events */
1121 .set_wake = gpio_wake_enable,
1122 #endif
1123 };
1124
1125
1126 #define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
1127
1128
1129 #ifdef CONFIG_ARCH_OMAP16XX
1130
1131 #include <linux/platform_device.h>
1132
1133 static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
1134 {
1135 struct gpio_bank *bank = platform_get_drvdata(pdev);
1136 void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
1137
1138 spin_lock(&bank->lock);
1139 bank->saved_wakeup = __raw_readl(mask_reg);
1140 __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
1141 spin_unlock(&bank->lock);
1142
1143 return 0;
1144 }
1145
1146 static int omap_mpuio_resume_early(struct platform_device *pdev)
1147 {
1148 struct gpio_bank *bank = platform_get_drvdata(pdev);
1149 void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
1150
1151 spin_lock(&bank->lock);
1152 __raw_writel(bank->saved_wakeup, mask_reg);
1153 spin_unlock(&bank->lock);
1154
1155 return 0;
1156 }
1157
1158 /* use platform_driver for this, now that there's no longer any
1159 * point to sys_device (other than not disturbing old code).
1160 */
1161 static struct platform_driver omap_mpuio_driver = {
1162 .suspend_late = omap_mpuio_suspend_late,
1163 .resume_early = omap_mpuio_resume_early,
1164 .driver = {
1165 .name = "mpuio",
1166 },
1167 };
1168
1169 static struct platform_device omap_mpuio_device = {
1170 .name = "mpuio",
1171 .id = -1,
1172 .dev = {
1173 .driver = &omap_mpuio_driver.driver,
1174 }
1175 /* could list the /proc/iomem resources */
1176 };
1177
1178 static inline void mpuio_init(void)
1179 {
1180 platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
1181
1182 if (platform_driver_register(&omap_mpuio_driver) == 0)
1183 (void) platform_device_register(&omap_mpuio_device);
1184 }
1185
1186 #else
1187 static inline void mpuio_init(void) {}
1188 #endif /* 16xx */
1189
1190 #else
1191
1192 extern struct irq_chip mpuio_irq_chip;
1193
1194 #define bank_is_mpuio(bank) 0
1195 static inline void mpuio_init(void) {}
1196
1197 #endif
1198
1199 /*---------------------------------------------------------------------*/
1200
1201 static int initialized;
1202 static struct clk * gpio_ick;
1203 static struct clk * gpio_fck;
1204
1205 #ifdef CONFIG_ARCH_OMAP2430
1206 static struct clk * gpio5_ick;
1207 static struct clk * gpio5_fck;
1208 #endif
1209
1210 static int __init _omap_gpio_init(void)
1211 {
1212 int i;
1213 struct gpio_bank *bank;
1214
1215 initialized = 1;
1216
1217 if (cpu_is_omap15xx()) {
1218 gpio_ick = clk_get(NULL, "arm_gpio_ck");
1219 if (IS_ERR(gpio_ick))
1220 printk("Could not get arm_gpio_ck\n");
1221 else
1222 clk_enable(gpio_ick);
1223 }
1224 if (cpu_is_omap24xx()) {
1225 gpio_ick = clk_get(NULL, "gpios_ick");
1226 if (IS_ERR(gpio_ick))
1227 printk("Could not get gpios_ick\n");
1228 else
1229 clk_enable(gpio_ick);
1230 gpio_fck = clk_get(NULL, "gpios_fck");
1231 if (IS_ERR(gpio_fck))
1232 printk("Could not get gpios_fck\n");
1233 else
1234 clk_enable(gpio_fck);
1235
1236 /*
1237 * On 2430 GPIO 5 uses CORE L4 ICLK
1238 */
1239 #ifdef CONFIG_ARCH_OMAP2430
1240 if (cpu_is_omap2430()) {
1241 gpio5_ick = clk_get(NULL, "gpio5_ick");
1242 if (IS_ERR(gpio5_ick))
1243 printk("Could not get gpio5_ick\n");
1244 else
1245 clk_enable(gpio5_ick);
1246 gpio5_fck = clk_get(NULL, "gpio5_fck");
1247 if (IS_ERR(gpio5_fck))
1248 printk("Could not get gpio5_fck\n");
1249 else
1250 clk_enable(gpio5_fck);
1251 }
1252 #endif
1253 }
1254
1255 #ifdef CONFIG_ARCH_OMAP15XX
1256 if (cpu_is_omap15xx()) {
1257 printk(KERN_INFO "OMAP1510 GPIO hardware\n");
1258 gpio_bank_count = 2;
1259 gpio_bank = gpio_bank_1510;
1260 }
1261 #endif
1262 #if defined(CONFIG_ARCH_OMAP16XX)
1263 if (cpu_is_omap16xx()) {
1264 u32 rev;
1265
1266 gpio_bank_count = 5;
1267 gpio_bank = gpio_bank_1610;
1268 rev = omap_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
1269 printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
1270 (rev >> 4) & 0x0f, rev & 0x0f);
1271 }
1272 #endif
1273 #ifdef CONFIG_ARCH_OMAP730
1274 if (cpu_is_omap730()) {
1275 printk(KERN_INFO "OMAP730 GPIO hardware\n");
1276 gpio_bank_count = 7;
1277 gpio_bank = gpio_bank_730;
1278 }
1279 #endif
1280
1281 #ifdef CONFIG_ARCH_OMAP24XX
1282 if (cpu_is_omap242x()) {
1283 int rev;
1284
1285 gpio_bank_count = 4;
1286 gpio_bank = gpio_bank_242x;
1287 rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
1288 printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
1289 (rev >> 4) & 0x0f, rev & 0x0f);
1290 }
1291 if (cpu_is_omap243x()) {
1292 int rev;
1293
1294 gpio_bank_count = 5;
1295 gpio_bank = gpio_bank_243x;
1296 rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
1297 printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
1298 (rev >> 4) & 0x0f, rev & 0x0f);
1299 }
1300 #endif
1301 for (i = 0; i < gpio_bank_count; i++) {
1302 int j, gpio_count = 16;
1303
1304 bank = &gpio_bank[i];
1305 bank->reserved_map = 0;
1306 bank->base = IO_ADDRESS(bank->base);
1307 spin_lock_init(&bank->lock);
1308 if (bank_is_mpuio(bank))
1309 omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
1310 #ifdef CONFIG_ARCH_OMAP15XX
1311 if (bank->method == METHOD_GPIO_1510) {
1312 __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
1313 __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
1314 }
1315 #endif
1316 #if defined(CONFIG_ARCH_OMAP16XX)
1317 if (bank->method == METHOD_GPIO_1610) {
1318 __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
1319 __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
1320 __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
1321 }
1322 #endif
1323 #ifdef CONFIG_ARCH_OMAP730
1324 if (bank->method == METHOD_GPIO_730) {
1325 __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
1326 __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
1327
1328 gpio_count = 32; /* 730 has 32-bit GPIOs */
1329 }
1330 #endif
1331 #ifdef CONFIG_ARCH_OMAP24XX
1332 if (bank->method == METHOD_GPIO_24XX) {
1333 static const u32 non_wakeup_gpios[] = {
1334 0xe203ffc0, 0x08700040
1335 };
1336
1337 __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
1338 __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
1339 __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
1340
1341 /* Initialize interface clock ungated, module enabled */
1342 __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
1343 if (i < ARRAY_SIZE(non_wakeup_gpios))
1344 bank->non_wakeup_gpios = non_wakeup_gpios[i];
1345 gpio_count = 32;
1346 }
1347 #endif
1348 for (j = bank->virtual_irq_start;
1349 j < bank->virtual_irq_start + gpio_count; j++) {
1350 set_irq_chip_data(j, bank);
1351 if (bank_is_mpuio(bank))
1352 set_irq_chip(j, &mpuio_irq_chip);
1353 else
1354 set_irq_chip(j, &gpio_irq_chip);
1355 set_irq_handler(j, handle_simple_irq);
1356 set_irq_flags(j, IRQF_VALID);
1357 }
1358 set_irq_chained_handler(bank->irq, gpio_irq_handler);
1359 set_irq_data(bank->irq, bank);
1360 }
1361
1362 /* Enable system clock for GPIO module.
1363 * The CAM_CLK_CTRL *is* really the right place. */
1364 if (cpu_is_omap16xx())
1365 omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
1366
1367 #ifdef CONFIG_ARCH_OMAP24XX
1368 /* Enable autoidle for the OCP interface */
1369 if (cpu_is_omap24xx())
1370 omap_writel(1 << 0, 0x48019010);
1371 #endif
1372
1373 return 0;
1374 }
1375
1376 #if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX)
1377 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
1378 {
1379 int i;
1380
1381 if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
1382 return 0;
1383
1384 for (i = 0; i < gpio_bank_count; i++) {
1385 struct gpio_bank *bank = &gpio_bank[i];
1386 void __iomem *wake_status;
1387 void __iomem *wake_clear;
1388 void __iomem *wake_set;
1389
1390 switch (bank->method) {
1391 #ifdef CONFIG_ARCH_OMAP16XX
1392 case METHOD_GPIO_1610:
1393 wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
1394 wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
1395 wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
1396 break;
1397 #endif
1398 #ifdef CONFIG_ARCH_OMAP24XX
1399 case METHOD_GPIO_24XX:
1400 wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
1401 wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
1402 wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
1403 break;
1404 #endif
1405 default:
1406 continue;
1407 }
1408
1409 spin_lock(&bank->lock);
1410 bank->saved_wakeup = __raw_readl(wake_status);
1411 __raw_writel(0xffffffff, wake_clear);
1412 __raw_writel(bank->suspend_wakeup, wake_set);
1413 spin_unlock(&bank->lock);
1414 }
1415
1416 return 0;
1417 }
1418
1419 static int omap_gpio_resume(struct sys_device *dev)
1420 {
1421 int i;
1422
1423 if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
1424 return 0;
1425
1426 for (i = 0; i < gpio_bank_count; i++) {
1427 struct gpio_bank *bank = &gpio_bank[i];
1428 void __iomem *wake_clear;
1429 void __iomem *wake_set;
1430
1431 switch (bank->method) {
1432 #ifdef CONFIG_ARCH_OMAP16XX
1433 case METHOD_GPIO_1610:
1434 wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
1435 wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
1436 break;
1437 #endif
1438 #ifdef CONFIG_ARCH_OMAP24XX
1439 case METHOD_GPIO_24XX:
1440 wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
1441 wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
1442 break;
1443 #endif
1444 default:
1445 continue;
1446 }
1447
1448 spin_lock(&bank->lock);
1449 __raw_writel(0xffffffff, wake_clear);
1450 __raw_writel(bank->saved_wakeup, wake_set);
1451 spin_unlock(&bank->lock);
1452 }
1453
1454 return 0;
1455 }
1456
1457 static struct sysdev_class omap_gpio_sysclass = {
1458 .name = "gpio",
1459 .suspend = omap_gpio_suspend,
1460 .resume = omap_gpio_resume,
1461 };
1462
1463 static struct sys_device omap_gpio_device = {
1464 .id = 0,
1465 .cls = &omap_gpio_sysclass,
1466 };
1467
1468 #endif
1469
1470 #ifdef CONFIG_ARCH_OMAP24XX
1471
1472 static int workaround_enabled;
1473
1474 void omap2_gpio_prepare_for_retention(void)
1475 {
1476 int i, c = 0;
1477
1478 /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
1479 * IRQs will be generated. See OMAP2420 Errata item 1.101. */
1480 for (i = 0; i < gpio_bank_count; i++) {
1481 struct gpio_bank *bank = &gpio_bank[i];
1482 u32 l1, l2;
1483
1484 if (!(bank->enabled_non_wakeup_gpios))
1485 continue;
1486 bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
1487 l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1488 l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
1489 bank->saved_fallingdetect = l1;
1490 bank->saved_risingdetect = l2;
1491 l1 &= ~bank->enabled_non_wakeup_gpios;
1492 l2 &= ~bank->enabled_non_wakeup_gpios;
1493 __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1494 __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
1495 c++;
1496 }
1497 if (!c) {
1498 workaround_enabled = 0;
1499 return;
1500 }
1501 workaround_enabled = 1;
1502 }
1503
1504 void omap2_gpio_resume_after_retention(void)
1505 {
1506 int i;
1507
1508 if (!workaround_enabled)
1509 return;
1510 for (i = 0; i < gpio_bank_count; i++) {
1511 struct gpio_bank *bank = &gpio_bank[i];
1512 u32 l;
1513
1514 if (!(bank->enabled_non_wakeup_gpios))
1515 continue;
1516 __raw_writel(bank->saved_fallingdetect,
1517 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
1518 __raw_writel(bank->saved_risingdetect,
1519 bank->base + OMAP24XX_GPIO_RISINGDETECT);
1520 /* Check if any of the non-wakeup interrupt GPIOs have changed
1521 * state. If so, generate an IRQ by software. This is
1522 * horribly racy, but it's the best we can do to work around
1523 * this silicon bug. */
1524 l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
1525 l ^= bank->saved_datain;
1526 l &= bank->non_wakeup_gpios;
1527 if (l) {
1528 u32 old0, old1;
1529
1530 old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1531 old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1532 __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1533 __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1534 __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
1535 __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
1536 }
1537 }
1538
1539 }
1540
1541 #endif
1542
1543 /*
1544 * This may get called early from board specific init
1545 * for boards that have interrupts routed via FPGA.
1546 */
1547 int __init omap_gpio_init(void)
1548 {
1549 if (!initialized)
1550 return _omap_gpio_init();
1551 else
1552 return 0;
1553 }
1554
1555 static int __init omap_gpio_sysinit(void)
1556 {
1557 int ret = 0;
1558
1559 if (!initialized)
1560 ret = _omap_gpio_init();
1561
1562 mpuio_init();
1563
1564 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX)
1565 if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
1566 if (ret == 0) {
1567 ret = sysdev_class_register(&omap_gpio_sysclass);
1568 if (ret == 0)
1569 ret = sysdev_register(&omap_gpio_device);
1570 }
1571 }
1572 #endif
1573
1574 return ret;
1575 }
1576
1577 EXPORT_SYMBOL(omap_request_gpio);
1578 EXPORT_SYMBOL(omap_free_gpio);
1579 EXPORT_SYMBOL(omap_set_gpio_direction);
1580 EXPORT_SYMBOL(omap_set_gpio_dataout);
1581 EXPORT_SYMBOL(omap_get_gpio_datain);
1582
1583 arch_initcall(omap_gpio_sysinit);
1584
1585
1586 #ifdef CONFIG_DEBUG_FS
1587
1588 #include <linux/debugfs.h>
1589 #include <linux/seq_file.h>
1590
1591 static int gpio_is_input(struct gpio_bank *bank, int mask)
1592 {
1593 void __iomem *reg = bank->base;
1594
1595 switch (bank->method) {
1596 case METHOD_MPUIO:
1597 reg += OMAP_MPUIO_IO_CNTL;
1598 break;
1599 case METHOD_GPIO_1510:
1600 reg += OMAP1510_GPIO_DIR_CONTROL;
1601 break;
1602 case METHOD_GPIO_1610:
1603 reg += OMAP1610_GPIO_DIRECTION;
1604 break;
1605 case METHOD_GPIO_730:
1606 reg += OMAP730_GPIO_DIR_CONTROL;
1607 break;
1608 case METHOD_GPIO_24XX:
1609 reg += OMAP24XX_GPIO_OE;
1610 break;
1611 }
1612 return __raw_readl(reg) & mask;
1613 }
1614
1615
1616 static int dbg_gpio_show(struct seq_file *s, void *unused)
1617 {
1618 unsigned i, j, gpio;
1619
1620 for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
1621 struct gpio_bank *bank = gpio_bank + i;
1622 unsigned bankwidth = 16;
1623 u32 mask = 1;
1624
1625 if (bank_is_mpuio(bank))
1626 gpio = OMAP_MPUIO(0);
1627 else if (cpu_is_omap24xx() || cpu_is_omap730())
1628 bankwidth = 32;
1629
1630 for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
1631 unsigned irq, value, is_in, irqstat;
1632
1633 if (!(bank->reserved_map & mask))
1634 continue;
1635
1636 irq = bank->virtual_irq_start + j;
1637 value = omap_get_gpio_datain(gpio);
1638 is_in = gpio_is_input(bank, mask);
1639
1640 if (bank_is_mpuio(bank))
1641 seq_printf(s, "MPUIO %2d: ", j);
1642 else
1643 seq_printf(s, "GPIO %3d: ", gpio);
1644 seq_printf(s, "%s %s",
1645 is_in ? "in " : "out",
1646 value ? "hi" : "lo");
1647
1648 irqstat = irq_desc[irq].status;
1649 if (is_in && ((bank->suspend_wakeup & mask)
1650 || irqstat & IRQ_TYPE_SENSE_MASK)) {
1651 char *trigger = NULL;
1652
1653 switch (irqstat & IRQ_TYPE_SENSE_MASK) {
1654 case IRQ_TYPE_EDGE_FALLING:
1655 trigger = "falling";
1656 break;
1657 case IRQ_TYPE_EDGE_RISING:
1658 trigger = "rising";
1659 break;
1660 case IRQ_TYPE_EDGE_BOTH:
1661 trigger = "bothedge";
1662 break;
1663 case IRQ_TYPE_LEVEL_LOW:
1664 trigger = "low";
1665 break;
1666 case IRQ_TYPE_LEVEL_HIGH:
1667 trigger = "high";
1668 break;
1669 case IRQ_TYPE_NONE:
1670 trigger = "(unspecified)";
1671 break;
1672 }
1673 seq_printf(s, ", irq-%d %s%s",
1674 irq, trigger,
1675 (bank->suspend_wakeup & mask)
1676 ? " wakeup" : "");
1677 }
1678 seq_printf(s, "\n");
1679 }
1680
1681 if (bank_is_mpuio(bank)) {
1682 seq_printf(s, "\n");
1683 gpio = 0;
1684 }
1685 }
1686 return 0;
1687 }
1688
1689 static int dbg_gpio_open(struct inode *inode, struct file *file)
1690 {
1691 return single_open(file, dbg_gpio_show, &inode->i_private);
1692 }
1693
1694 static const struct file_operations debug_fops = {
1695 .open = dbg_gpio_open,
1696 .read = seq_read,
1697 .llseek = seq_lseek,
1698 .release = single_release,
1699 };
1700
1701 static int __init omap_gpio_debuginit(void)
1702 {
1703 (void) debugfs_create_file("omap_gpio", S_IRUGO,
1704 NULL, NULL, &debug_fops);
1705 return 0;
1706 }
1707 late_initcall(omap_gpio_debuginit);
1708 #endif
WandBoard kernel