| blob | 181bff00516784e3b4bc0c8a7f2b94ed47b76e70 |
1 The following is a list of files and features that are going to be
2 removed in the kernel source tree. Every entry should contain what
3 exactly is going away, why it is happening, and who is going to be doing
4 the work. When the feature is removed from the kernel, it should also
5 be removed from this file.
7 ---------------------------
9 What: MXSER
10 When: December 2007
11 Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
12 and remove it.
13 Who: Jiri Slaby <jirislaby@gmail.com>
15 ---------------------------
17 What: dev->power.power_state
18 When: July 2007
19 Why: Broken design for runtime control over driver power states, confusing
20 driver-internal runtime power management with: mechanisms to support
21 system-wide sleep state transitions; event codes that distinguish
22 different phases of swsusp "sleep" transitions; and userspace policy
23 inputs. This framework was never widely used, and most attempts to
24 use it were broken. Drivers should instead be exposing domain-specific
25 interfaces either to kernel or to userspace.
26 Who: Pavel Machek <pavel@suse.cz>
28 ---------------------------
30 What: old NCR53C9x driver
31 When: October 2007
32 Why: Replaced by the much better esp_scsi driver. Actual low-level
33 driver can be ported over almost trivially.
34 Who: David Miller <davem@davemloft.net>
35 Christoph Hellwig <hch@lst.de>
37 ---------------------------
39 What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
40 When: December 2008
41 Files: include/linux/video_decoder.h include/linux/videodev.h
42 Check: include/linux/video_decoder.h include/linux/videodev.h
43 Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
44 series. The old API have lots of drawbacks and don't provide enough
45 means to work with all video and audio standards. The newer API is
46 already available on the main drivers and should be used instead.
47 Newer drivers should use v4l_compat_translate_ioctl function to handle
48 old calls, replacing to newer ones.
49 Decoder iocts are using internally to allow video drivers to
50 communicate with video decoders. This should also be improved to allow
51 V4L2 calls being translated into compatible internal ioctls.
52 Compatibility ioctls will be provided, for a while, via
53 v4l1-compat module.
54 Who: Mauro Carvalho Chehab <mchehab@infradead.org>
56 ---------------------------
58 What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
59 When: November 2005
60 Files: drivers/pcmcia/: pcmcia_ioctl.c
61 Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
62 normal hotpluggable bus, and with it using the default kernel
63 infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
64 control ioctl needed by cardmgr and cardctl from pcmcia-cs is
65 unnecessary, and makes further cleanups and integration of the
66 PCMCIA subsystem into the Linux kernel device driver model more
67 difficult. The features provided by cardmgr and cardctl are either
68 handled by the kernel itself now or are available in the new
69 pcmciautils package available at
70 http://kernel.org/pub/linux/utils/kernel/pcmcia/
71 Who: Dominik Brodowski <linux@brodo.de>
73 ---------------------------
75 What: sys_sysctl
76 When: September 2010
77 Option: CONFIG_SYSCTL_SYSCALL
78 Why: The same information is available in a more convenient from
79 /proc/sys, and none of the sysctl variables appear to be
80 important performance wise.
82 Binary sysctls are a long standing source of subtle kernel
83 bugs and security issues.
85 When I looked several months ago all I could find after
86 searching several distributions were 5 user space programs and
87 glibc (which falls back to /proc/sys) using this syscall.
89 The man page for sysctl(2) documents it as unusable for user
90 space programs.
92 sysctl(2) is not generally ABI compatible to a 32bit user
93 space application on a 64bit and a 32bit kernel.
95 For the last several months the policy has been no new binary
96 sysctls and no one has put forward an argument to use them.
98 Binary sysctls issues seem to keep happening appearing so
99 properly deprecating them (with a warning to user space) and a
100 2 year grace warning period will mean eventually we can kill
101 them and end the pain.
103 In the mean time individual binary sysctls can be dealt with
104 in a piecewise fashion.
106 Who: Eric Biederman <ebiederm@xmission.com>
108 ---------------------------
110 What: a.out interpreter support for ELF executables
111 When: 2.6.25
112 Files: fs/binfmt_elf.c
113 Why: Using a.out interpreters for ELF executables was a feature for
114 transition from a.out to ELF. But now it is unlikely to be still
115 needed anymore and removing it would simplify the hairy ELF
116 loader code.
117 Who: Andi Kleen <ak@suse.de>
119 ---------------------------
121 What: remove EXPORT_SYMBOL(kernel_thread)
122 When: August 2006
123 Files: arch/*/kernel/*_ksyms.c
124 Check: kernel_thread
125 Why: kernel_thread is a low-level implementation detail. Drivers should
126 use the <linux/kthread.h> API instead which shields them from
127 implementation details and provides a higherlevel interface that
128 prevents bugs and code duplication
129 Who: Christoph Hellwig <hch@lst.de>
131 ---------------------------
133 What: CONFIG_FORCED_INLINING
134 When: June 2006
135 Why: Config option is there to see if gcc is good enough. (in january
136 2006). If it is, the behavior should just be the default. If it's not,
137 the option should just go away entirely.
138 Who: Arjan van de Ven
140 ---------------------------
142 What: eepro100 network driver
143 When: January 2007
144 Why: replaced by the e100 driver
145 Who: Adrian Bunk <bunk@stusta.de>
147 ---------------------------
149 What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
150 (temporary transition config option provided until then)
151 The transition config option will also be removed at the same time.
152 When: before 2.6.19
153 Why: Unused symbols are both increasing the size of the kernel binary
154 and are often a sign of "wrong API"
155 Who: Arjan van de Ven <arjan@linux.intel.com>
157 ---------------------------
159 What: USB driver API moves to EXPORT_SYMBOL_GPL
160 When: February 2008
161 Files: include/linux/usb.h, drivers/usb/core/driver.c
162 Why: The USB subsystem has changed a lot over time, and it has been
163 possible to create userspace USB drivers using usbfs/libusb/gadgetfs
164 that operate as fast as the USB bus allows. Because of this, the USB
165 subsystem will not be allowing closed source kernel drivers to
166 register with it, after this grace period is over. If anyone needs
167 any help in converting their closed source drivers over to use the
168 userspace filesystems, please contact the
169 linux-usb-devel@lists.sourceforge.net mailing list, and the developers
170 there will be glad to help you out.
171 Who: Greg Kroah-Hartman <gregkh@suse.de>
173 ---------------------------
175 What: vm_ops.nopage
176 When: Soon, provided in-kernel callers have been converted
177 Why: This interface is replaced by vm_ops.fault, but it has been around
178 forever, is used by a lot of drivers, and doesn't cost much to
179 maintain.
180 Who: Nick Piggin <npiggin@suse.de>
182 ---------------------------
184 What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
185 When: October 2008
186 Why: The stacking of class devices makes these values misleading and
187 inconsistent.
188 Class devices should not carry any of these properties, and bus
189 devices have SUBSYTEM and DRIVER as a replacement.
190 Who: Kay Sievers <kay.sievers@suse.de>
192 ---------------------------
194 What: ACPI procfs interface
195 When: July 2008
196 Why: ACPI sysfs conversion should be finished by January 2008.
197 ACPI procfs interface will be removed in July 2008 so that
198 there is enough time for the user space to catch up.
199 Who: Zhang Rui <rui.zhang@intel.com>
201 ---------------------------
203 What: /proc/acpi/button
204 When: August 2007
205 Why: /proc/acpi/button has been replaced by events to the input layer
206 since 2.6.20.
207 Who: Len Brown <len.brown@intel.com>
209 ---------------------------
211 What: /proc/acpi/event
212 When: February 2008
213 Why: /proc/acpi/event has been replaced by events via the input layer
214 and netlink since 2.6.23.
215 Who: Len Brown <len.brown@intel.com>
217 ---------------------------
219 What: 'time' kernel boot parameter
220 When: January 2008
221 Why: replaced by 'printk.time=<value>' so that printk timestamps can be
222 enabled or disabled as needed
223 Who: Randy Dunlap <randy.dunlap@oracle.com>
225 ---------------------------
227 What: drivers depending on OSS_OBSOLETE
228 When: options in 2.6.23, code in 2.6.25
229 Why: obsolete OSS drivers
230 Who: Adrian Bunk <bunk@stusta.de>
232 ---------------------------
234 What: libata spindown skipping and warning
235 When: Dec 2008
236 Why: Some halt(8) implementations synchronize caches for and spin
237 down libata disks because libata didn't use to spin down disk on
238 system halt (only synchronized caches).
239 Spin down on system halt is now implemented. sysfs node
240 /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
241 spin down support is available.
242 Because issuing spin down command to an already spun down disk
243 makes some disks spin up just to spin down again, libata tracks
244 device spindown status to skip the extra spindown command and
245 warn about it.
246 This is to give userspace tools the time to get updated and will
247 be removed after userspace is reasonably updated.
248 Who: Tejun Heo <htejun@gmail.com>
250 ---------------------------
252 What: The arch/ppc and include/asm-ppc directories
253 When: Jun 2008
254 Why: The arch/powerpc tree is the merged architecture for ppc32 and ppc64
255 platforms. Currently there are efforts underway to port the remaining
256 arch/ppc platforms to the merged tree. New submissions to the arch/ppc
257 tree have been frozen with the 2.6.22 kernel release and that tree will
258 remain in bug-fix only mode until its scheduled removal. Platforms
259 that are not ported by June 2008 will be removed due to the lack of an
260 interested maintainer.
261 Who: linuxppc-dev@ozlabs.org
263 ---------------------------
265 What: sk98lin network driver
266 When: Feburary 2008
267 Why: In kernel tree version of driver is unmaintained. Sk98lin driver
268 replaced by the skge driver.
269 Who: Stephen Hemminger <shemminger@linux-foundation.org>
271 ---------------------------
273 What: i386/x86_64 bzImage symlinks
274 When: April 2008
276 Why: The i386/x86_64 merge provides a symlink to the old bzImage
277 location so not yet updated user space tools, e.g. package
278 scripts, do not break.
279 Who: Thomas Gleixner <tglx@linutronix.de>
281 ---------------------------
283 ---------------------------
285 What: i2c-i810, i2c-prosavage and i2c-savage4
286 When: May 2008
287 Why: These drivers are superseded by i810fb, intelfb and savagefb.
288 Who: Jean Delvare <khali@linux-fr.org>
290 ---------------------------
292 What: bcm43xx wireless network driver
293 When: 2.6.26
294 Files: drivers/net/wireless/bcm43xx
295 Why: This driver's functionality has been replaced by the
296 mac80211-based b43 and b43legacy drivers.
297 Who: John W. Linville <linville@tuxdriver.com>
299 ---------------------------
301 What: ieee80211 softmac wireless networking component
302 When: 2.6.26 (or after removal of bcm43xx and port of zd1211rw to mac80211)
303 Files: net/ieee80211/softmac
304 Why: No in-kernel drivers will depend on it any longer.
305 Who: John W. Linville <linville@tuxdriver.com>
307 ---------------------------
309 What: rc80211-simple rate control algorithm for mac80211
310 When: 2.6.26
311 Files: net/mac80211/rc80211-simple.c
312 Why: This algorithm was provided for reference but always exhibited bad
313 responsiveness and performance and has some serious flaws. It has been
314 replaced by rc80211-pid.
315 Who: Stefano Brivio <stefano.brivio@polimi.it>
317 ---------------------------
319 What (Why):
320 - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
321 (superseded by xt_TOS/xt_tos target & match)
323 - "forwarding" header files like ipt_mac.h in
324 include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
326 - xt_CONNMARK match revision 0
327 (superseded by xt_CONNMARK match revision 1)
329 - xt_MARK target revisions 0 and 1
330 (superseded by xt_MARK match revision 2)
332 - xt_connmark match revision 0
333 (superseded by xt_connmark match revision 1)
335 - xt_conntrack match revision 0
336 (superseded by xt_conntrack match revision 1)
338 - xt_iprange match revision 0,
339 include/linux/netfilter_ipv4/ipt_iprange.h
340 (superseded by xt_iprange match revision 1)
342 - xt_mark match revision 0
343 (superseded by xt_mark match revision 1)
345 When: January 2009 or Linux 2.7.0, whichever comes first
346 Why: Superseded by newer revisions or modules
347 Who: Jan Engelhardt <jengelh@computergmbh.de>
349 ---------------------------
351 What: b43 support for firmware revision < 410
352 When: July 2008
353 Why: The support code for the old firmware hurts code readability/maintainability
354 and slightly hurts runtime performance. Bugfixes for the old firmware
355 are not provided by Broadcom anymore.
356 Who: Michael Buesch <mb@bu3sch.de>