Revert "HID: Invert HWHEEL mappings for some Logitech mice"
[wandboard.git] / net / netlabel / netlabel_cipso_v4.h
blobc8a4079261f04a88147695554865bab3765ce3bd
1 /*
2 * NetLabel CIPSO/IPv4 Support
4 * This file defines the CIPSO/IPv4 functions for the NetLabel system. The
5 * NetLabel system manages static and dynamic label mappings for network
6 * protocols such as CIPSO and RIPSO.
8 * Author: Paul Moore <paul.moore@hp.com>
13 * (c) Copyright Hewlett-Packard Development Company, L.P., 2006
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
23 * the GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
31 #ifndef _NETLABEL_CIPSO_V4
32 #define _NETLABEL_CIPSO_V4
34 #include <net/netlabel.h>
37 * The following NetLabel payloads are supported by the CIPSO subsystem.
39 * o ADD:
40 * Sent by an application to add a new DOI mapping table.
42 * Required attributes:
44 * NLBL_CIPSOV4_A_DOI
45 * NLBL_CIPSOV4_A_MTYPE
46 * NLBL_CIPSOV4_A_TAGLST
48 * If using CIPSO_V4_MAP_TRANS the following attributes are required:
50 * NLBL_CIPSOV4_A_MLSLVLLST
51 * NLBL_CIPSOV4_A_MLSCATLST
53 * If using CIPSO_V4_MAP_PASS or CIPSO_V4_MAP_LOCAL no additional attributes
54 * are required.
56 * o REMOVE:
57 * Sent by an application to remove a specific DOI mapping table from the
58 * CIPSO V4 system.
60 * Required attributes:
62 * NLBL_CIPSOV4_A_DOI
64 * o LIST:
65 * Sent by an application to list the details of a DOI definition. On
66 * success the kernel should send a response using the following format.
68 * Required attributes:
70 * NLBL_CIPSOV4_A_DOI
72 * The valid response message format depends on the type of the DOI mapping,
73 * the defined formats are shown below.
75 * Required attributes:
77 * NLBL_CIPSOV4_A_MTYPE
78 * NLBL_CIPSOV4_A_TAGLST
80 * If using CIPSO_V4_MAP_TRANS the following attributes are required:
82 * NLBL_CIPSOV4_A_MLSLVLLST
83 * NLBL_CIPSOV4_A_MLSCATLST
85 * If using CIPSO_V4_MAP_PASS or CIPSO_V4_MAP_LOCAL no additional attributes
86 * are required.
88 * o LISTALL:
89 * This message is sent by an application to list the valid DOIs on the
90 * system. When sent by an application there is no payload and the
91 * NLM_F_DUMP flag should be set. The kernel should respond with a series of
92 * the following messages.
94 * Required attributes:
96 * NLBL_CIPSOV4_A_DOI
97 * NLBL_CIPSOV4_A_MTYPE
101 /* NetLabel CIPSOv4 commands */
102 enum {
103 NLBL_CIPSOV4_C_UNSPEC,
104 NLBL_CIPSOV4_C_ADD,
105 NLBL_CIPSOV4_C_REMOVE,
106 NLBL_CIPSOV4_C_LIST,
107 NLBL_CIPSOV4_C_LISTALL,
108 __NLBL_CIPSOV4_C_MAX,
110 #define NLBL_CIPSOV4_C_MAX (__NLBL_CIPSOV4_C_MAX - 1)
112 /* NetLabel CIPSOv4 attributes */
113 enum {
114 NLBL_CIPSOV4_A_UNSPEC,
115 NLBL_CIPSOV4_A_DOI,
116 /* (NLA_U32)
117 * the DOI value */
118 NLBL_CIPSOV4_A_MTYPE,
119 /* (NLA_U32)
120 * the mapping table type (defined in the cipso_ipv4.h header as
121 * CIPSO_V4_MAP_*) */
122 NLBL_CIPSOV4_A_TAG,
123 /* (NLA_U8)
124 * a CIPSO tag type, meant to be used within a NLBL_CIPSOV4_A_TAGLST
125 * attribute */
126 NLBL_CIPSOV4_A_TAGLST,
127 /* (NLA_NESTED)
128 * the CIPSO tag list for the DOI, there must be at least one
129 * NLBL_CIPSOV4_A_TAG attribute, tags listed first are given higher
130 * priorirty when sending packets */
131 NLBL_CIPSOV4_A_MLSLVLLOC,
132 /* (NLA_U32)
133 * the local MLS sensitivity level */
134 NLBL_CIPSOV4_A_MLSLVLREM,
135 /* (NLA_U32)
136 * the remote MLS sensitivity level */
137 NLBL_CIPSOV4_A_MLSLVL,
138 /* (NLA_NESTED)
139 * a MLS sensitivity level mapping, must contain only one attribute of
140 * each of the following types: NLBL_CIPSOV4_A_MLSLVLLOC and
141 * NLBL_CIPSOV4_A_MLSLVLREM */
142 NLBL_CIPSOV4_A_MLSLVLLST,
143 /* (NLA_NESTED)
144 * the CIPSO level mappings, there must be at least one
145 * NLBL_CIPSOV4_A_MLSLVL attribute */
146 NLBL_CIPSOV4_A_MLSCATLOC,
147 /* (NLA_U32)
148 * the local MLS category */
149 NLBL_CIPSOV4_A_MLSCATREM,
150 /* (NLA_U32)
151 * the remote MLS category */
152 NLBL_CIPSOV4_A_MLSCAT,
153 /* (NLA_NESTED)
154 * a MLS category mapping, must contain only one attribute of each of
155 * the following types: NLBL_CIPSOV4_A_MLSCATLOC and
156 * NLBL_CIPSOV4_A_MLSCATREM */
157 NLBL_CIPSOV4_A_MLSCATLST,
158 /* (NLA_NESTED)
159 * the CIPSO category mappings, there must be at least one
160 * NLBL_CIPSOV4_A_MLSCAT attribute */
161 __NLBL_CIPSOV4_A_MAX,
163 #define NLBL_CIPSOV4_A_MAX (__NLBL_CIPSOV4_A_MAX - 1)
165 /* NetLabel protocol functions */
166 int netlbl_cipsov4_genl_init(void);
168 /* Free the memory associated with a CIPSOv4 DOI definition */
169 void netlbl_cipsov4_doi_free(struct rcu_head *entry);
171 #endif