[PATCH] dquot: add proper locking when using current->signal->tty
[usb.git] / include / linux / fsl_devices.h
blob16fbe59edeb1853958afacdfee91981195adf124
1 /*
2 * include/linux/fsl_devices.h
4 * Definitions for any platform device related flags or structures for
5 * Freescale processor devices
7 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
9 * Copyright 2004 Freescale Semiconductor, Inc
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
17 #ifdef __KERNEL__
18 #ifndef _FSL_DEVICE_H_
19 #define _FSL_DEVICE_H_
21 #include <linux/types.h>
24 * Some conventions on how we handle peripherals on Freescale chips
26 * unique device: a platform_device entry in fsl_plat_devs[] plus
27 * associated device information in its platform_data structure.
29 * A chip is described by a set of unique devices.
31 * Each sub-arch has its own master list of unique devices and
32 * enumerates them by enum fsl_devices in a sub-arch specific header
34 * The platform data structure is broken into two parts. The
35 * first is device specific information that help identify any
36 * unique features of a peripheral. The second is any
37 * information that may be defined by the board or how the device
38 * is connected externally of the chip.
40 * naming conventions:
41 * - platform data structures: <driver>_platform_data
42 * - platform data device flags: FSL_<driver>_DEV_<FLAG>
43 * - platform data board flags: FSL_<driver>_BRD_<FLAG>
47 struct gianfar_platform_data {
48 /* device specific information */
49 u32 device_flags;
51 /* board specific information */
52 u32 board_flags;
53 u32 bus_id;
54 u32 phy_id;
55 u8 mac_addr[6];
58 struct gianfar_mdio_data {
59 /* board specific information */
60 int irq[32];
63 /* Flags related to gianfar device features */
64 #define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001
65 #define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002
66 #define FSL_GIANFAR_DEV_HAS_RMON 0x00000004
67 #define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008
68 #define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010
69 #define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020
70 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040
71 #define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080
73 /* Flags in gianfar_platform_data */
74 #define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
75 #define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
77 struct fsl_i2c_platform_data {
78 /* device specific information */
79 u32 device_flags;
82 /* Flags related to I2C device features */
83 #define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
84 #define FSL_I2C_DEV_CLOCK_5200 0x00000002
87 enum fsl_usb2_operating_modes {
88 FSL_USB2_MPH_HOST,
89 FSL_USB2_DR_HOST,
90 FSL_USB2_DR_DEVICE,
91 FSL_USB2_DR_OTG,
94 enum fsl_usb2_phy_modes {
95 FSL_USB2_PHY_NONE,
96 FSL_USB2_PHY_ULPI,
97 FSL_USB2_PHY_UTMI,
98 FSL_USB2_PHY_UTMI_WIDE,
99 FSL_USB2_PHY_SERIAL,
102 struct fsl_usb2_platform_data {
103 /* board specific information */
104 enum fsl_usb2_operating_modes operating_mode;
105 enum fsl_usb2_phy_modes phy_mode;
106 unsigned int port_enables;
109 /* Flags in fsl_usb2_mph_platform_data */
110 #define FSL_USB2_PORT0_ENABLED 0x00000001
111 #define FSL_USB2_PORT1_ENABLED 0x00000002
113 struct fsl_spi_platform_data {
114 u32 initial_spmode; /* initial SPMODE value */
115 u16 bus_num;
117 /* board specific information */
118 u16 max_chipselect;
119 void (*activate_cs)(u8 cs, u8 polarity);
120 void (*deactivate_cs)(u8 cs, u8 polarity);
121 u32 sysclk;
124 #endif /* _FSL_DEVICE_H_ */
125 #endif /* __KERNEL__ */