[PATCH] x86: Fix boot hang due to nmi watchdog init code
[usb.git] / arch / x86_64 / kernel / nmi.c
blob186aebbae32d25414b076bb53762ac31de6c5c6e
1 /*
2 * linux/arch/x86_64/nmi.c
4 * NMI watchdog support on APIC systems
6 * Started by Ingo Molnar <mingo@redhat.com>
8 * Fixes:
9 * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
10 * Mikael Pettersson : Power Management for local APIC NMI watchdog.
11 * Pavel Machek and
12 * Mikael Pettersson : PM converted to driver model. Disable/enable API.
15 #include <linux/nmi.h>
16 #include <linux/mm.h>
17 #include <linux/delay.h>
18 #include <linux/interrupt.h>
19 #include <linux/module.h>
20 #include <linux/sysdev.h>
21 #include <linux/sysctl.h>
22 #include <linux/kprobes.h>
23 #include <linux/cpumask.h>
25 #include <asm/smp.h>
26 #include <asm/nmi.h>
27 #include <asm/proto.h>
28 #include <asm/kdebug.h>
29 #include <asm/mce.h>
30 #include <asm/intel_arch_perfmon.h>
32 int unknown_nmi_panic;
33 int nmi_watchdog_enabled;
34 int panic_on_unrecovered_nmi;
36 /* perfctr_nmi_owner tracks the ownership of the perfctr registers:
37 * evtsel_nmi_owner tracks the ownership of the event selection
38 * - different performance counters/ event selection may be reserved for
39 * different subsystems this reservation system just tries to coordinate
40 * things a little
42 static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner);
43 static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]);
45 static cpumask_t backtrace_mask = CPU_MASK_NONE;
47 /* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
48 * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
50 #define NMI_MAX_COUNTER_BITS 66
52 /* nmi_active:
53 * >0: the lapic NMI watchdog is active, but can be disabled
54 * <0: the lapic NMI watchdog has not been set up, and cannot
55 * be enabled
56 * 0: the lapic NMI watchdog is disabled, but can be enabled
58 atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
59 int panic_on_timeout;
61 unsigned int nmi_watchdog = NMI_DEFAULT;
62 static unsigned int nmi_hz = HZ;
64 struct nmi_watchdog_ctlblk {
65 int enabled;
66 u64 check_bit;
67 unsigned int cccr_msr;
68 unsigned int perfctr_msr; /* the MSR to reset in NMI handler */
69 unsigned int evntsel_msr; /* the MSR to select the events to handle */
71 static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
73 /* local prototypes */
74 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
76 /* converts an msr to an appropriate reservation bit */
77 static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
79 /* returns the bit offset of the performance counter register */
80 switch (boot_cpu_data.x86_vendor) {
81 case X86_VENDOR_AMD:
82 return (msr - MSR_K7_PERFCTR0);
83 case X86_VENDOR_INTEL:
84 if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
85 return (msr - MSR_ARCH_PERFMON_PERFCTR0);
86 else
87 return (msr - MSR_P4_BPU_PERFCTR0);
89 return 0;
92 /* converts an msr to an appropriate reservation bit */
93 static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
95 /* returns the bit offset of the event selection register */
96 switch (boot_cpu_data.x86_vendor) {
97 case X86_VENDOR_AMD:
98 return (msr - MSR_K7_EVNTSEL0);
99 case X86_VENDOR_INTEL:
100 if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
101 return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
102 else
103 return (msr - MSR_P4_BSU_ESCR0);
105 return 0;
108 /* checks for a bit availability (hack for oprofile) */
109 int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
111 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
113 return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
116 /* checks the an msr for availability */
117 int avail_to_resrv_perfctr_nmi(unsigned int msr)
119 unsigned int counter;
121 counter = nmi_perfctr_msr_to_bit(msr);
122 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
124 return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
127 int reserve_perfctr_nmi(unsigned int msr)
129 unsigned int counter;
131 counter = nmi_perfctr_msr_to_bit(msr);
132 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
134 if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
135 return 1;
136 return 0;
139 void release_perfctr_nmi(unsigned int msr)
141 unsigned int counter;
143 counter = nmi_perfctr_msr_to_bit(msr);
144 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
146 clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
149 int reserve_evntsel_nmi(unsigned int msr)
151 unsigned int counter;
153 counter = nmi_evntsel_msr_to_bit(msr);
154 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
156 if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)))
157 return 1;
158 return 0;
161 void release_evntsel_nmi(unsigned int msr)
163 unsigned int counter;
165 counter = nmi_evntsel_msr_to_bit(msr);
166 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
168 clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner));
171 static __cpuinit inline int nmi_known_cpu(void)
173 switch (boot_cpu_data.x86_vendor) {
174 case X86_VENDOR_AMD:
175 return boot_cpu_data.x86 == 15;
176 case X86_VENDOR_INTEL:
177 if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
178 return 1;
179 else
180 return (boot_cpu_data.x86 == 15);
182 return 0;
185 /* Run after command line and cpu_init init, but before all other checks */
186 void nmi_watchdog_default(void)
188 if (nmi_watchdog != NMI_DEFAULT)
189 return;
190 if (nmi_known_cpu())
191 nmi_watchdog = NMI_LOCAL_APIC;
192 else
193 nmi_watchdog = NMI_IO_APIC;
196 static int endflag __initdata = 0;
198 #ifdef CONFIG_SMP
199 /* The performance counters used by NMI_LOCAL_APIC don't trigger when
200 * the CPU is idle. To make sure the NMI watchdog really ticks on all
201 * CPUs during the test make them busy.
203 static __init void nmi_cpu_busy(void *data)
205 local_irq_enable_in_hardirq();
206 /* Intentionally don't use cpu_relax here. This is
207 to make sure that the performance counter really ticks,
208 even if there is a simulator or similar that catches the
209 pause instruction. On a real HT machine this is fine because
210 all other CPUs are busy with "useless" delay loops and don't
211 care if they get somewhat less cycles. */
212 while (endflag == 0)
213 mb();
215 #endif
217 int __init check_nmi_watchdog (void)
219 int *counts;
220 int cpu;
222 if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
223 return 0;
225 if (!atomic_read(&nmi_active))
226 return 0;
228 counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
229 if (!counts)
230 return -1;
232 printk(KERN_INFO "testing NMI watchdog ... ");
234 #ifdef CONFIG_SMP
235 if (nmi_watchdog == NMI_LOCAL_APIC)
236 smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
237 #endif
239 for (cpu = 0; cpu < NR_CPUS; cpu++)
240 counts[cpu] = cpu_pda(cpu)->__nmi_count;
241 local_irq_enable();
242 mdelay((10*1000)/nmi_hz); // wait 10 ticks
244 for_each_online_cpu(cpu) {
245 if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
246 continue;
247 if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
248 printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
249 cpu,
250 counts[cpu],
251 cpu_pda(cpu)->__nmi_count);
252 per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0;
253 atomic_dec(&nmi_active);
256 if (!atomic_read(&nmi_active)) {
257 kfree(counts);
258 atomic_set(&nmi_active, -1);
259 endflag = 1;
260 return -1;
262 endflag = 1;
263 printk("OK.\n");
265 /* now that we know it works we can reduce NMI frequency to
266 something more reasonable; makes a difference in some configs */
267 if (nmi_watchdog == NMI_LOCAL_APIC) {
268 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
270 nmi_hz = 1;
272 * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
273 * are writable, with higher bits sign extending from bit 31.
274 * So, we can only program the counter with 31 bit values and
275 * 32nd bit should be 1, for 33.. to be 1.
276 * Find the appropriate nmi_hz
278 if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 &&
279 ((u64)cpu_khz * 1000) > 0x7fffffffULL) {
280 nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1;
284 kfree(counts);
285 return 0;
288 int __init setup_nmi_watchdog(char *str)
290 int nmi;
292 if (!strncmp(str,"panic",5)) {
293 panic_on_timeout = 1;
294 str = strchr(str, ',');
295 if (!str)
296 return 1;
297 ++str;
300 get_option(&str, &nmi);
302 if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
303 return 0;
305 if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
306 return 0; /* no lapic support */
307 nmi_watchdog = nmi;
308 return 1;
311 __setup("nmi_watchdog=", setup_nmi_watchdog);
313 static void disable_lapic_nmi_watchdog(void)
315 BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
317 if (atomic_read(&nmi_active) <= 0)
318 return;
320 on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
322 BUG_ON(atomic_read(&nmi_active) != 0);
325 static void enable_lapic_nmi_watchdog(void)
327 BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
329 /* are we already enabled */
330 if (atomic_read(&nmi_active) != 0)
331 return;
333 /* are we lapic aware */
334 if (nmi_known_cpu() <= 0)
335 return;
337 on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
338 touch_nmi_watchdog();
341 void disable_timer_nmi_watchdog(void)
343 BUG_ON(nmi_watchdog != NMI_IO_APIC);
345 if (atomic_read(&nmi_active) <= 0)
346 return;
348 disable_irq(0);
349 on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
351 BUG_ON(atomic_read(&nmi_active) != 0);
354 void enable_timer_nmi_watchdog(void)
356 BUG_ON(nmi_watchdog != NMI_IO_APIC);
358 if (atomic_read(&nmi_active) == 0) {
359 touch_nmi_watchdog();
360 on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
361 enable_irq(0);
365 #ifdef CONFIG_PM
367 static int nmi_pm_active; /* nmi_active before suspend */
369 static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
371 /* only CPU0 goes here, other CPUs should be offline */
372 nmi_pm_active = atomic_read(&nmi_active);
373 stop_apic_nmi_watchdog(NULL);
374 BUG_ON(atomic_read(&nmi_active) != 0);
375 return 0;
378 static int lapic_nmi_resume(struct sys_device *dev)
380 /* only CPU0 goes here, other CPUs should be offline */
381 if (nmi_pm_active > 0) {
382 setup_apic_nmi_watchdog(NULL);
383 touch_nmi_watchdog();
385 return 0;
388 static struct sysdev_class nmi_sysclass = {
389 set_kset_name("lapic_nmi"),
390 .resume = lapic_nmi_resume,
391 .suspend = lapic_nmi_suspend,
394 static struct sys_device device_lapic_nmi = {
395 .id = 0,
396 .cls = &nmi_sysclass,
399 static int __init init_lapic_nmi_sysfs(void)
401 int error;
403 /* should really be a BUG_ON but b/c this is an
404 * init call, it just doesn't work. -dcz
406 if (nmi_watchdog != NMI_LOCAL_APIC)
407 return 0;
409 if ( atomic_read(&nmi_active) < 0 )
410 return 0;
412 error = sysdev_class_register(&nmi_sysclass);
413 if (!error)
414 error = sysdev_register(&device_lapic_nmi);
415 return error;
417 /* must come after the local APIC's device_initcall() */
418 late_initcall(init_lapic_nmi_sysfs);
420 #endif /* CONFIG_PM */
423 * Activate the NMI watchdog via the local APIC.
424 * Original code written by Keith Owens.
427 /* Note that these events don't tick when the CPU idles. This means
428 the frequency varies with CPU load. */
430 #define K7_EVNTSEL_ENABLE (1 << 22)
431 #define K7_EVNTSEL_INT (1 << 20)
432 #define K7_EVNTSEL_OS (1 << 17)
433 #define K7_EVNTSEL_USR (1 << 16)
434 #define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
435 #define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
437 static int setup_k7_watchdog(void)
439 unsigned int perfctr_msr, evntsel_msr;
440 unsigned int evntsel;
441 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
443 perfctr_msr = MSR_K7_PERFCTR0;
444 evntsel_msr = MSR_K7_EVNTSEL0;
445 if (!reserve_perfctr_nmi(perfctr_msr))
446 goto fail;
448 if (!reserve_evntsel_nmi(evntsel_msr))
449 goto fail1;
451 /* Simulator may not support it */
452 if (checking_wrmsrl(evntsel_msr, 0UL))
453 goto fail2;
454 wrmsrl(perfctr_msr, 0UL);
456 evntsel = K7_EVNTSEL_INT
457 | K7_EVNTSEL_OS
458 | K7_EVNTSEL_USR
459 | K7_NMI_EVENT;
461 /* setup the timer */
462 wrmsr(evntsel_msr, evntsel, 0);
463 wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
464 apic_write(APIC_LVTPC, APIC_DM_NMI);
465 evntsel |= K7_EVNTSEL_ENABLE;
466 wrmsr(evntsel_msr, evntsel, 0);
468 wd->perfctr_msr = perfctr_msr;
469 wd->evntsel_msr = evntsel_msr;
470 wd->cccr_msr = 0; //unused
471 wd->check_bit = 1ULL<<63;
472 return 1;
473 fail2:
474 release_evntsel_nmi(evntsel_msr);
475 fail1:
476 release_perfctr_nmi(perfctr_msr);
477 fail:
478 return 0;
481 static void stop_k7_watchdog(void)
483 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
485 wrmsr(wd->evntsel_msr, 0, 0);
487 release_evntsel_nmi(wd->evntsel_msr);
488 release_perfctr_nmi(wd->perfctr_msr);
491 /* Note that these events don't tick when the CPU idles. This means
492 the frequency varies with CPU load. */
494 #define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
495 #define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
496 #define P4_ESCR_OS (1<<3)
497 #define P4_ESCR_USR (1<<2)
498 #define P4_CCCR_OVF_PMI0 (1<<26)
499 #define P4_CCCR_OVF_PMI1 (1<<27)
500 #define P4_CCCR_THRESHOLD(N) ((N)<<20)
501 #define P4_CCCR_COMPLEMENT (1<<19)
502 #define P4_CCCR_COMPARE (1<<18)
503 #define P4_CCCR_REQUIRED (3<<16)
504 #define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
505 #define P4_CCCR_ENABLE (1<<12)
506 #define P4_CCCR_OVF (1<<31)
507 /* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
508 CRU_ESCR0 (with any non-null event selector) through a complemented
509 max threshold. [IA32-Vol3, Section 14.9.9] */
511 static int setup_p4_watchdog(void)
513 unsigned int perfctr_msr, evntsel_msr, cccr_msr;
514 unsigned int evntsel, cccr_val;
515 unsigned int misc_enable, dummy;
516 unsigned int ht_num;
517 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
519 rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
520 if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
521 return 0;
523 #ifdef CONFIG_SMP
524 /* detect which hyperthread we are on */
525 if (smp_num_siblings == 2) {
526 unsigned int ebx, apicid;
528 ebx = cpuid_ebx(1);
529 apicid = (ebx >> 24) & 0xff;
530 ht_num = apicid & 1;
531 } else
532 #endif
533 ht_num = 0;
535 /* performance counters are shared resources
536 * assign each hyperthread its own set
537 * (re-use the ESCR0 register, seems safe
538 * and keeps the cccr_val the same)
540 if (!ht_num) {
541 /* logical cpu 0 */
542 perfctr_msr = MSR_P4_IQ_PERFCTR0;
543 evntsel_msr = MSR_P4_CRU_ESCR0;
544 cccr_msr = MSR_P4_IQ_CCCR0;
545 cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
546 } else {
547 /* logical cpu 1 */
548 perfctr_msr = MSR_P4_IQ_PERFCTR1;
549 evntsel_msr = MSR_P4_CRU_ESCR0;
550 cccr_msr = MSR_P4_IQ_CCCR1;
551 cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
554 if (!reserve_perfctr_nmi(perfctr_msr))
555 goto fail;
557 if (!reserve_evntsel_nmi(evntsel_msr))
558 goto fail1;
560 evntsel = P4_ESCR_EVENT_SELECT(0x3F)
561 | P4_ESCR_OS
562 | P4_ESCR_USR;
564 cccr_val |= P4_CCCR_THRESHOLD(15)
565 | P4_CCCR_COMPLEMENT
566 | P4_CCCR_COMPARE
567 | P4_CCCR_REQUIRED;
569 wrmsr(evntsel_msr, evntsel, 0);
570 wrmsr(cccr_msr, cccr_val, 0);
571 wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
572 apic_write(APIC_LVTPC, APIC_DM_NMI);
573 cccr_val |= P4_CCCR_ENABLE;
574 wrmsr(cccr_msr, cccr_val, 0);
576 wd->perfctr_msr = perfctr_msr;
577 wd->evntsel_msr = evntsel_msr;
578 wd->cccr_msr = cccr_msr;
579 wd->check_bit = 1ULL<<39;
580 return 1;
581 fail1:
582 release_perfctr_nmi(perfctr_msr);
583 fail:
584 return 0;
587 static void stop_p4_watchdog(void)
589 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
591 wrmsr(wd->cccr_msr, 0, 0);
592 wrmsr(wd->evntsel_msr, 0, 0);
594 release_evntsel_nmi(wd->evntsel_msr);
595 release_perfctr_nmi(wd->perfctr_msr);
598 #define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
599 #define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
601 static int setup_intel_arch_watchdog(void)
603 unsigned int ebx;
604 union cpuid10_eax eax;
605 unsigned int unused;
606 unsigned int perfctr_msr, evntsel_msr;
607 unsigned int evntsel;
608 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
611 * Check whether the Architectural PerfMon supports
612 * Unhalted Core Cycles Event or not.
613 * NOTE: Corresponding bit = 0 in ebx indicates event present.
615 cpuid(10, &(eax.full), &ebx, &unused, &unused);
616 if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
617 (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
618 goto fail;
620 perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
621 evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
623 if (!reserve_perfctr_nmi(perfctr_msr))
624 goto fail;
626 if (!reserve_evntsel_nmi(evntsel_msr))
627 goto fail1;
629 wrmsrl(perfctr_msr, 0UL);
631 evntsel = ARCH_PERFMON_EVENTSEL_INT
632 | ARCH_PERFMON_EVENTSEL_OS
633 | ARCH_PERFMON_EVENTSEL_USR
634 | ARCH_PERFMON_NMI_EVENT_SEL
635 | ARCH_PERFMON_NMI_EVENT_UMASK;
637 /* setup the timer */
638 wrmsr(evntsel_msr, evntsel, 0);
639 wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
641 apic_write(APIC_LVTPC, APIC_DM_NMI);
642 evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
643 wrmsr(evntsel_msr, evntsel, 0);
645 wd->perfctr_msr = perfctr_msr;
646 wd->evntsel_msr = evntsel_msr;
647 wd->cccr_msr = 0; //unused
648 wd->check_bit = 1ULL << (eax.split.bit_width - 1);
649 return 1;
650 fail1:
651 release_perfctr_nmi(perfctr_msr);
652 fail:
653 return 0;
656 static void stop_intel_arch_watchdog(void)
658 unsigned int ebx;
659 union cpuid10_eax eax;
660 unsigned int unused;
661 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
664 * Check whether the Architectural PerfMon supports
665 * Unhalted Core Cycles Event or not.
666 * NOTE: Corresponding bit = 0 in ebx indicates event present.
668 cpuid(10, &(eax.full), &ebx, &unused, &unused);
669 if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
670 (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
671 return;
673 wrmsr(wd->evntsel_msr, 0, 0);
675 release_evntsel_nmi(wd->evntsel_msr);
676 release_perfctr_nmi(wd->perfctr_msr);
679 void setup_apic_nmi_watchdog(void *unused)
681 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
683 /* only support LOCAL and IO APICs for now */
684 if ((nmi_watchdog != NMI_LOCAL_APIC) &&
685 (nmi_watchdog != NMI_IO_APIC))
686 return;
688 if (wd->enabled == 1)
689 return;
691 /* cheap hack to support suspend/resume */
692 /* if cpu0 is not active neither should the other cpus */
693 if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
694 return;
696 if (nmi_watchdog == NMI_LOCAL_APIC) {
697 switch (boot_cpu_data.x86_vendor) {
698 case X86_VENDOR_AMD:
699 if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
700 return;
701 if (!setup_k7_watchdog())
702 return;
703 break;
704 case X86_VENDOR_INTEL:
705 if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
706 if (!setup_intel_arch_watchdog())
707 return;
708 break;
710 if (!setup_p4_watchdog())
711 return;
712 break;
713 default:
714 return;
717 wd->enabled = 1;
718 atomic_inc(&nmi_active);
721 void stop_apic_nmi_watchdog(void *unused)
723 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
725 /* only support LOCAL and IO APICs for now */
726 if ((nmi_watchdog != NMI_LOCAL_APIC) &&
727 (nmi_watchdog != NMI_IO_APIC))
728 return;
730 if (wd->enabled == 0)
731 return;
733 if (nmi_watchdog == NMI_LOCAL_APIC) {
734 switch (boot_cpu_data.x86_vendor) {
735 case X86_VENDOR_AMD:
736 if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
737 return;
738 stop_k7_watchdog();
739 break;
740 case X86_VENDOR_INTEL:
741 if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
742 stop_intel_arch_watchdog();
743 break;
745 stop_p4_watchdog();
746 break;
747 default:
748 return;
751 wd->enabled = 0;
752 atomic_dec(&nmi_active);
756 * the best way to detect whether a CPU has a 'hard lockup' problem
757 * is to check it's local APIC timer IRQ counts. If they are not
758 * changing then that CPU has some problem.
760 * as these watchdog NMI IRQs are generated on every CPU, we only
761 * have to check the current processor.
764 static DEFINE_PER_CPU(unsigned, last_irq_sum);
765 static DEFINE_PER_CPU(local_t, alert_counter);
766 static DEFINE_PER_CPU(int, nmi_touch);
768 void touch_nmi_watchdog (void)
770 if (nmi_watchdog > 0) {
771 unsigned cpu;
774 * Tell other CPUs to reset their alert counters. We cannot
775 * do it ourselves because the alert count increase is not
776 * atomic.
778 for_each_present_cpu (cpu)
779 per_cpu(nmi_touch, cpu) = 1;
782 touch_softlockup_watchdog();
785 int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
787 int sum;
788 int touched = 0;
789 int cpu = smp_processor_id();
790 struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
791 u64 dummy;
792 int rc=0;
794 /* check for other users first */
795 if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
796 == NOTIFY_STOP) {
797 rc = 1;
798 touched = 1;
801 sum = read_pda(apic_timer_irqs);
802 if (__get_cpu_var(nmi_touch)) {
803 __get_cpu_var(nmi_touch) = 0;
804 touched = 1;
807 if (cpu_isset(cpu, backtrace_mask)) {
808 static DEFINE_SPINLOCK(lock); /* Serialise the printks */
810 spin_lock(&lock);
811 printk("NMI backtrace for cpu %d\n", cpu);
812 dump_stack();
813 spin_unlock(&lock);
814 cpu_clear(cpu, backtrace_mask);
817 #ifdef CONFIG_X86_MCE
818 /* Could check oops_in_progress here too, but it's safer
819 not too */
820 if (atomic_read(&mce_entry) > 0)
821 touched = 1;
822 #endif
823 /* if the apic timer isn't firing, this cpu isn't doing much */
824 if (!touched && __get_cpu_var(last_irq_sum) == sum) {
826 * Ayiee, looks like this CPU is stuck ...
827 * wait a few IRQs (5 seconds) before doing the oops ...
829 local_inc(&__get_cpu_var(alert_counter));
830 if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
831 die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
832 panic_on_timeout);
833 } else {
834 __get_cpu_var(last_irq_sum) = sum;
835 local_set(&__get_cpu_var(alert_counter), 0);
838 /* see if the nmi watchdog went off */
839 if (wd->enabled) {
840 if (nmi_watchdog == NMI_LOCAL_APIC) {
841 rdmsrl(wd->perfctr_msr, dummy);
842 if (dummy & wd->check_bit){
843 /* this wasn't a watchdog timer interrupt */
844 goto done;
847 /* only Intel uses the cccr msr */
848 if (wd->cccr_msr != 0) {
850 * P4 quirks:
851 * - An overflown perfctr will assert its interrupt
852 * until the OVF flag in its CCCR is cleared.
853 * - LVTPC is masked on interrupt and must be
854 * unmasked by the LVTPC handler.
856 rdmsrl(wd->cccr_msr, dummy);
857 dummy &= ~P4_CCCR_OVF;
858 wrmsrl(wd->cccr_msr, dummy);
859 apic_write(APIC_LVTPC, APIC_DM_NMI);
860 } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
862 * ArchPerfom/Core Duo needs to re-unmask
863 * the apic vector
865 apic_write(APIC_LVTPC, APIC_DM_NMI);
867 /* start the cycle over again */
868 wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
869 rc = 1;
870 } else if (nmi_watchdog == NMI_IO_APIC) {
871 /* don't know how to accurately check for this.
872 * just assume it was a watchdog timer interrupt
873 * This matches the old behaviour.
875 rc = 1;
876 } else
877 printk(KERN_WARNING "Unknown enabled NMI hardware?!\n");
879 done:
880 return rc;
883 asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
885 nmi_enter();
886 add_pda(__nmi_count,1);
887 default_do_nmi(regs);
888 nmi_exit();
891 int do_nmi_callback(struct pt_regs * regs, int cpu)
893 #ifdef CONFIG_SYSCTL
894 if (unknown_nmi_panic)
895 return unknown_nmi_panic_callback(regs, cpu);
896 #endif
897 return 0;
900 #ifdef CONFIG_SYSCTL
902 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
904 unsigned char reason = get_nmi_reason();
905 char buf[64];
907 sprintf(buf, "NMI received for unknown reason %02x\n", reason);
908 die_nmi(buf, regs, 1); /* Always panic here */
909 return 0;
913 * proc handler for /proc/sys/kernel/nmi
915 int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
916 void __user *buffer, size_t *length, loff_t *ppos)
918 int old_state;
920 nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
921 old_state = nmi_watchdog_enabled;
922 proc_dointvec(table, write, file, buffer, length, ppos);
923 if (!!old_state == !!nmi_watchdog_enabled)
924 return 0;
926 if (atomic_read(&nmi_active) < 0) {
927 printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
928 return -EIO;
931 /* if nmi_watchdog is not set yet, then set it */
932 nmi_watchdog_default();
934 if (nmi_watchdog == NMI_LOCAL_APIC) {
935 if (nmi_watchdog_enabled)
936 enable_lapic_nmi_watchdog();
937 else
938 disable_lapic_nmi_watchdog();
939 } else {
940 printk( KERN_WARNING
941 "NMI watchdog doesn't know what hardware to touch\n");
942 return -EIO;
944 return 0;
947 #endif
949 void __trigger_all_cpu_backtrace(void)
951 int i;
953 backtrace_mask = cpu_online_map;
954 /* Wait for up to 10 seconds for all CPUs to do the backtrace */
955 for (i = 0; i < 10 * 1000; i++) {
956 if (cpus_empty(backtrace_mask))
957 break;
958 mdelay(1);
962 EXPORT_SYMBOL(nmi_active);
963 EXPORT_SYMBOL(nmi_watchdog);
964 EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi);
965 EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
966 EXPORT_SYMBOL(reserve_perfctr_nmi);
967 EXPORT_SYMBOL(release_perfctr_nmi);
968 EXPORT_SYMBOL(reserve_evntsel_nmi);
969 EXPORT_SYMBOL(release_evntsel_nmi);
970 EXPORT_SYMBOL(disable_timer_nmi_watchdog);
971 EXPORT_SYMBOL(enable_timer_nmi_watchdog);
972 EXPORT_SYMBOL(touch_nmi_watchdog);