[PATCH] kdump: introduce "reset_devices" command line option
[usb.git] / drivers / rtc / rtc-pcf8563.c
blobba9a583b7b6817ff073b4c70a5a93910fdc89fe0
1 /*
2 * An I2C driver for the Philips PCF8563 RTC
3 * Copyright 2005-06 Tower Technologies
5 * Author: Alessandro Zummo <a.zummo@towertech.it>
6 * Maintainers: http://www.nslu2-linux.org/
8 * based on the other drivers in this same directory.
10 * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
17 #include <linux/i2c.h>
18 #include <linux/bcd.h>
19 #include <linux/rtc.h>
21 #define DRV_VERSION "0.4.2"
23 /* Addresses to scan: none
24 * This chip cannot be reliably autodetected. An empty eeprom
25 * located at 0x51 will pass the validation routine due to
26 * the way the registers are implemented.
28 static unsigned short normal_i2c[] = { I2C_CLIENT_END };
30 /* Module parameters */
31 I2C_CLIENT_INSMOD;
33 #define PCF8563_REG_ST1 0x00 /* status */
34 #define PCF8563_REG_ST2 0x01
36 #define PCF8563_REG_SC 0x02 /* datetime */
37 #define PCF8563_REG_MN 0x03
38 #define PCF8563_REG_HR 0x04
39 #define PCF8563_REG_DM 0x05
40 #define PCF8563_REG_DW 0x06
41 #define PCF8563_REG_MO 0x07
42 #define PCF8563_REG_YR 0x08
44 #define PCF8563_REG_AMN 0x09 /* alarm */
45 #define PCF8563_REG_AHR 0x0A
46 #define PCF8563_REG_ADM 0x0B
47 #define PCF8563_REG_ADW 0x0C
49 #define PCF8563_REG_CLKO 0x0D /* clock out */
50 #define PCF8563_REG_TMRC 0x0E /* timer control */
51 #define PCF8563_REG_TMR 0x0F /* timer */
53 #define PCF8563_SC_LV 0x80 /* low voltage */
54 #define PCF8563_MO_C 0x80 /* century */
56 static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
57 static int pcf8563_detach(struct i2c_client *client);
60 * In the routines that deal directly with the pcf8563 hardware, we use
61 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
63 static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
65 unsigned char buf[13] = { PCF8563_REG_ST1 };
67 struct i2c_msg msgs[] = {
68 { client->addr, 0, 1, buf }, /* setup read ptr */
69 { client->addr, I2C_M_RD, 13, buf }, /* read status + date */
72 /* read registers */
73 if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
74 dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
75 return -EIO;
78 if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
79 dev_info(&client->dev,
80 "low voltage detected, date/time is not reliable.\n");
82 dev_dbg(&client->dev,
83 "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
84 "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
85 __FUNCTION__,
86 buf[0], buf[1], buf[2], buf[3],
87 buf[4], buf[5], buf[6], buf[7],
88 buf[8]);
91 tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F);
92 tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F);
93 tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
94 tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F);
95 tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
96 tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
97 tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR])
98 + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0);
100 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
101 "mday=%d, mon=%d, year=%d, wday=%d\n",
102 __FUNCTION__,
103 tm->tm_sec, tm->tm_min, tm->tm_hour,
104 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
106 /* the clock can give out invalid datetime, but we cannot return
107 * -EINVAL otherwise hwclock will refuse to set the time on bootup.
109 if (rtc_valid_tm(tm) < 0)
110 dev_err(&client->dev, "retrieved date/time is not valid.\n");
112 return 0;
115 static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
117 int i, err;
118 unsigned char buf[9];
120 dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
121 "mday=%d, mon=%d, year=%d, wday=%d\n",
122 __FUNCTION__,
123 tm->tm_sec, tm->tm_min, tm->tm_hour,
124 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
126 /* hours, minutes and seconds */
127 buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec);
128 buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min);
129 buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour);
131 buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday);
133 /* month, 1 - 12 */
134 buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1);
136 /* year and century */
137 buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100);
138 if (tm->tm_year / 100)
139 buf[PCF8563_REG_MO] |= PCF8563_MO_C;
141 buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
143 /* write register's data */
144 for (i = 0; i < 7; i++) {
145 unsigned char data[2] = { PCF8563_REG_SC + i,
146 buf[PCF8563_REG_SC + i] };
148 err = i2c_master_send(client, data, sizeof(data));
149 if (err != sizeof(data)) {
150 dev_err(&client->dev,
151 "%s: err=%d addr=%02x, data=%02x\n",
152 __FUNCTION__, err, data[0], data[1]);
153 return -EIO;
157 return 0;
160 struct pcf8563_limit
162 unsigned char reg;
163 unsigned char mask;
164 unsigned char min;
165 unsigned char max;
168 static int pcf8563_validate_client(struct i2c_client *client)
170 int i;
172 static const struct pcf8563_limit pattern[] = {
173 /* register, mask, min, max */
174 { PCF8563_REG_SC, 0x7F, 0, 59 },
175 { PCF8563_REG_MN, 0x7F, 0, 59 },
176 { PCF8563_REG_HR, 0x3F, 0, 23 },
177 { PCF8563_REG_DM, 0x3F, 0, 31 },
178 { PCF8563_REG_MO, 0x1F, 0, 12 },
181 /* check limits (only registers with bcd values) */
182 for (i = 0; i < ARRAY_SIZE(pattern); i++) {
183 int xfer;
184 unsigned char value;
185 unsigned char buf = pattern[i].reg;
187 struct i2c_msg msgs[] = {
188 { client->addr, 0, 1, &buf },
189 { client->addr, I2C_M_RD, 1, &buf },
192 xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
194 if (xfer != ARRAY_SIZE(msgs)) {
195 dev_err(&client->adapter->dev,
196 "%s: could not read register 0x%02X\n",
197 __FUNCTION__, pattern[i].reg);
199 return -EIO;
202 value = BCD2BIN(buf & pattern[i].mask);
204 if (value > pattern[i].max ||
205 value < pattern[i].min) {
206 dev_dbg(&client->adapter->dev,
207 "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
208 "max=%d, value=%d, raw=0x%02X\n",
209 __FUNCTION__, i, pattern[i].reg, pattern[i].mask,
210 pattern[i].min, pattern[i].max,
211 value, buf);
213 return -ENODEV;
217 return 0;
220 static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
222 return pcf8563_get_datetime(to_i2c_client(dev), tm);
225 static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
227 return pcf8563_set_datetime(to_i2c_client(dev), tm);
230 static struct rtc_class_ops pcf8563_rtc_ops = {
231 .read_time = pcf8563_rtc_read_time,
232 .set_time = pcf8563_rtc_set_time,
235 static int pcf8563_attach(struct i2c_adapter *adapter)
237 return i2c_probe(adapter, &addr_data, pcf8563_probe);
240 static struct i2c_driver pcf8563_driver = {
241 .driver = {
242 .name = "pcf8563",
244 .id = I2C_DRIVERID_PCF8563,
245 .attach_adapter = &pcf8563_attach,
246 .detach_client = &pcf8563_detach,
249 static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
251 struct i2c_client *client;
252 struct rtc_device *rtc;
254 int err = 0;
256 dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
258 if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
259 err = -ENODEV;
260 goto exit;
263 if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
264 err = -ENOMEM;
265 goto exit;
268 client->addr = address;
269 client->driver = &pcf8563_driver;
270 client->adapter = adapter;
272 strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
274 /* Verify the chip is really an PCF8563 */
275 if (kind < 0) {
276 if (pcf8563_validate_client(client) < 0) {
277 err = -ENODEV;
278 goto exit_kfree;
282 /* Inform the i2c layer */
283 if ((err = i2c_attach_client(client)))
284 goto exit_kfree;
286 dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
288 rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
289 &pcf8563_rtc_ops, THIS_MODULE);
291 if (IS_ERR(rtc)) {
292 err = PTR_ERR(rtc);
293 goto exit_detach;
296 i2c_set_clientdata(client, rtc);
298 return 0;
300 exit_detach:
301 i2c_detach_client(client);
303 exit_kfree:
304 kfree(client);
306 exit:
307 return err;
310 static int pcf8563_detach(struct i2c_client *client)
312 int err;
313 struct rtc_device *rtc = i2c_get_clientdata(client);
315 if (rtc)
316 rtc_device_unregister(rtc);
318 if ((err = i2c_detach_client(client)))
319 return err;
321 kfree(client);
323 return 0;
326 static int __init pcf8563_init(void)
328 return i2c_add_driver(&pcf8563_driver);
331 static void __exit pcf8563_exit(void)
333 i2c_del_driver(&pcf8563_driver);
336 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
337 MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
338 MODULE_LICENSE("GPL");
339 MODULE_VERSION(DRV_VERSION);
341 module_init(pcf8563_init);
342 module_exit(pcf8563_exit);