4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright 2010 Sun Microsystems, Inc. All rights reserved.
24 * Use is subject to license terms.
25 * Copyright 2017 Joyent, Inc.
28 #ifndef _SYS_MAC_SOFT_RING_H
29 #define _SYS_MAC_SOFT_RING_H
35 #include <sys/types.h>
36 #include <sys/cpuvar.h>
37 #include <sys/cpupart.h>
38 #include <sys/processor.h>
39 #include <sys/stream.h>
40 #include <sys/squeue.h>
42 #include <sys/mac_impl.h>
43 #include <sys/mac_stat.h>
45 #define S_RING_NAMELEN 64
47 #define MAX_SR_FANOUT 24
49 extern boolean_t mac_soft_ring_enable
;
50 extern boolean_t mac_latency_optimize
;
52 typedef struct mac_soft_ring_s mac_soft_ring_t
;
53 typedef struct mac_soft_ring_set_s mac_soft_ring_set_t
;
55 typedef void (*mac_soft_ring_drain_func_t
)(mac_soft_ring_t
*);
56 typedef mac_tx_cookie_t (*mac_tx_func_t
)(mac_soft_ring_set_t
*, mblk_t
*,
57 uintptr_t, uint16_t, mblk_t
**);
60 /* Tx notify callback */
61 typedef struct mac_tx_notify_cb_s
{
62 mac_cb_t mtnf_link
; /* Linked list of callbacks */
63 mac_tx_notify_t mtnf_fn
; /* The callback function */
64 void *mtnf_arg
; /* Callback function argument */
67 struct mac_soft_ring_s
{
68 /* Keep the most used members 64bytes cache aligned */
69 kmutex_t s_ring_lock
; /* lock before using any member */
70 uint16_t s_ring_type
; /* processing model of the sq */
71 uint16_t s_ring_state
; /* state flags and message count */
72 int s_ring_count
; /* # of mblocks in mac_soft_ring */
73 size_t s_ring_size
; /* Size of data queued */
74 mblk_t
*s_ring_first
; /* first mblk chain or NULL */
75 mblk_t
*s_ring_last
; /* last mblk chain or NULL */
77 mac_direct_rx_t s_ring_rx_func
;
79 mac_resource_handle_t s_ring_rx_arg2
;
82 * Threshold after which packets get dropped.
83 * Is always greater than s_ring_tx_hiwat
85 int s_ring_tx_max_q_cnt
;
86 /* # of mblocks after which to apply flow control */
88 /* # of mblocks after which to relieve flow control */
90 boolean_t s_ring_tx_woken_up
;
91 uint32_t s_ring_hiwat_cnt
; /* times blocked for Tx descs */
96 /* Tx notify callback */
97 mac_cb_info_t s_ring_notify_cb_info
; /* cb list info */
98 mac_cb_t
*s_ring_notify_cb_list
; /* The cb list */
100 clock_t s_ring_awaken
; /* time async thread was awakened */
102 kthread_t
*s_ring_run
; /* Current thread processing sq */
103 processorid_t s_ring_cpuid
; /* processor to bind to */
104 processorid_t s_ring_cpuid_save
; /* saved cpuid during offline */
105 kcondvar_t s_ring_async
; /* async thread blocks on */
106 clock_t s_ring_wait
; /* lbolts to wait after a fill() */
107 timeout_id_t s_ring_tid
; /* timer id of pending timeout() */
108 kthread_t
*s_ring_worker
; /* kernel thread id */
109 char s_ring_name
[S_RING_NAMELEN
+ 1];
110 uint32_t s_ring_total_inpkt
;
111 uint32_t s_ring_total_rbytes
;
112 uint32_t s_ring_drops
;
113 struct mac_client_impl_s
*s_ring_mcip
;
116 /* Teardown, poll disable control ops */
117 kcondvar_t s_ring_client_cv
; /* Client wait for control op */
119 mac_soft_ring_set_t
*s_ring_set
; /* The SRS this ring belongs to */
120 mac_soft_ring_t
*s_ring_next
;
121 mac_soft_ring_t
*s_ring_prev
;
122 mac_soft_ring_drain_func_t s_ring_drain_func
;
124 mac_tx_stats_t s_st_stat
;
127 typedef void (*mac_srs_drain_proc_t
)(mac_soft_ring_set_t
*, uint_t
);
129 /* Transmit side Soft Ring Set */
130 typedef struct mac_srs_tx_s
{
131 /* Members for Tx size processing */
133 mac_tx_func_t st_func
;
136 mac_group_t
*st_group
; /* TX group for share */
137 boolean_t st_woken_up
;
140 * st_max_q_cnt is the queue depth threshold to limit
141 * outstanding packets on the Tx SRS. Once the limit
142 * is reached, Tx SRS will drop packets until the
143 * limit goes below the threshold.
145 uint32_t st_max_q_cnt
; /* max. outstanding packets */
147 * st_hiwat is used Tx serializer and bandwidth mode.
148 * This is the queue depth threshold upto which
149 * packets will get buffered with no flow-control
150 * back pressure applied to the caller. Once this
151 * threshold is reached, back pressure will be
152 * applied to the caller of mac_tx() (mac_tx() starts
153 * returning a cookie to indicate a blocked SRS).
154 * st_hiwat should always be lesser than or equal to
157 uint32_t st_hiwat
; /* mblk cnt to apply flow control */
158 uint32_t st_lowat
; /* mblk cnt to relieve flow control */
159 uint32_t st_hiwat_cnt
; /* times blocked for Tx descs */
160 mac_tx_stats_t st_stat
;
161 mac_capab_aggr_t st_capab_aggr
;
163 * st_soft_rings is used as an array to store aggr Tx soft
164 * rings. When aggr_find_tx_ring() returns a pseudo ring,
165 * the associated soft ring has to be found. st_soft_rings
166 * array stores the soft ring associated with a pseudo Tx
167 * ring and it can be accessed using the pseudo ring
168 * index (mr_index). Note that the ring index is unique
169 * for each ring in a group.
171 mac_soft_ring_t
**st_soft_rings
;
174 /* Receive side Soft Ring Set */
175 typedef struct mac_srs_rx_s
{
177 * Upcall Function for fanout, Rx processing etc. Perhaps
178 * the same 3 members below can be used for Tx
179 * processing, but looking around, mac_rx_func_t has
180 * proliferated too much into various files at different
181 * places. I am leaving the consolidation battle for
184 mac_direct_rx_t sr_func
; /* srs_lock */
185 void *sr_arg1
; /* srs_lock */
186 mac_resource_handle_t sr_arg2
; /* srs_lock */
187 mac_rx_func_t sr_lower_proc
; /* Atomically changed */
188 uint32_t sr_poll_pkt_cnt
;
189 uint32_t sr_poll_thres
;
191 /* mblk cnt to apply flow control */
193 /* mblk cnt to relieve flow control */
195 mac_rx_stats_t sr_stat
;
197 /* Times polling was enabled */
199 /* Times polling was enabled by worker thread */
200 uint32_t sr_worker_poll_on
;
201 /* Times polling was disabled */
202 uint32_t sr_poll_off
;
203 /* Poll thread signalled count */
204 uint32_t sr_poll_thr_sig
;
205 /* Poll thread busy */
206 uint32_t sr_poll_thr_busy
;
207 /* SRS drains, stays in poll mode but doesn't poll */
208 uint32_t sr_poll_drain_no_poll
;
210 * SRS has nothing to do and no packets in H/W but
211 * there is a backlog in softrings. SRS stays in
212 * poll mode but doesn't do polling.
214 uint32_t sr_poll_no_poll
;
215 /* Active polling restarted */
216 uint32_t sr_below_hiwat
;
217 /* Found packets in last poll so try and poll again */
218 uint32_t sr_poll_again
;
220 * Packets in queue but poll thread not allowed to process so
221 * signal the worker thread.
223 uint32_t sr_poll_sig_worker
;
225 * Poll thread has nothing to do and H/W has nothing so
226 * reenable the interrupts.
228 uint32_t sr_poll_intr_enable
;
230 * Poll thread has nothing to do and worker thread was already
231 * running so it can decide to reenable interrupt or poll again.
233 uint32_t sr_poll_goto_sleep
;
234 /* Worker thread goes back to draining the queue */
235 uint32_t sr_drain_again
;
236 /* More Packets in queue so signal the poll thread to drain */
237 uint32_t sr_drain_poll_sig
;
238 /* More Packets in queue so signal the worker thread to drain */
239 uint32_t sr_drain_worker_sig
;
240 /* Poll thread is already running so worker has nothing to do */
241 uint32_t sr_drain_poll_running
;
242 /* We have packets already queued so keep polling */
243 uint32_t sr_drain_keep_polling
;
244 /* Drain is done and interrupts are reenabled */
245 uint32_t sr_drain_finish_intr
;
246 /* Polling thread needs to schedule worker wakeup */
247 uint32_t sr_poll_worker_wakeup
;
251 * mac_soft_ring_set_s:
252 * This is used both for Tx and Rx side. The srs_type identifies Rx or
255 * Note that the structure is carefully crafted, with Rx elements coming
256 * first followed by Tx specific members. Future additions to this
257 * structure should follow the same guidelines.
260 * mac_rx_classify_flow_add() always creates a mac_soft_ring_set_t and fn_flow
261 * points to info from it (func = srs_lower_proc, arg = soft_ring_set). On
262 * interrupt path, srs_lower_proc does B/W adjustment and switch to polling mode
263 * (if poll capable) and feeds the packets to soft_ring_list via choosen
264 * fanout type (specified by srs_type). In poll mode, the poll thread which is
265 * also a pointer can pick up the packets and feed them to various
268 * The srs_type can either be protocol based or fanout based where fanout itelf
269 * can be various types
271 * The polling works by turning off interrupts as soon as a packets
272 * are queued on the soft ring set. Once the backlog is clear and poll
273 * thread return empty handed i.e. Rx ring doesn't have anything, the
274 * interrupt is turned back on. For this purpose we keep a separate
275 * srs_poll_pkt_cnt counter which tracks the packets queued between SRS
276 * and the soft rings as well. The counter is incremented when packets
277 * are queued and decremented when SRS processes them (in case it has
278 * no soft rings) or the soft ring process them. Its important that
279 * in case SRS has softrings, the decrement doesn't happen till the
280 * packet is processed by the soft rings since it takes very little time
281 * for SRS to queue packet from SRS to soft rings and it will keep
282 * bringing more packets in the system faster than soft rings can
286 * The srs structure acts as a serializer with a worker thread. The
287 * default behavior of srs though is to act as a pass-thru. The queues
288 * (srs_first, srs_last, srs_count) get used when Tx ring runs out of Tx
289 * descriptors or to enforce bandwidth limits.
291 * When multiple Tx rings are present, the SRS state will be set to
292 * SRS_FANOUT_OTH. Outgoing packets coming into mac_tx_srs_process()
293 * function will be fanned out to one of the Tx side soft rings based on
294 * a hint passed in mac_tx_srs_process(). Each soft ring, in turn, will
295 * be associated with a distinct h/w Tx ring.
298 struct mac_soft_ring_set_s
{
300 * Common elements, common to both Rx and Tx SRS type.
301 * The following block of fields are protected by srs_lock
305 uint32_t srs_state
; /* state flags */
307 mblk_t
*srs_first
; /* first mblk chain or NULL */
308 mblk_t
*srs_last
; /* last mblk chain or NULL */
309 kcondvar_t srs_async
; /* cv for worker thread */
310 kcondvar_t srs_cv
; /* cv for poll thread */
311 kcondvar_t srs_quiesce_done_cv
; /* cv for removal */
312 timeout_id_t srs_tid
; /* timeout id for pending timeout */
315 * List of soft rings & processing function.
316 * The following block is protected by Rx quiescence.
317 * i.e. they can be changed only after quiescing the SRS
318 * Protected by srs_lock.
320 mac_soft_ring_t
*srs_soft_ring_head
;
321 mac_soft_ring_t
*srs_soft_ring_tail
;
322 int srs_soft_ring_count
;
323 int srs_soft_ring_quiesced_count
;
324 int srs_soft_ring_condemned_count
;
325 mac_soft_ring_t
**srs_tcp_soft_rings
;
326 int srs_tcp_ring_count
;
327 mac_soft_ring_t
**srs_udp_soft_rings
;
328 int srs_udp_ring_count
;
329 mac_soft_ring_t
**srs_oth_soft_rings
;
330 int srs_oth_ring_count
;
332 * srs_tx_soft_rings is used by tx_srs in
333 * when operating in multi tx ring mode.
335 mac_soft_ring_t
**srs_tx_soft_rings
;
336 int srs_tx_ring_count
;
339 * Bandwidth control related members.
340 * They are common to both Rx- and Tx-side.
341 * Following protected by srs_lock
343 mac_bw_ctl_t
*srs_bw
;
344 size_t srs_size
; /* Size of packets queued in bytes */
347 mac_soft_ring_set_t
*srs_next
; /* mac_srs_g_lock */
348 mac_soft_ring_set_t
*srs_prev
; /* mac_srs_g_lock */
350 /* Attribute specific drain func (BW ctl vs non-BW ctl) */
351 mac_srs_drain_proc_t srs_drain_func
; /* Write once (WO) */
354 * If the associated ring is exclusively used by a mac client, e.g.,
355 * an aggregation, this fields is used to keep a reference to the
356 * MAC client's pseudo ring.
358 mac_resource_handle_t srs_mrh
;
360 * The following blocks are write once (WO) and valid for the life
363 struct mac_client_impl_s
*srs_mcip
; /* back ptr to mac client */
364 void *srs_flent
; /* back ptr to flent */
365 mac_ring_t
*srs_ring
; /* Ring Descriptor */
367 /* Teardown, disable control ops */
368 kcondvar_t srs_client_cv
; /* Client wait for the control op */
370 kthread_t
*srs_worker
; /* WO, worker thread */
371 kthread_t
*srs_poll_thr
; /* WO, poll thread */
373 uint_t srs_ind
; /* Round Robin indx for picking up SR */
374 processorid_t srs_worker_cpuid
; /* processor to bind to */
375 processorid_t srs_worker_cpuid_save
; /* saved cpuid during offline */
376 processorid_t srs_poll_cpuid
; /* processor to bind to */
377 processorid_t srs_poll_cpuid_save
; /* saved cpuid during offline */
378 uint_t srs_fanout_state
;
387 * type flags - combination allowed to process and drain the queue
389 #define ST_RING_WORKER_ONLY 0x0001 /* Worker thread only */
390 #define ST_RING_ANY 0x0002 /* Any thread can process the queue */
391 #define ST_RING_TCP 0x0004
392 #define ST_RING_UDP 0x0008
393 #define ST_RING_OTH 0x0010
395 #define ST_RING_BW_CTL 0x0020
396 #define ST_RING_TX 0x0040
401 #define S_RING_PROC 0x0001 /* being processed */
402 #define S_RING_BOUND 0x0002 /* Worker thread is bound to a cpu */
403 #define S_RING_BLOCK 0x0004 /* No Tx descs */
404 #define S_RING_TX_HIWAT 0x0008 /* Tx high watermark reached */
406 #define S_RING_WAKEUP_CLIENT 0x0010 /* flow ctrl, client wakeup needed */
407 #define S_RING_BLANK 0x0020 /* Has been put into polling mode */
408 #define S_RING_CLIENT_WAIT 0x0040 /* Client waiting for control op */
410 #define S_RING_CONDEMNED 0x0100 /* Being torn down */
411 #define S_RING_CONDEMNED_DONE 0x0200 /* Being torn down */
412 #define S_RING_QUIESCE 0x0400 /* No traffic flow, transient flag */
413 #define S_RING_QUIESCE_DONE 0x0800 /* No traffic flow, transient flag */
415 #define S_RING_RESTART 0x1000 /* Go back to normal traffic flow */
416 #define S_RING_ENQUEUED 0x2000 /* Pkts enqueued in Tx soft ring */
419 * arguments for processors to bind to
421 #define S_RING_BIND_NONE -1
424 * defines for srs_type - identifies a link or a sub-flow
425 * and other static characteristics of a SRS like a tx
426 * srs, tcp only srs, etc.
428 #define SRST_LINK 0x00000001
429 #define SRST_FLOW 0x00000002
430 #define SRST_NO_SOFT_RINGS 0x00000004
431 #define SRST_TCP_ONLY 0x00000008
433 #define SRST_FANOUT_PROTO 0x00000010
434 #define SRST_FANOUT_SRC_IP 0x00000020
435 #define SRST_FANOUT_OTH 0x00000040
436 #define SRST_DEFAULT_GRP 0x00000080
438 #define SRST_TX 0x00000100
439 #define SRST_BW_CONTROL 0x00000200
440 #define SRST_DIRECT_POLL 0x00000400
442 #define SRST_DLS_BYPASS 0x00001000
443 #define SRST_CLIENT_POLL_ENABLED 0x00002000
446 * soft ring set flags. These bits are dynamic in nature and get
447 * applied to srs_state. They reflect the state of SRS at any
450 #define SRS_BLANK 0x00000001
451 #define SRS_WORKER_BOUND 0x00000002
452 #define SRS_POLL_BOUND 0x00000004
453 #define SRS_POLLING_CAPAB 0x00000008
455 #define SRS_PROC 0x00000010
456 #define SRS_GET_PKTS 0x00000020
457 #define SRS_POLLING 0x00000040
458 #define SRS_BW_ENFORCED 0x00000080
460 #define SRS_WORKER 0x00000100
461 #define SRS_ENQUEUED 0x00000200
462 #define SRS_ANY_PROCESS 0x00000400
463 #define SRS_PROC_FAST 0x00000800
465 #define SRS_POLL_PROC 0x00001000
466 #define SRS_TX_BLOCKED 0x00002000 /* out of Tx descs */
467 #define SRS_TX_HIWAT 0x00004000 /* Tx count exceeds hiwat */
468 #define SRS_TX_WAKEUP_CLIENT 0x00008000 /* Flow-ctl: wakeup client */
470 #define SRS_CLIENT_PROC 0x00010000
471 #define SRS_CLIENT_WAIT 0x00020000
472 #define SRS_QUIESCE 0x00040000
473 #define SRS_QUIESCE_DONE 0x00080000
475 #define SRS_CONDEMNED 0x00100000
476 #define SRS_CONDEMNED_DONE 0x00200000
477 #define SRS_POLL_THR_QUIESCED 0x00400000
478 #define SRS_RESTART 0x00800000
480 #define SRS_RESTART_DONE 0x01000000
481 #define SRS_POLL_THR_RESTART 0x02000000
482 #define SRS_IN_GLIST 0x04000000
483 #define SRS_POLL_THR_EXITED 0x08000000
485 #define SRS_QUIESCE_PERM 0x10000000
486 #define SRS_LATENCY_OPT 0x20000000
487 #define SRS_SOFTRING_QUEUE 0x40000000
489 #define SRS_QUIESCED(srs) (srs->srs_state & SRS_QUIESCE_DONE)
492 * If the SRS_QUIESCE_PERM flag is set, the SRS worker thread will not be
493 * able to be restarted.
495 #define SRS_QUIESCED_PERMANENT(srs) (srs->srs_state & SRS_QUIESCE_PERM)
498 * soft ring set (SRS) Tx modes
514 SRS_FANOUT_UNINIT
= 0,
517 } mac_srs_fanout_state_t
;
520 * Structure for dls statistics
523 kstat_named_t dlss_soft_ring_pkt_drop
;
526 extern struct dls_kstats dls_kstat
;
528 #define DLS_BUMP_STAT(x, y) (dls_kstat.x.value.ui32 += y)
530 /* Turn dynamic polling off */
531 #define MAC_SRS_POLLING_OFF(mac_srs) { \
532 ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \
533 if (((mac_srs)->srs_state & (SRS_POLLING_CAPAB|SRS_POLLING)) == \
534 (SRS_POLLING_CAPAB|SRS_POLLING)) { \
535 (mac_srs)->srs_state &= ~SRS_POLLING; \
536 (void) mac_hwring_enable_intr((mac_ring_handle_t) \
537 (mac_srs)->srs_ring); \
538 (mac_srs)->srs_rx.sr_poll_off++; \
542 #define MAC_COUNT_CHAIN(mac_srs, head, tail, cnt, sz) { \
544 boolean_t bw_ctl = B_FALSE; \
546 ASSERT((head) != NULL); \
549 if ((mac_srs)->srs_type & SRST_BW_CONTROL) \
551 tmp = tail = (head); \
552 if ((head)->b_next == NULL) { \
555 sz += msgdsize(head); \
557 while (tmp != NULL) { \
561 sz += msgdsize(tmp); \
568 * Decrement the cumulative packet count in SRS and its
569 * soft rings. If the srs_poll_pkt_cnt goes below lowat, then check
570 * if if the interface was left in a polling mode and no one
571 * is really processing the queue (to get the interface out
572 * of poll mode). If no one is processing the queue, then
573 * acquire the PROC and signal the poll thread to check the
574 * interface for packets and get the interface back to interrupt
575 * mode if nothing is found.
577 #define MAC_UPDATE_SRS_COUNT_LOCKED(mac_srs, cnt) { \
578 mac_srs_rx_t *srs_rx = &(mac_srs)->srs_rx; \
579 ASSERT(MUTEX_HELD(&(mac_srs)->srs_lock)); \
581 srs_rx->sr_poll_pkt_cnt -= cnt; \
582 if ((srs_rx->sr_poll_pkt_cnt <= srs_rx->sr_poll_thres) && \
583 (((mac_srs)->srs_state & \
584 (SRS_POLLING|SRS_PROC|SRS_GET_PKTS)) == SRS_POLLING)) \
586 (mac_srs)->srs_state |= (SRS_PROC|SRS_GET_PKTS); \
587 cv_signal(&(mac_srs)->srs_cv); \
588 srs_rx->sr_below_hiwat++; \
593 * The following two macros are used to update the inbound packet and byte.
594 * count. The packet and byte count reflect the packets and bytes that are
595 * taken out of the SRS's queue, i.e. indicating they are being delivered.
596 * The srs_count and srs_size are updated in different locations as the
597 * srs_size is also used to take into account any bandwidth limits. The
598 * srs_size is updated only when a soft ring, if any, sends a packet up,
599 * as opposed to updating it when the SRS sends a packet to the SR, i.e.
600 * the srs_size reflects the packets in the SRS and SRs. These
601 * macros decrement the srs_size and srs_count and also increment the
602 * ipackets and ibytes stats resp.
604 * xxx-venu These are done under srs_lock, for now we still update
605 * mci_stat_ibytes/mci_stat_ipackets atomically, need to check if
606 * just updating them would be accurate enough.
608 * If we are updating these for a sub-flow SRS, then we need to also
609 * updated it's MAC client bandwidth info, if the MAC client is also
610 * bandwidth regulated.
612 #define MAC_UPDATE_SRS_SIZE_LOCKED(srs, sz) { \
613 if ((srs)->srs_type & SRST_BW_CONTROL) { \
614 mutex_enter(&(srs)->srs_bw->mac_bw_lock); \
615 (srs)->srs_bw->mac_bw_sz -= (sz); \
616 (srs)->srs_bw->mac_bw_used += (sz); \
617 mutex_exit(&(srs)->srs_bw->mac_bw_lock); \
621 #define MAC_TX_UPDATE_BW_INFO(srs, sz) { \
622 (srs)->srs_bw->mac_bw_sz -= (sz); \
623 (srs)->srs_bw->mac_bw_used += (sz); \
626 #define MAC_TX_SOFT_RINGS(mac_srs) ((mac_srs)->srs_tx_ring_count >= 1)
628 /* Soft ring flags for teardown */
629 #define SRS_POLL_THR_OWNER (SRS_PROC | SRS_POLLING | SRS_GET_PKTS)
630 #define SRS_PAUSE (SRS_CONDEMNED | SRS_QUIESCE)
631 #define S_RING_PAUSE (S_RING_CONDEMNED | S_RING_QUIESCE)
634 extern void mac_soft_ring_init(void);
635 extern void mac_soft_ring_finish(void);
636 extern void mac_fanout_setup(mac_client_impl_t
*, flow_entry_t
*,
637 mac_resource_props_t
*, mac_direct_rx_t
, void *, mac_resource_handle_t
,
640 extern void mac_soft_ring_worker_wakeup(mac_soft_ring_t
*);
641 extern void mac_soft_ring_blank(void *, time_t, uint_t
, int);
642 extern mblk_t
*mac_soft_ring_poll(mac_soft_ring_t
*, int);
643 extern void mac_soft_ring_destroy(mac_soft_ring_t
*);
644 extern void mac_soft_ring_dls_bypass(void *, mac_direct_rx_t
, void *);
647 extern mac_soft_ring_set_t
*mac_srs_create(struct mac_client_impl_s
*,
648 flow_entry_t
*, uint32_t, mac_direct_rx_t
, void *, mac_resource_handle_t
,
650 extern void mac_srs_free(mac_soft_ring_set_t
*);
651 extern void mac_srs_signal(mac_soft_ring_set_t
*, uint_t
);
652 extern cpu_t
*mac_srs_bind(mac_soft_ring_set_t
*, processorid_t
);
653 extern void mac_rx_srs_retarget_intr(mac_soft_ring_set_t
*, processorid_t
);
654 extern void mac_tx_srs_retarget_intr(mac_soft_ring_set_t
*);
656 extern void mac_srs_quiesce_initiate(mac_soft_ring_set_t
*);
657 extern void mac_srs_client_poll_enable(struct mac_client_impl_s
*,
658 mac_soft_ring_set_t
*);
659 extern void mac_srs_client_poll_disable(struct mac_client_impl_s
*,
660 mac_soft_ring_set_t
*);
661 extern void mac_srs_client_poll_quiesce(struct mac_client_impl_s
*,
662 mac_soft_ring_set_t
*);
663 extern void mac_srs_client_poll_restart(struct mac_client_impl_s
*,
664 mac_soft_ring_set_t
*);
665 extern void mac_rx_srs_quiesce(mac_soft_ring_set_t
*, uint_t
);
666 extern void mac_rx_srs_restart(mac_soft_ring_set_t
*);
667 extern void mac_rx_srs_subflow_process(void *, mac_resource_handle_t
, mblk_t
*,
669 extern void mac_tx_srs_quiesce(mac_soft_ring_set_t
*, uint_t
);
671 /* Tx SRS, Tx softring */
672 extern void mac_tx_srs_wakeup(mac_soft_ring_set_t
*, mac_ring_handle_t
);
673 extern void mac_tx_srs_setup(struct mac_client_impl_s
*, flow_entry_t
*);
674 extern mac_tx_func_t
mac_tx_get_func(uint32_t);
675 extern mblk_t
*mac_tx_send(mac_client_handle_t
, mac_ring_handle_t
, mblk_t
*,
677 extern boolean_t
mac_tx_srs_ring_present(mac_soft_ring_set_t
*, mac_ring_t
*);
678 extern mac_soft_ring_t
*mac_tx_srs_get_soft_ring(mac_soft_ring_set_t
*,
680 extern void mac_tx_srs_add_ring(mac_soft_ring_set_t
*, mac_ring_t
*);
681 extern void mac_tx_srs_del_ring(mac_soft_ring_set_t
*, mac_ring_t
*);
682 extern mac_tx_cookie_t
mac_tx_srs_no_desc(mac_soft_ring_set_t
*, mblk_t
*,
683 uint16_t, mblk_t
**);
685 /* Subflow specific stuff */
686 extern int mac_srs_flow_create(struct mac_client_impl_s
*, flow_entry_t
*,
687 mac_resource_props_t
*, int, int, mac_direct_rx_t
);
688 extern void mac_srs_update_bwlimit(flow_entry_t
*, mac_resource_props_t
*);
689 extern void mac_srs_adjust_subflow_bwlimit(struct mac_client_impl_s
*);
690 extern void mac_srs_update_drv(struct mac_client_impl_s
*);
691 extern void mac_update_srs_priority(mac_soft_ring_set_t
*, pri_t
);
692 extern void mac_client_update_classifier(mac_client_impl_t
*, boolean_t
);
694 extern void mac_soft_ring_intr_enable(void *);
695 extern boolean_t
mac_soft_ring_intr_disable(void *);
696 extern mac_soft_ring_t
*mac_soft_ring_create(int, clock_t, uint16_t,
697 pri_t
, mac_client_impl_t
*, mac_soft_ring_set_t
*,
698 processorid_t
, mac_direct_rx_t
, void *, mac_resource_handle_t
);
699 extern cpu_t
*mac_soft_ring_bind(mac_soft_ring_t
*, processorid_t
);
700 extern void mac_soft_ring_unbind(mac_soft_ring_t
*);
701 extern void mac_soft_ring_free(mac_soft_ring_t
*);
702 extern void mac_soft_ring_signal(mac_soft_ring_t
*, uint_t
);
703 extern void mac_rx_soft_ring_process(mac_client_impl_t
*, mac_soft_ring_t
*,
704 mblk_t
*, mblk_t
*, int, size_t);
705 extern mac_tx_cookie_t
mac_tx_soft_ring_process(mac_soft_ring_t
*,
706 mblk_t
*, uint16_t, mblk_t
**);
707 extern void mac_srs_worker_quiesce(mac_soft_ring_set_t
*);
708 extern void mac_srs_worker_restart(mac_soft_ring_set_t
*);
709 extern void mac_rx_attach_flow_srs(mac_impl_t
*, flow_entry_t
*,
710 mac_soft_ring_set_t
*, mac_ring_t
*, mac_classify_type_t
);
712 extern void mac_rx_srs_drain_bw(mac_soft_ring_set_t
*, uint_t
);
713 extern void mac_rx_srs_drain(mac_soft_ring_set_t
*, uint_t
);
714 extern void mac_rx_srs_process(void *, mac_resource_handle_t
, mblk_t
*,
716 extern void mac_srs_worker(mac_soft_ring_set_t
*);
717 extern void mac_rx_srs_poll_ring(mac_soft_ring_set_t
*);
718 extern void mac_tx_srs_drain(mac_soft_ring_set_t
*, uint_t
);
720 extern void mac_tx_srs_restart(mac_soft_ring_set_t
*);
721 extern void mac_rx_srs_remove(mac_soft_ring_set_t
*);
727 #endif /* _SYS_MAC_SOFT_RING_H */