5689 Want support for newer Intel I218 parts
[unleashed.git] / usr / src / uts / common / io / igb / igb_main.c
blob3a215116fb5e0dfa3fe83f91a70d561b123a345e
1 /*
2 * CDDL HEADER START
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
19 * CDDL HEADER END
23 * Copyright (c) 2007-2012 Intel Corporation. All rights reserved.
27 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
28 * Copyright 2013, Nexenta Systems, Inc. All rights reserved.
31 #include "igb_sw.h"
33 static char ident[] = "Intel 1Gb Ethernet";
34 static char igb_version[] = "igb 2.3.8-ish";
37 * Local function protoypes
39 static int igb_register_mac(igb_t *);
40 static int igb_identify_hardware(igb_t *);
41 static int igb_regs_map(igb_t *);
42 static void igb_init_properties(igb_t *);
43 static int igb_init_driver_settings(igb_t *);
44 static void igb_init_locks(igb_t *);
45 static void igb_destroy_locks(igb_t *);
46 static int igb_init_mac_address(igb_t *);
47 static int igb_init(igb_t *);
48 static int igb_init_adapter(igb_t *);
49 static void igb_stop_adapter(igb_t *);
50 static int igb_reset(igb_t *);
51 static void igb_tx_clean(igb_t *);
52 static boolean_t igb_tx_drain(igb_t *);
53 static boolean_t igb_rx_drain(igb_t *);
54 static int igb_alloc_rings(igb_t *);
55 static int igb_alloc_rx_data(igb_t *);
56 static void igb_free_rx_data(igb_t *);
57 static void igb_free_rings(igb_t *);
58 static void igb_setup_rings(igb_t *);
59 static void igb_setup_rx(igb_t *);
60 static void igb_setup_tx(igb_t *);
61 static void igb_setup_rx_ring(igb_rx_ring_t *);
62 static void igb_setup_tx_ring(igb_tx_ring_t *);
63 static void igb_setup_rss(igb_t *);
64 static void igb_setup_mac_rss_classify(igb_t *);
65 static void igb_setup_mac_classify(igb_t *);
66 static void igb_init_unicst(igb_t *);
67 static void igb_setup_multicst(igb_t *);
68 static void igb_get_phy_state(igb_t *);
69 static void igb_param_sync(igb_t *);
70 static void igb_get_conf(igb_t *);
71 static int igb_get_prop(igb_t *, char *, int, int, int);
72 static boolean_t igb_is_link_up(igb_t *);
73 static boolean_t igb_link_check(igb_t *);
74 static void igb_local_timer(void *);
75 static void igb_link_timer(void *);
76 static void igb_arm_watchdog_timer(igb_t *);
77 static void igb_start_watchdog_timer(igb_t *);
78 static void igb_restart_watchdog_timer(igb_t *);
79 static void igb_stop_watchdog_timer(igb_t *);
80 static void igb_start_link_timer(igb_t *);
81 static void igb_stop_link_timer(igb_t *);
82 static void igb_disable_adapter_interrupts(igb_t *);
83 static void igb_enable_adapter_interrupts_82575(igb_t *);
84 static void igb_enable_adapter_interrupts_82576(igb_t *);
85 static void igb_enable_adapter_interrupts_82580(igb_t *);
86 static boolean_t is_valid_mac_addr(uint8_t *);
87 static boolean_t igb_stall_check(igb_t *);
88 static boolean_t igb_set_loopback_mode(igb_t *, uint32_t);
89 static void igb_set_external_loopback(igb_t *);
90 static void igb_set_internal_phy_loopback(igb_t *);
91 static void igb_set_internal_serdes_loopback(igb_t *);
92 static boolean_t igb_find_mac_address(igb_t *);
93 static int igb_alloc_intrs(igb_t *);
94 static int igb_alloc_intr_handles(igb_t *, int);
95 static int igb_add_intr_handlers(igb_t *);
96 static void igb_rem_intr_handlers(igb_t *);
97 static void igb_rem_intrs(igb_t *);
98 static int igb_enable_intrs(igb_t *);
99 static int igb_disable_intrs(igb_t *);
100 static void igb_setup_msix_82575(igb_t *);
101 static void igb_setup_msix_82576(igb_t *);
102 static void igb_setup_msix_82580(igb_t *);
103 static uint_t igb_intr_legacy(void *, void *);
104 static uint_t igb_intr_msi(void *, void *);
105 static uint_t igb_intr_rx(void *, void *);
106 static uint_t igb_intr_tx(void *, void *);
107 static uint_t igb_intr_tx_other(void *, void *);
108 static void igb_intr_rx_work(igb_rx_ring_t *);
109 static void igb_intr_tx_work(igb_tx_ring_t *);
110 static void igb_intr_link_work(igb_t *);
111 static void igb_get_driver_control(struct e1000_hw *);
112 static void igb_release_driver_control(struct e1000_hw *);
114 static int igb_attach(dev_info_t *, ddi_attach_cmd_t);
115 static int igb_detach(dev_info_t *, ddi_detach_cmd_t);
116 static int igb_resume(dev_info_t *);
117 static int igb_suspend(dev_info_t *);
118 static int igb_quiesce(dev_info_t *);
119 static void igb_unconfigure(dev_info_t *, igb_t *);
120 static int igb_fm_error_cb(dev_info_t *, ddi_fm_error_t *,
121 const void *);
122 static void igb_fm_init(igb_t *);
123 static void igb_fm_fini(igb_t *);
124 static void igb_release_multicast(igb_t *);
126 char *igb_priv_props[] = {
127 "_eee_support",
128 "_tx_copy_thresh",
129 "_tx_recycle_thresh",
130 "_tx_overload_thresh",
131 "_tx_resched_thresh",
132 "_rx_copy_thresh",
133 "_rx_limit_per_intr",
134 "_intr_throttling",
135 "_adv_pause_cap",
136 "_adv_asym_pause_cap",
137 NULL
140 static struct cb_ops igb_cb_ops = {
141 nulldev, /* cb_open */
142 nulldev, /* cb_close */
143 nodev, /* cb_strategy */
144 nodev, /* cb_print */
145 nodev, /* cb_dump */
146 nodev, /* cb_read */
147 nodev, /* cb_write */
148 nodev, /* cb_ioctl */
149 nodev, /* cb_devmap */
150 nodev, /* cb_mmap */
151 nodev, /* cb_segmap */
152 nochpoll, /* cb_chpoll */
153 ddi_prop_op, /* cb_prop_op */
154 NULL, /* cb_stream */
155 D_MP | D_HOTPLUG, /* cb_flag */
156 CB_REV, /* cb_rev */
157 nodev, /* cb_aread */
158 nodev /* cb_awrite */
161 static struct dev_ops igb_dev_ops = {
162 DEVO_REV, /* devo_rev */
163 0, /* devo_refcnt */
164 NULL, /* devo_getinfo */
165 nulldev, /* devo_identify */
166 nulldev, /* devo_probe */
167 igb_attach, /* devo_attach */
168 igb_detach, /* devo_detach */
169 nodev, /* devo_reset */
170 &igb_cb_ops, /* devo_cb_ops */
171 NULL, /* devo_bus_ops */
172 ddi_power, /* devo_power */
173 igb_quiesce, /* devo_quiesce */
176 static struct modldrv igb_modldrv = {
177 &mod_driverops, /* Type of module. This one is a driver */
178 ident, /* Discription string */
179 &igb_dev_ops, /* driver ops */
182 static struct modlinkage igb_modlinkage = {
183 MODREV_1, &igb_modldrv, NULL
186 /* Access attributes for register mapping */
187 ddi_device_acc_attr_t igb_regs_acc_attr = {
188 DDI_DEVICE_ATTR_V1,
189 DDI_STRUCTURE_LE_ACC,
190 DDI_STRICTORDER_ACC,
191 DDI_FLAGERR_ACC
194 #define IGB_M_CALLBACK_FLAGS \
195 (MC_IOCTL | MC_GETCAPAB | MC_SETPROP | MC_GETPROP | MC_PROPINFO)
197 static mac_callbacks_t igb_m_callbacks = {
198 IGB_M_CALLBACK_FLAGS,
199 igb_m_stat,
200 igb_m_start,
201 igb_m_stop,
202 igb_m_promisc,
203 igb_m_multicst,
204 NULL,
205 NULL,
206 NULL,
207 igb_m_ioctl,
208 igb_m_getcapab,
209 NULL,
210 NULL,
211 igb_m_setprop,
212 igb_m_getprop,
213 igb_m_propinfo
217 * Initialize capabilities of each supported adapter type
219 static adapter_info_t igb_82575_cap = {
220 /* limits */
221 4, /* maximum number of rx queues */
222 1, /* minimum number of rx queues */
223 4, /* default number of rx queues */
224 4, /* maximum number of tx queues */
225 1, /* minimum number of tx queues */
226 4, /* default number of tx queues */
227 65535, /* maximum interrupt throttle rate */
228 0, /* minimum interrupt throttle rate */
229 200, /* default interrupt throttle rate */
231 /* function pointers */
232 igb_enable_adapter_interrupts_82575,
233 igb_setup_msix_82575,
235 /* capabilities */
236 (IGB_FLAG_HAS_DCA | /* capability flags */
237 IGB_FLAG_VMDQ_POOL),
239 0xffc00000 /* mask for RXDCTL register */
242 static adapter_info_t igb_82576_cap = {
243 /* limits */
244 16, /* maximum number of rx queues */
245 1, /* minimum number of rx queues */
246 4, /* default number of rx queues */
247 16, /* maximum number of tx queues */
248 1, /* minimum number of tx queues */
249 4, /* default number of tx queues */
250 65535, /* maximum interrupt throttle rate */
251 0, /* minimum interrupt throttle rate */
252 200, /* default interrupt throttle rate */
254 /* function pointers */
255 igb_enable_adapter_interrupts_82576,
256 igb_setup_msix_82576,
258 /* capabilities */
259 (IGB_FLAG_HAS_DCA | /* capability flags */
260 IGB_FLAG_VMDQ_POOL |
261 IGB_FLAG_NEED_CTX_IDX),
263 0xffe00000 /* mask for RXDCTL register */
266 static adapter_info_t igb_82580_cap = {
267 /* limits */
268 8, /* maximum number of rx queues */
269 1, /* minimum number of rx queues */
270 4, /* default number of rx queues */
271 8, /* maximum number of tx queues */
272 1, /* minimum number of tx queues */
273 4, /* default number of tx queues */
274 65535, /* maximum interrupt throttle rate */
275 0, /* minimum interrupt throttle rate */
276 200, /* default interrupt throttle rate */
278 /* function pointers */
279 igb_enable_adapter_interrupts_82580,
280 igb_setup_msix_82580,
282 /* capabilities */
283 (IGB_FLAG_HAS_DCA | /* capability flags */
284 IGB_FLAG_VMDQ_POOL |
285 IGB_FLAG_NEED_CTX_IDX),
287 0xffe00000 /* mask for RXDCTL register */
290 static adapter_info_t igb_i350_cap = {
291 /* limits */
292 8, /* maximum number of rx queues */
293 1, /* minimum number of rx queues */
294 4, /* default number of rx queues */
295 8, /* maximum number of tx queues */
296 1, /* minimum number of tx queues */
297 4, /* default number of tx queues */
298 65535, /* maximum interrupt throttle rate */
299 0, /* minimum interrupt throttle rate */
300 200, /* default interrupt throttle rate */
302 /* function pointers */
303 igb_enable_adapter_interrupts_82580,
304 igb_setup_msix_82580,
306 /* capabilities */
307 (IGB_FLAG_HAS_DCA | /* capability flags */
308 IGB_FLAG_VMDQ_POOL |
309 IGB_FLAG_NEED_CTX_IDX),
311 0xffe00000 /* mask for RXDCTL register */
314 static adapter_info_t igb_i210_cap = {
315 /* limits */
316 4, /* maximum number of rx queues */
317 1, /* minimum number of rx queues */
318 4, /* default number of rx queues */
319 4, /* maximum number of tx queues */
320 1, /* minimum number of tx queues */
321 4, /* default number of tx queues */
322 65535, /* maximum interrupt throttle rate */
323 0, /* minimum interrupt throttle rate */
324 200, /* default interrupt throttle rate */
326 /* function pointers */
327 igb_enable_adapter_interrupts_82580,
328 igb_setup_msix_82580,
330 /* capabilities */
331 (IGB_FLAG_HAS_DCA | /* capability flags */
332 IGB_FLAG_VMDQ_POOL |
333 IGB_FLAG_NEED_CTX_IDX),
335 0xfff00000 /* mask for RXDCTL register */
338 static adapter_info_t igb_i354_cap = {
339 /* limits */
340 8, /* maximum number of rx queues */
341 1, /* minimum number of rx queues */
342 4, /* default number of rx queues */
343 8, /* maximum number of tx queues */
344 1, /* minimum number of tx queues */
345 4, /* default number of tx queues */
346 65535, /* maximum interrupt throttle rate */
347 0, /* minimum interrupt throttle rate */
348 200, /* default interrupt throttle rate */
350 /* function pointers */
351 igb_enable_adapter_interrupts_82580,
352 igb_setup_msix_82580,
354 /* capabilities */
355 (IGB_FLAG_HAS_DCA | /* capability flags */
356 IGB_FLAG_VMDQ_POOL |
357 IGB_FLAG_NEED_CTX_IDX),
359 0xfff00000 /* mask for RXDCTL register */
363 * Module Initialization Functions
367 _init(void)
369 int status;
371 mac_init_ops(&igb_dev_ops, MODULE_NAME);
373 status = mod_install(&igb_modlinkage);
375 if (status != DDI_SUCCESS) {
376 mac_fini_ops(&igb_dev_ops);
379 return (status);
383 _fini(void)
385 int status;
387 status = mod_remove(&igb_modlinkage);
389 if (status == DDI_SUCCESS) {
390 mac_fini_ops(&igb_dev_ops);
393 return (status);
398 _info(struct modinfo *modinfop)
400 int status;
402 status = mod_info(&igb_modlinkage, modinfop);
404 return (status);
408 * igb_attach - driver attach
410 * This function is the device specific initialization entry
411 * point. This entry point is required and must be written.
412 * The DDI_ATTACH command must be provided in the attach entry
413 * point. When attach() is called with cmd set to DDI_ATTACH,
414 * all normal kernel services (such as kmem_alloc(9F)) are
415 * available for use by the driver.
417 * The attach() function will be called once for each instance
418 * of the device on the system with cmd set to DDI_ATTACH.
419 * Until attach() succeeds, the only driver entry points which
420 * may be called are open(9E) and getinfo(9E).
422 static int
423 igb_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd)
425 igb_t *igb;
426 struct igb_osdep *osdep;
427 struct e1000_hw *hw;
428 int instance;
431 * Check the command and perform corresponding operations
433 switch (cmd) {
434 default:
435 return (DDI_FAILURE);
437 case DDI_RESUME:
438 return (igb_resume(devinfo));
440 case DDI_ATTACH:
441 break;
444 /* Get the device instance */
445 instance = ddi_get_instance(devinfo);
447 /* Allocate memory for the instance data structure */
448 igb = kmem_zalloc(sizeof (igb_t), KM_SLEEP);
450 igb->dip = devinfo;
451 igb->instance = instance;
453 hw = &igb->hw;
454 osdep = &igb->osdep;
455 hw->back = osdep;
456 osdep->igb = igb;
458 /* Attach the instance pointer to the dev_info data structure */
459 ddi_set_driver_private(devinfo, igb);
462 /* Initialize for fma support */
463 igb->fm_capabilities = igb_get_prop(igb, "fm-capable",
464 0, 0x0f,
465 DDI_FM_EREPORT_CAPABLE | DDI_FM_ACCCHK_CAPABLE |
466 DDI_FM_DMACHK_CAPABLE | DDI_FM_ERRCB_CAPABLE);
467 igb_fm_init(igb);
468 igb->attach_progress |= ATTACH_PROGRESS_FMINIT;
471 * Map PCI config space registers
473 if (pci_config_setup(devinfo, &osdep->cfg_handle) != DDI_SUCCESS) {
474 igb_error(igb, "Failed to map PCI configurations");
475 goto attach_fail;
477 igb->attach_progress |= ATTACH_PROGRESS_PCI_CONFIG;
480 * Identify the chipset family
482 if (igb_identify_hardware(igb) != IGB_SUCCESS) {
483 igb_error(igb, "Failed to identify hardware");
484 goto attach_fail;
488 * Map device registers
490 if (igb_regs_map(igb) != IGB_SUCCESS) {
491 igb_error(igb, "Failed to map device registers");
492 goto attach_fail;
494 igb->attach_progress |= ATTACH_PROGRESS_REGS_MAP;
497 * Initialize driver parameters
499 igb_init_properties(igb);
500 igb->attach_progress |= ATTACH_PROGRESS_PROPS;
503 * Allocate interrupts
505 if (igb_alloc_intrs(igb) != IGB_SUCCESS) {
506 igb_error(igb, "Failed to allocate interrupts");
507 goto attach_fail;
509 igb->attach_progress |= ATTACH_PROGRESS_ALLOC_INTR;
512 * Allocate rx/tx rings based on the ring numbers.
513 * The actual numbers of rx/tx rings are decided by the number of
514 * allocated interrupt vectors, so we should allocate the rings after
515 * interrupts are allocated.
517 if (igb_alloc_rings(igb) != IGB_SUCCESS) {
518 igb_error(igb, "Failed to allocate rx/tx rings or groups");
519 goto attach_fail;
521 igb->attach_progress |= ATTACH_PROGRESS_ALLOC_RINGS;
524 * Add interrupt handlers
526 if (igb_add_intr_handlers(igb) != IGB_SUCCESS) {
527 igb_error(igb, "Failed to add interrupt handlers");
528 goto attach_fail;
530 igb->attach_progress |= ATTACH_PROGRESS_ADD_INTR;
533 * Initialize driver parameters
535 if (igb_init_driver_settings(igb) != IGB_SUCCESS) {
536 igb_error(igb, "Failed to initialize driver settings");
537 goto attach_fail;
540 if (igb_check_acc_handle(igb->osdep.cfg_handle) != DDI_FM_OK) {
541 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
542 goto attach_fail;
546 * Initialize mutexes for this device.
547 * Do this before enabling the interrupt handler and
548 * register the softint to avoid the condition where
549 * interrupt handler can try using uninitialized mutex
551 igb_init_locks(igb);
552 igb->attach_progress |= ATTACH_PROGRESS_LOCKS;
555 * Initialize the adapter
557 if (igb_init(igb) != IGB_SUCCESS) {
558 igb_error(igb, "Failed to initialize adapter");
559 goto attach_fail;
561 igb->attach_progress |= ATTACH_PROGRESS_INIT_ADAPTER;
564 * Initialize statistics
566 if (igb_init_stats(igb) != IGB_SUCCESS) {
567 igb_error(igb, "Failed to initialize statistics");
568 goto attach_fail;
570 igb->attach_progress |= ATTACH_PROGRESS_STATS;
573 * Register the driver to the MAC
575 if (igb_register_mac(igb) != IGB_SUCCESS) {
576 igb_error(igb, "Failed to register MAC");
577 goto attach_fail;
579 igb->attach_progress |= ATTACH_PROGRESS_MAC;
582 * Now that mutex locks are initialized, and the chip is also
583 * initialized, enable interrupts.
585 if (igb_enable_intrs(igb) != IGB_SUCCESS) {
586 igb_error(igb, "Failed to enable DDI interrupts");
587 goto attach_fail;
589 igb->attach_progress |= ATTACH_PROGRESS_ENABLE_INTR;
591 igb_log(igb, "%s", igb_version);
592 atomic_or_32(&igb->igb_state, IGB_INITIALIZED);
595 * Newer models have Energy Efficient Ethernet, let's disable this by
596 * default.
598 if (igb->hw.mac.type == e1000_i350)
599 (void) e1000_set_eee_i350(&igb->hw);
600 else if (igb->hw.mac.type == e1000_i354)
601 (void) e1000_set_eee_i354(&igb->hw);
603 return (DDI_SUCCESS);
605 attach_fail:
606 igb_unconfigure(devinfo, igb);
607 return (DDI_FAILURE);
611 * igb_detach - driver detach
613 * The detach() function is the complement of the attach routine.
614 * If cmd is set to DDI_DETACH, detach() is used to remove the
615 * state associated with a given instance of a device node
616 * prior to the removal of that instance from the system.
618 * The detach() function will be called once for each instance
619 * of the device for which there has been a successful attach()
620 * once there are no longer any opens on the device.
622 * Interrupts routine are disabled, All memory allocated by this
623 * driver are freed.
625 static int
626 igb_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd)
628 igb_t *igb;
631 * Check detach command
633 switch (cmd) {
634 default:
635 return (DDI_FAILURE);
637 case DDI_SUSPEND:
638 return (igb_suspend(devinfo));
640 case DDI_DETACH:
641 break;
646 * Get the pointer to the driver private data structure
648 igb = (igb_t *)ddi_get_driver_private(devinfo);
649 if (igb == NULL)
650 return (DDI_FAILURE);
653 * Unregister MAC. If failed, we have to fail the detach
655 if (mac_unregister(igb->mac_hdl) != 0) {
656 igb_error(igb, "Failed to unregister MAC");
657 return (DDI_FAILURE);
659 igb->attach_progress &= ~ATTACH_PROGRESS_MAC;
662 * If the device is still running, it needs to be stopped first.
663 * This check is necessary because under some specific circumstances,
664 * the detach routine can be called without stopping the interface
665 * first.
667 mutex_enter(&igb->gen_lock);
668 if (igb->igb_state & IGB_STARTED) {
669 atomic_and_32(&igb->igb_state, ~IGB_STARTED);
670 igb_stop(igb, B_TRUE);
671 mutex_exit(&igb->gen_lock);
672 /* Disable and stop the watchdog timer */
673 igb_disable_watchdog_timer(igb);
674 } else
675 mutex_exit(&igb->gen_lock);
678 * Check if there are still rx buffers held by the upper layer.
679 * If so, fail the detach.
681 if (!igb_rx_drain(igb))
682 return (DDI_FAILURE);
685 * Do the remaining unconfigure routines
687 igb_unconfigure(devinfo, igb);
689 return (DDI_SUCCESS);
693 * quiesce(9E) entry point.
695 * This function is called when the system is single-threaded at high
696 * PIL with preemption disabled. Therefore, this function must not be
697 * blocked.
699 * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
700 * DDI_FAILURE indicates an error condition and should almost never happen.
702 static int
703 igb_quiesce(dev_info_t *devinfo)
705 igb_t *igb;
706 struct e1000_hw *hw;
708 igb = (igb_t *)ddi_get_driver_private(devinfo);
710 if (igb == NULL)
711 return (DDI_FAILURE);
713 hw = &igb->hw;
716 * Disable the adapter interrupts
718 igb_disable_adapter_interrupts(igb);
720 /* Tell firmware driver is no longer in control */
721 igb_release_driver_control(hw);
724 * Reset the chipset
726 (void) e1000_reset_hw(hw);
729 * Reset PHY if possible
731 if (e1000_check_reset_block(hw) == E1000_SUCCESS)
732 (void) e1000_phy_hw_reset(hw);
734 return (DDI_SUCCESS);
738 * igb_unconfigure - release all resources held by this instance
740 static void
741 igb_unconfigure(dev_info_t *devinfo, igb_t *igb)
744 * Disable interrupt
746 if (igb->attach_progress & ATTACH_PROGRESS_ENABLE_INTR) {
747 (void) igb_disable_intrs(igb);
751 * Unregister MAC
753 if (igb->attach_progress & ATTACH_PROGRESS_MAC) {
754 (void) mac_unregister(igb->mac_hdl);
758 * Free statistics
760 if (igb->attach_progress & ATTACH_PROGRESS_STATS) {
761 kstat_delete((kstat_t *)igb->igb_ks);
765 * Remove interrupt handlers
767 if (igb->attach_progress & ATTACH_PROGRESS_ADD_INTR) {
768 igb_rem_intr_handlers(igb);
772 * Remove interrupts
774 if (igb->attach_progress & ATTACH_PROGRESS_ALLOC_INTR) {
775 igb_rem_intrs(igb);
779 * Remove driver properties
781 if (igb->attach_progress & ATTACH_PROGRESS_PROPS) {
782 (void) ddi_prop_remove_all(devinfo);
786 * Stop the adapter
788 if (igb->attach_progress & ATTACH_PROGRESS_INIT_ADAPTER) {
789 mutex_enter(&igb->gen_lock);
790 igb_stop_adapter(igb);
791 mutex_exit(&igb->gen_lock);
792 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK)
793 ddi_fm_service_impact(igb->dip, DDI_SERVICE_UNAFFECTED);
797 * Free multicast table
799 igb_release_multicast(igb);
802 * Free register handle
804 if (igb->attach_progress & ATTACH_PROGRESS_REGS_MAP) {
805 if (igb->osdep.reg_handle != NULL)
806 ddi_regs_map_free(&igb->osdep.reg_handle);
810 * Free PCI config handle
812 if (igb->attach_progress & ATTACH_PROGRESS_PCI_CONFIG) {
813 if (igb->osdep.cfg_handle != NULL)
814 pci_config_teardown(&igb->osdep.cfg_handle);
818 * Free locks
820 if (igb->attach_progress & ATTACH_PROGRESS_LOCKS) {
821 igb_destroy_locks(igb);
825 * Free the rx/tx rings
827 if (igb->attach_progress & ATTACH_PROGRESS_ALLOC_RINGS) {
828 igb_free_rings(igb);
832 * Remove FMA
834 if (igb->attach_progress & ATTACH_PROGRESS_FMINIT) {
835 igb_fm_fini(igb);
839 * Free the driver data structure
841 kmem_free(igb, sizeof (igb_t));
843 ddi_set_driver_private(devinfo, NULL);
847 * igb_register_mac - Register the driver and its function pointers with
848 * the GLD interface
850 static int
851 igb_register_mac(igb_t *igb)
853 struct e1000_hw *hw = &igb->hw;
854 mac_register_t *mac;
855 int status;
857 if ((mac = mac_alloc(MAC_VERSION)) == NULL)
858 return (IGB_FAILURE);
860 mac->m_type_ident = MAC_PLUGIN_IDENT_ETHER;
861 mac->m_driver = igb;
862 mac->m_dip = igb->dip;
863 mac->m_src_addr = hw->mac.addr;
864 mac->m_callbacks = &igb_m_callbacks;
865 mac->m_min_sdu = 0;
866 mac->m_max_sdu = igb->max_frame_size -
867 sizeof (struct ether_vlan_header) - ETHERFCSL;
868 mac->m_margin = VLAN_TAGSZ;
869 mac->m_priv_props = igb_priv_props;
870 mac->m_v12n = MAC_VIRT_LEVEL1;
872 status = mac_register(mac, &igb->mac_hdl);
874 mac_free(mac);
876 return ((status == 0) ? IGB_SUCCESS : IGB_FAILURE);
880 * igb_identify_hardware - Identify the type of the chipset
882 static int
883 igb_identify_hardware(igb_t *igb)
885 struct e1000_hw *hw = &igb->hw;
886 struct igb_osdep *osdep = &igb->osdep;
889 * Get the device id
891 hw->vendor_id =
892 pci_config_get16(osdep->cfg_handle, PCI_CONF_VENID);
893 hw->device_id =
894 pci_config_get16(osdep->cfg_handle, PCI_CONF_DEVID);
895 hw->revision_id =
896 pci_config_get8(osdep->cfg_handle, PCI_CONF_REVID);
897 hw->subsystem_device_id =
898 pci_config_get16(osdep->cfg_handle, PCI_CONF_SUBSYSID);
899 hw->subsystem_vendor_id =
900 pci_config_get16(osdep->cfg_handle, PCI_CONF_SUBVENID);
903 * Set the mac type of the adapter based on the device id
905 if (e1000_set_mac_type(hw) != E1000_SUCCESS) {
906 return (IGB_FAILURE);
910 * Install adapter capabilities based on mac type
912 switch (hw->mac.type) {
913 case e1000_82575:
914 igb->capab = &igb_82575_cap;
915 break;
916 case e1000_82576:
917 igb->capab = &igb_82576_cap;
918 break;
919 case e1000_82580:
920 igb->capab = &igb_82580_cap;
921 break;
922 case e1000_i350:
923 igb->capab = &igb_i350_cap;
924 break;
925 case e1000_i210:
926 case e1000_i211:
927 igb->capab = &igb_i210_cap;
928 break;
929 case e1000_i354:
930 igb->capab = &igb_i354_cap;
931 break;
932 default:
933 return (IGB_FAILURE);
936 return (IGB_SUCCESS);
940 * igb_regs_map - Map the device registers
942 static int
943 igb_regs_map(igb_t *igb)
945 dev_info_t *devinfo = igb->dip;
946 struct e1000_hw *hw = &igb->hw;
947 struct igb_osdep *osdep = &igb->osdep;
948 off_t mem_size;
951 * First get the size of device registers to be mapped.
953 if (ddi_dev_regsize(devinfo, IGB_ADAPTER_REGSET, &mem_size) !=
954 DDI_SUCCESS) {
955 return (IGB_FAILURE);
959 * Call ddi_regs_map_setup() to map registers
961 if ((ddi_regs_map_setup(devinfo, IGB_ADAPTER_REGSET,
962 (caddr_t *)&hw->hw_addr, 0,
963 mem_size, &igb_regs_acc_attr,
964 &osdep->reg_handle)) != DDI_SUCCESS) {
965 return (IGB_FAILURE);
968 return (IGB_SUCCESS);
972 * igb_init_properties - Initialize driver properties
974 static void
975 igb_init_properties(igb_t *igb)
978 * Get conf file properties, including link settings
979 * jumbo frames, ring number, descriptor number, etc.
981 igb_get_conf(igb);
985 * igb_init_driver_settings - Initialize driver settings
987 * The settings include hardware function pointers, bus information,
988 * rx/tx rings settings, link state, and any other parameters that
989 * need to be setup during driver initialization.
991 static int
992 igb_init_driver_settings(igb_t *igb)
994 struct e1000_hw *hw = &igb->hw;
995 igb_rx_ring_t *rx_ring;
996 igb_tx_ring_t *tx_ring;
997 uint32_t rx_size;
998 uint32_t tx_size;
999 int i;
1002 * Initialize chipset specific hardware function pointers
1004 if (e1000_setup_init_funcs(hw, B_TRUE) != E1000_SUCCESS) {
1005 return (IGB_FAILURE);
1009 * Get bus information
1011 if (e1000_get_bus_info(hw) != E1000_SUCCESS) {
1012 return (IGB_FAILURE);
1016 * Get the system page size
1018 igb->page_size = ddi_ptob(igb->dip, (ulong_t)1);
1021 * Set rx buffer size
1022 * The IP header alignment room is counted in the calculation.
1023 * The rx buffer size is in unit of 1K that is required by the
1024 * chipset hardware.
1026 rx_size = igb->max_frame_size + IPHDR_ALIGN_ROOM;
1027 igb->rx_buf_size = ((rx_size >> 10) +
1028 ((rx_size & (((uint32_t)1 << 10) - 1)) > 0 ? 1 : 0)) << 10;
1031 * Set tx buffer size
1033 tx_size = igb->max_frame_size;
1034 igb->tx_buf_size = ((tx_size >> 10) +
1035 ((tx_size & (((uint32_t)1 << 10) - 1)) > 0 ? 1 : 0)) << 10;
1038 * Initialize rx/tx rings parameters
1040 for (i = 0; i < igb->num_rx_rings; i++) {
1041 rx_ring = &igb->rx_rings[i];
1042 rx_ring->index = i;
1043 rx_ring->igb = igb;
1046 for (i = 0; i < igb->num_tx_rings; i++) {
1047 tx_ring = &igb->tx_rings[i];
1048 tx_ring->index = i;
1049 tx_ring->igb = igb;
1050 if (igb->tx_head_wb_enable)
1051 tx_ring->tx_recycle = igb_tx_recycle_head_wb;
1052 else
1053 tx_ring->tx_recycle = igb_tx_recycle_legacy;
1055 tx_ring->ring_size = igb->tx_ring_size;
1056 tx_ring->free_list_size = igb->tx_ring_size +
1057 (igb->tx_ring_size >> 1);
1061 * Initialize values of interrupt throttling rates
1063 for (i = 1; i < MAX_NUM_EITR; i++)
1064 igb->intr_throttling[i] = igb->intr_throttling[0];
1067 * The initial link state should be "unknown"
1069 igb->link_state = LINK_STATE_UNKNOWN;
1071 return (IGB_SUCCESS);
1075 * igb_init_locks - Initialize locks
1077 static void
1078 igb_init_locks(igb_t *igb)
1080 igb_rx_ring_t *rx_ring;
1081 igb_tx_ring_t *tx_ring;
1082 int i;
1084 for (i = 0; i < igb->num_rx_rings; i++) {
1085 rx_ring = &igb->rx_rings[i];
1086 mutex_init(&rx_ring->rx_lock, NULL,
1087 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1090 for (i = 0; i < igb->num_tx_rings; i++) {
1091 tx_ring = &igb->tx_rings[i];
1092 mutex_init(&tx_ring->tx_lock, NULL,
1093 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1094 mutex_init(&tx_ring->recycle_lock, NULL,
1095 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1096 mutex_init(&tx_ring->tcb_head_lock, NULL,
1097 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1098 mutex_init(&tx_ring->tcb_tail_lock, NULL,
1099 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1102 mutex_init(&igb->gen_lock, NULL,
1103 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1105 mutex_init(&igb->watchdog_lock, NULL,
1106 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1108 mutex_init(&igb->link_lock, NULL,
1109 MUTEX_DRIVER, DDI_INTR_PRI(igb->intr_pri));
1113 * igb_destroy_locks - Destroy locks
1115 static void
1116 igb_destroy_locks(igb_t *igb)
1118 igb_rx_ring_t *rx_ring;
1119 igb_tx_ring_t *tx_ring;
1120 int i;
1122 for (i = 0; i < igb->num_rx_rings; i++) {
1123 rx_ring = &igb->rx_rings[i];
1124 mutex_destroy(&rx_ring->rx_lock);
1127 for (i = 0; i < igb->num_tx_rings; i++) {
1128 tx_ring = &igb->tx_rings[i];
1129 mutex_destroy(&tx_ring->tx_lock);
1130 mutex_destroy(&tx_ring->recycle_lock);
1131 mutex_destroy(&tx_ring->tcb_head_lock);
1132 mutex_destroy(&tx_ring->tcb_tail_lock);
1135 mutex_destroy(&igb->gen_lock);
1136 mutex_destroy(&igb->watchdog_lock);
1137 mutex_destroy(&igb->link_lock);
1140 static int
1141 igb_resume(dev_info_t *devinfo)
1143 igb_t *igb;
1145 igb = (igb_t *)ddi_get_driver_private(devinfo);
1146 if (igb == NULL)
1147 return (DDI_FAILURE);
1149 mutex_enter(&igb->gen_lock);
1152 * Enable interrupts
1154 if (igb->attach_progress & ATTACH_PROGRESS_ENABLE_INTR) {
1155 if (igb_enable_intrs(igb) != IGB_SUCCESS) {
1156 igb_error(igb, "Failed to enable DDI interrupts");
1157 mutex_exit(&igb->gen_lock);
1158 return (DDI_FAILURE);
1162 if (igb->igb_state & IGB_STARTED) {
1163 if (igb_start(igb, B_FALSE) != IGB_SUCCESS) {
1164 mutex_exit(&igb->gen_lock);
1165 return (DDI_FAILURE);
1169 * Enable and start the watchdog timer
1171 igb_enable_watchdog_timer(igb);
1174 atomic_and_32(&igb->igb_state, ~IGB_SUSPENDED);
1176 mutex_exit(&igb->gen_lock);
1178 return (DDI_SUCCESS);
1181 static int
1182 igb_suspend(dev_info_t *devinfo)
1184 igb_t *igb;
1186 igb = (igb_t *)ddi_get_driver_private(devinfo);
1187 if (igb == NULL)
1188 return (DDI_FAILURE);
1190 mutex_enter(&igb->gen_lock);
1192 atomic_or_32(&igb->igb_state, IGB_SUSPENDED);
1195 * Disable interrupts
1197 if (igb->attach_progress & ATTACH_PROGRESS_ENABLE_INTR) {
1198 (void) igb_disable_intrs(igb);
1201 if (!(igb->igb_state & IGB_STARTED)) {
1202 mutex_exit(&igb->gen_lock);
1203 return (DDI_SUCCESS);
1206 igb_stop(igb, B_FALSE);
1208 mutex_exit(&igb->gen_lock);
1211 * Disable and stop the watchdog timer
1213 igb_disable_watchdog_timer(igb);
1215 return (DDI_SUCCESS);
1218 static int
1219 igb_init(igb_t *igb)
1221 mutex_enter(&igb->gen_lock);
1224 * Initilize the adapter
1226 if (igb_init_adapter(igb) != IGB_SUCCESS) {
1227 mutex_exit(&igb->gen_lock);
1228 igb_fm_ereport(igb, DDI_FM_DEVICE_INVAL_STATE);
1229 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
1230 return (IGB_FAILURE);
1233 mutex_exit(&igb->gen_lock);
1235 return (IGB_SUCCESS);
1239 * igb_init_mac_address - Initialize the default MAC address
1241 * On success, the MAC address is entered in the igb->hw.mac.addr
1242 * and hw->mac.perm_addr fields and the adapter's RAR(0) receive
1243 * address register.
1245 * Important side effects:
1246 * 1. adapter is reset - this is required to put it in a known state.
1247 * 2. all of non-volatile memory (NVM) is read & checksummed - NVM is where
1248 * MAC address and all default settings are stored, so a valid checksum
1249 * is required.
1251 static int
1252 igb_init_mac_address(igb_t *igb)
1254 struct e1000_hw *hw = &igb->hw;
1256 ASSERT(mutex_owned(&igb->gen_lock));
1259 * Reset chipset to put the hardware in a known state
1260 * before we try to get MAC address from NVM.
1262 if (e1000_reset_hw(hw) != E1000_SUCCESS) {
1263 igb_error(igb, "Adapter reset failed.");
1264 goto init_mac_fail;
1268 * NVM validation
1270 if (((igb->hw.mac.type != e1000_i210) &&
1271 (igb->hw.mac.type != e1000_i211)) &&
1272 (e1000_validate_nvm_checksum(hw) < 0)) {
1274 * Some PCI-E parts fail the first check due to
1275 * the link being in sleep state. Call it again,
1276 * if it fails a second time its a real issue.
1278 if (e1000_validate_nvm_checksum(hw) < 0) {
1279 igb_error(igb,
1280 "Invalid NVM checksum. Please contact "
1281 "the vendor to update the NVM.");
1282 goto init_mac_fail;
1287 * Get the mac address
1288 * This function should handle SPARC case correctly.
1290 if (!igb_find_mac_address(igb)) {
1291 igb_error(igb, "Failed to get the mac address");
1292 goto init_mac_fail;
1295 /* Validate mac address */
1296 if (!is_valid_mac_addr(hw->mac.addr)) {
1297 igb_error(igb, "Invalid mac address");
1298 goto init_mac_fail;
1301 return (IGB_SUCCESS);
1303 init_mac_fail:
1304 return (IGB_FAILURE);
1308 * igb_init_adapter - Initialize the adapter
1310 static int
1311 igb_init_adapter(igb_t *igb)
1313 struct e1000_hw *hw = &igb->hw;
1314 uint32_t pba;
1315 int oemid[2];
1316 uint16_t nvmword;
1317 uint32_t hwm;
1318 uint32_t default_mtu;
1319 u8 pbanum[E1000_PBANUM_LENGTH];
1320 char eepromver[5]; /* f.ff */
1321 int i;
1323 ASSERT(mutex_owned(&igb->gen_lock));
1326 * In order to obtain the default MAC address, this will reset the
1327 * adapter and validate the NVM that the address and many other
1328 * default settings come from.
1330 if (igb_init_mac_address(igb) != IGB_SUCCESS) {
1331 igb_error(igb, "Failed to initialize MAC address");
1332 goto init_adapter_fail;
1336 * Packet Buffer Allocation (PBA)
1337 * Writing PBA sets the receive portion of the buffer
1338 * the remainder is used for the transmit buffer.
1340 switch (hw->mac.type) {
1341 case e1000_82575:
1342 pba = E1000_PBA_32K;
1343 break;
1344 case e1000_82576:
1345 pba = E1000_READ_REG(hw, E1000_RXPBS);
1346 pba &= E1000_RXPBS_SIZE_MASK_82576;
1347 break;
1348 case e1000_82580:
1349 case e1000_i350:
1350 case e1000_i354:
1351 pba = E1000_READ_REG(hw, E1000_RXPBS);
1352 pba = e1000_rxpbs_adjust_82580(pba);
1353 break;
1354 case e1000_i210:
1355 case e1000_i211:
1356 pba = E1000_PBA_34K;
1357 default:
1358 break;
1361 /* Special needs in case of Jumbo frames */
1362 default_mtu = igb_get_prop(igb, PROP_DEFAULT_MTU,
1363 MIN_MTU, MAX_MTU, DEFAULT_MTU);
1364 if ((hw->mac.type == e1000_82575) && (default_mtu > ETHERMTU)) {
1365 u32 tx_space, min_tx, min_rx;
1366 pba = E1000_READ_REG(hw, E1000_PBA);
1367 tx_space = pba >> 16;
1368 pba &= 0xffff;
1369 min_tx = (igb->max_frame_size +
1370 sizeof (struct e1000_tx_desc) - ETHERNET_FCS_SIZE) * 2;
1371 min_tx = roundup(min_tx, 1024);
1372 min_tx >>= 10;
1373 min_rx = igb->max_frame_size;
1374 min_rx = roundup(min_rx, 1024);
1375 min_rx >>= 10;
1376 if (tx_space < min_tx &&
1377 ((min_tx - tx_space) < pba)) {
1378 pba = pba - (min_tx - tx_space);
1380 * if short on rx space, rx wins
1381 * and must trump tx adjustment
1383 if (pba < min_rx)
1384 pba = min_rx;
1386 E1000_WRITE_REG(hw, E1000_PBA, pba);
1389 DEBUGOUT1("igb_init: pba=%dK", pba);
1392 * These parameters control the automatic generation (Tx) and
1393 * response (Rx) to Ethernet PAUSE frames.
1394 * - High water mark should allow for at least two frames to be
1395 * received after sending an XOFF.
1396 * - Low water mark works best when it is very near the high water mark.
1397 * This allows the receiver to restart by sending XON when it has
1398 * drained a bit.
1400 hwm = min(((pba << 10) * 9 / 10),
1401 ((pba << 10) - 2 * igb->max_frame_size));
1403 if (hw->mac.type < e1000_82576) {
1404 hw->fc.high_water = hwm & 0xFFF8; /* 8-byte granularity */
1405 hw->fc.low_water = hw->fc.high_water - 8;
1406 } else {
1407 hw->fc.high_water = hwm & 0xFFF0; /* 16-byte granularity */
1408 hw->fc.low_water = hw->fc.high_water - 16;
1411 hw->fc.pause_time = E1000_FC_PAUSE_TIME;
1412 hw->fc.send_xon = B_TRUE;
1414 (void) e1000_validate_mdi_setting(hw);
1417 * Reset the chipset hardware the second time to put PBA settings
1418 * into effect.
1420 if (e1000_reset_hw(hw) != E1000_SUCCESS) {
1421 igb_error(igb, "Second reset failed");
1422 goto init_adapter_fail;
1426 * Don't wait for auto-negotiation to complete
1428 hw->phy.autoneg_wait_to_complete = B_FALSE;
1431 * Copper options
1433 if (hw->phy.media_type == e1000_media_type_copper) {
1434 hw->phy.mdix = 0; /* AUTO_ALL_MODES */
1435 hw->phy.disable_polarity_correction = B_FALSE;
1436 hw->phy.ms_type = e1000_ms_hw_default; /* E1000_MASTER_SLAVE */
1440 * Initialize link settings
1442 (void) igb_setup_link(igb, B_FALSE);
1445 * Configure/Initialize hardware
1447 if (e1000_init_hw(hw) != E1000_SUCCESS) {
1448 igb_error(igb, "Failed to initialize hardware");
1449 goto init_adapter_fail;
1453 * Start the link setup timer
1455 igb_start_link_timer(igb);
1458 * Disable wakeup control by default
1460 E1000_WRITE_REG(hw, E1000_WUC, 0);
1463 * Record phy info in hw struct
1465 (void) e1000_get_phy_info(hw);
1468 * Make sure driver has control
1470 igb_get_driver_control(hw);
1473 * Restore LED settings to the default from EEPROM
1474 * to meet the standard for Sun platforms.
1476 (void) e1000_cleanup_led(hw);
1479 * Setup MSI-X interrupts
1481 if (igb->intr_type == DDI_INTR_TYPE_MSIX)
1482 igb->capab->setup_msix(igb);
1485 * Initialize unicast addresses.
1487 igb_init_unicst(igb);
1490 * Setup and initialize the mctable structures.
1492 igb_setup_multicst(igb);
1495 * Set interrupt throttling rate
1497 for (i = 0; i < igb->intr_cnt; i++)
1498 E1000_WRITE_REG(hw, E1000_EITR(i), igb->intr_throttling[i]);
1501 * Read identifying information and place in devinfo.
1503 nvmword = 0xffff;
1504 (void) e1000_read_nvm(&igb->hw, NVM_OEM_OFFSET_0, 1, &nvmword);
1505 oemid[0] = (int)nvmword;
1506 (void) e1000_read_nvm(&igb->hw, NVM_OEM_OFFSET_1, 1, &nvmword);
1507 oemid[1] = (int)nvmword;
1508 (void) ddi_prop_update_int_array(DDI_DEV_T_NONE, igb->dip,
1509 "oem-identifier", oemid, 2);
1511 pbanum[0] = '\0';
1512 (void) e1000_read_pba_string(&igb->hw, pbanum, sizeof (pbanum));
1513 if (*pbanum != '\0') {
1514 (void) ddi_prop_update_string(DDI_DEV_T_NONE, igb->dip,
1515 "printed-board-assembly", (char *)pbanum);
1518 nvmword = 0xffff;
1519 (void) e1000_read_nvm(&igb->hw, NVM_VERSION, 1, &nvmword);
1520 if ((nvmword & 0xf00) == 0) {
1521 (void) snprintf(eepromver, sizeof (eepromver), "%x.%x",
1522 (nvmword & 0xf000) >> 12, (nvmword & 0xff));
1523 (void) ddi_prop_update_string(DDI_DEV_T_NONE, igb->dip,
1524 "nvm-version", eepromver);
1528 * Save the state of the phy
1530 igb_get_phy_state(igb);
1532 igb_param_sync(igb);
1534 return (IGB_SUCCESS);
1536 init_adapter_fail:
1538 * Reset PHY if possible
1540 if (e1000_check_reset_block(hw) == E1000_SUCCESS)
1541 (void) e1000_phy_hw_reset(hw);
1543 return (IGB_FAILURE);
1547 * igb_stop_adapter - Stop the adapter
1549 static void
1550 igb_stop_adapter(igb_t *igb)
1552 struct e1000_hw *hw = &igb->hw;
1554 ASSERT(mutex_owned(&igb->gen_lock));
1556 /* Stop the link setup timer */
1557 igb_stop_link_timer(igb);
1559 /* Tell firmware driver is no longer in control */
1560 igb_release_driver_control(hw);
1563 * Reset the chipset
1565 if (e1000_reset_hw(hw) != E1000_SUCCESS) {
1566 igb_fm_ereport(igb, DDI_FM_DEVICE_INVAL_STATE);
1567 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
1571 * e1000_phy_hw_reset is not needed here, MAC reset above is sufficient
1576 * igb_reset - Reset the chipset and restart the driver.
1578 * It involves stopping and re-starting the chipset,
1579 * and re-configuring the rx/tx rings.
1581 static int
1582 igb_reset(igb_t *igb)
1584 int i;
1586 mutex_enter(&igb->gen_lock);
1588 ASSERT(igb->igb_state & IGB_STARTED);
1589 atomic_and_32(&igb->igb_state, ~IGB_STARTED);
1592 * Disable the adapter interrupts to stop any rx/tx activities
1593 * before draining pending data and resetting hardware.
1595 igb_disable_adapter_interrupts(igb);
1598 * Drain the pending transmit packets
1600 (void) igb_tx_drain(igb);
1602 for (i = 0; i < igb->num_rx_rings; i++)
1603 mutex_enter(&igb->rx_rings[i].rx_lock);
1604 for (i = 0; i < igb->num_tx_rings; i++)
1605 mutex_enter(&igb->tx_rings[i].tx_lock);
1608 * Stop the adapter
1610 igb_stop_adapter(igb);
1613 * Clean the pending tx data/resources
1615 igb_tx_clean(igb);
1618 * Start the adapter
1620 if (igb_init_adapter(igb) != IGB_SUCCESS) {
1621 igb_fm_ereport(igb, DDI_FM_DEVICE_INVAL_STATE);
1622 goto reset_failure;
1626 * Setup the rx/tx rings
1628 igb->tx_ring_init = B_FALSE;
1629 igb_setup_rings(igb);
1631 atomic_and_32(&igb->igb_state, ~(IGB_ERROR | IGB_STALL));
1634 * Enable adapter interrupts
1635 * The interrupts must be enabled after the driver state is START
1637 igb->capab->enable_intr(igb);
1639 if (igb_check_acc_handle(igb->osdep.cfg_handle) != DDI_FM_OK)
1640 goto reset_failure;
1642 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK)
1643 goto reset_failure;
1645 for (i = igb->num_tx_rings - 1; i >= 0; i--)
1646 mutex_exit(&igb->tx_rings[i].tx_lock);
1647 for (i = igb->num_rx_rings - 1; i >= 0; i--)
1648 mutex_exit(&igb->rx_rings[i].rx_lock);
1650 atomic_or_32(&igb->igb_state, IGB_STARTED);
1652 mutex_exit(&igb->gen_lock);
1654 return (IGB_SUCCESS);
1656 reset_failure:
1657 for (i = igb->num_tx_rings - 1; i >= 0; i--)
1658 mutex_exit(&igb->tx_rings[i].tx_lock);
1659 for (i = igb->num_rx_rings - 1; i >= 0; i--)
1660 mutex_exit(&igb->rx_rings[i].rx_lock);
1662 mutex_exit(&igb->gen_lock);
1664 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
1666 return (IGB_FAILURE);
1670 * igb_tx_clean - Clean the pending transmit packets and DMA resources
1672 static void
1673 igb_tx_clean(igb_t *igb)
1675 igb_tx_ring_t *tx_ring;
1676 tx_control_block_t *tcb;
1677 link_list_t pending_list;
1678 uint32_t desc_num;
1679 int i, j;
1681 LINK_LIST_INIT(&pending_list);
1683 for (i = 0; i < igb->num_tx_rings; i++) {
1684 tx_ring = &igb->tx_rings[i];
1686 mutex_enter(&tx_ring->recycle_lock);
1689 * Clean the pending tx data - the pending packets in the
1690 * work_list that have no chances to be transmitted again.
1692 * We must ensure the chipset is stopped or the link is down
1693 * before cleaning the transmit packets.
1695 desc_num = 0;
1696 for (j = 0; j < tx_ring->ring_size; j++) {
1697 tcb = tx_ring->work_list[j];
1698 if (tcb != NULL) {
1699 desc_num += tcb->desc_num;
1701 tx_ring->work_list[j] = NULL;
1703 igb_free_tcb(tcb);
1705 LIST_PUSH_TAIL(&pending_list, &tcb->link);
1709 if (desc_num > 0) {
1710 atomic_add_32(&tx_ring->tbd_free, desc_num);
1711 ASSERT(tx_ring->tbd_free == tx_ring->ring_size);
1714 * Reset the head and tail pointers of the tbd ring;
1715 * Reset the head write-back if it is enabled.
1717 tx_ring->tbd_head = 0;
1718 tx_ring->tbd_tail = 0;
1719 if (igb->tx_head_wb_enable)
1720 *tx_ring->tbd_head_wb = 0;
1722 E1000_WRITE_REG(&igb->hw, E1000_TDH(tx_ring->index), 0);
1723 E1000_WRITE_REG(&igb->hw, E1000_TDT(tx_ring->index), 0);
1726 mutex_exit(&tx_ring->recycle_lock);
1729 * Add the tx control blocks in the pending list to
1730 * the free list.
1732 igb_put_free_list(tx_ring, &pending_list);
1737 * igb_tx_drain - Drain the tx rings to allow pending packets to be transmitted
1739 static boolean_t
1740 igb_tx_drain(igb_t *igb)
1742 igb_tx_ring_t *tx_ring;
1743 boolean_t done;
1744 int i, j;
1747 * Wait for a specific time to allow pending tx packets
1748 * to be transmitted.
1750 * Check the counter tbd_free to see if transmission is done.
1751 * No lock protection is needed here.
1753 * Return B_TRUE if all pending packets have been transmitted;
1754 * Otherwise return B_FALSE;
1756 for (i = 0; i < TX_DRAIN_TIME; i++) {
1758 done = B_TRUE;
1759 for (j = 0; j < igb->num_tx_rings; j++) {
1760 tx_ring = &igb->tx_rings[j];
1761 done = done &&
1762 (tx_ring->tbd_free == tx_ring->ring_size);
1765 if (done)
1766 break;
1768 msec_delay(1);
1771 return (done);
1775 * igb_rx_drain - Wait for all rx buffers to be released by upper layer
1777 static boolean_t
1778 igb_rx_drain(igb_t *igb)
1780 boolean_t done;
1781 int i;
1784 * Polling the rx free list to check if those rx buffers held by
1785 * the upper layer are released.
1787 * Check the counter rcb_free to see if all pending buffers are
1788 * released. No lock protection is needed here.
1790 * Return B_TRUE if all pending buffers have been released;
1791 * Otherwise return B_FALSE;
1793 for (i = 0; i < RX_DRAIN_TIME; i++) {
1794 done = (igb->rcb_pending == 0);
1796 if (done)
1797 break;
1799 msec_delay(1);
1802 return (done);
1806 * igb_start - Start the driver/chipset
1809 igb_start(igb_t *igb, boolean_t alloc_buffer)
1811 int i;
1813 ASSERT(mutex_owned(&igb->gen_lock));
1815 if (alloc_buffer) {
1816 if (igb_alloc_rx_data(igb) != IGB_SUCCESS) {
1817 igb_error(igb,
1818 "Failed to allocate software receive rings");
1819 return (IGB_FAILURE);
1822 /* Allocate buffers for all the rx/tx rings */
1823 if (igb_alloc_dma(igb) != IGB_SUCCESS) {
1824 igb_error(igb, "Failed to allocate DMA resource");
1825 return (IGB_FAILURE);
1828 igb->tx_ring_init = B_TRUE;
1829 } else {
1830 igb->tx_ring_init = B_FALSE;
1833 for (i = 0; i < igb->num_rx_rings; i++)
1834 mutex_enter(&igb->rx_rings[i].rx_lock);
1835 for (i = 0; i < igb->num_tx_rings; i++)
1836 mutex_enter(&igb->tx_rings[i].tx_lock);
1839 * Start the adapter
1841 if ((igb->attach_progress & ATTACH_PROGRESS_INIT_ADAPTER) == 0) {
1842 if (igb_init_adapter(igb) != IGB_SUCCESS) {
1843 igb_fm_ereport(igb, DDI_FM_DEVICE_INVAL_STATE);
1844 goto start_failure;
1846 igb->attach_progress |= ATTACH_PROGRESS_INIT_ADAPTER;
1850 * Setup the rx/tx rings
1852 igb_setup_rings(igb);
1855 * Enable adapter interrupts
1856 * The interrupts must be enabled after the driver state is START
1858 igb->capab->enable_intr(igb);
1860 if (igb_check_acc_handle(igb->osdep.cfg_handle) != DDI_FM_OK)
1861 goto start_failure;
1863 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK)
1864 goto start_failure;
1866 if (igb->hw.mac.type == e1000_i350)
1867 (void) e1000_set_eee_i350(&igb->hw);
1868 else if (igb->hw.mac.type == e1000_i354)
1869 (void) e1000_set_eee_i354(&igb->hw);
1871 for (i = igb->num_tx_rings - 1; i >= 0; i--)
1872 mutex_exit(&igb->tx_rings[i].tx_lock);
1873 for (i = igb->num_rx_rings - 1; i >= 0; i--)
1874 mutex_exit(&igb->rx_rings[i].rx_lock);
1876 return (IGB_SUCCESS);
1878 start_failure:
1879 for (i = igb->num_tx_rings - 1; i >= 0; i--)
1880 mutex_exit(&igb->tx_rings[i].tx_lock);
1881 for (i = igb->num_rx_rings - 1; i >= 0; i--)
1882 mutex_exit(&igb->rx_rings[i].rx_lock);
1884 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
1886 return (IGB_FAILURE);
1890 * igb_stop - Stop the driver/chipset
1892 void
1893 igb_stop(igb_t *igb, boolean_t free_buffer)
1895 int i;
1897 ASSERT(mutex_owned(&igb->gen_lock));
1899 igb->attach_progress &= ~ATTACH_PROGRESS_INIT_ADAPTER;
1902 * Disable the adapter interrupts
1904 igb_disable_adapter_interrupts(igb);
1907 * Drain the pending tx packets
1909 (void) igb_tx_drain(igb);
1911 for (i = 0; i < igb->num_rx_rings; i++)
1912 mutex_enter(&igb->rx_rings[i].rx_lock);
1913 for (i = 0; i < igb->num_tx_rings; i++)
1914 mutex_enter(&igb->tx_rings[i].tx_lock);
1917 * Stop the adapter
1919 igb_stop_adapter(igb);
1922 * Clean the pending tx data/resources
1924 igb_tx_clean(igb);
1926 for (i = igb->num_tx_rings - 1; i >= 0; i--)
1927 mutex_exit(&igb->tx_rings[i].tx_lock);
1928 for (i = igb->num_rx_rings - 1; i >= 0; i--)
1929 mutex_exit(&igb->rx_rings[i].rx_lock);
1931 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK)
1932 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
1934 if (igb->link_state == LINK_STATE_UP) {
1935 igb->link_state = LINK_STATE_UNKNOWN;
1936 mac_link_update(igb->mac_hdl, igb->link_state);
1939 if (free_buffer) {
1941 * Release the DMA/memory resources of rx/tx rings
1943 igb_free_dma(igb);
1944 igb_free_rx_data(igb);
1949 * igb_alloc_rings - Allocate memory space for rx/tx rings
1951 static int
1952 igb_alloc_rings(igb_t *igb)
1955 * Allocate memory space for rx rings
1957 igb->rx_rings = kmem_zalloc(
1958 sizeof (igb_rx_ring_t) * igb->num_rx_rings,
1959 KM_NOSLEEP);
1961 if (igb->rx_rings == NULL) {
1962 return (IGB_FAILURE);
1966 * Allocate memory space for tx rings
1968 igb->tx_rings = kmem_zalloc(
1969 sizeof (igb_tx_ring_t) * igb->num_tx_rings,
1970 KM_NOSLEEP);
1972 if (igb->tx_rings == NULL) {
1973 kmem_free(igb->rx_rings,
1974 sizeof (igb_rx_ring_t) * igb->num_rx_rings);
1975 igb->rx_rings = NULL;
1976 return (IGB_FAILURE);
1980 * Allocate memory space for rx ring groups
1982 igb->rx_groups = kmem_zalloc(
1983 sizeof (igb_rx_group_t) * igb->num_rx_groups,
1984 KM_NOSLEEP);
1986 if (igb->rx_groups == NULL) {
1987 kmem_free(igb->rx_rings,
1988 sizeof (igb_rx_ring_t) * igb->num_rx_rings);
1989 kmem_free(igb->tx_rings,
1990 sizeof (igb_tx_ring_t) * igb->num_tx_rings);
1991 igb->rx_rings = NULL;
1992 igb->tx_rings = NULL;
1993 return (IGB_FAILURE);
1996 return (IGB_SUCCESS);
2000 * igb_free_rings - Free the memory space of rx/tx rings.
2002 static void
2003 igb_free_rings(igb_t *igb)
2005 if (igb->rx_rings != NULL) {
2006 kmem_free(igb->rx_rings,
2007 sizeof (igb_rx_ring_t) * igb->num_rx_rings);
2008 igb->rx_rings = NULL;
2011 if (igb->tx_rings != NULL) {
2012 kmem_free(igb->tx_rings,
2013 sizeof (igb_tx_ring_t) * igb->num_tx_rings);
2014 igb->tx_rings = NULL;
2017 if (igb->rx_groups != NULL) {
2018 kmem_free(igb->rx_groups,
2019 sizeof (igb_rx_group_t) * igb->num_rx_groups);
2020 igb->rx_groups = NULL;
2024 static int
2025 igb_alloc_rx_data(igb_t *igb)
2027 igb_rx_ring_t *rx_ring;
2028 int i;
2030 for (i = 0; i < igb->num_rx_rings; i++) {
2031 rx_ring = &igb->rx_rings[i];
2032 if (igb_alloc_rx_ring_data(rx_ring) != IGB_SUCCESS)
2033 goto alloc_rx_rings_failure;
2035 return (IGB_SUCCESS);
2037 alloc_rx_rings_failure:
2038 igb_free_rx_data(igb);
2039 return (IGB_FAILURE);
2042 static void
2043 igb_free_rx_data(igb_t *igb)
2045 igb_rx_ring_t *rx_ring;
2046 igb_rx_data_t *rx_data;
2047 int i;
2049 for (i = 0; i < igb->num_rx_rings; i++) {
2050 rx_ring = &igb->rx_rings[i];
2052 mutex_enter(&igb->rx_pending_lock);
2053 rx_data = rx_ring->rx_data;
2055 if (rx_data != NULL) {
2056 rx_data->flag |= IGB_RX_STOPPED;
2058 if (rx_data->rcb_pending == 0) {
2059 igb_free_rx_ring_data(rx_data);
2060 rx_ring->rx_data = NULL;
2064 mutex_exit(&igb->rx_pending_lock);
2069 * igb_setup_rings - Setup rx/tx rings
2071 static void
2072 igb_setup_rings(igb_t *igb)
2075 * Setup the rx/tx rings, including the following:
2077 * 1. Setup the descriptor ring and the control block buffers;
2078 * 2. Initialize necessary registers for receive/transmit;
2079 * 3. Initialize software pointers/parameters for receive/transmit;
2081 igb_setup_rx(igb);
2083 igb_setup_tx(igb);
2086 static void
2087 igb_setup_rx_ring(igb_rx_ring_t *rx_ring)
2089 igb_t *igb = rx_ring->igb;
2090 igb_rx_data_t *rx_data = rx_ring->rx_data;
2091 struct e1000_hw *hw = &igb->hw;
2092 rx_control_block_t *rcb;
2093 union e1000_adv_rx_desc *rbd;
2094 uint32_t size;
2095 uint32_t buf_low;
2096 uint32_t buf_high;
2097 uint32_t rxdctl;
2098 int i;
2100 ASSERT(mutex_owned(&rx_ring->rx_lock));
2101 ASSERT(mutex_owned(&igb->gen_lock));
2104 * Initialize descriptor ring with buffer addresses
2106 for (i = 0; i < igb->rx_ring_size; i++) {
2107 rcb = rx_data->work_list[i];
2108 rbd = &rx_data->rbd_ring[i];
2110 rbd->read.pkt_addr = rcb->rx_buf.dma_address;
2111 rbd->read.hdr_addr = NULL;
2115 * Initialize the base address registers
2117 buf_low = (uint32_t)rx_data->rbd_area.dma_address;
2118 buf_high = (uint32_t)(rx_data->rbd_area.dma_address >> 32);
2119 E1000_WRITE_REG(hw, E1000_RDBAH(rx_ring->index), buf_high);
2120 E1000_WRITE_REG(hw, E1000_RDBAL(rx_ring->index), buf_low);
2123 * Initialize the length register
2125 size = rx_data->ring_size * sizeof (union e1000_adv_rx_desc);
2126 E1000_WRITE_REG(hw, E1000_RDLEN(rx_ring->index), size);
2129 * Initialize buffer size & descriptor type
2131 E1000_WRITE_REG(hw, E1000_SRRCTL(rx_ring->index),
2132 ((igb->rx_buf_size >> E1000_SRRCTL_BSIZEPKT_SHIFT) |
2133 E1000_SRRCTL_DESCTYPE_ADV_ONEBUF));
2136 * Setup the Receive Descriptor Control Register (RXDCTL)
2138 rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(rx_ring->index));
2139 rxdctl &= igb->capab->rxdctl_mask;
2140 rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
2141 rxdctl |= 16; /* pthresh */
2142 rxdctl |= 8 << 8; /* hthresh */
2143 rxdctl |= 1 << 16; /* wthresh */
2144 E1000_WRITE_REG(hw, E1000_RXDCTL(rx_ring->index), rxdctl);
2146 rx_data->rbd_next = 0;
2149 static void
2150 igb_setup_rx(igb_t *igb)
2152 igb_rx_ring_t *rx_ring;
2153 igb_rx_data_t *rx_data;
2154 igb_rx_group_t *rx_group;
2155 struct e1000_hw *hw = &igb->hw;
2156 uint32_t rctl, rxcsum;
2157 uint32_t ring_per_group;
2158 int i;
2161 * Setup the Receive Control Register (RCTL), and enable the
2162 * receiver. The initial configuration is to: enable the receiver,
2163 * accept broadcasts, discard bad packets, accept long packets,
2164 * disable VLAN filter checking, and set receive buffer size to
2165 * 2k. For 82575, also set the receive descriptor minimum
2166 * threshold size to 1/2 the ring.
2168 rctl = E1000_READ_REG(hw, E1000_RCTL);
2171 * Clear the field used for wakeup control. This driver doesn't do
2172 * wakeup but leave this here for completeness.
2174 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
2175 rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
2177 rctl |= (E1000_RCTL_EN | /* Enable Receive Unit */
2178 E1000_RCTL_BAM | /* Accept Broadcast Packets */
2179 E1000_RCTL_LPE | /* Large Packet Enable */
2180 /* Multicast filter offset */
2181 (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT) |
2182 E1000_RCTL_RDMTS_HALF | /* rx descriptor threshold */
2183 E1000_RCTL_SECRC); /* Strip Ethernet CRC */
2185 for (i = 0; i < igb->num_rx_groups; i++) {
2186 rx_group = &igb->rx_groups[i];
2187 rx_group->index = i;
2188 rx_group->igb = igb;
2192 * Set up all rx descriptor rings - must be called before receive unit
2193 * enabled.
2195 ring_per_group = igb->num_rx_rings / igb->num_rx_groups;
2196 for (i = 0; i < igb->num_rx_rings; i++) {
2197 rx_ring = &igb->rx_rings[i];
2198 igb_setup_rx_ring(rx_ring);
2201 * Map a ring to a group by assigning a group index
2203 rx_ring->group_index = i / ring_per_group;
2207 * Setup the Rx Long Packet Max Length register
2209 E1000_WRITE_REG(hw, E1000_RLPML, igb->max_frame_size);
2212 * Hardware checksum settings
2214 if (igb->rx_hcksum_enable) {
2215 rxcsum =
2216 E1000_RXCSUM_TUOFL | /* TCP/UDP checksum */
2217 E1000_RXCSUM_IPOFL; /* IP checksum */
2219 E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
2223 * Setup classify and RSS for multiple receive queues
2225 switch (igb->vmdq_mode) {
2226 case E1000_VMDQ_OFF:
2228 * One ring group, only RSS is needed when more than
2229 * one ring enabled.
2231 if (igb->num_rx_rings > 1)
2232 igb_setup_rss(igb);
2233 break;
2234 case E1000_VMDQ_MAC:
2236 * Multiple groups, each group has one ring,
2237 * only the MAC classification is needed.
2239 igb_setup_mac_classify(igb);
2240 break;
2241 case E1000_VMDQ_MAC_RSS:
2243 * Multiple groups and multiple rings, both
2244 * MAC classification and RSS are needed.
2246 igb_setup_mac_rss_classify(igb);
2247 break;
2251 * Enable the receive unit - must be done after all
2252 * the rx setup above.
2254 E1000_WRITE_REG(hw, E1000_RCTL, rctl);
2257 * Initialize all adapter ring head & tail pointers - must
2258 * be done after receive unit is enabled
2260 for (i = 0; i < igb->num_rx_rings; i++) {
2261 rx_ring = &igb->rx_rings[i];
2262 rx_data = rx_ring->rx_data;
2263 E1000_WRITE_REG(hw, E1000_RDH(i), 0);
2264 E1000_WRITE_REG(hw, E1000_RDT(i), rx_data->ring_size - 1);
2268 * 82575 with manageability enabled needs a special flush to make
2269 * sure the fifos start clean.
2271 if ((hw->mac.type == e1000_82575) &&
2272 (E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) {
2273 e1000_rx_fifo_flush_82575(hw);
2277 static void
2278 igb_setup_tx_ring(igb_tx_ring_t *tx_ring)
2280 igb_t *igb = tx_ring->igb;
2281 struct e1000_hw *hw = &igb->hw;
2282 uint32_t size;
2283 uint32_t buf_low;
2284 uint32_t buf_high;
2285 uint32_t reg_val;
2287 ASSERT(mutex_owned(&tx_ring->tx_lock));
2288 ASSERT(mutex_owned(&igb->gen_lock));
2292 * Initialize the length register
2294 size = tx_ring->ring_size * sizeof (union e1000_adv_tx_desc);
2295 E1000_WRITE_REG(hw, E1000_TDLEN(tx_ring->index), size);
2298 * Initialize the base address registers
2300 buf_low = (uint32_t)tx_ring->tbd_area.dma_address;
2301 buf_high = (uint32_t)(tx_ring->tbd_area.dma_address >> 32);
2302 E1000_WRITE_REG(hw, E1000_TDBAL(tx_ring->index), buf_low);
2303 E1000_WRITE_REG(hw, E1000_TDBAH(tx_ring->index), buf_high);
2306 * Setup head & tail pointers
2308 E1000_WRITE_REG(hw, E1000_TDH(tx_ring->index), 0);
2309 E1000_WRITE_REG(hw, E1000_TDT(tx_ring->index), 0);
2312 * Setup head write-back
2314 if (igb->tx_head_wb_enable) {
2316 * The memory of the head write-back is allocated using
2317 * the extra tbd beyond the tail of the tbd ring.
2319 tx_ring->tbd_head_wb = (uint32_t *)
2320 ((uintptr_t)tx_ring->tbd_area.address + size);
2321 *tx_ring->tbd_head_wb = 0;
2323 buf_low = (uint32_t)
2324 (tx_ring->tbd_area.dma_address + size);
2325 buf_high = (uint32_t)
2326 ((tx_ring->tbd_area.dma_address + size) >> 32);
2328 /* Set the head write-back enable bit */
2329 buf_low |= E1000_TX_HEAD_WB_ENABLE;
2331 E1000_WRITE_REG(hw, E1000_TDWBAL(tx_ring->index), buf_low);
2332 E1000_WRITE_REG(hw, E1000_TDWBAH(tx_ring->index), buf_high);
2335 * Turn off relaxed ordering for head write back or it will
2336 * cause problems with the tx recycling
2338 reg_val = E1000_READ_REG(hw,
2339 E1000_DCA_TXCTRL(tx_ring->index));
2340 reg_val &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
2341 E1000_WRITE_REG(hw,
2342 E1000_DCA_TXCTRL(tx_ring->index), reg_val);
2343 } else {
2344 tx_ring->tbd_head_wb = NULL;
2347 tx_ring->tbd_head = 0;
2348 tx_ring->tbd_tail = 0;
2349 tx_ring->tbd_free = tx_ring->ring_size;
2351 if (igb->tx_ring_init == B_TRUE) {
2352 tx_ring->tcb_head = 0;
2353 tx_ring->tcb_tail = 0;
2354 tx_ring->tcb_free = tx_ring->free_list_size;
2358 * Enable TXDCTL per queue
2360 reg_val = E1000_READ_REG(hw, E1000_TXDCTL(tx_ring->index));
2361 reg_val |= E1000_TXDCTL_QUEUE_ENABLE;
2362 E1000_WRITE_REG(hw, E1000_TXDCTL(tx_ring->index), reg_val);
2365 * Initialize hardware checksum offload settings
2367 bzero(&tx_ring->tx_context, sizeof (tx_context_t));
2370 static void
2371 igb_setup_tx(igb_t *igb)
2373 igb_tx_ring_t *tx_ring;
2374 struct e1000_hw *hw = &igb->hw;
2375 uint32_t reg_val;
2376 int i;
2378 for (i = 0; i < igb->num_tx_rings; i++) {
2379 tx_ring = &igb->tx_rings[i];
2380 igb_setup_tx_ring(tx_ring);
2384 * Setup the Transmit Control Register (TCTL)
2386 reg_val = E1000_READ_REG(hw, E1000_TCTL);
2387 reg_val &= ~E1000_TCTL_CT;
2388 reg_val |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2389 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2391 /* Enable transmits */
2392 reg_val |= E1000_TCTL_EN;
2394 E1000_WRITE_REG(hw, E1000_TCTL, reg_val);
2398 * igb_setup_rss - Setup receive-side scaling feature
2400 static void
2401 igb_setup_rss(igb_t *igb)
2403 struct e1000_hw *hw = &igb->hw;
2404 uint32_t i, mrqc, rxcsum;
2405 int shift = 0;
2406 uint32_t random;
2407 union e1000_reta {
2408 uint32_t dword;
2409 uint8_t bytes[4];
2410 } reta;
2412 /* Setup the Redirection Table */
2413 if (hw->mac.type == e1000_82576) {
2414 shift = 3;
2415 } else if (hw->mac.type == e1000_82575) {
2416 shift = 6;
2418 for (i = 0; i < (32 * 4); i++) {
2419 reta.bytes[i & 3] = (i % igb->num_rx_rings) << shift;
2420 if ((i & 3) == 3) {
2421 E1000_WRITE_REG(hw,
2422 (E1000_RETA(0) + (i & ~3)), reta.dword);
2426 /* Fill out hash function seeds */
2427 for (i = 0; i < 10; i++) {
2428 (void) random_get_pseudo_bytes((uint8_t *)&random,
2429 sizeof (uint32_t));
2430 E1000_WRITE_REG(hw, E1000_RSSRK(i), random);
2433 /* Setup the Multiple Receive Queue Control register */
2434 mrqc = E1000_MRQC_ENABLE_RSS_4Q;
2435 mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
2436 E1000_MRQC_RSS_FIELD_IPV4_TCP |
2437 E1000_MRQC_RSS_FIELD_IPV6 |
2438 E1000_MRQC_RSS_FIELD_IPV6_TCP |
2439 E1000_MRQC_RSS_FIELD_IPV4_UDP |
2440 E1000_MRQC_RSS_FIELD_IPV6_UDP |
2441 E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
2442 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
2444 E1000_WRITE_REG(hw, E1000_MRQC, mrqc);
2447 * Disable Packet Checksum to enable RSS for multiple receive queues.
2449 * The Packet Checksum is not ethernet CRC. It is another kind of
2450 * checksum offloading provided by the 82575 chipset besides the IP
2451 * header checksum offloading and the TCP/UDP checksum offloading.
2452 * The Packet Checksum is by default computed over the entire packet
2453 * from the first byte of the DA through the last byte of the CRC,
2454 * including the Ethernet and IP headers.
2456 * It is a hardware limitation that Packet Checksum is mutually
2457 * exclusive with RSS.
2459 rxcsum = E1000_READ_REG(hw, E1000_RXCSUM);
2460 rxcsum |= E1000_RXCSUM_PCSD;
2461 E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
2465 * igb_setup_mac_rss_classify - Setup MAC classification and rss
2467 static void
2468 igb_setup_mac_rss_classify(igb_t *igb)
2470 struct e1000_hw *hw = &igb->hw;
2471 uint32_t i, mrqc, vmdctl, rxcsum;
2472 uint32_t ring_per_group;
2473 int shift_group0, shift_group1;
2474 uint32_t random;
2475 union e1000_reta {
2476 uint32_t dword;
2477 uint8_t bytes[4];
2478 } reta;
2480 ring_per_group = igb->num_rx_rings / igb->num_rx_groups;
2482 /* Setup the Redirection Table, it is shared between two groups */
2483 shift_group0 = 2;
2484 shift_group1 = 6;
2485 for (i = 0; i < (32 * 4); i++) {
2486 reta.bytes[i & 3] = ((i % ring_per_group) << shift_group0) |
2487 ((ring_per_group + (i % ring_per_group)) << shift_group1);
2488 if ((i & 3) == 3) {
2489 E1000_WRITE_REG(hw,
2490 (E1000_RETA(0) + (i & ~3)), reta.dword);
2494 /* Fill out hash function seeds */
2495 for (i = 0; i < 10; i++) {
2496 (void) random_get_pseudo_bytes((uint8_t *)&random,
2497 sizeof (uint32_t));
2498 E1000_WRITE_REG(hw, E1000_RSSRK(i), random);
2502 * Setup the Multiple Receive Queue Control register,
2503 * enable VMDq based on packet destination MAC address and RSS.
2505 mrqc = E1000_MRQC_ENABLE_VMDQ_MAC_RSS_GROUP;
2506 mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
2507 E1000_MRQC_RSS_FIELD_IPV4_TCP |
2508 E1000_MRQC_RSS_FIELD_IPV6 |
2509 E1000_MRQC_RSS_FIELD_IPV6_TCP |
2510 E1000_MRQC_RSS_FIELD_IPV4_UDP |
2511 E1000_MRQC_RSS_FIELD_IPV6_UDP |
2512 E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
2513 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
2515 E1000_WRITE_REG(hw, E1000_MRQC, mrqc);
2518 /* Define the default group and default queues */
2519 vmdctl = E1000_VMDQ_MAC_GROUP_DEFAULT_QUEUE;
2520 E1000_WRITE_REG(hw, E1000_VT_CTL, vmdctl);
2523 * Disable Packet Checksum to enable RSS for multiple receive queues.
2525 * The Packet Checksum is not ethernet CRC. It is another kind of
2526 * checksum offloading provided by the 82575 chipset besides the IP
2527 * header checksum offloading and the TCP/UDP checksum offloading.
2528 * The Packet Checksum is by default computed over the entire packet
2529 * from the first byte of the DA through the last byte of the CRC,
2530 * including the Ethernet and IP headers.
2532 * It is a hardware limitation that Packet Checksum is mutually
2533 * exclusive with RSS.
2535 rxcsum = E1000_READ_REG(hw, E1000_RXCSUM);
2536 rxcsum |= E1000_RXCSUM_PCSD;
2537 E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
2541 * igb_setup_mac_classify - Setup MAC classification feature
2543 static void
2544 igb_setup_mac_classify(igb_t *igb)
2546 struct e1000_hw *hw = &igb->hw;
2547 uint32_t mrqc, rxcsum;
2550 * Setup the Multiple Receive Queue Control register,
2551 * enable VMDq based on packet destination MAC address.
2553 mrqc = E1000_MRQC_ENABLE_VMDQ_MAC_GROUP;
2554 E1000_WRITE_REG(hw, E1000_MRQC, mrqc);
2557 * Disable Packet Checksum to enable RSS for multiple receive queues.
2559 * The Packet Checksum is not ethernet CRC. It is another kind of
2560 * checksum offloading provided by the 82575 chipset besides the IP
2561 * header checksum offloading and the TCP/UDP checksum offloading.
2562 * The Packet Checksum is by default computed over the entire packet
2563 * from the first byte of the DA through the last byte of the CRC,
2564 * including the Ethernet and IP headers.
2566 * It is a hardware limitation that Packet Checksum is mutually
2567 * exclusive with RSS.
2569 rxcsum = E1000_READ_REG(hw, E1000_RXCSUM);
2570 rxcsum |= E1000_RXCSUM_PCSD;
2571 E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum);
2576 * igb_init_unicst - Initialize the unicast addresses
2578 static void
2579 igb_init_unicst(igb_t *igb)
2581 struct e1000_hw *hw = &igb->hw;
2582 int slot;
2585 * Here we should consider two situations:
2587 * 1. Chipset is initialized the first time
2588 * Initialize the multiple unicast addresses, and
2589 * save the default MAC address.
2591 * 2. Chipset is reset
2592 * Recover the multiple unicast addresses from the
2593 * software data structure to the RAR registers.
2597 * Clear the default MAC address in the RAR0 rgister,
2598 * which is loaded from EEPROM when system boot or chipreset,
2599 * this will cause the conficts with add_mac/rem_mac entry
2600 * points when VMDq is enabled. For this reason, the RAR0
2601 * must be cleared for both cases mentioned above.
2603 e1000_rar_clear(hw, 0);
2605 if (!igb->unicst_init) {
2607 /* Initialize the multiple unicast addresses */
2608 igb->unicst_total = MAX_NUM_UNICAST_ADDRESSES;
2609 igb->unicst_avail = igb->unicst_total;
2611 for (slot = 0; slot < igb->unicst_total; slot++)
2612 igb->unicst_addr[slot].mac.set = 0;
2614 igb->unicst_init = B_TRUE;
2615 } else {
2616 /* Re-configure the RAR registers */
2617 for (slot = 0; slot < igb->unicst_total; slot++) {
2618 (void) e1000_rar_set_vmdq(hw,
2619 igb->unicst_addr[slot].mac.addr,
2620 slot, igb->vmdq_mode,
2621 igb->unicst_addr[slot].mac.group_index);
2627 * igb_unicst_find - Find the slot for the specified unicast address
2630 igb_unicst_find(igb_t *igb, const uint8_t *mac_addr)
2632 int slot;
2634 ASSERT(mutex_owned(&igb->gen_lock));
2636 for (slot = 0; slot < igb->unicst_total; slot++) {
2637 if (bcmp(igb->unicst_addr[slot].mac.addr,
2638 mac_addr, ETHERADDRL) == 0)
2639 return (slot);
2642 return (-1);
2646 * igb_unicst_set - Set the unicast address to the specified slot
2649 igb_unicst_set(igb_t *igb, const uint8_t *mac_addr,
2650 int slot)
2652 struct e1000_hw *hw = &igb->hw;
2654 ASSERT(mutex_owned(&igb->gen_lock));
2657 * Save the unicast address in the software data structure
2659 bcopy(mac_addr, igb->unicst_addr[slot].mac.addr, ETHERADDRL);
2662 * Set the unicast address to the RAR register
2664 (void) e1000_rar_set(hw, (uint8_t *)mac_addr, slot);
2666 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
2667 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
2668 return (EIO);
2671 return (0);
2675 * igb_multicst_add - Add a multicst address
2678 igb_multicst_add(igb_t *igb, const uint8_t *multiaddr)
2680 struct ether_addr *new_table;
2681 size_t new_len;
2682 size_t old_len;
2684 ASSERT(mutex_owned(&igb->gen_lock));
2686 if ((multiaddr[0] & 01) == 0) {
2687 igb_error(igb, "Illegal multicast address");
2688 return (EINVAL);
2691 if (igb->mcast_count >= igb->mcast_max_num) {
2692 igb_error(igb, "Adapter requested more than %d mcast addresses",
2693 igb->mcast_max_num);
2694 return (ENOENT);
2697 if (igb->mcast_count == igb->mcast_alloc_count) {
2698 old_len = igb->mcast_alloc_count *
2699 sizeof (struct ether_addr);
2700 new_len = (igb->mcast_alloc_count + MCAST_ALLOC_COUNT) *
2701 sizeof (struct ether_addr);
2703 new_table = kmem_alloc(new_len, KM_NOSLEEP);
2704 if (new_table == NULL) {
2705 igb_error(igb,
2706 "Not enough memory to alloc mcast table");
2707 return (ENOMEM);
2710 if (igb->mcast_table != NULL) {
2711 bcopy(igb->mcast_table, new_table, old_len);
2712 kmem_free(igb->mcast_table, old_len);
2714 igb->mcast_alloc_count += MCAST_ALLOC_COUNT;
2715 igb->mcast_table = new_table;
2718 bcopy(multiaddr,
2719 &igb->mcast_table[igb->mcast_count], ETHERADDRL);
2720 igb->mcast_count++;
2723 * Update the multicast table in the hardware
2725 igb_setup_multicst(igb);
2727 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
2728 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
2729 return (EIO);
2732 return (0);
2736 * igb_multicst_remove - Remove a multicst address
2739 igb_multicst_remove(igb_t *igb, const uint8_t *multiaddr)
2741 struct ether_addr *new_table;
2742 size_t new_len;
2743 size_t old_len;
2744 int i;
2746 ASSERT(mutex_owned(&igb->gen_lock));
2748 for (i = 0; i < igb->mcast_count; i++) {
2749 if (bcmp(multiaddr, &igb->mcast_table[i],
2750 ETHERADDRL) == 0) {
2751 for (i++; i < igb->mcast_count; i++) {
2752 igb->mcast_table[i - 1] =
2753 igb->mcast_table[i];
2755 igb->mcast_count--;
2756 break;
2760 if ((igb->mcast_alloc_count - igb->mcast_count) >
2761 MCAST_ALLOC_COUNT) {
2762 old_len = igb->mcast_alloc_count *
2763 sizeof (struct ether_addr);
2764 new_len = (igb->mcast_alloc_count - MCAST_ALLOC_COUNT) *
2765 sizeof (struct ether_addr);
2767 new_table = kmem_alloc(new_len, KM_NOSLEEP);
2768 if (new_table != NULL) {
2769 bcopy(igb->mcast_table, new_table, new_len);
2770 kmem_free(igb->mcast_table, old_len);
2771 igb->mcast_alloc_count -= MCAST_ALLOC_COUNT;
2772 igb->mcast_table = new_table;
2777 * Update the multicast table in the hardware
2779 igb_setup_multicst(igb);
2781 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
2782 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
2783 return (EIO);
2786 return (0);
2789 static void
2790 igb_release_multicast(igb_t *igb)
2792 if (igb->mcast_table != NULL) {
2793 kmem_free(igb->mcast_table,
2794 igb->mcast_alloc_count * sizeof (struct ether_addr));
2795 igb->mcast_table = NULL;
2800 * igb_setup_multicast - setup multicast data structures
2802 * This routine initializes all of the multicast related structures
2803 * and save them in the hardware registers.
2805 static void
2806 igb_setup_multicst(igb_t *igb)
2808 uint8_t *mc_addr_list;
2809 uint32_t mc_addr_count;
2810 struct e1000_hw *hw = &igb->hw;
2812 ASSERT(mutex_owned(&igb->gen_lock));
2813 ASSERT(igb->mcast_count <= igb->mcast_max_num);
2815 mc_addr_list = (uint8_t *)igb->mcast_table;
2816 mc_addr_count = igb->mcast_count;
2819 * Update the multicase addresses to the MTA registers
2821 e1000_update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
2825 * igb_get_conf - Get driver configurations set in driver.conf
2827 * This routine gets user-configured values out of the configuration
2828 * file igb.conf.
2830 * For each configurable value, there is a minimum, a maximum, and a
2831 * default.
2832 * If user does not configure a value, use the default.
2833 * If user configures below the minimum, use the minumum.
2834 * If user configures above the maximum, use the maxumum.
2836 static void
2837 igb_get_conf(igb_t *igb)
2839 struct e1000_hw *hw = &igb->hw;
2840 uint32_t default_mtu;
2841 uint32_t flow_control;
2842 uint32_t ring_per_group;
2843 int i;
2846 * igb driver supports the following user configurations:
2848 * Link configurations:
2849 * adv_autoneg_cap
2850 * adv_1000fdx_cap
2851 * adv_100fdx_cap
2852 * adv_100hdx_cap
2853 * adv_10fdx_cap
2854 * adv_10hdx_cap
2855 * Note: 1000hdx is not supported.
2857 * Jumbo frame configuration:
2858 * default_mtu
2860 * Ethernet flow control configuration:
2861 * flow_control
2863 * Multiple rings configurations:
2864 * tx_queue_number
2865 * tx_ring_size
2866 * rx_queue_number
2867 * rx_ring_size
2869 * Call igb_get_prop() to get the value for a specific
2870 * configuration parameter.
2874 * Link configurations
2876 igb->param_adv_autoneg_cap = igb_get_prop(igb,
2877 PROP_ADV_AUTONEG_CAP, 0, 1, 1);
2878 igb->param_adv_1000fdx_cap = igb_get_prop(igb,
2879 PROP_ADV_1000FDX_CAP, 0, 1, 1);
2880 igb->param_adv_100fdx_cap = igb_get_prop(igb,
2881 PROP_ADV_100FDX_CAP, 0, 1, 1);
2882 igb->param_adv_100hdx_cap = igb_get_prop(igb,
2883 PROP_ADV_100HDX_CAP, 0, 1, 1);
2884 igb->param_adv_10fdx_cap = igb_get_prop(igb,
2885 PROP_ADV_10FDX_CAP, 0, 1, 1);
2886 igb->param_adv_10hdx_cap = igb_get_prop(igb,
2887 PROP_ADV_10HDX_CAP, 0, 1, 1);
2890 * Jumbo frame configurations
2892 default_mtu = igb_get_prop(igb, PROP_DEFAULT_MTU,
2893 MIN_MTU, MAX_MTU, DEFAULT_MTU);
2895 igb->max_frame_size = default_mtu +
2896 sizeof (struct ether_vlan_header) + ETHERFCSL;
2899 * Ethernet flow control configuration
2901 flow_control = igb_get_prop(igb, PROP_FLOW_CONTROL,
2902 e1000_fc_none, 4, e1000_fc_full);
2903 if (flow_control == 4)
2904 flow_control = e1000_fc_default;
2906 hw->fc.requested_mode = flow_control;
2909 * Multiple rings configurations
2911 igb->tx_ring_size = igb_get_prop(igb, PROP_TX_RING_SIZE,
2912 MIN_TX_RING_SIZE, MAX_TX_RING_SIZE, DEFAULT_TX_RING_SIZE);
2913 igb->rx_ring_size = igb_get_prop(igb, PROP_RX_RING_SIZE,
2914 MIN_RX_RING_SIZE, MAX_RX_RING_SIZE, DEFAULT_RX_RING_SIZE);
2916 igb->mr_enable = igb_get_prop(igb, PROP_MR_ENABLE, 0, 1, 0);
2917 igb->num_rx_groups = igb_get_prop(igb, PROP_RX_GROUP_NUM,
2918 MIN_RX_GROUP_NUM, MAX_RX_GROUP_NUM, DEFAULT_RX_GROUP_NUM);
2920 * Currently we do not support VMDq for 82576 and 82580.
2921 * If it is e1000_82576, set num_rx_groups to 1.
2923 if (hw->mac.type >= e1000_82576)
2924 igb->num_rx_groups = 1;
2926 if (igb->mr_enable) {
2927 igb->num_tx_rings = igb->capab->def_tx_que_num;
2928 igb->num_rx_rings = igb->capab->def_rx_que_num;
2929 } else {
2930 igb->num_tx_rings = 1;
2931 igb->num_rx_rings = 1;
2933 if (igb->num_rx_groups > 1) {
2934 igb_error(igb,
2935 "Invalid rx groups number. Please enable multiple "
2936 "rings first");
2937 igb->num_rx_groups = 1;
2942 * Check the divisibility between rx rings and rx groups.
2944 for (i = igb->num_rx_groups; i > 0; i--) {
2945 if ((igb->num_rx_rings % i) == 0)
2946 break;
2948 if (i != igb->num_rx_groups) {
2949 igb_error(igb,
2950 "Invalid rx groups number. Downgrade the rx group "
2951 "number to %d.", i);
2952 igb->num_rx_groups = i;
2956 * Get the ring number per group.
2958 ring_per_group = igb->num_rx_rings / igb->num_rx_groups;
2960 if (igb->num_rx_groups == 1) {
2962 * One rx ring group, the rx ring number is num_rx_rings.
2964 igb->vmdq_mode = E1000_VMDQ_OFF;
2965 } else if (ring_per_group == 1) {
2967 * Multiple rx groups, each group has one rx ring.
2969 igb->vmdq_mode = E1000_VMDQ_MAC;
2970 } else {
2972 * Multiple groups and multiple rings.
2974 igb->vmdq_mode = E1000_VMDQ_MAC_RSS;
2978 * Tunable used to force an interrupt type. The only use is
2979 * for testing of the lesser interrupt types.
2980 * 0 = don't force interrupt type
2981 * 1 = force interrupt type MSIX
2982 * 2 = force interrupt type MSI
2983 * 3 = force interrupt type Legacy
2985 igb->intr_force = igb_get_prop(igb, PROP_INTR_FORCE,
2986 IGB_INTR_NONE, IGB_INTR_LEGACY, IGB_INTR_NONE);
2988 igb->tx_hcksum_enable = igb_get_prop(igb, PROP_TX_HCKSUM_ENABLE,
2989 0, 1, 1);
2990 igb->rx_hcksum_enable = igb_get_prop(igb, PROP_RX_HCKSUM_ENABLE,
2991 0, 1, 1);
2992 igb->lso_enable = igb_get_prop(igb, PROP_LSO_ENABLE,
2993 0, 1, 1);
2994 igb->tx_head_wb_enable = igb_get_prop(igb, PROP_TX_HEAD_WB_ENABLE,
2995 0, 1, 1);
2998 * igb LSO needs the tx h/w checksum support.
2999 * Here LSO will be disabled if tx h/w checksum has been disabled.
3001 if (igb->tx_hcksum_enable == B_FALSE)
3002 igb->lso_enable = B_FALSE;
3004 igb->tx_copy_thresh = igb_get_prop(igb, PROP_TX_COPY_THRESHOLD,
3005 MIN_TX_COPY_THRESHOLD, MAX_TX_COPY_THRESHOLD,
3006 DEFAULT_TX_COPY_THRESHOLD);
3007 igb->tx_recycle_thresh = igb_get_prop(igb, PROP_TX_RECYCLE_THRESHOLD,
3008 MIN_TX_RECYCLE_THRESHOLD, MAX_TX_RECYCLE_THRESHOLD,
3009 DEFAULT_TX_RECYCLE_THRESHOLD);
3010 igb->tx_overload_thresh = igb_get_prop(igb, PROP_TX_OVERLOAD_THRESHOLD,
3011 MIN_TX_OVERLOAD_THRESHOLD, MAX_TX_OVERLOAD_THRESHOLD,
3012 DEFAULT_TX_OVERLOAD_THRESHOLD);
3013 igb->tx_resched_thresh = igb_get_prop(igb, PROP_TX_RESCHED_THRESHOLD,
3014 MIN_TX_RESCHED_THRESHOLD,
3015 MIN(igb->tx_ring_size, MAX_TX_RESCHED_THRESHOLD),
3016 igb->tx_ring_size > DEFAULT_TX_RESCHED_THRESHOLD ?
3017 DEFAULT_TX_RESCHED_THRESHOLD : DEFAULT_TX_RESCHED_THRESHOLD_LOW);
3019 igb->rx_copy_thresh = igb_get_prop(igb, PROP_RX_COPY_THRESHOLD,
3020 MIN_RX_COPY_THRESHOLD, MAX_RX_COPY_THRESHOLD,
3021 DEFAULT_RX_COPY_THRESHOLD);
3022 igb->rx_limit_per_intr = igb_get_prop(igb, PROP_RX_LIMIT_PER_INTR,
3023 MIN_RX_LIMIT_PER_INTR, MAX_RX_LIMIT_PER_INTR,
3024 DEFAULT_RX_LIMIT_PER_INTR);
3026 igb->intr_throttling[0] = igb_get_prop(igb, PROP_INTR_THROTTLING,
3027 igb->capab->min_intr_throttle,
3028 igb->capab->max_intr_throttle,
3029 igb->capab->def_intr_throttle);
3032 * Max number of multicast addresses
3034 igb->mcast_max_num =
3035 igb_get_prop(igb, PROP_MCAST_MAX_NUM,
3036 MIN_MCAST_NUM, MAX_MCAST_NUM, DEFAULT_MCAST_NUM);
3040 * igb_get_prop - Get a property value out of the configuration file igb.conf
3042 * Caller provides the name of the property, a default value, a minimum
3043 * value, and a maximum value.
3045 * Return configured value of the property, with default, minimum and
3046 * maximum properly applied.
3048 static int
3049 igb_get_prop(igb_t *igb,
3050 char *propname, /* name of the property */
3051 int minval, /* minimum acceptable value */
3052 int maxval, /* maximim acceptable value */
3053 int defval) /* default value */
3055 int value;
3058 * Call ddi_prop_get_int() to read the conf settings
3060 value = ddi_prop_get_int(DDI_DEV_T_ANY, igb->dip,
3061 DDI_PROP_DONTPASS, propname, defval);
3063 if (value > maxval)
3064 value = maxval;
3066 if (value < minval)
3067 value = minval;
3069 return (value);
3073 * igb_setup_link - Using the link properties to setup the link
3076 igb_setup_link(igb_t *igb, boolean_t setup_hw)
3078 struct e1000_mac_info *mac;
3079 struct e1000_phy_info *phy;
3080 boolean_t invalid;
3082 mac = &igb->hw.mac;
3083 phy = &igb->hw.phy;
3084 invalid = B_FALSE;
3086 if (igb->param_adv_autoneg_cap == 1) {
3087 mac->autoneg = B_TRUE;
3088 phy->autoneg_advertised = 0;
3091 * 1000hdx is not supported for autonegotiation
3093 if (igb->param_adv_1000fdx_cap == 1)
3094 phy->autoneg_advertised |= ADVERTISE_1000_FULL;
3096 if (igb->param_adv_100fdx_cap == 1)
3097 phy->autoneg_advertised |= ADVERTISE_100_FULL;
3099 if (igb->param_adv_100hdx_cap == 1)
3100 phy->autoneg_advertised |= ADVERTISE_100_HALF;
3102 if (igb->param_adv_10fdx_cap == 1)
3103 phy->autoneg_advertised |= ADVERTISE_10_FULL;
3105 if (igb->param_adv_10hdx_cap == 1)
3106 phy->autoneg_advertised |= ADVERTISE_10_HALF;
3108 if (phy->autoneg_advertised == 0)
3109 invalid = B_TRUE;
3110 } else {
3111 mac->autoneg = B_FALSE;
3114 * 1000fdx and 1000hdx are not supported for forced link
3116 if (igb->param_adv_100fdx_cap == 1)
3117 mac->forced_speed_duplex = ADVERTISE_100_FULL;
3118 else if (igb->param_adv_100hdx_cap == 1)
3119 mac->forced_speed_duplex = ADVERTISE_100_HALF;
3120 else if (igb->param_adv_10fdx_cap == 1)
3121 mac->forced_speed_duplex = ADVERTISE_10_FULL;
3122 else if (igb->param_adv_10hdx_cap == 1)
3123 mac->forced_speed_duplex = ADVERTISE_10_HALF;
3124 else
3125 invalid = B_TRUE;
3128 if (invalid) {
3129 igb_notice(igb, "Invalid link settings. Setup link to "
3130 "autonegotiation with full link capabilities.");
3131 mac->autoneg = B_TRUE;
3132 phy->autoneg_advertised = ADVERTISE_1000_FULL |
3133 ADVERTISE_100_FULL | ADVERTISE_100_HALF |
3134 ADVERTISE_10_FULL | ADVERTISE_10_HALF;
3137 if (setup_hw) {
3138 if (e1000_setup_link(&igb->hw) != E1000_SUCCESS)
3139 return (IGB_FAILURE);
3142 return (IGB_SUCCESS);
3147 * igb_is_link_up - Check if the link is up
3149 static boolean_t
3150 igb_is_link_up(igb_t *igb)
3152 struct e1000_hw *hw = &igb->hw;
3153 boolean_t link_up = B_FALSE;
3155 ASSERT(mutex_owned(&igb->gen_lock));
3158 * get_link_status is set in the interrupt handler on link-status-change
3159 * or rx sequence error interrupt. get_link_status will stay
3160 * false until the e1000_check_for_link establishes link only
3161 * for copper adapters.
3163 switch (hw->phy.media_type) {
3164 case e1000_media_type_copper:
3165 if (hw->mac.get_link_status) {
3166 (void) e1000_check_for_link(hw);
3167 link_up = !hw->mac.get_link_status;
3168 } else {
3169 link_up = B_TRUE;
3171 break;
3172 case e1000_media_type_fiber:
3173 (void) e1000_check_for_link(hw);
3174 link_up = (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU);
3175 break;
3176 case e1000_media_type_internal_serdes:
3177 (void) e1000_check_for_link(hw);
3178 link_up = hw->mac.serdes_has_link;
3179 break;
3182 return (link_up);
3186 * igb_link_check - Link status processing
3188 static boolean_t
3189 igb_link_check(igb_t *igb)
3191 struct e1000_hw *hw = &igb->hw;
3192 uint16_t speed = 0, duplex = 0;
3193 boolean_t link_changed = B_FALSE;
3195 ASSERT(mutex_owned(&igb->gen_lock));
3197 if (igb_is_link_up(igb)) {
3199 * The Link is up, check whether it was marked as down earlier
3201 if (igb->link_state != LINK_STATE_UP) {
3202 (void) e1000_get_speed_and_duplex(hw, &speed, &duplex);
3203 igb->link_speed = speed;
3204 igb->link_duplex = duplex;
3205 igb->link_state = LINK_STATE_UP;
3206 link_changed = B_TRUE;
3207 if (!igb->link_complete)
3208 igb_stop_link_timer(igb);
3210 } else if (igb->link_complete) {
3211 if (igb->link_state != LINK_STATE_DOWN) {
3212 igb->link_speed = 0;
3213 igb->link_duplex = 0;
3214 igb->link_state = LINK_STATE_DOWN;
3215 link_changed = B_TRUE;
3219 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
3220 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
3221 return (B_FALSE);
3224 return (link_changed);
3228 * igb_local_timer - driver watchdog function
3230 * This function will handle the hardware stall check, link status
3231 * check and other routines.
3233 static void
3234 igb_local_timer(void *arg)
3236 igb_t *igb = (igb_t *)arg;
3237 boolean_t link_changed = B_FALSE;
3239 if (igb->igb_state & IGB_ERROR) {
3240 igb->reset_count++;
3241 if (igb_reset(igb) == IGB_SUCCESS)
3242 ddi_fm_service_impact(igb->dip, DDI_SERVICE_RESTORED);
3244 igb_restart_watchdog_timer(igb);
3245 return;
3248 if (igb_stall_check(igb) || (igb->igb_state & IGB_STALL)) {
3249 igb_fm_ereport(igb, DDI_FM_DEVICE_STALL);
3250 ddi_fm_service_impact(igb->dip, DDI_SERVICE_LOST);
3251 igb->reset_count++;
3252 if (igb_reset(igb) == IGB_SUCCESS)
3253 ddi_fm_service_impact(igb->dip, DDI_SERVICE_RESTORED);
3255 igb_restart_watchdog_timer(igb);
3256 return;
3259 mutex_enter(&igb->gen_lock);
3260 if (!(igb->igb_state & IGB_SUSPENDED) && (igb->igb_state & IGB_STARTED))
3261 link_changed = igb_link_check(igb);
3262 mutex_exit(&igb->gen_lock);
3264 if (link_changed)
3265 mac_link_update(igb->mac_hdl, igb->link_state);
3267 igb_restart_watchdog_timer(igb);
3271 * igb_link_timer - link setup timer function
3273 * It is called when the timer for link setup is expired, which indicates
3274 * the completion of the link setup. The link state will not be updated
3275 * until the link setup is completed. And the link state will not be sent
3276 * to the upper layer through mac_link_update() in this function. It will
3277 * be updated in the local timer routine or the interrupts service routine
3278 * after the interface is started (plumbed).
3280 static void
3281 igb_link_timer(void *arg)
3283 igb_t *igb = (igb_t *)arg;
3285 mutex_enter(&igb->link_lock);
3286 igb->link_complete = B_TRUE;
3287 igb->link_tid = 0;
3288 mutex_exit(&igb->link_lock);
3291 * igb_stall_check - check for transmit stall
3293 * This function checks if the adapter is stalled (in transmit).
3295 * It is called each time the watchdog timeout is invoked.
3296 * If the transmit descriptor reclaim continuously fails,
3297 * the watchdog value will increment by 1. If the watchdog
3298 * value exceeds the threshold, the igb is assumed to
3299 * have stalled and need to be reset.
3301 static boolean_t
3302 igb_stall_check(igb_t *igb)
3304 igb_tx_ring_t *tx_ring;
3305 struct e1000_hw *hw = &igb->hw;
3306 boolean_t result;
3307 int i;
3309 if (igb->link_state != LINK_STATE_UP)
3310 return (B_FALSE);
3313 * If any tx ring is stalled, we'll reset the chipset
3315 result = B_FALSE;
3316 for (i = 0; i < igb->num_tx_rings; i++) {
3317 tx_ring = &igb->tx_rings[i];
3319 if (tx_ring->recycle_fail > 0)
3320 tx_ring->stall_watchdog++;
3321 else
3322 tx_ring->stall_watchdog = 0;
3324 if (tx_ring->stall_watchdog >= STALL_WATCHDOG_TIMEOUT) {
3325 result = B_TRUE;
3326 if (hw->mac.type == e1000_82580) {
3327 hw->dev_spec._82575.global_device_reset
3328 = B_TRUE;
3330 break;
3334 if (result) {
3335 tx_ring->stall_watchdog = 0;
3336 tx_ring->recycle_fail = 0;
3339 return (result);
3344 * is_valid_mac_addr - Check if the mac address is valid
3346 static boolean_t
3347 is_valid_mac_addr(uint8_t *mac_addr)
3349 const uint8_t addr_test1[6] = { 0, 0, 0, 0, 0, 0 };
3350 const uint8_t addr_test2[6] =
3351 { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
3353 if (!(bcmp(addr_test1, mac_addr, ETHERADDRL)) ||
3354 !(bcmp(addr_test2, mac_addr, ETHERADDRL)))
3355 return (B_FALSE);
3357 return (B_TRUE);
3360 static boolean_t
3361 igb_find_mac_address(igb_t *igb)
3363 struct e1000_hw *hw = &igb->hw;
3364 #ifdef __sparc
3365 uchar_t *bytes;
3366 struct ether_addr sysaddr;
3367 uint_t nelts;
3368 int err;
3369 boolean_t found = B_FALSE;
3372 * The "vendor's factory-set address" may already have
3373 * been extracted from the chip, but if the property
3374 * "local-mac-address" is set we use that instead.
3376 * We check whether it looks like an array of 6
3377 * bytes (which it should, if OBP set it). If we can't
3378 * make sense of it this way, we'll ignore it.
3380 err = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, igb->dip,
3381 DDI_PROP_DONTPASS, "local-mac-address", &bytes, &nelts);
3382 if (err == DDI_PROP_SUCCESS) {
3383 if (nelts == ETHERADDRL) {
3384 while (nelts--)
3385 hw->mac.addr[nelts] = bytes[nelts];
3386 found = B_TRUE;
3388 ddi_prop_free(bytes);
3392 * Look up the OBP property "local-mac-address?". If the user has set
3393 * 'local-mac-address? = false', use "the system address" instead.
3395 if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, igb->dip, 0,
3396 "local-mac-address?", &bytes, &nelts) == DDI_PROP_SUCCESS) {
3397 if (strncmp("false", (caddr_t)bytes, (size_t)nelts) == 0) {
3398 if (localetheraddr(NULL, &sysaddr) != 0) {
3399 bcopy(&sysaddr, hw->mac.addr, ETHERADDRL);
3400 found = B_TRUE;
3403 ddi_prop_free(bytes);
3407 * Finally(!), if there's a valid "mac-address" property (created
3408 * if we netbooted from this interface), we must use this instead
3409 * of any of the above to ensure that the NFS/install server doesn't
3410 * get confused by the address changing as Solaris takes over!
3412 err = ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, igb->dip,
3413 DDI_PROP_DONTPASS, "mac-address", &bytes, &nelts);
3414 if (err == DDI_PROP_SUCCESS) {
3415 if (nelts == ETHERADDRL) {
3416 while (nelts--)
3417 hw->mac.addr[nelts] = bytes[nelts];
3418 found = B_TRUE;
3420 ddi_prop_free(bytes);
3423 if (found) {
3424 bcopy(hw->mac.addr, hw->mac.perm_addr, ETHERADDRL);
3425 return (B_TRUE);
3427 #endif
3430 * Read the device MAC address from the EEPROM
3432 if (e1000_read_mac_addr(hw) != E1000_SUCCESS)
3433 return (B_FALSE);
3435 return (B_TRUE);
3438 #pragma inline(igb_arm_watchdog_timer)
3440 static void
3441 igb_arm_watchdog_timer(igb_t *igb)
3444 * Fire a watchdog timer
3446 igb->watchdog_tid =
3447 timeout(igb_local_timer,
3448 (void *)igb, 1 * drv_usectohz(1000000));
3453 * igb_enable_watchdog_timer - Enable and start the driver watchdog timer
3455 void
3456 igb_enable_watchdog_timer(igb_t *igb)
3458 mutex_enter(&igb->watchdog_lock);
3460 if (!igb->watchdog_enable) {
3461 igb->watchdog_enable = B_TRUE;
3462 igb->watchdog_start = B_TRUE;
3463 igb_arm_watchdog_timer(igb);
3466 mutex_exit(&igb->watchdog_lock);
3471 * igb_disable_watchdog_timer - Disable and stop the driver watchdog timer
3473 void
3474 igb_disable_watchdog_timer(igb_t *igb)
3476 timeout_id_t tid;
3478 mutex_enter(&igb->watchdog_lock);
3480 igb->watchdog_enable = B_FALSE;
3481 igb->watchdog_start = B_FALSE;
3482 tid = igb->watchdog_tid;
3483 igb->watchdog_tid = 0;
3485 mutex_exit(&igb->watchdog_lock);
3487 if (tid != 0)
3488 (void) untimeout(tid);
3493 * igb_start_watchdog_timer - Start the driver watchdog timer
3495 static void
3496 igb_start_watchdog_timer(igb_t *igb)
3498 mutex_enter(&igb->watchdog_lock);
3500 if (igb->watchdog_enable) {
3501 if (!igb->watchdog_start) {
3502 igb->watchdog_start = B_TRUE;
3503 igb_arm_watchdog_timer(igb);
3507 mutex_exit(&igb->watchdog_lock);
3511 * igb_restart_watchdog_timer - Restart the driver watchdog timer
3513 static void
3514 igb_restart_watchdog_timer(igb_t *igb)
3516 mutex_enter(&igb->watchdog_lock);
3518 if (igb->watchdog_start)
3519 igb_arm_watchdog_timer(igb);
3521 mutex_exit(&igb->watchdog_lock);
3525 * igb_stop_watchdog_timer - Stop the driver watchdog timer
3527 static void
3528 igb_stop_watchdog_timer(igb_t *igb)
3530 timeout_id_t tid;
3532 mutex_enter(&igb->watchdog_lock);
3534 igb->watchdog_start = B_FALSE;
3535 tid = igb->watchdog_tid;
3536 igb->watchdog_tid = 0;
3538 mutex_exit(&igb->watchdog_lock);
3540 if (tid != 0)
3541 (void) untimeout(tid);
3545 * igb_start_link_timer - Start the link setup timer
3547 static void
3548 igb_start_link_timer(struct igb *igb)
3550 struct e1000_hw *hw = &igb->hw;
3551 clock_t link_timeout;
3553 if (hw->mac.autoneg)
3554 link_timeout = PHY_AUTO_NEG_LIMIT *
3555 drv_usectohz(100000);
3556 else
3557 link_timeout = PHY_FORCE_LIMIT * drv_usectohz(100000);
3559 mutex_enter(&igb->link_lock);
3560 if (hw->phy.autoneg_wait_to_complete) {
3561 igb->link_complete = B_TRUE;
3562 } else {
3563 igb->link_complete = B_FALSE;
3564 igb->link_tid = timeout(igb_link_timer, (void *)igb,
3565 link_timeout);
3567 mutex_exit(&igb->link_lock);
3571 * igb_stop_link_timer - Stop the link setup timer
3573 static void
3574 igb_stop_link_timer(struct igb *igb)
3576 timeout_id_t tid;
3578 mutex_enter(&igb->link_lock);
3579 igb->link_complete = B_TRUE;
3580 tid = igb->link_tid;
3581 igb->link_tid = 0;
3582 mutex_exit(&igb->link_lock);
3584 if (tid != 0)
3585 (void) untimeout(tid);
3589 * igb_disable_adapter_interrupts - Clear/disable all hardware interrupts
3591 static void
3592 igb_disable_adapter_interrupts(igb_t *igb)
3594 struct e1000_hw *hw = &igb->hw;
3597 * Set the IMC register to mask all the interrupts,
3598 * including the tx interrupts.
3600 E1000_WRITE_REG(hw, E1000_IMC, ~0);
3601 E1000_WRITE_REG(hw, E1000_IAM, 0);
3604 * Additional disabling for MSI-X
3606 if (igb->intr_type == DDI_INTR_TYPE_MSIX) {
3607 E1000_WRITE_REG(hw, E1000_EIMC, ~0);
3608 E1000_WRITE_REG(hw, E1000_EIAC, 0);
3609 E1000_WRITE_REG(hw, E1000_EIAM, 0);
3612 E1000_WRITE_FLUSH(hw);
3616 * igb_enable_adapter_interrupts_82580 - Enable NIC interrupts for 82580
3618 static void
3619 igb_enable_adapter_interrupts_82580(igb_t *igb)
3621 struct e1000_hw *hw = &igb->hw;
3623 /* Clear any pending interrupts */
3624 (void) E1000_READ_REG(hw, E1000_ICR);
3625 igb->ims_mask |= E1000_IMS_DRSTA;
3627 if (igb->intr_type == DDI_INTR_TYPE_MSIX) {
3629 /* Interrupt enabling for MSI-X */
3630 E1000_WRITE_REG(hw, E1000_EIMS, igb->eims_mask);
3631 E1000_WRITE_REG(hw, E1000_EIAC, igb->eims_mask);
3632 igb->ims_mask = (E1000_IMS_LSC | E1000_IMS_DRSTA);
3633 E1000_WRITE_REG(hw, E1000_IMS, igb->ims_mask);
3634 } else { /* Interrupt enabling for MSI and legacy */
3635 E1000_WRITE_REG(hw, E1000_IVAR0, E1000_IVAR_VALID);
3636 igb->ims_mask = IMS_ENABLE_MASK | E1000_IMS_TXQE;
3637 igb->ims_mask |= E1000_IMS_DRSTA;
3638 E1000_WRITE_REG(hw, E1000_IMS, igb->ims_mask);
3641 /* Disable auto-mask for ICR interrupt bits */
3642 E1000_WRITE_REG(hw, E1000_IAM, 0);
3644 E1000_WRITE_FLUSH(hw);
3648 * igb_enable_adapter_interrupts_82576 - Enable NIC interrupts for 82576
3650 static void
3651 igb_enable_adapter_interrupts_82576(igb_t *igb)
3653 struct e1000_hw *hw = &igb->hw;
3655 /* Clear any pending interrupts */
3656 (void) E1000_READ_REG(hw, E1000_ICR);
3658 if (igb->intr_type == DDI_INTR_TYPE_MSIX) {
3660 /* Interrupt enabling for MSI-X */
3661 E1000_WRITE_REG(hw, E1000_EIMS, igb->eims_mask);
3662 E1000_WRITE_REG(hw, E1000_EIAC, igb->eims_mask);
3663 igb->ims_mask = E1000_IMS_LSC;
3664 E1000_WRITE_REG(hw, E1000_IMS, E1000_IMS_LSC);
3665 } else {
3666 /* Interrupt enabling for MSI and legacy */
3667 E1000_WRITE_REG(hw, E1000_IVAR0, E1000_IVAR_VALID);
3668 igb->ims_mask = IMS_ENABLE_MASK | E1000_IMS_TXQE;
3669 E1000_WRITE_REG(hw, E1000_IMS,
3670 (IMS_ENABLE_MASK | E1000_IMS_TXQE));
3673 /* Disable auto-mask for ICR interrupt bits */
3674 E1000_WRITE_REG(hw, E1000_IAM, 0);
3676 E1000_WRITE_FLUSH(hw);
3680 * igb_enable_adapter_interrupts_82575 - Enable NIC interrupts for 82575
3682 static void
3683 igb_enable_adapter_interrupts_82575(igb_t *igb)
3685 struct e1000_hw *hw = &igb->hw;
3686 uint32_t reg;
3688 /* Clear any pending interrupts */
3689 (void) E1000_READ_REG(hw, E1000_ICR);
3691 if (igb->intr_type == DDI_INTR_TYPE_MSIX) {
3692 /* Interrupt enabling for MSI-X */
3693 E1000_WRITE_REG(hw, E1000_EIMS, igb->eims_mask);
3694 E1000_WRITE_REG(hw, E1000_EIAC, igb->eims_mask);
3695 igb->ims_mask = E1000_IMS_LSC;
3696 E1000_WRITE_REG(hw, E1000_IMS, E1000_IMS_LSC);
3698 /* Enable MSI-X PBA support */
3699 reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
3700 reg |= E1000_CTRL_EXT_PBA_CLR;
3702 /* Non-selective interrupt clear-on-read */
3703 reg |= E1000_CTRL_EXT_IRCA; /* Called NSICR in the EAS */
3705 E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
3706 } else {
3707 /* Interrupt enabling for MSI and legacy */
3708 igb->ims_mask = IMS_ENABLE_MASK;
3709 E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK);
3712 E1000_WRITE_FLUSH(hw);
3716 * Loopback Support
3718 static lb_property_t lb_normal =
3719 { normal, "normal", IGB_LB_NONE };
3720 static lb_property_t lb_external =
3721 { external, "External", IGB_LB_EXTERNAL };
3722 static lb_property_t lb_phy =
3723 { internal, "PHY", IGB_LB_INTERNAL_PHY };
3724 static lb_property_t lb_serdes =
3725 { internal, "SerDes", IGB_LB_INTERNAL_SERDES };
3727 enum ioc_reply
3728 igb_loopback_ioctl(igb_t *igb, struct iocblk *iocp, mblk_t *mp)
3730 lb_info_sz_t *lbsp;
3731 lb_property_t *lbpp;
3732 struct e1000_hw *hw;
3733 uint32_t *lbmp;
3734 uint32_t size;
3735 uint32_t value;
3737 hw = &igb->hw;
3739 if (mp->b_cont == NULL)
3740 return (IOC_INVAL);
3742 switch (iocp->ioc_cmd) {
3743 default:
3744 return (IOC_INVAL);
3746 case LB_GET_INFO_SIZE:
3747 size = sizeof (lb_info_sz_t);
3748 if (iocp->ioc_count != size)
3749 return (IOC_INVAL);
3751 value = sizeof (lb_normal);
3752 if (hw->phy.media_type == e1000_media_type_copper)
3753 value += sizeof (lb_phy);
3754 else
3755 value += sizeof (lb_serdes);
3756 value += sizeof (lb_external);
3758 lbsp = (lb_info_sz_t *)(uintptr_t)mp->b_cont->b_rptr;
3759 *lbsp = value;
3760 break;
3762 case LB_GET_INFO:
3763 value = sizeof (lb_normal);
3764 if (hw->phy.media_type == e1000_media_type_copper)
3765 value += sizeof (lb_phy);
3766 else
3767 value += sizeof (lb_serdes);
3768 value += sizeof (lb_external);
3770 size = value;
3771 if (iocp->ioc_count != size)
3772 return (IOC_INVAL);
3774 value = 0;
3775 lbpp = (lb_property_t *)(uintptr_t)mp->b_cont->b_rptr;
3777 lbpp[value++] = lb_normal;
3778 if (hw->phy.media_type == e1000_media_type_copper)
3779 lbpp[value++] = lb_phy;
3780 else
3781 lbpp[value++] = lb_serdes;
3782 lbpp[value++] = lb_external;
3783 break;
3785 case LB_GET_MODE:
3786 size = sizeof (uint32_t);
3787 if (iocp->ioc_count != size)
3788 return (IOC_INVAL);
3790 lbmp = (uint32_t *)(uintptr_t)mp->b_cont->b_rptr;
3791 *lbmp = igb->loopback_mode;
3792 break;
3794 case LB_SET_MODE:
3795 size = 0;
3796 if (iocp->ioc_count != sizeof (uint32_t))
3797 return (IOC_INVAL);
3799 lbmp = (uint32_t *)(uintptr_t)mp->b_cont->b_rptr;
3800 if (!igb_set_loopback_mode(igb, *lbmp))
3801 return (IOC_INVAL);
3802 break;
3805 iocp->ioc_count = size;
3806 iocp->ioc_error = 0;
3808 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
3809 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
3810 return (IOC_INVAL);
3813 return (IOC_REPLY);
3817 * igb_set_loopback_mode - Setup loopback based on the loopback mode
3819 static boolean_t
3820 igb_set_loopback_mode(igb_t *igb, uint32_t mode)
3822 struct e1000_hw *hw;
3823 int i;
3825 if (mode == igb->loopback_mode)
3826 return (B_TRUE);
3828 hw = &igb->hw;
3830 igb->loopback_mode = mode;
3832 if (mode == IGB_LB_NONE) {
3833 /* Reset the chip */
3834 hw->phy.autoneg_wait_to_complete = B_TRUE;
3835 (void) igb_reset(igb);
3836 hw->phy.autoneg_wait_to_complete = B_FALSE;
3837 return (B_TRUE);
3840 mutex_enter(&igb->gen_lock);
3842 switch (mode) {
3843 default:
3844 mutex_exit(&igb->gen_lock);
3845 return (B_FALSE);
3847 case IGB_LB_EXTERNAL:
3848 igb_set_external_loopback(igb);
3849 break;
3851 case IGB_LB_INTERNAL_PHY:
3852 igb_set_internal_phy_loopback(igb);
3853 break;
3855 case IGB_LB_INTERNAL_SERDES:
3856 igb_set_internal_serdes_loopback(igb);
3857 break;
3860 mutex_exit(&igb->gen_lock);
3863 * When external loopback is set, wait up to 1000ms to get the link up.
3864 * According to test, 1000ms can work and it's an experimental value.
3866 if (mode == IGB_LB_EXTERNAL) {
3867 for (i = 0; i <= 10; i++) {
3868 mutex_enter(&igb->gen_lock);
3869 (void) igb_link_check(igb);
3870 mutex_exit(&igb->gen_lock);
3872 if (igb->link_state == LINK_STATE_UP)
3873 break;
3875 msec_delay(100);
3878 if (igb->link_state != LINK_STATE_UP) {
3880 * Does not support external loopback.
3881 * Reset driver to loopback none.
3883 igb->loopback_mode = IGB_LB_NONE;
3885 /* Reset the chip */
3886 hw->phy.autoneg_wait_to_complete = B_TRUE;
3887 (void) igb_reset(igb);
3888 hw->phy.autoneg_wait_to_complete = B_FALSE;
3890 IGB_DEBUGLOG_0(igb, "Set external loopback failed, "
3891 "reset to loopback none.");
3893 return (B_FALSE);
3897 return (B_TRUE);
3901 * igb_set_external_loopback - Set the external loopback mode
3903 static void
3904 igb_set_external_loopback(igb_t *igb)
3906 struct e1000_hw *hw;
3907 uint32_t ctrl_ext;
3909 hw = &igb->hw;
3911 /* Set link mode to PHY (00b) in the Extended Control register */
3912 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
3913 ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
3914 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
3916 (void) e1000_write_phy_reg(hw, 0x0, 0x0140);
3917 (void) e1000_write_phy_reg(hw, 0x9, 0x1a00);
3918 (void) e1000_write_phy_reg(hw, 0x12, 0x1610);
3919 (void) e1000_write_phy_reg(hw, 0x1f37, 0x3f1c);
3923 * igb_set_internal_phy_loopback - Set the internal PHY loopback mode
3925 static void
3926 igb_set_internal_phy_loopback(igb_t *igb)
3928 struct e1000_hw *hw;
3929 uint32_t ctrl_ext;
3930 uint16_t phy_ctrl;
3931 uint16_t phy_pconf;
3933 hw = &igb->hw;
3935 /* Set link mode to PHY (00b) in the Extended Control register */
3936 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
3937 ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
3938 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
3941 * Set PHY control register (0x4140):
3942 * Set full duplex mode
3943 * Set loopback bit
3944 * Clear auto-neg enable bit
3945 * Set PHY speed
3947 phy_ctrl = MII_CR_FULL_DUPLEX | MII_CR_SPEED_1000 | MII_CR_LOOPBACK;
3948 (void) e1000_write_phy_reg(hw, PHY_CONTROL, phy_ctrl);
3950 /* Set the link disable bit in the Port Configuration register */
3951 (void) e1000_read_phy_reg(hw, 0x10, &phy_pconf);
3952 phy_pconf |= (uint16_t)1 << 14;
3953 (void) e1000_write_phy_reg(hw, 0x10, phy_pconf);
3957 * igb_set_internal_serdes_loopback - Set the internal SerDes loopback mode
3959 static void
3960 igb_set_internal_serdes_loopback(igb_t *igb)
3962 struct e1000_hw *hw;
3963 uint32_t ctrl_ext;
3964 uint32_t ctrl;
3965 uint32_t pcs_lctl;
3966 uint32_t connsw;
3968 hw = &igb->hw;
3970 /* Set link mode to SerDes (11b) in the Extended Control register */
3971 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
3972 ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
3973 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
3975 /* Configure the SerDes to loopback */
3976 E1000_WRITE_REG(hw, E1000_SCTL, 0x410);
3978 /* Set Device Control register */
3979 ctrl = E1000_READ_REG(hw, E1000_CTRL);
3980 ctrl |= (E1000_CTRL_FD | /* Force full duplex */
3981 E1000_CTRL_SLU); /* Force link up */
3982 ctrl &= ~(E1000_CTRL_RFCE | /* Disable receive flow control */
3983 E1000_CTRL_TFCE | /* Disable transmit flow control */
3984 E1000_CTRL_LRST); /* Clear link reset */
3985 E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
3987 /* Set PCS Link Control register */
3988 pcs_lctl = E1000_READ_REG(hw, E1000_PCS_LCTL);
3989 pcs_lctl |= (E1000_PCS_LCTL_FORCE_LINK |
3990 E1000_PCS_LCTL_FSD |
3991 E1000_PCS_LCTL_FDV_FULL |
3992 E1000_PCS_LCTL_FLV_LINK_UP);
3993 pcs_lctl &= ~E1000_PCS_LCTL_AN_ENABLE;
3994 E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_lctl);
3996 /* Set the Copper/Fiber Switch Control - CONNSW register */
3997 connsw = E1000_READ_REG(hw, E1000_CONNSW);
3998 connsw &= ~E1000_CONNSW_ENRGSRC;
3999 E1000_WRITE_REG(hw, E1000_CONNSW, connsw);
4002 #pragma inline(igb_intr_rx_work)
4004 * igb_intr_rx_work - rx processing of ISR
4006 static void
4007 igb_intr_rx_work(igb_rx_ring_t *rx_ring)
4009 mblk_t *mp;
4011 mutex_enter(&rx_ring->rx_lock);
4012 mp = igb_rx(rx_ring, IGB_NO_POLL);
4013 mutex_exit(&rx_ring->rx_lock);
4015 if (mp != NULL)
4016 mac_rx_ring(rx_ring->igb->mac_hdl, rx_ring->ring_handle, mp,
4017 rx_ring->ring_gen_num);
4020 #pragma inline(igb_intr_tx_work)
4022 * igb_intr_tx_work - tx processing of ISR
4024 static void
4025 igb_intr_tx_work(igb_tx_ring_t *tx_ring)
4027 igb_t *igb = tx_ring->igb;
4029 /* Recycle the tx descriptors */
4030 tx_ring->tx_recycle(tx_ring);
4032 /* Schedule the re-transmit */
4033 if (tx_ring->reschedule &&
4034 (tx_ring->tbd_free >= igb->tx_resched_thresh)) {
4035 tx_ring->reschedule = B_FALSE;
4036 mac_tx_ring_update(tx_ring->igb->mac_hdl, tx_ring->ring_handle);
4037 IGB_DEBUG_STAT(tx_ring->stat_reschedule);
4041 #pragma inline(igb_intr_link_work)
4043 * igb_intr_link_work - link-status-change processing of ISR
4045 static void
4046 igb_intr_link_work(igb_t *igb)
4048 boolean_t link_changed;
4050 igb_stop_watchdog_timer(igb);
4052 mutex_enter(&igb->gen_lock);
4055 * Because we got a link-status-change interrupt, force
4056 * e1000_check_for_link() to look at phy
4058 igb->hw.mac.get_link_status = B_TRUE;
4060 /* igb_link_check takes care of link status change */
4061 link_changed = igb_link_check(igb);
4063 /* Get new phy state */
4064 igb_get_phy_state(igb);
4066 mutex_exit(&igb->gen_lock);
4068 if (link_changed)
4069 mac_link_update(igb->mac_hdl, igb->link_state);
4071 igb_start_watchdog_timer(igb);
4075 * igb_intr_legacy - Interrupt handler for legacy interrupts
4077 static uint_t
4078 igb_intr_legacy(void *arg1, void *arg2)
4080 igb_t *igb = (igb_t *)arg1;
4081 igb_tx_ring_t *tx_ring;
4082 uint32_t icr;
4083 mblk_t *mp;
4084 boolean_t tx_reschedule;
4085 boolean_t link_changed;
4086 uint_t result;
4088 _NOTE(ARGUNUSED(arg2));
4090 mutex_enter(&igb->gen_lock);
4092 if (igb->igb_state & IGB_SUSPENDED) {
4093 mutex_exit(&igb->gen_lock);
4094 return (DDI_INTR_UNCLAIMED);
4097 mp = NULL;
4098 tx_reschedule = B_FALSE;
4099 link_changed = B_FALSE;
4100 icr = E1000_READ_REG(&igb->hw, E1000_ICR);
4102 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
4103 mutex_exit(&igb->gen_lock);
4104 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
4105 atomic_or_32(&igb->igb_state, IGB_ERROR);
4106 return (DDI_INTR_UNCLAIMED);
4109 if (icr & E1000_ICR_INT_ASSERTED) {
4111 * E1000_ICR_INT_ASSERTED bit was set:
4112 * Read(Clear) the ICR, claim this interrupt,
4113 * look for work to do.
4115 ASSERT(igb->num_rx_rings == 1);
4116 ASSERT(igb->num_tx_rings == 1);
4118 /* Make sure all interrupt causes cleared */
4119 (void) E1000_READ_REG(&igb->hw, E1000_EICR);
4121 if (icr & E1000_ICR_RXT0) {
4122 mp = igb_rx(&igb->rx_rings[0], IGB_NO_POLL);
4125 if (icr & E1000_ICR_TXDW) {
4126 tx_ring = &igb->tx_rings[0];
4128 /* Recycle the tx descriptors */
4129 tx_ring->tx_recycle(tx_ring);
4131 /* Schedule the re-transmit */
4132 tx_reschedule = (tx_ring->reschedule &&
4133 (tx_ring->tbd_free >= igb->tx_resched_thresh));
4136 if (icr & E1000_ICR_LSC) {
4138 * Because we got a link-status-change interrupt, force
4139 * e1000_check_for_link() to look at phy
4141 igb->hw.mac.get_link_status = B_TRUE;
4143 /* igb_link_check takes care of link status change */
4144 link_changed = igb_link_check(igb);
4146 /* Get new phy state */
4147 igb_get_phy_state(igb);
4150 if (icr & E1000_ICR_DRSTA) {
4151 /* 82580 Full Device Reset needed */
4152 atomic_or_32(&igb->igb_state, IGB_STALL);
4155 result = DDI_INTR_CLAIMED;
4156 } else {
4158 * E1000_ICR_INT_ASSERTED bit was not set:
4159 * Don't claim this interrupt.
4161 result = DDI_INTR_UNCLAIMED;
4164 mutex_exit(&igb->gen_lock);
4167 * Do the following work outside of the gen_lock
4169 if (mp != NULL)
4170 mac_rx(igb->mac_hdl, NULL, mp);
4172 if (tx_reschedule) {
4173 tx_ring->reschedule = B_FALSE;
4174 mac_tx_ring_update(igb->mac_hdl, tx_ring->ring_handle);
4175 IGB_DEBUG_STAT(tx_ring->stat_reschedule);
4178 if (link_changed)
4179 mac_link_update(igb->mac_hdl, igb->link_state);
4181 return (result);
4185 * igb_intr_msi - Interrupt handler for MSI
4187 static uint_t
4188 igb_intr_msi(void *arg1, void *arg2)
4190 igb_t *igb = (igb_t *)arg1;
4191 uint32_t icr;
4193 _NOTE(ARGUNUSED(arg2));
4195 icr = E1000_READ_REG(&igb->hw, E1000_ICR);
4197 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
4198 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
4199 atomic_or_32(&igb->igb_state, IGB_ERROR);
4200 return (DDI_INTR_CLAIMED);
4203 /* Make sure all interrupt causes cleared */
4204 (void) E1000_READ_REG(&igb->hw, E1000_EICR);
4207 * For MSI interrupt, we have only one vector,
4208 * so we have only one rx ring and one tx ring enabled.
4210 ASSERT(igb->num_rx_rings == 1);
4211 ASSERT(igb->num_tx_rings == 1);
4213 if (icr & E1000_ICR_RXT0) {
4214 igb_intr_rx_work(&igb->rx_rings[0]);
4217 if (icr & E1000_ICR_TXDW) {
4218 igb_intr_tx_work(&igb->tx_rings[0]);
4221 if (icr & E1000_ICR_LSC) {
4222 igb_intr_link_work(igb);
4225 if (icr & E1000_ICR_DRSTA) {
4226 /* 82580 Full Device Reset needed */
4227 atomic_or_32(&igb->igb_state, IGB_STALL);
4230 return (DDI_INTR_CLAIMED);
4234 * igb_intr_rx - Interrupt handler for rx
4236 static uint_t
4237 igb_intr_rx(void *arg1, void *arg2)
4239 igb_rx_ring_t *rx_ring = (igb_rx_ring_t *)arg1;
4241 _NOTE(ARGUNUSED(arg2));
4244 * Only used via MSI-X vector so don't check cause bits
4245 * and only clean the given ring.
4247 igb_intr_rx_work(rx_ring);
4249 return (DDI_INTR_CLAIMED);
4253 * igb_intr_tx - Interrupt handler for tx
4255 static uint_t
4256 igb_intr_tx(void *arg1, void *arg2)
4258 igb_tx_ring_t *tx_ring = (igb_tx_ring_t *)arg1;
4260 _NOTE(ARGUNUSED(arg2));
4263 * Only used via MSI-X vector so don't check cause bits
4264 * and only clean the given ring.
4266 igb_intr_tx_work(tx_ring);
4268 return (DDI_INTR_CLAIMED);
4272 * igb_intr_tx_other - Interrupt handler for both tx and other
4275 static uint_t
4276 igb_intr_tx_other(void *arg1, void *arg2)
4278 igb_t *igb = (igb_t *)arg1;
4279 uint32_t icr;
4281 _NOTE(ARGUNUSED(arg2));
4283 icr = E1000_READ_REG(&igb->hw, E1000_ICR);
4285 if (igb_check_acc_handle(igb->osdep.reg_handle) != DDI_FM_OK) {
4286 ddi_fm_service_impact(igb->dip, DDI_SERVICE_DEGRADED);
4287 atomic_or_32(&igb->igb_state, IGB_ERROR);
4288 return (DDI_INTR_CLAIMED);
4292 * Look for tx reclaiming work first. Remember, in the
4293 * case of only interrupt sharing, only one tx ring is
4294 * used
4296 igb_intr_tx_work(&igb->tx_rings[0]);
4299 * Check for "other" causes.
4301 if (icr & E1000_ICR_LSC) {
4302 igb_intr_link_work(igb);
4306 * The DOUTSYNC bit indicates a tx packet dropped because
4307 * DMA engine gets "out of sync". There isn't a real fix
4308 * for this. The Intel recommendation is to count the number
4309 * of occurrences so user can detect when it is happening.
4310 * The issue is non-fatal and there's no recovery action
4311 * available.
4313 if (icr & E1000_ICR_DOUTSYNC) {
4314 IGB_STAT(igb->dout_sync);
4317 if (icr & E1000_ICR_DRSTA) {
4318 /* 82580 Full Device Reset needed */
4319 atomic_or_32(&igb->igb_state, IGB_STALL);
4322 return (DDI_INTR_CLAIMED);
4326 * igb_alloc_intrs - Allocate interrupts for the driver
4328 * Normal sequence is to try MSI-X; if not sucessful, try MSI;
4329 * if not successful, try Legacy.
4330 * igb->intr_force can be used to force sequence to start with
4331 * any of the 3 types.
4332 * If MSI-X is not used, number of tx/rx rings is forced to 1.
4334 static int
4335 igb_alloc_intrs(igb_t *igb)
4337 dev_info_t *devinfo;
4338 int intr_types;
4339 int rc;
4341 devinfo = igb->dip;
4343 /* Get supported interrupt types */
4344 rc = ddi_intr_get_supported_types(devinfo, &intr_types);
4346 if (rc != DDI_SUCCESS) {
4347 igb_log(igb,
4348 "Get supported interrupt types failed: %d", rc);
4349 return (IGB_FAILURE);
4351 IGB_DEBUGLOG_1(igb, "Supported interrupt types: %x", intr_types);
4353 igb->intr_type = 0;
4355 /* Install MSI-X interrupts */
4356 if ((intr_types & DDI_INTR_TYPE_MSIX) &&
4357 (igb->intr_force <= IGB_INTR_MSIX)) {
4358 rc = igb_alloc_intr_handles(igb, DDI_INTR_TYPE_MSIX);
4360 if (rc == IGB_SUCCESS)
4361 return (IGB_SUCCESS);
4363 igb_log(igb,
4364 "Allocate MSI-X failed, trying MSI interrupts...");
4367 /* MSI-X not used, force rings to 1 */
4368 igb->num_rx_rings = 1;
4369 igb->num_tx_rings = 1;
4370 igb_log(igb,
4371 "MSI-X not used, force rx and tx queue number to 1");
4373 /* Install MSI interrupts */
4374 if ((intr_types & DDI_INTR_TYPE_MSI) &&
4375 (igb->intr_force <= IGB_INTR_MSI)) {
4376 rc = igb_alloc_intr_handles(igb, DDI_INTR_TYPE_MSI);
4378 if (rc == IGB_SUCCESS)
4379 return (IGB_SUCCESS);
4381 igb_log(igb,
4382 "Allocate MSI failed, trying Legacy interrupts...");
4385 /* Install legacy interrupts */
4386 if (intr_types & DDI_INTR_TYPE_FIXED) {
4387 rc = igb_alloc_intr_handles(igb, DDI_INTR_TYPE_FIXED);
4389 if (rc == IGB_SUCCESS)
4390 return (IGB_SUCCESS);
4392 igb_log(igb,
4393 "Allocate Legacy interrupts failed");
4396 /* If none of the 3 types succeeded, return failure */
4397 return (IGB_FAILURE);
4401 * igb_alloc_intr_handles - Allocate interrupt handles.
4403 * For legacy and MSI, only 1 handle is needed. For MSI-X,
4404 * if fewer than 2 handles are available, return failure.
4405 * Upon success, this sets the number of Rx rings to a number that
4406 * matches the handles available for Rx interrupts.
4408 static int
4409 igb_alloc_intr_handles(igb_t *igb, int intr_type)
4411 dev_info_t *devinfo;
4412 int orig, request, count, avail, actual;
4413 int diff, minimum;
4414 int rc;
4416 devinfo = igb->dip;
4418 switch (intr_type) {
4419 case DDI_INTR_TYPE_FIXED:
4420 request = 1; /* Request 1 legacy interrupt handle */
4421 minimum = 1;
4422 IGB_DEBUGLOG_0(igb, "interrupt type: legacy");
4423 break;
4425 case DDI_INTR_TYPE_MSI:
4426 request = 1; /* Request 1 MSI interrupt handle */
4427 minimum = 1;
4428 IGB_DEBUGLOG_0(igb, "interrupt type: MSI");
4429 break;
4431 case DDI_INTR_TYPE_MSIX:
4433 * Number of vectors for the adapter is
4434 * # rx rings + # tx rings
4435 * One of tx vectors is for tx & other
4437 request = igb->num_rx_rings + igb->num_tx_rings;
4438 orig = request;
4439 minimum = 2;
4440 IGB_DEBUGLOG_0(igb, "interrupt type: MSI-X");
4441 break;
4443 default:
4444 igb_log(igb,
4445 "invalid call to igb_alloc_intr_handles(): %d\n",
4446 intr_type);
4447 return (IGB_FAILURE);
4449 IGB_DEBUGLOG_2(igb, "interrupt handles requested: %d minimum: %d",
4450 request, minimum);
4453 * Get number of supported interrupts
4455 rc = ddi_intr_get_nintrs(devinfo, intr_type, &count);
4456 if ((rc != DDI_SUCCESS) || (count < minimum)) {
4457 igb_log(igb,
4458 "Get supported interrupt number failed. "
4459 "Return: %d, count: %d", rc, count);
4460 return (IGB_FAILURE);
4462 IGB_DEBUGLOG_1(igb, "interrupts supported: %d", count);
4465 * Get number of available interrupts
4467 rc = ddi_intr_get_navail(devinfo, intr_type, &avail);
4468 if ((rc != DDI_SUCCESS) || (avail < minimum)) {
4469 igb_log(igb,
4470 "Get available interrupt number failed. "
4471 "Return: %d, available: %d", rc, avail);
4472 return (IGB_FAILURE);
4474 IGB_DEBUGLOG_1(igb, "interrupts available: %d", avail);
4476 if (avail < request) {
4477 igb_log(igb, "Request %d handles, %d available",
4478 request, avail);
4479 request = avail;
4482 actual = 0;
4483 igb->intr_cnt = 0;
4486 * Allocate an array of interrupt handles
4488 igb->intr_size = request * sizeof (ddi_intr_handle_t);
4489 igb->htable = kmem_alloc(igb->intr_size, KM_SLEEP);
4491 rc = ddi_intr_alloc(devinfo, igb->htable, intr_type, 0,
4492 request, &actual, DDI_INTR_ALLOC_NORMAL);
4493 if (rc != DDI_SUCCESS) {
4494 igb_log(igb, "Allocate interrupts failed. "
4495 "return: %d, request: %d, actual: %d",
4496 rc, request, actual);
4497 goto alloc_handle_fail;
4499 IGB_DEBUGLOG_1(igb, "interrupts actually allocated: %d", actual);
4501 igb->intr_cnt = actual;
4503 if (actual < minimum) {
4504 igb_log(igb, "Insufficient interrupt handles allocated: %d",
4505 actual);
4506 goto alloc_handle_fail;
4510 * For MSI-X, actual might force us to reduce number of tx & rx rings
4512 if ((intr_type == DDI_INTR_TYPE_MSIX) && (orig > actual)) {
4513 diff = orig - actual;
4514 if (diff < igb->num_tx_rings) {
4515 igb_log(igb,
4516 "MSI-X vectors force Tx queue number to %d",
4517 igb->num_tx_rings - diff);
4518 igb->num_tx_rings -= diff;
4519 } else {
4520 igb_log(igb,
4521 "MSI-X vectors force Tx queue number to 1");
4522 igb->num_tx_rings = 1;
4524 igb_log(igb,
4525 "MSI-X vectors force Rx queue number to %d",
4526 actual - 1);
4527 igb->num_rx_rings = actual - 1;
4532 * Get priority for first vector, assume remaining are all the same
4534 rc = ddi_intr_get_pri(igb->htable[0], &igb->intr_pri);
4535 if (rc != DDI_SUCCESS) {
4536 igb_log(igb,
4537 "Get interrupt priority failed: %d", rc);
4538 goto alloc_handle_fail;
4541 rc = ddi_intr_get_cap(igb->htable[0], &igb->intr_cap);
4542 if (rc != DDI_SUCCESS) {
4543 igb_log(igb,
4544 "Get interrupt cap failed: %d", rc);
4545 goto alloc_handle_fail;
4548 igb->intr_type = intr_type;
4550 return (IGB_SUCCESS);
4552 alloc_handle_fail:
4553 igb_rem_intrs(igb);
4555 return (IGB_FAILURE);
4559 * igb_add_intr_handlers - Add interrupt handlers based on the interrupt type
4561 * Before adding the interrupt handlers, the interrupt vectors have
4562 * been allocated, and the rx/tx rings have also been allocated.
4564 static int
4565 igb_add_intr_handlers(igb_t *igb)
4567 igb_rx_ring_t *rx_ring;
4568 igb_tx_ring_t *tx_ring;
4569 int vector;
4570 int rc;
4571 int i;
4573 vector = 0;
4575 switch (igb->intr_type) {
4576 case DDI_INTR_TYPE_MSIX:
4577 /* Add interrupt handler for tx + other */
4578 tx_ring = &igb->tx_rings[0];
4579 rc = ddi_intr_add_handler(igb->htable[vector],
4580 (ddi_intr_handler_t *)igb_intr_tx_other,
4581 (void *)igb, NULL);
4583 if (rc != DDI_SUCCESS) {
4584 igb_log(igb,
4585 "Add tx/other interrupt handler failed: %d", rc);
4586 return (IGB_FAILURE);
4588 tx_ring->intr_vector = vector;
4589 vector++;
4591 /* Add interrupt handler for each rx ring */
4592 for (i = 0; i < igb->num_rx_rings; i++) {
4593 rx_ring = &igb->rx_rings[i];
4595 rc = ddi_intr_add_handler(igb->htable[vector],
4596 (ddi_intr_handler_t *)igb_intr_rx,
4597 (void *)rx_ring, NULL);
4599 if (rc != DDI_SUCCESS) {
4600 igb_log(igb,
4601 "Add rx interrupt handler failed. "
4602 "return: %d, rx ring: %d", rc, i);
4603 for (vector--; vector >= 0; vector--) {
4604 (void) ddi_intr_remove_handler(
4605 igb->htable[vector]);
4607 return (IGB_FAILURE);
4610 rx_ring->intr_vector = vector;
4612 vector++;
4615 /* Add interrupt handler for each tx ring from 2nd ring */
4616 for (i = 1; i < igb->num_tx_rings; i++) {
4617 tx_ring = &igb->tx_rings[i];
4619 rc = ddi_intr_add_handler(igb->htable[vector],
4620 (ddi_intr_handler_t *)igb_intr_tx,
4621 (void *)tx_ring, NULL);
4623 if (rc != DDI_SUCCESS) {
4624 igb_log(igb,
4625 "Add tx interrupt handler failed. "
4626 "return: %d, tx ring: %d", rc, i);
4627 for (vector--; vector >= 0; vector--) {
4628 (void) ddi_intr_remove_handler(
4629 igb->htable[vector]);
4631 return (IGB_FAILURE);
4634 tx_ring->intr_vector = vector;
4636 vector++;
4639 break;
4641 case DDI_INTR_TYPE_MSI:
4642 /* Add interrupt handlers for the only vector */
4643 rc = ddi_intr_add_handler(igb->htable[vector],
4644 (ddi_intr_handler_t *)igb_intr_msi,
4645 (void *)igb, NULL);
4647 if (rc != DDI_SUCCESS) {
4648 igb_log(igb,
4649 "Add MSI interrupt handler failed: %d", rc);
4650 return (IGB_FAILURE);
4653 rx_ring = &igb->rx_rings[0];
4654 rx_ring->intr_vector = vector;
4656 vector++;
4657 break;
4659 case DDI_INTR_TYPE_FIXED:
4660 /* Add interrupt handlers for the only vector */
4661 rc = ddi_intr_add_handler(igb->htable[vector],
4662 (ddi_intr_handler_t *)igb_intr_legacy,
4663 (void *)igb, NULL);
4665 if (rc != DDI_SUCCESS) {
4666 igb_log(igb,
4667 "Add legacy interrupt handler failed: %d", rc);
4668 return (IGB_FAILURE);
4671 rx_ring = &igb->rx_rings[0];
4672 rx_ring->intr_vector = vector;
4674 vector++;
4675 break;
4677 default:
4678 return (IGB_FAILURE);
4681 ASSERT(vector == igb->intr_cnt);
4683 return (IGB_SUCCESS);
4687 * igb_setup_msix_82575 - setup 82575 adapter to use MSI-X interrupts
4689 * For each vector enabled on the adapter, Set the MSIXBM register accordingly
4691 static void
4692 igb_setup_msix_82575(igb_t *igb)
4694 uint32_t eims = 0;
4695 int i, vector;
4696 struct e1000_hw *hw = &igb->hw;
4699 * Set vector for tx ring 0 and other causes.
4700 * NOTE assumption that it is vector 0.
4702 vector = 0;
4704 igb->eims_mask = E1000_EICR_TX_QUEUE0 | E1000_EICR_OTHER;
4705 E1000_WRITE_REG(hw, E1000_MSIXBM(vector), igb->eims_mask);
4706 vector++;
4708 for (i = 0; i < igb->num_rx_rings; i++) {
4710 * Set vector for each rx ring
4712 eims = (E1000_EICR_RX_QUEUE0 << i);
4713 E1000_WRITE_REG(hw, E1000_MSIXBM(vector), eims);
4716 * Accumulate bits to enable in
4717 * igb_enable_adapter_interrupts_82575()
4719 igb->eims_mask |= eims;
4721 vector++;
4724 for (i = 1; i < igb->num_tx_rings; i++) {
4726 * Set vector for each tx ring from 2nd tx ring
4728 eims = (E1000_EICR_TX_QUEUE0 << i);
4729 E1000_WRITE_REG(hw, E1000_MSIXBM(vector), eims);
4732 * Accumulate bits to enable in
4733 * igb_enable_adapter_interrupts_82575()
4735 igb->eims_mask |= eims;
4737 vector++;
4740 ASSERT(vector == igb->intr_cnt);
4743 * Disable IAM for ICR interrupt bits
4745 E1000_WRITE_REG(hw, E1000_IAM, 0);
4746 E1000_WRITE_FLUSH(hw);
4750 * igb_setup_msix_82576 - setup 82576 adapter to use MSI-X interrupts
4752 * 82576 uses a table based method for assigning vectors. Each queue has a
4753 * single entry in the table to which we write a vector number along with a
4754 * "valid" bit. The entry is a single byte in a 4-byte register. Vectors
4755 * take a different position in the 4-byte register depending on whether
4756 * they are numbered above or below 8.
4758 static void
4759 igb_setup_msix_82576(igb_t *igb)
4761 struct e1000_hw *hw = &igb->hw;
4762 uint32_t ivar, index, vector;
4763 int i;
4765 /* must enable msi-x capability before IVAR settings */
4766 E1000_WRITE_REG(hw, E1000_GPIE,
4767 (E1000_GPIE_MSIX_MODE | E1000_GPIE_PBA | E1000_GPIE_NSICR));
4770 * Set vector for tx ring 0 and other causes.
4771 * NOTE assumption that it is vector 0.
4772 * This is also interdependent with installation of interrupt service
4773 * routines in igb_add_intr_handlers().
4776 /* assign "other" causes to vector 0 */
4777 vector = 0;
4778 ivar = ((vector | E1000_IVAR_VALID) << 8);
4779 E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar);
4781 /* assign tx ring 0 to vector 0 */
4782 ivar = ((vector | E1000_IVAR_VALID) << 8);
4783 E1000_WRITE_REG(hw, E1000_IVAR0, ivar);
4785 /* prepare to enable tx & other interrupt causes */
4786 igb->eims_mask = (1 << vector);
4788 vector ++;
4789 for (i = 0; i < igb->num_rx_rings; i++) {
4791 * Set vector for each rx ring
4793 index = (i & 0x7);
4794 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
4796 if (i < 8) {
4797 /* vector goes into low byte of register */
4798 ivar = ivar & 0xFFFFFF00;
4799 ivar |= (vector | E1000_IVAR_VALID);
4800 } else {
4801 /* vector goes into third byte of register */
4802 ivar = ivar & 0xFF00FFFF;
4803 ivar |= ((vector | E1000_IVAR_VALID) << 16);
4805 E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
4807 /* Accumulate interrupt-cause bits to enable */
4808 igb->eims_mask |= (1 << vector);
4810 vector ++;
4813 for (i = 1; i < igb->num_tx_rings; i++) {
4815 * Set vector for each tx ring from 2nd tx ring.
4816 * Note assumption that tx vectors numericall follow rx vectors.
4818 index = (i & 0x7);
4819 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
4821 if (i < 8) {
4822 /* vector goes into second byte of register */
4823 ivar = ivar & 0xFFFF00FF;
4824 ivar |= ((vector | E1000_IVAR_VALID) << 8);
4825 } else {
4826 /* vector goes into fourth byte of register */
4827 ivar = ivar & 0x00FFFFFF;
4828 ivar |= (vector | E1000_IVAR_VALID) << 24;
4830 E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
4832 /* Accumulate interrupt-cause bits to enable */
4833 igb->eims_mask |= (1 << vector);
4835 vector ++;
4838 ASSERT(vector == igb->intr_cnt);
4842 * igb_setup_msix_82580 - setup 82580 adapter to use MSI-X interrupts
4844 * 82580 uses same table approach at 82576 but has fewer entries. Each
4845 * queue has a single entry in the table to which we write a vector number
4846 * along with a "valid" bit. Vectors take a different position in the
4847 * register depending on * whether * they are numbered above or below 4.
4849 static void
4850 igb_setup_msix_82580(igb_t *igb)
4852 struct e1000_hw *hw = &igb->hw;
4853 uint32_t ivar, index, vector;
4854 int i;
4856 /* must enable msi-x capability before IVAR settings */
4857 E1000_WRITE_REG(hw, E1000_GPIE, (E1000_GPIE_MSIX_MODE |
4858 E1000_GPIE_PBA | E1000_GPIE_NSICR | E1000_GPIE_EIAME));
4860 * Set vector for tx ring 0 and other causes.
4861 * NOTE assumption that it is vector 0.
4862 * This is also interdependent with installation of interrupt service
4863 * routines in igb_add_intr_handlers().
4866 /* assign "other" causes to vector 0 */
4867 vector = 0;
4868 ivar = ((vector | E1000_IVAR_VALID) << 8);
4869 E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar);
4871 /* assign tx ring 0 to vector 0 */
4872 ivar = ((vector | E1000_IVAR_VALID) << 8);
4873 E1000_WRITE_REG(hw, E1000_IVAR0, ivar);
4875 /* prepare to enable tx & other interrupt causes */
4876 igb->eims_mask = (1 << vector);
4878 vector ++;
4880 for (i = 0; i < igb->num_rx_rings; i++) {
4882 * Set vector for each rx ring
4884 index = (i >> 1);
4885 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
4887 if (i & 1) {
4888 /* vector goes into third byte of register */
4889 ivar = ivar & 0xFF00FFFF;
4890 ivar |= ((vector | E1000_IVAR_VALID) << 16);
4891 } else {
4892 /* vector goes into low byte of register */
4893 ivar = ivar & 0xFFFFFF00;
4894 ivar |= (vector | E1000_IVAR_VALID);
4896 E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
4898 /* Accumulate interrupt-cause bits to enable */
4899 igb->eims_mask |= (1 << vector);
4901 vector ++;
4904 for (i = 1; i < igb->num_tx_rings; i++) {
4906 * Set vector for each tx ring from 2nd tx ring.
4907 * Note assumption that tx vectors numericall follow rx vectors.
4909 index = (i >> 1);
4910 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index);
4912 if (i & 1) {
4913 /* vector goes into high byte of register */
4914 ivar = ivar & 0x00FFFFFF;
4915 ivar |= ((vector | E1000_IVAR_VALID) << 24);
4916 } else {
4917 /* vector goes into second byte of register */
4918 ivar = ivar & 0xFFFF00FF;
4919 ivar |= (vector | E1000_IVAR_VALID) << 8;
4921 E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar);
4923 /* Accumulate interrupt-cause bits to enable */
4924 igb->eims_mask |= (1 << vector);
4926 vector ++;
4928 ASSERT(vector == igb->intr_cnt);
4932 * igb_rem_intr_handlers - remove the interrupt handlers
4934 static void
4935 igb_rem_intr_handlers(igb_t *igb)
4937 int i;
4938 int rc;
4940 for (i = 0; i < igb->intr_cnt; i++) {
4941 rc = ddi_intr_remove_handler(igb->htable[i]);
4942 if (rc != DDI_SUCCESS) {
4943 IGB_DEBUGLOG_1(igb,
4944 "Remove intr handler failed: %d", rc);
4950 * igb_rem_intrs - remove the allocated interrupts
4952 static void
4953 igb_rem_intrs(igb_t *igb)
4955 int i;
4956 int rc;
4958 for (i = 0; i < igb->intr_cnt; i++) {
4959 rc = ddi_intr_free(igb->htable[i]);
4960 if (rc != DDI_SUCCESS) {
4961 IGB_DEBUGLOG_1(igb,
4962 "Free intr failed: %d", rc);
4966 kmem_free(igb->htable, igb->intr_size);
4967 igb->htable = NULL;
4971 * igb_enable_intrs - enable all the ddi interrupts
4973 static int
4974 igb_enable_intrs(igb_t *igb)
4976 int i;
4977 int rc;
4979 /* Enable interrupts */
4980 if (igb->intr_cap & DDI_INTR_FLAG_BLOCK) {
4981 /* Call ddi_intr_block_enable() for MSI */
4982 rc = ddi_intr_block_enable(igb->htable, igb->intr_cnt);
4983 if (rc != DDI_SUCCESS) {
4984 igb_log(igb,
4985 "Enable block intr failed: %d", rc);
4986 return (IGB_FAILURE);
4988 } else {
4989 /* Call ddi_intr_enable() for Legacy/MSI non block enable */
4990 for (i = 0; i < igb->intr_cnt; i++) {
4991 rc = ddi_intr_enable(igb->htable[i]);
4992 if (rc != DDI_SUCCESS) {
4993 igb_log(igb,
4994 "Enable intr failed: %d", rc);
4995 return (IGB_FAILURE);
5000 return (IGB_SUCCESS);
5004 * igb_disable_intrs - disable all the ddi interrupts
5006 static int
5007 igb_disable_intrs(igb_t *igb)
5009 int i;
5010 int rc;
5012 /* Disable all interrupts */
5013 if (igb->intr_cap & DDI_INTR_FLAG_BLOCK) {
5014 rc = ddi_intr_block_disable(igb->htable, igb->intr_cnt);
5015 if (rc != DDI_SUCCESS) {
5016 igb_log(igb,
5017 "Disable block intr failed: %d", rc);
5018 return (IGB_FAILURE);
5020 } else {
5021 for (i = 0; i < igb->intr_cnt; i++) {
5022 rc = ddi_intr_disable(igb->htable[i]);
5023 if (rc != DDI_SUCCESS) {
5024 igb_log(igb,
5025 "Disable intr failed: %d", rc);
5026 return (IGB_FAILURE);
5031 return (IGB_SUCCESS);
5035 * igb_get_phy_state - Get and save the parameters read from PHY registers
5037 static void
5038 igb_get_phy_state(igb_t *igb)
5040 struct e1000_hw *hw = &igb->hw;
5041 uint16_t phy_ctrl;
5042 uint16_t phy_status;
5043 uint16_t phy_an_adv;
5044 uint16_t phy_an_exp;
5045 uint16_t phy_ext_status;
5046 uint16_t phy_1000t_ctrl;
5047 uint16_t phy_1000t_status;
5048 uint16_t phy_lp_able;
5050 ASSERT(mutex_owned(&igb->gen_lock));
5052 if (hw->phy.media_type == e1000_media_type_copper) {
5053 (void) e1000_read_phy_reg(hw, PHY_CONTROL, &phy_ctrl);
5054 (void) e1000_read_phy_reg(hw, PHY_STATUS, &phy_status);
5055 (void) e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &phy_an_adv);
5056 (void) e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_an_exp);
5057 (void) e1000_read_phy_reg(hw, PHY_EXT_STATUS, &phy_ext_status);
5058 (void) e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_1000t_ctrl);
5059 (void) e1000_read_phy_reg(hw,
5060 PHY_1000T_STATUS, &phy_1000t_status);
5061 (void) e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_lp_able);
5063 igb->param_autoneg_cap =
5064 (phy_status & MII_SR_AUTONEG_CAPS) ? 1 : 0;
5065 igb->param_pause_cap =
5066 (phy_an_adv & NWAY_AR_PAUSE) ? 1 : 0;
5067 igb->param_asym_pause_cap =
5068 (phy_an_adv & NWAY_AR_ASM_DIR) ? 1 : 0;
5069 igb->param_1000fdx_cap =
5070 ((phy_ext_status & IEEE_ESR_1000T_FD_CAPS) ||
5071 (phy_ext_status & IEEE_ESR_1000X_FD_CAPS)) ? 1 : 0;
5072 igb->param_1000hdx_cap =
5073 ((phy_ext_status & IEEE_ESR_1000T_HD_CAPS) ||
5074 (phy_ext_status & IEEE_ESR_1000X_HD_CAPS)) ? 1 : 0;
5075 igb->param_100t4_cap =
5076 (phy_status & MII_SR_100T4_CAPS) ? 1 : 0;
5077 igb->param_100fdx_cap = ((phy_status & MII_SR_100X_FD_CAPS) ||
5078 (phy_status & MII_SR_100T2_FD_CAPS)) ? 1 : 0;
5079 igb->param_100hdx_cap = ((phy_status & MII_SR_100X_HD_CAPS) ||
5080 (phy_status & MII_SR_100T2_HD_CAPS)) ? 1 : 0;
5081 igb->param_10fdx_cap =
5082 (phy_status & MII_SR_10T_FD_CAPS) ? 1 : 0;
5083 igb->param_10hdx_cap =
5084 (phy_status & MII_SR_10T_HD_CAPS) ? 1 : 0;
5085 igb->param_rem_fault =
5086 (phy_status & MII_SR_REMOTE_FAULT) ? 1 : 0;
5088 igb->param_adv_autoneg_cap = hw->mac.autoneg;
5089 igb->param_adv_pause_cap =
5090 (phy_an_adv & NWAY_AR_PAUSE) ? 1 : 0;
5091 igb->param_adv_asym_pause_cap =
5092 (phy_an_adv & NWAY_AR_ASM_DIR) ? 1 : 0;
5093 igb->param_adv_1000hdx_cap =
5094 (phy_1000t_ctrl & CR_1000T_HD_CAPS) ? 1 : 0;
5095 igb->param_adv_100t4_cap =
5096 (phy_an_adv & NWAY_AR_100T4_CAPS) ? 1 : 0;
5097 igb->param_adv_rem_fault =
5098 (phy_an_adv & NWAY_AR_REMOTE_FAULT) ? 1 : 0;
5099 if (igb->param_adv_autoneg_cap == 1) {
5100 igb->param_adv_1000fdx_cap =
5101 (phy_1000t_ctrl & CR_1000T_FD_CAPS) ? 1 : 0;
5102 igb->param_adv_100fdx_cap =
5103 (phy_an_adv & NWAY_AR_100TX_FD_CAPS) ? 1 : 0;
5104 igb->param_adv_100hdx_cap =
5105 (phy_an_adv & NWAY_AR_100TX_HD_CAPS) ? 1 : 0;
5106 igb->param_adv_10fdx_cap =
5107 (phy_an_adv & NWAY_AR_10T_FD_CAPS) ? 1 : 0;
5108 igb->param_adv_10hdx_cap =
5109 (phy_an_adv & NWAY_AR_10T_HD_CAPS) ? 1 : 0;
5112 igb->param_lp_autoneg_cap =
5113 (phy_an_exp & NWAY_ER_LP_NWAY_CAPS) ? 1 : 0;
5114 igb->param_lp_pause_cap =
5115 (phy_lp_able & NWAY_LPAR_PAUSE) ? 1 : 0;
5116 igb->param_lp_asym_pause_cap =
5117 (phy_lp_able & NWAY_LPAR_ASM_DIR) ? 1 : 0;
5118 igb->param_lp_1000fdx_cap =
5119 (phy_1000t_status & SR_1000T_LP_FD_CAPS) ? 1 : 0;
5120 igb->param_lp_1000hdx_cap =
5121 (phy_1000t_status & SR_1000T_LP_HD_CAPS) ? 1 : 0;
5122 igb->param_lp_100t4_cap =
5123 (phy_lp_able & NWAY_LPAR_100T4_CAPS) ? 1 : 0;
5124 igb->param_lp_100fdx_cap =
5125 (phy_lp_able & NWAY_LPAR_100TX_FD_CAPS) ? 1 : 0;
5126 igb->param_lp_100hdx_cap =
5127 (phy_lp_able & NWAY_LPAR_100TX_HD_CAPS) ? 1 : 0;
5128 igb->param_lp_10fdx_cap =
5129 (phy_lp_able & NWAY_LPAR_10T_FD_CAPS) ? 1 : 0;
5130 igb->param_lp_10hdx_cap =
5131 (phy_lp_able & NWAY_LPAR_10T_HD_CAPS) ? 1 : 0;
5132 igb->param_lp_rem_fault =
5133 (phy_lp_able & NWAY_LPAR_REMOTE_FAULT) ? 1 : 0;
5134 } else {
5136 * 1Gig Fiber adapter only offers 1Gig Full Duplex.
5138 igb->param_autoneg_cap = 0;
5139 igb->param_pause_cap = 1;
5140 igb->param_asym_pause_cap = 1;
5141 igb->param_1000fdx_cap = 1;
5142 igb->param_1000hdx_cap = 0;
5143 igb->param_100t4_cap = 0;
5144 igb->param_100fdx_cap = 0;
5145 igb->param_100hdx_cap = 0;
5146 igb->param_10fdx_cap = 0;
5147 igb->param_10hdx_cap = 0;
5149 igb->param_adv_autoneg_cap = 0;
5150 igb->param_adv_pause_cap = 1;
5151 igb->param_adv_asym_pause_cap = 1;
5152 igb->param_adv_1000fdx_cap = 1;
5153 igb->param_adv_1000hdx_cap = 0;
5154 igb->param_adv_100t4_cap = 0;
5155 igb->param_adv_100fdx_cap = 0;
5156 igb->param_adv_100hdx_cap = 0;
5157 igb->param_adv_10fdx_cap = 0;
5158 igb->param_adv_10hdx_cap = 0;
5160 igb->param_lp_autoneg_cap = 0;
5161 igb->param_lp_pause_cap = 0;
5162 igb->param_lp_asym_pause_cap = 0;
5163 igb->param_lp_1000fdx_cap = 0;
5164 igb->param_lp_1000hdx_cap = 0;
5165 igb->param_lp_100t4_cap = 0;
5166 igb->param_lp_100fdx_cap = 0;
5167 igb->param_lp_100hdx_cap = 0;
5168 igb->param_lp_10fdx_cap = 0;
5169 igb->param_lp_10hdx_cap = 0;
5170 igb->param_lp_rem_fault = 0;
5175 * synchronize the adv* and en* parameters.
5177 * See comments in <sys/dld.h> for details of the *_en_*
5178 * parameters. The usage of ndd for setting adv parameters will
5179 * synchronize all the en parameters with the e1000g parameters,
5180 * implicitly disabling any settings made via dladm.
5182 static void
5183 igb_param_sync(igb_t *igb)
5185 igb->param_en_1000fdx_cap = igb->param_adv_1000fdx_cap;
5186 igb->param_en_1000hdx_cap = igb->param_adv_1000hdx_cap;
5187 igb->param_en_100t4_cap = igb->param_adv_100t4_cap;
5188 igb->param_en_100fdx_cap = igb->param_adv_100fdx_cap;
5189 igb->param_en_100hdx_cap = igb->param_adv_100hdx_cap;
5190 igb->param_en_10fdx_cap = igb->param_adv_10fdx_cap;
5191 igb->param_en_10hdx_cap = igb->param_adv_10hdx_cap;
5195 * igb_get_driver_control
5197 static void
5198 igb_get_driver_control(struct e1000_hw *hw)
5200 uint32_t ctrl_ext;
5202 /* Notify firmware that driver is in control of device */
5203 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
5204 ctrl_ext |= E1000_CTRL_EXT_DRV_LOAD;
5205 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
5209 * igb_release_driver_control
5211 static void
5212 igb_release_driver_control(struct e1000_hw *hw)
5214 uint32_t ctrl_ext;
5216 /* Notify firmware that driver is no longer in control of device */
5217 ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
5218 ctrl_ext &= ~E1000_CTRL_EXT_DRV_LOAD;
5219 E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
5223 * igb_atomic_reserve - Atomic decrease operation
5226 igb_atomic_reserve(uint32_t *count_p, uint32_t n)
5228 uint32_t oldval;
5229 uint32_t newval;
5231 /* ATOMICALLY */
5232 do {
5233 oldval = *count_p;
5234 if (oldval < n)
5235 return (-1);
5236 newval = oldval - n;
5237 } while (atomic_cas_32(count_p, oldval, newval) != oldval);
5239 return (newval);
5243 * FMA support
5247 igb_check_acc_handle(ddi_acc_handle_t handle)
5249 ddi_fm_error_t de;
5251 ddi_fm_acc_err_get(handle, &de, DDI_FME_VERSION);
5252 ddi_fm_acc_err_clear(handle, DDI_FME_VERSION);
5253 return (de.fme_status);
5257 igb_check_dma_handle(ddi_dma_handle_t handle)
5259 ddi_fm_error_t de;
5261 ddi_fm_dma_err_get(handle, &de, DDI_FME_VERSION);
5262 return (de.fme_status);
5266 * The IO fault service error handling callback function
5268 /*ARGSUSED*/
5269 static int
5270 igb_fm_error_cb(dev_info_t *dip, ddi_fm_error_t *err, const void *impl_data)
5273 * as the driver can always deal with an error in any dma or
5274 * access handle, we can just return the fme_status value.
5276 pci_ereport_post(dip, err, NULL);
5277 return (err->fme_status);
5280 static void
5281 igb_fm_init(igb_t *igb)
5283 ddi_iblock_cookie_t iblk;
5284 int fma_dma_flag;
5286 /* Only register with IO Fault Services if we have some capability */
5287 if (igb->fm_capabilities & DDI_FM_ACCCHK_CAPABLE) {
5288 igb_regs_acc_attr.devacc_attr_access = DDI_FLAGERR_ACC;
5289 } else {
5290 igb_regs_acc_attr.devacc_attr_access = DDI_DEFAULT_ACC;
5293 if (igb->fm_capabilities & DDI_FM_DMACHK_CAPABLE) {
5294 fma_dma_flag = 1;
5295 } else {
5296 fma_dma_flag = 0;
5299 (void) igb_set_fma_flags(fma_dma_flag);
5301 if (igb->fm_capabilities) {
5303 /* Register capabilities with IO Fault Services */
5304 ddi_fm_init(igb->dip, &igb->fm_capabilities, &iblk);
5307 * Initialize pci ereport capabilities if ereport capable
5309 if (DDI_FM_EREPORT_CAP(igb->fm_capabilities) ||
5310 DDI_FM_ERRCB_CAP(igb->fm_capabilities))
5311 pci_ereport_setup(igb->dip);
5314 * Register error callback if error callback capable
5316 if (DDI_FM_ERRCB_CAP(igb->fm_capabilities))
5317 ddi_fm_handler_register(igb->dip,
5318 igb_fm_error_cb, (void*) igb);
5322 static void
5323 igb_fm_fini(igb_t *igb)
5325 /* Only unregister FMA capabilities if we registered some */
5326 if (igb->fm_capabilities) {
5329 * Release any resources allocated by pci_ereport_setup()
5331 if (DDI_FM_EREPORT_CAP(igb->fm_capabilities) ||
5332 DDI_FM_ERRCB_CAP(igb->fm_capabilities))
5333 pci_ereport_teardown(igb->dip);
5336 * Un-register error callback if error callback capable
5338 if (DDI_FM_ERRCB_CAP(igb->fm_capabilities))
5339 ddi_fm_handler_unregister(igb->dip);
5341 /* Unregister from IO Fault Services */
5342 ddi_fm_fini(igb->dip);
5346 void
5347 igb_fm_ereport(igb_t *igb, char *detail)
5349 uint64_t ena;
5350 char buf[FM_MAX_CLASS];
5352 (void) snprintf(buf, FM_MAX_CLASS, "%s.%s", DDI_FM_DEVICE, detail);
5353 ena = fm_ena_generate(0, FM_ENA_FMT1);
5354 if (DDI_FM_EREPORT_CAP(igb->fm_capabilities)) {
5355 ddi_fm_ereport_post(igb->dip, buf, ena, DDI_NOSLEEP,
5356 FM_VERSION, DATA_TYPE_UINT8, FM_EREPORT_VERS0, NULL);