4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
23 * Copyright (c) 2011, 2014 by Delphix. All rights reserved.
26 /* Portions Copyright 2010 Robert Milkowski */
28 #include <sys/zfs_context.h>
34 #include <sys/resource.h>
36 #include <sys/zil_impl.h>
37 #include <sys/dsl_dataset.h>
38 #include <sys/vdev_impl.h>
39 #include <sys/dmu_tx.h>
40 #include <sys/dsl_pool.h>
43 * The zfs intent log (ZIL) saves transaction records of system calls
44 * that change the file system in memory with enough information
45 * to be able to replay them. These are stored in memory until
46 * either the DMU transaction group (txg) commits them to the stable pool
47 * and they can be discarded, or they are flushed to the stable log
48 * (also in the pool) due to a fsync, O_DSYNC or other synchronous
49 * requirement. In the event of a panic or power fail then those log
50 * records (transactions) are replayed.
52 * There is one ZIL per file system. Its on-disk (pool) format consists
59 * A log record holds a system call transaction. Log blocks can
60 * hold many log records and the blocks are chained together.
61 * Each ZIL block contains a block pointer (blkptr_t) to the next
62 * ZIL block in the chain. The ZIL header points to the first
63 * block in the chain. Note there is not a fixed place in the pool
64 * to hold blocks. They are dynamically allocated and freed as
65 * needed from the blocks available. Figure X shows the ZIL structure:
69 * Disable intent logging replay. This global ZIL switch affects all pools.
71 int zil_replay_disable
= 0;
74 * Tunable parameter for debugging or performance analysis. Setting
75 * zfs_nocacheflush will cause corruption on power loss if a volatile
76 * out-of-order write cache is enabled.
78 boolean_t zfs_nocacheflush
= B_FALSE
;
80 static kmem_cache_t
*zil_lwb_cache
;
82 static void zil_async_to_sync(zilog_t
*zilog
, uint64_t foid
);
84 #define LWB_EMPTY(lwb) ((BP_GET_LSIZE(&lwb->lwb_blk) - \
85 sizeof (zil_chain_t)) == (lwb->lwb_sz - lwb->lwb_nused))
89 * ziltest is by and large an ugly hack, but very useful in
90 * checking replay without tedious work.
91 * When running ziltest we want to keep all itx's and so maintain
92 * a single list in the zl_itxg[] that uses a high txg: ZILTEST_TXG
93 * We subtract TXG_CONCURRENT_STATES to allow for common code.
95 #define ZILTEST_TXG (UINT64_MAX - TXG_CONCURRENT_STATES)
98 zil_bp_compare(const void *x1
, const void *x2
)
100 const dva_t
*dva1
= &((zil_bp_node_t
*)x1
)->zn_dva
;
101 const dva_t
*dva2
= &((zil_bp_node_t
*)x2
)->zn_dva
;
103 if (DVA_GET_VDEV(dva1
) < DVA_GET_VDEV(dva2
))
105 if (DVA_GET_VDEV(dva1
) > DVA_GET_VDEV(dva2
))
108 if (DVA_GET_OFFSET(dva1
) < DVA_GET_OFFSET(dva2
))
110 if (DVA_GET_OFFSET(dva1
) > DVA_GET_OFFSET(dva2
))
117 zil_bp_tree_init(zilog_t
*zilog
)
119 avl_create(&zilog
->zl_bp_tree
, zil_bp_compare
,
120 sizeof (zil_bp_node_t
), offsetof(zil_bp_node_t
, zn_node
));
124 zil_bp_tree_fini(zilog_t
*zilog
)
126 avl_tree_t
*t
= &zilog
->zl_bp_tree
;
130 while ((zn
= avl_destroy_nodes(t
, &cookie
)) != NULL
)
131 kmem_free(zn
, sizeof (zil_bp_node_t
));
137 zil_bp_tree_add(zilog_t
*zilog
, const blkptr_t
*bp
)
139 avl_tree_t
*t
= &zilog
->zl_bp_tree
;
144 if (BP_IS_EMBEDDED(bp
))
147 dva
= BP_IDENTITY(bp
);
149 if (avl_find(t
, dva
, &where
) != NULL
)
150 return (SET_ERROR(EEXIST
));
152 zn
= kmem_alloc(sizeof (zil_bp_node_t
), KM_SLEEP
);
154 avl_insert(t
, zn
, where
);
159 static zil_header_t
*
160 zil_header_in_syncing_context(zilog_t
*zilog
)
162 return ((zil_header_t
*)zilog
->zl_header
);
166 zil_init_log_chain(zilog_t
*zilog
, blkptr_t
*bp
)
168 zio_cksum_t
*zc
= &bp
->blk_cksum
;
170 zc
->zc_word
[ZIL_ZC_GUID_0
] = spa_get_random(-1ULL);
171 zc
->zc_word
[ZIL_ZC_GUID_1
] = spa_get_random(-1ULL);
172 zc
->zc_word
[ZIL_ZC_OBJSET
] = dmu_objset_id(zilog
->zl_os
);
173 zc
->zc_word
[ZIL_ZC_SEQ
] = 1ULL;
177 * Read a log block and make sure it's valid.
180 zil_read_log_block(zilog_t
*zilog
, const blkptr_t
*bp
, blkptr_t
*nbp
, void *dst
,
183 enum zio_flag zio_flags
= ZIO_FLAG_CANFAIL
;
184 arc_flags_t aflags
= ARC_FLAG_WAIT
;
185 arc_buf_t
*abuf
= NULL
;
189 if (zilog
->zl_header
->zh_claim_txg
== 0)
190 zio_flags
|= ZIO_FLAG_SPECULATIVE
| ZIO_FLAG_SCRUB
;
192 if (!(zilog
->zl_header
->zh_flags
& ZIL_CLAIM_LR_SEQ_VALID
))
193 zio_flags
|= ZIO_FLAG_SPECULATIVE
;
195 SET_BOOKMARK(&zb
, bp
->blk_cksum
.zc_word
[ZIL_ZC_OBJSET
],
196 ZB_ZIL_OBJECT
, ZB_ZIL_LEVEL
, bp
->blk_cksum
.zc_word
[ZIL_ZC_SEQ
]);
198 error
= arc_read(NULL
, zilog
->zl_spa
, bp
, arc_getbuf_func
, &abuf
,
199 ZIO_PRIORITY_SYNC_READ
, zio_flags
, &aflags
, &zb
);
202 zio_cksum_t cksum
= bp
->blk_cksum
;
205 * Validate the checksummed log block.
207 * Sequence numbers should be... sequential. The checksum
208 * verifier for the next block should be bp's checksum plus 1.
210 * Also check the log chain linkage and size used.
212 cksum
.zc_word
[ZIL_ZC_SEQ
]++;
214 if (BP_GET_CHECKSUM(bp
) == ZIO_CHECKSUM_ZILOG2
) {
215 zil_chain_t
*zilc
= abuf
->b_data
;
216 char *lr
= (char *)(zilc
+ 1);
217 uint64_t len
= zilc
->zc_nused
- sizeof (zil_chain_t
);
219 if (bcmp(&cksum
, &zilc
->zc_next_blk
.blk_cksum
,
220 sizeof (cksum
)) || BP_IS_HOLE(&zilc
->zc_next_blk
)) {
221 error
= SET_ERROR(ECKSUM
);
223 ASSERT3U(len
, <=, SPA_OLD_MAXBLOCKSIZE
);
225 *end
= (char *)dst
+ len
;
226 *nbp
= zilc
->zc_next_blk
;
229 char *lr
= abuf
->b_data
;
230 uint64_t size
= BP_GET_LSIZE(bp
);
231 zil_chain_t
*zilc
= (zil_chain_t
*)(lr
+ size
) - 1;
233 if (bcmp(&cksum
, &zilc
->zc_next_blk
.blk_cksum
,
234 sizeof (cksum
)) || BP_IS_HOLE(&zilc
->zc_next_blk
) ||
235 (zilc
->zc_nused
> (size
- sizeof (*zilc
)))) {
236 error
= SET_ERROR(ECKSUM
);
238 ASSERT3U(zilc
->zc_nused
, <=,
239 SPA_OLD_MAXBLOCKSIZE
);
240 bcopy(lr
, dst
, zilc
->zc_nused
);
241 *end
= (char *)dst
+ zilc
->zc_nused
;
242 *nbp
= zilc
->zc_next_blk
;
246 VERIFY(arc_buf_remove_ref(abuf
, &abuf
));
253 * Read a TX_WRITE log data block.
256 zil_read_log_data(zilog_t
*zilog
, const lr_write_t
*lr
, void *wbuf
)
258 enum zio_flag zio_flags
= ZIO_FLAG_CANFAIL
;
259 const blkptr_t
*bp
= &lr
->lr_blkptr
;
260 arc_flags_t aflags
= ARC_FLAG_WAIT
;
261 arc_buf_t
*abuf
= NULL
;
265 if (BP_IS_HOLE(bp
)) {
267 bzero(wbuf
, MAX(BP_GET_LSIZE(bp
), lr
->lr_length
));
271 if (zilog
->zl_header
->zh_claim_txg
== 0)
272 zio_flags
|= ZIO_FLAG_SPECULATIVE
| ZIO_FLAG_SCRUB
;
274 SET_BOOKMARK(&zb
, dmu_objset_id(zilog
->zl_os
), lr
->lr_foid
,
275 ZB_ZIL_LEVEL
, lr
->lr_offset
/ BP_GET_LSIZE(bp
));
277 error
= arc_read(NULL
, zilog
->zl_spa
, bp
, arc_getbuf_func
, &abuf
,
278 ZIO_PRIORITY_SYNC_READ
, zio_flags
, &aflags
, &zb
);
282 bcopy(abuf
->b_data
, wbuf
, arc_buf_size(abuf
));
283 (void) arc_buf_remove_ref(abuf
, &abuf
);
290 * Parse the intent log, and call parse_func for each valid record within.
293 zil_parse(zilog_t
*zilog
, zil_parse_blk_func_t
*parse_blk_func
,
294 zil_parse_lr_func_t
*parse_lr_func
, void *arg
, uint64_t txg
)
296 const zil_header_t
*zh
= zilog
->zl_header
;
297 boolean_t claimed
= !!zh
->zh_claim_txg
;
298 uint64_t claim_blk_seq
= claimed
? zh
->zh_claim_blk_seq
: UINT64_MAX
;
299 uint64_t claim_lr_seq
= claimed
? zh
->zh_claim_lr_seq
: UINT64_MAX
;
300 uint64_t max_blk_seq
= 0;
301 uint64_t max_lr_seq
= 0;
302 uint64_t blk_count
= 0;
303 uint64_t lr_count
= 0;
304 blkptr_t blk
, next_blk
;
309 * Old logs didn't record the maximum zh_claim_lr_seq.
311 if (!(zh
->zh_flags
& ZIL_CLAIM_LR_SEQ_VALID
))
312 claim_lr_seq
= UINT64_MAX
;
315 * Starting at the block pointed to by zh_log we read the log chain.
316 * For each block in the chain we strongly check that block to
317 * ensure its validity. We stop when an invalid block is found.
318 * For each block pointer in the chain we call parse_blk_func().
319 * For each record in each valid block we call parse_lr_func().
320 * If the log has been claimed, stop if we encounter a sequence
321 * number greater than the highest claimed sequence number.
323 lrbuf
= zio_buf_alloc(SPA_OLD_MAXBLOCKSIZE
);
324 zil_bp_tree_init(zilog
);
326 for (blk
= zh
->zh_log
; !BP_IS_HOLE(&blk
); blk
= next_blk
) {
327 uint64_t blk_seq
= blk
.blk_cksum
.zc_word
[ZIL_ZC_SEQ
];
331 if (blk_seq
> claim_blk_seq
)
333 if ((error
= parse_blk_func(zilog
, &blk
, arg
, txg
)) != 0)
335 ASSERT3U(max_blk_seq
, <, blk_seq
);
336 max_blk_seq
= blk_seq
;
339 if (max_lr_seq
== claim_lr_seq
&& max_blk_seq
== claim_blk_seq
)
342 error
= zil_read_log_block(zilog
, &blk
, &next_blk
, lrbuf
, &end
);
346 for (lrp
= lrbuf
; lrp
< end
; lrp
+= reclen
) {
347 lr_t
*lr
= (lr_t
*)lrp
;
348 reclen
= lr
->lrc_reclen
;
349 ASSERT3U(reclen
, >=, sizeof (lr_t
));
350 if (lr
->lrc_seq
> claim_lr_seq
)
352 if ((error
= parse_lr_func(zilog
, lr
, arg
, txg
)) != 0)
354 ASSERT3U(max_lr_seq
, <, lr
->lrc_seq
);
355 max_lr_seq
= lr
->lrc_seq
;
360 zilog
->zl_parse_error
= error
;
361 zilog
->zl_parse_blk_seq
= max_blk_seq
;
362 zilog
->zl_parse_lr_seq
= max_lr_seq
;
363 zilog
->zl_parse_blk_count
= blk_count
;
364 zilog
->zl_parse_lr_count
= lr_count
;
366 ASSERT(!claimed
|| !(zh
->zh_flags
& ZIL_CLAIM_LR_SEQ_VALID
) ||
367 (max_blk_seq
== claim_blk_seq
&& max_lr_seq
== claim_lr_seq
));
369 zil_bp_tree_fini(zilog
);
370 zio_buf_free(lrbuf
, SPA_OLD_MAXBLOCKSIZE
);
376 zil_claim_log_block(zilog_t
*zilog
, blkptr_t
*bp
, void *tx
, uint64_t first_txg
)
379 * Claim log block if not already committed and not already claimed.
380 * If tx == NULL, just verify that the block is claimable.
382 if (BP_IS_HOLE(bp
) || bp
->blk_birth
< first_txg
||
383 zil_bp_tree_add(zilog
, bp
) != 0)
386 return (zio_wait(zio_claim(NULL
, zilog
->zl_spa
,
387 tx
== NULL
? 0 : first_txg
, bp
, spa_claim_notify
, NULL
,
388 ZIO_FLAG_CANFAIL
| ZIO_FLAG_SPECULATIVE
| ZIO_FLAG_SCRUB
)));
392 zil_claim_log_record(zilog_t
*zilog
, lr_t
*lrc
, void *tx
, uint64_t first_txg
)
394 lr_write_t
*lr
= (lr_write_t
*)lrc
;
397 if (lrc
->lrc_txtype
!= TX_WRITE
)
401 * If the block is not readable, don't claim it. This can happen
402 * in normal operation when a log block is written to disk before
403 * some of the dmu_sync() blocks it points to. In this case, the
404 * transaction cannot have been committed to anyone (we would have
405 * waited for all writes to be stable first), so it is semantically
406 * correct to declare this the end of the log.
408 if (lr
->lr_blkptr
.blk_birth
>= first_txg
&&
409 (error
= zil_read_log_data(zilog
, lr
, NULL
)) != 0)
411 return (zil_claim_log_block(zilog
, &lr
->lr_blkptr
, tx
, first_txg
));
416 zil_free_log_block(zilog_t
*zilog
, blkptr_t
*bp
, void *tx
, uint64_t claim_txg
)
418 zio_free_zil(zilog
->zl_spa
, dmu_tx_get_txg(tx
), bp
);
424 zil_free_log_record(zilog_t
*zilog
, lr_t
*lrc
, void *tx
, uint64_t claim_txg
)
426 lr_write_t
*lr
= (lr_write_t
*)lrc
;
427 blkptr_t
*bp
= &lr
->lr_blkptr
;
430 * If we previously claimed it, we need to free it.
432 if (claim_txg
!= 0 && lrc
->lrc_txtype
== TX_WRITE
&&
433 bp
->blk_birth
>= claim_txg
&& zil_bp_tree_add(zilog
, bp
) == 0 &&
435 zio_free(zilog
->zl_spa
, dmu_tx_get_txg(tx
), bp
);
441 zil_alloc_lwb(zilog_t
*zilog
, blkptr_t
*bp
, uint64_t txg
)
445 lwb
= kmem_cache_alloc(zil_lwb_cache
, KM_SLEEP
);
446 lwb
->lwb_zilog
= zilog
;
448 lwb
->lwb_buf
= zio_buf_alloc(BP_GET_LSIZE(bp
));
449 lwb
->lwb_max_txg
= txg
;
452 if (BP_GET_CHECKSUM(bp
) == ZIO_CHECKSUM_ZILOG2
) {
453 lwb
->lwb_nused
= sizeof (zil_chain_t
);
454 lwb
->lwb_sz
= BP_GET_LSIZE(bp
);
457 lwb
->lwb_sz
= BP_GET_LSIZE(bp
) - sizeof (zil_chain_t
);
460 mutex_enter(&zilog
->zl_lock
);
461 list_insert_tail(&zilog
->zl_lwb_list
, lwb
);
462 mutex_exit(&zilog
->zl_lock
);
468 * Called when we create in-memory log transactions so that we know
469 * to cleanup the itxs at the end of spa_sync().
472 zilog_dirty(zilog_t
*zilog
, uint64_t txg
)
474 dsl_pool_t
*dp
= zilog
->zl_dmu_pool
;
475 dsl_dataset_t
*ds
= dmu_objset_ds(zilog
->zl_os
);
477 if (ds
->ds_is_snapshot
)
478 panic("dirtying snapshot!");
480 if (txg_list_add(&dp
->dp_dirty_zilogs
, zilog
, txg
)) {
481 /* up the hold count until we can be written out */
482 dmu_buf_add_ref(ds
->ds_dbuf
, zilog
);
487 zilog_is_dirty(zilog_t
*zilog
)
489 dsl_pool_t
*dp
= zilog
->zl_dmu_pool
;
491 for (int t
= 0; t
< TXG_SIZE
; t
++) {
492 if (txg_list_member(&dp
->dp_dirty_zilogs
, zilog
, t
))
499 * Create an on-disk intent log.
502 zil_create(zilog_t
*zilog
)
504 const zil_header_t
*zh
= zilog
->zl_header
;
512 * Wait for any previous destroy to complete.
514 txg_wait_synced(zilog
->zl_dmu_pool
, zilog
->zl_destroy_txg
);
516 ASSERT(zh
->zh_claim_txg
== 0);
517 ASSERT(zh
->zh_replay_seq
== 0);
522 * Allocate an initial log block if:
523 * - there isn't one already
524 * - the existing block is the wrong endianess
526 if (BP_IS_HOLE(&blk
) || BP_SHOULD_BYTESWAP(&blk
)) {
527 tx
= dmu_tx_create(zilog
->zl_os
);
528 VERIFY(dmu_tx_assign(tx
, TXG_WAIT
) == 0);
529 dsl_dataset_dirty(dmu_objset_ds(zilog
->zl_os
), tx
);
530 txg
= dmu_tx_get_txg(tx
);
532 if (!BP_IS_HOLE(&blk
)) {
533 zio_free_zil(zilog
->zl_spa
, txg
, &blk
);
537 error
= zio_alloc_zil(zilog
->zl_spa
, txg
, &blk
, NULL
,
538 ZIL_MIN_BLKSZ
, zilog
->zl_logbias
== ZFS_LOGBIAS_LATENCY
);
541 zil_init_log_chain(zilog
, &blk
);
545 * Allocate a log write buffer (lwb) for the first log block.
548 lwb
= zil_alloc_lwb(zilog
, &blk
, txg
);
551 * If we just allocated the first log block, commit our transaction
552 * and wait for zil_sync() to stuff the block poiner into zh_log.
553 * (zh is part of the MOS, so we cannot modify it in open context.)
557 txg_wait_synced(zilog
->zl_dmu_pool
, txg
);
560 ASSERT(bcmp(&blk
, &zh
->zh_log
, sizeof (blk
)) == 0);
566 * In one tx, free all log blocks and clear the log header.
567 * If keep_first is set, then we're replaying a log with no content.
568 * We want to keep the first block, however, so that the first
569 * synchronous transaction doesn't require a txg_wait_synced()
570 * in zil_create(). We don't need to txg_wait_synced() here either
571 * when keep_first is set, because both zil_create() and zil_destroy()
572 * will wait for any in-progress destroys to complete.
575 zil_destroy(zilog_t
*zilog
, boolean_t keep_first
)
577 const zil_header_t
*zh
= zilog
->zl_header
;
583 * Wait for any previous destroy to complete.
585 txg_wait_synced(zilog
->zl_dmu_pool
, zilog
->zl_destroy_txg
);
587 zilog
->zl_old_header
= *zh
; /* debugging aid */
589 if (BP_IS_HOLE(&zh
->zh_log
))
592 tx
= dmu_tx_create(zilog
->zl_os
);
593 VERIFY(dmu_tx_assign(tx
, TXG_WAIT
) == 0);
594 dsl_dataset_dirty(dmu_objset_ds(zilog
->zl_os
), tx
);
595 txg
= dmu_tx_get_txg(tx
);
597 mutex_enter(&zilog
->zl_lock
);
599 ASSERT3U(zilog
->zl_destroy_txg
, <, txg
);
600 zilog
->zl_destroy_txg
= txg
;
601 zilog
->zl_keep_first
= keep_first
;
603 if (!list_is_empty(&zilog
->zl_lwb_list
)) {
604 ASSERT(zh
->zh_claim_txg
== 0);
606 while ((lwb
= list_head(&zilog
->zl_lwb_list
)) != NULL
) {
607 list_remove(&zilog
->zl_lwb_list
, lwb
);
608 if (lwb
->lwb_buf
!= NULL
)
609 zio_buf_free(lwb
->lwb_buf
, lwb
->lwb_sz
);
610 zio_free_zil(zilog
->zl_spa
, txg
, &lwb
->lwb_blk
);
611 kmem_cache_free(zil_lwb_cache
, lwb
);
613 } else if (!keep_first
) {
614 zil_destroy_sync(zilog
, tx
);
616 mutex_exit(&zilog
->zl_lock
);
622 zil_destroy_sync(zilog_t
*zilog
, dmu_tx_t
*tx
)
624 ASSERT(list_is_empty(&zilog
->zl_lwb_list
));
625 (void) zil_parse(zilog
, zil_free_log_block
,
626 zil_free_log_record
, tx
, zilog
->zl_header
->zh_claim_txg
);
630 zil_claim(const char *osname
, void *txarg
)
632 dmu_tx_t
*tx
= txarg
;
633 uint64_t first_txg
= dmu_tx_get_txg(tx
);
639 error
= dmu_objset_own(osname
, DMU_OST_ANY
, B_FALSE
, FTAG
, &os
);
642 * EBUSY indicates that the objset is inconsistent, in which
643 * case it can not have a ZIL.
645 if (error
!= EBUSY
) {
646 cmn_err(CE_WARN
, "can't open objset for %s, error %u",
652 zilog
= dmu_objset_zil(os
);
653 zh
= zil_header_in_syncing_context(zilog
);
655 if (spa_get_log_state(zilog
->zl_spa
) == SPA_LOG_CLEAR
) {
656 if (!BP_IS_HOLE(&zh
->zh_log
))
657 zio_free_zil(zilog
->zl_spa
, first_txg
, &zh
->zh_log
);
658 BP_ZERO(&zh
->zh_log
);
659 dsl_dataset_dirty(dmu_objset_ds(os
), tx
);
660 dmu_objset_disown(os
, FTAG
);
665 * Claim all log blocks if we haven't already done so, and remember
666 * the highest claimed sequence number. This ensures that if we can
667 * read only part of the log now (e.g. due to a missing device),
668 * but we can read the entire log later, we will not try to replay
669 * or destroy beyond the last block we successfully claimed.
671 ASSERT3U(zh
->zh_claim_txg
, <=, first_txg
);
672 if (zh
->zh_claim_txg
== 0 && !BP_IS_HOLE(&zh
->zh_log
)) {
673 (void) zil_parse(zilog
, zil_claim_log_block
,
674 zil_claim_log_record
, tx
, first_txg
);
675 zh
->zh_claim_txg
= first_txg
;
676 zh
->zh_claim_blk_seq
= zilog
->zl_parse_blk_seq
;
677 zh
->zh_claim_lr_seq
= zilog
->zl_parse_lr_seq
;
678 if (zilog
->zl_parse_lr_count
|| zilog
->zl_parse_blk_count
> 1)
679 zh
->zh_flags
|= ZIL_REPLAY_NEEDED
;
680 zh
->zh_flags
|= ZIL_CLAIM_LR_SEQ_VALID
;
681 dsl_dataset_dirty(dmu_objset_ds(os
), tx
);
684 ASSERT3U(first_txg
, ==, (spa_last_synced_txg(zilog
->zl_spa
) + 1));
685 dmu_objset_disown(os
, FTAG
);
690 * Check the log by walking the log chain.
691 * Checksum errors are ok as they indicate the end of the chain.
692 * Any other error (no device or read failure) returns an error.
695 zil_check_log_chain(const char *osname
, void *tx
)
704 error
= dmu_objset_hold(osname
, FTAG
, &os
);
706 cmn_err(CE_WARN
, "can't open objset for %s", osname
);
710 zilog
= dmu_objset_zil(os
);
711 bp
= (blkptr_t
*)&zilog
->zl_header
->zh_log
;
714 * Check the first block and determine if it's on a log device
715 * which may have been removed or faulted prior to loading this
716 * pool. If so, there's no point in checking the rest of the log
717 * as its content should have already been synced to the pool.
719 if (!BP_IS_HOLE(bp
)) {
721 boolean_t valid
= B_TRUE
;
723 spa_config_enter(os
->os_spa
, SCL_STATE
, FTAG
, RW_READER
);
724 vd
= vdev_lookup_top(os
->os_spa
, DVA_GET_VDEV(&bp
->blk_dva
[0]));
725 if (vd
->vdev_islog
&& vdev_is_dead(vd
))
726 valid
= vdev_log_state_valid(vd
);
727 spa_config_exit(os
->os_spa
, SCL_STATE
, FTAG
);
730 dmu_objset_rele(os
, FTAG
);
736 * Because tx == NULL, zil_claim_log_block() will not actually claim
737 * any blocks, but just determine whether it is possible to do so.
738 * In addition to checking the log chain, zil_claim_log_block()
739 * will invoke zio_claim() with a done func of spa_claim_notify(),
740 * which will update spa_max_claim_txg. See spa_load() for details.
742 error
= zil_parse(zilog
, zil_claim_log_block
, zil_claim_log_record
, tx
,
743 zilog
->zl_header
->zh_claim_txg
? -1ULL : spa_first_txg(os
->os_spa
));
745 dmu_objset_rele(os
, FTAG
);
747 return ((error
== ECKSUM
|| error
== ENOENT
) ? 0 : error
);
751 zil_vdev_compare(const void *x1
, const void *x2
)
753 const uint64_t v1
= ((zil_vdev_node_t
*)x1
)->zv_vdev
;
754 const uint64_t v2
= ((zil_vdev_node_t
*)x2
)->zv_vdev
;
765 zil_add_block(zilog_t
*zilog
, const blkptr_t
*bp
)
767 avl_tree_t
*t
= &zilog
->zl_vdev_tree
;
769 zil_vdev_node_t
*zv
, zvsearch
;
770 int ndvas
= BP_GET_NDVAS(bp
);
773 if (zfs_nocacheflush
)
776 ASSERT(zilog
->zl_writer
);
779 * Even though we're zl_writer, we still need a lock because the
780 * zl_get_data() callbacks may have dmu_sync() done callbacks
781 * that will run concurrently.
783 mutex_enter(&zilog
->zl_vdev_lock
);
784 for (i
= 0; i
< ndvas
; i
++) {
785 zvsearch
.zv_vdev
= DVA_GET_VDEV(&bp
->blk_dva
[i
]);
786 if (avl_find(t
, &zvsearch
, &where
) == NULL
) {
787 zv
= kmem_alloc(sizeof (*zv
), KM_SLEEP
);
788 zv
->zv_vdev
= zvsearch
.zv_vdev
;
789 avl_insert(t
, zv
, where
);
792 mutex_exit(&zilog
->zl_vdev_lock
);
796 zil_flush_vdevs(zilog_t
*zilog
)
798 spa_t
*spa
= zilog
->zl_spa
;
799 avl_tree_t
*t
= &zilog
->zl_vdev_tree
;
804 ASSERT(zilog
->zl_writer
);
807 * We don't need zl_vdev_lock here because we're the zl_writer,
808 * and all zl_get_data() callbacks are done.
810 if (avl_numnodes(t
) == 0)
813 spa_config_enter(spa
, SCL_STATE
, FTAG
, RW_READER
);
815 zio
= zio_root(spa
, NULL
, NULL
, ZIO_FLAG_CANFAIL
);
817 while ((zv
= avl_destroy_nodes(t
, &cookie
)) != NULL
) {
818 vdev_t
*vd
= vdev_lookup_top(spa
, zv
->zv_vdev
);
821 kmem_free(zv
, sizeof (*zv
));
825 * Wait for all the flushes to complete. Not all devices actually
826 * support the DKIOCFLUSHWRITECACHE ioctl, so it's OK if it fails.
828 (void) zio_wait(zio
);
830 spa_config_exit(spa
, SCL_STATE
, FTAG
);
834 * Function called when a log block write completes
837 zil_lwb_write_done(zio_t
*zio
)
839 lwb_t
*lwb
= zio
->io_private
;
840 zilog_t
*zilog
= lwb
->lwb_zilog
;
841 dmu_tx_t
*tx
= lwb
->lwb_tx
;
843 ASSERT(BP_GET_COMPRESS(zio
->io_bp
) == ZIO_COMPRESS_OFF
);
844 ASSERT(BP_GET_TYPE(zio
->io_bp
) == DMU_OT_INTENT_LOG
);
845 ASSERT(BP_GET_LEVEL(zio
->io_bp
) == 0);
846 ASSERT(BP_GET_BYTEORDER(zio
->io_bp
) == ZFS_HOST_BYTEORDER
);
847 ASSERT(!BP_IS_GANG(zio
->io_bp
));
848 ASSERT(!BP_IS_HOLE(zio
->io_bp
));
849 ASSERT(BP_GET_FILL(zio
->io_bp
) == 0);
852 * Ensure the lwb buffer pointer is cleared before releasing
853 * the txg. If we have had an allocation failure and
854 * the txg is waiting to sync then we want want zil_sync()
855 * to remove the lwb so that it's not picked up as the next new
856 * one in zil_commit_writer(). zil_sync() will only remove
857 * the lwb if lwb_buf is null.
859 zio_buf_free(lwb
->lwb_buf
, lwb
->lwb_sz
);
860 mutex_enter(&zilog
->zl_lock
);
863 mutex_exit(&zilog
->zl_lock
);
866 * Now that we've written this log block, we have a stable pointer
867 * to the next block in the chain, so it's OK to let the txg in
868 * which we allocated the next block sync.
874 * Initialize the io for a log block.
877 zil_lwb_write_init(zilog_t
*zilog
, lwb_t
*lwb
)
881 SET_BOOKMARK(&zb
, lwb
->lwb_blk
.blk_cksum
.zc_word
[ZIL_ZC_OBJSET
],
882 ZB_ZIL_OBJECT
, ZB_ZIL_LEVEL
,
883 lwb
->lwb_blk
.blk_cksum
.zc_word
[ZIL_ZC_SEQ
]);
885 if (zilog
->zl_root_zio
== NULL
) {
886 zilog
->zl_root_zio
= zio_root(zilog
->zl_spa
, NULL
, NULL
,
889 if (lwb
->lwb_zio
== NULL
) {
890 lwb
->lwb_zio
= zio_rewrite(zilog
->zl_root_zio
, zilog
->zl_spa
,
891 0, &lwb
->lwb_blk
, lwb
->lwb_buf
, BP_GET_LSIZE(&lwb
->lwb_blk
),
892 zil_lwb_write_done
, lwb
, ZIO_PRIORITY_SYNC_WRITE
,
893 ZIO_FLAG_CANFAIL
| ZIO_FLAG_DONT_PROPAGATE
, &zb
);
898 * Define a limited set of intent log block sizes.
900 * These must be a multiple of 4KB. Note only the amount used (again
901 * aligned to 4KB) actually gets written. However, we can't always just
902 * allocate SPA_OLD_MAXBLOCKSIZE as the slog space could be exhausted.
904 uint64_t zil_block_buckets
[] = {
905 4096, /* non TX_WRITE */
906 8192+4096, /* data base */
907 32*1024 + 4096, /* NFS writes */
912 * Use the slog as long as the logbias is 'latency' and the current commit size
913 * is less than the limit or the total list size is less than 2X the limit.
914 * Limit checking is disabled by setting zil_slog_limit to UINT64_MAX.
916 uint64_t zil_slog_limit
= 1024 * 1024;
917 #define USE_SLOG(zilog) (((zilog)->zl_logbias == ZFS_LOGBIAS_LATENCY) && \
918 (((zilog)->zl_cur_used < zil_slog_limit) || \
919 ((zilog)->zl_itx_list_sz < (zil_slog_limit << 1))))
922 * Start a log block write and advance to the next log block.
923 * Calls are serialized.
926 zil_lwb_write_start(zilog_t
*zilog
, lwb_t
*lwb
)
930 spa_t
*spa
= zilog
->zl_spa
;
934 uint64_t zil_blksz
, wsz
;
937 if (BP_GET_CHECKSUM(&lwb
->lwb_blk
) == ZIO_CHECKSUM_ZILOG2
) {
938 zilc
= (zil_chain_t
*)lwb
->lwb_buf
;
939 bp
= &zilc
->zc_next_blk
;
941 zilc
= (zil_chain_t
*)(lwb
->lwb_buf
+ lwb
->lwb_sz
);
942 bp
= &zilc
->zc_next_blk
;
945 ASSERT(lwb
->lwb_nused
<= lwb
->lwb_sz
);
948 * Allocate the next block and save its address in this block
949 * before writing it in order to establish the log chain.
950 * Note that if the allocation of nlwb synced before we wrote
951 * the block that points at it (lwb), we'd leak it if we crashed.
952 * Therefore, we don't do dmu_tx_commit() until zil_lwb_write_done().
953 * We dirty the dataset to ensure that zil_sync() will be called
954 * to clean up in the event of allocation failure or I/O failure.
956 tx
= dmu_tx_create(zilog
->zl_os
);
957 VERIFY(dmu_tx_assign(tx
, TXG_WAIT
) == 0);
958 dsl_dataset_dirty(dmu_objset_ds(zilog
->zl_os
), tx
);
959 txg
= dmu_tx_get_txg(tx
);
964 * Log blocks are pre-allocated. Here we select the size of the next
965 * block, based on size used in the last block.
966 * - first find the smallest bucket that will fit the block from a
967 * limited set of block sizes. This is because it's faster to write
968 * blocks allocated from the same metaslab as they are adjacent or
970 * - next find the maximum from the new suggested size and an array of
971 * previous sizes. This lessens a picket fence effect of wrongly
972 * guesssing the size if we have a stream of say 2k, 64k, 2k, 64k
975 * Note we only write what is used, but we can't just allocate
976 * the maximum block size because we can exhaust the available
979 zil_blksz
= zilog
->zl_cur_used
+ sizeof (zil_chain_t
);
980 for (i
= 0; zil_blksz
> zil_block_buckets
[i
]; i
++)
982 zil_blksz
= zil_block_buckets
[i
];
983 if (zil_blksz
== UINT64_MAX
)
984 zil_blksz
= SPA_OLD_MAXBLOCKSIZE
;
985 zilog
->zl_prev_blks
[zilog
->zl_prev_rotor
] = zil_blksz
;
986 for (i
= 0; i
< ZIL_PREV_BLKS
; i
++)
987 zil_blksz
= MAX(zil_blksz
, zilog
->zl_prev_blks
[i
]);
988 zilog
->zl_prev_rotor
= (zilog
->zl_prev_rotor
+ 1) & (ZIL_PREV_BLKS
- 1);
991 /* pass the old blkptr in order to spread log blocks across devs */
992 error
= zio_alloc_zil(spa
, txg
, bp
, &lwb
->lwb_blk
, zil_blksz
,
995 ASSERT3U(bp
->blk_birth
, ==, txg
);
996 bp
->blk_cksum
= lwb
->lwb_blk
.blk_cksum
;
997 bp
->blk_cksum
.zc_word
[ZIL_ZC_SEQ
]++;
1000 * Allocate a new log write buffer (lwb).
1002 nlwb
= zil_alloc_lwb(zilog
, bp
, txg
);
1004 /* Record the block for later vdev flushing */
1005 zil_add_block(zilog
, &lwb
->lwb_blk
);
1008 if (BP_GET_CHECKSUM(&lwb
->lwb_blk
) == ZIO_CHECKSUM_ZILOG2
) {
1009 /* For Slim ZIL only write what is used. */
1010 wsz
= P2ROUNDUP_TYPED(lwb
->lwb_nused
, ZIL_MIN_BLKSZ
, uint64_t);
1011 ASSERT3U(wsz
, <=, lwb
->lwb_sz
);
1012 zio_shrink(lwb
->lwb_zio
, wsz
);
1019 zilc
->zc_nused
= lwb
->lwb_nused
;
1020 zilc
->zc_eck
.zec_cksum
= lwb
->lwb_blk
.blk_cksum
;
1023 * clear unused data for security
1025 bzero(lwb
->lwb_buf
+ lwb
->lwb_nused
, wsz
- lwb
->lwb_nused
);
1027 zio_nowait(lwb
->lwb_zio
); /* Kick off the write for the old log block */
1030 * If there was an allocation failure then nlwb will be null which
1031 * forces a txg_wait_synced().
1037 zil_lwb_commit(zilog_t
*zilog
, itx_t
*itx
, lwb_t
*lwb
)
1039 lr_t
*lrc
= &itx
->itx_lr
; /* common log record */
1040 lr_write_t
*lrw
= (lr_write_t
*)lrc
;
1042 uint64_t txg
= lrc
->lrc_txg
;
1043 uint64_t reclen
= lrc
->lrc_reclen
;
1049 ASSERT(lwb
->lwb_buf
!= NULL
);
1050 ASSERT(zilog_is_dirty(zilog
) ||
1051 spa_freeze_txg(zilog
->zl_spa
) != UINT64_MAX
);
1053 if (lrc
->lrc_txtype
== TX_WRITE
&& itx
->itx_wr_state
== WR_NEED_COPY
)
1054 dlen
= P2ROUNDUP_TYPED(
1055 lrw
->lr_length
, sizeof (uint64_t), uint64_t);
1057 zilog
->zl_cur_used
+= (reclen
+ dlen
);
1059 zil_lwb_write_init(zilog
, lwb
);
1062 * If this record won't fit in the current log block, start a new one.
1064 if (lwb
->lwb_nused
+ reclen
+ dlen
> lwb
->lwb_sz
) {
1065 lwb
= zil_lwb_write_start(zilog
, lwb
);
1068 zil_lwb_write_init(zilog
, lwb
);
1069 ASSERT(LWB_EMPTY(lwb
));
1070 if (lwb
->lwb_nused
+ reclen
+ dlen
> lwb
->lwb_sz
) {
1071 txg_wait_synced(zilog
->zl_dmu_pool
, txg
);
1076 lr_buf
= lwb
->lwb_buf
+ lwb
->lwb_nused
;
1077 bcopy(lrc
, lr_buf
, reclen
);
1078 lrc
= (lr_t
*)lr_buf
;
1079 lrw
= (lr_write_t
*)lrc
;
1082 * If it's a write, fetch the data or get its blkptr as appropriate.
1084 if (lrc
->lrc_txtype
== TX_WRITE
) {
1085 if (txg
> spa_freeze_txg(zilog
->zl_spa
))
1086 txg_wait_synced(zilog
->zl_dmu_pool
, txg
);
1087 if (itx
->itx_wr_state
!= WR_COPIED
) {
1092 ASSERT(itx
->itx_wr_state
== WR_NEED_COPY
);
1093 dbuf
= lr_buf
+ reclen
;
1094 lrw
->lr_common
.lrc_reclen
+= dlen
;
1096 ASSERT(itx
->itx_wr_state
== WR_INDIRECT
);
1099 error
= zilog
->zl_get_data(
1100 itx
->itx_private
, lrw
, dbuf
, lwb
->lwb_zio
);
1102 txg_wait_synced(zilog
->zl_dmu_pool
, txg
);
1106 ASSERT(error
== ENOENT
|| error
== EEXIST
||
1114 * We're actually making an entry, so update lrc_seq to be the
1115 * log record sequence number. Note that this is generally not
1116 * equal to the itx sequence number because not all transactions
1117 * are synchronous, and sometimes spa_sync() gets there first.
1119 lrc
->lrc_seq
= ++zilog
->zl_lr_seq
; /* we are single threaded */
1120 lwb
->lwb_nused
+= reclen
+ dlen
;
1121 lwb
->lwb_max_txg
= MAX(lwb
->lwb_max_txg
, txg
);
1122 ASSERT3U(lwb
->lwb_nused
, <=, lwb
->lwb_sz
);
1123 ASSERT0(P2PHASE(lwb
->lwb_nused
, sizeof (uint64_t)));
1129 zil_itx_create(uint64_t txtype
, size_t lrsize
)
1133 lrsize
= P2ROUNDUP_TYPED(lrsize
, sizeof (uint64_t), size_t);
1135 itx
= kmem_alloc(offsetof(itx_t
, itx_lr
) + lrsize
, KM_SLEEP
);
1136 itx
->itx_lr
.lrc_txtype
= txtype
;
1137 itx
->itx_lr
.lrc_reclen
= lrsize
;
1138 itx
->itx_sod
= lrsize
; /* if write & WR_NEED_COPY will be increased */
1139 itx
->itx_lr
.lrc_seq
= 0; /* defensive */
1140 itx
->itx_sync
= B_TRUE
; /* default is synchronous */
1146 zil_itx_destroy(itx_t
*itx
)
1148 kmem_free(itx
, offsetof(itx_t
, itx_lr
) + itx
->itx_lr
.lrc_reclen
);
1152 * Free up the sync and async itxs. The itxs_t has already been detached
1153 * so no locks are needed.
1156 zil_itxg_clean(itxs_t
*itxs
)
1162 itx_async_node_t
*ian
;
1164 list
= &itxs
->i_sync_list
;
1165 while ((itx
= list_head(list
)) != NULL
) {
1166 list_remove(list
, itx
);
1167 kmem_free(itx
, offsetof(itx_t
, itx_lr
) +
1168 itx
->itx_lr
.lrc_reclen
);
1172 t
= &itxs
->i_async_tree
;
1173 while ((ian
= avl_destroy_nodes(t
, &cookie
)) != NULL
) {
1174 list
= &ian
->ia_list
;
1175 while ((itx
= list_head(list
)) != NULL
) {
1176 list_remove(list
, itx
);
1177 kmem_free(itx
, offsetof(itx_t
, itx_lr
) +
1178 itx
->itx_lr
.lrc_reclen
);
1181 kmem_free(ian
, sizeof (itx_async_node_t
));
1185 kmem_free(itxs
, sizeof (itxs_t
));
1189 zil_aitx_compare(const void *x1
, const void *x2
)
1191 const uint64_t o1
= ((itx_async_node_t
*)x1
)->ia_foid
;
1192 const uint64_t o2
= ((itx_async_node_t
*)x2
)->ia_foid
;
1203 * Remove all async itx with the given oid.
1206 zil_remove_async(zilog_t
*zilog
, uint64_t oid
)
1209 itx_async_node_t
*ian
;
1216 list_create(&clean_list
, sizeof (itx_t
), offsetof(itx_t
, itx_node
));
1218 if (spa_freeze_txg(zilog
->zl_spa
) != UINT64_MAX
) /* ziltest support */
1221 otxg
= spa_last_synced_txg(zilog
->zl_spa
) + 1;
1223 for (txg
= otxg
; txg
< (otxg
+ TXG_CONCURRENT_STATES
); txg
++) {
1224 itxg_t
*itxg
= &zilog
->zl_itxg
[txg
& TXG_MASK
];
1226 mutex_enter(&itxg
->itxg_lock
);
1227 if (itxg
->itxg_txg
!= txg
) {
1228 mutex_exit(&itxg
->itxg_lock
);
1233 * Locate the object node and append its list.
1235 t
= &itxg
->itxg_itxs
->i_async_tree
;
1236 ian
= avl_find(t
, &oid
, &where
);
1238 list_move_tail(&clean_list
, &ian
->ia_list
);
1239 mutex_exit(&itxg
->itxg_lock
);
1241 while ((itx
= list_head(&clean_list
)) != NULL
) {
1242 list_remove(&clean_list
, itx
);
1243 kmem_free(itx
, offsetof(itx_t
, itx_lr
) +
1244 itx
->itx_lr
.lrc_reclen
);
1246 list_destroy(&clean_list
);
1250 zil_itx_assign(zilog_t
*zilog
, itx_t
*itx
, dmu_tx_t
*tx
)
1254 itxs_t
*itxs
, *clean
= NULL
;
1257 * Object ids can be re-instantiated in the next txg so
1258 * remove any async transactions to avoid future leaks.
1259 * This can happen if a fsync occurs on the re-instantiated
1260 * object for a WR_INDIRECT or WR_NEED_COPY write, which gets
1261 * the new file data and flushes a write record for the old object.
1263 if ((itx
->itx_lr
.lrc_txtype
& ~TX_CI
) == TX_REMOVE
)
1264 zil_remove_async(zilog
, itx
->itx_oid
);
1267 * Ensure the data of a renamed file is committed before the rename.
1269 if ((itx
->itx_lr
.lrc_txtype
& ~TX_CI
) == TX_RENAME
)
1270 zil_async_to_sync(zilog
, itx
->itx_oid
);
1272 if (spa_freeze_txg(zilog
->zl_spa
) != UINT64_MAX
)
1275 txg
= dmu_tx_get_txg(tx
);
1277 itxg
= &zilog
->zl_itxg
[txg
& TXG_MASK
];
1278 mutex_enter(&itxg
->itxg_lock
);
1279 itxs
= itxg
->itxg_itxs
;
1280 if (itxg
->itxg_txg
!= txg
) {
1283 * The zil_clean callback hasn't got around to cleaning
1284 * this itxg. Save the itxs for release below.
1285 * This should be rare.
1287 atomic_add_64(&zilog
->zl_itx_list_sz
, -itxg
->itxg_sod
);
1289 clean
= itxg
->itxg_itxs
;
1291 ASSERT(itxg
->itxg_sod
== 0);
1292 itxg
->itxg_txg
= txg
;
1293 itxs
= itxg
->itxg_itxs
= kmem_zalloc(sizeof (itxs_t
), KM_SLEEP
);
1295 list_create(&itxs
->i_sync_list
, sizeof (itx_t
),
1296 offsetof(itx_t
, itx_node
));
1297 avl_create(&itxs
->i_async_tree
, zil_aitx_compare
,
1298 sizeof (itx_async_node_t
),
1299 offsetof(itx_async_node_t
, ia_node
));
1301 if (itx
->itx_sync
) {
1302 list_insert_tail(&itxs
->i_sync_list
, itx
);
1303 atomic_add_64(&zilog
->zl_itx_list_sz
, itx
->itx_sod
);
1304 itxg
->itxg_sod
+= itx
->itx_sod
;
1306 avl_tree_t
*t
= &itxs
->i_async_tree
;
1307 uint64_t foid
= ((lr_ooo_t
*)&itx
->itx_lr
)->lr_foid
;
1308 itx_async_node_t
*ian
;
1311 ian
= avl_find(t
, &foid
, &where
);
1313 ian
= kmem_alloc(sizeof (itx_async_node_t
), KM_SLEEP
);
1314 list_create(&ian
->ia_list
, sizeof (itx_t
),
1315 offsetof(itx_t
, itx_node
));
1316 ian
->ia_foid
= foid
;
1317 avl_insert(t
, ian
, where
);
1319 list_insert_tail(&ian
->ia_list
, itx
);
1322 itx
->itx_lr
.lrc_txg
= dmu_tx_get_txg(tx
);
1323 zilog_dirty(zilog
, txg
);
1324 mutex_exit(&itxg
->itxg_lock
);
1326 /* Release the old itxs now we've dropped the lock */
1328 zil_itxg_clean(clean
);
1332 * If there are any in-memory intent log transactions which have now been
1333 * synced then start up a taskq to free them. We should only do this after we
1334 * have written out the uberblocks (i.e. txg has been comitted) so that
1335 * don't inadvertently clean out in-memory log records that would be required
1339 zil_clean(zilog_t
*zilog
, uint64_t synced_txg
)
1341 itxg_t
*itxg
= &zilog
->zl_itxg
[synced_txg
& TXG_MASK
];
1344 mutex_enter(&itxg
->itxg_lock
);
1345 if (itxg
->itxg_itxs
== NULL
|| itxg
->itxg_txg
== ZILTEST_TXG
) {
1346 mutex_exit(&itxg
->itxg_lock
);
1349 ASSERT3U(itxg
->itxg_txg
, <=, synced_txg
);
1350 ASSERT(itxg
->itxg_txg
!= 0);
1351 ASSERT(zilog
->zl_clean_taskq
!= NULL
);
1352 atomic_add_64(&zilog
->zl_itx_list_sz
, -itxg
->itxg_sod
);
1354 clean_me
= itxg
->itxg_itxs
;
1355 itxg
->itxg_itxs
= NULL
;
1357 mutex_exit(&itxg
->itxg_lock
);
1359 * Preferably start a task queue to free up the old itxs but
1360 * if taskq_dispatch can't allocate resources to do that then
1361 * free it in-line. This should be rare. Note, using TQ_SLEEP
1362 * created a bad performance problem.
1364 if (taskq_dispatch(zilog
->zl_clean_taskq
,
1365 (void (*)(void *))zil_itxg_clean
, clean_me
, TQ_NOSLEEP
) == NULL
)
1366 zil_itxg_clean(clean_me
);
1370 * Get the list of itxs to commit into zl_itx_commit_list.
1373 zil_get_commit_list(zilog_t
*zilog
)
1376 list_t
*commit_list
= &zilog
->zl_itx_commit_list
;
1377 uint64_t push_sod
= 0;
1379 if (spa_freeze_txg(zilog
->zl_spa
) != UINT64_MAX
) /* ziltest support */
1382 otxg
= spa_last_synced_txg(zilog
->zl_spa
) + 1;
1384 for (txg
= otxg
; txg
< (otxg
+ TXG_CONCURRENT_STATES
); txg
++) {
1385 itxg_t
*itxg
= &zilog
->zl_itxg
[txg
& TXG_MASK
];
1387 mutex_enter(&itxg
->itxg_lock
);
1388 if (itxg
->itxg_txg
!= txg
) {
1389 mutex_exit(&itxg
->itxg_lock
);
1393 list_move_tail(commit_list
, &itxg
->itxg_itxs
->i_sync_list
);
1394 push_sod
+= itxg
->itxg_sod
;
1397 mutex_exit(&itxg
->itxg_lock
);
1399 atomic_add_64(&zilog
->zl_itx_list_sz
, -push_sod
);
1403 * Move the async itxs for a specified object to commit into sync lists.
1406 zil_async_to_sync(zilog_t
*zilog
, uint64_t foid
)
1409 itx_async_node_t
*ian
;
1413 if (spa_freeze_txg(zilog
->zl_spa
) != UINT64_MAX
) /* ziltest support */
1416 otxg
= spa_last_synced_txg(zilog
->zl_spa
) + 1;
1418 for (txg
= otxg
; txg
< (otxg
+ TXG_CONCURRENT_STATES
); txg
++) {
1419 itxg_t
*itxg
= &zilog
->zl_itxg
[txg
& TXG_MASK
];
1421 mutex_enter(&itxg
->itxg_lock
);
1422 if (itxg
->itxg_txg
!= txg
) {
1423 mutex_exit(&itxg
->itxg_lock
);
1428 * If a foid is specified then find that node and append its
1429 * list. Otherwise walk the tree appending all the lists
1430 * to the sync list. We add to the end rather than the
1431 * beginning to ensure the create has happened.
1433 t
= &itxg
->itxg_itxs
->i_async_tree
;
1435 ian
= avl_find(t
, &foid
, &where
);
1437 list_move_tail(&itxg
->itxg_itxs
->i_sync_list
,
1441 void *cookie
= NULL
;
1443 while ((ian
= avl_destroy_nodes(t
, &cookie
)) != NULL
) {
1444 list_move_tail(&itxg
->itxg_itxs
->i_sync_list
,
1446 list_destroy(&ian
->ia_list
);
1447 kmem_free(ian
, sizeof (itx_async_node_t
));
1450 mutex_exit(&itxg
->itxg_lock
);
1455 zil_commit_writer(zilog_t
*zilog
)
1460 spa_t
*spa
= zilog
->zl_spa
;
1463 ASSERT(zilog
->zl_root_zio
== NULL
);
1465 mutex_exit(&zilog
->zl_lock
);
1467 zil_get_commit_list(zilog
);
1470 * Return if there's nothing to commit before we dirty the fs by
1471 * calling zil_create().
1473 if (list_head(&zilog
->zl_itx_commit_list
) == NULL
) {
1474 mutex_enter(&zilog
->zl_lock
);
1478 if (zilog
->zl_suspend
) {
1481 lwb
= list_tail(&zilog
->zl_lwb_list
);
1483 lwb
= zil_create(zilog
);
1486 DTRACE_PROBE1(zil__cw1
, zilog_t
*, zilog
);
1487 while (itx
= list_head(&zilog
->zl_itx_commit_list
)) {
1488 txg
= itx
->itx_lr
.lrc_txg
;
1491 if (txg
> spa_last_synced_txg(spa
) || txg
> spa_freeze_txg(spa
))
1492 lwb
= zil_lwb_commit(zilog
, itx
, lwb
);
1493 list_remove(&zilog
->zl_itx_commit_list
, itx
);
1494 kmem_free(itx
, offsetof(itx_t
, itx_lr
)
1495 + itx
->itx_lr
.lrc_reclen
);
1497 DTRACE_PROBE1(zil__cw2
, zilog_t
*, zilog
);
1499 /* write the last block out */
1500 if (lwb
!= NULL
&& lwb
->lwb_zio
!= NULL
)
1501 lwb
= zil_lwb_write_start(zilog
, lwb
);
1503 zilog
->zl_cur_used
= 0;
1506 * Wait if necessary for the log blocks to be on stable storage.
1508 if (zilog
->zl_root_zio
) {
1509 error
= zio_wait(zilog
->zl_root_zio
);
1510 zilog
->zl_root_zio
= NULL
;
1511 zil_flush_vdevs(zilog
);
1514 if (error
|| lwb
== NULL
)
1515 txg_wait_synced(zilog
->zl_dmu_pool
, 0);
1517 mutex_enter(&zilog
->zl_lock
);
1520 * Remember the highest committed log sequence number for ztest.
1521 * We only update this value when all the log writes succeeded,
1522 * because ztest wants to ASSERT that it got the whole log chain.
1524 if (error
== 0 && lwb
!= NULL
)
1525 zilog
->zl_commit_lr_seq
= zilog
->zl_lr_seq
;
1529 * Commit zfs transactions to stable storage.
1530 * If foid is 0 push out all transactions, otherwise push only those
1531 * for that object or might reference that object.
1533 * itxs are committed in batches. In a heavily stressed zil there will be
1534 * a commit writer thread who is writing out a bunch of itxs to the log
1535 * for a set of committing threads (cthreads) in the same batch as the writer.
1536 * Those cthreads are all waiting on the same cv for that batch.
1538 * There will also be a different and growing batch of threads that are
1539 * waiting to commit (qthreads). When the committing batch completes
1540 * a transition occurs such that the cthreads exit and the qthreads become
1541 * cthreads. One of the new cthreads becomes the writer thread for the
1542 * batch. Any new threads arriving become new qthreads.
1544 * Only 2 condition variables are needed and there's no transition
1545 * between the two cvs needed. They just flip-flop between qthreads
1548 * Using this scheme we can efficiently wakeup up only those threads
1549 * that have been committed.
1552 zil_commit(zilog_t
*zilog
, uint64_t foid
)
1556 if (zilog
->zl_sync
== ZFS_SYNC_DISABLED
)
1559 /* move the async itxs for the foid to the sync queues */
1560 zil_async_to_sync(zilog
, foid
);
1562 mutex_enter(&zilog
->zl_lock
);
1563 mybatch
= zilog
->zl_next_batch
;
1564 while (zilog
->zl_writer
) {
1565 cv_wait(&zilog
->zl_cv_batch
[mybatch
& 1], &zilog
->zl_lock
);
1566 if (mybatch
<= zilog
->zl_com_batch
) {
1567 mutex_exit(&zilog
->zl_lock
);
1572 zilog
->zl_next_batch
++;
1573 zilog
->zl_writer
= B_TRUE
;
1574 zil_commit_writer(zilog
);
1575 zilog
->zl_com_batch
= mybatch
;
1576 zilog
->zl_writer
= B_FALSE
;
1577 mutex_exit(&zilog
->zl_lock
);
1579 /* wake up one thread to become the next writer */
1580 cv_signal(&zilog
->zl_cv_batch
[(mybatch
+1) & 1]);
1582 /* wake up all threads waiting for this batch to be committed */
1583 cv_broadcast(&zilog
->zl_cv_batch
[mybatch
& 1]);
1587 * Called in syncing context to free committed log blocks and update log header.
1590 zil_sync(zilog_t
*zilog
, dmu_tx_t
*tx
)
1592 zil_header_t
*zh
= zil_header_in_syncing_context(zilog
);
1593 uint64_t txg
= dmu_tx_get_txg(tx
);
1594 spa_t
*spa
= zilog
->zl_spa
;
1595 uint64_t *replayed_seq
= &zilog
->zl_replayed_seq
[txg
& TXG_MASK
];
1599 * We don't zero out zl_destroy_txg, so make sure we don't try
1600 * to destroy it twice.
1602 if (spa_sync_pass(spa
) != 1)
1605 mutex_enter(&zilog
->zl_lock
);
1607 ASSERT(zilog
->zl_stop_sync
== 0);
1609 if (*replayed_seq
!= 0) {
1610 ASSERT(zh
->zh_replay_seq
< *replayed_seq
);
1611 zh
->zh_replay_seq
= *replayed_seq
;
1615 if (zilog
->zl_destroy_txg
== txg
) {
1616 blkptr_t blk
= zh
->zh_log
;
1618 ASSERT(list_head(&zilog
->zl_lwb_list
) == NULL
);
1620 bzero(zh
, sizeof (zil_header_t
));
1621 bzero(zilog
->zl_replayed_seq
, sizeof (zilog
->zl_replayed_seq
));
1623 if (zilog
->zl_keep_first
) {
1625 * If this block was part of log chain that couldn't
1626 * be claimed because a device was missing during
1627 * zil_claim(), but that device later returns,
1628 * then this block could erroneously appear valid.
1629 * To guard against this, assign a new GUID to the new
1630 * log chain so it doesn't matter what blk points to.
1632 zil_init_log_chain(zilog
, &blk
);
1637 while ((lwb
= list_head(&zilog
->zl_lwb_list
)) != NULL
) {
1638 zh
->zh_log
= lwb
->lwb_blk
;
1639 if (lwb
->lwb_buf
!= NULL
|| lwb
->lwb_max_txg
> txg
)
1641 list_remove(&zilog
->zl_lwb_list
, lwb
);
1642 zio_free_zil(spa
, txg
, &lwb
->lwb_blk
);
1643 kmem_cache_free(zil_lwb_cache
, lwb
);
1646 * If we don't have anything left in the lwb list then
1647 * we've had an allocation failure and we need to zero
1648 * out the zil_header blkptr so that we don't end
1649 * up freeing the same block twice.
1651 if (list_head(&zilog
->zl_lwb_list
) == NULL
)
1652 BP_ZERO(&zh
->zh_log
);
1654 mutex_exit(&zilog
->zl_lock
);
1660 zil_lwb_cache
= kmem_cache_create("zil_lwb_cache",
1661 sizeof (struct lwb
), 0, NULL
, NULL
, NULL
, NULL
, NULL
, 0);
1667 kmem_cache_destroy(zil_lwb_cache
);
1671 zil_set_sync(zilog_t
*zilog
, uint64_t sync
)
1673 zilog
->zl_sync
= sync
;
1677 zil_set_logbias(zilog_t
*zilog
, uint64_t logbias
)
1679 zilog
->zl_logbias
= logbias
;
1683 zil_alloc(objset_t
*os
, zil_header_t
*zh_phys
)
1687 zilog
= kmem_zalloc(sizeof (zilog_t
), KM_SLEEP
);
1689 zilog
->zl_header
= zh_phys
;
1691 zilog
->zl_spa
= dmu_objset_spa(os
);
1692 zilog
->zl_dmu_pool
= dmu_objset_pool(os
);
1693 zilog
->zl_destroy_txg
= TXG_INITIAL
- 1;
1694 zilog
->zl_logbias
= dmu_objset_logbias(os
);
1695 zilog
->zl_sync
= dmu_objset_syncprop(os
);
1696 zilog
->zl_next_batch
= 1;
1698 mutex_init(&zilog
->zl_lock
, NULL
, MUTEX_DEFAULT
, NULL
);
1700 for (int i
= 0; i
< TXG_SIZE
; i
++) {
1701 mutex_init(&zilog
->zl_itxg
[i
].itxg_lock
, NULL
,
1702 MUTEX_DEFAULT
, NULL
);
1705 list_create(&zilog
->zl_lwb_list
, sizeof (lwb_t
),
1706 offsetof(lwb_t
, lwb_node
));
1708 list_create(&zilog
->zl_itx_commit_list
, sizeof (itx_t
),
1709 offsetof(itx_t
, itx_node
));
1711 mutex_init(&zilog
->zl_vdev_lock
, NULL
, MUTEX_DEFAULT
, NULL
);
1713 avl_create(&zilog
->zl_vdev_tree
, zil_vdev_compare
,
1714 sizeof (zil_vdev_node_t
), offsetof(zil_vdev_node_t
, zv_node
));
1716 cv_init(&zilog
->zl_cv_writer
, NULL
, CV_DEFAULT
, NULL
);
1717 cv_init(&zilog
->zl_cv_suspend
, NULL
, CV_DEFAULT
, NULL
);
1718 cv_init(&zilog
->zl_cv_batch
[0], NULL
, CV_DEFAULT
, NULL
);
1719 cv_init(&zilog
->zl_cv_batch
[1], NULL
, CV_DEFAULT
, NULL
);
1725 zil_free(zilog_t
*zilog
)
1727 zilog
->zl_stop_sync
= 1;
1729 ASSERT0(zilog
->zl_suspend
);
1730 ASSERT0(zilog
->zl_suspending
);
1732 ASSERT(list_is_empty(&zilog
->zl_lwb_list
));
1733 list_destroy(&zilog
->zl_lwb_list
);
1735 avl_destroy(&zilog
->zl_vdev_tree
);
1736 mutex_destroy(&zilog
->zl_vdev_lock
);
1738 ASSERT(list_is_empty(&zilog
->zl_itx_commit_list
));
1739 list_destroy(&zilog
->zl_itx_commit_list
);
1741 for (int i
= 0; i
< TXG_SIZE
; i
++) {
1743 * It's possible for an itx to be generated that doesn't dirty
1744 * a txg (e.g. ztest TX_TRUNCATE). So there's no zil_clean()
1745 * callback to remove the entry. We remove those here.
1747 * Also free up the ziltest itxs.
1749 if (zilog
->zl_itxg
[i
].itxg_itxs
)
1750 zil_itxg_clean(zilog
->zl_itxg
[i
].itxg_itxs
);
1751 mutex_destroy(&zilog
->zl_itxg
[i
].itxg_lock
);
1754 mutex_destroy(&zilog
->zl_lock
);
1756 cv_destroy(&zilog
->zl_cv_writer
);
1757 cv_destroy(&zilog
->zl_cv_suspend
);
1758 cv_destroy(&zilog
->zl_cv_batch
[0]);
1759 cv_destroy(&zilog
->zl_cv_batch
[1]);
1761 kmem_free(zilog
, sizeof (zilog_t
));
1765 * Open an intent log.
1768 zil_open(objset_t
*os
, zil_get_data_t
*get_data
)
1770 zilog_t
*zilog
= dmu_objset_zil(os
);
1772 ASSERT(zilog
->zl_clean_taskq
== NULL
);
1773 ASSERT(zilog
->zl_get_data
== NULL
);
1774 ASSERT(list_is_empty(&zilog
->zl_lwb_list
));
1776 zilog
->zl_get_data
= get_data
;
1777 zilog
->zl_clean_taskq
= taskq_create("zil_clean", 1, minclsyspri
,
1778 2, 2, TASKQ_PREPOPULATE
);
1784 * Close an intent log.
1787 zil_close(zilog_t
*zilog
)
1792 zil_commit(zilog
, 0); /* commit all itx */
1795 * The lwb_max_txg for the stubby lwb will reflect the last activity
1796 * for the zil. After a txg_wait_synced() on the txg we know all the
1797 * callbacks have occurred that may clean the zil. Only then can we
1798 * destroy the zl_clean_taskq.
1800 mutex_enter(&zilog
->zl_lock
);
1801 lwb
= list_tail(&zilog
->zl_lwb_list
);
1803 txg
= lwb
->lwb_max_txg
;
1804 mutex_exit(&zilog
->zl_lock
);
1806 txg_wait_synced(zilog
->zl_dmu_pool
, txg
);
1807 ASSERT(!zilog_is_dirty(zilog
));
1809 taskq_destroy(zilog
->zl_clean_taskq
);
1810 zilog
->zl_clean_taskq
= NULL
;
1811 zilog
->zl_get_data
= NULL
;
1814 * We should have only one LWB left on the list; remove it now.
1816 mutex_enter(&zilog
->zl_lock
);
1817 lwb
= list_head(&zilog
->zl_lwb_list
);
1819 ASSERT(lwb
== list_tail(&zilog
->zl_lwb_list
));
1820 list_remove(&zilog
->zl_lwb_list
, lwb
);
1821 zio_buf_free(lwb
->lwb_buf
, lwb
->lwb_sz
);
1822 kmem_cache_free(zil_lwb_cache
, lwb
);
1824 mutex_exit(&zilog
->zl_lock
);
1827 static char *suspend_tag
= "zil suspending";
1830 * Suspend an intent log. While in suspended mode, we still honor
1831 * synchronous semantics, but we rely on txg_wait_synced() to do it.
1832 * On old version pools, we suspend the log briefly when taking a
1833 * snapshot so that it will have an empty intent log.
1835 * Long holds are not really intended to be used the way we do here --
1836 * held for such a short time. A concurrent caller of dsl_dataset_long_held()
1837 * could fail. Therefore we take pains to only put a long hold if it is
1838 * actually necessary. Fortunately, it will only be necessary if the
1839 * objset is currently mounted (or the ZVOL equivalent). In that case it
1840 * will already have a long hold, so we are not really making things any worse.
1842 * Ideally, we would locate the existing long-holder (i.e. the zfsvfs_t or
1843 * zvol_state_t), and use their mechanism to prevent their hold from being
1844 * dropped (e.g. VFS_HOLD()). However, that would be even more pain for
1847 * if cookiep == NULL, this does both the suspend & resume.
1848 * Otherwise, it returns with the dataset "long held", and the cookie
1849 * should be passed into zil_resume().
1852 zil_suspend(const char *osname
, void **cookiep
)
1856 const zil_header_t
*zh
;
1859 error
= dmu_objset_hold(osname
, suspend_tag
, &os
);
1862 zilog
= dmu_objset_zil(os
);
1864 mutex_enter(&zilog
->zl_lock
);
1865 zh
= zilog
->zl_header
;
1867 if (zh
->zh_flags
& ZIL_REPLAY_NEEDED
) { /* unplayed log */
1868 mutex_exit(&zilog
->zl_lock
);
1869 dmu_objset_rele(os
, suspend_tag
);
1870 return (SET_ERROR(EBUSY
));
1874 * Don't put a long hold in the cases where we can avoid it. This
1875 * is when there is no cookie so we are doing a suspend & resume
1876 * (i.e. called from zil_vdev_offline()), and there's nothing to do
1877 * for the suspend because it's already suspended, or there's no ZIL.
1879 if (cookiep
== NULL
&& !zilog
->zl_suspending
&&
1880 (zilog
->zl_suspend
> 0 || BP_IS_HOLE(&zh
->zh_log
))) {
1881 mutex_exit(&zilog
->zl_lock
);
1882 dmu_objset_rele(os
, suspend_tag
);
1886 dsl_dataset_long_hold(dmu_objset_ds(os
), suspend_tag
);
1887 dsl_pool_rele(dmu_objset_pool(os
), suspend_tag
);
1889 zilog
->zl_suspend
++;
1891 if (zilog
->zl_suspend
> 1) {
1893 * Someone else is already suspending it.
1894 * Just wait for them to finish.
1897 while (zilog
->zl_suspending
)
1898 cv_wait(&zilog
->zl_cv_suspend
, &zilog
->zl_lock
);
1899 mutex_exit(&zilog
->zl_lock
);
1901 if (cookiep
== NULL
)
1909 * If there is no pointer to an on-disk block, this ZIL must not
1910 * be active (e.g. filesystem not mounted), so there's nothing
1913 if (BP_IS_HOLE(&zh
->zh_log
)) {
1914 ASSERT(cookiep
!= NULL
); /* fast path already handled */
1917 mutex_exit(&zilog
->zl_lock
);
1921 zilog
->zl_suspending
= B_TRUE
;
1922 mutex_exit(&zilog
->zl_lock
);
1924 zil_commit(zilog
, 0);
1926 zil_destroy(zilog
, B_FALSE
);
1928 mutex_enter(&zilog
->zl_lock
);
1929 zilog
->zl_suspending
= B_FALSE
;
1930 cv_broadcast(&zilog
->zl_cv_suspend
);
1931 mutex_exit(&zilog
->zl_lock
);
1933 if (cookiep
== NULL
)
1941 zil_resume(void *cookie
)
1943 objset_t
*os
= cookie
;
1944 zilog_t
*zilog
= dmu_objset_zil(os
);
1946 mutex_enter(&zilog
->zl_lock
);
1947 ASSERT(zilog
->zl_suspend
!= 0);
1948 zilog
->zl_suspend
--;
1949 mutex_exit(&zilog
->zl_lock
);
1950 dsl_dataset_long_rele(dmu_objset_ds(os
), suspend_tag
);
1951 dsl_dataset_rele(dmu_objset_ds(os
), suspend_tag
);
1954 typedef struct zil_replay_arg
{
1955 zil_replay_func_t
**zr_replay
;
1957 boolean_t zr_byteswap
;
1962 zil_replay_error(zilog_t
*zilog
, lr_t
*lr
, int error
)
1964 char name
[MAXNAMELEN
];
1966 zilog
->zl_replaying_seq
--; /* didn't actually replay this one */
1968 dmu_objset_name(zilog
->zl_os
, name
);
1970 cmn_err(CE_WARN
, "ZFS replay transaction error %d, "
1971 "dataset %s, seq 0x%llx, txtype %llu %s\n", error
, name
,
1972 (u_longlong_t
)lr
->lrc_seq
,
1973 (u_longlong_t
)(lr
->lrc_txtype
& ~TX_CI
),
1974 (lr
->lrc_txtype
& TX_CI
) ? "CI" : "");
1980 zil_replay_log_record(zilog_t
*zilog
, lr_t
*lr
, void *zra
, uint64_t claim_txg
)
1982 zil_replay_arg_t
*zr
= zra
;
1983 const zil_header_t
*zh
= zilog
->zl_header
;
1984 uint64_t reclen
= lr
->lrc_reclen
;
1985 uint64_t txtype
= lr
->lrc_txtype
;
1988 zilog
->zl_replaying_seq
= lr
->lrc_seq
;
1990 if (lr
->lrc_seq
<= zh
->zh_replay_seq
) /* already replayed */
1993 if (lr
->lrc_txg
< claim_txg
) /* already committed */
1996 /* Strip case-insensitive bit, still present in log record */
1999 if (txtype
== 0 || txtype
>= TX_MAX_TYPE
)
2000 return (zil_replay_error(zilog
, lr
, EINVAL
));
2003 * If this record type can be logged out of order, the object
2004 * (lr_foid) may no longer exist. That's legitimate, not an error.
2006 if (TX_OOO(txtype
)) {
2007 error
= dmu_object_info(zilog
->zl_os
,
2008 ((lr_ooo_t
*)lr
)->lr_foid
, NULL
);
2009 if (error
== ENOENT
|| error
== EEXIST
)
2014 * Make a copy of the data so we can revise and extend it.
2016 bcopy(lr
, zr
->zr_lr
, reclen
);
2019 * If this is a TX_WRITE with a blkptr, suck in the data.
2021 if (txtype
== TX_WRITE
&& reclen
== sizeof (lr_write_t
)) {
2022 error
= zil_read_log_data(zilog
, (lr_write_t
*)lr
,
2023 zr
->zr_lr
+ reclen
);
2025 return (zil_replay_error(zilog
, lr
, error
));
2029 * The log block containing this lr may have been byteswapped
2030 * so that we can easily examine common fields like lrc_txtype.
2031 * However, the log is a mix of different record types, and only the
2032 * replay vectors know how to byteswap their records. Therefore, if
2033 * the lr was byteswapped, undo it before invoking the replay vector.
2035 if (zr
->zr_byteswap
)
2036 byteswap_uint64_array(zr
->zr_lr
, reclen
);
2039 * We must now do two things atomically: replay this log record,
2040 * and update the log header sequence number to reflect the fact that
2041 * we did so. At the end of each replay function the sequence number
2042 * is updated if we are in replay mode.
2044 error
= zr
->zr_replay
[txtype
](zr
->zr_arg
, zr
->zr_lr
, zr
->zr_byteswap
);
2047 * The DMU's dnode layer doesn't see removes until the txg
2048 * commits, so a subsequent claim can spuriously fail with
2049 * EEXIST. So if we receive any error we try syncing out
2050 * any removes then retry the transaction. Note that we
2051 * specify B_FALSE for byteswap now, so we don't do it twice.
2053 txg_wait_synced(spa_get_dsl(zilog
->zl_spa
), 0);
2054 error
= zr
->zr_replay
[txtype
](zr
->zr_arg
, zr
->zr_lr
, B_FALSE
);
2056 return (zil_replay_error(zilog
, lr
, error
));
2063 zil_incr_blks(zilog_t
*zilog
, blkptr_t
*bp
, void *arg
, uint64_t claim_txg
)
2065 zilog
->zl_replay_blks
++;
2071 * If this dataset has a non-empty intent log, replay it and destroy it.
2074 zil_replay(objset_t
*os
, void *arg
, zil_replay_func_t
*replay_func
[TX_MAX_TYPE
])
2076 zilog_t
*zilog
= dmu_objset_zil(os
);
2077 const zil_header_t
*zh
= zilog
->zl_header
;
2078 zil_replay_arg_t zr
;
2080 if ((zh
->zh_flags
& ZIL_REPLAY_NEEDED
) == 0) {
2081 zil_destroy(zilog
, B_TRUE
);
2085 zr
.zr_replay
= replay_func
;
2087 zr
.zr_byteswap
= BP_SHOULD_BYTESWAP(&zh
->zh_log
);
2088 zr
.zr_lr
= kmem_alloc(2 * SPA_MAXBLOCKSIZE
, KM_SLEEP
);
2091 * Wait for in-progress removes to sync before starting replay.
2093 txg_wait_synced(zilog
->zl_dmu_pool
, 0);
2095 zilog
->zl_replay
= B_TRUE
;
2096 zilog
->zl_replay_time
= ddi_get_lbolt();
2097 ASSERT(zilog
->zl_replay_blks
== 0);
2098 (void) zil_parse(zilog
, zil_incr_blks
, zil_replay_log_record
, &zr
,
2100 kmem_free(zr
.zr_lr
, 2 * SPA_MAXBLOCKSIZE
);
2102 zil_destroy(zilog
, B_FALSE
);
2103 txg_wait_synced(zilog
->zl_dmu_pool
, zilog
->zl_destroy_txg
);
2104 zilog
->zl_replay
= B_FALSE
;
2108 zil_replaying(zilog_t
*zilog
, dmu_tx_t
*tx
)
2110 if (zilog
->zl_sync
== ZFS_SYNC_DISABLED
)
2113 if (zilog
->zl_replay
) {
2114 dsl_dataset_dirty(dmu_objset_ds(zilog
->zl_os
), tx
);
2115 zilog
->zl_replayed_seq
[dmu_tx_get_txg(tx
) & TXG_MASK
] =
2116 zilog
->zl_replaying_seq
;
2125 zil_vdev_offline(const char *osname
, void *arg
)
2129 error
= zil_suspend(osname
, NULL
);
2131 return (SET_ERROR(EEXIST
));