4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright (c) 2012, Joyent Inc. All rights reserved.
27 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
28 /* All Rights Reserved */
30 #include <sys/types.h>
31 #include <sys/sysmacros.h>
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/errno.h>
35 #include <sys/signal.h>
40 #include <sys/vnode.h>
41 #include <sys/pathname.h>
45 #include <sys/cpuvar.h>
47 #include <sys/cmn_err.h>
48 #include <sys/priocntl.h>
49 #include <sys/procset.h>
50 #include <sys/prsystm.h>
51 #include <sys/debug.h>
53 #include <sys/atomic.h>
54 #include <sys/fcntl.h>
57 #include <sys/port_impl.h>
58 #include <sys/dtrace.h>
61 #include <sys/nbmlock.h>
65 static uint32_t afd_maxfd
; /* # of entries in maximum allocated array */
66 static uint32_t afd_alloc
; /* count of kmem_alloc()s */
67 static uint32_t afd_free
; /* count of kmem_free()s */
68 static uint32_t afd_wait
; /* count of waits on non-zero ref count */
69 #define MAXFD(x) (afd_maxfd = ((afd_maxfd >= (x))? afd_maxfd : (x)))
70 #define COUNT(x) atomic_add_32(&x, 1)
79 kmem_cache_t
*file_cache
;
81 static void port_close_fd(portfd_t
*);
84 * File descriptor allocation.
86 * fd_find(fip, minfd) finds the first available descriptor >= minfd.
87 * The most common case is open(2), in which minfd = 0, but we must also
88 * support fcntl(fd, F_DUPFD, minfd).
90 * The algorithm is as follows: we keep all file descriptors in an infix
91 * binary tree in which each node records the number of descriptors
92 * allocated in its right subtree, including itself. Starting at minfd,
93 * we ascend the tree until we find a non-fully allocated right subtree.
94 * We then descend that subtree in a binary search for the smallest fd.
95 * Finally, we ascend the tree again to increment the allocation count
96 * of every subtree containing the newly-allocated fd. Freeing an fd
97 * requires only the last step: we ascend the tree to decrement allocation
98 * counts. Each of these three steps (ascent to find non-full subtree,
99 * descent to find lowest fd, ascent to update allocation counts) is
100 * O(log n), thus the algorithm as a whole is O(log n).
102 * We don't implement the fd tree using the customary left/right/parent
103 * pointers, but instead take advantage of the glorious mathematics of
104 * full infix binary trees. For reference, here's an illustration of the
105 * logical structure of such a tree, rooted at 4 (binary 100), covering
106 * the range 1-7 (binary 001-111). Our canonical trees do not include
107 * fd 0; we'll deal with that later.
116 * We make the following observations, all of which are easily proven by
117 * induction on the depth of the tree:
119 * (T1) The least-significant bit (LSB) of any node is equal to its level
120 * in the tree. In our example, nodes 001, 011, 101 and 111 are at
121 * level 0; nodes 010 and 110 are at level 1; and node 100 is at level 2.
123 * (T2) The child size (CSIZE) of node N -- that is, the total number of
124 * right-branch descendants in a child of node N, including itself -- is
125 * given by clearing all but the least significant bit of N. This
126 * follows immediately from (T1). Applying this rule to our example, we
127 * see that CSIZE(100) = 100, CSIZE(x10) = 10, and CSIZE(xx1) = 1.
129 * (T3) The nearest left ancestor (LPARENT) of node N -- that is, the nearest
130 * ancestor containing node N in its right child -- is given by clearing
131 * the LSB of N. For example, LPARENT(111) = 110 and LPARENT(110) = 100.
132 * Clearing the LSB of nodes 001, 010 or 100 yields zero, reflecting
133 * the fact that these are leftmost nodes. Note that this algorithm
134 * automatically skips generations as necessary. For example, the parent
135 * of node 101 is 110, which is a *right* ancestor (not what we want);
136 * but its grandparent is 100, which is a left ancestor. Clearing the LSB
137 * of 101 gets us to 100 directly, skipping right past the uninteresting
140 * Note that since LPARENT clears the LSB, whereas CSIZE clears all *but*
141 * the LSB, we can express LPARENT() nicely in terms of CSIZE():
143 * LPARENT(N) = N - CSIZE(N)
145 * (T4) The nearest right ancestor (RPARENT) of node N is given by:
147 * RPARENT(N) = N + CSIZE(N)
149 * (T5) For every interior node, the children differ from their parent by
150 * CSIZE(parent) / 2. In our example, CSIZE(100) / 2 = 2 = 10 binary,
151 * and indeed, the children of 100 are 100 +/- 10 = 010 and 110.
153 * Next, we'll need a few two's-complement math tricks. Suppose a number,
154 * N, has the following form:
158 * That is, the binary representation of N consists of some string of bits,
159 * then a 1, then all zeroes. This amounts to nothing more than saying that
160 * N has a least-significant bit, which is true for any N != 0. If we look
161 * at N and N - 1 together, we see that we can combine them in useful ways:
165 * ------------------------
166 * N & (N - 1) = xxxx000000
167 * N | (N - 1) = xxxx111111
168 * N ^ (N - 1) = 111111
170 * In particular, this suggests several easy ways to clear all but the LSB,
171 * which by (T2) is exactly what we need to determine CSIZE(N) = 10...0.
172 * We'll opt for this formulation:
174 * (C1) CSIZE(N) = (N - 1) ^ (N | (N - 1))
176 * Similarly, we have an easy way to determine LPARENT(N), which requires
177 * that we clear the LSB of N:
179 * (L1) LPARENT(N) = N & (N - 1)
181 * We note in the above relations that (N | (N - 1)) - N = CSIZE(N) - 1.
182 * When combined with (T4), this yields an easy way to compute RPARENT(N):
184 * (R1) RPARENT(N) = (N | (N - 1)) + 1
186 * Finally, to accommodate fd 0 we must adjust all of our results by +/-1 to
187 * move the fd range from [1, 2^n) to [0, 2^n - 1). This is straightforward,
188 * so there's no need to belabor the algebra; the revised relations become:
190 * (C1a) CSIZE(N) = N ^ (N | (N + 1))
192 * (L1a) LPARENT(N) = (N & (N + 1)) - 1
194 * (R1a) RPARENT(N) = N | (N + 1)
196 * This completes the mathematical framework. We now have all the tools
197 * we need to implement fd_find() and fd_reserve().
199 * fd_find(fip, minfd) finds the smallest available file descriptor >= minfd.
200 * It does not actually allocate the descriptor; that's done by fd_reserve().
201 * fd_find() proceeds in two steps:
203 * (1) Find the leftmost subtree that contains a descriptor >= minfd.
204 * We start at the right subtree rooted at minfd. If this subtree is
205 * not full -- if fip->fi_list[minfd].uf_alloc != CSIZE(minfd) -- then
206 * step 1 is done. Otherwise, we know that all fds in this subtree
207 * are taken, so we ascend to RPARENT(minfd) using (R1a). We repeat
208 * this process until we either find a candidate subtree or exceed
209 * fip->fi_nfiles. We use (C1a) to compute CSIZE().
211 * (2) Find the smallest fd in the subtree discovered by step 1.
212 * Starting at the root of this subtree, we descend to find the
213 * smallest available fd. Since the left children have the smaller
214 * fds, we will descend rightward only when the left child is full.
216 * We begin by comparing the number of allocated fds in the root
217 * to the number of allocated fds in its right child; if they differ
218 * by exactly CSIZE(child), we know the left subtree is full, so we
219 * descend right; that is, the right child becomes the search root.
220 * Otherwise we leave the root alone and start following the right
221 * child's left children. As fortune would have it, this is very
222 * simple computationally: by (T5), the right child of fd is just
223 * fd + size, where size = CSIZE(fd) / 2. Applying (T5) again,
224 * we find that the right child's left child is fd + size - (size / 2) =
225 * fd + (size / 2); *its* left child is fd + (size / 2) - (size / 4) =
226 * fd + (size / 4), and so on. In general, fd's right child's
227 * leftmost nth descendant is fd + (size >> n). Thus, to follow
228 * the right child's left descendants, we just halve the size in
229 * each iteration of the search.
231 * When we descend leftward, we must keep track of the number of fds
232 * that were allocated in all the right subtrees we rejected, so we
233 * know how many of the root fd's allocations are in the remaining
234 * (as yet unexplored) leftmost part of its right subtree. When we
235 * encounter a fully-allocated left child -- that is, when we find
236 * that fip->fi_list[fd].uf_alloc == ralloc + size -- we descend right
237 * (as described earlier), resetting ralloc to zero.
239 * fd_reserve(fip, fd, incr) either allocates or frees fd, depending
240 * on whether incr is 1 or -1. Starting at fd, fd_reserve() ascends
241 * the leftmost ancestors (see (T3)) and updates the allocation counts.
242 * At each step we use (L1a) to compute LPARENT(), the next left ancestor.
244 * flist_minsize() finds the minimal tree that still covers all
245 * used fds; as long as the allocation count of a root node is zero, we
246 * don't need that node or its right subtree.
248 * flist_nalloc() counts the number of allocated fds in the tree, by starting
249 * at the top of the tree and summing the right-subtree allocation counts as
250 * it descends leftwards.
252 * Note: we assume that flist_grow() will keep fip->fi_nfiles of the form
253 * 2^n - 1. This ensures that the fd trees are always full, which saves
254 * quite a bit of boundary checking.
257 fd_find(uf_info_t
*fip
, int minfd
)
259 int size
, ralloc
, fd
;
261 ASSERT(MUTEX_HELD(&fip
->fi_lock
));
262 ASSERT((fip
->fi_nfiles
& (fip
->fi_nfiles
+ 1)) == 0);
264 for (fd
= minfd
; (uint_t
)fd
< fip
->fi_nfiles
; fd
|= fd
+ 1) {
265 size
= fd
^ (fd
| (fd
+ 1));
266 if (fip
->fi_list
[fd
].uf_alloc
== size
)
268 for (ralloc
= 0, size
>>= 1; size
!= 0; size
>>= 1) {
269 ralloc
+= fip
->fi_list
[fd
+ size
].uf_alloc
;
270 if (fip
->fi_list
[fd
].uf_alloc
== ralloc
+ size
) {
281 fd_reserve(uf_info_t
*fip
, int fd
, int incr
)
284 uf_entry_t
*ufp
= &fip
->fi_list
[fd
];
286 ASSERT((uint_t
)fd
< fip
->fi_nfiles
);
287 ASSERT((ufp
->uf_busy
== 0 && incr
== 1) ||
288 (ufp
->uf_busy
== 1 && incr
== -1));
289 ASSERT(MUTEX_HELD(&ufp
->uf_lock
));
290 ASSERT(MUTEX_HELD(&fip
->fi_lock
));
292 for (pfd
= fd
; pfd
>= 0; pfd
= (pfd
& (pfd
+ 1)) - 1)
293 fip
->fi_list
[pfd
].uf_alloc
+= incr
;
295 ufp
->uf_busy
+= incr
;
299 flist_minsize(uf_info_t
*fip
)
304 * We'd like to ASSERT(MUTEX_HELD(&fip->fi_lock)), but we're called
305 * by flist_fork(), which relies on other mechanisms for mutual
308 ASSERT((fip
->fi_nfiles
& (fip
->fi_nfiles
+ 1)) == 0);
310 for (fd
= fip
->fi_nfiles
; fd
!= 0; fd
>>= 1)
311 if (fip
->fi_list
[fd
>> 1].uf_alloc
!= 0)
318 flist_nalloc(uf_info_t
*fip
)
323 ASSERT(MUTEX_HELD(&fip
->fi_lock
));
324 ASSERT((fip
->fi_nfiles
& (fip
->fi_nfiles
+ 1)) == 0);
326 for (fd
= fip
->fi_nfiles
; fd
!= 0; fd
>>= 1)
327 nalloc
+= fip
->fi_list
[fd
>> 1].uf_alloc
;
333 * Increase size of the fi_list array to accommodate at least maxfd.
334 * We keep the size of the form 2^n - 1 for benefit of fd_find().
337 flist_grow(int maxfd
)
339 uf_info_t
*fip
= P_FINFO(curproc
);
341 uf_entry_t
*src
, *dst
, *newlist
, *oldlist
, *newend
, *oldend
;
344 for (newcnt
= 1; newcnt
<= maxfd
; newcnt
= (newcnt
<< 1) | 1)
347 newlist
= kmem_zalloc(newcnt
* sizeof (uf_entry_t
), KM_SLEEP
);
349 mutex_enter(&fip
->fi_lock
);
350 oldcnt
= fip
->fi_nfiles
;
351 if (newcnt
<= oldcnt
) {
352 mutex_exit(&fip
->fi_lock
);
353 kmem_free(newlist
, newcnt
* sizeof (uf_entry_t
));
356 ASSERT((newcnt
& (newcnt
+ 1)) == 0);
357 oldlist
= fip
->fi_list
;
358 oldend
= oldlist
+ oldcnt
;
359 newend
= newlist
+ oldcnt
; /* no need to lock beyond old end */
362 * fi_list and fi_nfiles cannot change while any uf_lock is held,
363 * so we must grab all the old locks *and* the new locks up to oldcnt.
364 * (Locks beyond the end of oldcnt aren't visible until we store
365 * the new fi_nfiles, which is the last thing we do before dropping
366 * all the locks, so there's no need to acquire these locks).
367 * Holding the new locks is necessary because when fi_list changes
368 * to point to the new list, fi_nfiles won't have been stored yet.
369 * If we *didn't* hold the new locks, someone doing a UF_ENTER()
370 * could see the new fi_list, grab the new uf_lock, and then see
371 * fi_nfiles change while the lock is held -- in violation of
372 * UF_ENTER() semantics.
374 for (src
= oldlist
; src
< oldend
; src
++)
375 mutex_enter(&src
->uf_lock
);
377 for (dst
= newlist
; dst
< newend
; dst
++)
378 mutex_enter(&dst
->uf_lock
);
380 for (src
= oldlist
, dst
= newlist
; src
< oldend
; src
++, dst
++) {
381 dst
->uf_file
= src
->uf_file
;
382 dst
->uf_fpollinfo
= src
->uf_fpollinfo
;
383 dst
->uf_refcnt
= src
->uf_refcnt
;
384 dst
->uf_alloc
= src
->uf_alloc
;
385 dst
->uf_flag
= src
->uf_flag
;
386 dst
->uf_busy
= src
->uf_busy
;
387 dst
->uf_portfd
= src
->uf_portfd
;
391 * As soon as we store the new flist, future locking operations
392 * will use it. Therefore, we must ensure that all the state
393 * we've just established reaches global visibility before the
397 fip
->fi_list
= newlist
;
400 * Routines like getf() make an optimistic check on the validity
401 * of the supplied file descriptor: if it's less than the current
402 * value of fi_nfiles -- examined without any locks -- then it's
403 * safe to attempt a UF_ENTER() on that fd (which is a valid
404 * assumption because fi_nfiles only increases). Therefore, it
405 * is critical that the new value of fi_nfiles not reach global
406 * visibility until after the new fi_list: if it happened the
407 * other way around, getf() could see the new fi_nfiles and attempt
408 * a UF_ENTER() on the old fi_list, which would write beyond its
409 * end if the fd exceeded the old fi_nfiles.
412 fip
->fi_nfiles
= newcnt
;
415 * The new state is consistent now, so we can drop all the locks.
417 for (dst
= newlist
; dst
< newend
; dst
++)
418 mutex_exit(&dst
->uf_lock
);
420 for (src
= oldlist
; src
< oldend
; src
++) {
422 * If any threads are blocked on the old cvs, wake them.
423 * This will force them to wake up, discover that fi_list
424 * has changed, and go back to sleep on the new cvs.
426 cv_broadcast(&src
->uf_wanted_cv
);
427 cv_broadcast(&src
->uf_closing_cv
);
428 mutex_exit(&src
->uf_lock
);
431 mutex_exit(&fip
->fi_lock
);
434 * Retire the old flist. We can't actually kmem_free() it now
435 * because someone may still have a pointer to it. Instead,
436 * we link it onto a list of retired flists. The new flist
437 * is at least double the size of the previous flist, so the
438 * total size of all retired flists will be less than the size
439 * of the current one (to prove, consider the sum of a geometric
440 * series in powers of 2). exit() frees the retired flists.
442 urp
= kmem_zalloc(sizeof (uf_rlist_t
), KM_SLEEP
);
443 urp
->ur_list
= oldlist
;
444 urp
->ur_nfiles
= oldcnt
;
446 mutex_enter(&fip
->fi_lock
);
447 urp
->ur_next
= fip
->fi_rlist
;
449 mutex_exit(&fip
->fi_lock
);
453 * Utility functions for keeping track of the active file descriptors.
456 clear_stale_fd() /* called from post_syscall() */
458 afd_t
*afd
= &curthread
->t_activefd
;
461 /* uninitialized is ok here, a_nfd is then zero */
462 for (i
= 0; i
< afd
->a_nfd
; i
++) {
463 /* assert that this should not be necessary */
464 ASSERT(afd
->a_fd
[i
] == -1);
471 free_afd(afd_t
*afd
) /* called below and from thread_free() */
475 /* free the buffer if it was kmem_alloc()ed */
476 if (afd
->a_nfd
> sizeof (afd
->a_buf
) / sizeof (afd
->a_buf
[0])) {
478 kmem_free(afd
->a_fd
, afd
->a_nfd
* sizeof (afd
->a_fd
[0]));
481 /* (re)initialize the structure */
482 afd
->a_fd
= &afd
->a_buf
[0];
483 afd
->a_nfd
= sizeof (afd
->a_buf
) / sizeof (afd
->a_buf
[0]);
485 for (i
= 0; i
< afd
->a_nfd
; i
++)
490 set_active_fd(int fd
)
492 afd_t
*afd
= &curthread
->t_activefd
;
499 if (afd
->a_nfd
== 0) { /* first time initialization */
501 mutex_enter(&afd
->a_fdlock
);
503 mutex_exit(&afd
->a_fdlock
);
506 /* insert fd into vacant slot, if any */
507 for (i
= 0; i
< afd
->a_nfd
; i
++) {
508 if (afd
->a_fd
[i
] == -1) {
515 * Reallocate the a_fd[] array to add one more slot.
518 old_nfd
= afd
->a_nfd
;
520 new_nfd
= old_nfd
+ 1;
521 new_fd
= kmem_alloc(new_nfd
* sizeof (afd
->a_fd
[0]), KM_SLEEP
);
525 mutex_enter(&afd
->a_fdlock
);
527 afd
->a_nfd
= new_nfd
;
528 for (i
= 0; i
< old_nfd
; i
++)
529 afd
->a_fd
[i
] = old_fd
[i
];
531 mutex_exit(&afd
->a_fdlock
);
533 if (old_nfd
> sizeof (afd
->a_buf
) / sizeof (afd
->a_buf
[0])) {
535 kmem_free(old_fd
, old_nfd
* sizeof (afd
->a_fd
[0]));
540 clear_active_fd(int fd
) /* called below and from aio.c */
542 afd_t
*afd
= &curthread
->t_activefd
;
545 for (i
= 0; i
< afd
->a_nfd
; i
++) {
546 if (afd
->a_fd
[i
] == fd
) {
551 ASSERT(i
< afd
->a_nfd
); /* not found is not ok */
555 * Does this thread have this fd active?
558 is_active_fd(kthread_t
*t
, int fd
)
560 afd_t
*afd
= &t
->t_activefd
;
563 ASSERT(t
!= curthread
);
564 mutex_enter(&afd
->a_fdlock
);
565 /* uninitialized is ok here, a_nfd is then zero */
566 for (i
= 0; i
< afd
->a_nfd
; i
++) {
567 if (afd
->a_fd
[i
] == fd
) {
568 mutex_exit(&afd
->a_fdlock
);
572 mutex_exit(&afd
->a_fdlock
);
577 * Convert a user supplied file descriptor into a pointer to a file
578 * structure. Only task is to check range of the descriptor (soft
579 * resource limit was enforced at open time and shouldn't be checked
585 uf_info_t
*fip
= P_FINFO(curproc
);
589 if ((uint_t
)fd
>= fip
->fi_nfiles
)
593 * Reserve a slot in the active fd array now so we can call
594 * set_active_fd(fd) for real below, while still inside UF_ENTER().
598 UF_ENTER(ufp
, fip
, fd
);
600 if ((fp
= ufp
->uf_file
) == NULL
) {
603 if (fd
== fip
->fi_badfd
&& fip
->fi_action
> 0)
604 tsignal(curthread
, fip
->fi_action
);
610 set_active_fd(fd
); /* record the active file descriptor */
618 * Close whatever file currently occupies the file descriptor slot
619 * and install the new file, usually NULL, in the file descriptor slot.
620 * The close must complete before we release the file descriptor slot.
621 * If newfp != NULL we only return an error if we can't allocate the
622 * slot so the caller knows that it needs to free the filep;
623 * in the other cases we return the error number from closef().
626 closeandsetf(int fd
, file_t
*newfp
)
629 uf_info_t
*fip
= P_FINFO(p
);
636 if ((uint_t
)fd
>= fip
->fi_nfiles
) {
644 * If ufp is reserved but has no file pointer, it's in the
645 * transition between ufalloc() and setf(). We must wait
646 * for this transition to complete before assigning the
647 * new non-NULL file pointer.
649 mutex_enter(&fip
->fi_lock
);
650 if (fd
== fip
->fi_badfd
) {
651 mutex_exit(&fip
->fi_lock
);
652 if (fip
->fi_action
> 0)
653 tsignal(curthread
, fip
->fi_action
);
656 UF_ENTER(ufp
, fip
, fd
);
657 while (ufp
->uf_busy
&& ufp
->uf_file
== NULL
) {
658 mutex_exit(&fip
->fi_lock
);
659 cv_wait_stop(&ufp
->uf_wanted_cv
, &ufp
->uf_lock
, 250);
661 mutex_enter(&fip
->fi_lock
);
662 UF_ENTER(ufp
, fip
, fd
);
664 if ((fp
= ufp
->uf_file
) == NULL
) {
665 ASSERT(ufp
->uf_fpollinfo
== NULL
);
666 ASSERT(ufp
->uf_flag
== 0);
667 fd_reserve(fip
, fd
, 1);
668 ufp
->uf_file
= newfp
;
670 mutex_exit(&fip
->fi_lock
);
673 mutex_exit(&fip
->fi_lock
);
675 UF_ENTER(ufp
, fip
, fd
);
676 if ((fp
= ufp
->uf_file
) == NULL
) {
682 ASSERT(ufp
->uf_busy
);
687 * If the file descriptor reference count is non-zero, then
688 * some other lwp in the process is performing system call
689 * activity on the file. To avoid blocking here for a long
690 * time (the other lwp might be in a long term sleep in its
691 * system call), we scan all other lwps in the process to
692 * find the ones with this fd as one of their active fds,
693 * set their a_stale flag, and set them running if they
694 * are in an interruptible sleep so they will emerge from
695 * their system calls immediately. post_syscall() will
696 * test the a_stale flag and set errno to EBADF.
698 ASSERT(ufp
->uf_refcnt
== 0 || p
->p_lwpcnt
> 1);
699 if (ufp
->uf_refcnt
> 0) {
703 * We call sprlock_proc(p) to ensure that the thread
704 * list will not change while we are scanning it.
705 * To do this, we must drop ufp->uf_lock and then
706 * reacquire it (so we are not holding both p->p_lock
707 * and ufp->uf_lock at the same time). ufp->uf_lock
708 * must be held for is_active_fd() to be correct
709 * (set_active_fd() is called while holding ufp->uf_lock).
711 * This is a convoluted dance, but it is better than
712 * the old brute-force method of stopping every thread
713 * in the process by calling holdlwps(SHOLDFORK1).
719 mutex_enter(&p
->p_lock
);
721 mutex_exit(&p
->p_lock
);
723 UF_ENTER(ufp
, fip
, fd
);
724 ASSERT(ufp
->uf_file
== NULL
);
726 if (ufp
->uf_refcnt
> 0) {
727 for (t
= curthread
->t_forw
;
730 if (is_active_fd(t
, fd
)) {
732 t
->t_activefd
.a_stale
= 1;
743 mutex_enter(&p
->p_lock
);
746 UF_ENTER(ufp
, fip
, fd
);
747 ASSERT(ufp
->uf_file
== NULL
);
751 * Wait for other lwps to stop using this file descriptor.
753 while (ufp
->uf_refcnt
> 0) {
754 cv_wait_stop(&ufp
->uf_closing_cv
, &ufp
->uf_lock
, 250);
756 * cv_wait_stop() drops ufp->uf_lock, so the file list
757 * can change. Drop the lock on our (possibly) stale
758 * ufp and let UF_ENTER() find and lock the current ufp.
761 UF_ENTER(ufp
, fip
, fd
);
766 * catch a watchfd on device's pollhead list but not on fpollinfo list
768 if (ufp
->uf_fpollinfo
!= NULL
)
769 checkwfdlist(fp
->f_vnode
, ufp
->uf_fpollinfo
);
773 * We may need to cleanup some cached poll states in t_pollstate
774 * before the fd can be reused. It is important that we don't
775 * access a stale thread structure. We will do the cleanup in two
776 * phases to avoid deadlock and holding uf_lock for too long.
777 * In phase 1, hold the uf_lock and call pollblockexit() to set
778 * state in t_pollstate struct so that a thread does not exit on
779 * us. In phase 2, we drop the uf_lock and call pollcacheclean().
781 pfd
= ufp
->uf_portfd
;
782 ufp
->uf_portfd
= NULL
;
783 fpip
= ufp
->uf_fpollinfo
;
784 ufp
->uf_fpollinfo
= NULL
;
789 pollcacheclean(fpip
, fd
);
794 * Keep the file descriptor entry reserved across the closef().
800 /* Only return closef() error when closing is all we do */
801 return (newfp
== NULL
? error
: 0);
805 * Decrement uf_refcnt; wakeup anyone waiting to close the file.
810 uf_info_t
*fip
= P_FINFO(curproc
);
813 UF_ENTER(ufp
, fip
, fd
);
814 ASSERT(ufp
->uf_refcnt
> 0);
815 clear_active_fd(fd
); /* clear the active file descriptor */
816 if (--ufp
->uf_refcnt
== 0)
817 cv_broadcast(&ufp
->uf_closing_cv
);
822 * Identical to releasef() but can be called from another process.
825 areleasef(int fd
, uf_info_t
*fip
)
829 UF_ENTER(ufp
, fip
, fd
);
830 ASSERT(ufp
->uf_refcnt
> 0);
831 if (--ufp
->uf_refcnt
== 0)
832 cv_broadcast(&ufp
->uf_closing_cv
);
837 * Duplicate all file descriptors across a fork.
840 flist_fork(uf_info_t
*pfip
, uf_info_t
*cfip
)
843 uf_entry_t
*pufp
, *cufp
;
845 mutex_init(&cfip
->fi_lock
, NULL
, MUTEX_DEFAULT
, NULL
);
846 cfip
->fi_rlist
= NULL
;
849 * We don't need to hold fi_lock because all other lwp's in the
850 * parent have been held.
852 cfip
->fi_nfiles
= nfiles
= flist_minsize(pfip
);
854 cfip
->fi_list
= kmem_zalloc(nfiles
* sizeof (uf_entry_t
), KM_SLEEP
);
856 for (fd
= 0, pufp
= pfip
->fi_list
, cufp
= cfip
->fi_list
; fd
< nfiles
;
857 fd
++, pufp
++, cufp
++) {
858 cufp
->uf_file
= pufp
->uf_file
;
859 cufp
->uf_alloc
= pufp
->uf_alloc
;
860 cufp
->uf_flag
= pufp
->uf_flag
;
861 cufp
->uf_busy
= pufp
->uf_busy
;
862 if (pufp
->uf_file
== NULL
) {
863 ASSERT(pufp
->uf_flag
== 0);
866 * Grab locks to appease ASSERTs in fd_reserve
868 mutex_enter(&cfip
->fi_lock
);
869 mutex_enter(&cufp
->uf_lock
);
870 fd_reserve(cfip
, fd
, -1);
871 mutex_exit(&cufp
->uf_lock
);
872 mutex_exit(&cfip
->fi_lock
);
879 * Close all open file descriptors for the current process.
880 * This is only called from exit(), which is single-threaded,
881 * so we don't need any locking.
884 closeall(uf_info_t
*fip
)
891 for (fd
= 0; fd
< fip
->fi_nfiles
; fd
++, ufp
++) {
892 if ((fp
= ufp
->uf_file
) != NULL
) {
894 if (ufp
->uf_portfd
!= NULL
) {
896 /* remove event port association */
897 pfd
= ufp
->uf_portfd
;
898 ufp
->uf_portfd
= NULL
;
901 ASSERT(ufp
->uf_fpollinfo
== NULL
);
906 kmem_free(fip
->fi_list
, fip
->fi_nfiles
* sizeof (uf_entry_t
));
909 while (fip
->fi_rlist
!= NULL
) {
910 uf_rlist_t
*urp
= fip
->fi_rlist
;
911 fip
->fi_rlist
= urp
->ur_next
;
912 kmem_free(urp
->ur_list
, urp
->ur_nfiles
* sizeof (uf_entry_t
));
913 kmem_free(urp
, sizeof (uf_rlist_t
));
918 * Internal form of close. Decrement reference count on file
919 * structure. Decrement reference count on the vnode following
920 * removal of the referencing file structure.
932 * audit close of file (may be exit)
936 ASSERT(MUTEX_NOT_HELD(&P_FINFO(curproc
)->fi_lock
));
938 mutex_enter(&fp
->f_tlock
);
940 ASSERT(fp
->f_count
> 0);
942 count
= fp
->f_count
--;
944 offset
= fp
->f_offset
;
948 error
= VOP_CLOSE(vp
, flag
, count
, offset
, fp
->f_cred
, NULL
);
951 mutex_exit(&fp
->f_tlock
);
954 ASSERT(fp
->f_count
== 0);
955 mutex_exit(&fp
->f_tlock
);
958 * If DTrace has getf() subroutines active, it will set dtrace_closef
959 * to point to code that implements a barrier with respect to probe
960 * context. This must be called before the file_t is freed (and the
961 * vnode that it refers to is released) -- but it must be after the
962 * file_t has been removed from the uf_entry_t. That is, there must
963 * be no way for a racing getf() in probe context to yield the fp that
964 * we're operating upon.
966 if (dtrace_closef
!= NULL
)
971 * deallocate resources to audit_data
976 kmem_cache_free(file_cache
, fp
);
981 * This is a combination of ufalloc() and setf().
984 ufalloc_file(int start
, file_t
*fp
)
987 uf_info_t
*fip
= P_FINFO(p
);
994 * Assertion is to convince the correctness of the following
995 * assignment for filelimit after casting to int.
997 ASSERT(p
->p_fno_ctl
<= INT_MAX
);
998 filelimit
= (int)p
->p_fno_ctl
;
1001 mutex_enter(&fip
->fi_lock
);
1002 fd
= fd_find(fip
, start
);
1003 if (fd
>= 0 && fd
== fip
->fi_badfd
) {
1005 mutex_exit(&fip
->fi_lock
);
1008 if ((uint_t
)fd
< filelimit
)
1010 if (fd
>= filelimit
) {
1011 mutex_exit(&fip
->fi_lock
);
1012 mutex_enter(&p
->p_lock
);
1013 (void) rctl_action(rctlproc_legacy
[RLIMIT_NOFILE
],
1014 p
->p_rctls
, p
, RCA_SAFE
);
1015 mutex_exit(&p
->p_lock
);
1018 /* fd_find() returned -1 */
1019 nfiles
= fip
->fi_nfiles
;
1020 mutex_exit(&fip
->fi_lock
);
1021 flist_grow(MAX(start
, nfiles
));
1024 UF_ENTER(ufp
, fip
, fd
);
1025 fd_reserve(fip
, fd
, 1);
1026 ASSERT(ufp
->uf_file
== NULL
);
1029 mutex_exit(&fip
->fi_lock
);
1034 * Allocate a user file descriptor greater than or equal to "start".
1039 return (ufalloc_file(start
, NULL
));
1043 * Check that a future allocation of count fds on proc p has a good
1044 * chance of succeeding. If not, do rctl processing as if we'd failed
1047 * Our caller must guarantee that p cannot disappear underneath us.
1050 ufcanalloc(proc_t
*p
, uint_t count
)
1052 uf_info_t
*fip
= P_FINFO(p
);
1059 ASSERT(p
->p_fno_ctl
<= INT_MAX
);
1060 filelimit
= (int)p
->p_fno_ctl
;
1062 mutex_enter(&fip
->fi_lock
);
1063 current
= flist_nalloc(fip
); /* # of in-use descriptors */
1064 mutex_exit(&fip
->fi_lock
);
1067 * If count is a positive integer, the worst that can happen is
1068 * an overflow to a negative value, which is caught by the >= 0 check.
1071 if (count
<= INT_MAX
&& current
>= 0 && current
<= filelimit
)
1074 mutex_enter(&p
->p_lock
);
1075 (void) rctl_action(rctlproc_legacy
[RLIMIT_NOFILE
],
1076 p
->p_rctls
, p
, RCA_SAFE
);
1077 mutex_exit(&p
->p_lock
);
1082 * Allocate a user file descriptor and a file structure.
1083 * Initialize the descriptor to point at the file structure.
1084 * If fdp is NULL, the user file descriptor will not be allocated.
1087 falloc(vnode_t
*vp
, int flag
, file_t
**fpp
, int *fdp
)
1093 if ((fd
= ufalloc(0)) == -1)
1096 fp
= kmem_cache_alloc(file_cache
, KM_SLEEP
);
1098 * Note: falloc returns the fp locked
1100 mutex_enter(&fp
->f_tlock
);
1102 fp
->f_flag
= (ushort_t
)flag
;
1103 fp
->f_flag2
= (flag
& (FSEARCH
|FEXEC
)) >> 16;
1106 fp
->f_audit_data
= 0;
1107 crhold(fp
->f_cred
= CRED());
1109 * allocate resources to audit_data
1121 file_cache_constructor(void *buf
, void *cdrarg
, int kmflags
)
1125 mutex_init(&fp
->f_tlock
, NULL
, MUTEX_DEFAULT
, NULL
);
1131 file_cache_destructor(void *buf
, void *cdrarg
)
1135 mutex_destroy(&fp
->f_tlock
);
1141 file_cache
= kmem_cache_create("file_cache", sizeof (file_t
), 0,
1142 file_cache_constructor
, file_cache_destructor
, NULL
, NULL
, NULL
, 0);
1146 unfalloc(file_t
*fp
)
1148 ASSERT(MUTEX_HELD(&fp
->f_tlock
));
1149 if (--fp
->f_count
<= 0) {
1151 * deallocate resources to audit_data
1156 mutex_exit(&fp
->f_tlock
);
1157 kmem_cache_free(file_cache
, fp
);
1159 mutex_exit(&fp
->f_tlock
);
1163 * Given a file descriptor, set the user's
1164 * file pointer to the given parameter.
1167 setf(int fd
, file_t
*fp
)
1169 uf_info_t
*fip
= P_FINFO(curproc
);
1176 mutex_enter(&fip
->fi_lock
);
1177 UF_ENTER(ufp
, fip
, fd
);
1178 fd_reserve(fip
, fd
, -1);
1179 mutex_exit(&fip
->fi_lock
);
1181 UF_ENTER(ufp
, fip
, fd
);
1182 ASSERT(ufp
->uf_busy
);
1184 ASSERT(ufp
->uf_fpollinfo
== NULL
);
1185 ASSERT(ufp
->uf_flag
== 0);
1187 cv_broadcast(&ufp
->uf_wanted_cv
);
1192 * Given a file descriptor, return the file table flags, plus,
1193 * if this is a socket in asynchronous mode, the FASYNC flag.
1194 * getf() may or may not have been called before calling f_getfl().
1197 f_getfl(int fd
, int *flagp
)
1199 uf_info_t
*fip
= P_FINFO(curproc
);
1204 if ((uint_t
)fd
>= fip
->fi_nfiles
)
1207 UF_ENTER(ufp
, fip
, fd
);
1208 if ((fp
= ufp
->uf_file
) == NULL
)
1211 vnode_t
*vp
= fp
->f_vnode
;
1212 int flag
= fp
->f_flag
| (fp
->f_flag2
<< 16);
1215 * BSD fcntl() FASYNC compatibility.
1217 if (vp
->v_type
== VSOCK
)
1218 flag
|= sock_getfasync(vp
);
1229 * Given a file descriptor, return the user's file flags.
1230 * Force the FD_CLOEXEC flag for writable self-open /proc files.
1231 * getf() may or may not have been called before calling f_getfd_error().
1234 f_getfd_error(int fd
, int *flagp
)
1236 uf_info_t
*fip
= P_FINFO(curproc
);
1242 if ((uint_t
)fd
>= fip
->fi_nfiles
)
1245 UF_ENTER(ufp
, fip
, fd
);
1246 if ((fp
= ufp
->uf_file
) == NULL
)
1249 flag
= ufp
->uf_flag
;
1250 if ((fp
->f_flag
& FWRITE
) && pr_isself(fp
->f_vnode
))
1262 * getf() must have been called before calling f_getfd().
1268 (void) f_getfd_error(fd
, &flag
);
1269 return ((char)flag
);
1273 * Given a file descriptor and file flags, set the user's file flags.
1274 * At present, the only valid flag is FD_CLOEXEC.
1275 * getf() may or may not have been called before calling f_setfd_error().
1278 f_setfd_error(int fd
, int flags
)
1280 uf_info_t
*fip
= P_FINFO(curproc
);
1284 if ((uint_t
)fd
>= fip
->fi_nfiles
)
1287 UF_ENTER(ufp
, fip
, fd
);
1288 if (ufp
->uf_file
== NULL
)
1291 ufp
->uf_flag
= flags
& FD_CLOEXEC
;
1300 f_setfd(int fd
, char flags
)
1302 (void) f_setfd_error(fd
, flags
);
1306 #define BADFD_MAX 255
1309 * Attempt to allocate a file descriptor which is bad and which
1310 * is "poison" to the application. It cannot be closed (except
1311 * on exec), allocated for a different use, etc.
1314 f_badfd(int start
, int *fdp
, int action
)
1318 uf_info_t
*fip
= P_FINFO(curproc
);
1321 /* No restrictions on 64 bit _file */
1322 if (get_udatamodel() != DATAMODEL_ILP32
)
1326 if (start
> BADFD_MAX
|| start
< BADFD_MIN
)
1329 if (action
>= NSIG
|| action
< 0)
1332 mutex_enter(&fip
->fi_lock
);
1333 badfd
= fip
->fi_badfd
;
1334 mutex_exit(&fip
->fi_lock
);
1339 fdr
= ufalloc(start
);
1341 if (fdr
> BADFD_MAX
) {
1348 mutex_enter(&fip
->fi_lock
);
1349 if (fip
->fi_badfd
!= -1) {
1351 mutex_exit(&fip
->fi_lock
);
1355 fip
->fi_action
= action
;
1356 fip
->fi_badfd
= fdr
;
1357 mutex_exit(&fip
->fi_lock
);
1366 * Allocate a file descriptor and assign it to the vnode "*vpp",
1367 * performing the usual open protocol upon it and returning the
1368 * file descriptor allocated. It is the responsibility of the
1369 * caller to dispose of "*vpp" if any error occurs.
1372 fassign(vnode_t
**vpp
, int mode
, int *fdp
)
1378 if (error
= falloc((vnode_t
*)NULL
, mode
, &fp
, &fd
))
1380 if (error
= VOP_OPEN(vpp
, mode
, fp
->f_cred
, NULL
)) {
1386 mutex_exit(&fp
->f_tlock
);
1388 * Fill in the slot falloc reserved.
1396 * When a process forks it must increment the f_count of all file pointers
1397 * since there is a new process pointing at them. fcnt_add(fip, 1) does this.
1398 * Since we are called when there is only 1 active lwp we don't need to
1399 * hold fi_lock or any uf_lock. If the fork fails, fork_fail() calls
1400 * fcnt_add(fip, -1) to restore the counts.
1403 fcnt_add(uf_info_t
*fip
, int incr
)
1410 for (i
= 0; i
< fip
->fi_nfiles
; i
++, ufp
++) {
1411 if ((fp
= ufp
->uf_file
) != NULL
) {
1412 mutex_enter(&fp
->f_tlock
);
1413 ASSERT((incr
== 1 && fp
->f_count
>= 1) ||
1414 (incr
== -1 && fp
->f_count
>= 2));
1415 fp
->f_count
+= incr
;
1416 mutex_exit(&fp
->f_tlock
);
1422 * This is called from exec to close all fd's that have the FD_CLOEXEC flag
1423 * set and also to close all self-open for write /proc file descriptors.
1426 close_exec(uf_info_t
*fip
)
1435 for (fd
= 0; fd
< fip
->fi_nfiles
; fd
++, ufp
++) {
1436 if ((fp
= ufp
->uf_file
) != NULL
&&
1437 ((ufp
->uf_flag
& FD_CLOEXEC
) ||
1438 ((fp
->f_flag
& FWRITE
) && pr_isself(fp
->f_vnode
)))) {
1439 fpip
= ufp
->uf_fpollinfo
;
1440 mutex_enter(&fip
->fi_lock
);
1441 mutex_enter(&ufp
->uf_lock
);
1442 fd_reserve(fip
, fd
, -1);
1443 mutex_exit(&fip
->fi_lock
);
1444 ufp
->uf_file
= NULL
;
1445 ufp
->uf_fpollinfo
= NULL
;
1448 * We may need to cleanup some cached poll states
1449 * in t_pollstate before the fd can be reused. It
1450 * is important that we don't access a stale thread
1451 * structure. We will do the cleanup in two
1452 * phases to avoid deadlock and holding uf_lock for
1453 * too long. In phase 1, hold the uf_lock and call
1454 * pollblockexit() to set state in t_pollstate struct
1455 * so that a thread does not exit on us. In phase 2,
1456 * we drop the uf_lock and call pollcacheclean().
1458 pfd
= ufp
->uf_portfd
;
1459 ufp
->uf_portfd
= NULL
;
1461 pollblockexit(fpip
);
1462 mutex_exit(&ufp
->uf_lock
);
1464 pollcacheclean(fpip
, fd
);
1473 fip
->fi_action
= -1;
1477 * Utility function called by most of the *at() system call interfaces.
1479 * Generate a starting vnode pointer for an (fd, path) pair where 'fd'
1480 * is an open file descriptor for a directory to be used as the starting
1481 * point for the lookup of the relative pathname 'path' (or, if path is
1482 * NULL, generate a vnode pointer for the direct target of the operation).
1484 * If we successfully return a non-NULL startvp, it has been the target
1485 * of VN_HOLD() and the caller must call VN_RELE() on it.
1488 fgetstartvp(int fd
, char *path
, vnode_t
**startvpp
)
1494 if (fd
== AT_FDCWD
&& path
== NULL
)
1497 if (fd
== AT_FDCWD
) {
1499 * Start from the current working directory.
1505 else if (copyin(path
, &startchar
, sizeof (char)))
1508 if (startchar
== '/') {
1510 * 'path' is an absolute pathname.
1515 * 'path' is a relative pathname or we will
1516 * be applying the operation to 'fd' itself.
1518 if ((startfp
= getf(fd
)) == NULL
)
1520 startvp
= startfp
->f_vnode
;
1525 *startvpp
= startvp
;
1530 * Called from fchownat() and fchmodat() to set ownership and mode.
1531 * The contents of *vap must be set before calling here.
1534 fsetattrat(int fd
, char *path
, int flags
, struct vattr
*vap
)
1541 * Since we are never called to set the size of a file, we don't
1542 * need to check for non-blocking locks (via nbl_need_check(vp)).
1544 ASSERT(!(vap
->va_mask
& AT_SIZE
));
1546 if ((error
= fgetstartvp(fd
, path
, &startvp
)) != 0)
1548 if (AU_AUDITING() && startvp
!= NULL
)
1549 audit_setfsat_path(1);
1552 * Do lookup for fchownat/fchmodat when path not NULL
1555 if (error
= lookupnameat(path
, UIO_USERSPACE
,
1556 (flags
== AT_SYMLINK_NOFOLLOW
) ?
1558 NULLVPP
, &vp
, startvp
)) {
1559 if (startvp
!= NULL
)
1569 if (vn_is_readonly(vp
)) {
1572 error
= VOP_SETATTR(vp
, vap
, 0, CRED(), NULL
);
1575 if (startvp
!= NULL
)
1583 * Return true if the given vnode is referenced by any
1584 * entry in the current process's file descriptor table.
1587 fisopen(vnode_t
*vp
)
1592 uf_info_t
*fip
= P_FINFO(curproc
);
1595 mutex_enter(&fip
->fi_lock
);
1596 for (fd
= 0; fd
< fip
->fi_nfiles
; fd
++) {
1597 UF_ENTER(ufp
, fip
, fd
);
1598 if ((fp
= ufp
->uf_file
) != NULL
&&
1599 (ovp
= fp
->f_vnode
) != NULL
&& VN_CMP(vp
, ovp
)) {
1601 mutex_exit(&fip
->fi_lock
);
1606 mutex_exit(&fip
->fi_lock
);
1611 * Return zero if at least one file currently open (by curproc) shouldn't be
1612 * allowed to change zones.
1615 files_can_change_zones(void)
1619 uf_info_t
*fip
= P_FINFO(curproc
);
1622 mutex_enter(&fip
->fi_lock
);
1623 for (fd
= 0; fd
< fip
->fi_nfiles
; fd
++) {
1624 UF_ENTER(ufp
, fip
, fd
);
1625 if ((fp
= ufp
->uf_file
) != NULL
&&
1626 !vn_can_change_zones(fp
->f_vnode
)) {
1628 mutex_exit(&fip
->fi_lock
);
1633 mutex_exit(&fip
->fi_lock
);
1640 * The following functions are only used in ASSERT()s elsewhere.
1641 * They do not modify the state of the system.
1645 * Return true (1) if the current thread is in the fpollinfo
1646 * list for this file descriptor, else false (0).
1649 curthread_in_plist(uf_entry_t
*ufp
)
1653 ASSERT(MUTEX_HELD(&ufp
->uf_lock
));
1654 for (fpip
= ufp
->uf_fpollinfo
; fpip
; fpip
= fpip
->fp_next
)
1655 if (fpip
->fp_thread
== curthread
)
1661 * Sanity check to make sure that after lwp_exit(),
1662 * curthread does not appear on any fd's fpollinfo list.
1665 checkfpollinfo(void)
1668 uf_info_t
*fip
= P_FINFO(curproc
);
1671 mutex_enter(&fip
->fi_lock
);
1672 for (fd
= 0; fd
< fip
->fi_nfiles
; fd
++) {
1673 UF_ENTER(ufp
, fip
, fd
);
1674 ASSERT(!curthread_in_plist(ufp
));
1677 mutex_exit(&fip
->fi_lock
);
1681 * Return true (1) if the current thread is in the fpollinfo
1682 * list for this file descriptor, else false (0).
1683 * This is the same as curthread_in_plist(),
1684 * but is called w/o holding uf_lock.
1689 uf_info_t
*fip
= P_FINFO(curproc
);
1693 UF_ENTER(ufp
, fip
, fd
);
1694 rc
= curthread_in_plist(ufp
);
1702 * Add the curthread to fpollinfo list, meaning this fd is currently in the
1703 * thread's poll cache. Each lwp polling this file descriptor should call
1704 * this routine once.
1707 addfpollinfo(int fd
)
1709 struct uf_entry
*ufp
;
1711 uf_info_t
*fip
= P_FINFO(curproc
);
1713 fpip
= kmem_zalloc(sizeof (fpollinfo_t
), KM_SLEEP
);
1714 fpip
->fp_thread
= curthread
;
1715 UF_ENTER(ufp
, fip
, fd
);
1717 * Assert we are not already on the list, that is, that
1718 * this lwp did not call addfpollinfo twice for the same fd.
1720 ASSERT(!curthread_in_plist(ufp
));
1722 * addfpollinfo is always done inside the getf/releasef pair.
1724 ASSERT(ufp
->uf_refcnt
>= 1);
1725 fpip
->fp_next
= ufp
->uf_fpollinfo
;
1726 ufp
->uf_fpollinfo
= fpip
;
1731 * Delete curthread from fpollinfo list if it is there.
1734 delfpollinfo(int fd
)
1736 struct uf_entry
*ufp
;
1737 struct fpollinfo
*fpip
;
1738 struct fpollinfo
**fpipp
;
1739 uf_info_t
*fip
= P_FINFO(curproc
);
1741 UF_ENTER(ufp
, fip
, fd
);
1742 for (fpipp
= &ufp
->uf_fpollinfo
;
1743 (fpip
= *fpipp
) != NULL
;
1744 fpipp
= &fpip
->fp_next
) {
1745 if (fpip
->fp_thread
== curthread
) {
1746 *fpipp
= fpip
->fp_next
;
1747 kmem_free(fpip
, sizeof (fpollinfo_t
));
1752 * Assert that we are not still on the list, that is, that
1753 * this lwp did not call addfpollinfo twice for the same fd.
1755 ASSERT(!curthread_in_plist(ufp
));
1760 * fd is associated with a port. pfd is a pointer to the fd entry in the
1761 * cache of the port.
1765 addfd_port(int fd
, portfd_t
*pfd
)
1767 struct uf_entry
*ufp
;
1768 uf_info_t
*fip
= P_FINFO(curproc
);
1770 UF_ENTER(ufp
, fip
, fd
);
1772 * addfd_port is always done inside the getf/releasef pair.
1774 ASSERT(ufp
->uf_refcnt
>= 1);
1775 if (ufp
->uf_portfd
== NULL
) {
1777 ufp
->uf_portfd
= pfd
;
1778 pfd
->pfd_next
= NULL
;
1780 pfd
->pfd_next
= ufp
->uf_portfd
;
1781 ufp
->uf_portfd
= pfd
;
1782 pfd
->pfd_next
->pfd_prev
= pfd
;
1788 delfd_port(int fd
, portfd_t
*pfd
)
1790 struct uf_entry
*ufp
;
1791 uf_info_t
*fip
= P_FINFO(curproc
);
1793 UF_ENTER(ufp
, fip
, fd
);
1795 * delfd_port is always done inside the getf/releasef pair.
1797 ASSERT(ufp
->uf_refcnt
>= 1);
1798 if (ufp
->uf_portfd
== pfd
) {
1799 /* remove first entry */
1800 ufp
->uf_portfd
= pfd
->pfd_next
;
1802 pfd
->pfd_prev
->pfd_next
= pfd
->pfd_next
;
1803 if (pfd
->pfd_next
!= NULL
)
1804 pfd
->pfd_next
->pfd_prev
= pfd
->pfd_prev
;
1810 port_close_fd(portfd_t
*pfd
)
1815 * At this point, no other thread should access
1816 * the portfd_t list for this fd. The uf_file, uf_portfd
1817 * pointers in the uf_entry_t struct for this fd would
1820 for (; pfd
!= NULL
; pfd
= pfdn
) {
1821 pfdn
= pfd
->pfd_next
;
1822 port_close_pfd(pfd
);