ficl-sys is not wsdiff clean

[unleashed.git] / include / sys / cpuvar.h

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2012 by Delphix. All rights reserved.
 * Copyright 2014 Igor Kozhukhov <ikozhukhov@gmail.com>.
 */

#ifndef _SYS_CPUVAR_H
#define _SYS_CPUVAR_H

#include <sys/thread.h>
#include <sys/sysinfo.h>        /* has cpu_stat_t definition */
#include <sys/disp.h>
#include <sys/processor.h>

#include <sys/loadavg.h>
#if (defined(_KERNEL) || defined(_KMEMUSER)) && defined(_MACHDEP)
#include <sys/machcpuvar.h>
#endif

#include <sys/types.h>
#include <sys/file.h>
#include <sys/bitmap.h>
#include <sys/rwlock.h>
#include <sys/msacct.h>
#if defined(__GNUC__) && defined(_ASM_INLINES) && defined(_KERNEL) && \
        (defined(__i386) || defined(__amd64))
#include <asm/cpuvar.h>
#endif

#ifdef  __cplusplus
extern "C" {
#endif

struct squeue_set_s;

#define CPU_CACHE_COHERENCE_SIZE        64

/*
 * For fast event tracing.
 */
struct ftrace_record;
typedef struct ftrace_data {
        int                     ftd_state;      /* ftrace flags */
        kmutex_t                ftd_unused;     /* ftrace buffer lock, unused */
        struct ftrace_record    *ftd_cur;       /* current record */
        struct ftrace_record    *ftd_first;     /* first record */
        struct ftrace_record    *ftd_last;      /* last record */
} ftrace_data_t;

struct cyc_cpu;
struct nvlist;

/*
 * Per-CPU data.
 *
 * Be careful adding new members: if they are not the same in all modules (e.g.
 * change size depending on a #define), CTF uniquification can fail to work
 * properly.  Furthermore, this is transitive in that it applies recursively to
 * all types pointed to by cpu_t.
 */
typedef struct cpu {
        processorid_t   cpu_id;                 /* CPU number */
        processorid_t   cpu_seqid;      /* sequential CPU id (0..ncpus-1) */
        volatile cpu_flag_t cpu_flags;          /* flags indicating CPU state */
        struct cpu      *cpu_self;              /* pointer to itself */
        kthread_t       *cpu_thread;            /* current thread */
        kthread_t       *cpu_idle_thread;       /* idle thread for this CPU */
        kthread_t       *cpu_pause_thread;      /* pause thread for this CPU */
        klwp_id_t       cpu_lwp;                /* current lwp (if any) */
        klwp_id_t       cpu_fpowner;            /* currently loaded fpu owner */
        struct cpupart  *cpu_part;              /* partition with this CPU */
        struct lgrp_ld  *cpu_lpl;               /* pointer to this cpu's load */
        int             cpu_cache_offset;       /* see kmem.c for details */

        /*
         * Links to other CPUs.  It is safe to walk these lists if
         * one of the following is true:
         *      - cpu_lock held
         *      - preemption disabled via kpreempt_disable
         *      - PIL >= DISP_LEVEL
         *      - acting thread is an interrupt thread
         *      - all other CPUs are paused
         */
        struct cpu      *cpu_next;              /* next existing CPU */
        struct cpu      *cpu_prev;              /* prev existing CPU */
        struct cpu      *cpu_next_onln;         /* next online (enabled) CPU */
        struct cpu      *cpu_prev_onln;         /* prev online (enabled) CPU */
        struct cpu      *cpu_next_part;         /* next CPU in partition */
        struct cpu      *cpu_prev_part;         /* prev CPU in partition */
        struct cpu      *cpu_next_lgrp;         /* next CPU in latency group */
        struct cpu      *cpu_prev_lgrp;         /* prev CPU in latency group */
        struct cpu      *cpu_next_lpl;          /* next CPU in lgrp partition */
        struct cpu      *cpu_prev_lpl;

        struct cpu_pg   *cpu_pg;                /* cpu's processor groups */

        void            *cpu_reserved[4];       /* reserved for future use */

        /*
         * Scheduling variables.
         */
        disp_t          *cpu_disp;              /* dispatch queue data */
        /*
         * Note that cpu_disp is set before the CPU is added to the system
         * and is never modified.  Hence, no additional locking is needed
         * beyond what's necessary to access the cpu_t structure.
         */
        char            cpu_runrun;     /* scheduling flag - set to preempt */
        char            cpu_kprunrun;           /* force kernel preemption */
        pri_t           cpu_chosen_level;       /* priority at which cpu */
                                                /* was chosen for scheduling */
        kthread_t       *cpu_dispthread; /* thread selected for dispatch */
        disp_lock_t     cpu_thread_lock; /* dispatcher lock on current thread */
        uint8_t         cpu_disp_flags; /* flags used by dispatcher */
        /*
         * The following field is updated when ever the cpu_dispthread
         * changes. Also in places, where the current thread(cpu_dispthread)
         * priority changes. This is used in disp_lowpri_cpu()
         */
        pri_t           cpu_dispatch_pri; /* priority of cpu_dispthread */
        clock_t         cpu_last_swtch; /* last time switched to new thread */

        /*
         * Interrupt data.
         */
        caddr_t         cpu_intr_stack; /* interrupt stack */
        kthread_t       *cpu_intr_thread; /* interrupt thread list */
        uint_t          cpu_intr_actv;  /* interrupt levels active (bitmask) */
        int             cpu_base_spl;   /* priority for highest rupt active */

        /*
         * Statistics.
         */
        cpu_stats_t     cpu_stats;              /* per-CPU statistics */
        struct kstat    *cpu_info_kstat;        /* kstat for cpu info */

        uintptr_t       cpu_profile_pc; /* kernel PC in profile interrupt */
        uintptr_t       cpu_profile_upc; /* user PC in profile interrupt */
        uintptr_t       cpu_profile_pil; /* PIL when profile interrupted */

        ftrace_data_t   cpu_ftrace;             /* per cpu ftrace data */

        clock_t         cpu_deadman_counter;    /* used by deadman() */
        uint_t          cpu_deadman_countdown;  /* used by deadman() */

        kmutex_t        cpu_cpc_ctxlock; /* protects context for idle thread */
        kcpc_ctx_t      *cpu_cpc_ctx;   /* performance counter context */

        /*
         * Configuration information for the processor_info system call.
         */
        processor_info_t cpu_type_info; /* config info */
        time_t          cpu_state_begin; /* when CPU entered current state */
        char            cpu_cpr_flags;  /* CPR related info */
        struct cyc_cpu  *cpu_cyclic;    /* per cpu cyclic subsystem data */
        struct squeue_set_s *cpu_squeue_set;    /* per cpu squeue set */
        struct nvlist   *cpu_props;     /* pool-related properties */

        krwlock_t       cpu_ft_lock;            /* DTrace: fasttrap lock */
        uintptr_t       cpu_dtrace_caller;      /* DTrace: caller, if any */
        hrtime_t        cpu_dtrace_chillmark;   /* DTrace: chill mark time */
        hrtime_t        cpu_dtrace_chilled;     /* DTrace: total chill time */
        uint64_t        cpu_dtrace_probes;      /* DTrace: total probes fired */
        hrtime_t        cpu_dtrace_nsec;        /* DTrace: ns in dtrace_probe */

        volatile uint16_t cpu_mstate;           /* cpu microstate */
        volatile uint16_t cpu_mstate_gen;       /* generation counter */
        volatile hrtime_t cpu_mstate_start;     /* cpu microstate start time */
        volatile hrtime_t cpu_acct[NCMSTATES];  /* cpu microstate data */
        hrtime_t        cpu_intracct[NCMSTATES]; /* interrupt mstate data */
        hrtime_t        cpu_waitrq;             /* cpu run-queue wait time */
        struct loadavg_s cpu_loadavg;           /* loadavg info for this cpu */

        char            *cpu_idstr;     /* for printing and debugging */
        char            *cpu_brandstr;  /* for printing */

        /*
         * Sum of all device interrupt weights that are currently directed at
         * this cpu. Cleared at start of interrupt redistribution.
         */
        int32_t         cpu_intr_weight;
        void            *cpu_vm_data;

        struct cpu_physid *cpu_physid;  /* physical associations */

        uint64_t        cpu_curr_clock;         /* current clock freq in Hz */
        char            *cpu_supp_freqs;        /* supported freqs in Hz */

        uintptr_t       cpu_cpcprofile_pc;      /* kernel PC in cpc interrupt */
        uintptr_t       cpu_cpcprofile_upc;     /* user PC in cpc interrupt */

        /*
         * Interrupt load factor used by dispatcher & softcall
         */
        hrtime_t        cpu_intrlast;   /* total interrupt time (nsec) */
        int             cpu_intrload;   /* interrupt load factor (0-99%) */

        uint_t          cpu_rotor;      /* for cheap pseudo-random numbers */

        struct cu_cpu_info      *cpu_cu_info;   /* capacity & util. info */

        /*
         * cpu_generation is updated whenever CPU goes on-line or off-line.
         * Updates to cpu_generation are protected by cpu_lock.
         *
         * See CPU_NEW_GENERATION() macro below.
         */
        volatile uint_t         cpu_generation; /* tracking on/off-line */

        /*
         * New members must be added /before/ this member, as the CTF tools
         * rely on this being the last field before cpu_m, so they can
         * correctly calculate the offset when synthetically adding the cpu_m
         * member in objects that do not have it.  This fixup is required for
         * uniquification to work correctly.
         */
        uintptr_t       cpu_m_pad;

#if (defined(_KERNEL) || defined(_KMEMUSER)) && defined(_MACHDEP)
        struct machcpu  cpu_m;          /* per architecture info */
#endif
} cpu_t;

/*
 * The cpu_core structure consists of per-CPU state available in any context.
 * On some architectures, this may mean that the page(s) containing the
 * NCPU-sized array of cpu_core structures must be locked in the TLB -- it
 * is up to the platform to assure that this is performed properly.  Note that
 * the structure is sized to avoid false sharing.
 */
#define CPUC_SIZE               (sizeof (uint16_t) + sizeof (uint8_t) + \
                                sizeof (uintptr_t) + sizeof (kmutex_t))
#define CPUC_PADSIZE            CPU_CACHE_COHERENCE_SIZE - CPUC_SIZE

typedef struct cpu_core {
        uint16_t        cpuc_dtrace_flags;      /* DTrace flags */
        uint8_t         cpuc_dcpc_intr_state;   /* DCPC provider intr state */
        uint8_t         cpuc_pad[CPUC_PADSIZE]; /* padding */
        uintptr_t       cpuc_dtrace_illval;     /* DTrace illegal value */
        kmutex_t        cpuc_pid_lock;          /* DTrace pid provider lock */
} cpu_core_t;

#ifdef _KERNEL
extern cpu_core_t cpu_core[];
#endif /* _KERNEL */

/*
 * CPU_ON_INTR() macro. Returns non-zero if currently on interrupt stack.
 * Note that this isn't a test for a high PIL.  For example, cpu_intr_actv
 * does not get updated when we go through sys_trap from TL>0 at high PIL.
 * getpil() should be used instead to check for PIL levels.
 */
#define CPU_ON_INTR(cpup) ((cpup)->cpu_intr_actv >> (LOCK_LEVEL + 1))

/*
 * Check to see if an interrupt thread might be active at a given ipl.
 * If so return true.
 * We must be conservative--it is ok to give a false yes, but a false no
 * will cause disaster.  (But if the situation changes after we check it is
 * ok--the caller is trying to ensure that an interrupt routine has been
 * exited).
 * This is used when trying to remove an interrupt handler from an autovector
 * list in avintr.c.
 */
#define INTR_ACTIVE(cpup, level)        \
        ((level) <= LOCK_LEVEL ?        \
        ((cpup)->cpu_intr_actv & (1 << (level))) : (CPU_ON_INTR(cpup)))

/*
 * CPU_PSEUDO_RANDOM() returns a per CPU value that changes each time one
 * looks at it. It's meant as a cheap mechanism to be incorporated in routines
 * wanting to avoid biasing, but where true randomness isn't needed (just
 * something that changes).
 */
#define CPU_PSEUDO_RANDOM() (CPU->cpu_rotor++)

#if defined(_KERNEL) || defined(_KMEMUSER) || defined(_BOOT)

#define INTR_STACK_SIZE MAX(DEFAULTSTKSZ, PAGESIZE)

/* MEMBERS PROTECTED BY "atomicity": cpu_flags */

/*
 * Flags in the CPU structure.
 *
 * These are protected by cpu_lock (except during creation).
 *
 * Offlined-CPUs have three stages of being offline:
 *
 * CPU_ENABLE indicates that the CPU is participating in I/O interrupts
 * that can be directed at a number of different CPUs.  If CPU_ENABLE
 * is off, the CPU will not be given interrupts that can be sent elsewhere,
 * but will still get interrupts from devices associated with that CPU only,
 * and from other CPUs.
 *
 * CPU_OFFLINE indicates that the dispatcher should not allow any threads
 * other than interrupt threads to run on that CPU.  A CPU will not have
 * CPU_OFFLINE set if there are any bound threads (besides interrupts).
 *
 * CPU_QUIESCED is set if p_offline was able to completely turn idle the
 * CPU and it will not have to run interrupt threads.  In this case it'll
 * stay in the idle loop until CPU_QUIESCED is turned off.
 *
 * CPU_FROZEN is used only by CPR to mark CPUs that have been successfully
 * suspended (in the suspend path), or have yet to be resumed (in the resume
 * case).
 *
 * On some platforms CPUs can be individually powered off.
 * The following flags are set for powered off CPUs: CPU_QUIESCED,
 * CPU_OFFLINE, and CPU_POWEROFF.  The following flags are cleared:
 * CPU_RUNNING, CPU_READY, CPU_EXISTS, and CPU_ENABLE.
 */
#define CPU_RUNNING     0x001           /* CPU running */
#define CPU_READY       0x002           /* CPU ready for cross-calls */
#define CPU_QUIESCED    0x004           /* CPU will stay in idle */
#define CPU_EXISTS      0x008           /* CPU is configured */
#define CPU_ENABLE      0x010           /* CPU enabled for interrupts */
#define CPU_OFFLINE     0x020           /* CPU offline via p_online */
#define CPU_POWEROFF    0x040           /* CPU is powered off */
#define CPU_FROZEN      0x080           /* CPU is frozen via CPR suspend */
#define CPU_SPARE       0x100           /* CPU offline available for use */
#define CPU_FAULTED     0x200           /* CPU offline diagnosed faulty */

#define FMT_CPU_FLAGS                                                   \
        "\20\12fault\11spare\10frozen"                                  \
        "\7poweroff\6offline\5enable\4exist\3quiesced\2ready\1run"

#define CPU_ACTIVE(cpu) (((cpu)->cpu_flags & CPU_OFFLINE) == 0)

/*
 * Flags for cpu_offline(), cpu_faulted(), and cpu_spare().
 */
#define CPU_FORCED      0x0001          /* Force CPU offline */

/*
 * DTrace flags.
 */
#define CPU_DTRACE_NOFAULT      0x0001  /* Don't fault */
#define CPU_DTRACE_DROP         0x0002  /* Drop this ECB */
#define CPU_DTRACE_BADADDR      0x0004  /* DTrace fault: bad address */
#define CPU_DTRACE_BADALIGN     0x0008  /* DTrace fault: bad alignment */
#define CPU_DTRACE_DIVZERO      0x0010  /* DTrace fault: divide by zero */
#define CPU_DTRACE_ILLOP        0x0020  /* DTrace fault: illegal operation */
#define CPU_DTRACE_NOSCRATCH    0x0040  /* DTrace fault: out of scratch */
#define CPU_DTRACE_KPRIV        0x0080  /* DTrace fault: bad kernel access */
#define CPU_DTRACE_UPRIV        0x0100  /* DTrace fault: bad user access */
#define CPU_DTRACE_TUPOFLOW     0x0200  /* DTrace fault: tuple stack overflow */
#if defined(__sparc)
#define CPU_DTRACE_FAKERESTORE  0x0400  /* pid provider hint to getreg */
#endif
#define CPU_DTRACE_ENTRY        0x0800  /* pid provider hint to ustack() */
#define CPU_DTRACE_BADSTACK     0x1000  /* DTrace fault: bad stack */

#define CPU_DTRACE_FAULT        (CPU_DTRACE_BADADDR | CPU_DTRACE_BADALIGN | \
                                CPU_DTRACE_DIVZERO | CPU_DTRACE_ILLOP | \
                                CPU_DTRACE_NOSCRATCH | CPU_DTRACE_KPRIV | \
                                CPU_DTRACE_UPRIV | CPU_DTRACE_TUPOFLOW | \
                                CPU_DTRACE_BADSTACK)
#define CPU_DTRACE_ERROR        (CPU_DTRACE_FAULT | CPU_DTRACE_DROP)

/*
 * Dispatcher flags
 * These flags must be changed only by the current CPU.
 */
#define CPU_DISP_DONTSTEAL      0x01    /* CPU undergoing context swtch */
#define CPU_DISP_HALTED         0x02    /* CPU halted waiting for interrupt */

/* Note: inside ifdef: _KERNEL || _KMEMUSER || _BOOT */
#if defined(_MACHDEP)

/*
 * Macros for manipulating sets of CPUs as a bitmap.  Note that this
 * bitmap may vary in size depending on the maximum CPU id a specific
 * platform supports.  This may be different than the number of CPUs
 * the platform supports, since CPU ids can be sparse.  We define two
 * sets of macros; one for platforms where the maximum CPU id is less
 * than the number of bits in a single word (32 in a 32-bit kernel,
 * 64 in a 64-bit kernel), and one for platforms that require bitmaps
 * of more than one word.
 */

#define CPUSET_WORDS    BT_BITOUL(NCPU)
#define CPUSET_NOTINSET ((uint_t)-1)

#if     CPUSET_WORDS > 1

typedef struct cpuset {
        ulong_t cpub[CPUSET_WORDS];
} cpuset_t;

/*
 * Private functions for manipulating cpusets that do not fit in a
 * single word.  These should not be used directly; instead the
 * CPUSET_* macros should be used so the code will be portable
 * across different definitions of NCPU.
 */
extern  void    cpuset_all(cpuset_t *);
extern  void    cpuset_all_but(cpuset_t *, uint_t);
extern  int     cpuset_isnull(cpuset_t *);
extern  int     cpuset_cmp(cpuset_t *, cpuset_t *);
extern  void    cpuset_only(cpuset_t *, uint_t);
extern  uint_t  cpuset_find(cpuset_t *);
extern  void    cpuset_bounds(cpuset_t *, uint_t *, uint_t *);

#define CPUSET_ALL(set)                 cpuset_all(&(set))
#define CPUSET_ALL_BUT(set, cpu)        cpuset_all_but(&(set), cpu)
#define CPUSET_ONLY(set, cpu)           cpuset_only(&(set), cpu)
#define CPU_IN_SET(set, cpu)            BT_TEST((set).cpub, cpu)
#define CPUSET_ADD(set, cpu)            BT_SET((set).cpub, cpu)
#define CPUSET_DEL(set, cpu)            BT_CLEAR((set).cpub, cpu)
#define CPUSET_ISNULL(set)              cpuset_isnull(&(set))
#define CPUSET_ISEQUAL(set1, set2)      cpuset_cmp(&(set1), &(set2))

/*
 * Find one CPU in the cpuset.
 * Sets "cpu" to the id of the found CPU, or CPUSET_NOTINSET if no cpu
 * could be found. (i.e. empty set)
 */
#define CPUSET_FIND(set, cpu)           {               \
        cpu = cpuset_find(&(set));                      \
}

/*
 * Determine the smallest and largest CPU id in the set. Returns
 * CPUSET_NOTINSET in smallest and largest when set is empty.
 */
#define CPUSET_BOUNDS(set, smallest, largest)   {               \
        cpuset_bounds(&(set), &(smallest), &(largest));         \
}

/*
 * Atomic cpuset operations
 * These are safe to use for concurrent cpuset manipulations.
 * "xdel" and "xadd" are exclusive operations, that set "result" to "0"
 * if the add or del was successful, or "-1" if not successful.
 * (e.g. attempting to add a cpu to a cpuset that's already there, or
 * deleting a cpu that's not in the cpuset)
 */

#define CPUSET_ATOMIC_DEL(set, cpu)     BT_ATOMIC_CLEAR((set).cpub, (cpu))
#define CPUSET_ATOMIC_ADD(set, cpu)     BT_ATOMIC_SET((set).cpub, (cpu))

#define CPUSET_ATOMIC_XADD(set, cpu, result) \
        BT_ATOMIC_SET_EXCL((set).cpub, cpu, result)

#define CPUSET_ATOMIC_XDEL(set, cpu, result) \
        BT_ATOMIC_CLEAR_EXCL((set).cpub, cpu, result)


#define CPUSET_OR(set1, set2)           {               \
        int _i;                                         \
        for (_i = 0; _i < CPUSET_WORDS; _i++)           \
                (set1).cpub[_i] |= (set2).cpub[_i];     \
}

#define CPUSET_XOR(set1, set2)          {               \
        int _i;                                         \
        for (_i = 0; _i < CPUSET_WORDS; _i++)           \
                (set1).cpub[_i] ^= (set2).cpub[_i];     \
}

#define CPUSET_AND(set1, set2)          {               \
        int _i;                                         \
        for (_i = 0; _i < CPUSET_WORDS; _i++)           \
                (set1).cpub[_i] &= (set2).cpub[_i];     \
}

#define CPUSET_ZERO(set)                {               \
        int _i;                                         \
        for (_i = 0; _i < CPUSET_WORDS; _i++)           \
                (set).cpub[_i] = 0;                     \
}

#elif   CPUSET_WORDS == 1

typedef ulong_t cpuset_t;       /* a set of CPUs */

#define CPUSET(cpu)                     (1UL << (cpu))

#define CPUSET_ALL(set)                 ((void)((set) = ~0UL))
#define CPUSET_ALL_BUT(set, cpu)        ((void)((set) = ~CPUSET(cpu)))
#define CPUSET_ONLY(set, cpu)           ((void)((set) = CPUSET(cpu)))
#define CPU_IN_SET(set, cpu)            ((set) & CPUSET(cpu))
#define CPUSET_ADD(set, cpu)            ((void)((set) |= CPUSET(cpu)))
#define CPUSET_DEL(set, cpu)            ((void)((set) &= ~CPUSET(cpu)))
#define CPUSET_ISNULL(set)              ((set) == 0)
#define CPUSET_ISEQUAL(set1, set2)      ((set1) == (set2))
#define CPUSET_OR(set1, set2)           ((void)((set1) |= (set2)))
#define CPUSET_XOR(set1, set2)          ((void)((set1) ^= (set2)))
#define CPUSET_AND(set1, set2)          ((void)((set1) &= (set2)))
#define CPUSET_ZERO(set)                ((void)((set) = 0))

#define CPUSET_FIND(set, cpu)           {               \
        cpu = (uint_t)(lowbit(set) - 1);                                \
}

#define CPUSET_BOUNDS(set, smallest, largest)   {       \
        smallest = (uint_t)(lowbit(set) - 1);           \
        largest = (uint_t)(highbit(set) - 1);           \
}

#define CPUSET_ATOMIC_DEL(set, cpu)     atomic_and_ulong(&(set), ~CPUSET(cpu))
#define CPUSET_ATOMIC_ADD(set, cpu)     atomic_or_ulong(&(set), CPUSET(cpu))

#define CPUSET_ATOMIC_XADD(set, cpu, result) \
        { result = atomic_set_long_excl(&(set), (cpu)); }

#define CPUSET_ATOMIC_XDEL(set, cpu, result) \
        { result = atomic_clear_long_excl(&(set), (cpu)); }

#else   /* CPUSET_WORDS <= 0 */

#error NCPU is undefined or invalid

#endif  /* CPUSET_WORDS */

extern cpuset_t cpu_seqid_inuse;

#endif  /* _MACHDEP */
#endif /* _KERNEL || _KMEMUSER || _BOOT */

#define CPU_CPR_OFFLINE         0x0
#define CPU_CPR_ONLINE          0x1
#define CPU_CPR_IS_OFFLINE(cpu) (((cpu)->cpu_cpr_flags & CPU_CPR_ONLINE) == 0)
#define CPU_CPR_IS_ONLINE(cpu)  ((cpu)->cpu_cpr_flags & CPU_CPR_ONLINE)
#define CPU_SET_CPR_FLAGS(cpu, flag)    ((cpu)->cpu_cpr_flags |= flag)

#if defined(_KERNEL) || defined(_KMEMUSER)

extern struct cpu       *cpu[];         /* indexed by CPU number */
extern struct cpu       **cpu_seq;      /* indexed by sequential CPU id */
extern cpu_t            *cpu_list;      /* list of CPUs */
extern cpu_t            *cpu_active;    /* list of active CPUs */
extern int              ncpus;          /* number of CPUs present */
extern int              ncpus_online;   /* number of CPUs not quiesced */
extern int              max_ncpus;      /* max present before ncpus is known */
extern int              boot_max_ncpus; /* like max_ncpus but for real */
extern int              boot_ncpus;     /* # cpus present @ boot */
extern processorid_t    max_cpuid;      /* maximum CPU number */
extern struct cpu       *cpu_inmotion;  /* offline or partition move target */
extern cpu_t            *clock_cpu_list;
extern processorid_t    max_cpu_seqid_ever;     /* maximum seqid ever given */

#if defined(__i386) || defined(__amd64)
extern struct cpu *curcpup(void);
#define CPU             (curcpup())     /* Pointer to current CPU */
#else
#define CPU             (curthread->t_cpu)      /* Pointer to current CPU */
#endif

/*
 * CPU_CURRENT indicates to thread_affinity_set to use CPU->cpu_id
 * as the target and to grab cpu_lock instead of requiring the caller
 * to grab it.
 */
#define CPU_CURRENT     -3

/*
 * Per-CPU statistics
 *
 * cpu_stats_t contains numerous system and VM-related statistics, in the form
 * of gauges or monotonically-increasing event occurrence counts.
 */

#define CPU_STATS_ENTER_K()     kpreempt_disable()
#define CPU_STATS_EXIT_K()      kpreempt_enable()

#define CPU_STATS_ADD_K(class, stat, amount) \
        {       kpreempt_disable(); /* keep from switching CPUs */\
                CPU_STATS_ADDQ(CPU, class, stat, amount); \
                kpreempt_enable(); \
        }

#define CPU_STATS_ADDQ(cp, class, stat, amount) {                       \
        extern void __dtrace_probe___cpu_##class##info_##stat(uint_t,   \
            uint64_t *, cpu_t *);                                       \
        uint64_t *stataddr = &((cp)->cpu_stats.class.stat);             \
        __dtrace_probe___cpu_##class##info_##stat((amount),             \
            stataddr, cp);                                              \
        *(stataddr) += (amount);                                        \
}

#define CPU_STATS(cp, stat)                                       \
        ((cp)->cpu_stats.stat)

/*
 * Increment CPU generation value.
 * This macro should be called whenever CPU goes on-line or off-line.
 * Updates to cpu_generation should be protected by cpu_lock.
 */
#define CPU_NEW_GENERATION(cp)  ((cp)->cpu_generation++)

#endif /* _KERNEL || _KMEMUSER */

/*
 * CPU support routines.
 */
#if     defined(_KERNEL) && defined(__STDC__)   /* not for genassym.c */

struct zone;

void    cpu_list_init(cpu_t *);
void    cpu_add_unit(cpu_t *);
void    cpu_del_unit(int cpuid);
void    cpu_add_active(cpu_t *);
void    cpu_kstat_init(cpu_t *);
void    cpu_visibility_add(cpu_t *, struct zone *);
void    cpu_visibility_remove(cpu_t *, struct zone *);
void    cpu_visibility_configure(cpu_t *, struct zone *);
void    cpu_visibility_unconfigure(cpu_t *, struct zone *);
void    cpu_visibility_online(cpu_t *, struct zone *);
void    cpu_visibility_offline(cpu_t *, struct zone *);
void    cpu_create_intrstat(cpu_t *);
void    cpu_delete_intrstat(cpu_t *);
int     cpu_kstat_intrstat_update(kstat_t *, int);
void    cpu_intr_swtch_enter(kthread_t *);
void    cpu_intr_swtch_exit(kthread_t *);

void    mbox_lock_init(void);    /* initialize cross-call locks */
void    mbox_init(int cpun);     /* initialize cross-calls */
void    poke_cpu(int cpun);      /* interrupt another CPU (to preempt) */

/*
 * values for safe_list.  Pause state that CPUs are in.
 */
#define PAUSE_IDLE      0               /* normal state */
#define PAUSE_READY     1               /* paused thread ready to spl */
#define PAUSE_WAIT      2               /* paused thread is spl-ed high */
#define PAUSE_DIE       3               /* tell pause thread to leave */
#define PAUSE_DEAD      4               /* pause thread has left */

void    mach_cpu_pause(volatile char *);

void    pause_cpus(cpu_t *off_cp, void *(*func)(void *));
void    start_cpus(void);
int     cpus_paused(void);

void    cpu_pause_init(void);
cpu_t   *cpu_get(processorid_t cpun);   /* get the CPU struct associated */

int     cpu_online(cpu_t *cp);                  /* take cpu online */
int     cpu_offline(cpu_t *cp, int flags);      /* take cpu offline */
int     cpu_spare(cpu_t *cp, int flags);        /* take cpu to spare */
int     cpu_faulted(cpu_t *cp, int flags);      /* take cpu to faulted */
int     cpu_poweron(cpu_t *cp);         /* take powered-off cpu to offline */
int     cpu_poweroff(cpu_t *cp);        /* take offline cpu to powered-off */

cpu_t   *cpu_intr_next(cpu_t *cp);      /* get next online CPU taking intrs */
int     cpu_intr_count(cpu_t *cp);      /* count # of CPUs handling intrs */
int     cpu_intr_on(cpu_t *cp);         /* CPU taking I/O interrupts? */
void    cpu_intr_enable(cpu_t *cp);     /* enable I/O interrupts */
int     cpu_intr_disable(cpu_t *cp);    /* disable I/O interrupts */
void    cpu_intr_alloc(cpu_t *cp, int n); /* allocate interrupt threads */

/*
 * Routines for checking CPU states.
 */
int     cpu_is_online(cpu_t *);         /* check if CPU is online */
int     cpu_is_nointr(cpu_t *);         /* check if CPU can service intrs */
int     cpu_is_active(cpu_t *);         /* check if CPU can run threads */
int     cpu_is_offline(cpu_t *);        /* check if CPU is offline */
int     cpu_is_poweredoff(cpu_t *);     /* check if CPU is powered off */

int     cpu_flagged_online(cpu_flag_t); /* flags show CPU is online */
int     cpu_flagged_nointr(cpu_flag_t); /* flags show CPU not handling intrs */
int     cpu_flagged_active(cpu_flag_t); /* flags show CPU scheduling threads */
int     cpu_flagged_offline(cpu_flag_t); /* flags show CPU is offline */
int     cpu_flagged_poweredoff(cpu_flag_t); /* flags show CPU is powered off */

/*
 * The processor_info(2) state of a CPU is a simplified representation suitable
 * for use by an application program.  Kernel subsystems should utilize the
 * internal per-CPU state as given by the cpu_flags member of the cpu structure,
 * as this information may include platform- or architecture-specific state
 * critical to a subsystem's disposition of a particular CPU.
 */
void    cpu_set_state(cpu_t *);         /* record/timestamp current state */
int     cpu_get_state(cpu_t *);         /* get current cpu state */
const char *cpu_get_state_str(cpu_t *); /* get current cpu state as string */


void    cpu_set_curr_clock(uint64_t);   /* indicate the current CPU's freq */
void    cpu_set_supp_freqs(cpu_t *, const char *); /* set the CPU supported */
                                                /* frequencies */

int     cpu_configure(int);
int     cpu_unconfigure(int);
void    cpu_destroy_bound_threads(cpu_t *cp);

extern int cpu_bind_thread(kthread_t *tp, processorid_t bind,
    processorid_t *obind, int *error);
extern int cpu_unbind(processorid_t cpu_id, boolean_t force);
extern void thread_affinity_set(kthread_t *t, int cpu_id);
extern void thread_affinity_clear(kthread_t *t);
extern void affinity_set(int cpu_id);
extern void affinity_clear(void);
extern void init_cpu_mstate(struct cpu *, int);
extern void term_cpu_mstate(struct cpu *);
extern void new_cpu_mstate(int, hrtime_t);
extern void get_cpu_mstate(struct cpu *, hrtime_t *);
extern void thread_nomigrate(void);
extern void thread_allowmigrate(void);
extern void weakbinding_stop(void);
extern void weakbinding_start(void);

/*
 * The following routines affect the CPUs participation in interrupt processing,
 * if that is applicable on the architecture.  This only affects interrupts
 * which aren't directed at the processor (not cross calls).
 *
 * cpu_disable_intr returns non-zero if interrupts were previously enabled.
 */
int     cpu_disable_intr(struct cpu *cp); /* stop issuing interrupts to cpu */
void    cpu_enable_intr(struct cpu *cp); /* start issuing interrupts to cpu */

/*
 * The mutex cpu_lock protects cpu_flags for all CPUs, as well as the ncpus
 * and ncpus_online counts.
 */
extern kmutex_t cpu_lock;       /* lock protecting CPU data */

/*
 * CPU state change events
 *
 * Various subsystems need to know when CPUs change their state. They get this
 * information by registering  CPU state change callbacks using
 * register_cpu_setup_func(). Whenever any CPU changes its state, the callback
 * function is called. The callback function is passed three arguments:
 *
 *   Event, described by cpu_setup_t
 *   CPU ID
 *   Transparent pointer passed when registering the callback
 *
 * The callback function is called with cpu_lock held. The return value from the
 * callback function is usually ignored, except for CPU_CONFIG and CPU_UNCONFIG
 * events. For these two events, non-zero return value indicates a failure and
 * prevents successful completion of the operation.
 *
 * New events may be added in the future. Callback functions should ignore any
 * events that they do not understand.
 *
 * The following events provide notification callbacks:
 *
 *  CPU_INIT    A new CPU is started and added to the list of active CPUs
 *                This event is only used during boot
 *
 *  CPU_CONFIG  A newly inserted CPU is prepared for starting running code
 *                This event is called by DR code
 *
 *  CPU_UNCONFIG CPU has been powered off and needs cleanup
 *                This event is called by DR code
 *
 *  CPU_ON      CPU is enabled but does not run anything yet
 *
 *  CPU_INTR_ON CPU is enabled and has interrupts enabled
 *
 *  CPU_OFF     CPU is going offline but can still run threads
 *
 *  CPU_CPUPART_OUT     CPU is going to move out of its partition
 *
 *  CPU_CPUPART_IN      CPU is going to move to a new partition
 *
 *  CPU_SETUP   CPU is set up during boot and can run threads
 */
typedef enum {
        CPU_INIT,
        CPU_CONFIG,
        CPU_UNCONFIG,
        CPU_ON,
        CPU_OFF,
        CPU_CPUPART_IN,
        CPU_CPUPART_OUT,
        CPU_SETUP,
        CPU_INTR_ON
} cpu_setup_t;

typedef int cpu_setup_func_t(cpu_setup_t, int, void *);

/*
 * Routines used to register interest in cpu's being added to or removed
 * from the system.
 */
extern void register_cpu_setup_func(cpu_setup_func_t *, void *);
extern void unregister_cpu_setup_func(cpu_setup_func_t *, void *);
extern void cpu_state_change_notify(int, cpu_setup_t);

/*
 * Call specified function on the given CPU
 */
typedef void (*cpu_call_func_t)(uintptr_t, uintptr_t);
extern void cpu_call(cpu_t *, cpu_call_func_t, uintptr_t, uintptr_t);


/*
 * Create various strings that describe the given CPU for the
 * processor_info system call and configuration-related kstats.
 */
#define CPU_IDSTRLEN    100

extern void init_cpu_info(struct cpu *);
extern void populate_idstr(struct cpu *);
extern void cpu_vm_data_init(struct cpu *);
extern void cpu_vm_data_destroy(struct cpu *);

#endif  /* _KERNEL */

#ifdef  __cplusplus
}
#endif

#endif /* _SYS_CPUVAR_H */